There were already those times when people could do in the house without amenities and arranged them on the street. Now it does not matter, this is a house outside the city or within the city or is an urban apartment, each dwelling today is equipped with a bathroom.
Planning the future house, a lot of attention is paid to these premises, because by making it right once, in the future you can only enjoy the visit to this room. When the bathroom layout is planned, it is necessary to rely on the size of the future room allocated for it.
In a private house, such a room can be done quite large so that it can be easily able to make a bath complex or a small SPA zone. It opens a huge selection of options and can be installed with the selection of style or the convenience of alignment of plumbing, as it likes to like the owners of the house.
For the bathroom did not deliver unforeseen hassle in the future, first of all, it is necessary to think about its location. If there are additional floors in the house, it is better to make a room of hygiene on each of them. It will be convenient to families with young children and if there are people with disabilities in the family.
It is better to have such a room closer to the kitchen, in which there is already a vent. This will help save on an additional discharge. Having arranged the bathroom on the upper floors, you need to provide such a place where it will not be above the residential premises.
It will be good to make a window in the room - this is an additional ventilation and saving light during the daytime. Planning the hygiene room is more convenient not from the front of the facade of the house, it is better if the window will go to the courtyard.
Basically, the bathroom planning is carried out on the basis of which plumbing will be installed in it, which will depend on it. Of course, room dimensions are a purely individual choice, but still, it must comply with the basic requirements and standards established for all residential buildings.
In essence, the arrangement of the room of hygiene in private homes is not much different from the arrangement in the city apartment, unless it is not necessary to consider centimeters of space to install furniture and plumbing.
But, in private households, you will have to think about summing up communications, water pipes and sewage arrangement. Be sure to think about the correct location of the engineering system, the supply of electricity of risers and ventilation. In the presence of appropriate qualifications, all these works can be made with your own hands, otherwise entrusting such responsible works to professionals.
In the indoor of hygiene, the center of attention is always a bath. It is usually installed tightly adjacent to the wall, but if possible square meters allow, it can be installed in the center on the podium or make it built into the floor. It will depend on the planning of the room and from its design.
What color to choose?
The choice of color palette will play its role in the design of the premises. To visually make the room spacious and volumetric, then shades should be light and air, you can add images of water or sky.
Beige and brown tones will make space visually slightly smaller, but will make the atmosphere warmer and more cozy.
Capture colors will help remove monotony, and one-standard materials can be diluted with contrasting inserts.
In addition to natural lighting from the window, the main top lighting will give the room a little space, and the backlight as point lamps will help to illuminate individual zones and give the room a little romanticity.
If you correctly plan the room, select the desired forms, the size, color palette and materials for its finishes, then you can get the result that will be very happy with warmth and comfort.
Bathroom Design in your home - Video
Bathroom in a private house photo gallery
Make a bathroom in a wooden house forces to any owner of country housing. Implement your plans for arrangement is quite forces to each person. Here we spend most of our lives. But to make it all better, it is necessary to make every effort and carefully examine the construction and finishing technology.
An important component of the elements when finishing the bathroom in a wooden house is a thorough thinking of design. Because how to qualitatively the project will be made, the state of not one room depends, and the entire country house. Properly laid sewage and drainage systems will not give moisture spread over the surfaces and the premises will be removed from possible deformation. In addition, the external interior and facilities of the bathroom are of great importance for all family members.
Properly selected interior, material and equipment will help embody the most bold ideas. Start the arrangement of the room in a wooden house is necessary with waterproofing. Because how correctly, the protection against moisture will be further exploitation.
Bathroom design can be labeled by putting pots with flowers across the room
The permanent humidity and temperature differences are able to destroy the composition of even the hardest wood, not to mention other materials. Therefore, it is desirable to prevent all the consequences of incorrect processing at the very beginning than to cope with the troubles after the completion of all work on arrangement.
Incorrectly installed waterproofing or its absence leads to infection with the fungus of all surfaces of the wooden house and the development of mold, which can go to other surfaces, and the finish itself will begin to quickly collapse.
