Recently, concrete has become a popular and fashionable addition to the interior. As a decor element, he entered the design with the Loft style in the 50s of the last century. To date, it is possible to make tables, dishes, chairs, facades of furniture, sinks and more from concrete. In this article we will tell you how to make a table lamp of concrete with your own hands.
What is concrete?
Concrete is an environmentally friendly product that can be recycled and reused. Concrete preparation recipe is simple enough. All you need is cement, crushed stone, sand and water. The exact ratio of all components of the solution is very important, since the strength of future products depends on this. The main component of the concrete mix is \u200b\u200bcement. When choosing its brand, it is necessary to determine the level of load and the impact of external destructive factors.
Photo: Better lamp do it yourself
Pay attention to the water that you will be added to the concrete mix. If there are components in its composition, violating the structure of concrete, it is better to refuse it. Perfectly suitable river or lake water. Speaking about the ratio of proportions, they can be viewed on the reverse side of the packaging. Remember that this ratio is quite conditional, so an unexpected result may turn out without accurate calculus.
Concrete lamps in the style of loft do it yourself at home
To create a concrete lamp with your own hands at home, it is best to use a decorative concrete. This concrete includes natural components, so it is safe for health. In addition, decorative concrete allows you to imitate various coatings: wood, stone, decorative tile, brick and much more.
No matter what concrete you use, it is recommended to sift it before mixing. It is important to use a construction mask that protects the respiratory tract from harmful dust.
What is needed for the manufacture of Loft lamp with their own hands?
Concrete is perfect for the embodiment of creative ideas. Despite the coldness of the material, such products bring comfort, heat and complement any interior style. Also concrete can be combined with other materials. In the manufacture of a concrete lamp you can give any color using special dyes for concrete.
The main advantage of concrete is naturalness and environmental friendliness. It can be easily made independently without using any special materials, tools and accessories.
How to make a desk lamp with your own hands? You will need:
- durable cement-sand mix;
- drill;
- cord;
- cartridge for the lamp;
- thread tube;
- two plastic bottles of different sizes;
- self-tapping screws.
The first thing to do is to prepare bottles. To do this, cut the bottom and drill holes in the caps of the bottles. The size of the opening should be so that you can insert a thread tube. Then insert the tube into the resulting holes and fix its position using nuts. Get the resulting design on the bottle. Use screws to stabilize bottles. In this way, a form for a luminaire of concrete is prepared.
Now you can start mixing concrete. The main thing is not to overdo it with water. The mixture should be like a dough for cookies. Mix it thoroughly so that each grain of the mixture is wet. Remember that all concrete work should be done in gloves, as concrete is very dry skin, and concrete dust is not output from the lungs.
The resulting concrete lay out the form. Use a large spoon for filling the shape. Shake and squeeze a bottle slightly after each spoon to make sure that the mixture is distributed evenly. At the end, shocked well. This will help remove extra bubbles.
Do not forget to immediately wash the dishes in which you missed the concrete. Otherwise, it will quickly grab, and it will be extremely difficult to remove it.
After a couple of days, as soon as the concrete hardens, you can cut the plastic bottles with a knife and remove the screws. Since concrete will have a rude shape, its surface is better to pass the sandpaper with graininess in 120.
The last step is to attach the cord through the metal tube to the cartridge and switch. Make sure that the lamp is well fixed and fasteners will be able to withstand the considerable weight of concrete.
Ordinary concrete, which has an unsightly gray color, is not particularly beauty. Therefore, it is recommended to use a decorative concrete - a material that combines the low cost of components, ease of manufacture, aesthetic appearance and increased strength.
Concrete color
Concrete design optional should be gray and dim. Thanks to modern technologies, mineral pigments and metal oxides, you can give products from a concrete of any shade. Dyes are distinguished by durability and will not lose the tone during operation.
Concrete color can be changed by various methods. You can apply a layer of paint to the ready-made product or make coloring additives at the mixing stage of the components.
Board lamp loft do it yourself
You can also make a concrete lamp using packaging from under milk or juice. The principle of manufacture is still the same: pour the shape of concrete and leave a place for the cartridge. After a couple of days, remove the packaging and get a gorgeous decoration for your home.
Concrete lamps are creative, fashionable and durable. What is wondering if you already have cement, such a man-made product will cost you much cheaper than the purchase lamp. Do not be afraid to dream, fantasize and incarnate your ideas!
