Self-adhesive film convenient to use and widely used finishing materialwhich has a number of advantages:

• It can be used for of different types surfaces.
• This material is durable, practical, is environmentally friendly, has an extensive flower paletteThrough what is perfectly suitable when creating any interior design. It is also able to update the old, shabby furniture so that it will look as if just from the store.

Examples of using self-adhesive film

How to salab furniture with a film

So, the accumulation of furniture by self-adhesive film is not the most difficult task, but still it is necessary to know a number of features. Before purchasing a film, you need to measure furniture that is subject to pasting. And already in accordance with these sizes, it is acquired, not forgetting that rolls have different widths.

The process of falling furniture itself is as follows:

1. From furniture It is necessary to remove all the handles and other unscrewing decor elements.
2. Then, the surface must be thoroughly rinsed and degreased. To do this, you can use detergent or ethyl alcohol. Such a procedure will be enough if the surface is polished or lacquer without damage.
   And if you deal with the surface of plywood, or boards, then it requires pre-primer methylov looping glue or polyester varnish. If the furniture detected cracks and damage they should be eliminated using sandpaper, putty and coated with acrylic soil.
3. Next, a piece of films you need is cut off. On its inside there is a special centimeter grid, which is easy to cut off the film easily.

How to stick the film without bubbles

When pasting, the film is separated from paper to several centimeters, applied to the surface, after which it must be delayed with one hand, and the second smoothing, using a clean, dry cloth. Getting rid of thus from bubbles. If after the pasting they still remained to be removed, pushing the needle.

Or you can use another way of avoiding the appearance of bubbles. To do this, before the liner you need to sprinkle the surface weak soapy solution. In this case, the film will slide, and air bubbles will be eliminated at times easier.

If you recently did repairs or just going to it to proceed, then besides the repair you are surely tormented by the choice of furniture. For example, in the new bedroom would not hurt new cabinetwhich harmoniously fit into new interior. How does most people do? Buys a new closet, and the old goes on the landfill or in country house. However why spend money if you can do stylish cabinetWho will look at any interior from the old! And for this, it is not at all necessary to be a designer or have tremendous skill in the restoration of furniture. Have a good idea, and a little time and strength.

For example, with a small application of the forces and an excellent photo of the application, you can create a stylish cabinet that will easily become a "star" of almost any interior. To do this, it is enough to clean the sandpaper the door of the old cabinet, paint them with white paint, and then glue the image you like to the cabinet, which you can print a large format in any large photo studio. After that, the wardrobe is covered with colorless varnish.

But to give the old cabinet of the new style at all, it is not necessary to use beautiful photos. You can decorate it with the help of curly slats, which will be found in every business store. And then paint it paint with divorces. You can see how it is done in the picture. Thin rails are nailed to the closet, and then it is painted in blue. As a result, instead of the traditional factory cabinet of the 60-70s, we get a stylized Mediterranean cabinet of the late nineteenth century, which looks great in a gentle blue interior.

If you have an old favorite cabinet, who saw the sorrowing slightly, but very comfortable, or you do not have a plan now to buy a fashionable compartment compartment, you can update your cabinet with self-keys film.

Film-self-playing is found in various colors and patterns, which will make it easily from the old cabinet make original furniture , you can cover the shelf film, update the locker on the balcony or kitchen, and also improve country furnitureYes, and a lot of other can be done using a film.

For example, as I updated your wardrobe:

The self-tier film is found two species - this is a standard film that can be glossy or matte, various children's, marble patterns and the like.

As well as a special film - furniture, door or metallic, for various worktops.

When working with self-adhesive film, you must comply with certain rules.:

1.Peep the surface under pasting, it is necessary to remove dust and dirt with water and adding detergents. The surface should be smooth if it is not, then it is necessary to align it with the help of primer or plaster.

2. The necessary pieces for pasting from the wrong side of the film are necessary to remember the allowances on the edges, where they are required.

3. In order to glue the film, it is necessary to remove the protective paper from the wrong side to a pair of centimeters and the adhesive side to fix to the surface coated.

It is necessary to watch closely during gluing so that air bubbles do not appear, so it is necessary to glue very slowly and gently, all the time smoothing the surface of the film.