Floor finishing in the bathroom is made of ceramic tiles
Modern bathroom design with backlit bath
Floor laying and its features
To protect surfaces from moisture, it is better to approach complex. A thorough multilayer installation will not only protect the surface from unwanted moisture, but also will help strengthen the floor design - it is necessary, because the equipment installed in the bathroom has more weight than ordinary furniture.
Accordingly, the bath will be filled with water, which means that the mass of the load will increase. Therefore, so carefully you need to think through the floor design device.
To prepare a reason for the future bathroom, we divide the space between the lags:
- First layer put a special waterproofing film. Distribute a mixture of gravel and sand and sink well. The height of the layer should be approximately 15-20 centimeters.
- Next layer to the height of the upper beams to put the clamzite, also thoroughly and fill with liquid concrete or cement. As a result, the semblance of a two-layer cake should be like. Wait until everything is dry and proceed to the next step.
- To the top parts of the beams, install the paneur with moisture-resistant composition and secure it. Choose a material with a thickness of about 15-50 mm. On the plywood layer, impose a waterproofing film and leave an additional intake of about 10-15 centimeters onto the walls to ensure protection from leakage in the side parts between the wall and the floor.
- For laid insulation, pour a special mixture intended for a floor screed. Pre-lay the beacons, after drying, you can delete and throw them away;
- For convenience, you can make a bias toward the wastewall or leave and connect the hole in the floor with the removed sewer. Additionally, equip the hole with a grid or a plug - it is necessary that small items do not fall into the holes, and the closed plug will become a barrier for unpleasant odors;
- The resulting screed is treated with a grinding machine and a waterproofing solution.
The choice of floor surface depends on the preferences of the owner. Many choose a tile, since the process of laying is not difficult and lay will not be difficult for an ordinary person. Alternative to the tiled surface can be moisture-resistant laminate or linoleum.
Wooden bathtub will be the main highlight of the interior of the bathroom
Bathroom design is made of light wood.
Floor finishing and shower made of mosaic tiles of different colors
|
Construction features When laying an additional top cover, consult professionals. They will help to install the floor quickly and efficiently. |
Interior solutions To give the house of its special style, you can arrange the bathroom with a tree. Larch, ox, tick look good. Installed and treated with anti-grab substances, the floor can also be put in mosaic or porcelain. It looks very beautifully the floor covering their adhesive tube with a layer of shiny varnish applied from above. |
Bathroom ventilation in a wooden house
Because how correctly the system will be installed, the functionality of the room and the temperature regime depends. Installing the output of the ventilation pipe is usually placed in the upper part of one of the angles of the wall and is displayed through the ventilation pipe to the outside. You can connect it to the air duct, and then the streams will go into the pipe on the attic or the roof.
For additional fresh air intake, you can install a fan. It will help to quickly dry the room.
In addition to establishing an exhaust system in a wooden house, you need to provide a fresh air flow. For this purpose, it is additionally installed a small gap between the outer threshold and the bottom of the door (approximately 15-20 mm). The incorrectly installed air-trap system can lead to the accumulation of condensate on all surfaces, as a result of which the material used in the finish begins to gradually deteriorate and swell, which leads to the appearance of fungi and bacteria.
Chandelier in the bathroom interior in a wooden house will create a special atmosphere
Ceiling and walls - choose the material
The finishing of surfaces fit into the interior of the bathroom in a wooden house, serve various models of panels and drywall. In terms of its qualities, they are not inferior to other materials, but look beautiful and cost much cheaper than tile or stretch tissue.
The lighting for the ceiling bathroom consists of several luminaires interconnected. They are mounted in the canvas attached to the base, and help evenly distribute the light rays indoors.
If the large size room can be hung as a chandelier in the central part and several sconces (small lamps) suspend separately in the place where the light does not penetrate. Such a design will give the bathroom comfort, heat and atmosphere of mystery.
