How to arrange beautiful beds for the lazy, the beds are high and smart - this is what you need to know the gardener who wants to make his life as independent of the garden worries. If desired, you just need to master the way lazy Greasok.which you can see in the following photos. Girling of this type will allow you to enjoy the deserved holiday in the country and will not be able to demand a weeding every time. In addition, it is not only convenient, but also increases the productivity of cultures.
Everyone knows how much time and effort needs to be given to each planted culture, which, however, sometimes do not even justify the result: Saplings may not germinate or do not result in a normal amount of harvest. In this case, it is worth paying attention to the technology of lazy beds on your site!
Beautiful and convenient
Lazy Ginochka - absolutely new approach To the care of the garden, which will allow seedlings to grow by themselves and will give several times more harvest. The basis of its basis is the rule that states that digging and so far is impossible, except for its preparation and landing. Let even with constant weeding you can withdraw the weeds and flush the earth, sooner or later it dries down and will not be able to give enough moisture for cultures.
In this approach, the preparation for the future landing is very important - it is desirable to do this since autumn when you can collect the material for the soil mulch (it is necessary to cover it with straw, sawdust, cones, etc.), which, in turn, will not give weeds Greet in a plot with such a cover.
- Install the watering system yourself. Optionally choose the most expensive systems available in stores. In the case of such vegetables, those from which you will only need to press the button are suitable - and the need to water with your own hands will disappear. Watering will allow you to make beautiful beds: Green and lush. It is also worth noting: watering can become infrequently, but abundantly, giving the plants the necessary moisture until the next arrival.
- Tool for work in the garden - the key to saving time. Therefore, it is worth choosing one inventory for many years. It may include not only familiar shovel and shoulder, but also different little thingswho make your work facilitate. Also find the place in advance for the inventory.
- At the beginning of the planting season, just open the Earth once, prepare it for future seedlings or seeds. Site plants and no longer disturb the land: Mulching will make your business and keeps away from weeds. Everything that you will have before removing the harvest - to water the beds in time in the country.
This is an interesting I. effective methodwhich is suitable for both lazy gardeners and experienced, knowledgeable of gardeners. The garden of this type will justify the applied efforts and will be able to bring a lot of amenities.
High beds as a way to obtain an intensive harvest
Let it be very laborious at first the process is the construction of the carcass itself and watering the beds, but it will allow you to forget about a bad climate and low yield.
High beds are always under the rays of the Sun, which contributes to the warming of the layer of the Earth, so it can be placed in April without fear of freezing, and the lower grid will prevent the intrusion of moles and mice. Not too wide framework (within 150 cm) will allow you to care for the garden on both sides. If you split it into two strips of 80 cm wide - you can even make it yourself greenhouseHaving a film over both landings. It is worth noting that it is high beds that give the most early yield First salads, and then picky vegetables. The only problem is more frequent watering, as water is not delayed in such an earth for a long time.
Despite all the difficulties in the beginning, the landing justifies the efforts embedded in her and for a long time, without bringing special trouble, and the garden has a beautiful view.
Screwing a smart bed for fragrant herbs only once, before planning seedlings. Next, it requires a minimum of attention and care.
The market offers a large number of Materials allowing you to create high beds with your own hands in the country. This method annually grows various vegetable crops, getting abundant yields. For example, the advantages of high fences from pallets are convenience and order. Plastic beds also have certain advantages. At the same time, high buildings occupy a lot of space, which is considered their disadvantage.
Beautiful high gardens
The presence of areas of fertile land in sufficient quantities is suitable for the creation of greenhouse structures. Implement the arrangement of high heat with their own hands in this way better as required by:
- Correct selection of bed seats.
- Determination of the size of the site.
- Manufacturing of framework made of girlfriend.
- Filling the fence fence with fertile soil.
- Availability protective coating Constructions.
- Periodic harvest.
