Soap bubble generator

• Compact models. The principle of their action is to rotate the only wheel and fan that inflates many soap bubbles different size. Such models need to be suspended so that bubbles fly from above, otherwise the desired effect will not succeed.
• Large generators. These units in addition to two main wheels and fans are equipped with additional, to achieve the effect of entertainment. They are pretty bulky, but very productive.
• Drum options. These models combine the advantages of the two previous options - compactness and productivity. Using these generators, a stunning effect is achieved - just soap extravagania.

Life is multifaceted and this is beautiful. It has joyful and solemn moments: birthdays, incendiary parties, bright concerts, festive gatherings. It is for such cases that created soap bubble generator - A device that will bring in your life the sensation of happiness and eases that can be seen with your own eyes.

Unforgettable soap show: how it works

Among the variety of options to be lost. In order to understand which model to choose, you need to get acquainted with the whole range. So, what generators are:

· Compact models. The principle of their action is to rotate the only wheel and fan, which inflates the set of soap bubbles of different sizes. Such models need to be suspended so that bubbles fly from above, otherwise the desired effect will not succeed.

· Large generators. These units in addition to two main wheels and fans are equipped with additional, to achieve the effect of entertainment. They are pretty bulky, but very productive.

· Drum options. These models combine the advantages of the two previous options - compactness and productivity. Using these generators, a stunning effect is achieved - just soap extravagania.

But every holiday is unique. How not to make a mistake with the choice suitable model exactly for your celebration?

Soap bubble generators: Selection Rules

Since such products, as already mentioned, differ structural features and dimensions, as well as depending on this, price amplitude, then the choice rules - the most important thingTo consider before buying.

First, it is necessary to determine what event is planned and how often the generator will be used, and should also take into account the potential to carry it.

If the generator is needed, for example, in a nightclub, where it will be constantly constantly, then, accordingly, it makes sense to buy a large 2-fan option. It will provide multiple unforgettable soap bubbles, designed for a huge audience. This installation will be static in the same room, so its significant sizes and weight will not bring difficulties with operation.

If a small celebration is planned in a circle of friends, family, in conditions kindergartenwhere the generator is planned to move or use on the street, then a compact small device with a single fan is suitable.

Drum model - perfect option In all cases described above. She gives great amount Sparkling bubbles of different sizes flying up as it will be intended.

It is worth focusing on environmental purity Liquids for refueling generators, which gives the right to boldly use products for children's holidays. Making right choiceYou will get a delightful result.

In this video tutorial, we will make a soap bubble generator. This is a very funny homemade, especially if you have small children at home.
To begin with, we take the bottles themselves for soap bubbles. We will need only rings through which bubbles are inflated. Eight such samples will be enough for us.
In one of the lids from them you need to make 8 holes across the entire circumference. Now in these holes, we draw rings. The next step we will need absolutely any motor who will twist this design. I will cut the rail of a certain length and in its upper part we will make a hole. In it fix the motor.
Next action take steel wire, I will be shifted as shown on the roller and fix on the rack with the help of screws.

Let's make a homemade fan.

Now we will need a fan that will continuously blow on rings and run soap bubbles. For this purpose, it was possible to take an ordinary cooler, but to be honest, it slowly spins, so it's better to make a fan homemade. To do this cut out the contour blade from the fan on paper. Come on it on plastic bottle A little tilt and cut. Naturally, we will need two such blanks.

Next, cut out out plastic card A small workpiece, we make a hole in the center and at the edges of glue blades. Now we dress this design on the motor's shaft and then with the help of hot glue, secure it on the base of the wire.

Final assembly.

In the next step, we need to take the container in the center of which will fix the rack.

Now, with the help of hot glue, we will put this carousel on the shaft of the main motor.

The next step must be connected to the entire design to the power supply. For example, you can two old phone chargers and connect to one motor, and the second to another.

Recipe for soap bubbles at home.

Now everything that remains is to make a solution on the recipe and pour into the container, then connect the structure to the power supply. Let's now see what we did. Per 1 liter of water, 70 grams of any detergentwhich is used for dishes and 2 tablespoons of glycerol. For better effect, you need to put the solution for one day. If children will have access to the solution in the domestic and other conditions, then it is better to take no detergent, but shampoo.

As you can see, the soap bubble generator works simply wonderful. Such a toy can be entertained by passers-by, and if you have small children at home, they will be in a great delight from such a self-made. Especially they will be happy from what she is made with their own hands.

The composition for soap bubbles that I used:

On 1 liter of water 70 grams of detergent for dishes and two tablespoons of glycerol + to settle all this day!

Surely many of you have heard about such a device as a generator of soap bubbles. This is an integral part of the props for festive and animated events. It is used on children's birthdays, at weddings, on discos. So I decided to buy it for working with children.

European production generators turned out to be quite expensive for me, so I turned to the famous Aliexpress Asian online store. The choice fell on small car https://en.aliexpress.com/item/au-plug/32836363773.html

Unfortunately, there are no stamps from this unit. But he meets all the requests that I have: high intensity of work, meals from a socket with a European connector and ease (only 2.5 kg). By the time of purchase (December 2017), the soap bubbles generator cost 1794 rubles at a discount. At a time when European analogues are sold from 5000 rubles.

The generator came in three weeks, in the corporate box. The handle went separately from the device, if desired, you can fasten the screws attached to it. The machine, despite its small size, It works well: blows a lot of bubbles, without problems covers space up to 16 sq.m.
It works exclusively on a light professional solution of soap bubbles (pay attention to the hardness "does not pull"). Such can be purchased at any store of festive goods.

