How to make a flower from phoamyran for beginners. Flowers from Foamiran photo

Most recently, on the shelves of our enlightened needlewomen appeared toys, crafts from Foamiran. Raw materials for them are another know-how, presented to us by the chemicals of the physicists of the world. According to the composition, it resembles foamed rubber, and according to the technical characteristics, which are explained by the presence of linyl acetate, plastic suede.

Judging by the name, you can immediately guess where the wind blows, and you will be right. It was in Iran that the production of this wonderful material was organized for the first time. The company "Foamiran", which was the only one in the world that produces a new landing raw material, gave him his name.

It is not difficult to guess which country picked up the relay. Chinese Foamiran has the same qualities, but, as usual, a little worse. This is more than compensated by its number and low price.

Which is a new diverse raw material. These are commonly familiar sheets of soft porous material with a thickness of 0.8-1 mm (Iranian) or 1.5-2 mm (Chinese). His wonderful properties:

material non-toxic;
good painted;
has a memory form. After any dynamic or kinetic load, the Foamiran restores the former configuration;
easily cutting in conventional scissors and is pushed by a curly stapler;
Fom (so it began to call the wizard) not hygroscopic. Crafts from it can be washed with water;
most important quality: Foamiran changes the form when heated and "remembers" it.

Fat material is well suited to mastere your own various toys. Fine bouquets are obtained from thin sheets.

Foamiran's first handicraft

For novice masters, it will be forces manufacturer of ordinary roses. Before starting the master class, prepare everything you need.

It will take:

foamiran two colors (purple and green);
scissors;
iron;
hot glue.

Constructing flowers and toys from the Foamyran, their details cannot be connected with us the usual glue of PVA. Take into service the glue UHU "Creative" or spray-glue UHU "PoveSPRAY".

Master class for beginners

Cut with your own hands from the purple foamioran rose petals of three sizes, and from the green - a socket.
Put on a warm iron or a heating battery several petals and leave them for 3-5 minutes.
Warm petals do it with your own hands and deploy, stretching the middle. Form the firing - the middle of the toy.
Glue the hotels with hot glue in a circle first small, then medium and at the end of the large size.
Heat green socket and form leaves.
Get the rosette to the flower with your own hands.

Master class without iron

Deformed rosette petals really without heating with special devices. They can be simply heated with their warmth, rolling between palms, twist the edges in different directions, and then stretch with their own sidelines. The effect will be almost the same, but not so strong.
Waving a sufficient number of petals, spread them in ascending order.
Form the "Eskimo" in the form of a pear from foil, plasticine or other material and stir all the petals around it. Remove the "Pear", leaving a wand.
Highlight instead of a color with your own hands a piece of watts and wrap it with green leaves from Foamyran.
Here is such a beautiful rose it turned out.

Tools and materials

In order to turn out from beginners to turn into experts and hold the master class, it is necessary, at least, stock special tools and devices. Rosets and daisies can only be done for themselves, but if you want to give close toys made by your own hands, you will have to purchase:

stacks and boulders for rounding shapes and drawing of residences;
weiners and Molda, they are called them molds, to impart concrete forms, textures and reliefs;
brushes, sponges of dyes;
pastel, acrylic, gouache and other dyes;
curly holes and curly scissors greatly facilitate work on cutting the same fragments;
wire for the framework of toys and plants stems;
stamens - Wire with a ball;
type-tape, which is wrapped with wire so that it becomes similar to the plant's stem;
toothpick;
scissors and sharp knives;
floors and pliers for working with wire;
glue pistol;
iron or any other heated to a temperature of 40-50 o with the surface;
accessories for jewelry.

But most of all you will need the desire to make flowers and toys do it yourself.

Artificial suede, or "Foam", came to us from Iran, it was there for the first time produced foamed ethylenevinyl acetate. Almost today, the needlewomen all over the world know that "Foamira" is just the name of the company ("Foamiran"), which became for the first time to produce plastic rubber. The name was so fastened for the material that it began to be called "Fom" or "Foamiran" and in no way. Today, the editorial office of Housechief prepared for its readers a selection of the most beautiful of artificial suede. You are waiting for detailed master classes with photos and videos with fragments of work, telling detail about how to make flowers from Foamiran with their own hands.

Read in the article

We start with Azov: how to make a flower of Ranuncoolus from Foamiran

Ranunculyus from Thomas will look like a real. Such colors are very often used in wedding bouquets or to create spectacular tramples and jewelry.

