Each owner country house It seeks to decorate the area adjacent to it. The purchase of industrial vases from concrete or plastic modules quickly solves this problem, but is accompanied by serious costs. In order to save it, you can use step by step leadership To create such a simple product like a flower bed of a tires with your own hands: Floor clubs from wheeled tires and practical recommendations They will help to navigate in this matter.
The feasibility of making flower beds from tires with their own hands
Creating flowerbeds on the site - one of the most effective ways Remove the landscape. The original and bright design of the product will become an object of universal attention. Often, flower beds are made of primary materials, such as automotive tires. This moment is determined by the fact that the rubber from which the wheels are made are easily amenable to various types of processing. It has a flexible and elastic structure that allows you to give products the necessary form.
Using tire flower beds, you also care about ecology. Most motorists throw out their tires spent their tires where they occupy useful Square and pollute environment. If you do not have a material at hand, you can ask him for neighbors who do not need old tires.
Car tires can be painted. To improve the decorative characteristics, many owners of country sites complement their appearance by other materials, creating flower beds with a unique appearance.
Advantages and disadvantages of tires
Numerous photo of flowerbeds from the tires with their own hands, which can be accessed on the network, indicate that the main advantage of the rubber product is its originality.
There are other advantages:
- simple and understandable manufacturing technology;
- the ability to achieve interesting forms due to the characteristics of the material;
- the ability to perform painting of finished products;
- external appeal;
- low costs (subject to the presence of spent tires).
There are practically no disadvantages of this method. The disadvantage can only be considered that far from all owners of country sites consider an attractive material as a car tire. Some of them are inclined to more elegant or simple flower beds that do not require time and forces for manufacture.
Types and photos of the flower beds do it yourself
To create an original flower garden of wheeled tires, it is not required to possess special skills and knowledge. You only need to familiarize yourself with the basic information, have instructions and appropriate tools at hand.
By type of construction, the following types of flower are distinguished:
- low;
- round;
- high;
- single-tier;
- figured;
- multi-tiered;
- suspended.
The round flower bed was primarily the simplest and laconic design. It is enough to paint the tire in the color you like, fill it with the earth and plant plants.
Multi-level structures are created based on tires with different diameters. They are placed on each other (in the sequence of size decrease) and are filled with soil. On the principle of the pyramid, conventional tires of the same size can be laid. Only in this case, a certain amount of wheels is placed in the base of the structure and with each tier this amount decreases.
Flowerby suspended type Fasten to the pipe, tree branch with chains or rope, pre-breaking the bottom with some material. This type of flower garden is created according to the principle of Kashpo.
To start work, it should be declared the design and its dimensions on the basis of the available materials and the size of the site, where the flower bed will be installed. Need to take into account that on large territories It is recommended to install large and massive products. Suitable multi-tier-type flower beds or compositions from a large number of small flower beds.
Take advantage of useful tips to create your hands the flowerbed from the tires whose photo of which you liked.
Rules for creating successful flower beds:
- rubber intended for operation in winter roads is distinguished by greater fatigue and is much more convenient in work than summer. It does not require special efforts with string;
- when choosing tires, it is better to choose those that are most worn as possible. The rubber on such wheels was thinned, became soft, which simplifies processing;
- tires with a worn tread are much easier to turn out;
- on the primary stage Creation of flower beds always makes the preparation of material for work. To do this, the tire is thoroughly cleaned by traces of dirt and foreign objects;
- if cutting figured elements is assumed, you need to put the pre-markup to facilitate the cutting of the material, make the result accurate and neat. For these purposes, it is best to use markers, chalk.
How to paint the flowerbed of the tires: photo, instruction
It is not recommended to leave the flowerbed in primeval form after working on its form is completed. The product of black looks inestic. Before starting work, it is worth stock paint and materials for decorative decoration Flower garden. Think up in advance future design. Variety appearance of flower beds will allow bright colors. They can be combined.
Use:
- patterns;
- drawings;
- geometric images.
Rubber is a specific material requiring special circulation. To dyeing the product from a car tire, you can use the following types of paints:
- automotive;
- oily;
- nitrocracy;
- enamel.
To increase the adhesive properties of oil coloring composition, it is recommended to pre-process the rubber surface of the primer. This preparatory procedure will allow you to get rid of roughness and irregularities that can be on the tire. Optimal in this case will be the primer composition of GF-021. It will reduce paint consumption. To enhance the strength of the coating, you can add not to the primer a large number of The adhesive composition of PVA.
The flowerbed needs to be painted not only with external, but also with inner. Since the black edges will still be pushed through green plantings. The primer is applied to the surface of the product with a brush. The process of staining can be started only after it is completely dry.
Tire flowerbed with their own hands: photo Flowers from wheeled tires and creating technology
At first glance it may seem that worn tires of the automotive tire is not the best material for creating flower beds. The round shape of the tire itself looks quite simple and boring. But this does not mean that the design of flower beds from this material is strictly limited by its original form.
Flexible rubber allows you to raise fantasy and come up with many versions of execution that are suitable for creating a flower garden on the site. Most of these products do not even cause thoughts that old automotive tires served as material for their manufacture.
