Perforated tool panels. Storing the instrument in the garage with your own hands: how to do it rationally and convenient? Processing and painting of the finished product

The perforated tool panel is a metal sheet of flat shape with through spacers of a certain size and shape. In car service, service station, workshops, garages and industrial premises is used to organize instrument, equipment, consumables. In addition, it can be used for the manufacture of mobile and stationary exhibition stands for the sale of spare parts and consumables. As a rule, perforated panels are used with RG perforation type - with round holes located straight rows without displacement relative to each other's center.

Panels with perforation in the catalog "Automaster"

Online store "Automaster" offers to buy a perforated screen for the workbench of the desired size - from 1 to 2 meters in length. The goods are made of durable steel and covered with powder paint protecting metal from corrosion. Perfopanel can be fixed directly to the wall or to the workbench on special racks and brackets.

Wall pepopanel for storage is suitable for accommodating the most diverse inventory. For this, there is a whole system of fixtures and holders on the stand:

• magnetic plates;
• trays for hardware and small tools;
• hooks and grips for suspension of power tools, screwdrivers, hammers, keys and other devices;
• shelves;
• baskets.

Advantages of Perfopanels

Metal perforated leaf with hooks helps:

• streamline tools and equipment;
• it is convenient to place goods;
• rational use space and save space;
• provide prompt masters access to the desired device or material;
• organize storage of spare parts, consumables, other material values.

Our catalog contains only professional goods from advanced manufacturers at competitive prices. Choose the necessary tools and equipment and order directly from the site or come to our company store "Automaster". It is conveniently located in Moscow. Here you can personally make sure the quality of goods, choose everything you need to organize the auto repair business.

You can get acquired goods yourself in our corporate store (Moscow, Moscow Ring Road, 78 km, shopping center Dexter, 2nd floor) or order delivery in Moscow, sending a cargo to the regions of Russia.

Installation of instrumental grille

The perforated shield can be installed on a plumbing workbench or fasten to the wall with self-draws. Especially for this, its dimensions correspond to the length of the reversal single-channel and dual bulb models. The screen is attached to the table with special racks and brackets. It is possible to install one or two panels. Cutouts on the panel flapping are made in such a way that it can be hung horizontally and vertically, which helps to optimally fill the area, bypassing the available communications and relief.
Installation of the lattice on the wall is quite simple. On the back there are 4 curly cuts. 4 screws are screwed, and then the panel hangs on them as wall clock. You can make marking before drilling with any subtle sharp nail or sewing from the front side.

Mounting tool on the shield

The hole of the holes is 15 mm. This allows you to most fully fill the shield with a necessary tool. The distance between the cocoic fastening centers is equal to 30mm. The diameter of the holes of the perforated screen - 5mm. For screwdrivers, grippers, and other small items, are provided. Metal perforated Ferrum Panel (Ferrum) is produced from high strength steel with a thickness of 1.2 mm, which allows you to place a heavy tool.
The perforated screen is painted with a polymer coating that is immune to the temperature differences and the effects of aggressive substances.

Perforation loads

If the metal perforation is installed on the brackets on the workbench, the distributed load is 100 kg.

A variety of thematic forums on the Internet are trying to the reports, how to better store the tool using the perforated panel. With us your desire will be a reality. We will help solve specific tasks

In the garage box constantly lacks the place not only under the storage of unnecessary things, but also for the equipment you used to enjoy on an ongoing basis. The manufactured shield and stand for the instrument in the garage with your own hands will allow you to quickly organize the order in the room and save all items in the right places. We will analyze each other options.

Tool stand in the garage

A stand from any material will be a convenient way to secure equipment on the wall in the garage box. Most importantly, it is necessary to understand that on such a panel will not be able to place heavy spare parts and tools. But it is ideal for storing small items that you want to constantly have at hand. Moreover, make a stand for keys in the garage with your own hands any of the owners of garage boxes from girlfriend.

Now all the designs of the stands are divided into the following types:

• Horizontal stands,
• Vertical panels,
• Inclined designs.

