Entrance groups for a country house. Features of entrance groups in cottages

All the usual porch or several steps gradually turned from a modest dacha functional element or rural house In the input group, which largely determines the entire appearance of the cottage facade.

This is the main entrance to the house, usually including a definite external design and an intermediate compound, which is some type of gateway chamber between indoor room and the external environment that creates an air temperature curtain.

It is one of the central elements of the design of the facade of the building forming the entire architectural style of the construction. It should provide a number of important features:

be convenient not only for the entrance, but also for the transfer of furniture, large household appliances, musical instruments etc. ;
protect against wind, rain, snow;
serve a tambour to maintain heat or coolness;
reduce the number of pollution from the streets;
provide protection against hacking and unauthorized penetration.

As a rule, the entrance group has the following set. elements:

Entrance door or doors with optional windows or without them.
A small terrace or platform along with a terrace of various configurations in front of the entrance door;
Steps, stilobate or porch with railing and / or fence or without them;
Lantern, canopy, protrusion or visor over the platform, the porch or the entrance itself;
Engineering and lighting equipment (dust- and dirt protection systems, air curtains, lamps, automatics of door opening) and so on.
.

Often the entrance group decorated:

balustrades, railings;
columns;
stairs of various configurations;
forged or carved details;
decorative highlighting devices, etc.

Materials

Materialsfor the input groups, they are selected depending on climatic conditions, size of the plot and the presence of space in front of the building facade.

They demand selectionin terms of compliance architectural style and designer decision:

Brick and stone buildings are well combined with various options wooden entrance groups;
In the decisions of the modern style, wins for the use of metalplastic and metal of various colors with large quantity glazed surfaces;

Visor looks better if it is created from the same materials as scope roof building;
Input staircase or steps, as well as a platform or stilobate in front of the entrance door should be harmonized not only with the entrance, wall and visor, but also with the base of the construction;
Similarly, it is also necessary to select material and for railings, balustrade and other fencing of the input group.

For entrance groups applied: Wood, stainless steel, brass, aluminum painted with polymer black metal, bronze, brick, concrete, a natural stone, plastic, polycarbonate, metalplastic and various roofing materials.

Of glassthe following are usually used:

triplex;
red
optivat;
double glass;
armored;
float;
transparent;
toned;
patterned;
matte;
corrugated;
sunscreen;
K-glass (energy saving), etc.

IN lately For entrance groups popular aluminumprofile as well as PVC and wooden profiles. All these profiles differ in durability, strength and weight, but, in any case, they are pretty light, self-supporting, durable, easy to install and look attractive.

Especially durable and expensive are products from glassesframed by a stainless profile. Strength characteristics This profile allows you to use glass and double-glazed windows of very large sizes.

Views and features

Entrance groups differ Based on materials, designs, the number of elements included in them, style, form and dimensions.

Among the forms are most common: arched, rectangular and complicated configuration.

Structurally need to highlight two view: Tambourg and entrance groups without a tambour. In the structures and of the other type 24 mm of single-chamber double-glazed windows, 32 mm double-chamber and 6 mm glass can be used. Applied and enhanced structures with a triplex instead of ordinary airless or tempered glass.

In the input groups are most often applied ordinary swingsingle or double doors, but there are also radial, as well as sliding or sliding (including automatic) doors. Regardless of the design of the door, there should be high strength, to ensure tightness and sufficient noise insulation.

Entrance groups dividedon decorative, protective, decorative protective, fire-resistant and bulletproof and burglar-resistant. The doors of increased strength are equipped with special powerful constipation, armored glass and superproof fittings. A multiple mechanism is often used, as it provides a hermetic fit doors throughout the perimeter.

Entrance groups are divided into warm and cold. In warm groups, a thermomost and three-dimensional profile of aluminum is used, and there is no thermal thermomost, and the usual aluminum profile is used.

Common input groups

Most often used nextentrance groups:

Only with a metal-plastic door. The cheap and simple variant in which there is no porch, nor steps, and the visor is made on the mounts to the wall and is made of polycarbonate.

Aluminum. More expensive, but more beautiful group, can have many options from very small outlooks, to a fully glazed wall.