Conditionally the most popular design options can be divided into several categories:
- items (Vase, Items tea service, for example, a cup, brewing kettle);
- birds (flamingos, swans, cocks, parrots, penguins);
- flowers;
- animals (turtles, frogs, pigs);
- figure objects (kashpo and flowerbeds with original slots and curved forms).
Each type of construction has its own characteristics. Using the creation recommendations beautiful flower beds of automotive tires, you can easily fill your site with original products.
Features of the creation of flower clubs from wheel tires with their own hands: photos and tips on the manufacture of flower beds in the form of objects
Flower beds in the form of volumetric vases most often can be seen in the territory of the country sites. Such structures are easy to perform and have a spectacular appearance. To begin with, it is necessary to take care of the presence of required tools, materials and related devices:
- acute knife;
- stones or pebbles of various sizes (additional decor);
- tires;
- painting composition;
- primers;
- chalk (soap, marker) to apply markup;
- metal mesh;
- tassels.
The simplest flower bed in the form of a turtle will require the presence of two identical tires, an old rubber ball and spring. One tire is laid on the ground and remains the whole (it will be a torso), the second is cut into so that four pieces of the same size will end up. Cropped parts are fixed to the design. It will be legs. Using the spring (neck), a head is installed on the torso in the form of a ball.
The finished product is painted. Dorove required details: Eyes, Nostrils, Roth. According to this principle, you can create figures of other animals.
Making flowerbeds from a tire in the form of a vase: instruction
The technology of manufacturing this product involves turning the tire on the wrong side. That is why it is so important to pick up tires with soft and fine rubber.
The main stages of work:
The shape of petals can be completely any:
- triangular;
- rectangular;
- wavy;
- rounded;
- in the form of leaves;
- abstract, etc.
These petals will subsequently be located along the edge line of the vason.
Marking with chalk or soap is applied to the top of the tire (on the one hand). Using the cutting tool (scissors or logs), cuttings should be made by the outlined lines.
Tire turning on the wrong side will require some skill and certain efforts. To achieve the desired result, you need to flip the tire with the one-piece up, to capture the product for the edge line just made by the cuts located below, and, pressing it on the protector, carefully turn it out. Approximately half of the work performed, the tire should be flattened into the oval. After that, turn it out inside out to be even easier.
The last step will be staining the finished product in the selected color. It is better if the shade will be harmonized with a common type of plot. A monophonic color looks attractive, but a variety of colors will make the flower bed more spectacular.
Step-by-step instructions for creating and photo of a flower bed in the form of a flower vase
The easiest way to make a standing flower bed - to the previously described version of the product to fade 3-4 legs. To create them, you can use semicircular tire trimming (zone near the disk), bending pipes or fittings.
To create a more stable flower garden, you can use a tire equipped with a metal disk. Execution technology is almost the same as in the previous case: the wheel is stacked on smooth surfaceThe markup is applied in the form of petals and cuts are made to the tread itself. Both parts of the tire turn outward.
Elements are stacked by each other so that it turns out a large vase on the leg. Before planting plants, it needs to be painted. Decorative design may be the most diverse:
- staining of the product under flower (color top, green bottom);
- imitation of a concrete or metal vase (depends on the color of the paint);
- applying beautiful patterns or drawings;
- decoration with pebbles, glass, seashells and other elements.
Technology for creating a tea service from tires
Tea set in the form of a cup and a brewing kettle is quite simple. For the kettle, three tires with different diameters will be required. The largest tire is laid under the bottom. It will perform the function of the bottom. Two other tires are stacked on top of it. Moreover, the smaller of them should have to be on the middle of the structure, and already on top of it the one is stacked that more (but less lower).
For the formation of nose and handles, pipes will be required. The spout is made of waterproof with a curved shape. For the handle, a regular tube is suitable, the diameter of which is 3 cm. She needs to give the shape of the hook. Having made these elements, they should be attached to the design in the places of consolidation and outline the lines of the cuts, where they will subsequently insert and secure.
A cup is made of three tires different size. A pair of tires come from a passenger car. Also need a large tire from the truck. She will serve as a basis for the creation of a saucer. To do this, the top is cut from the product. Both edges (outside and inside the wheel) are processed so that a flat portion resembling a saucer remains. It is slightly plunged into the soil, and the tires from the passenger car are installed on top (one).
The obtained items of the tea service are filled with the soil in which flowers are planted.
Creation of flower beds with your own hands: video and recommendations for colors
Flowers, resembling animals, are partially manufactured from solid and sliced \u200b\u200btires. The flower bed in the form of a swan is considered one of the most complex variants of the manufacture of flower beds. It includes a tire turning method. But at the same time there is a complex markup.
Cutting with an electric jigsaw should be accurate and neat. To make the neck of the bird curved and fix it in this position, you should use a wire. The decor is done in such a way that the externally flower beds resembled the swan. The beak is made separately.
The following flowers will be suitable for creating compositions with combined height:
- petunia;
- marigold;
- pansies.
Georgians, phlox, plants with an unusual shape and foliage can be placed in the central part. They will attract a look, concentrate attention at the required point.
Hanging simple ways The manufacture of flower beds from old tires can be moved to more complex designs. Tires are suitable for flower beds, frogs, parrots, zebras, bears, turtles.