Option from the board
Beautiful fences are suitable for early sowing various varieties and plant species. They possess several advantages:
- suitable any well lit places on cottage plot, including areas with stony or;
- harness of the contents of the box intensively occurs in the spring;
convenient watering; - protection against bad weather and ensuring mulch safety;
- the presence of a drainage layer excludes moisture stagnation;
- put and pour large squares no longer required;
- use sand or crushed stone to frown paths between rows.
Wooden box
Create high beds in the country with their own hands is recommended to solve a number of problems related to slow development vegetable crops. Fences are created individual conditions Growing seedlings when choosing the most suitable soil. It is important to ensure a permanent watering of the beds so that there is no fast evaporation of moisture.
Materials for fence
In the manufacture of boxes, logs are used, bricks, straightened or stone. If you build it from pallets with your own hands, red or cedar tree, it will increase the service life of the structure. The bottom inside it usually ends plastic or protecting against rodents.
Device high beds Does not require expensive devices. For example, making a box from your own hands, it is better to pull the film from polyethylene. Pre-establish arcs from metal or. The greenhouse must have dimensions corresponding to the dimensions of the beds from bricks, wood, blocks or stone. This will protect seedlings from frosts, will prolong the harvest period.
When it is better to do and what to plant
Autumn or summer end is more suitable periods for creating raised beds with their own hands. If you start working in the spring, during this period the impact of emerging processes on the development of seedlings is very weak and imperceptible.
Fencing created in spring, it is better to fill a month before the seedlings landing.
Such gardens will decorate the yard
To fill high beds in the country, with your own hands, the photos of which are presented below, in more than Suitable autumn period.
It was when the development of internal processes continues in Earth. Over the summer layers in the box provide the root system of plants. Getting useful elements in the optimal volume.
Alternating plants
Seedlings are usually planted immediately after the construction of structures. After the collection of ripened vegetable crops, they begin to alternate them every year with their useful greens, such as parsley, dill. This allows you to get abundant yields every year.
Great Overcome for Strawberries
The internal decomposition process will prevent the freezing of strawberries during strong frosts. This is possible if high beds for strawberries in winter covered with snow or special Material. Hutting plants B. warm Grocery., It is convenient to grow them in it because of the smallest evaporation of moisture.
High beds for cucumbers and tomato
The gardening for cucumbers or tomato is constructed according to the principle resembling a method for improving the growing fence. The only difference lies in the need to install supports with crossbars on the edges, providing garter of cultures. Each cucumber vacuum tied with a stretched between wire gives abundant yield.
Most appropriate place In the country, it is often equipped with several boxes. By making them on the lawn, leave a place to work with a lawn mile. It is necessarily provided between the rows a certain distance for delivering fertile soils, mulch or fertilizers in special cars.
Preparation of Korobov
Treatment of wood material
Boards are cut taking into account the size of the frame. Dangerous to human health substances should not penetrate the ground, so processed wooden elements Surride film. Then we carry out the processing phased. This requires:
- Split the timber on the segments of 50 cm.
- Soak by protective composition.
- Perform dry material.
Various location options on the site
The ground is dripped simultaneously with fine grass to increase the water permeability of the soil. If there is enough dense land, you can remove the turf with the markup. The advantage of the placement of the box from the board is that it does not need to remove too much ground layer.
Mounting frame with your own hands
Design device
Marking, made before creating a fence, allows you to build perfect smooth design. When installing, check the dimensions of all components of the box. The frame is made true if the diagonals of opposite angles are the same.
Step-by-step instruction that allows you to create high beds with your own hands, assumes the execution of several main stages:
- Transfer the frame to the area with markup.
- Set shields according to the markup.
- Make recesses for support.
- Check the accuracy of installation of shields to the level.
- Remove the excess soil or lay the pegs.
- After graduating from the manufacture of high beds, fertile soil is being added to each of them.
Compost preparation
Soil mulching causes more intensive moisture evaporation. In the compacted soil it is impossible to leave the lumens.