Standard vertical stands are recognized as the most convenient owners of garages. With their help, you can provide a device tool on the wall in a personal garage right above the workbench and the workplace.

Toolbar in the garage

In order to build a tool panel, you do not need to possess professional skills. This task is easily solved by purchasing perforated panels (tin or HDF) or econpalary (frame from MDF with a groove throughout the perimeter of the product).

Since we are talking about the independent making options for fastening the instrument in the garage, we will analyze the option of making a panel of a MDF or plywood sheet. Here, first of all, you need to measure the place above the workbench and determine the size of the product itself. Then lay out a piece of plywood on the floor and lay out all that you need to put on the selected panel. The last step is the drilling of holes in the selected places of fastening and fixing equipment with screws. As a result, the professional panel with instruments in the garage are made quickly and simply - it remains only to place on the wall indoors.

It's important to know! Often, hooks without tight fixation are installed on the panel from the instrument board in the garage. At the garages owners, it causes many questions, because to consolidate any things on them difficult. You can use only hooks on the wall for junk in the garage.

Shield for tool in the garage with your own hands

The garage shield is another simple way to lay all the desired equipment in the room. If you want to place on the shield only a few sets of keys or nozzles, you will need to cut 2 plywood sheets that will become a framework frame. Place the entire tool is best at a distance of 3-4 centimeters between each other so that it is easy to get all the joinery equipment.

Deciding with the end-size frame, you need to make auxiliary options for holders. Their width must be not more than 5-7 centimeters. The next step is that the holders need to make marking on the standard dimensions of the instrument handle. It remains only to cut the corresponding cells and consolidate the holders horizontally to the frame.

This is the most convenient and simple variants of the instrument device in the garage. On this topic, watch the video below.

Reading time: 6 min.

In the garage or workshop there are many different tools, inventory. If you do not think about the storage system, then find the right item is not so simple. To bring the perfect order in the garage and save time spent in search of a specific tool, you need all the necessary items to assemble in one convenient zone. For this purpose, the system of fastening the tool on the wall is perfect. Due to this location of the tools in the room is broken, the useful area is released. All the necessary devices are placed in positive.

Top best tool storage ideas

Since the tools are long and short, large and small, different in shape, then the methods of their storage differ. There are several techniques for systematizing tools. Below are the most convenient and popular of those that can be made with your own hands right on the wall.

Vertical Storage Systems Shelving

One of the varieties of vertical storage of tools is the system in the form of racks. On racks, you should position the most necessary tools that can be placed in the near availability. The items that are required less often are removed to long racks on top or bottom shelves. Metal shelves for the garage - IF system - perfect for this suitable.

By type of installation, racks can be:

• stationary and collapsible;
• rotating or mobile;
• mounted, nominated.

But even with a large choice of options, the proposal will not always be satisfied with the necessary demands of the garage owner. Therefore, it is recommended to combine purchased racks with holders and shelves made with your own hands, or completely construct an independently wall storage system.

Very comfortable vertical homemade shelves made of wood with slots for storing wrench keys, screwdrivers. You can easily place the transition bushings for fastening a tool with a conical shank of different sizes or passatages.

A vertical rack in the form of a mobile stand is a great choice for placing a girlish tool. It is recommended to do from wood or plywood. Separate groups of tools are located on hooks, magnets or shelves. Frequently used for vertical storage system Special perforations.

Magnetic tape

Magnetic tape is simple and easy to use. Magnetic stripes are taken for fastening the tool and mounted on a wall storage system. You can attach the most different tool on the tape: from small metal wrenches and screwdrivers to large items.

Plastic containers

You can easily organize the storage of even the smallest items, collecting the system from small containers. They can be stored:

• small details, drills to a drill;
• nails, nuts and screws, screws;
• buttons, clamps and more.

The most affordable way is plastic bottles of different sizes or plastic containers, as well as small glass jars. Capacities can be placed on the vertical system on the shelves or attach straight to the wall to save space.

Plastic opaque cans with sliced \u200b\u200btops are also suitable. If you wish, they can be signed or numbered.