Interesting fact! If there were no Foamyran, it would have to come up with and call - "the best material for needlework." Why? We answer: it does not wash, stretches well and keeps the form, not toxic, it can be painted.

First of all, prepare the drawing required for work. In the work on the ranhanhus templates look like.

So, all tools are ready, start our master class.

Illustration	Description of action
	We take the pattern with dimensions (which is given above) and look at the first petal. In the mind add to the size of a little more, since after heating the Foam will lose in length and width.
	We mark the toothpick size in the tape with a margin on the shrinkage, which will occur due to heating (approximately 2 cm). At this point, we turn on the maximum power (without steam).
	Heat on an iron. Stretching depends on the thickness of the phoamyran. Hold in a stretched state to complete cooling. In no case we stretch on the iron! Repeated stretching reduces the size of the tape, which is why it is necessary to first make a stock.
	The stretched Foamiran loses in color, it turns out a lighter shade, so it will be necessary to be asked. Acrylic gives the necessary more rich shade. Therefore, for smaller petals that will form a flower center, it is necessary to conduct intensive staining. Make sure that the sponge is almost dry, otherwise a divorce can remain on the Foam.
	After drying, we cut the petals on the template, the smaller the workpiece, the darker the tape.
	Lightly toning the cropped edges of petals of more dark paint, usually 10-15 core petals.
	Cooking for work stacks. Part can be done on your own either. The diameter of the balls on the tip can be different. In our case, from 1 cm. Small in diameter stack will round the core petals, larger - respectively, larger stacks.
	Heat the first stack for the smallest petals. It is important not to overlay the stack, otherwise there is a risk just burn our Foam.
	We press the index finger right hand. It is necessary to keep enough time, since the first petals we need to make more closed. Thus, we create all 7 types of different petals of different sizes using different stacks.
	Place the ribbon under the stem and cut the strip, heating it on the iron.
	With the help of two toothpicks we collect a sheet into the stem, turning into the tube. If you make a flower in a bouquet, you can insert a wire into the center of the stem. Cut the soft tube on both sides.
	Spindle one of the sides for the middle, with the help of scissors, we give an inaccurate look. It should be the impression that this middle of the uncooked bud.
	To create a flower basket, cut out thin ribbons and foam, wind it around the stem. Layers can be periodically lined.
	This is the basis for the flower should turn out in the end.
	During the glitting of petals, it is important to align them in height, focusing on the base of the flower head, the following rows - on the bottom of the already glued petals. Glue applied with toothpicks.
	Do not forget to smoke the base of the flower, as a result, larger petals should be slightly higher than those in the middle.
	We begin processing the leaves to form the base of the flower. We will need seven heading and mold. In our case, we take Moldus from the lotus. Heat the iron and start the heating of our billets.
	We distribute a heated leaf along the Molda, slightly pulling it.
	We glue the petals to the base, slightly raising them to give a natural look.
	Two hours of painstaking work and a unique decoration for you - ready!

foamiran

Rose from Foamiran - master class for beginners

The varieties of their great set, which makes the excellent source of ideas to create plastic copies.

Consider several options how to make a rose from Foamiran.

Important! To work it is necessary to use liquid nails and glue. In this case, you need to use gloves and carefully follow the children in order to prevent burn from the adhesive gun or poisoning.

Templates for roses from Foamiran

Variants of templates can be a lot, like varieties. There are three main types of patterns: for ordinary roses - in the bud there are only 7 petals, lush terry, they are also called peon roses, - the bud can consist of 20-25 petals and semi-eagle - up to 30 petals.

Large interior rose from Foamyran - Production Features

Today, our edition proposes to make an unusual interior rose of gentle color, which can be safely put on or. The master class on the manufacture of large colors from Foamyran will help to understand the principle of operation with dimensional designs of foam rubber.