Plastic. Cheaper aluminum and can be with polycarbonate instead of glass, which increases strength and reduces the weight of the structure.

Glass. It is made of widescreen sheets of glass. Quite expensive option. Less safe than triplex, but much more beautiful.

With terrace. A fairly expensive option, with a spacious space for relaxing outdoors. When the roof of the polycarbonate is closed, protection against precipitation or bright sun is ensured.

With metal welded staircase. Such a solution is suspicious. It allows you to have a durable entrance at minimum cost, and the product itself is easily attached to any style.

Techno. In this embodiment, there may be many designs of different prices, size and shapes made of double-glazed windows with a different metal or plastic profile and, as a rule, a warm tambour.

Wring. Usually used combination forged metal And stone or wood. Trump repeats form door Piece Or manufactured in the form of a triangle. This type has a high cost of wrought details.

Wooden. This solution can decorate both stone and brick and wooden houses. It is less durable than from concrete or brick, but traditionally highly appreciated by the owners due to charm natural wood. The use of wood allows you to use modern materials For the entrance door, which are harmoniously combined with it.

Listed only a few different types Entrance groups. But paying great attention to beauty, you must not forget about those utilitarian functions that must be performed by this architectural element.

An excellent addition for any entrance group is the design of the territory directly in front of the cottage facade.

Cost The input group fluctuates in large limits and depends on a number of parameters:

total construction sizes;
structural complexity;
construction type;
the number of opened flaps;
applied materials;
method of decorating metal, wooden and glass surfaces;
mounting conditions;
manufacturing speed;
the cost of fasteners;
the cost of shut-off systems, etc.

Advantages and disadvantages

Various materials allow you to achieve different decorativesolutions and provide utilitarian function to varying degrees. In this regard, it is extremely difficult to assess the advantages and disadvantages of non-affordable products.

To undoubted benefitsplastic structures include a large selection of colors. At the same time decoration metal carcasov Can be made with:

electroplating coatings;
application polymer coatings virtually any color;
wooden lining;
two-color (internal and external) color, which allows to obtain many options combined with any other materials.

Glass and glass fillings can be decoratedvia sandblasting machines, Silkographic, photo printing, engraving, and in expensive versions to create pseudo- or classic stained glass windows.

Forged input groups are very advantageous, which is durable, but require serious care and coating with anti-corrosion materials.

Wood It remains one of the most preferred materials. But the usual varieties are short-lived, especially in the contact zone with the soil, and the tropical rocks are extremely roads.

The most popular currently is an aluminum profile. The advantages of entrance groups from it include:

strength, ease and fire safety;
high corrosion resistance;
ease of processing;
high noise insulation and heat saving;
resistance to temperature drops;
durability;
multivariate decor.

TO disadvantagesthere are not very high wear resistance at constant operation, high thermal conductivity and relatively high cost.

In general, among the advantages, it is possible to note the possibility of manufacturing almost any version of the input groups in an industrial method, and on the spot - the installation only.

Installation

Installationit makes sense to consider on the example of the most popular frameworks with double-glazed windows.

This procedure is quite simple, but requires accounting a number of features when choosing a material. It must be remembered that the glass is a fragile material, so the installation of such an input group should be supported by measures to protect against hacking and hooliganism (protection, high fences, metal external blinds, etc.).

In very general The entrance group can be represented as designfrom metal profiles, which can only be the door, and may be a complex with several doors and windows or glazed spaces. Almost in all cases, installation consists of a number of stages:

drilling holes in profiles adjacent to the input;
installation of profiles in the opening and their leveling using the level;
assembly according to the instructions of the group of the group;
hitting and adjusting door sash;
filling the frame with glass panels or double-glazed windows;
sealing the gap between the building and the design of the group inhibitory profiles, foam or plaster;
final processing of construction and opening;
construction of visor and other necessary elements.

Installation operations are usually preceded bythe structure of the porch, platform, terrace or stairs, according to ordinary techniques, with the difference that they can communicate with the house as hard and have their own foundation and minimal clearance, for independent precipitation in minor limits.