Dark tree in combination of white color in the interior of the bathroom looks very beautiful
Bath made in the form of barrels
Wooden bathroom design with shower
For decoration of the walls, in addition to high-quality waterproofing, materials are suitable. They fit perfectly into the design of the room and create a single style. In addition to wooden panels, tiles are also widely used. This is a universal finishing material and it has long occupied the leading position among the coatings for the bathroom. The main qualities and advantages when using the tile is:
- durability;
- practicality;
- big choice;
- easy to use and care.
Install plumbing
Before you begin to install the equipment, make a preliminary room plan, in what places the plumbing will be located. If you can install the area in the middle of the room - it will look spectacular and beneficial in relation to another technique.
Such a location requires preliminary preparation for strengthening the design and capital strengthening. This is necessary in order to reduce increasing loads on the lags and beams.
Dark tree in the bathroom interior looks very unusual and beautiful
Tree in the interior of the bathroom harmoniously complement the design
If the floor has a normal base, the equipment should be positioned along the walls. Sinks Choose preferably medium sizes. If in the family more than three people set two models.
If the walls of the bathroom are decorated in a wooden style, can be separated by plumbing like a material. To do this, use special coatings with impregnating substances that protect finishing surfaces from moisture and fungus. If you set large baths on separate legs or jacuzzi in the middle of the room, which has an additional space, then they will look very impressive and stylish.
Bathroom design is designed in one color scheme
Floor finishing in the bathroom is made of ceramic tile
Porcelain tile in combination with wood looks very beautiful
How to choose furniture
In private houses, compared with an area of \u200b\u200bsmall-sized apartments, a bathroom metro station allows you to install plumbing equipment, as well as cabinets and open linen shelves. An open atmosphere allows you to make a beautifully folded various casual things:
- towels;
- home bathrobes;
- hair dryers;
- brushes;
- cosmetics;
- household chemistry.
Choosing furniture for design, pay attention to non-standard things. For young children, sustainable chairs or portable steps are suitable so that they can calmly get to the sink. Modern manufacturers offer a large selection of various models for the price and quality.
Flooring in the bathroom can be made of porcelain tiles
Wall decoration in the bathroom is made of ceramic tiles in combination with wood
The mirror is an important attribute in the bathroom. Traditionally, it is accepted to hang over the sink in a wooden house, but you can hang at will, where you want. It is set to full growth. It will make your interior sophisticated and emphasizes his individuality.
In addition, it is necessary to take care of trifles. The following details will fit well:
- ducts for storing various objects (household chemicals, detergents);
- hooks for clothes and bathrobes:
- shelves and racks for bath accessories;
- baskets for laundry linen;
- heated towel rail.
Make your stay comfortable and pleasant thoughtful little things and details.
Tree in the interior of the bathroom looks amazing
Bathroom design in a tree looks very beautiful
Very nice to combine wood and white color in the interior of the bathroom
Room decor styles
Country
Most often, country houses are drawn up in this olive style. Surface of walls, floor and ceilings - wooden. Windows (if available) with curtains with a pattern from a large cell or small colors. Bathrobes and towels are also kept in a single gamma. In addition, you can install the shelves of their dark wood, lay a wool rug and add a soap holder and toothbrushes, as well as other accessories on topics.
Classic
For such a style, light tones are characterized. The walls and the floor are usually drawn up with a cafeter, the ceiling is stretched. In such a design of the bathroom, the exquisite plumbing will fit perfectly. Furniture, bathroom facilities, linen are suitable light shade.
The walls of the bathroom are made of wood
Bathroom design is made of dark wood.
Ampire and Modern
For these styles, bathrooms are suitable with a large area and where it is possible to spend considerable money for equipment and materials. Here will be characterized by applying gilded parts of the accessories, sculptural models in the form of angels and nymph. Large mirrors, expensive chandeliers and landsrs. The bath is usually put in the central part on separate raised legs. For such a style, the combination of gold and white color is characteristic - similar design gives the design of the bathroom with a chic look.
Bathroom in a private house is an opportunity to create something more than what is usually found in the apartment. It can be equipped completely at wish, providing enough space for creativity and the inclusion of elements that would simply not fit in a close apartment.
Modern bathroom design in the house begins to fold on the design stages. Even before the construction of the house, you can choose the size of the room, focusing on the desired parameters.