Filling Grokes
Before filling, the bottom of the construction is covered, which is nourished along the edges of each wall. Provide protection of plants from rodents. The stacked layer of geotextile will prevent germination in the soil of weed grass.
Filling scheme
Step-by-step instructions include the following steps:
- Fly geotextiles with dry sprigs, bark, large sawdust, chips, leaves.
- Share compost layers, bird litter.
- Close up the organic grass, fallen leaves or bark.
- Make required amount Mineral fertilizers.
- Put a fertile soil.
The thickness of the generated layers is usually 10 cm, they are not mixed with each other. Each of them is well compacted and aligned. Creating a fertile layer involves the application:
- tops;
- sawdust;
- peat;
- wood ash;
- siderates;
- reworked manure;
- bird litter, etc.
The video tells how to make a high garden ridge.
If the beds in the greenhouse do with their own hands are made of fertile soil, it significantly increases yields. To compact them several times it is required to pour large quantity water.
If the composition of the Earth is not fertile, then the purchase of the purchase is suitable, which is shedient by plenty of water. Then they are waiting for two days, during which the layers will be able to settle. The compacted fertile land from above is necessary to cover together with the frame of the agrofibular black. This will warm it to the greatest degree and prevent the germination of weeds.
Reading time ≈ 12 minutes
Earth handling in the country area always requires a lot of time and strength. Each plant and vegetable culture requires a certain degree of moisture for good maturation, and the rod waters are often higher than usual. The solution of this problem was high beds, you can make them with your own hands with step by step instructions from specialists.
Features of high beds
High and smart is a real find for summer residents, they are suitable for growing any plants: vegetable crops, greenery, berries, fruit trees and garden flowers.
High raised fences have a lot of advantages:
The disadvantage of the raised structures can be considered frequent fertilizer, reinforced feeding with minerals and watering the beds, as the soil inside such structures dries quickly. You can cope with this problem by organizing a system of autopolivation or inspired soil.
Optimal dimensions:
Optimal height Perennial should be up to 20 centimeters, otherwise the soil will get out during the winter frost.
Construction of such structures on their country plot Does not require large financial investments, so they are so popular among summer residents. Production of high beds with their own hands is shown on video with step-by-step instructions.
Greeting varieties
For the organization of the garden on the country site, several types of beds are used:
High funny beds There are also:
How to choose Material
What makes a high design on your garden? First you need to choose a material suitable for a particular area. Raised beds can be:
- From wood. Plus this material It is its availability, convenience and environmental friendliness. To assemble the design, boards, bars and logs different sizes. Before using wood, it is necessary to treat with special antifungal and water-repellent solutions to protect the bed.
- From slate. The assembly of such a design is light and fast, the material is affordable and inexpensive. Slate is fragile enough, so it requires accuracy during installation and further operation. The fence can be painted and painted with ornaments of different colors.
- From brick. The plus is considered the durability and strength of the structure. Brick or stone beds fit perfectly into any landscape, but are characterized by a high cost and a complex manufacturing process. The components of the elements must be connected by concrete solution. However, in too massive installations, the Earth warms up slower, therefore it is impossible to overdo the layer thickness.
- From rods and vines. Frames for beds can be weave from small branches and rods of trees. This design looks original and elegant, can be used as decor. Such woven structures should be made from the inside to lay the layer of polyethylene film so that water does not succeed. The disadvantage is their short-life, the service life will be no more than one season.
- Metal. Such structures have a long service life, durable and stable. Made by erection of welding frame metal elements. The material must be coated with an anti-corrosion composition for comfortable use and durable service.
- From plastic. Material is durable, durable and easy to install. However, some species plastic sheets Can be released toxic and harmful substances for plants.
- From concrete. Used to erect multi-tiered structures. The fence can be made of both separate blocks (both in the photo) and be monolithic. Concrete beds are durable and can be decorated with various decor. Installation process is complex and long.