Devicethe input group has a rather comprehensive and complex character that requires a separate detailed professional project and many construction skills. Even mounting frame system requires high precision To reduce wear of the rubbing surfaces and smoothness of the movement of the doors. All other works do not differ in difficulty from other construction and finishing works and require a qualitative implementation on high levelDespite the fact that the elements of the whole group can be manufactured by industrial way.

In the construction industry, the term "entrance group" appeared relatively recently. The entrance group is considered to be various designs and decorative elementswhich make up the composition, drawing up the main entrance to the house. Entry group - This is the first thing that will be able to assess the guests entering the house.

If you look at the photo, it can be understood that the entrance groups in private homes can be submitted by various options.

Main options for entrance groups

The entrance group is usually submitted by the following elements:

The entrance group should be combined in style with the architecture of the private house. The entrance door is an important element of the facade exposure. Today's market is able to offer entrance doors for every taste and prosperity. They are made from various materials and can be both metal, wooden and made of tempered glass.

The design of the entrance doors for a private house is capable of satisfying any customer requirement. You can install unpaid, single, double, sliding or combined doors. If the owner of the house wants to get a unique door to emphasize its individuality with it, then the door to order should be made.

The glazing of the input group is a win-win option. The framework of translucent walls of even the most simple and unattractive design is capable of gazing to it. For these purposes, not only glass, but also acrylic or polycarbonate can be applied.

The porch with the staircase should be different with its strength and beauty. In the photo you can see the original combination of the porch with the use of stone masonry and complementary by its forged railing with openwork pattern. A visor can be arbitrary size and close not only the porch itself, but also the stairs. It can be complemented by elements of openwork forging. If the house has more than one floor, then you can use a balcony instead of a visor, placing it over the porch.

The style of the input group is determined by the architecture of the house. A private house can be performed in a modern style, classic or ethnic. To determine the selection of the most suitable input group, you can view photos that are represented by a variety of variants of groups.

Examples of input groups in a private house

What is an entrance group

Forged entrance groups

Separate attention deserve forged input groups. With the help of forged elements you can create individual design The porch, visor or registration of the input group as a whole. Manual forging It is possible to attribute to a certain type of art that allows you to create amazing works of metal. Many workshops are carried out full cycle Production - from project development before installing finished designs.

Such a solution may be suitable for those who want to add individuality to their project and make their home unique. Entrance group using wrought metal structures may consist not only from the porch with perilles and a visorBut also include additions in the form of a bench or street lamps.

The entrance group is an integral part of the architecture of any private house. The attractiveness of the entire structure will depend on its thoughtfulness, affecting the overall impression of the design of the house. The photos presented in the article forged input groups make it clear to see all the beauty of such design.

In the form of a porch

The entrance group in a private house should not only demonstrate the hospitality of the hosts, but also differ in security, convenience and comfort for themselves in the house. In photographs you can see several options for the porks, which present the entrance groups with an extraordinary, creative, but at the same time practical and rational approach.

The porch in a private house may differ in style, size and shape. May represent an option closed porch using steps, or, on the contrary, have open view and place at one level with the Earth. In photos you can see the most successful optionswhich can be modified with your own preferences or take any idea for the construction of your home.

Porch, P. big account, represents a flat platform With the adjoining staircase. It has miscellaneous technology Construction in a private house and maybe:

Built-in.
Included in the foundation project of the house.
Having their own foundation.
Made in the form of an extension after the completion of the main construction of a private house.
Performed in the form of open steps from natural materials, for example, stone.

Staircase for the porch must be built with a certain biaswhich should not exceed the horizon of 45 degrees. Stairs, which are located above these indicators, must have a ramp and perform in the form of anxigated design. The porch must be allocated by the beauty of the design, convenience for the owners and correspond to the main architectural design of the house.

Among the priority conditions during the construction of the porch, practicality and convenience can be distinguished. By regulatory documents The depth of the step, convenient for human walking, should have a depth of three hundred millimeters, and a height is equal to one hundred and eighty millimeters. The dimensions of the sticking should be 450 millimeters. For a comfortable passage of one person, the width of the ladder should have the size of nine hundred millimeters, and for the prosperous passage of two people, these sizes should be increased to 1450 millimeters. We should not forget that in private construction, the height of fences is not subject to strict regulations.