The problem of utilization of worn tires caresses eologists from the end of the 70s of the last century. This is especially true of our country, where there is still no sufficient number of enterprises capable of using them as a redemption. As they say, in such a situation everyone is saved as it can, so you can only welcome those craftsmen who try to free the dumps from these waste waste and, for example, make a clubs from tires with their own hands. They can be very different, from just covered in the soil of worn tires, in which flowers are planted, to complex vases in the form of swans with a bright pattern. If you are interested in this idea and want the plot to decorate beautiful from the tire to your home, how to make it yourself, you can read below.
What to use
If you have the opportunity to choose, then a complex club from tires, with your own hands made, the manufacture of which involves cutting figures, it will be better to look if we use products of foreign production, as they have a thinner and flexible tires. In addition, it makes sense to give preference to winter tires, as they are more textured and worn tires. The fact is that the shallow proof is softer, so the turning process occurs easier and does not require the application of special efforts.
"Flower"
To make the original hand to make the original simply take 4 any tires, preferably the same size. It will be necessary to remove the rubber from the metal rim and cut so that two identical half are obtained. So you need to go with three tires, and one rubber shell leave in untouched form, as it will be used as a flower heart. Then halves and the whole tire must be painted in different colors And insert at 5-6 cm in the ground, posing a flower from them having 6 row with a round middle. The composition will look more interesting if it is planted to plant the colors of one species, and the petals are different.
Klumba Pyramid
This very simple and beautiful option Flowers from tires, with their own hands made, suitable for sites or courtyards with a small area. It will take 6 tires for its implementation to be painted in bright colors and put in 3 rows, in which there will be 3, 2 and 1 tire. If the country area is quite spacious, then you can make the design more complicated by posting the flower of 5-6 tires in the lower row, on the second - out of 3 and crowned it alone. Such a pyramid will look especially impressive if you choose a plant with large sheets for the upper "vase".
Flowers from car tires do it yourself in the form of a vase
There is something more complex optionThe implementation of which will require great patience. However, the result is usually just superb.
So, to create original beds from the tires with your hands in the form of large VAZ, reminiscent of the discontinued flowers, you need:
- Put the tire on a flat surface and chalk draw the petals of the desired form throughout the circumference. In this case, the size of each petal should not exceed 12 cm.
- Cut billet. sharp knife or a logging saw on the contour printed. To facilitate this task, you can apply a little liquid soap from time to time.
- Perform longitudinal slots along the tread recesses at a distance of about 10 cm.
- Using a grinder, make several cuts along the outside and smoothly cut down the rubber with an indent of 15 cm. If everything is done correctly and the Bulgarian hits the metal to the metal, the white smoke must be released.
- Remove the tire inside out so that it turns out a peculiar flower on the leg.
- Decorate using enamel, oil or nitrocracies.
To flower bed from tires, with their own hands made, it became even more beautiful, on top of the base layer of paint, you can apply an ornament with a stencil or stick various decorative elements.
Pyramid Gorka
If you have 3 tires of different sizes or at least two and one plastic bucket with a capacity of 0.5 liters, then you can make a pyramid on the principle of a famous children's toy. To create a tire, you need to put on each other in order of decrease in the diameter, stinging every earth. From above you need to install a bucket and, fall into it and in the tires from the lower layers curly plantsSo that they hide with a slide, covering it all.
Flowerbed- "Cup"
The flower bed from tires will look original, with their own hands made in the form of a cup. Moreover, if the place allows you to install even a whole tea set on your site.
For such a craft, first of all you need to make the bottom item, which will portray the saucer. A bus will be required from the wagon, which is necessary to cut the sideline (so that the work walked is easier, it is recommended to cool the padzik cloth in the soap solution from time to time). Having finished with this work, take the R13 tire and is good, and the sliced \u200b\u200bside of the shoe knife is cut off, lubricating the blade liquid soap. After that, the tire is inside out inside out so that the protector is inside, and turned out to be a picture without the bottom. The next step is the manufacture of the upper part of the mug, for which the tire will need a slightly larger diameter, for example, from UAZ. Both sidewalls are cut off from it. At the same time, on the one hand, it should be done so that the resulting hole in size is not larger than the diameter of the "pile". In addition, from trimming the largest tires, the strip is cut for a handle.
When all the details are ready, you should start painting and assembling flower beds. For this, the "saucer" and the handle paint into one color, and parts of the mug in another. Further on the spot where the flower leaf is going to install, the slot is a piece of cellophane and lay the "saucer" on top, and it is installed in its hole first "to the pile", and then the upper part of the mug. Next, using the screws, the handle is fixed and the mug is applied to the color of the "saucer" using the stencil. Everything! Now you know how to make a flowerbed from a tire with your own hands in the form of a cup. It remains to fill her land and plant flowers.
"Piggy" and "Ladybug"
If you are the question of how to make with your own hands simpler, but so that it looks original, you can put your fantasy into the course. To do this, you can simply remove the "gum" from the rim, twist it on the wrong one and paint the appropriate way. For example, if you want a ladybug to appear on the site, you can paint the tire in red, apply black dots using a stencil and depict a face with eyes. And you can make a funny piglet, painting the tire turned into a bright pink color and adjusting the tail-spiral cut out of a plastic bottle. After the land will be covered in such a flower, and plants are planted, you need to cut your head out of a piece of rubber from another tire and paste it inside the tire circle, between the colors.
