Wax for wood and special oil helps to create protective layer And get rid of many problems associated with damning of wood, also widely used wood coating by verse. Proper treatment Wood wax can be produced at home. We will try to be available to tell you how the coating of the tree wax, butter and the verse.

In which cases you need to cover the tree by the verse

Morilka I. protective compounds (impregnating) for wood apply just as if you just wanted to paint it. It should be applied to the prepared tree quickly, but in order to get a smooth layer on smooth wood, it will be necessary to do it very carefully. Each plane should be covered by you continuously, otherwise, if the simulator or impregnation in this area will dry earlier than on the adjacent one - this place will be a noticeable seam.

Apply a veil in the direction of wood fibers. Try not to take too much makeup on the brush and smear random drops before they dried.

Be sure to complete the processing of one section before proceeding to the next one. In places of connecting two sections, pay attention to the applied layers do not overlap. Tree coating by mournful complex enough technological process. Practice first on the invisible piece of wood.

Wood Treatment Wax - Walk

Wax wax is successfully applied on the surface of a piece of fabric, but some types of this material suggest a brush application. Re-applying and polishing creates a color depth and shine. Wax for fracturing of a tree is not necessary to apply in the direction of the fibers, but this method is still the most effective when finishing wooden surfaces.

Take a certain amount of wax made of container soft fabric And rub it into the tree until the particles of the finishing material remain on the surface being processed. Give wax to dry, but do not frozen. Polish wood with a clean cloth to provide smoothness. Wood coating wax can be repeated periodically.

Impregnating wood oil

The impregnation of wood with oil is necessary to give it protective properties. For all antiseptic oils, similar appliances are assumed. Tung oil is well suited for worktops and other surfaces that are in the cooking areas, as it is not toxic. Danish and teak oil is customary to use hardwood for processing, especially objects street furniture; Tikov oil is famous for the glossy oil. If you choose the traditional linseed oil, we recommend using boiled or twice boiled, as they will dry faster and not so sticky as raw.

Apply oil abundantly, in the direction of fibers, a little like rubbing it with a soft brush to ensure full coverage and penetration into the surface. Allow the oil to absorb a little and then remove the surplus with a piece of fabric. Leave the treated tree for half an hour (unless otherwise specified by the oil manufacturer), after which polish the surface with a dry cloth.

Varnishing or mourn

Varnish, like a verse, must certainly be applied along the fibers of the wood, although with this material you should not be too taking care of the accuracy of application. Since most varnishes are absolutely transparent, during application it is easy to not notice the raw areas. To ensure the widespread surface covering should be organized at the work site good lighting and carry out regular checks of processed areas. Go to the next section follows after the end of the previous one. Smoothly work with a brush so that the lacquer layer was even.

Write the first layer of varnish, as some types of this coating, especially on water based, have a property spread along wood fibers. Wipe the surface with a dust cloth to erase dust and give a lacquer to dry before applying the next layer.

Paints of wood paint

If you are going to mix paint to get the desired shade, pay attention to the fact that all the paints have the same base - butter or water. Painted wood requires applying a protective layer over ourselves - for example wax or varnishing. The paint should be applied along the fibers of wood. Keep a wet that area with which you are currently working, and do not overlap with those areas that are dried. Cover the painted surface with a protective layer. Before this, specify the manufacturer specification to determine compatibility finishing materials.

Processing external surfaces

Painting of external wooden surfaces is required only from time to time and quite rarely. One single layer, updated once or two years, will save the tree and ensure an acceptable appearance. Once a year should be slightly rimmed and erased the layer of old varnish and then apply a new layer of paint. The outer surfaces of hardwood will be spilled slightly faster, even if they are treated with teak or Danish oil. Although the tree remains protected, manufacturers are usually recommended to overdo it with oil every year.

Wood Morons based on natural oil

Tree veils, based on natural flaxseed oil, are used

for many years. During this time, no generation was changed, much changed, something became worse than something better, but we know exactly that Minwax has been improving its technology for more than 100 years. And every year of the veil and varnishes produced by this company, surprise their users with excellent quality.