4. If bubbles were formed, which could not be deleted, then you can pierce them with a needle and smooth out.

We present you 4 tempting ideas, how to update old cabinet and turn it into stylish element interior. You will be helped by several cans of glossy paint, wallpaper, glue and your limitless fantasy.

Update old cabinet

Color it in retro style - modern

How to do it:

Remove the boxes, then clean the cabinet with sandpaper and paint the cabinet in two layers of glossy paint. Make blanks for the front part of each box, cut out a special knife shape made of adhesive plywood, then glue them to the box. Measure the width and height of each box and cut down four moldings so that the edges of them are connected at an angle of 45 degrees. Paint them with white glossy paint and when the paint dries, stick them to the boxes. Wrap the handle with a white tape from the cabinet, then drill the holes in each box and insert the handles.

What you need:

White glossy moldings;

Quickly dry glossy paint;

Plywood colors of african mahogany;

4 handles for drawers;

White tape.

"Play" with the color of the cabinet

How to do it:

Remove the handles from the closet and paint the main color all the cabinet and retractable drawers. You can even paint the cabinet in two layers. The cabinet will be painted with three colors, so after the paint is dry, spend the second color clear line where there will be a transition. Then spend another line where the third color will be. Then wet the abundantly brush of the second paint and brush down from top to bottom, slightly pressing the brush at the first line so that the paint flows smoothly down. Do the same with the third color. And the handles of each box paint the appropriate color.

What you need:

Chest of drawers;

Fast drying glossy paint.

Charm of mirrors

How to do it:

Remove drawers. Cut the wallpaper strips for the front side and glue them to the closet, on each side, retreat 1 cm to flick the edges of the cabinet. The wallpaper glue is absent to the wallpaper and, when you stick them, start them to smooth around the edges. Cut the wallpaper for
The rest of the cabinet and repeat the same thing. After the paint is dry, cover the wallpaper with varnish. Measure the dimensions of each box and the tops of the cabinet. Order mirrored panels and measure the dimensions of the handle holes. Attach the panel with special glue. After the glue dries, screw the handles - but do not tighten them too much, because the mirror can crack.

What do you need:

Mirror;

Special glue for mirrors;

Handles for the cabinet.

Be sucks - use 3D effect

How to do it:

Make big letters of any font you like in accordance with the proportions of your front drawers or format the text in Microsoft Word. Or Adobe Illustrator and go to the firm that will help you cut letters from MDF. Remove drawers and paint them facial And side parts in two layers of glossy paint, then do the same with the cabinet itself (except for the back wall). Stick each letter using joinery glue. Give wheels to the closet, it will give him fashionable, modern view.

What you need:

Text from MDF (order it construction company). Text need to paint in white color matte emulsion;

Fast drying glossy paint for Celtic Forest color cabinet;

Carpentry glue;

I donated the old kitchen hinged cabinet. He was completely decent and throw out such a pity, and I wanted to save on the purchase of new kitchen furniture, which we did not have. Then I decided to restore this wardrobe using a conventional self-adhesive film.

The colors in the store turned out to be very much, and the price of such a film is small. I acquired two meters of films with a width of 45 centimeters.
At first I unscrew the old, lost the form of furniture handles.

Since the cabinet was previously past the film, it was necessary to shoot it. It is removed simply enough, but leaves behind an ugly sticky layer, which also needs to be removed. I removed this layer using a conventional cleaning powder and an abrasive sponge. I can say that I had to lose good, but I still cleaned the closet.

Doors need to be unscrewed to be more convenient to shrank them.

Next, it is necessary to measure the length and width of the film for the doors. We take the length and width of the film with a margin of 3 centimeters.

Then separate the edge of the film from its base and gently apply to the top or bottom of the door with the front side (see the photo below how it is done). Note that it is very important to separate only the edge of the film, and not all right away.

Now take a piece soft fabric And, having smoothing her film, glit to the door. Right hand Slowly pull as the basis of the film, which is located downstairs, and the left can constantly smooth the front side. Thus, the film sticks very smoothly without bubbles and bends.

When the facial part of the door is placed, turn the door on the contrary.

We proceed to the salary of the end parts of the door. To do this, we glue the film first to the bottom (or upper) end (see photo).