Flowerbed- "Frog"
Flowerbed from tires, with their own hands made, maybe the most of the different shape, for example, remind a frog. For such a craft, you will need:
- three used automobile tires;
- two covers from kilogram buckets from under ice cream or fused oil;
- emale PF green, yellow or red;
- self-adhesive colored paper;
- hose;
- awl;
- sponge;
- wire.
How to make a flowerbed- "frog"
The manufacturing process is very simple: tires need to be painted in green color And, if there is a desire, apply yellow rims from above. Then to install two tires to the selected place, and from above, between them, third. From the hose, also painted with green paint, it is necessary to cut two cuts with a length of about 1 m, and from another tires - 4 paws and lay two in front of the lower tires, and two between them, after attaching "hoses" to them. When the body of the frog is ready, you need to go to the design of her head. To do this, on the lids of buckets from the ice cream, it is necessary to draw eyes, and on the top tire - red paint mouth. After that, it remains easy to fall asleep the earth and plant flowers. If there is a desire, you can turn the frog into the enchanted princess, making it a crown from a plastic bottle, painted with yellow paint.
"The sun"
Many dacifics are interested in their own hands in the form of the sun. For such a craft, you will need one tire, bright yellow paint and several plastic bottles. The tire must be removed from the metal wheel and bury into the ground so that only semicircle remained above the surface.
Then, on the tire you need to make holes with a diameter equal to the size of the necklaces of plastic bottles, and, lubricating them with glue, screw into the tires. After that, the whole design needs to be painted in yellow And put flowers.
Flowerba pool for aquatic plants
Sweets and can be an excellent decoration cottage plot. However, what to do if there is no possibility to equip at least little pond or pool? In such cases, it is enough to make a "water" flower leaf from the tire. To do this, the tire must be cut off the upper part and insert it into the ground to half. Then it is necessary to put a round piece of a special waterproofing film from above, which is designed to arrange the pools, a diameter of 1 m larger than the tire diameter. Protruding over the border of the tire of the edge of the film must be wrapped outward, consolidate and lay down small round stones or broken bricks. It remains to put on the bottom of the reservoir, a small mesh basket with the ground, in which the roots of the wipes are planted.
A little fantasy, favorite paints and colors - and the old tire is no longer a garbage, but an important part of the decor or an artistic image. If you wish, with your own helms from the tires, you can change the entire appearance of the garden.
The dream make your garden beautiful and cozy leads his host from the beds to the design of flower beds and various flower beds.
Flowers are planted:
- in kashpo;
- on the flowerbed;
- in the container;
- in hanging baskets.
Simple plastic containers or porridge look pretty uninteresting and monotonous. Flowerba seems unfinished without border and border design. The creative beginning should be implemented, because the gardener wants to express his fantasies in interesting forms.
Sometimes gets up money issueAnd the owner of the garden has to make a choice between buying interesting specimens of plants for the collection, rosary, flower garden and the purchase of ready-made forms for their landing.
In this case, ideas about creating will come to the rescue. Even if there are no such materials on the site or next to it, on any tire station or one hundred employees will be happy to get rid of unnecessary and spent old tires of any size.
Old tires get softer from time to time and is pretty easy to process. Singing such flower beds look better if you turn the tire inside out. In this case, they resemble petals of colors or carved edges of the leaves. At this stage, difficulty may arise, but a fantasy or male power will help with it.
We summarize all the advantages:
- cheapness;
- availability;
- the ability to show a creative start;
- a large number of manufacturers.
And one drawback in the form of small physical efforts is unlikely to be able to translate them.
Turning the old car tire
Each garden, whether it is a country area or manor, is drawn up in one style.
The artistic preferences of the gardener will be prompted as a stylist direction to choose in the manufacture of flower beds.
Kashpo in the form of animals filled with flowers, decorate the garden in the style of country.
Multi-tiered clubs from tires, in which ampel petunia or the syrfing of the same color is planted, will become an excellent floral cloud and complement any color composition, giving it ease.
Suspended caspets made of tires filled with bacopa and caliberoa, give a highlight style of Provence.
What tires better take
Any work in the garden, especially creative, should bring pleasure. It depends on the degree of preparation for it. To create an exquisite element of the landscape design, it is necessary to understand in detail how to make a flowerbed from the tires with your own hands, choose wheels and prepare them for work.
The most soft for cutting figure parts and creating forms is the old import tires intended for use in winter time. The older tire is the easier it will cope with it.
Protectors on such a tire are almost erased. When staining, they will crumble at all, and the smooth surface will be able to determine the source of inspiration.
Methods for implementing fantasy ideas have a lot of:
- just flowerbed from the old tire;
- ladybug;
- cup with saucer;
- dog;
- donkey made of tires harvested in a trolley with flower-bus;
- multi-level flower bed from tires of different diameters.
Preparatory process
Before you make such a flower with your own hands, you need to go through several stages. The role of a visual manual is best plays a similar sculptural composition of neighbors. But!
Each gardener dreams of creating your garden. To do this, it makes sense to watch the video about the creation of flower beds from old tires, and make a correction for the individual taste and garden style.
There are several options for the flower beds, which are preferably watching the start of work:
- just flowerbed from the tire without turning inside out and any decorative experiments;
- flowerbed with a removed top and decorative decoration top;
- complex design with twisted tire and beautifully cropped edges;
- a very complex design for which it is necessary to dissolve the tire to narrow strips.