- Metal grids and pebbles. You can make a garden on the technique of "Gabion", which is used to build the flower. Such a falling fence consists of double carcass Grids, the inner wall covers the film, and small stones and pebbles are poured between the frame racks.
Technique "Gabion"
For the manufacture of dackets, sometimes used budget material, eg, plastic bottles, old empty boxes and small segments of plastic fences.
Making high beds with their own hands is shown on the video.
How to choose a place
It is imperative to choose the right place for the construction of a high bed in the country area. It is necessary to carefully study the territory and draw the design scheme of structures.
What you need to take into account when the garden of the garden with raised beds:
- The surface of the soil should be smooth and, desirable, without strong slopes.
- The place should be well covered by the sun.
- It is necessary to take into account the shadow from standing near the trees.
Create a framing is only a small part of the work, it is also important to fill the factor in the ground. You need to start these works already since the autumn. Internal filling consists of several layers of various widths. The dimensions of each layer depend on height and beds.
How to fill the construction of the soil:
- On the bottom it is necessary to put fine metal grid or geotextile to protect the garden from small rodents and pests.
- Then the first drainage layer is stacked from slices of crushed bark, branches, dry leaves, plants and chips stalks.
- The second layer is various fertilizers, such as manure.
- The third layer is usually formed by waterproof material: cardboard, pure paper or old natural burlap.
- To create the next fourth layer, a organic product will be required in the form of plant remains and a small amount of mineral fertilizers.
- As the last fifth layer, fertile soil serves, the layer is stacked with a thickness of 10 centimeters. Select the soil follows depending on the cultivated crops.
As soon as the high bed is completely filled with the earth, it must be abundantly pouring and leave for 3 days, during this time the layers will fall a little. Then the design is covered with polyethylene so that the soil warms well. And only in the spring you can start cropping seeds or plant planting. Step-by-step process The construction of such a bed is shown in the video below.
Groke-box from boards
Most often, summer residents give preference to wood when it comes to the manufacture of sides for high beds. The plus of this material is the fact that the tree does not overheat and easily refuses to process.
It is better to use the boards of ash, oak, cedar or larch. Pine is considered a budget option, since this breed of wood is more susceptible to rotting.
High beds-box do it yourself
Required tools and materials:
- Wooden boards 50 * 200 mm.
- Metal grid.
- Nails and hammer.
- Protective mixture for impregnation.
- Shovel.
- Roulette la measurement.
- Cutting stood.
Manufacturing process:
To create a design, both smooth and wavy slate is suitable. At the end, the material can be painted in any color with special acrylic paint.
Materials and tools:
- Sheets.
- Bulgarian (can be replaced with electric jigsaw).
- Shovel.
- Chalk or simple pencil.
- Drill (can be replaced with a screwdriver).
- Roulette for measurements.
- Rubber hammer.
- Building level.
- Tree pegs or rods from metal.
Girling out wavy slate on the summer plot
Manufacturing technology:
High beds have different design, shape and dimensions. With the help of such structures, you can implement any ideas and be unrecognizable to transform your country area. The vegetable garden will look well maintained, and the harvest please your quality!
Send the material to you on E-mail
Work on the garden takes a lot of time and strength, so each dacket tries to simplify the process of planting and care for harvest. The main problem is the need to be for a long time in a bent position, which is why the backache hurts and the headache can begin. But this can be avoided by organizing high beds in the country with their own hands. Photo I. detailed description The technologies of the device given in this article will help determine the type of beds and the material from which they are better to construct.
Original high multi-level construction will be the highlight of your landscape
Raised gardens are all rapidly gaining popularity, they are used not only for growing vegetables, but also for planting colors (). Through the use of various materials for the construction of sobbers for the bed (or flower beds), some options have a very attractive view, due to which are increasingly used on open areas Groomed. However, in order to correctly arrange high beds with sides, you need to know some features of such an organization of space in the garden.