Construction of the top pad of the porch should be given special attention. It should be below the level door threshold fifty millimeters. This is due to fire requirements. An indicator that in practice is often neglected, refers to the depth of the site, which should be from the width of the door leaf of one and a half size.

Upper podium can have a different width And, as a rule, has limitations associated with the territory of the site. The hosts, if desired, can make a full-fledged terrace throughout the perimeter of the house.

Constructive features, size and shape of the porch

Application modern technologies During the construction of private houses, they allow the owners to implement any ideas and skillfully combine the porch of almost any form with the architecture of the house. The porch may have a form of a semicircular, a rectangle, trapezoids, a polyhedron, combine curved lines with sharp or smooth transitions.

The porch in the form of a semicircle can perfectly smooth all straight lines and angles, and also wonderfully combine with straight steps. As can be seen in the photo, such a combination points to the hospitality of the owners, ensures the comfort of entering the house and looks very impressive. Material for construction can serve as stone, concrete or brick.

To give the house of rigor and graphics, you can perform a porch in the form of a square or a rectangle. Stages in the form of a trapezium able to balance the size of the houseTherefore, it is more expedient to make them extended from below and decreasing in size to the top platform.

The porch may be relative to the size of the top area:

Greasy open platform With railings, which can serve as a terrace.
Without a fence, but using a canopy, a porch can serve as a patio, where the owners will be able to meet friends in the warm season.
When using a closed or glazed porch shape, it may have a kind of veranda.
If there is no special need for the construction of the porch, then you can restrict ourselves to a small extension to protect the house from dust and dirt.

The height and size of the porch are often taken from the accounting of climatic conditions of residence and terrain. On uneven areas with a complex terrain often apply piles for constructionto save on complex land works. In sites with a limited area for construction, often the porch along the facade of the house or make a reversal design using several marches.

For narrow poles, there are often the location of stairs on the sides. The justification of such structures is the insufficiency of the place for the construction of the house. Such structures provide several people comfortable walking on the porch.

In the construction of small and low porks, where the provision of a tripartite passage is required, apply a circular location of the steps relative to the main site. The entrance group with the application for the porch of its own original idea, can revive the architecture of the main building.

For houses in Finnish style often use side extension of the porchlocated under the same roof with the house. Often the combination of such a design with a terrace or veranda. Such construction is appropriate on small land plotswhere there is no possibility for the construction of individual buildings.

Materials used in the construction of entrance groups

Working out the style of the porch for a private house, you should consider the materials that will elaborate with the design of the main house. You can use almost all materials for outdoor work, which will serve not only by the technical element of the extension, but also the decorative decoration of the house.

For construction, you can use stone, brick, concrete, wooden and wrought structures threaded. Sometimes it is possible to create an original architectural composition when used to build multiple styles and a variety of materials.

When designing an entrance group can be applied non-standard solutions and skillfully combine various materials, styles, as well as the types of the porch. Such an approach will give refinement, comfort, coziness and individuality to the main structure.

It is the opinion that the facade of the house and his porch may say a lot about the owner. No need to go inside, just look at the porch and the building itself outside to say about the taste of the owner, the ability to make a highlight to its structure. What are the species of the porch? What do you need to know to properly design it? What materials will be needed for the construction of the porch? These and many other questions you will find answers in the article. We will definitely be attached to photos that will help visually consider those options that will delight your eyes in our own yard.

The phrase "entrance groups" includes not only the porch, but also the entrance door, a visor, a staircase, a fencing. Basic requirements for the design of the porch:

Types of porch designs

When the owner proceeds to the design of the porch, he must clearly understand constructive features. In construction, it is customary to classify three types of the porch:

Varieties of the porch for a private house

Modern designers can offer huge selection The projectors of the porch, and necessarily each of them is accompanied by the photo so that the person see and appreciates the structure in real conditions.

This option is considered the easiest, cheap and affordable. The group itself includes a metal-plastic door and a visor. Here you do not need to build steps, there is no need for the construction of the porch. The main highlight of this option will be an area for landscaping. So that this entrance group looked original, it is necessary to choose color gamut The facade of the house and doors with the visor.