Communications
In order to make a bathroom in a private house, you need to spend a lot of pipes through which the water will rise and leave. The complexity in installing communications for owners of their own homes is that everything needs to be done from scratch.
If apartments are enough to connect to already available systems, then in the house you need to lay a new plumbing and organize a drain system.
However, there are also its advantages, for example, when organizing their own well, the owner ceases to depend on housing and communal services, in terms of water.
In order to make a bathroom in a private house that has several floors, you need to purchase a powerful pumping station. She feeding from electricity will quickly raise water into the desired site.
In order for hot water in the crane, you need to select the system of its heating. If you choose a simple heating system, only hot water will appear in the house.
But if you make efforts and spend more money, you can combine heating and hot water, along the way, making heated floor in the bathroom.
Water dissolution
Without a competent system for removing water, all work will be done in vain. Since the toilet and the bath must dispose of water somewhere, without draining they will not work.
For household owners, there are two types of systems, fecal pit and septic.
The first way is known to our ancestors. It implies digging deep deepening in the ground. For the strength of the wall are strengthened with a metal sleeve or rest bricks.
The septic system is a set of cleaning facilities that will be thrown into the soil only fluid purified from large inclusions.
Ventilation
Ventilation in the bathroom must work well. Otherwise, fungi and mold will constantly appear in it.
The easiest way to organize ventilation in your own house is to create a natural air circulation system.
To create it, it is necessary that the ceiling in the bathroom had two holes. Through the first one will flow fresh air, and through the second removal of moisture.
Also a good solution will be the installation of the window in the bathroom, if the conditions allow you to constantly open the window to create a healthy circulation.
However, this method is suitable only for relatively warm regions. If you leave an open window with a sufficiently large minus, you can not only get sick, but also output the water supply system.
Get rid of this danger and improve the influx of air by installing the hood in the bathroom. Such ventilation will allow you to organize a constant temperature in the room, remove excess moisture and smell and prevent the appearance of mold and fungi.
Planning
For a comfortable existence, everyone needs enough space. Therefore, you should not make a bathroom in a private house, with photos of which you can find further, too small. The minimum area is considered to be 4 square meters. m.
It is also not necessary to have a bathroom in another, relative to the bedroom, the side of the building. Much more comfortable when in the morning or at night you do not need to go far to wash or take a bath.
Select the location of the elements and nodes is already on the preparation of the project of the house. You need to choose the right place to exit draining communications.
Features
In a private house, the bathroom is almost always located so that one of the walls combined with the street.
In order not to form an extra condensate and no additional difficulty appeared, it is desirable to organize an additional layer of insulation in this area.
When choosing a suitable water heating system, it is possible to organize a heated floor without much costs.
Do not forget about the protection of electrical chains and electrical appliances from moisture from entering them.
Appearance
In order for the hike in the bathroom or simple cleaning of teeth delivered positive emotions, you need to organize a pleasant design.
Features of the medium in the room require that all surfaces easily and have no pores. The most common output is the use of tiles.
But in order to make the appearance more modern, you can buy plastic panels. Their large range includes not only different colors, but there are also models with original drawings.
Stock Foto Bathroom in private house
Waterproofing is designed to protect the design of a wooden house from a malicious effect of high humidity level characteristic of the bathroom room. Long-term contact of wood with water and water vapor leads to the destruction of the natural organic building material.
From constant dampness unprotected by waterproofing materials, the structures of the floor, walls and the ceiling of the bathroom with time begin to rot, mold appears and an unpleasant shaft. Properly performed bathroom waterproofing in a wooden house will relieve the construction from the listed problems. If you wish, you can delve into the essence of the question, and, sorting out with technology, fulfill all the work on the trim of the bathroom with your own hands.
The construction market presents waterproofing materials in a wide range. All products can be divided into several groups if classified according to the method of applying waterproofing.
Group # 1: Paint
This group includes all types of mastic and emulsions manufactured on a polymer or bitumen basis. After applying these compositions, a steady waterproof surface is created.
