From time to time everyone wants to update your home, make repairs, replace the doors. Although the last item is not entirely obligatory. You can simply limit them with painting. This process is quite simple if when choosing paint and method of staining to take into account the material on the basis of which the door is made and the duration of its operation.
Features Painting Doors "Canadian"
Laminated door
A distinctive feature of laminated doors is a smooth surface. The layer of paint lies easily, but, unfortunately, it keeps not very long.
- To solve this problem, the first step should be to remove the lacquer and impregnation of the upper layer. To this end, you can use grinding machine and zero sandpaper. It is also necessary to remember that under protective layer The chipboard is located: with deep processing, it begins to eat easily.
- The treated surface is cleaned with solvent.
- It is applied with a mixture of primer with an antiseptic.
- After the solid grazing of this protective layer, you can proceed to apply the first layer of paint.
- For such a work, you can choose any composition, because as a result of grinding, a common wood-chip plate is obtained, for the processing of which all colors are suitable. Application is performed using kraskopultum or velor roller.
- Waving to dry the first layer, the whole process should be repeated from the very beginning.
- A day later, a layer of transparent varnish is applied: it will protect the surface during its operation.
Iron door painting
This work refers to the category of the most problematic, since iron doors are the most complex in terms of paint. Therefore, the choice of the coloring makeup should be considered responsibly. Interior paints in this case will not fit - they unsuccessfully fall on the iron surface. More suitable option are pentafthalic (PF) compositions. They are made specifically for staining iron and wooden surfaces. The minus PF compositions is excessive simplicity represented color Gamma., no shine. But when applied to the iron surface, you can be confident in the full painting of the door.
Before applying paints, it is desirable to cover the door with a layer of primer in the tone. Through this reception you can achieve best coating Surfaces: The paint puts the paint much better than iron. Use when operating a pulverizer greatly simplifies the whole process.
Metal doors
Painting greatly improves appearance Metal doors.
- Before starting work, the door surface must be carefully cleaned, using a sponge impregnated with gasoline or solvent. If there are rust on the surface, it can be removed using a special composition based on a mixture of chromium salt with zinc.
- Removal of welding seams can be made using a metal brush or a special file.
- After that, the door surface is covered with primer: it will slow down the corrosion process and will contribute to the best adhesion of paint with the treated surface.
- Optimal choice for staining metal structures There are three types of paints: acrylic, enamel and pentafthaled. To work, a spray canter or a special tassel.
- In the case of a smooth surface total area Doors should be divided into small squares and start the process of staining from the left upper angle. In this case, three-layer paint applies.
- When processing relief surface The process of staining begins with the inner part towards the external one.
Veneered doors
Veneer refers to rather demanding materials. First of all, it should be resolved about whether to preserve wooden array Or repaint the door completely in another color.
- If there are small scratches and other defects, it can be limited to a simple varnishing, after which it is thoroughly rubbed the door surface with a polyrolon.
- In the case when a complete change in the color of the design is required, it is necessary to provide for additional work.
- All irregularities are eliminated by applying special primer.
- Most suitable paints For veneered door surfaces are water, polyurethane or glyphthalic paints. Optimal option are water paints.
- In this case, the use of nitrocrays is inappropriate because they deteriorate under the influence of moisture and a short time covered in many matte paints.
- Painting can be started after a complete drying of the primer layer.
The process of painting doors from MDF
For staining these doors most suitable selection There are compounds that contain varnish and tone. Application of such paint helps to preserve the structure of the door and attaching the surface of aesthetic appearance. For such work, the lackers is perfect for such a job, or, as it is also called, Morilka-varnish. It is made of nitrocellulose, solvents of organic origin and auxiliary components of color varnish. The main advantages of the substance:
- perfectly fills the substrate;
- due to the liquid consistency, deeply penetrates the pores of the material;
- differs high adhesion to the surface and a short period of drying.
- contains special pigments creating a barrier that guarantees excellent light-resistance;
- it has increased water repellent properties.
Combining in the same composition of varnish and tone allows you to first take tinting the door, then varnish.