The artistic design of the gardener is already found in the Word, is drawn the approximate plan of the masterpiece. The next stage is to prepare for the execution of desires.
Successful incarnation is guaranteed if available is available:
- Old car tire.
- A sharp knife.
- Gloves.
- Paints.
- A wish.
There are other options for this formula. Instead, a knife can be used by an electric bike. This tool will facilitate the cutting pattern and will help perform more intricate curls that make a knife quite difficult.
To all listed terms, you can add electrical grinding machine. With its help, the old tire will acquire a new kind, irregularities and scuffs will disappear.
Acquired tires must be laundered from dirt, dust and stones stuck in treads. It is necessary for better applying paint and decorative elements For the future work of landscape art.
In some photos, showing how to make a flower leaf of tires, sometimes the tire used is not cleaned from dirt and dust. With such a material it is unpleasant to work.
Deciding with the appearance of the future masterpiece, it is applied to the clean surface with a chalk drawing of future colors or petals that need to be cut. Clear marking will further get rid of flaws, and it will work much easier.
About how to make a flowerbed from the tires with their own hands and fill it beautiful plantsYou need to think long snow evenings. It was in winter that she was seen on the seedlings of Petunia and Viola. Flox Drummond on seedlings need to be sowed in March. Having landed it in May in the ground, all summer you can admire the blooming oasis.
For the design of such a flower garden, almost any plants will fit. General rules Flowers are suitable for a rubber miracle:
- the composition should be attractive from any point of review;
- more high plants plant in the background or in the case of round flowerumba in the middle;
- in the legs of a high and beautiful, but a delicate flower must be planted soil, which disguise the ugly naked stem;
- the number of species must correspond to the size of flower beds;
- a small flower garden is enough three different plants;
- harmonious color combinations plants of one species look more interesting than the mixture of different plants different colors.
For large flower beds, you can pick up even a coniferous set of dwarf molds of juniper and ate.
Sale on the Klumba
After all the preparatory and scenery works in the flower, plants are planted. For landing, a mixture of fertile land, sand and humidiation in proportion 2: 1: 2 is prepared. At the bottom of the flowerbed, if it is, drainage is poured with a layer of about 5 cm.
If the flowerbed falls directly to the ground, then the drainage is not needed. In this case, the excess liquid will be absorbed into the ground.
Little flower bed from the tire requires a more attentive approach. A small volume of land is easier to pick up moisture and part next to it. Plants suffer from such drops of moisture. This can be avoided if you add vermiculite to the flower beds.
Create wonders for your garden!
Most dacniki seeks to issue a plot so that it looks stylish, modern and tidy. However, not everyone can afford to allocate enough funds for the purchase of finishing materials. An excellent access will be the use of automotive tires as a design of flower. Products that have served your time have a chance to live a second life.
Having old tires, you can make a variety of options for flower beds and flower beds for a garden or dachaAutomotive tires allow you to create flower beds for giving a variety of shapes and colors. Such compositions near the house will serve as an decoration of the site as well good way Dispose of old tires. The only condition for successful work With them is the presence of a set of tools and utility materials. So, you will need:
- old auto strokes;
- roulette, line (metallic);
- marker;
- lobzik, Bulgarian, hacksaw;
- primer;
- paint for outdoor work;
- mesh (metallic);
- decor: stones, wooden elements, shells, multicolored glasses, etc.
Brightly colorful tire - an easy way to organize a flower bed Choosing auto stakes
Despite the fact that in any case the wheeled tires for the design of the flower are used only those that served their time, with some of them work easier, with others - no. In connection with this, choose better:
- those that are pretty worn - they are softer, if necessary, it is easier to turn it inside out;
- for the same reason, it is best to use imported, not domestic products;
- if you can choose between summer and winter tires - it is better to take the last.
Before starting the tire, you need to wash the dirt to do not make it difficult to work. Regardless of the softness of rubber and wear of the tires, cut them more convenient to the grinder or electric bison. If there is no such tool, you can use a knife. Previously, it needs to be well sharpened and from time to time dip in soap mortar.
The best tool for cutting a tire is an electrolovik Rules coloring tires
After the final improvement of the flower beds and the design of it with tires, they will certainly be painted. This procedure will allow you to create a picture, saturated with color and give the flower bed, well-groomed look.
In order for the paint well to bed and remained bright for a long time, it is desirable to handle a layer of primer before staining the tire. You can start to start only after the primer finally gets up. You should not neglect this procedure, because after it the paint will not be covered by cracks, bubble and fall behind the rubber surface.
The choice of paint is quite wide: you can choose any weatherproof coatings. Great nitroemali, oil, automobile paints. Very popular acrylic enamel - It does not smell, it can be diluted with water. In addition, this paint is on sale in the form of a spray, so it is convenient to apply it. In addition, this method of staining is rather economical - so much material is consumed as necessary.
Some dackets paint the border from the tires only on the outside, believing that the inner part will not be visible. This is a mistake, since individual unpainted parts of the tires will certainly be noticeable at a certain angle and the appearance of flower beds elementarily spoil.