We need to put the paint waterproofing, withstanding a certain time interval between approaches.
Group # 2: glued
In this group there are rolled or film materials produced on a bitumen or polymer basis. The gloveting of materials on a wooden surface is performed using hot or cold mastic applied to several layers.
One of the essential deficiencies of the use of the plated waterproofing is the presence of seams between the canvas in which moisture can penetrate.
The problem is solved by laying bells of therapy, as well as filling rolled waterproofing with waterproof compositions on a cement basis, such as hot bitumen or pitch.
Before applying a preheated bitumen, leaf or rolled waterproofing is covered with reinforced fiberglass.
After soaring the applied composition over the entire surface, a seamless layer is formed, which meets all the technological requirements of waterproofing.
Group # 3: impregnating
All impregnating materials included in this group, which include a water-repellent cement with the addition of crushed sand and chemicals.
When applied such waterproofing, the surface of the tree is impregnated and waterproof is made. This type of waterproofing is not recommended to do in residential areas.
Of the listed groups for waterproofing the bathroom in a wooden house, only the first two are suitable.
Often they are combined using for waterproofing of hard-to-reach places of mastic, and for smooth surfaces - rolled materials.
Wooden walls of the bathroom in the house are impregnated with moisture-resistant composition, and under tiled floors there is a waterproofing layer.
How to apply waterproofing material?
Before applying waterproofing, the surface is cleared and ground deep penetrating compositions.After drying, the primer is flooded with a layer of bituminous mastic, while special attention is paid to the sealing of the gaps present in the field of laying of communications, and the blasting of the corners.
Remember until the mastic can not dust. After a day after drying, the bitumen mastic is stacked the following layer of waterproofing in the form of a bathroom sliced \u200b\u200bin the sizes.
Their number is calculated taking into account the fact that they will fit the flashes by entering each other by 10-15 cm.
The floor in the bathroom is recommended to do lower than in the rest of the houses at home. A small supply in height will save from the flooding of the entire house in the event of a sudden emergency type of a pipe breakthrough or disorders of the compound, breakdown of the washing machine and other incidents.
Poland waterproofing will not give water to penetrate the basement or on the lower floor of the house. Water will stand until its level rise above the reserved stock.
Special attention is paid to the so-called "wet" zone, which includes the walls of the wall near the floor, the shower cabin, around the washbasin within a radius of 50 cm.
The ceiling in the bathroom makes suspended from moisture-resistant drywall or glossy PVC panels. Wooden structures masked behind the finish finish are ground and labeled mastic.
Scheme of mandatory places to apply waterproofing in the bathroom in a wooden house, taking into account the minimum distances around plumbing devices
Details about waterproofing wooden floor
In wooden houses, as a rule, overlaps are also performed from the tree. Concrete ties are not welcome, as they increase the load on the foundation of the house and are the bridges of the cold, through which the heat leaves from the dwelling.
Therefore, in a wooden house, the floors are placed on lags, which are subjected to a thorough impregnation with waterproofing materials.
Before starting the treatment of the lag, the foundation is waterproofing, coating with mastic or plastered with a special solution obtained from a mixture containing polymer additives.
In the impregnated with an antiseptic lags are placed by a rough floor, which is covered with rolled waterproofing. Outdoor tiles are placed on top of this material.
Technology laying rolled waterproofing on the floor
One of the main factors affecting the choice of materials in modern construction and repair is the speed of their laying. You can achieve this at the expense:
- reduction of interlayer laying intervals;
- reducing intervals for the implementation of related technological processes.
Self-adhesive bitumen-polymer film used for floor-insulation of the floor in a wooden house bathroom belongs precisely to such materials.
This option is also suitable for waterproofing inter-storey floors, bathrooms, premises with wet technological processes, kitchens.
The film perfectly glued not only to concrete bases, but also to wooden. Therefore, this rolled material can be used for waterproofing horizontal and vertical surfaces in a wooden house.
The whole process from the preparation of the floor to apply ceramic tiles to it is carried out without interruptions, that is, for one cycle. Waterproofing the floor in the bathroom can be performed using this technology in one day.