Organizers

To store small parts and items, it is easy to construct your own organizer:

1. Take any box from the old unnecessary table and make inside it from cardboard or plywood a lot of small partitions. Thanks to individual cells, all small necessary parts will always be in their place, sorted by configuration.
2. If you do the organizer yourself, then you need to take a piece of polystyrene - it will be the bottom of the organiser, and for the walls and partitions - PVC (glue with glue to the bottom), a transparent plastic or glass can be used for the lid.
3. Simply and quickly, you can make a screwdriver organizer. It can be done according to the instructions, as in paragraph 1 or 2. And you can drill in a bar from a tree or foam of the holes of the desired diameters, then attach it to the wall and paste into the screwdriver holes. All items will be in sight and are not lost.
4. Another option of the organizer is collected from tin cans of different values. Milking quickly and firmly attached to the vertical wall in any convenient position and filled with or small parts, or tools.

Rack for garden tool

Garden tool always takes a lot of space, climbs the passages. This can be avoided if you choose one of the walls of the garage or workshop and convert it to storing garden inventory. It is recommended to use conventional PVC pipes to create a storage system, make holders from them to garden inventory and other things:

• shovel, buckets, robel;
• bicycle;
• ski and ski sticks, skews, skates.

There are very simple options for fastening the tool in the garage:

1. Racks for gardening inventory. They are made from ordinary wooden pallets. It is leaning the bottom to the wall and fixed with self-drawing, to the siblings nourish any sizes of the rail.
2. Another simple way is the usual strong and reliable wooden or metal hooks throughout the wall, where you can spend the inventory, extension cords of different sizes. The strongest brackets and shelves can be used to store wheels, tires, inflatable boat.

Storage of garden and working equipment and other things with the help of a wall system and racks are featured and enjoys popular.

Technology for creating a wooden shelving for the instrument in the garage with your own hands

Before creating a storage rack with your own hands, you need to decide on the total number of tools that must be placed.

The tool must be placed on a vertical stand in a safe position.

Project creation

In order for the wall system to be comfortable, make up a plan-drawing of the future design on paper, where all requirements for the system are taken into account:

• Calculated the height and width of the shelving - it is better to use the entire wall from the bottom to the top.
• The recommended depth of niches for the rack is up to 65 cm, and the width between the vertical supports of the shelves is up to 1 m.
• Determine the required amount of shelves, including how much the shelves of holders with the tool climb.
• Below are outdoor spacious shelves and racks for tires, wheels and for a large joinery tool.
• Place places for magnetic tapes, hooks, holders.
• Calculated how much organizers and containers are required, what sizes, and also determine their location.
• Sort the tool and all small fasteners and storage items.

Required tool

For the manufacture of the shelving prepare tools:

• measuring roulette, square, level;
• saw, grinder;
• fasteners;
• hammer, drill.

Preparation of material

All necessary material for creating a shelving is prepared, according to the draft:

• For the main panel of the holder, you can use perfopopanel.
• If the rack is made of wood, it is recommended to purchase a lumber from oak or pine without cracks, bitch.
• Wooden boards with a thickness of up to 2.5 cm will be required for shelves.
• Shelves can be made from plywood ordinary and laminated.
• Vertical frame racks make 10 × 10 cm timber.
• Wooden boards are preliminarily recommended to be treated with mold and fungus, paint.
• For the assembly of a metal frame, a rectangular profile and corners are required (up to 2 cm).

Production of components

The procedure for making the rack and components is as follows:

1. According to the specified dimensions, vertical racks made of timber and boards or plywood on the shelves are cut, perfopopanell prepare. Wire places for shelves.
2. For the manufacture of a metal frame, the grinding of the desired height is cut and planned the location of the shelves. Collect frame with fasteners, corners. Apply primer, then cover the details of anti-corrosion paint.
3. Shelves are collected from the boards. They are tightly pressed to each other and cleaned with nails or self-drawing.
4. Shelves made of boards collect, laying elements across the frame, so they can withstand a lot of weight. If the shelves are assembled, laying boards along the frame, that is, the probability that they will be fed under the weight of the tools.
5. The design is assembled using self-tapping screws, nails and glue for wood.
6. The joints of all parts are additionally strengthened with metal corners.
7. The whole design is installed to the wall and is fixed with metal brackets.
8. Separately manufactured in the required quantity of shelves with pressure, holders, magnetic ribbons, racks, containers and organizers.
9. It may take a small desktop with vice from wooden boards. It can be attached to the wall system in the form of a stationary or hinged surface on metal or wooden holders.