The presence of a certain filient pattern complicates the task uniform application varnish. Therefore, it is desirable to engage in such work in the presence of a certain professional experience. When using the tassel, there is no need for some special skills. All that is required is to show accuracy and in the formation of small swaps, immediately delete them.
To prepare the surface under further painting it is necessary to eliminate extra particles, proteins from the canvas wet cloth or washcloth
Staining of the panel doors
Currently, two ways of coloring such doors are the most common.
- The essence of the first lies in the fact that the paint is first applied to the door ends. After that, a neat stripping of damaged sections of the cloth and thoroughly apply a new layer of primer is made. After its complete drying, you can start painting. Optimal is a two-layer paint appliance. When applied to the surface of the simulation or varnish, it is necessary to strictly follow the manufacturer's instructions. Application this method Most suitable when processing doors with a smooth surface.
- The second method is the toning of door cloths. Its use is convenient in the case when the surface has a texture of the tree. To mask flaws on wooden surface It is recommended to use a white primer, made on the basis of the shellac. For creating color Tint You can use the Morilka.
When painting the surface, regardless of the material it is necessary to use brushes or tissues of extremely high quality.
Protsed doors
This option is the easiest. The door canvas is fully prepared for a further painting. All that is required is to prepare the paint and tools. For processing uneven surfaces The door pattern will need a brush, and the flat surfaces are processed by roller.
Special accuracy should be taken when painting doors with glass inserted into them. In this case, the edging of the glasses should be pre-sample using paper tape. Such a measure is necessary to prevent paints.
The old door no longer looks like before? You should not despair, it can be easily restored with your own hands, without significant financial investments.
In this case, a simple staining of the surface is used, after which the view will be improved, you can also use a template that will give a conventional door wooden view. But before starting to paint the surface, you need to know which coloring material is suitable, then learn how to paint the doors under the tree.
Selecting paint
Based on what exactly will be done with the door, you must choose correctly than paint the door. In this case, there may be two methods of work:
Important! Choosing paint for painting doors, it is better to give preference acrylic composition on the water based. It is possible to use the mixture for applying a tassel, and on the consistency this mixture will be the most optimal. If wood is in the bath, then it is better to use an alkyd composition that can push water.
How to paint the door with your own hands (video)
Surface preparation
Fit the necessary materials for painting doors under the enamel tree, it will be necessary to make the surface preparation, after which the drawing of the structure of wooden fibers. It is always necessary to prepare the surface, removing the old age or varnish, using grinding or sandpaper.
For painting interior doors, a Canadian under the tree, as well as other species, must bring the surface to the perfect state. For this, the grinding or sandpaper is used, with a small or medium grain. If there are cracks, pits or other flaws, it is necessary to additionally put the surface, wood composition. This condition is mandatory, but using a transparent varnish, the color of the putty should be under the color of the tree itself. When the mixture is dry and hardens, it must be processed by sandpaper. After that, the preparation is over and can be moved to staining.
It is necessary to immediately note that the imitated wood pattern may apply almost any material. It can be a metal entrance, plastic or plastic, on steel canvas, etc. The main difference is to prepare the surface.
Door coloring
Staining the door is performed according to the following technology:
- A white dye for the canvas is used and the surface is completely painted.
- After that you need to cover the material with liquid soap. Before painting white door Under the tree with their own hands, you will need to leave the cloth for graze the base layer. As a rule, the drying period is indicated in the instructions.
- Next, you need to use a dark enamel and cover the surface to make curls, like woody fibers, while the liquid soap is washed off. Dissolved enamel after working dries and makes the desired drawing.
The interior passage from the real tree is expensive, so you need to consider the option of creating imitation on plywood. In this case, you will need an additional brush. With its help, "combing" a canvas for soft fibers. After that, it will be possible to paint the surface in any colors from white to dark. Next, the applied dye will spread and make the desired texture, which is reminding the real fiber.
For plywood, it is better to use several shades at once, as this will allow you to make the desired drawing. When enamel dry, plywood is grouhed. How to paint steel door Under the tree can be seen on the video, although airbrushing can be used.