Among the homemade craftsmen, the most popular consumables is concrete, from which you can make a variety of a variety of interior items, for example, a decorative lighting device. This building material is quite convenient in use, while inexpensive. Luminaires made of concrete are quite heavy, but it does not affect their functionality. Such decorative products are perfectly suitable for any design solutions when designing the interior of the premises.
With the help of a concrete solution, designers create interior items of a wide variety of forms, paint and decorated with additional accessories, give the product shades of gold, silver, copper and others.
It is important to note! Concrete illuminators of handmade experienced designers are quite expensive. Therefore, not everyone can afford to decorate their home with such an exclusive interior item.
In order to save your home budget, you can independently make such a lighting item.
In this article:
Concrete illuminator with their own hands using the package
Before you begin to make a cement-building lighting device, it is worth pre-prepared for this event - to collect all the necessary consumables and tools.
For the manufacture of a concrete lamp, the following materials will be needed:
- Milk cardboard package (the more the illuminator is needed, the larger the volume there must be a package).
- Plastic bottle for placing light source (light bulbs).
- Dry concrete mix.
Step-by-step instruction of the manufacture of the lighting device
Step 1
It is necessary to free up a package from under milk and trim its bending edges.
Step 2.
Further, a plastic bottle is inserted into the box and through the through hole will be drilled. To conveniently do it, it is recommended to pre-with a nail or a knife in these places to do small holes.
Step 3.
Insert a bolt and secure it to secure it.
Important! Concrete lamps must have a fairly sealed case. He should not pass moisture. Therefore, the plots of pillars of the package with the bolt are necessarily embarrassed by the sealant.
Step 4.
Preparation of cement mixture in accordance with the instructions from the material manufacturer. In this case, the main thing is not to add extra water. The finished solution should resemble the dough, kneaded for cookies. At the same time, the mixture should be thoroughly mixed so that there was not a single dry grain.
Step 5.
The free space between the bottle and the package is clogged with a concrete mixture (it is definitely well pressed - there should be no hollow plots). To get rid of the bubbles formed with air, the workpiece must be carefully shaking.
Important! Immediately wash the container in which the cement mixture was preparing, otherwise, when it grabbies, it will be quite difficult to remove it.
Step 6.
We need a product to give time to dry - the concrete must take good, that is, the whole moisture should come out of it. To do this, you may need about two days. After that, the box from the milk is removed, the bolt is twisted.
Step 7.
In the obtained billet from concrete for the illuminator, you need to drill holes of one or different diameters.
Step 8.
The light is placed inside the housing, the wiring is made, the connection with the switch is made.
A unique lighting device from concrete is ready for operation!
Concrete illuminator with their own hands using plastic bottles
No less unique are lamps from concrete, made on the basis of two bottles of plastic of different volumes.
Consumables
- Two plastic bottles of different sizes.
- Light source.
- Cartridge with a cord.
- Cement mix.
Tool
- Electrock with drills.
- Self-tapping screws.
- A sharp knife.
- Thread tube.
Instructions for the manufacture of a decorative lamp
Step 1
Cuts the bottom of both bottles, a hole is drilled under the thread tube. On both sides on the tapping screw and the nuts, a bulb cartridge is fixed.
Step 2.
The cement-sand solution is mixed, they are filled with the base of the product.
Step 3.
After complete drying of the concrete plastic is removed with a knife along with self-draws. With the help of sandpaper on the obtained concrete blank, all irregularities are removed.
Step 4.
Bulb connection using an electrical cord with a switch.
A unique illuminator is ready! Such luminaires made of concrete made by their own hands will help to embellish any room!
Designers increasingly began to use concrete as a material for creating lamps and chandeliers. Despite the heavy weight and coldness, such concrete products are suitable for any interior. To do this, it is enough to give cement suitable shape, elegantly arrange it, paint in gold, silver or copper. If there are some skills and knowledge, create lamps from cement with your own hands. This will require minimum of materials and time. Below is several remarkable ways.
Lighting device from cement using a package
To create an original lamp, you will need:
- milk box to create formwork;
- plastic bottle for connecting the light bulb;
- dry mixture of cement to create a suitable form.
The size of the cardboard box does not have a fundamental value. It all depends on what value there should be a lamp. The main thing is that the package is waterproof, since the concrete is expanding the strength characteristics from excessive moisture. Bending edges of the box need to trim and put a plastic bottle into it. The design should be secured by bolts that are taped in the previously done nail or hole screwdriver. To preserve the waterproof package, the connection location should be lubricated with a sealant. This simple way is preparing a form for filling with concrete.