Assembly

First, the framework of the rack is going, then wooden shelves are attached to it with self-draws. Rack shelves are filled with retractable baskets, organizers, containers and other holders. Hooks, magnets and magnetic tapes are attached to the perfopopanel. They host tools. For convenient fixing of pliers on the perfopopanel, the mount in the form of a crossbar is installed. Containers are filled with small fastening elements, tool. Garden inventory, bicycles, tires and wheels, skis, skates and sledges hang on holders or racks, or placed in containers.

Processing and painting of the finished product

The finished rack is once again treated from mold, the ends are crushed into several layers of paint. Containers and organizers can be painted in the same color as the shelving itself.

Most often, the workshop or garage look not in the best way due to litters. But thanks to the creation of a wall-mounted system for storing tools in the form of racks, all the necessary necessary items, fasteners, inventory will be literately sorted and posted. The room will acquire a neat look, and all work can be performed quickly and without delay.

Maintaining order in the workshop is not just a good habit. Carefully decomposing tools in places, the Master will extend their service life, and will also reduce the traumatic safety in the workplace. Organizers for tools will help forget about litterness and century-old dust. Such adaptations are sold in stores, and if you wish, you can make it easily.

Classification and destination

Organizers for tools differ in design, appointment, mobility (are portable or stationary). Experienced masters recommend combining different types of organizers when organizing the workspace. Allocate:

• Portable organizers;
• Compact stands;
• Cabinets with drawers-containers, including mobile (on wheels);
• Hinged organizers;
• Wall panels.

All of them are used to accommodate cutters, rolled, nozzles, manual tools, as well as electrical, hydraulic and electro-hydraulic equipment. Made from fabric (for bags), wood, metal, plastic, fiberglass, textolite. The designs allow the presence of magnets, rollers, moving elements. The use of organizers pursues the achievement of three main goals:

1. Optimization of the workspace;
2. Relief (acceleration) of work;
3. Simplify transportation.

Hinged structures

Suitable for any room with walls: workshops, garages, loggias, balconies. Wall-mounted tools for tools include panels placed along the walls and employees for fastening equipment, as well as separate devices suspended on hooks, magnets or self-tapping screws.

Hinged equipment fully transfers the load on the wall. Therefore, before proceeding with the installation, it should be verified in a sufficient carrier capacity of the wall material. This primarily concerns ceramic bricks, low-density porous concrete.

The easiest is the organizer to make an ordinary wooden board, nailed by a wide face to the wall. In the front side of the board, well-bent thin nails, which serve as locks for tools are clogged. Such execution is suitable for accommodating a small hand tool. The main thing is to pick up the diameter of the dowels and the thickness of the board so that they can withstand the payload.

In the finished variants, the role of retainers perform powerful magnets located along the entire length of the rail. Magnets are allowed to install on homemade canopies. They will be useful both in the main and auxiliary fasteners. Revolving the grooves for installation is not necessary, you can attract a magnet to epoxy glue.

Wall panels are more versatile due to the large area of \u200b\u200bthe working surface. They are made of metal, wood, plywood, textolite or plastic. The surface can be either perforated or solid. Perfopanels are widely represented in construction stores, with them there are often special attached cats. Universality is achieved through a fixed step of holes and removable mounts.

Whole panels are more often going with their own hands. They are easy to operate and install - the fundamental differences from the installation of the organizer-board are not. However, large-sized organizers, especially at a low thickness of the material, it is recommended to mount on the wall through the guides (boards, rails). This principle is also fair for perfopopanels.

To create an organiser from metal, a sheet of thickness of at least 1 millimeter will be required. At the same time buy sheet steel not necessarily. The basis may be a lifting of the failed appliance: a washing or dishwasher, a gas furnace, microwave. It has sufficient thickness, and, as a rule, covered with high-quality enamel.