In conclusion, according to the described information, it should be noted that the creation of the imitation of the wooden fiber allows to emphasize homemade. Regardless of different materials, general requirements Still, there is, the main rule - the choice suitable materials for work. For example, if you just need to emphasize the fibers of the real tree, it will be enough to use impregnations. When using varnish as an finishing material, a sampling is used, but not Olifu.
We still need to remember that many materials, perfectly absorb paints and varnishes, therefore, the surface treatment of 2-3 layers may be required. It is recommended to use "Alder" color for interior doors, excellent for him suitable door Canadian. If the interior is dark, then it is better to apply the color of "Wing".
Photo gallery of finished work
Now one of the budget versions of the door is the door of the Canadian. It is not expensive, compared to the wooden door, and the view has an impressive. Many in their apartments and homes are installed such doors. Yes, that's just sold in white tones covered with white soil. Therefore, after installation, this option doors need to paint. And how and how to paint the door Canadka, we will look at further.
Given that the Canadian door itself is not particularly durable, painting will not only give it a decent appearance, but also strengthens it. In addition, if you do not paint the door, then it is scratched with the time and covers the spots on the tone, than the coating itself, and in places where friction is most happened, the base of the door will begin to shift. The door itself is a tight pressed cardboard, so it can be stained.
What paint is suitable for painting Canada
Immediately divide paints by type of structure: glossy, matte and semiam
Glossy coating will emphasize all irregularities and flaws door canvas, so when the choice is worth glossy paint Better not to buy.
An excellent option for painting such doors will be a half-masted paint texture. She has some shine, but at the same time it will not allocate all irregularities. But when choosing, consider that each of the manufacturers allows different gloss. One is more, and others are less.
Matte paint is also well suited for dyeing of the Canadian, almost all flaws will hide under it, but at the same time it does not like everyone. Not many want to see in their house a matte door.
We select paint in composition
If you answer a question with one sentence than to paint the door Canadian, then let's say, it will be suitable for this, if it is a paint for a tree. An excellent choice will be the water-emulsion and acrylic paint that it is possible to compose. Oil coating on such a door looks not very beautiful. It is possible to apply varnish, only it should be matte.
Options Painting Door Canadian
Paint the door and the door frame of water-bearing latex or acrylic paintSimply applying it to the surface. Door box and platbands are neglected in advance. After painting, the texture of the door and the box will look equally.
Oil veil is applied to the door leaf, after some time the surplus is removed by a linen cloth. Where there will be more veils, wooden texture will be highlighted, resembling resembling natural tree. After the sampling is dry, the door canvas is covered with varnish. The door of the doors and platbands are processed by the same verse and vague. After this process, the Canadian door looks the same as the natural wooden door.
Pre-processing door before painting
Mostly Canadian doors do not require additional processing. It is enough to clean them from dust and dirt, and then you can start painting. Even small scratches Compare under coloring coating And they will not be noticeable. When there are large flaws on the surface, then these places are painted with a layer of paint, and after drying it, cleaned with shallow emery papercomparing the edges. After that, the door canvas is painted with a roller. And the embossed areas are scorched by a brush. If the paint is rare, then you should apply two coating layers.
How to paint the door Canadka
For painting, you can apply brush, roller or paintopult. If the door is painted in the prescribed state, it will not be able to paint the paintopult. Therefore, you have to apply a brush and roller. The canadian door is painted quite simple and such works can do each. Do not forget that defective areas should be painted and stained to the main staining.
Outcome
Now you know how to paint the door Canadka and whether it is possible to do it. If you have not heard about such interior doors, please pay attention to them. Canadian can become excellent budget option For repair in your apartment or house. The view of these doors is quite decent, and if desired, they can be made like natural wooden doors. In addition, building all embossed places with different color paint, you can generally transform the door leaf.
Among the many questions about mazonite doors, also called Canadian, the most frequent question about their coloring. In most cases, Canadian doors come and are sold in white, so in time there are inevitably dark places that require painting.
In addition to dark spots On Canadian doors also appear of different kind Scratches, and in the corners - rubbing, through which the basis of the door appears. All these defects do not give respect and sooner or later, an understanding comes that it is time to get rid of them.