The most successful and simple tire beds
Simple borders of tires
If there are no time and special skills for registration of flower beds, it is worth trying to create a pair of simple compositions. The easiest option of the wheeled flower beds is separate flower beds, inside which sand with crushed sand, earth, and planted flowering plants. A more complicated option is a tire with the bottom "legs", which allow you to install a portable flower leaf anywhere in your yard. Fucking legs to flowerbed from the old wheel should be reliably so that the whole design is not collapsed at the most unexpected moment.
The following type of simplified flower beds are several tires installed on each other in a certain order. Look good compositions in which tires painted in different colors, stand "chess", forming a kind of wall. Such a flower structure can be used as a separator, which will allow zoning the garden.
Having at the disposal of the tires from the wheels of different diameters, you can build a pyramid near them near the house. In each "step" of the composition you can land curly plants, which over time will turn the pyramid into the garden decoration in the leaves and flowers. It looks implicitly a pyramid that constitutes which painted in different paints.
Tires can be stacked any in a convenient waybut it is important to make a bottom in the wheel, otherwise the Earth is simply full Chamomile flower bed
Such a flower bed will suit those owners of private houses, who has a rather spacious plot. There are only 4 old tires and paints of different colors. One tire should be placed in the composition of the composition, and the three remaining - cut in half so that the crescents are. Six semi-windows need to be installed around the continued tire so that the flower is turned out.
Pre-painted tires must be inserted into the ground to a depth of about 5 centimeters. Then fill them with drainage and soil, plant plants. It is recommended to plant the flowers of the same color in the center of the chamomile, and the semicircle filled with plants with petals of contrasting shades.
Bunk flowerbed - chamomile from tires Suspended flowerbed
Our master class on step by step making Kashpo flower beds will help cope with the task even a newcomer. First you need to find on the plot strong tree or a canopy that can keep the structure filled with land. The tire from the wheel must be suspended on chains or strong rope, having previously done in it holes. The bottom of such a chestboard can be drowning on plywood, or fasten the pot with a flower in the tire.
Tire figures can serve not only as pots, but also as independent decoration Garden Suspended flower bed can be made in the form of a cartoon or animal character. For example, you can cut the parrot from the tire, the dolphin, then the caspets hangs vertically. If it is decided to make a bird, the beak is cut separately from wooden board. The tire is cut according to the template, the parts are fastened by the stapler, nails. Draw your eyes, paint the tail, feathers in bright shades. To cover the rubber it was easier, the tire can be heated under the sunny rays for two hours. Before attaching porridge to a branch or roof, it should be painted. Various options Suspended figures can be assessed by photo.
Swan
Couple swans made of tires A noticeable and elegant swan figure on a flower area produces a pleasant impression, like children. Particularly stylish looks several figures of noble birds. Flowerbed "Swan" is easy to produce with your own hands, you will need only good knife, template and our instruction for beginners:
- First you need to apply the line on the bus, for which you want to cut.
- Then cut your head, wings. Remove the product inside out.
- The neck will have to strengthen the wire that will help rubber to keep the shape.
- Bird covered with white paint, isolated beak, eyes.
Approximate markup for the manufacture of swan Cheerful turtle
For the manufacture of the turtle, two tires will be required. One of them needs to be cut - to separate the round side parts with a knife, only the protector will be required. It must be cut on 4 the same sideways - these are the legs of the turtle. If there is a desire, you can make the edges of the paws to label to designate your fingers. In the second tire, 4 holes on the sides are done in which the paws are inserted, they must be fixed with wire. The tail also needs to be made of rubber, and neck - from corrugated pipe, fasten these parts on the torso. The head is made of tightly crumpled newspaper paper, fix on the neck. Painting a turtle, you can dress it into a suitable hat. Paper must be reliably covered with several layers of paint, guaranteeing moisture protection.
Flower garden "Turtle" will be excellent decoration Garden To create a frog, you need to take three whole tires, you will need additionally trimming tires and unnecessary hose. Two tires put next to each other, the third - to the center between them, it will depict the head of the frog. From trimming rubber you need to make paws and attach them to pieces of hose. Hands and legs are fixed with wire to "body". Next, the entire composition can be simply covered with green paint. You can fantasize and go further - make a frog eye, mouth and even attach the crown.
You can plan such a frog near the pond, there it will look most effectively Cup with coffee
This composition is ideal for small dachaIt turns out of two tires from the wheels of different sizes. First you need to put on the Earth the one that is less, on it - the one that has a larger diameter. The top tire can be slightly expanding the area under the planting of plants, cutting off rubber from the inner ring. From these rubber trimming, you can build a handle, securing it with the wire. Cup is preferably painted bright colors.
Cup of the tire can be painted differently Vase with Flowers
The flower bed is very impressive, imitating a vase in which flowers are worth. If you take a tire with a disk - you can make a vase on the leg, if without - the vase is simpler. The edge of the vase can be cut according to your own desire - to make gear, wave-like or cut in the form of fringe. In order to arrange the edge of the vase, you need to draw the desired pattern on rubber, cut out the contour with a jigsaw or a knife, and then turn the tire inside out. If we have chosen the disk option, the circumcision part of the tire remains on the basis of the structure.
After this procedure, a pretty pretty vase, which can be painted. Such vases make sense to decorate: it is easy to apply a drawing on a smooth surface, glue the decor of stones, whiskers.