Preparation of the foundation should be paid to special attention, since the quality of laying of the waterproofing membrane depends on this stage.
Sketchy image of mounting moisture-resistant floor and wall surfaces in the bathroom, arranged in a wooden private house, cottage or townhouse
Algorithm for performing work
- First, they take out or clean with a vacuum cleaner all dust and dirt from the draft floor to ensure good adhesion of the waterproofing film with a wooden base.
- The next step is the gender priming, during which a bitumen emulsion primer is applied to the entire surface of the roller, which does not have an unpleasant smell, as it is divorced by ordinary water, and not solvent. The primer is applied to the walls around the perimeter of the bathroom, while the bandwidth is 20 cm. In the corners and hard-to-reach places for roller, the primer is applied to a brush.
- Check the degree of drying of the applied primer using a cotton disk, which is applied to the treated floor. If the cottage disk remains clean, then the bituminous primer is trying. Notice, the entire drying process at a 20-degree temperature in the room will take no more than 20 minutes.
- After drying, the primer immediately proceed to laying the waterproofing membrane, which can be used as self-adhesive bitumen-polymer rolled material. It does not need to use open fire for its installation, which is very important for wooden buildings. The material is easily placed on its own, in exceptional cases you can do the help of my wife or mother-in-law.
- Rolling the roll, measure the piece of the desired length and cut off with a sharp stationery knife, give the material a little spitred. Then the web can be twisted at both ends to the center, the protective film is cut off, it is neatly removed, spinning the roll in the opposite direction, while the material is firmly glued to the base.
- Air bubbles are removed by a brush, which stroke the laid cloth several times.
- The next cloth is laid by the brass, the width of which should be at least 100 mm. The prime zone is treated with primer or bitumen mastic. Carefully rolled heavy roller.
- After applying rolled waterproofing on the horizontal surface of the floor, it is processed to the processing of walls adjacent to the floor. For this, the cloths of 30-35 cm wide are cut off, of which 10 cm leaves for the floor, and the rest is on the wall. A discrain film is made at a distance of 10 cm from the edge. First, the waterproofing material is glued to the vertical surface, that is, to the wall, and then roll to the floor, pre-blurred by primer.
- After the installation of self-adhesive rolled waterproofing is immediately proceeding to laying ceramic tiles to the floor.
Caution Waterproofing: Optimal Solution
To protect the surfaces of the floor and walls in the bathroom of a wooden house, improving water-repellent materials manufactured in the form of various mastics are ideal:
- Polymer-bituminous Mastics are convenient in applying and durable in operation.
- Polymer cement Mastics are capable of forming a strong layer of waterproofing film, one of the properties of which is a good degree of bending resistance.
- Bituminous Mastics belong to the cheapest coating waterproofing materials with reduced quality, since at minus temperatures become fragile.
- Bituminous rubber Mastic compositions have higher plasticity, and therefore capable of withstanding those low temperatures in which ordinary bitumen mastics begin to collapse. Naturally, bitumen-rubber mastic is sold for a larger price.
Another scheme of the waterproofing device indoors with a high level of humidity, to which the bathroom belongs in a wooden house
Polymer-cement mastic consists of a powder containing moisture protection binders and inert fillers. It also contains water-dispersive acrylic polymers.
After mixing all components, a waterproofing material is obtained with a high adhesion ability (adhesion) with any type of base.
Tip №1:
If between the layers of polymer-cement mastic additionally pave the reinforced grid of fiberglass, the waterproofing will turn out even stronger and more reliable.
Tip # 2:
The seams of the adjoining of vertical surfaces to horizontal planes must be enhanced by an elastic sealing ribbon.
Preparation of wooden floor to waterproofing
Before applying a coating waterproofing to the surface of a draft wooden floor, a number of preparatory activities are required to seal the gaps.
This will reduce the consumption of mastic, which will not leak through the cracks, chips and cracks in the floor.
The draft floor must be cleaned of contamination, put a crate from bars on it, insert the insulation in the cells, which is better to use polystyrene foam, which forms a solid and flat surface after laying.