Canadian doors refer to a budget door of the doors, have their advantages and disadvantages, among which the first place is low, the lowest strength of the external coating. What to expect OT. textual MDF.representing, in fact, pressed cardboard? But it is this coverage that makes the color of "Canadians" available to all - even the most unprepared people will be able to produce quite high-quality painting. Let's deal with how to do it.
What paint paint canadian doors
The budget segment of the door implies low build quality. It is not about the quality of gluing, materials used, ecology - in our case, the smoothness of the door canvase and the smooth of the joints of the frame, which are hidden under the MDF. Both both "lame".
All paints are divided into glossy, semi-man and matte. Glossy, shiny paint emphasizes all irregularities and surface defects. And even it would seem, quite smooth surface Maybe after applying glossy paint or varnish, take a not quite expected view. In the case of Canadian doors, the joints will be commenned door box And other irregularities that have not been noticeable before that. Of the foregoing, it follows the inevitable conclusion:
when painting Canadian doors it is undesirable to use
Glossy paint
The optimal result can give a unbelled paint with a slight reflections, but different manufacturers Gloss different and this moment must be taken into account. Matte paint will hide all irregularities in general, but many do not like the matte surface - it all depends on personal preferences.
Go further - what kind of paint is suitable for coloring Canadian doors? Majonite doors can be painted any paint for wood. Excellent result It gives waterproof waterway and paint on an acrylic basis. You can add a dye and get the desired tint. Had to see the doors painted oil paint - Honestly, it looks not very, although this is a subjective opinion. And once in the door shop, in which the author of these lines worked at one time, the party of veneered "canadas" covered with a glitter brilliant varnish was brought. They were sold with difficulty - as you understood, all the irregularities and joints were emphasized. Therefore, if you decide to use varnish, you need to use matte. It is worth such a varnish, though, more expensive than glossy.
If you expected to hear the specific names of the paints, please osiss - there are many good reviews on the use of Pinotex paint. This is expensive brand paint and with complete confidence it can be said that all the colors of this level will give a good result. Should I post money for such paints - to solve you. But believe me, sometimes there is no need for this - Canadian doors can be painted less expensive paint, the one that is in your region is enough to communicate with sellers and listen to their advice. It is necessary to take into account the covering ability of paint - it differs from different manufacturers and when using paints with weak shelterness, it may be necessary to paint into two layers, which will increase costs.
Do I need to handle Canadian doors
Special processing before painting "Canada" do not require. If there are no significant defects, painting can be started immediately, pre-cleaved the door from dust and dirt - standard requirements for any painting. It is advisable to try on little plot Apply a test layer of paint and make sure that everything is fine, the color and gloss are satisfied with you.
If the doors contain small scratches, then in 90 percent, they are perfectly hidden under the layer of paints and disguised as the texture of the doors. If the scratch acts on the surface of the door, then it can be painted, wait for the drying of the paint, walk the skin, having threw the edges with the surface of the canvas, and then make a complete color. Nothing new, in general, also standard actions.
What to paint canadian doors
And the last thing is to paint the doors. It is unlikely that you have a sprayer, so they remain standard options - Tassel made of natural pile and roller. The texture of the MDF, which hides the small disadvantages, together using paint without a glossy, will make it possible to quite well with the doors even with an inexperienced person, which has already been said at the beginning of the article. It is worth only to note that at first you need to paint the brush with defects, and then start painting the entire door as a whole.
During the period repair work In a large number of options, the doors can be replaced or their staining. In repair, the question always appears than to cover the peak of Canadian, for example, as the most normal option, or interior door from a different material.
And the most interesting thing is that a multifunctional response to this question No, but everything is phased.
Stock Foto Painted door, which is now definitely suitable for interior style
From material to color
In fact, staining the designs of the doors - the process is incredibly the usual and to mask it every completely without the skills of the painting.
You can immediately allocate that it is not dependent on the material, the door is constantly painted according to the specific rules:
- The system is obliged to be removed from the loops.
- With the canvases removed all the fittings.
- Other components like glass plug-in panels own hands Select film to protect.
- The coating that is already outdated must be removed, for this there are several options.