Next, we make an incision on the side in such a way, as shown in the photo, and wrap the cut piece, sticking it.

The part is cut with a simple stationery knife.

Come down the remaining pointing edge and glue it to inner side Doors. Then you process the angle on the other side. Also we glue the end from the opposite side.

Cut the edge of the film along the long side of the door and glue it.

Sticky edges cut the stationery knife or ordinary scissors.

Quite often, we have to deal with the old and served our furniture. There is a need to alter and decorating. What to enclose the old closet and how to update it - the answers to these questions will help to decorate and give, so the second life of your furniture.

Definition of the task

The main problem is that the old furniture, which, it would seem, for a long time and quite regularly served as its owners, sooner or later hesitates, it becomes unsuitable and does not fit into the updated or more modern interior Apartments or country house. However, it is interesting. In most cases, the cabinets themselves, the servants or bedside stands remain quite strong and are able to stop even long enough. It is for this reason that many owners think about how to decorate inside and outside, having completed partial, and sometimes full restorationIt would seem that have already come to the dissent of the things.

It makes it think about how to attach the closet with wallpaper and can it be finished from some other material (fabric, paint, mosaic, self-adhesive film, photo wallpaper and so on). Does it make sense to decorate the entire cabinet completely or can you update only the doors?

Tip! For complete pictures you can also decorate chairs, chairs, coffee table etc.

So, we will try to look more carefully for how to enclose the closet with wallpaper (photo examples show how it is implemented in practice), updating its design and transforming it appearance. The first thing I want to say is what can be used different colors, as well as various options their combinations. This finish will help diversify the finish. In any case, if we talk about the most common ways of decoration and decoration, you can select such options as:

1. Actually, wallpapers for a wardrobe (coupe, book, kitchen and so on).
2. The fabric is also an interesting coating.
3. Photos within, as well as photo wallpaper.
4. Art mosaic.
5. Beautiful mirrors that can be used including inside.
6. In addition, you can create an item using pastel colors paint.

Of course, each of these technicians, which allows you to update the furniture, has certain advantages and disadvantages. In any case, what would you prefer, you can be firmly confident that this will allow not only to preserve additional finances, but also with your own hands to create an extraordinary and attractive subject of the interior. Be that as it may, today we will tell about how to attach the old wardrobe with wallpaper, sharpening attention precisely on this method of decor.

On a note! If you are interested in how to attach the old cabinet with a film, you can be sure that such a self-tier is glued at about the same technology as the wallpaper on the closet.

In fact, you can, which, in fact, are a close analogue of self-stick film. So, first of all, let's find out how to better pick up suitable materials.

Choosing finishes

Cabinet decor Wallow begins with right choice Cleansing And if the color, the presence of patterns and texture can be the most different, then one must be constant: high quality Materials. Additionally, I would like to note that there are certain recommendations that would not hurt to take into account. Here are the most effective of them:

Condition	Council
Drawings and ornaments on the doors in the room	It is desirable that at the finishing of the cabinet used one-photon wallpaper or film.
Light wallpaper on the walls	It is best to perform a cupboard in more bright colors
Application of photo wallpaper	They can be used, but it is desirable that it was in advance that narrow optionswhich can be pasted on the doors.
Self-adhesive wallpaper or film	An excellent option for those cases when you need to quickly and inexpensively transform the interior of the room.
Interior decoration	Inside, your furniture can be plated more saturated tones.

The material itself can be as more affordable (paper rolls that are well suited if you are covered with wallpaper bookcase), so and deteriorating and, with quite strong (vinyl wallpaper coatings or PVC film). This is especially true when decorating kitchen furniture. At the same time, I want to say something and about those cases when the decor of the cabinet wallpaper is made, but the working surface of the furniture is impaired and has some damage (chips, scratches, and so on). In such cases, it is desirable to use thicker wallpapers, such as vinyl or phlizelin. This will avoid the manifestation of mechanical damage in the final decor. And now let's consider briefly step-by-step instructionswhich will help to understand how the closet pasting is performed with their own hands.