The joints between polystyrene foam plates and lags should be treated with sealant. Instead of expanded polystyrene, mineral mats can be treated, but at the same time they will have to close the waterproof plywood.
Preparation of the wooden base of the floor in the private house bathroom to apply the selected waterproofing material
Coating technology for coating waterproofing
- Mix the liquid rubber with activators, and immediately apply the resulting composition on the floor using the roller. Brush thoroughly wake the shakes of the floor and walls.
- Wait for a complete drying of the liquid rubber, after which you evaluate the quality of the obtained waterproofing. The surface of the film to the touch should be homogeneous and smooth. You can apply an additional second layer of waterproofing so that the thickness of the protective film in the end was about 2 mm.
Laying the finishing floor covering in the form of a tile directly on the waterproofing layer is not produced, since the tile glue is poorly connected with rubber compositions.
This disadvantage is corrected by filling the fine concrete screed, enhanced reinforcing grid.
Waterproofing of the coating type, applied to the floors, adjacent to the walls, the screen of the bathroom, sections near the pipes of water supply and sewage systems
The cooler waterproofing is used to protect wooden and concrete surfaces. This method is suitable not only for the decoration of the bathrooms, but also for repairing rooms with even greater levels.
Such objects include pools, water parks, washing branches of baths and others. The undoubted dignity of the coating technology is simplicity of installation of waterproofing, which is very important when finishing a bathroom in a wooden house with their own hands.
Mastics, representing fluids, are simply applied to the surface, align and dry during the time required for this.
Drying out, the waterproofing film acquires excellent water repellent properties and becomes capable of stretching with subsequent restoration of the initial form.
That is why the coating waterproofing is considered the optimal solution to protect the wooden floor in the bathroom room.
Using special wood breeds
In the bathroom you can not close the wooden floor with other materials.
In this case, for flooring, it is necessary to use special wood species (tick, plug) or building materials that have been thermal processing during its manufacturer.
Excellent waterproofing qualities are characteristic of individual wood species. Preceded by specially wood acquires moisture-resistant qualities and the ability to maintain their initial sizes during the entire service life.
The cork coating is resistant to the constant impact of moisture, while it is very decorative and firmly.
Tick \u200b\u200bfloors are valued for the high content of essential oils, moisture resistance, durability, subject to the technology of laying floors and process the sealant slots.
The walls of the bathroom, decorated with a board, covered with deck varnish.
Wooden floors and decoration elements in the bathroom are made of thermally treated moisture resistant wood with high waterproofing properties.
Now you clearly imagine the process of waterproofing the bathroom in a wooden house and you can decide on the choice of the method of it. However, one desire is not enough.
Still, finishing the bathroom with all the associated processes is better to entrust professionals, and to follow the performance of work with knowledge, albeit superficial.
Waterproofing a bathroom, equipped in a wooden house, must be carried out for all surfaces: floor, ceiling, walls around the perimeter.
Evaluating soberly opportunities, think about hiring specialists from a proven company that provides services for the repair of the bathrooms.
Errors at the stage of performing waterproofing can be in disrete not only the bathroom room, but also at home as a whole.
The arrangement of the bathroom in the apartment loses the possibilities of the bathroom in a private house. First, a private house has a large free place than urban apartment. Secondly, many homes are erected according to the design project and therefore the necessary dimensions and the number of bathrooms in the future are laid at the construction stage.
Bathroom project in a private cottage
For owners of country private houses, the problem of water supply and sewage improvement is very often relevant. Urban residents, these difficulties bypass bypass, because centralized systems are always at hand. And outside the city, as a rule, can not do without creating its own autonomous systems. First, consider the water supply system.
First of all, it is determined which water supply system is more appropriate in a particular area. Modern equipment will help in the construction of any systems. If it is more profitable to make your own well, please, if the well is best fit - and for him there will be his assistant. The main thing in this is to weigh everything in and against, but best to invite specialists.