The insides (the blades themselves and the fan) are made of plastic, so it should be used carefully. Inside the wire is not hidden anywhere in the open access. With intensive use, I think the device will fully work out 2-3 years. Pay, as they say, more than once!

Of the minuses it should be noted that the blown bubbles of a small diameter. Also, if the device is set to height below than 1.5 meters, then bubbles will fly to the same place and will not have time to burst. Then the "beautiful puddle" appears on the floor

Such a soap bubble generator is in operation for 3 months and completely satisfied me and my customers.

Soap bubble generator ... Who was this name invented this name? Let it be bladewwalka! 🙂
You can certainly buy, but make yourself It will be easier and cheaper!

In principle, why start ... and where?

With shopping hike.
We will need the following things:

• Soap bubbles in banks with folding 8 pieces (3 bux for 8 pieces)
• Termoklay - 11mm. Need 1 wand (several cents)
• Servo from the radio-controlled model (4 buxa B.)
• Box for meals - I have 17 * 10 * 7 cm (D-sh-c) price of about 3 bucks.
• Computer fan, yes maintenance (price from 3 to 10 bucks)
• Power supply from outputs 12 V and 1.5V

In addition to these things, we certainly need screwdrivers, soldering iron, rosin tin, a pair of wiring, tape ... such a plan elementary.

Video work homemade:

How to make yourself?

Step 1. We take soap bubbles, turn off the covers, pull out the shapes of them for blowing bubbles, lay aside 8 pieces, I tried 4 - it turned out that it was not enough.

After that, drill 8 holes in one of the covers, which are pitching there (with the same departure of the lid) and fill with thermoclaim. (Heat his matches - he melts - pour a cake with our forms for 15 minutes) how cool down - stick - screw in small screws to paragraph 2.

Step 2. Servo. Perhaps this is the most specific item. He remained from a radio-controlled machine, the same in helicopters and other radio-controlled models (not toys).
It is needed for slow rotation of forms to blow bubbles.
Initially, it does not rotate, but turns 180 degrees.
In order for he to rotate:
We disassemble it.
We drink the stopper on the gear supfil (it can be seen).
Pull the resistor (3 legs to the board).
We see the engine - cut the stationery blade of the track (two pieces there are fat there) from the motor to the board with electronics, we solder 2 wiring to the motor.
We collect.
We have a slowly rotating engine on the hands, with a routine of forms to blow out soap bubbles.
Power servo drive will eat from 1.2 to 2 volts.
Next, we take a pair of screws with nuts and screw the servo to step 3.

Step 3. Food container. The soldering iron make two holes under the center, in the center in the width of the box, and at the highest point of the box (but what would "blades" almost touch the bottom) At this moment, the server will try to overturn the box, it is normal - when the liquid for bubbles - The effect disappears.

Step 4. Take Powerful fan, and simply screw it in the same side of the food container, having previously done the soldering iron.
I additionally strengthened it also with glands, which can be cut from the profiles for drywall or borrow from children's designer iron.

Step 5. Power supply, servo need 1.2 volt, and 12 volt fan. You can buy a Chinese adjustable power supply, there is also 1.5 for servo and 12 volts for the output fan, output them and connect.
But you can make the power supply itself.
Transformer 220/12 Volt, Diode Bridge, Condenser ...
Fan connect to 12 volts, without any.
SERVEND I connect through an adjustable voltage stabilizer on LM 317 (the price on the market 2-3 bucks is a finished handkerchief - 2 contacts input, 2 output).

At this moment you can pour liquid and run the unit! 🙂

The secret of blowing the original and bizarre figures from soap bubbles does not depend on your skill, but also from the components of the liquid used. In one of the most popular liquid recipes, the main component is glycerin. To prepare a liquid for laying soap bubbles, add to 100 ml of shampoo 50 milliliters of glycerol and about 300 ml of water. This solution is perfectly suitable for devices for generating bubbles.

Ways to create a soap bubble generator

To create a real show of soap bubbles, you can use an ordinary canister filled with air. Also for these purposes the spray with varnish or deodorant is suitable. Another method will be the acquisition of sprayers for aquarium. They will need to add hoses and a cylinder of oxygen, combine them between themselves and put the sprayers on the end of the tubes. Then the sprayers should be lowered into the container with the liquid. After opening the valve of the balloon, the present colorful show of soap bubbles will begin.

If you have very seriously decided to approach the creation of the generator, try finding a suitcase from old fans, players and other electronics. Also for creativity will require: thick cardboard, knife, scissors, ruler, corrugated cardboard, Motor from any player, scotch, fan, gum for money, circus and pencil, nuts and six bottles with soap bubbles.

Assembling generator

To start, take the passion for money and attach the motor from the player to the three-step gear roller. Such a mechanism will transmit rotation to a special receiving roller. The clearance between discs should be filled with a small amount of glue. Evenly shift six plastic loops from bottles for soap bubbles to the disk. Now, during rotation of the disk, these loops will be immersed in a container with a solution. When loops passed by the fan, they will blow large soap bubbles.

The fan should eat from a voltage of 12 volts, and the motor is 5 volts. For stationary nutrition, a computer power supply will be required. Stationery clips can be used as axes of gear rollers. And the mechanism is better to perform from cardboard. To prevent abrasion of paper parts, wrap them with scotch. Such a device will be enough to arrange a real foam show of soap bubbles.