Beautiful structures from several vases of different sizes are obtained. One option assumes the installation of vases to each other, from more to a smaller, by type of pyramid. It turns out original flowerbedwhich saves the plot area.
Despite simple design Vase, this decoration can be made original thanks to a bright unique color. General principles of plant landing
After making the foundation of the flower beds, it is useful to fill with sand and rubble about 1/3 of the depth. This filler will serve as a drainage that will retain the roots of the colors from the convergence. The soil falls asleep from above, and only then plants are planted.
In simple flower beds, curly plants are usually planted or those that bloom thick "cap". If there is a desire to get a multi-level blooming ensemble, it is worth landing on flower beds, velvets, pansies. In the middle of the flower beds, it is desirable to plant plants with high colors: Iris, dahlias, phlox.
Bright I. unusual flowerbedsDecorated with tires are doomed to become a stylish feature of any garden. Near such a flower garden, it is nice to relax the summer evening, chat with friends and households. Photo gallery of the most unusual and simple in the device, the Klumba will inspire on the creation of its own composition. Try and you make one of them with your own hands to appreciate the entire attractiveness of the budget design.
A few decades ago, the flower beds rarely could be found on panstones. Disposal of wheel tires an unusual way It was carried out except in the villages distant from large cities and was exceptionally practical. The flower leaf from the wheel was not taken to decorate or somehow modify chief Materialwho served a flower bed fence.
Today everything has changed. Fashion for man-made interesting details in the decor touched not only the interiors of apartments, but also in the household sites. Flight of the fantasy of modern household design masters is huge. This allows you to create unique compositions that are not only useful in the country, but also, giving it a unique style. Such original items can be found almost every day. Among them and the flower beds from the tires, with their own hands that are quite simple.
Almost every second person in the country has its own car. In some families there are several four-wheeled vehicles. Each machine requires periodic shift shift. We are not only about seasonal types of wheels. Modern roads and weather conditions contribute to the fact that rubber, which is used to produce tires, quickly comes in disrepair.
The culture of disposal of such waste in our country is developed very weakly. Therefore, it is often possible to see the picture when on the outskirts settlements And whole mountains grow from wheelbases from wheeled tires.
Tire flower bed painted in the style of nesting Once again, how much does nature harm such garbage, is not required. Even schoolchildren know that the half-life of rubber is calculated by hundreds of years. Therefore, it is better to take an unnecessary wheel to the reception point, which can be found in the nearest car service, or offer a familiar dacroom, who knows how to make a flowerbed from the tire with his own hands.
Benefits of tires as material for decor
The tireless seekers of the most original way to decorate the household plot are increasingly stopping their choice on such an interesting element of the decor, like a flower bed. The most passionate masters willingly share their creations by demonstrating numerous photos on which floral design the territory created with the help of clubs from the tires with their own hands, looks unusual, beautifully and harmoniously combined with general design cottages.
The choice of such a material for the flower bed decor is explained by several factors:
- Rubber can last long enough.
- Material is available, it can be obtained completely free.
- Tires are relatively easy to handle, capable of taking a variety of forms, can be painted in different colors.
- A flower garden made of automotive tires allows you to change the design if necessary, because its elements are easy to replace.
- The clubs from tires do not require special skills and the use of complex tools for its manufacture.
All these obvious advantages make many dacms decorate their private land tenure so affordable, cheap and in the original way.
Types of flower bed fencing
It seems incredible, but ordinary coarse rubber wheels shot from the car provide a wide field for creativity by a landscape design specialist. This material allows you to create compositions that differ in the variety of shapes and structures.
The most famous option, how to make a flowerbed from a tire, simple and does not require any additional funds. It is enough to take a tire, paint the right color, fall asleep the earth and plant decorative plants in the center of the improvised flower garden. Such round low single-tier flower beds are suitable for sections of a small area.
In the large area it is better to create massive structures. Tires of different magnitudes allow multi-level compositions that become a bright accent in any garden. Such a flower bed can be narrow, but high. In this case, the tires are laid out one to another, from greater to the smaller, creating a bizarre tower, the top of which decorate bright flowers.
There is another way to create a multi-tier flower garden. Tires can be chosen the same diameter, but put them in a checker order, gradually reducing the amount of elements used from the bottom up. Each tire in this case will be a miniature flowerumba that will be part of Blooming pyramid.
Wheel flowerbeds can have a different form. Most often you can find rubber vases, as well as bizarre figures cut from tires. Animals and birds, fabulous characters, flowers, household subjects - All this can be the idea of \u200b\u200bdecor embodied in the ordinary car wheel.
Another unusual method of creating decorative elements for the garden - suspended structures From tires. They resemble caspo and give the whole site a special charm. To create such a flower bags, it is sufficient to close the bottom of the tire with rebuilding means so that the ground is not poured through a wide hole, then you need to suspend the finished product with an iron chain or a cable to the support. It can be a wall of the house, tree or special metal carcass. After that B. finished flower garden Earth is poured, and plants are planted.
A variety of compositions that can be created based on rubber tires open a large scope for creativity and make this material Very sought-after in the household plots.
How to choose and prepare tires for the manufacture of flower beds?
Virtually any types of tires are suitable for creating separate decor elements in the country. However, there are several secrets that can significantly facilitate the work with these products:
- Winter tires are much better to handle, it is more plastic. From this type of tires make it easier to make curly compositions.