Tip! Do not cost to arrange high beds in southern regions. In them, the Earth is so sufficiently warming up, and with such a landing, the roots of the plants can burn.
Features of high beds
First of all, recommendations should be followed by the size of such beds:
- Height.
Of course, the main thing is to with new Grocery It was convenient to work, the optimal is considered to be the arrangement at the level of the waist, but in each particular case everything is individually, so focus on your feelings.
In addition, the height depends on the degree of soil fertility. So for fertile soil minimum value - 15 cm, for non-fermentation - 30 cm.
- Length and width.
The length of the design can be any (how much allows your garden), the main thing is to additionally strengthen the extended areas by retaining columns. Widget worth paying special attention. It is desirable to plant no more than two rows of plants in a bed of 90-120 cm wide. So they will receive a sufficient amount of sunlight, and you can easily reach everyone.
Next, you must select the installation site of a high bed. In this case, the quality of the soil of a particular area does not matter much, as it will not participate in ensuring the vital activity of the plant. The main thing is to check if a sufficient amount of light falls on this section of the garden, it is desirable that the sun's rays illuminate plants at least 5 hours a day.
In high beds, almost everything can be grown: from vegetables to berries. However, too high plants (for example, corn) in them is not planted due to the complexity of the subsequent care.
Pros and cons of high beds
Many daches continue to use ordinary bedsdespite their inconvenience. In comparison, C. traditional way devices high designs Possess the following advantages:
- Soil under such beds can be any.
Here we are talking As about its quality (fertility, sand and stones) and the features of the landscape (high beds can be arranged even on the slope without sacrificing harvest).
- Easy installation.
With the arrangement of such beds, it does not require the use of technically complex tools and materials, there will be enough remedies, and what remains of the construction site (for example, slate, boards, and so on).
- Easy operation.
Landing, watering, harvest - everything will be easier and faster than with a traditional device. This is especially important when working with low-spirited cultures, for example, high beds for strawberries will be salvation for any dachank, because the search for this berry takes a lot of time.
- The soil blur during irrigation is excluded (subject to properly organized sides of sufficient strength and height).
- Less weeds.
Due to absence direct contact with the rest of the garden. In addition, the soil in high beds is easier to fertilize and update to achieve maximum quality.
- Increased resistance to diseases is characteristic of plants grown on such beds.
- The possibility of an earlier landing.
When the Earth has not yet relieved and even the landing is not started in the greenhouses, the high beds are ready, since the working layer of the soil is above the level of the Earth, and hence it hears much earlier.
- There is no need to tie the plants (for example, cucumbers and tomatoes), you can leave them drawn down.
- Instead of extracting, you can shallow ground to loose, which reduces the time and forces spent on the care of the harvest.
- The land is not attached from walking, therefore it remains the loose longer, feeding a sufficient amount of oxygen to the root system.
- Attractive appearance.
There are many materials suitable for the arrangement of high beds, so you can pick up perfect optionwhich will be the highlight of your site.
Nothing perfect, so the shortcomings of the beds of this type also there:
- Fast soil drying.
Main flaws this method The arrangement of the territory, due to which it often becomes inexpedient (especially on the elevated areas). Can be corrected by frequent watering, the best way - The device of the drip irrigation system (then the soil will be evenly wounded throughout the thickness without your participation).
- Installation takes a lot of strength and cash.
This drawback is controversial, as the forces spent on the arrangement of such a bed - nothing in comparison with the forces that will be required to process the traditional bed. As for the money, their investments can be avoided if used to use sweater materials.
- Soil freezing in winter.
Because of the small volume of the soil, it makes faster and stronger than when traditional landingWhat can adversely affect perennial cultures.
Tip! To simplify the care of harvest, set the system in advance. drip watering. So plants will receive the same and sufficient number nutrients Without your participation.