Stacking

So, first of all, we will need to prepare all necessary materials and tools. We are talking About the line, spitel, pencil, scissors, emery paper, and, of course, the glue and tassel for him. In cases where the working surface is uneven or strongly damaged, you will need to use putty and primer. You should also pay attention to what it is desirable to decorate not only the walls and doors of the cabinet compartment, but, if necessary, update the handles, loops, legs and other structural elements.

Now you can go to the preparation phase. To do this, you will need:

1. Perform a complete dismantling of old fittings (pens, jewelry, loops), as well as internal shelves, as well as removal of varnish or paint if they are.
2. Eliminate dust and dirt with a wet sponge or cloth.
3. If necessary, you must apply a layer of putty (we use a spatula) to damaged areas. After drying, the putty must be treated with fine-grained emery paper, aligning the surface.
4. Finally, apply a layer of primer (you can use strongly diluted with water).

By the way! The paper allows the use of wallpaper remnants, which will help to use already unnecessary, it would seem material.

After completing all preparatory work You can go to the labeling of wallpaper. Here are the main stages of the work:

1. After careful measurement different parts Furniture It is necessary to measure the corresponding pieces of wallpaper and cut them.
2. Removal of the wallpaper glue, you can move to its application to the working surface. To do this, it is better to take a special brush for such work.
3. Having attached carved sections of wallpapers, press from, and then "pass" from above with a roller or special plastic scallop For smoking. So you get rid of folds and bubbles.
4. Install back all dismantled design elements. This can be done only after complete drying of the adhesive composition.

Use film

Some prefer instead of wallpaper glue a special self-adhesive film. With regard to the process of sticking, there is practically no difference here. Moreover, placing furniture with decorative film even easier than wallpaper, because you do not have to stir and apply special glue. Everything is done quickly and efficiently.

Outcome

If you think about what is better to attach the old cabinet to update it and breathe into it new life, there are several options here. One of the optimal, in terms of simplicity of work, options, is the choice in favor of decorating with wallpaper or self-adhesive film. Thus, you can save a significant part of the family budget by conducting a kind of restoration and abandoning the purchase of new expensive furniture. By the way, another one interesting way decorating is the decoupage of the cabinet with their own hands. However, this technique is somewhat different from what we tell in today's material.

Gallery interesting options (Click photo):

6662 0 1

How to Pliste Wall Cabinet: Furniture Restoration Ways

Sobota old furniture You can upgrade with your own hands. Cabinet Casting Wallpaper is the most accessible design receipt that does not require skills and attachments. I'll tell you about budget ways to restore furniture.

The essence of the problem

Over time, the furniture loses novels, looks old-fashioned, does not fit into the interior of the room, has defects: scratches, cracks, chips. You can update the cabinet with your own hands in one day. There are ways of furniture design, even newcomer, without skills and knowledge.

The most popular reception - pasting wallpaper. Using the trimming of honeycloths, which remained after repair, you decorate the closet and update the interior. You can accumulate the wardrobe with the same canvases or component pieces different species. In any case, your furniture will become an exclusive.

Choice of wallpaper

A good result depends on the quality of wallpaper. Thin paper should not be taken - they quickly twist, they are torn and cause difficulties in the work.

Take vinyl, and better fliseline. This category has a dense, elastic foundation that can reach. Such species are convenient to trim the corners and cut the canvas.

Color, drawing and texture must be harmonized with the setting and selected individually. I offer a few examples:

• For room B. light TonesThe cabinet is made bright or on the tone of the walls, but with a catchy pattern.
• Colorful wall cover pattern - the cabinet is necessarily monophonic.
• In small rooms are used by the reception of one-window. Furniture facade Made in unison with walls.
• For kitchen cabinets, choose options for marble or wood structure.
• Amateurs non-standard interiors Use pictures.
• Self-adhesive wallpaper greatly simplifies the work and relevant to the decor of the facades.

It is important to take into account performance. On the roll label schematically displays moisture resistance, tolerance to UV rays. Large defects, potholes on the outdoor panels manage to "hide" under the leaf with thick color, small pattern, vinyl spraying.

Cabinet salary

Any wardrobe can be decorated. Stocking applied not only on facade panels. Restoration can affect all parts that you will be periodically before your eyes: all internal space, including retractable boxes.