Dry the mixture should be diluted with water according to the instructions on the package in which it is sold. It is important not to pour excess water. The fill thickness should be similar to the cookie test. It is recommended to add a borption to the water to commemorate each particle of cement. You need to mix the finished mixture twice. When the desired consistency is achieved, the prepared form is filled. In the process of laying the concrete, it is important to suggest it well in order not to form emptiness. At the end, the future lamp should be thicker. These actions will allow remove residual air.
Used utensils, the tool immediately must be cleaned and thoroughly washed from concrete. Otherwise, everyone will have to be thrown when the mixture hardens. The finished shape is left for two days, as the concrete needs to be seized. Then the package is removed and the bolt is unscrewed. So that concrete lamps look original, and the light was more scattered, you can drill several holes in them. In the prepared shape of a plastic bottle, a cartridge with a light bulb is inserted, the wires are connected to the switch, and the product itself is suspended under the ceiling or wall.
Lamp using a bottle (suspended)
Creating a concrete lamp using a bottle. Others, no less interesting, are suspended concrete lighting devices. Products are easily made with their own hands. This will require a durable cement-sand mixture with a stone or gravel as a filler, a small amount of water, a rosette, cord, a switch, a wood screw, two plastic bottles of different sizes, a lamp cartridge, auxiliary tool in the form of a knife, drill, tube with Thread.
At the first stage, bottles are prepared. They are cut from the bottom, the holes for the handlebar tube are drilled. The cartridge is fixed with nuts and screws on both sides. In this way, a form for a luminaire of concrete is prepared. After that, you can begin mixing the cement-sand mixture. When the mixture is ready, it is necessary to fill the shape with a spoon, slightly squeezing from the edges. This is done in order to release unnecessary air and evenly distribute the mixture.
After hardening the concrete plastic is cut off with a knife, and the screws are removed. Since concrete will have a rude shape, it is recommended to inhibit its surface with sandpaper with a value of grain 120. At the last stage, the cord is connected through the metal tube to the cartridge and to the switch. At the end it is important to test the attachments well so that they can withstand the considerable weight of concrete. In this way, concrete lamps for the ceiling are manufactured.
Concrete lighting devices for the garden look very well. They perform not only the main purpose, but the space is perfectly decorated. They are quite simple can be made with their own hands, it suffices to follow the instructions below.
At the first stage, it is necessary to make a formwork from a plywood sheet with a thickness of 1.2 cm. It is important to design the form so that at the end it was easy to disassemble. Composite parts of the form are recommended to operate with varnish. This will help further separate it from the hardened concrete without damage. If you repeatedly open the lacquer formwork, ready-made concrete lights will get the corresponding flickering shine.
At the second stage it is important to carefully consider the way of conducting the wiring. Two options are offered:
- Use a corrugated pipe from plastic as an internal formwork.
- Creating a shape for a wire from foam pieces.
The second method is more acceptable, as the weight of the lantern decreases and cement saves. You can connect the foam with each other with a special glue. After pouring the concrete, the material is easily separated. If pieces remain in hard-to-reach places, there is always the opportunity to use acetone. As a solvent, he easily corps foam plastic.
Formwork for the lamp from the box from under milk. Internal formwork is created at the third stage. For its manufacture uses plywood or cardboard. It is important that the wall thickness is more than 2.5 cm. It is recommended to use a trapeze as a form. Such a formwork is easier to remove, especially if you pre-process the walls of the oil. In the opening, the grooves made of foam for wire are laid.
The cement mixture can be prepared from the finished dry mixture, but self-preparation is allowed. For the second method, it is recommended to use the M500 cement in the Sand ratio as 1: 3. As an additive applies gravel or granite crumb. One part of such a filler is sufficient. Water should be added until the mixture is not too dry, and not too wet, with the consistency of the dough on cookies. It will be the fourth stage.
On the fifth stage, the formwork is filled with a ready-made mixture. To do this, first the cement is stacked in hard-to-reach places so that the edges of the lamp were smooth and smooth. Then the rest of the formwork is filled. To do this, it is recommended to use vibration, with which the mixture is more densely in the form.
So that water does not come out of the concrete, and he gained the fortress, after filling and the tamping it is necessary to cover it with a polyethylene film. In such a form, the future lamp is left at a minimum of three days. However, it is recommended to withstand more time so that cement is enough. After the expiration time, the formwork is removed, the finished surface is grouped and the light bulb is connected.