Veneer
Any type of material, from which is a collected canvas doors, there are own needs in staining. We begin with a veneer and consider how to cover the paint a veneered door if you consider that the veneer is a very substantive material.
Here it will be necessary to adhere to a specific step-by-step work:
- All small defects or irregularities of the array must be smeared with a specialized primer mixture.
- To the painted works proceed when the primer dries.
You can primarize the entire veneered array.
With regard to direct paint, the veneered material must be painted paint three types:
- Polyurethane.
- Based on water.
- Glyphthal enamel.
The main thing!
Nitrocraska is not suitable for applying, as it cannot tolerate moisture, and the reaction to humidity leads to the fact that the door canvas are covered with matte spots.
Laminated cloth
From the point of view of uniform rules, everything in the variant with laminate remains without change, but before you cover the paint laminated door, it will be necessary to spend some other work on the preparation:
- Laminate from the canvas is removed using shallow sandwich.
- The entire surface is stitched by circular motions until it is done by matte.
- Further applied primer layer.
- After driving dry, all flaws are covered with a specialized mixture, putting on a tree.
- All covered parts are polished and covered with a primer mixture again.
Shlacevka specialized composition
For paint coating, each of the proposed paints is suitable:
- Acrylic.
- Acrylate.
- Oil.
- Nitrocracy.
The main thing!
Any of the proposed methods must be well stirred in advance and much better with the help of a mixer, it will give the opportunity to avoid divorces.
The instruction implies that they bring paint with several layers, which can be applied with a roller or spray gun. And by the way, in another embodiment, not only highly professional skills of work are needed, but also suitable conditions Climate, in another case, the layer of paint will come out thick.
Organit
But the question is how to cover the paint door from the organity, constantly causes interest. And all because the DVP can absorb more than simple woodTherefore, before coloring, you must certainly apply a primer mixture or olif.
Without it, the consumption of material for staining can be more than 4 times, and the surface itself will be released anyway, the paint is differently covered. And to cover paint after the priming, oil, water-emulsion, alkyd and acrylic-based paints are perfectly suitable.
Orolete door in front of the color
The main thing!
When nanicing the olifa, it must be heated to a temperature at a minimum of 50 ° C, and apply only in 1 layer.
Doors of this kind can be in the bath, and in the premises, because they are available, simply and only one difficulty in staining. Since the Fiberboard plate is completely always with a microrelief, it is not easy to paint the roller or brush.
It takes a paintopult or a roller with a fur coat, you can even can only make the same layer through the entire plane of the organity. Under this type of plane, the ZINGA electrically conductive paint is definitely not suitable, which is designed to protect the metal, and leave its ability to carry out the current, but others, as stated above, will absolutely be perfectly perfect on the Fiberboard.
Canadian
Returning to the most common doors, which are referred to as "Canada", it is necessary to emphasize that alkyd dyes are perfect for them.
You can use the rest of the paints for finishing workBut not all suitable, individuals can peel. Also, for example, flame retardant paints for metal polystyl, or other non-standard materials, with all the desire, still need to be applied according to their own direct intended purpose.
Simple canvas-simple staining, in this and there is "Canada"
As a rule, it is possible to apply and lesing (transmitting light) compositions, they make it possible to refresh the surface of the Canadian and give it the appearance of a new product. True, it is necessary only if there is a skill.
You can use special formulations "under the wood", but according to anyone you need to first decide which appearance of the lined door is necessary after all works are completed, under the gloss, mat, continuous or structure.
Excellent on the surface of the canvas couple of layers
Regarding maternity The question is, the cost of work is obliged to be adequate, in the sense that it sometimes saves what sense. Another staining together with the dismantling of an ancient, not a good layer, the primer mixture and impregnation will cost more.
And therefore, the material is not chosen by rule "the cheaper - the better", and if we proceed from the comfort of the canvases and the dye.
Output
Staining the door of the door, as it was, the process is completely ordinary, but the selection of the material asks attention. On the other hand, a good approach to the selection of materials guarantees a good effect. And looking at the video in this note, you can resolve information about staining and choose the correct materials.