Illustration	Description of action
	The first stage is the preparation of templates. Cut 4 of different sizes: 8 × 8 cm (7 pieces), 10 × 12 (10 pieces), 12 × 14 (12 pieces), 13 × 15 (8 pieces). And attach them a form similar to petals.
	The next step is toning, you can also take acrylic, and oil paints: mix two colors - red and white. Soft sponge gently stain our workpiece from two sides.
	Heat the petal and start it carefully to flicker across, so that it turned out uneven texture.
	We burn the edges, creating an uneven contour.
	Forming the base of the flower from the foil, inside with scissors recess and insert an empty blank from the coil. We glue glue. Around the base, start assembling bud.
	Each layer must be accurately sneaking with a glue gun.
	As a result, we must have such a dense bud.
	We begin the preparation of unseasured buds. And the first stage is the pinching of petals. The entire procedure exactly repeats the previous steps.
	Boutons put on a wire base, which is created as described in the previous master class.
	Go to the creation of leaves. To do this, we will need Molda and Green Foamiran. Sadim leaves on the wire, winding the twigs of a green self-adhesive teep-ribbon.
	Cut the sheets for the base of the flower. Lightly toning in a dark green color to give the leaves a natural hue.
	The next stage is the preparation of the main branch. To do this, it is necessary to take a thick wire and also toned with its ribbon. The twigs are attached by the usual piercing, for this, the base of the wire is heated.
	Now it's time to connect the flower into a single design.

As a collection, such a design looks quite effectively. For those who are not very sacrificed in the technique of working with Foamiran, it may seem that you have broken a world record for the cultivation of a giant rose.

Flower Tulip from Foamiran - Step-by-step instructions

But the tulip from Foamiran is quite an option for beginners. The petals here are not so much, the material will take quite a little bit, but you will get a lot of pleasure from work! All stages of manufacture are the same as Lily, with the only difference that the tulip is a closed flower. It is important to convey this feature.

How to make a pattern of orchid flower from Foamira

Orchid is one of the most striking representatives of the tropics, she by itself already personifies the paradise rest. Therefore, most often such a gentle flower is created for special celebrations - holidays, the decoration of the bride's hairstyle in the style of the wedding on the Bahamas or Bali.

The flower is created by the scheme already known to us. First, the core is finished using foil. Then "increments" the petals. It is very important to use natural shades close to natural.

How to make small flowers from Foamiran from remnants of material

A good craftswoman is in business. Food pieces left after needlework are never thrown away. Trimming can go to scrapbooking, design of the caskets and the manufacture of small flowers.

How to care for decorations from Foamira

Foamiran, as we have already noticed at the very beginning of our article - unique material. It is not afraid of moisture, it is well clean, practically does not change the form and does not break. The only thing that should be avoided is direct sunlight (this will help lead to fading) and caustic substances: solvents, paints, acetone.

Hi, my dear readers!

Today we distracted a little from global questions and pay attention, which every day more and more in trend. Of course, knitting, sewing, even such concepts as "patchwork" are understandable to many. However, as I understood to communicate with my friends, the questions still remain, and often they concern the source materials for work. For example, making crafts from felt know that many simply replace it on napkins for cleaning. Naturally, it is cheaper, but only to do it?

Today we will talk about what can be made from Foamyran. You will learn what kind of material, for which it was originally intended for which products it can be used, as well as how to care for them in the future. Interesting? Then let's start.

What is Foamyran

Foamiran is a wonderful material for creative people. It is available on sale most often in the form of 50 cm lists or 50 by 60 cm of a wide variety of colors and shades.

Buy Foam, size 60 cm x 70 cm, color: in assortment, at a bargain price with home delivery foamiran "Artheva".

The thickness of the sheets is offered different - from 0.5 mm to 3 mm. This is done in order to get the most remarkable end result, and you need to choose the thickness, pushing out that you have conceived to create. Foamiran is pleasant to the touch and a little resembles velvet, although its composition is a porous rubber. It is worth noting that this material is absolutely safe for both adults and children.

Distinctive features of the material

Foamiran is capable of compliance. It can be heated with a hairdryer or iron. Do not worry if you overheat it a bit, it will not lose your properties, just get a little less than the original template. Stretching the material must be extremely gently, do not overdo it, pay attention to the fact that it is possible to increase the volume of the workpiece by no more than 10 percent, otherwise the Foam can be simply broken.

Basin the elements of your work is better quick-drying glue, for myself I have acquired a glue gun (thermopystoletole) - and work more pleasant, does not spread and dries quickly.

The spectrum of the application of Foamiran is truly huge, since the material is not afraid of water, he is not terrible even a good wash. Flowers from this material are perfectly like alive. No material compares with Foam. Petals at buds are thin, natural, sometimes they are even difficult to distinguish from the present.

Let's try?

Nor describe the material, it is still best to understand its features, only experienced in work. I suggest try to make a flower. It is easy, does not require special skills, and it will look beautiful. So, first, you need to choose the type of the future flower, as well as determine its color. We chose a rose. Then cut the pattern of petals from the cardboard. For the manufacture of roses you will need from 25 to 30 petals.