- To create flower beds from tires, it is better to choose the most worn wheels, they are easily cut. A bus with an erased tread is easier to turn inside out, if necessary.
- Rubber for domestic automotive wheels is gross and thick. It is harder to work with it. If you can choose, you should give preference to imported types of tires. They are more plastic and allow you to make beautiful compositions with less cost. physical strength and time.
Before starting, the materials need to be washed from dirt and sand. Then you need to mark the marking of the future flow of the flower garden. This is done by bright markers, chalk or ordinary soap. Preliminary drawing greatly facilitates the work and gives a guarantee that separate elements will be the same in shape and size.
After the product is ready, you need to paint it. It is not enough to apply a color composition only on the outer surface of the future flower beds, as some internal areas can also be visible. Therefore, the tire must be painted completely. The color inscribed in the overall style of the site is determined in advance.
Several types of paints will be suitable for working with rubber: oily, enamel, automotive. If the flowerbed is decided to make a monophonic, you can use the aerosol. This method is very convenient, paint falls smoothly, giving the surface saturated and bright shade. Patterns and ornaments can also be created by this method using special stencils.
To avoid small irregularities and extend the life of the drawings, before starting painting on the tire you should apply thin layer primers. Sometimes PVA glue is added to it, which increases the durability of the pattern.
How are flowerbeds from automotive tires create?
To work with tires will be required minimum set Tools:
- acute knife or electric logsik;
- marker, chalk or soap for applying the markup, on which the figure will be cut;
- wire of various thickness for connecting various decorative elements;
- paints and brushes;
- gloves.
The creation of an ordinary round single-tier flower beds does not require special time and strength. But if it is decided to make a vase or an original rubber figure, you will have to work a little bit.
Often you can see the flower beds in the form of a tea service or a separate circuit. To create them is enough one automotive tire with a disc. The top of the tire is cut across the entire width, the lower part is the diameter of the disk with a small indent. Both parts obtained are turned inside out.
The smaller element serves as a stand, it is installed on it most of Products in the form of a bowl. On the side of it is attached a handle from the wire or other girlfriend. It remains only to pour the land and put the seeds of perennial decorative plants. Such a flowerbed in the form of a tea or coffee cup will decorate any site.
This method can make an original pot or beautiful vase From the wheel. From the tire inside out, the tires make a large number of colors options, cutting the edges of the product in the form of sheets of various shapes. To create such jewelry on the plot, tires, paints and electric jigsaw are needed. Curl clubs can be made both single-tier and multistage, depending on the overall idea of \u200b\u200blandscape design.
Simple ideas for animals of tires
The most popular details for the design of the household plot have recently become the figures of animals, birds and representatives of the underwater world, made of car wheels. The properties of rubber allow you to create quite realistic works that will not only decorate the territory, but also will serve flower beds or peculiar boxes for seedlings.
SAME simple options Living beings made of tires are considered tortoise and spider. Their creation does not require difficult work with source Material. Enough cut from one tire the right amount legs and attach them to another whole wheel. The head of the turtle or spider can be made from the old rubber ball, then draw eyes, nose and mouth on it.
Simply simply made schematic images of fabulous characters. Often in areas you can meet Masha and the Bear from the Modern Modern Cartoon. Technology manufacturing such clubs is simple. The only difficulty is to securely secure the tires of different magnitudes that should stand alone on the other, denoting the body and the head of the hero of the fairy tale.
The ears and paws of the bear can be made from the remains of the tires used in another product. On the top wheel should draw the face of the animal, and in the central, which serves as a torso, can land flowers.
The most complex, but the favorite figures in each garden are swans.
Their manufacture requires the applied markup on the car wheel. The result of painstaking work will depend on its accuracy. The figure of a noble bird is cut on the sketch made in advance, and then the tire turns out in such a way that the wings, torso and elegantly curved neck become clearly visible. To maintain it, the wire is used in this position. The beaks of birds are made of rubber trimming separately and attached to the product at the end of work.
Much easier to do vertical Klumba in the form of dolphin. For this, an incision is made on the side of the tire. On the one hand, he is sharpened so that he can be reminded of the nose of this amazing marine mammal, on the other - the tail is cut out. In the opposite part of the wheel, the fin from the oblong piece of medium-sized rubber must be attached. Complete the image of the appropriate color tire. Such a flowerbed can stand on Earth or be suspended with a special framework, reminding Dolphin, who has just emerged from the sea depths.
Household belongings from car wheels in the design of cottages
The fantasy of Dachnikov does not know the boundaries, so there can be a flower garden in the household plots in almost the form of any familiar item made from tires. An interesting option is a clock. Round form Tires allows you to create all kinds of models of such devices. The most popular are flowerbeds in the form of alarm clocks or wall wrappers With battle.
In both cases, the flowers are planted into the tire turned over on the edge. Only in the first - the wheel stands on Earth, and in the second - it hangs on the wall of the house or other structure, and sometimes strengthened on the tree branch. The clock arrows are performed from the wire, the dial is applied to the paint. Additional elements can be made from any submitted means: from plastic bottles, to wooden bars.
Flowers in the form of round mirrors, vintage phones and even tables and chairs - all this can be made of tires with their own hands. Such an occupation allows not only beautiful, saving on expensive materialsBut also discover new talents, including in landscape design.