Decor facade, doors and side walls

If partial pasting is planned, the facade cannot be excluded. This is a central element that is constantly in sight. You can exclude updating internal boxes, side walls.

Decorative design has several options: a single coating or alternation of several materials. Many prefer to apply a bulk patchwork. Such a technique consists of alternating different wallpapers, sliced \u200b\u200bwith squares or rectangles. Ready product Pleases brightness and variety.

Color I. stylistic solutions depend on your taste, desire and general design premises. Experiment with shades, contrast, drawing. In a monoton room with pastel walls, make a creative wardrobe with rainbow bright doors.

Decor of the rear wall of the rack

There is no door in the rack, through open shelves The rear wall is visible. Excellent solution There will be pasta inner panel. On the beautiful background Any items installed on the shelves will be advantageous: dishes, figurines, vases, souvenirs, etc.

Decorating rear wall Rack, choose wallpaper contrasting with walls. Your task is to designate and highlight the cabinet. I wonder the walls with patterns and geometric pattern.

You can use a flat monophonic fliesline or vinyl, remaining from repair neighbor room. This reception connects the premises and creates a comfort.

If the rack has sectional construction, for each part, pick different wallpapers. You will get a large-scale imitation of patchwork sewing.

Decor inside the cabinet: boxes, walls, doors

The facade of the cabinet estimates the guest, only the owner looks into the inside, so not everyone is decorated inner space. If a good appearance is important for the interior, then the filling pleases only households.

Wallpaper you can decorate the opposite side of the door, the shelves, interior walls Cabinet, boxes. Hidden from foreign explosions of the cabinet, will create a neat look. There are no special recommendations here, it all depends on your preferences or the presence of wallpaper residues.

Some like it when the open door is bright red, someone does in tone with outdoor decoration. The predominance in the wardrobe is a monotonous thing, well will complement interior decoration With ornament or with bright flowers. For any options, two colored stripes or a small cell will suit.

Self-tech is applied only on a clean and low-fat surface (alcohol, solvent). If it turned out bubbles, they are poured with a needle and smoothed with a dry cloth.

Required tool and material

• Rule / Roulette,
• pencil,
• brush / roller,
• scissors,
• sharp knife
• pVA glue or bulk,
• sandpaper,
• putty knife,
• wood Plotchevka,
• primer,
• napkin / rag,
• wallpaper.

During the restoration of the furniture, it is advisable to change the handles, lining on the locks. it important moment in the exterior update.

Preparation

First of all, handles, moldings and other fittings, located on the working surfaces, are dismantled. Free the cabinet from the filling: lingerie, shelves, boxes.

We prepare the surface under pasting - it should turn out to be smooth and matte. On a wooden surface, slightly walk the eye.

If the closet is lacquered, then it needs to be cleaned from varnish. This will help sander, Second version - sandpaper and physical effort. In conclusion, remove the dust with a wet cloth and dry.

We look at the subject of defects. If there are chips, damage, cracks - smear the twin. After drying, skin sandpaper and soil. The cabinet is ready for sticking.

Sticking wallpaper

Sticking Process - the final stage And the most responsible, the appearance of the updated cabinet depends on the quality of sticking. The work consists of several stages.

1. Remove the froze the selected item.
2. We carry on the canvas, make the pattern or cut off the desired length.
3. We smear the resulting segments with glue and apply to the selected part. If the basis of the wallpaper is fliseline, then the glue is applied to the closet surface.
4. For fixation, use a dry rag or roller.
5. After drying, the next day, install accessories.

When using the wallpaper glue, add a little PVA to it (per 1 liter of art. Spoon). During drying, do not make drafts, with open windows Wallpaper crackle or disperse on the seams.

Budget restoration of products

You can turn the old furniture to a new one without special investments. Desire, fantasy, skill and knowledge of several ways of budget restoration. About sticking with wallpaper you already know, there are other techniques, you can

• cloth
• paint
• true artificial leather
• apply the decoupage technique,
• stick pictures
• use painting on glass
• decorative plaster
• convenient option - self-adhesive and stained glass film.

These methods are suitable not only for a wardrobe, they are used for chest of drawers, bedside tables, bonders, kitchen cabinets, shells, servants, for furniture located in the corridor, hallway.