Go to work

Transfer your billets on Foam leaf. Preheat the thermal system and prepare a hairdryer or iron to warm the material. In this case, it does not recommend warm up in this case, since at the end of the work you will begin to hurt from constant friction on sheets. Putting the iron at the minimum temperature, you are guaranteed to get rid of this problem.

Cutting the workpiece and warming up the gun, apply in turn of the petals. As soon as the petal disappears from the iron, he is ready for work. You can gradually begin to stretch it, to give the desired form. Then start twisting and glue glue. So continue until your bud does not acquire that the form you have drawn.

For those who want to go on

The leaves of the rose or other flower planned can be made with relief. To do this, it is necessary to cut out the billet from the FOAMA, pre-warming up, applied to the pre-prepared form of the Mold for stamping and make a lot. Or independently lay out the desired drawing from the wires of the wire and also give a lot. So you will get an original and unique sheet to your rose or any flower.

Was the flower? Or maybe not one? It is time to think that you can make flowers from Foamiran?

For example, original brooches, hairpins, hair decoration, necklaces and bracelets. Beautifully look at Flowers from Foam on her handbags, clutches. They will also make the unique your shoes.

Excellent solution for interior design, and not only

But it is not worth stopping, the interior of your home will be exclusive if you bring it products from Foamira. So the colors of various shapes and shades can be decorated: pickup for curtains, made in the form of a ring, a frame for a photo or a ceiling. You can also make Topiaria from Foam's colors, they will look great.

Foamir is widely used in wedding salons. They are decorated with everything, ranging from the headland of the bride and ending with cutting devices. The faham allows you to withstand the whole wedding in one style and in one color scheme. Tables, decorated with flowers, and the arches made of them look rich and unusual. Their advantage also is that they are not withering and cost much cheaper than living.

Foods and original New Year decor do from Foamiran.

If there are kids in the house

In addition to colors, you can make magnificent toys from Foamira, including dolls. To do this, you need to take foam blanks of the ball and the pyramids, cut the circle and semicircle from Foam and cover the blanks. The joints are covered with hair cut from Foam. For hands and legs, the base can serve the wire, which is also tightened by Foamiran. Outfit for dolls can be done both from Foamira and from the fabric - to an amateur.

Well, that's all. I hope that my small story will help you in your endeavors and will push to create your own ideas that you will soon share with us and share. And you can help you with wonderful book-instructions for products from Foamyran.

Beautiful crafts from Foamiran enjoy tremendous demand among modern consumers. Products are obtained as natural. This type of material is excellent any deformation and heating at a minimum temperature. On the surface of the Foamyran, you can apply textured lines and make various tint.

Products are accurate and pleasant to the touch. Flowers and various decorations are most often made of it. We offer detailed descriptions how to make a craft for beginners. Board of professionals will help to make a quality product.

Simple crafts from Foamyran

The Internet presents many ideas of crafts and instructions for making crafts from plastic suede. For beginner needlewomen, it is recommended to start with simpler product options. They do not require special skills when working with the material.

We offer to start with the manufacture of dolls. To do this, prepare:

foamiran sheets beige, orange and pink;

scissors;
simple pencil;
wire;
blank of polystyrene foam round shape;
high fixation glue;
markers for drawing eyes and nose.

From the Foamiran, we cut out 4 strips of 3 cm wide. The length of the blanks is 15 cm. Next, 3 strips glue in the form of a ring. After that, there will be 2 small stripes. They are gluing on top of the rings. It turns out a volumetric gang for dresses.