Article on the topic:
This article is told how the most easy to do in the country. Photo and description most good ideas, as well as methods of their incarnation, should help make your plot comfortable and well-groomed.
How to make a high bed in the country with your own hands: species, materials
If you want to make non-standard beds with your own hands, first need to understand the types of such structures. Dachniks distinguish the beds by constructive features and a method of organizing a side.
The design of the garden is:
- High.
- Multi-level.
The most frequent occasion is the construction of a multi-tier bed for strawberries, with their own hands it is easy to do, and the harvest time will be reduced significantly.
- Vertical.
In addition to the form of the bed, you need to choose the material of the side. Usually used primary means, but to achieve the best result, it is advisable to accommodately approach the choice. In fact, flights can be made from anything, but the most famous and convenient are considered:
- Wood.
Buy boards for high beds can be quite inexpensive, so the tree in this case is used often. However, this material has a significant disadvantage - ants and other insects are often breeding, which affects the quality of the harvest. If this happened, you need to replace flights.
- Slate.
- Plastic.
Durable and unpretentious material, but it is worth paying particular attention to its quality, especially environmental safety.
- Brick.
Durability and attractive appearance are the main advantages of this material. Disadvantage - price, but if bricks remained from construction, such a decision will be a great choiceohm.
- Plastic pipes.
Excellent suitable for the device vertical beds, as they are very easy to mount.
What kind of construction has a high bed? To install it, you need to install flights from the selected material, then sequentially set the following layers:
- Geeking to prevent the rapid care of nutrients into the soil during watering, as well as to protect against pests and weeds.
- Drainage (it can be rubble, brick debris and so on).
- Grass and peat.
- Priming.
Article on the topic:
What are their advantages, examples creative solutions, average prices, consumer reviews, how to assemble the beds from the panels properly. About this and many other things - read in our review.
The device of vertical beds do it yourself: photo, technology review
Vertical beds - one of the varieties of high, more precisely - an extreme degree. They are the ideal solution For small sections, as it is helped to use free space as rational as possible.
Vertical beds have the same advantages and disadvantages that simply high, only more (for example, the soil processing is required even less, and the lack of moisture is even stronger), but there are other advantages of such arrangement:
- Significant savings area.
This design can be attached even to the wall of the building, most importantly - so that a sufficient amount of sunlight falls on it.
- Mobility.
Any vertical bed can be equipped with wheels for quick movement to another place. But without them, some designs have very low weight, thanks to which the movement does not take a lot of time and effort.
Vertical beds can be designed almost from any material, the main thing is that it is durable, durable and environmentally friendly. The highest quality constructions that have already used a large number of summer residents:
- Crying-pyramid.
- Girling out plastic pipes.
- Vertical beds from the grid.
- Using pots.
- From tires.
Not every dacket is ready to spend time and strength on the construction of a vertical bed for strawberries and other low-spirited crops, so many are resorting to the purchase of this design.
How to buy vertical beds for strawberries and other low-spirited crops
Thanks unique designVertical beds purchased in specialized stores are very popular. When buying it is important to pay attention to the following points:
- Check if the material matches the design of environmental and fire safety standards.
- Sign up size with existing area.
- Specify the possibility of watering plants (some modern models Vertical beds are equipped with channels for efficient irrigation).
- Find out what plants fit this system (Each Plant has its own landing depth, it is necessary to solve this question Before buying to avoid subsequent problems).
The market presents a large number of both expensive and modern and budget models of vertical beds. However, if you do not want to spend money, you can do a good system independently from the remedies.
Step-by-step production of bed-pyramid for strawberries do it yourself: sizes, features
An independent erection of a pyramidal bed for strawberries is a rather complicated and long process. To begin with, you need to stock the following tools and materials:
- Sliced \u200b\u200bwood board drawings.
They must be covered with oil and varnish to increase the service life. It is prohibited to use chemicalswhich quickly absorbed into the ground and affect the safety and taste of berries.