If the house is made of brick, then you can install the usual white metal plastic door. It is good at the same time combined the base, painted in a dark gray color. The visor can be made from polycarbonate, attaching it to the wall with wrought-iron mounts.

Entrance group with terrace

It can close the entrance from strong wind And rain, from the bright sun. As finishing materials can be used both natural and artificial materials. The main thing is that everything harmonized with each other;

Entrance group of wood

This species is built near dacha Domikov and small private houses. For its construction, you do not need to have a huge luggage of knowledge and skills, and the cost of materials will also be minimal. Professionals advise when open type The porch can make massive steps that give the building a kind of highlight. Beautifully looking massive wooden railing. Such structures will give the house old Russian is. But despite all the beauty and originality, yet builders recommend a wooden porch to cover the canopy. This will extend the service life. The canopy itself can be decorated with carved figures, balusters. Well combines a tree with wrought elements.

The terraces look from the tree perfectly. Not necessary wooden terraces Close up with glass, it is enough to build a railing and side panels. Beauty and originality wooden porch For a cottage or private house can confirm the photo.

Stone entrance group

This view is suitable for a brick massive house. But, as practice shows, the brick porch is well combined with wooden structure, and other types of material. This option has become the most fundamental and durable. The stone porch can have any shape. Stairs lay out bricks either reinforced concrete plates, or artificial stone. Posted by uniqueness, a peculiar charm can forged elements, iron decorative ornaments. To emphasize the integrity of the entrance group and the house can be massive canopy.

Elements of entrance group decoration and architectural solutions

Input group with columns. This view is suitable for houses in several floors. It is precisely the columns will be able to give the facade of the building of the building, emphasize the welfare of the owner. Such a porch is made of stone and bricks. Marble can be used, granite.
Glazed porch. It is mainly built in areas with long and cold winters to prevent direct cold air entering the inside of the room. As for the creation of the project, it is better to trust a professional, since in its functionality this porch is much superior to other species.
Input group of polycarbonate. This species can be used on cottages or houses for seasonal accommodation. Translucent polycarbonate sheets are perfectly combined with modern minimalist buildings. If you go to arrange your porch, you can add forged products for various forms.
Fabulous entrance group. If you have an extravagant imagination, you can build an input group of non-standard species, for your cottage. If your home is near the forest, then you can give it a fabulous hut. For this, you can handrails and fences of the porch, the windquarters on the windows from the branches and the roots of trees. It looks original with flowers dark and light. The covering for the input group, in such a house, should be a continuation of the roof, the whole design should look harmonious and one.

Posted by the input group, the feeling sensation is possible using a combination natural stone and natural tree.

Basic Porch Design Requirements

Before starting construction, it is necessary to draw up a project of the future porch, be sure to determine the construction plan and with required materials. Experts note that when designing a porch, you need to pay special attention to such nuances:

Create a porch: photo and video

What should the door in the input group

Doors are the center of the facade composition. No matter how cool, and the porch in a private house is the first thing that rushes into the eyes. Doors should not only be decorating the entire design, and first of all be durable, and protect the dwelling from penetration inside outsiders. Modern construction firms There are several options for the entrance door: metal-plastic with double-glazed windows and without them, aluminum sliding and swing, wooden, steel. Depending on the size of the porch, such types of doors can be used:

Swing. This is considered a classic option. The door opens a car. Mostly entrance door opens out. Today construction technologies allow you to install pendulum doorwhich will open in any direction;
Sliding. Many experts claim that it is the sliding entrance groups of a private house, which consist of panoramic glassallow you to illusively connect with nature. This species is recommended to be installed in tambourines where there is a limited space. Saving space is achieved due to the fact that the doors are shifted to the side or along the wall;

The sliding door type is represented by several species:

Foldable door. The design can either fold in the form of a book, connected alternately.
Shift. Doors shifted in one direction along the wall.
Telescopic. The principle of movement of the flaps is reminded by collecting a telescope.
Radius. This species is suitable for designs with a large space, as the doors shifted around the circle.