Foamiran is a soft sheet material in a palette of 20 or 24 colors (depends on the manufacturer) used in various types of needlework. The average thickness of the sheet is 1 mm. Foamiran is mostly Chinese and Iranian. The Iranian is considered better. It was in Iran that the technique of making flowers from this amazing material was originated. Foamyran can be painted and toned with paints, patches, powder.
Foamiran is easy to give a shape with light heating (for example, applying to iron or curling tongs), twisting, stretching, processing tools for modeling, etc. After the deformation of the deformation Foamiran stalls the form. That is why it is widely used for the manufacture of topiaries, colors, decorations (brooches, hairpins, rubber, rims), dolls, decorative elements for scrapbooking. Also, products from Foamiran are used to decorate various rooms (apartments, wedding and banquet halls, etc.). Brooshi-flowers made of plastic suede are not frozen under the upper clothes, and this is very valuable quality. Foamyran is an innovative material with an infinite potential for creativity, it is soft and silky to the touch. Its feature is the ability to a small stretching (up to 10%). This stretching is enough so that the material is able to accept and "remember" a new form. Partly well this material is molded when the heat of human hands is influenced (it does not dock and not lipnet). You can safely compress and twist plastic suede, slightly stretching it. The material will easily take a new form. However, the excessive tension will lead to the rupture of the phoamyran. The elasticity and relative strength of the material are due to the fact that the composition of the phoamyran includes ethylene and vinyl acetate. Poly suede with a sheet thickness of about 1 mm is easily cut by scissors and cut down figure composters, as well as special machine for cutting down. For work with plastic suede, only specialized types of glue will be opened. with a strong fixation or adhesive gun.Foamyran has a slightly pronounced porous structure, but at the same time it has low water absorption. It is spoken, racks to atmospheric influence and chemical substances, not toxic and harmful to the environment. In the present moment, the material is certified for its use In children's work. You can also meet it called: "Fom Eva", "Foamiran", "Foam" or "Foam".

How to choose Foamiran?

Most often, Foamiran meets Iranian or Chinese production. foam Eva more tender to the touch, thinner, with an uneven surface from 0.7 to 1.2 mm. There are 22 colors of natural shade in the palette. It is ideal for creating realistic colors. The Chinese foam is much denser and rougher, with a uniform surface. Flowers in the palette of 25 different shades. It is used in scaqing, to create dolls, jewelry and accessories.

Master Class

Lily

For the manufacture of a flower, we will need: - sheet of green and white phoamyran; - stamens; - acrylic paints; - cardboard; - felt-tipset; - thermopystole; - wire; - toothpick; - Iron; - scissors.

Preparation method:1. Make a cardboard billet of lily petal at 6 cm, cut out.2. For this template, cut on white shape 6 petals.3. Toned them on both sides with pink-lilac color. To make the petals to make textured, heat them on the iron, drawing a toothpick resilion.5. The edge of the petal is also heated, giving waviness.6. Make a brown felt-tip pen at the bottom of each petal several points, giving the flower natural look .7. For the pestle and stamens, prepare a wire of 0.3 mm, stamens and small rhombid pieces of plastic suede, painted in black color. 8. Stick them to the wire .9. Before assembling a flower cut the leaflets on the green Foamiran.10. Apply texture to leaves, heating at the iron.11. Around the glued stamens to the pestle, glue the first row of petals (3 pcs) .12. The second row of the glue in checkered order.13. Leafs of the Clate, as like Lily below.

Chamomile

The modest field flower is recognized as a family symbol, so they became popular "chamomile" weddings with artificial daisies. We will tell you how to make these beautiful flowers from Foamyran on the master class. For the creation of the flower, we will need: - white Foamiran; - cardboard; - oil pastel; - line; - glue; - pencil; - transport.

Preparation method:1. On Foam Circle, apply circles contours (3 pcs) at 9 cm, cut 2. Then cut the strip 2 cm wide and 27 cm long for creating a middle, paint in yellow. Fold the strip in half, glue around the edge, cut the bachrome from the fold. Twist the core with a spiral, lubricating glue.5. Cut the cardboard circle of 9 cm, then with the help of the transporter, stretch the cuts for petals.6. Use the resulting pattern to cut white petals.7. Petals cut, not reaching 2 mm to the core. Heat the tips of the petals, rounded, like a real Romaist .9. Put the blank for the middle, stick 10. Make the same 2 more row of petals, fixing glue.

Shipovnik

1. From the pink from on the template cut out the flower.

2. Oil pastel, paint riding.

3. Draw him a form.

4. Slash in the center a small hole.

5. To create the naturalness of the flower, we make the stamen. For our work, we will need: glue, painted making, beads, yellow chest and thread. Beads are tightening with yellow foamiran, fill in threads.

7. We apply glue and Macaw Bead into the semolina.

8. Make the stamens.

9. All fasten threads.

10. Insert the prepared stamens in the flower center (hole).

11. For the pomp flower, add another billet flower.

12. Cut the leaf and lined from the green frog.

13. Green acrylic paint with the help of a sponge tinting leaves. Connect the details.15. To fix the brooches, cut out a small circle from Thomas.16. Fix the brooch to the flower.