path of knowledge | |
Job Source | freya |
Reward | Miraak Equipment , Skill Tree Reset |
Previous | gardener people Cleansing stones |
Location | Apocrypha |
Complexity | Complex |
ID | DLC2MQ06 |
- Prying Orbs per eye symbol
- Gnashing Blades on Fang Glyph
- "Delving Pincers" on the pincer symbol
- Boneless Limbs per Tentacle Glyph
Run and soon you will see a pair of Guardians guarding the wall with the shout word Avatar of the Dragon. As soon as you learn the word, the dragon Sarotar will attack you. your task is to subdue the dragon to your will with the help of the "Submission of the will" cry. When the dragon is next to you, use the spell, and then click "use" on the dragon. This way you can ride the monster.
Fight with Miraak
The dragon obeys and will take you to Miraak. At the top of the Apocrypha, after a short dialogue with the first dragonborn, you will enter into battle with him. Miraak is a fairly strong opponent, but the difficulty of the battle is not so much in the strength of the enemy as in the bugs and errors of the battle scenario.If you do not have such problems, then your tactics are very simple: hit the enemy until his health drops to a critical value. Then Miraak will be saved in the black liquid of Hermaeus Mora, which for the time being will replenish the health of our enemy. However, at one point Hermus will get tired of it and he himself will finish him off with his black tentacle.
When victory is yours, you will be faced with the choice of resetting some abilities. You can override them by spending one dragon soul. After that, after reading the book, return to Solstheim, where Freya will be waiting for you.
Bugs
- Quite a popular bug when Miraak comes out during the battle and gets up in the black water, becoming invulnerable and immovable. You can revive it using the ResetHealth console command. (press ~ then click on Miraak and type ResetHealth). PS4 Solution: While Miraak talks about his upcoming plans, get on your dragon and fight from the air. To fix the target on Miraak, you need to press the triangle. Damage dealt a little bit, minimal. Since the dragon is also involved in the battle, its damage can be too harmful, so you need to be careful not to overdo it with damage. When Mirak needs to recover, he will seat our dragon, and Dovakin will fall from him. Miraak will restore his health, and we need to shout to tame the next dragon. Just like the first time, gently beat him. He will seat the second dragon, we will fall, he will absorb the soul, recover, and we will tame the third dragon. We act in exactly the same way as with the first two. When Miraak kills the third dragon, he will no longer have a supply of dragon strength and we just beat him to the end.
- If done correctly, Miraak will wake up and fight again.
- If the problem persists, try booting before you get off the first dragon. Sitting on the dragon, select Miraak and with the help of Ctrl beat him until he kills the dragon, then with the help of a shout of Subjugation of Will, tame the second dragon and perform the same actions, the same with the third.
- If the problem persists, try typing in the console setstage dlc2mq06 500 and then setstage dlc2mq06 580 thus the quest will be completed;
- Sometimes the background music of the battle after the fight with Miraak continues to play non-stop, use the command removemusic DLC2MUSCombatBoss
Surely everyone has heard of Winston Leonard Spencer-Churchill, the British politician who in 2002 (according to a BBS poll) was named the greatest Briton in history? Then you probably heard that Sir Winston Churchill is also known for his very sharp phrases, which have long been disassembled into quotes and which are enjoyed by both politicians and businessmen, as well as mere mortals. Below are just a few of those quotes...
0. Do not wish health and wealth, but wish good luck. After all, on the Titanic everyone was rich and healthy, but only a few were lucky.
1. Success is the ability to move from failure to failure without losing enthusiasm.
2. Hooking a beautiful woman is not an easy task, because she will not turn ugly from your words.
3. People are great at keeping secrets they don't know.
4. Good cognac is like a woman. Don't try to take it by storm. Pamper, warm it in your hands before putting your lips to it.
5. A diplomat is a person who thinks twice before saying nothing.
6. A fanatic is a person who cannot change his views and cannot change the subject.
7. We make a living by what we get and live by what we give.
8. It's better to make news than to talk about it.
9. Saving money is a good thing, especially if your parents have already done it.
10. A smart person does not make all the mistakes himself - he gives a chance to others.
11. A politician must be able to predict what will happen tomorrow, in a week, in a month and in a year. And then explain why it didn't happen.
12. I have always followed the rule: don't run if you can stand; don't stand if you can sit; don't sit if you can lie.
13. The reputation of a power is best determined by the amount it can borrow.
14. In my youth, I made it a rule not to drink a single drop of alcohol before dinner. Now that I am no longer young, I keep the rule not to drink a drop of alcohol before breakfast.
15. Success is not final. Defeat is not fatal. Only the courage to continue matters.
16. I am always ready to learn, but I don't always like being taught.
17. A strong, silent man is too often silent only because he has nothing to say.
18. Courage is what makes you stand up and speak your mind, and courage also makes you sit down and listen.
19. The greatest lesson of life is that sometimes fools are right.
20. I took more from alcohol than it took from me.
21. Always check quotes: your own - before you say, others - after they are said.
22. Mankind is like a ship in a storm. The compass is broken, the charts are outdated, the captain has been thrown overboard, and the sailors must take turns replacing him. Only every turn of the steering wheel must be coordinated not only with the crew, but also with the passengers, who are becoming more and more on the deck.