Installation of communications in the bathroom Such equipment as a pumping station will help in organizing the water supply of the bathroom, and it will do it without the help of a person - in automatic mode. All that will need from person is to turn on the water. Such an aggregate is not too demanding at the place of placement, so there should be no problems with the installation.
After organizing the water supply, you can think about the heating of water. In this case, it is necessary to choose either electric water heaters or heaters operating on another principle, for example - gas. Installations of two-kidnap-type heating are increasingly popular, which allow you to "kill two hare at once": with the help of them with heating and hot water supply.
When all questions regarding water supply to the house are solved, it's time to think about the drainage, without this, the toilet and the bathroom in the private building will not cost any way.
Private cottage water supply scheme Each owner needs to decide which sewage system is suitable for the house most. You will have to choose from a conventional fecal pit and septic. It is a dumped deepened deepened brick.
Septicity consists of lifting containers of forming a kind of sewage filtration system. Thanks to her in the soil, water purified from large parts.
Septict is characterized by a longer service life and versatility relative to the type of soil type.
Ultimately, it remains to pave the pipeline between all the components of the water supply and sewage system and the bathroom in the country house will be ready.
Bathroom ventilation
Bathroom ventilation in its own home is important for the comfort of people living in it. Thanks to ventilation, the wet air is removed from the room beyond its limits.
Bathroom ventilation scheme and all at home If you lower this moment, then the room will create ideal conditions for the formation of mold and fungus, which is fraught with the damage of the interior items and other components of the room, and can also cause health problems at households.
Read also
Internal stairs projects in the house
There are several options for performing ventilation in a private house - natural and forced ventilation. It is easiest to easily equip natural ventilation indoors. It is created by organizing two holes on the ceiling, one of which will serve to remove wet air, and the second for the supply of fresh air. This type of ventilation may entail excessive cooling of the room during the cold weather.
In order to prevent an extra circulation of the extractor or the truth is equipped with an adjustable damper, which will provide, if necessary, ideal conditions in the room.
Different types of bathroom fans Forced ventilation differs from the above-described type by including a fan installed on one of the channels.
With the help of forced ventilation, you can organize ventilation of the entire home, so that optimal conditions for accommodation will be created in all rooms.
Bathroom layout in a private house
In order to make the bathroom in the house you need to know the recommended bathroom sizes. Bathroom sizes in a private house must be no less:
- 4 sq. M. m in the case of a combined bathroom;
- 3 square meters m in the case of a separate location of the bathroom.
The layout of the bathroom in a private house most often assumes its location near the bedrooms. If the floors in the house are more than two, then for convenience it is best to make several bathrooms.
Planning a small bathroom in the cottage At the home design stage, it is necessary to provide for the required amount of free space in the bathroom, based on the objects located there. If the layout is made correctly, there should be no problems in the future.
How in a private house make a bathroom
Among the features of bathrooms in private homes, it is possible to note the fact that at least one wall will contact the street, whereas in urban apartments, as a rule, bathrooms are bordered with an entrance.
As a result, there are different temperature modes. Given this feature, you need to perform a number of events at the finish stage to organize a warm and cozy room. As a rule, it can be limited to one of them, for example, to warm the walls outside the building and the ceiling inside it.
You can also insulate the floor of the room, handling the "Warm floor" system. If in order to insulate the room used both, then you should not worry about the violation of the thermal regime.
Original bathroom interior in a private house It is worth noting that heated towel rails are familiar to apartment buildings, can also insulate the bathroom. Then you, for sure, do not disturb the condensate on the walls, formed due to cold walls, as well as mold and fungus, for which there is not enough warm atmosphere of the room is an ideal place.
In order to solve the question of how to insulate the bathroom, it is necessary to deal with existing insulation. It is possible to insulate the room with mineral wool, glass gambles or plaster with water-repellent properties.
For a safe stay in a wet bathroom environment, it is very important to ensure the right operating conditions of the electrical appliances, which are to organize the contour of the protective ground.
It is necessary to apply the protective disconnection devices of the UDO, which will prevent human lesions by electrically current. If there is not enough experience to fulfill these works with your own hands, it is best to contact the specialists, because it is a very responsible moment.