Exterior doors

It is worth understanding that the doors will not give the entrance group of the real personality, if they are not harmonized with a terrace, a veranda and a porch. You can give them a highlight using decoration. Glass doors input groups of private houses and cottages decorated with:

Photo printing. Using a special film or UV printer, any image is applied on the glass;
Fusing. Patterns on glass doors laid out with the help of multi-colored glass, in the subsequent made drawing baked in the furnace;
Sandblastrike. With the help of a special apparatus, the glass surface is processed and a matte surface is created for drawing;
Engraving. Mechanical or laser ways are applied on glass patterns, may be labeled or run small parts. You can give a special chic using art painting In combination with etching.

Entrance groups: Arrangement options

Choosing a certain input group for his cottage or private house, it is worth remembering that the main task is functionality, and only then beauty and originality. As a conclusion - the entrance group in the cottage, which are presented, should combine such important qualities as reliability, long-term functioning and a chic aesthetic appearance. Listening to the above recommendations, it is quite possible to make your cottage with an envy object for neighbors.

The entrance group to the house is a combination of several architectural elements that make the entrance to the dwelling more comfortable and attractive. From this element of the facade, an idea of \u200b\u200bthe owner of the house, its tastes and status begins.

Competently decorated input changes the appearance of the construction, creating a unique image. However, the aesthetic load of the function of the input groups does not end.

Make an order

Practical functions of entrance groups

Entrance group B. a private house

Entrance group in cottage

Protects the entrance from atmospheric precipitation

Prevents the penetration of cold and noise from the street

Delays dirt at the entrance

Makes entrance to the house safe

Does not allow uninvited guests to penetrate the room

Only high-quality entrance groups created from good-quality materials will cope with the aesthetic and practical functions assigned to them. Wooden input groups "Red Gorka" will emphasize your home style and make the entrance to it as comfortable and original.

Technically characteristics of entrance groups for the house "Red Gorka"

Profile: Three-layer glued bar (pine, larch, oak), cross-section of 78x78 or 108x78 mm, sash 78x78 or 108x78 mm.

Accessories: Roto NT (Germany).

Aluminum thresholds: Wesser, Greent-Q.

Double glazing: Two-chamber 38 mm.

Seal: Two schlegel circuit.

Coating: Lucky and water-based paints "Sikkens" of AKZO Nobel (Germany), "Remmers" (Germany).

Packaging: Cardboard, polyethylene film.

Our work

Entrance groups for houses and cottages "Red Gorka" is:

Long service life.The durability of the design is determined by the type of wood used: oak - 75 years old, larch - 60 years, pine - 50 years.

Only quality raw materials.All materials used in production are strict quality control.

Resistance to temperature differences and climatic sediments.Flawless performance features wooden crafts Get at the expense special impregnations and paint coating.

Effective protection from cold and street noise.Dense door presses ensures the Q-Lon Schlegel seal, retaining its properties even in -60 ° C.

For your home, the wooden entrance group will be:

Harmonious element of exterior

The main decoration of the facade

Unique raisin

Types of entrance groups for houses and cottages "Red Gorka"

The view of the input group is determined by the type of doors used.
The company "Red Gorka" offers three options that are suitable for the entrance to the private
and vacation home, as well as cottage.

Swing doors - classic designcapable of withstanding high loads.

Parallel- sliding doors (PSK-portals) - stylish solutionallowing you to fill the house with the maximum number of light.

Folding doors (FS portals) - perfect option for registration wide opening. The feature of the design is in principle of work on the type "Harmonica".

Types of glasses for the input groups "Red Gorka"

Strength and security Strained glassArmored glass

Maximum protection against heat loss Energy saving glasses

Originality and aesthetics Stained glassToned glasses (film or spraying)

We implement projects of any complexity in the agreed period

Provide professional advice

Perform all stages of service: from measurements before installation

I confirm the quality of the 3-year warranty and certificates

By contacting the company "Red Gorka", you will receive:

Compliance with all technological subtleties.

Always friendly attitude.

Post-warranty service.

The opportunity to put on production at any time.

Exquisite entrance group to the house - confirmation of your impeccable taste!

Take care of the comfort of your family now!

The entrance group is the face of the facade of the building. At first, visitors are paying attention to it. Including the success of everything construction project. It consists of a door with the framing, stairs, columns, railings.