- Nails.
We are selected depending on the thickness of the wood used.
- Hand tools (hammer, planer).
- Plastic tube with holes over the entire length.
- Soil and humus for filling the frame.
- Grid.
First of all, we prepare the base for the pyramid and put the grid on it. Then we set the lower tier on it and fall asleep inward soil (about 150 mm).Now it is necessary to install a plastic tube in the center for watering, while tightly closing the bottom hole. Next stacked humus.
All layers are repeated in the above order until the desired height is reached. It is important to reduce the size of each subsequent flow frame with a pyramid design for maximum illumination of the lower layers, as well as ensuring the optimal load on them.
Step-by-step production of vertical beds from plastic pipes for strawberries of greenery or colors
Among the vertical beds are very popular with structures from plastic pipes due to the cheaper and ease of installation and maintenance. In the manufacture of vertical beds from plastic pipes, one or two pipes can be used. Consider the first option.
Must be taken sewer pipe 2.5 m and diameter long, allow, 110 mm. When installing, a third of the pipe is burned to the ground to ensure the stability of the structure, in the rest, it is necessary to make holes with a diameter of 3-4 cm for planting plants in them.
After reliable fastening the pipe, we fall asleep into the holes in advance prepared soil. At the same time, it is not necessary to buy a specialized mixture if a fertile land can be used on the site, it can be used. Strawberry seeds (or other plants) can be immediately mixed with the soil or add them later into the available holes (which is the best option).Watering the system is carried out from above, while water goes to plants not quite evenly, so it is better to make a two-pipe system.
Feature of mounting two-pipe beds from pVC pipe Its hands lies in inserting a pipe of a smaller diameter to a large. Watering will be carried out through a narrow pipeline in which small openings need to make water distribution. The soil in this case is filled with the space between the pipes.
The main advantage of such systems is the ability to pull them out of the ground, put and hide on winter (which is especially important for strawberries).
Using a construction grid for the device of vertical beds with their own hands
Use a metal grid to create high beds in two ways:
- As a reference design.
In this case, it is necessary to use thick reliable gridwhich will be able to withstand a decent weight. In this case, the grid is tensioning between supported pillars (or house corners), plunges slightly in the ground and securely fixed. Now you can insert pots or bottles with plants. This option is great for growing seedlings or other plants, which will later need to transplant.
- Grid + polyethylene.
Initially, the grid is stretched, then it is attached to it polyethylene filmAnd already between them is covered with humus grounds. This design is suitable for growing greenery, onions and other small plants. It is not strong, so the best way to fasten is to the wall of the house. But even then it will not last for more than 3-4 years.
A vertical bed is placed in this case (for cucumbers, grapes, and so on) in this case. This method is much more convenient than the standard tapping to the sticks.
How do you make a vertical bedding for strawberries or other low-layered plants with your own hands?
Cocpoch's bed is capable of decorating your landscape, since this design is an original decisionMoreover, opening the possibilities for the manifestation of fantasy. To create such a vertical bed it is necessary:
- Several caspo.
It is not necessary to look for pots of the same size, different will also become an interesting solution.
- Bar or pipe.
For fastening and ensuring the stability of the structure.
- Soil and seedlings.
- Paint (optional).
If you use pots from ceramics, which are pretty heavy, the pipe for the stability of the design can not be used. The main thing is to reduce the size of the chest as you move up and do not do the design too high.
If you have light plastic pots, through a water hole you need to turn the pipe (or bar) that will be the basis for the system. Cachepo can be placed chaotic, coloring in different colors, decorated - everything depends on your imagination.
Important! For the stability of the design, it is necessary to deepen the pipe (or timber) to the ground. Otherwise, the pots will be fixed only among themselves, which does not interfere with the tipping of the structure with external effects.