Do you like unusual interior items? Looking for a lamp that will suit the modern loft style or minimalism? This master class will help find a solution. Just two hours of time need to make the original suspension lamp from ... concrete.
Main materials
1. Cement and sand or finished cement mixture of high strength
Council. If you wish, you can use two or more mixtures of different colors to diversify the design of the lamp. You can also use special colored dyes for concrete.
2. Wire with switch or without
Council. It is worth paying attention to quality, do not forget that the cord must withstand the weight of the concrete lampshar. In order to be confident in reliability, you can additionally use a metal chain for hanging.
4. Tube with carvings and nuts to it
Council. These products can be bought in the store of lighting or remove from the old electrical appliance.
5. Selflessness
6. Two plastic bottles of different diameters
Council. A bottle of larger diameter is selected, based on the desired size of the lamp and its shape. A good option can be the usual two-liter packaging. Take into account that embossing on the bottle is imprinted on the outside of the lampshar.
Cover. A bottle of smaller diameter should be without embossing. Its size must be chosen so that inside the cartridge can be placed with a lamp. The inner space of the lampshar should not be too narrow and long so that later you can change the lamp without problems.
9. Tin Bank (optional)
Instruments
- Scissors
- Kusachachi
- Small drill or screwdriver (optional)
- Small shovel for concrete stirring
- Hacksaw (optional)
- Paper knife
Do not forget:
- cement mixing capacity;
- set the surface of the table;
- prepare a cloth to wipe the arms and excess concrete.
After everything you need prepared, you can proceed to work.
Step-by-step master class with photo
1. Cut the bottom of the greater bottle.
2. Drill a drill or make other ways to open the lids. It is more convenient to work when the covers are dressed on the bottles. Remember that the holes should be located strictly in the middle so that the thickness of the plaffron is the same on all sides. The hole must have such a size so that the tube is free to pass into it.
3. Secure the tube on the bottom of the bottom bottle.
3. Attach the top bottle.
As a result, you should get this design:
4. Refix on the sides of the bottle with screws. This will avoid displacements.
5. Prepare a concrete mix. Fill the form. During work, do not forget to shake the bottle to provide a dense adjacent concrete. Also, it can be raised with a wand.
Council. If you want the surface of the lamp to be smooth, use a thick concrete. Liquid consistency will help create an unusual surface effect covered with sinks.
Council.To pour concrete more conveniently, you can install bottles on a tin jar (as shown in the photo below).
6. After the concrete is tamped, you can remove the screws and spend the trimmer, pressing on a smaller bottle. Observe accuracy so that the center does not shift. Form the edge.
Council. The edge can be both smooth and asymmetric.
7. After a partial drying of concrete (depending on the brand used), you can carefully remove the bottles. Do not forget that at this time the lampshed fragile and it is easy to damage it.
Concrete lamp is a stylish loft accessory who will make an apartment unique, especially if it is done with his own hands. To date, various famous design brands offer interesting solutions of suspended lamps made from concrete. But such things are usually too expensive, or difficulties arise with their delivery. Therefore, we suggest you make such a loft suspended lamp made of concrete with your own hands. All that this will require: two plastic bottles (one large, the other smaller), a liquid cement mixture with sand and water, a small metal tube with an outer thread, four wood screws and an electric wire connected to a cartridge and a light bulb. On the very bottom, there is nothing difficult in moving the lamp from concrete with your own hands. So, proceed.
Step 1. Drill the assisted in the covers of both plastic bottles with a diameter of the metal tube.
Step 2. Cut the large plastic bottle into two parts with the help of a stationery knife and scissors. This will be the main form, the so-called "matrix" for our concrete lamp.
Step 3. Curtain the metal tube through both covers of bottles. Use nuts to fix bottles by screwing them on the tube.
Step 4. Secure plastic bottles with each other using wood screws.
Step 5. Prepare a liquid concrete mix of the desired consistency.
Step 6. Then, in the resulting form of two plastic bottles, fill the cooked mixture of cement.
Step 7. After concrete hardens, unscrew the locking screws and remove the extra parts of the plastic form. Optionally, you can deploy sharp corners using emery paper.
Step 8. Insert the electric cord into the hole of the metal tube, which turned out to be fixed in the concrete base.
Step 9. One end of the cord is connected to the cartridge with a light bulb, and the other to the electric fork.
Everything. Our stylish concrete lamp is ready.
Also add a video with a detailed description of the process of manufacturing a lamp from concrete in English. If desired, you can experiment with various forms of plastic bottles and the composition of the concrete mix.