Furniture, decorated by wallpaper Or having a decoupage, tissue surface should be placed in dry rooms. On the unheated dacha, the coating can spoil from excessive humidity.

Application of volumetric drawings

Restoration can be with the effect of the volume image. This is not 3D pictures, but stencil painting and decorative plaster. Today, this method in fashion is often used in the interiors, to create decor elements, wall paintings.

Painted / plastered surface is not afraid of moisture and protects furniture from negative influences. Can be used in the bathroom, toilet, in country houses.

For work, no expensive materials are needed. Square meter decorative plaster Will cost 300 rubles.

At the same time there is a huge range of colors and effects: suede, mosaic, velvet, provence, marble, rustic, milling cutter, etc. internal work Take the silicone and rubber, they do not give cracks.

Decorative plaster

For drawing, you will need stencil, paint, spatula, brush, furniture varnish. The actions algorithm consists of 10 points:

1. Removes accessories.
2. We consider the coverage.
3. In the presence of cracks, we eliminate them with putty.
4. We pass by sandpaper.
5. Fix painted scotch stencil.
6. We break the plaster and apply it to the spatula.
7. After partial burrow, remove the stencil.
8. The injured contour corrected the knife. We leave for complete drying.
9. The next day, grinding fine-grained n / paper.
10. Apply paint.

A good effect gives furniture varnish. After applying paints become saturated, the product longer retains the updated view.

Stencil drawing

The plaster is effectively, but requires great effort, it is easier to work with paint. Under the stencil you create a masterpiece much faster. Here are some tips for staining the furniture:

• The drawing will last longer, if the surface is cleaned from old paint., dust and fat spots.
• On a white background, the pattern will be more contrasting. To do this, the product is painted in white, and then stencils.
• Additional beauty make gold / silver handles, accessories.
• The screen image is preferably carried out with the help of aerosol cartridges.
• The base background can coincide with the walls of the walls, and the drawing is made in contrast.

Polished furniture coloring

Chipboard natural treehaving an arranged polished application, you can paint. To do this, use matte acrylic paints. From the surface, you should remove the top layer (coarser-grained skin), chips / cracks to sharpen, and degrease the White Spirit.

Paint is applied in 2-3 reception. Each layer after drying is polished with shallow sandpaper. At the end of the work, if you wish to get an exclusive, the facade will be done. pickup. Thin marker notice the drawing and fill acrylic paint (Tassel used).

How to update kitchen cabinets

The kitchen is different from the room with a microclimate. Here often arises pairs, moisture, the furniture is subjected to aggressive temperatures, fat evaporation. Kitchen furnitureIn such conditions, the primordination is faster, you require washing or restoration.

Refresh kitchen cabinets can be painted, self-taking film or rathana. Paint should be taken moisture-resistant acrylic or alkyd enamel, oil paint. These compositions have good coating and give a glossy shine.

Before working, the door is removed from the loops if the coupe is dismantled, cleared, degreased. The roller is applied primer.

Start dyeing from the edge and reverse side of the doors. It will be necessary to create two layers. The first tassel, the second painting pad or roller. If the color saturation does not satisfy you - Kraft for the third time.

In this way, not only kitchen cabinets can be painted, but also room furniture (bedside tables, dressers, compilation).

When staining in several layers, the coating must dry, see the instructions on the bank. New fittings are bought for an updated cabinet, moldings, religions.

To update the furniture, you can use the tips of the designers:

• The wardrobe in the children's room is bright, using children's pictures performed by point painting.
• Glass / Mirror Doors Wardrobe Couple Decorate vinyl stickers or stained glass film.
• Chiffonier transform artificial formation, decoupage.
• The ancient servant is painted in white and apply a contrast pattern. Decorative plaster is appropriate.
• The cabinet in the living room can be done unique with the help of collage from family photos.
• On large doors, photo wallpapers are perfect.

Before staining, on wooden facades You can cut the cutter and other decorative elements.

Output

Now you know how to save the budget and renovating the old furniture. Applying any way, you will create a new colorful object in the interior.

In the video presented in this article you will find additional information on this topic. In the comments, share the restoration experience.

June 15, 2018.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!