Light and universal input groups made of metal, glass and plastic came to replace the heavy, bulky gate and doors. These changes are related to the requirements that are presented to the modern entrance to the public, industrial or residential building:

Transmitting ability. Important parameter For entry with a large passability of people. Classic swing doors It is not always possible to cope with the flow of visitors, therefore there are other constructive options.
Wear resistance. Materials and mechanisms must withstand a permanent mechanical effect, as well as temperature drops, the effects of rain, snow and wind.
Tightness. Doors must preserve the inner microclimate of the premises.
Protection from cold. Profile and windows input groups must have low thermal conductivity.
Beauty. Glass structures At the entrance is a building decoration, designed to diversify not always a bright picture of the facade.

Based on the above requirements the ideal option For an entry device to an industrial, public or residential building is a translucent entrance group from aluminum profile.

Input groups of aluminum

They help to arrange a warm and reliable entrance to any building. Aluminum entrance consists of profile, double-glazed, fittings.

Profile is a rigidity frame that is hung in glass filling. Aluminum frame wins from other materials due to the strength, ease and durability. The profile of aluminum alloy will not be nuts, you can hang heavy elements on it. It does not corrosive, does not destroy from action external environment. Middle time operation 50-80 years old.

A cold and warm profile applies for the device input groups.

Cold - consists of metal without thermal staples. It is used for facade glazing, devices of input groups in cold rooms.

Warm - consists of several cameras, between which thermal layers are installed. It is used for the device input groups in residential and public, less frequently industrial buildings.

Double glass. Filling between rigidity frame. There are single-chamber and multi-chamber double-glazed windows. Single-chamber consist of one glass. Used for the device input groups in non-heated premises.

The multi-chamber consists of several glass glued to one package. Used to fill aluminum Karcasa entrance groups of residential, public, production tasks.

Furnitura. Includes pedestrous elements, fasteners, locks and handles.

The manufacture of input groups from aluminum is associated with the use of the most modern technological and technical solutions.

Glass entrance groups

The combination of double-glazed and aluminum profile is used everywhere for the facades of the buildings of various purposes. Entrance groups of glass to private house or public building are divided by the type of doors:

Swing type doors. Consist of two canvases opening in one or two sides. Allow you to maximize the useful volume of the doorway. Used in kindergartens, schools, hospitals.
Sliding doors. There is a manual I. automatic opening. Applied to the device of vehicles in shopping and entertainment centers, as well as in the composition of continuous glazing of private houses. May be warm and cold. Sliding doors allow you to maximize the bandwidth.
Doors pendulum type. The cloth spins around its axis. Aluminum pendulum doors are installed in office buildings, shopping centers, as the second doors.
Folding doors. Applied in private housing construction for the exit device to the terrace or rear courtyard. Widespread in countries with a warm climate. We use a harsh option with a massive warm profile. Folding doors allow you to significantly save residential space.
Doors of the revolving type. The principle of work resembles a revolver drum. This is disc big diameter SO glass Wallswhich is constantly spinning along the central axis, increasing bandwidth.

The functional destination of the building imposes an imprint to appearance and technical features Doors from aluminum profile.

Entrance group of restaurant

In restaurants and points catering Mounted predominantly aluminum swing doors with one or two sash. A warm profile, two-chamber or three-chamber double-glazed windows are used. Under conditions of harsh climate, aluminum input groups consist of a tambour gateway with two, and less than three doors.

Entrance group cafe

Almost no different from the restaurant. In some establishments, where the cafe is adjacent to the trading pavilions, the doors of a sliding or revolving type are installed.

Entrance groups for a private house

For the main entrance device, aluminum sliding doors with a warm profile and a multi-chamber double-glazed window are used. Part of the tambura as external doors. Often, the door canvases are embedded in a glass entrance group. Usually, double-glazed windows are placed by a sunscreen energy saving film.

The doors of the folding and sliding type are mounted in private houses, like access to the backyard. Consist of a warm profile and multi-chamber glass. To protect against penetration, double-glazed windows are glued with an anti-vandal film, enhanced locks and loops are installed on them.

Entrance groups of modern homes or public buildings combine high-tech functionality and aesthetic appeal. The input device from the aluminum profile is a correct solution.