Making your own hands vertical beds from tires for strawberries: photo, features
Production of a garden or flowerbeds made of tires - the method is quite famous. However, most dachants use tires only to enhance the flower beds, that is, creating only one level.
There are several ways to use automotive tires To create vertical beds:
- Installation of multiple tires in a checker order.
In this case, you can paint them different colorsBy creating the solar mood to any weather.
- Installation of tires of different diameter in the form of a pyramid.
You can also cut through the slots in the tires, then the vegetation will be not only on horizontal surfaces, but also throughout the volume of the structure.
- Creating a high bed using a few tires.
Article
Work in the garden and plant care takes a lot of time and strength, and the results are not always equivalent to labor costs. Increase yields in the country area and relieve physical labor will help high beds. Grow plentiful harvest without donating the back, it is easy - high beds just make it yourself.
Example of a classic high bed in the country
For this not needed complex tools and special skills.
Pluses of high beds
High or smart Groki. practically perfect way For growing any plants: vegetables, berries, fruits, greenery or colors. Compared with traditional beds in high fences, many advantages:
Arrangement of high beds using unleisited boards
Materials for the construction of smart beds
High beds with their own hands can be made from various building materials, these are the most popular of them:
Parameters of high beds
When installing high beds, some recommendations should be followed and the following features should be taken into account.
Optimal height
Length and width of raised beds
The length of the beds is unimportant, you can make any length - how much the territory of the site allows. The only condition - long beds need to be strengthened with additional jumpers or retaining columns.
On the width of the garden you need to pay closer attention:
Where to install a high bed
If the nature of the soil does not have much importance for smart beds, then sunlight is important for any cultures. For landing, you should choose a plot to which direct sunlight falls at least 5 hours.
Before filling in the bed, follow these steps:
- A construction grid is nailed to the bottom of the box - it will protect the plants from rodents and mole;
- There is no further cardboard or geotextiles - weeds through such a barrier do not break, and the water will not be stated.
What to plant
You can land in high beds. You can practically any vegetables, berries, greens or flowers. On decorated beds, it is possible to make crop rotation every year, changing cultures in places. Only plants like sunflower or corn, grow in such boxes is not very convenient due to high-growing stalks.
High beds from boards do it yourself
Wooden boards are the easiest and ecologically safe method Make a bed for a garden. In addition, this material is always available.
However, many gardeners rightly believe that such processing reduces environmental safety Material and this is reflected in the quality of the grown fruits and vegetables. Most eco-friendly method Extend the life of wood -. It is even better to use boards with good resistance to rotting - larch or oak.
Making a high bed of BRUSEV
Also after antiseptic processing from inner Crichet can be sewn to limit soil contact with wood treated chemistry.
Inventory and materials
The following tools and materials will be needed for assembling a wooden bed:
- boards 5x20 cm;
- 5x5 cm bars;
- hacksaw;
- self-tapping screw;
- screwdriver or screwdriver;
- shovel;
- construction level and roulette;
- construction grid.
Installation of a high garden
Filling a high garden
Groke is ready, now you need to fill it up. The effectiveness of smart beds is achieved by their right layered filling:
- Initially, you can put cardboard to protect the beds from the germination of weeds.
- A small layer of sand is poured into the cardboard.
- Organic layer - long rotting organic material (branches, bark, rude thick tops, chips).
- Plant remnants - plant tops, vegetable and fruit cleaning, leaves, not perennial weeds.
- The garden is spilled by water, and it is better for the presentation of manure and the fertile land is 15-20 cm.
High beds from slate
Slate is simple and a budget option For the device of raised beds. And if this roofing material lies dead cargo after replacing the roof, then this is also a free way to make smart beds on panstone.
The advantages and disadvantages of the slate for the bed of bed
The advantages of the construction slate are as follows:
- low cost;
- durability;
- stiffness and strength;
- chemical neutrality;
- neat appearance.
Minus Bordeur from Schifer - Strong heating in hot weather. Plants will need more frequent watering.