Facing straightforwards in the locations of the beggars, forming a single plane. Mounting planks are arranged around the edges in the form of wooden boards, fixed on the ends of self-draws. Helve the panel on the wall will be for these guides. If necessary, you can add an additional board in the center, as well as vertical elements. This will not give a steel sheet freely "walk" while driving holes and during operation.

On the front side there are holes. The step will be the greater the greater the size of the equipment that is planned to be placed on the organizer. Holes can be located both in a cell and in a checker order. The recommended grid step in which the home-made organizer will be compatible with most of the finished hinged holders, is 25 millimeters. For drilling holes, the speed drill is best for drilling: it is well suited for a fine metal, does not leave burrs, but it is afraid of the distillation, so before working the panel is better to learn better.

It is allowed to combine perforation with solid areas. The central part of the metal perfopopanels is discharged to magnetic fasteners, on which the smallest is held: the bits of the screwdriver, small swells, nozzles, scissors, noodles. In the design, neodymium magnets of broken rigid disks are used.

The remaining free space is suitable for the role of an improvised board for the image of the schemes and drawings. On perforated areas, small organizers will easily fit, it is enough to provide them with reliable fastening. Mounted holders can be made of bent wires using point welding.

Wardrobe for instruments

Service cabinets occupy a large area than wall panels. Externally, they are not much different from ordinary furniture: cabinets or boxes. The principle of opening, organization of internal space, as well as execution materials can be radically different from different models. There are stationary, mobile (on wheels) or suspended.

Such organizers are safe wall mounted, since all sharp and heavy items are behind closed doors. In service cabinets you can store anything: Small parts to heavy electrical equipment, as well as absolutely outsiders (dishes, clothes, medicines). The inner space allows additional containers, retractable elements, magnetic fasteners.

Compact organizers

Ideal for accommodating a small tool, rolled, bits screwdriver, nozzles. There are open (rail, stands) or closed (boxes, suitcases), portable or stationary. These devices are used separately or together with cabinets or wall organizers.

In stores most widely represented sliding plastic boxes with special compartments under fasteners. It is possible to make an analogue of such containers independently, however, the product will be more harder. An independent manufacture is easier to stand stand, stands, pencils for rolling and nozzles.

Stand for turning

A large amount of dumping is conveniently stored on a specialized stand. You can assemble such a device yourself. Stand from cork tree light and neat look. Neither a single nail will be needed, all compounds are performed on glue. For work it will be necessary:

On a computer on a scale of 1: 1, the wall templates are drawn, print them on paper, cut out and applied to wood sheets. Place the contour on the details, mark the places of grooves. Cut with a knife, while the power of pressing should not be too large, otherwise the material crumples. On the top of the edge, the holes are planned, pushing them with a small diverse or seer. The hole diameter must correspond to the diameter of the tool.

Before gluing, the details are treated with sandpaper, removing the traces of the pencil, irregularity, jar. Clean surfaces from dust. The glue is applied to all surfaces of the contact, the surplus is removed immediately. The billet is fixed in the correct position and left for 24 hours. After drying, the glue surface is once again aligned, and then covered with varnish. For dried varnish, if necessary, apply signatures to each instrument.

What to keep rolled

The easiest is the organizer for rolling from the usual way. It is enough to drill the openings of the corresponding diameter and depth. Improvised stand can be complicated by making it a multi-levelBy adding signatures or attachments on whole areas. If you do not want to place the roller vertically, the grooves are performed instead of holes. The thickness of the grooves is selected by the diameter of the plated incisors. This storage method is better suitable for low-altitude drawers.

Organizers for dried easily make portable, it is enough to find a suitable case: a box from an old first aid kit, a case from a video tape. It is only necessary to reliably fix the holder inside the box in such a way that nothing falls out and not thunder.

Separately, it is worth mentioning about tissue (leather) organizers and polarms. They are suitable not only for storage rolled, but also for a full-fledged hand tool. The cheapest on the market are mobile, universal, but durability leaves much to be desired. Suitable for cars, hiking conditions.