23. A big advantage is the one who has made mistakes before, on which you can learn.
24. The best way to stay consistent is to change with circumstances.
25. Disconnected from the truth, conscience is nothing more than stupidity, it deserves pity, but not respect.
26. Never give up - never, never, never, never, neither in big, nor in small, neither in large, nor in small, never give up, if it does not contradict honor and common sense. Never succumb to force, never succumb to the obviously superior power of your opponent.
27. You will never reach your destination if you stop at every barking dog to throw a stone at it.
28. Throughout his life, every person has to stumble over his own “great chance”. Only now the majority gets up, shakes himself off and goes on as if nothing had happened.
29. It is not enough to be able to use the situation, you need to be able to create it.
30. I love pigs. Dogs look up at us. Cats look down on us. Pigs look at us as equals.
31. If you want to achieve a goal, don't try to be subtle or smart. Use rough tricks. Hit the target right away. Come back and hit again. Then hit again, with the strongest blow from the shoulder.
32. Do you have enemies? Okay, so you've stood up for something in your life.
33. School has nothing to do with education. This is an institution of control where children are taught the skills of a hostel.
34. A pessimist sees difficulties in every opportunity, while an optimist sees an opportunity in every difficulty.
35. If you can start your day without caffeine, if you can always be cheerful and not pay attention to pain and discomfort, if you can keep from complaining and not bore people with your problems, if you can eat the same food every day and be thankful for it if you can understand a loved one when he does not have enough time for you, if you can ignore the accusations from a loved one when everything goes wrong through no fault of yours, if you can calmly take criticism if you can treat your poor friend as you would a rich one, if you can do without lying and cheating, if you can deal with stress without drugs, if you can relax without drinking, if you can sleep without pills, if you can sincerely say that you have no prejudice against skin color, religious beliefs, sexual orientation or politics - then you have reached the level of development of your dog ...
According to the Internet
Photo: www.slovenskenovice.si
19. Blade: surfaces, corners, edges. The role of the blade in the cutting process.
A blade is a wedge-shaped element of a cutting tool. It is designed to penetrate into the material of the workpiece and separate the cut layer.
The blade in cross section has the shape of a wedge. Its elements are the front surface, one or more back surfaces, cutting edges and corners.
In the cutting process, the main role is played by the cutting part of the cutter wedge - the blade. The blade geometry is understood as a set of characteristics of its shape and location in space. Blade 3 moves relative to the workpiece 4 (Fig. 1.1), forming chips 2. In the cutting part of the cutter wedge, the following elements can be distinguished: front surface BUT γ , in contact with the cut layer 1 and chips; rear surface BUT α , facing the cutting surface formed in the workpiece R n ; cutting edge 5 formed by the intersection of the front and rear surfaces. In more complex cases of semi-closed and closed cutting, cutting edges should be distinguished: main and auxiliary. Accordingly, the back surfaces are distinguished from the blade: the main one, adjacent to the main cutting edge, and the auxiliary ones, adjacent to the auxiliary cutting edges. The main edge is considered to be the cutting edge, which forms the larger side of the section of the cut layer. The secondary cutting edges form the smaller sides. The point of intersection of the main and auxiliary cutting edges is called the top of the blade.
Rice. 1.1. Blade geometry 1 – cut layer; 2 - chips; 3 - blade;
4 - blank; 5 - cutting edge
The front and back surfaces can be of any shape (concave, convex or broken line). The conjugation of the cutting edges can be done with a radius or a dot.
The position of the cutting edges and blade surfaces in space determines the angular parameters of the cutting process. To determine the angles, the initial coordinate planes are established: the main plane and the cutting plane (Fig. 1.1).
Main plane P v − coordinate plane drawn through the considered point n cutting edge perpendicular to the direction of the velocity of the main v or resulting v e cutting motion at that point. cutting plane R n - coordinate plane tangent to the cutting edge at the point under consideration and perpendicular to the base plane P v .
Additional coordinate planes are the main and normal secant planes. Principal cutting plane R τ - coordinate plane perpendicular to the line of intersection of the main plane P v and cutting plane R n. Normal cutting plane R n - a plane perpendicular to the cutting edge at the point under consideration (in Fig. 1.1, the plane R τ and R n match).
20. Cutting angles in the presence of additional working movements and processing with a knife turned in the plan to the direction of the cutting speed.
Also select the work plane P s , in which the velocity vectors of the main cutting motion v and the feed motion are located v s (shown in Figure 1.2).
Rice. 1.2 - Position of the working plane P s during sawing
The angular cutting parameters are characterized by the main (with the main cutting edge) and auxiliary (with the auxiliary cutting edge) angles, the angle of inclination of the main cutting edge.
The following angles are distinguished (shown in Fig. 1.1 for the main cutting edge):
- γ - rake angle, angle in the cutting plane R τ between the front of the blade BUT γ and main plane P v ;
- α – back angle, angle in the cutting plane R τ between the back of the blade BUT α and cutting plane R P ;
- β – taper angle, angle in the cutting plane R τ between front BUTγ and back BUT α blade surfaces.
The sum of the rear angle a and the taper angle p is called the cutting angle δ:
There is a simple relationship between the principal angles:
α + β + γ = 90°.
" |