MINWAX marilka for wood is produced based on natural linen oil, minwax - it gives a very beautiful, juicy and rich color, which highlights the structure of the tree, and the product looks pretty rich, as well as the Morli Minvaks will save the tree beautiful for many years. Minvaks is the perfect tint For stairs, furniture, doors, and wooden floors, logs, wooden facades. MINWAX is environmentally friendly so suitable for use in residential premises and save your long wooden interior from aging and ultraviolet. Morlogs Minvaks are fairly easy to use. What would give a product the desired tint It is enough to apply two layers with a brush (there is no point in the third, because all saturation is achieved by two layers. The subsequent layers will not change the result, but will spend your time) wait 10-15 minutes that the wood would have soaked, and erase the remnants of a dry rogue . After this procedure, the flows on your product will no longer remain. After applying the first layer, it is recommended to wait 4 hours before applying the second layer.

The huge palette of the colors of Morilok Minwax is represented in 22 variations:

All these colors can be mixed with each other and get even more juicy, beautiful shades.

You ask why you have chosen a simulator from the companyMinwax? Well, let's try to answer this question. I use Morli Minvaks You:

1. Save time.

2. Save strength.

3. Protect and betray the wood of wood for many years.

Well, here are the main advantages of the veilMinwax. Economic time you save money. After all, not in vain in modern society They say: time money.

One of the minersMinwax This is a high price. But this is compensated by the speed travelers and a great view of your product, whether it is furniture, staircase, floor, wall I.T.D

Morleem® Wood Finish ™ Application Instructions

MINWAX® WOOD FINISH ™ Oil-based wood-based vessel, which provides long-timber wood. It penetrates deeply in the pores filling them, thereby not allowing other particles to get into them.

Excellent solution for toning wooden stairs, furniture, cabinets, doors, finishes, plinths and wooden floors. MINWAX® WOOD FINISH ™ will facilitate achievement excellent results In your projects.

Order application

1. Align the view with the help of sand, start with coarse (120), and ending with a shallow (220) skins. Remove all dust, wipe the surface with a cloth moistened with White Spirit.

2. On the wood of soft breeds for the best result, use Minwax Wood Conditioner - air conditioning for a tree, in accordance with the instructions.

3. Pre-stirrate. For brighter shades, you can use 209 simplifier (Natural) as a diluent.

4. Apply the veil in the direction of the fiber tree with a brush, an applicator or cloth.

5. Let me absorb 5-15 minutes than longer than time absorption, the richer and darker.

6. Will erase the surplus of the non-absorbed simulators with a dry pure lobby cloth in the direction of the tree fibers.

7. To obtain a dark shade, apply the following layer of simulats after 4-6 hours. Do not hide between the application of the layer !!!

8. The surface is ready for further processing after 8 hours. Recommended before the coating varnished compositions Treat (wipe) Toned White Spirit surface.

More about Morket

Tool Brush, Fabric or Fauro Applicator

The next layer after 4 - 6 hours

Drying time 8 hours

Covering 1 liter of the veil grabs 14 sq.m.

Cleaning tool Water and soap, White Spirit

Number of layers normally 2 layers are more made to obtain a saturated layer.

Used to tinted wooden stairs, wooden furniture, interior items, as well as for toning wooden details on ships (marine, river)

Buy or order you can in our online store Lespro .ru.

with delivery in Moscow and the Moscow region, Kaluga and Kaluga regionRussia transport companies.

Oil vehicle - an inexpensive caustic liquid that is applied to the treated wood for the purpose of subsequent coloring. Morlogs are used to tinted various wood breeds, parquet, array, cabinets, antiques, furniture, lining and other wooden surfaces. They are also applied to plastic and steel bases. Oil veil is sold in several color shades. The most popular among consumers is a black wood verse.

Properties:

• has resistant to K. ultraviolet radiation;
• emphasizes the structure of the wood;
• gives surface decorative shade;
• reduces crackability and increases material strength.

Before applying oil simerings, it is necessary to prepare the surface - it should be clean, dry, without the presence of oil spots, fat or wax. The oil melon for wood is evenly applied to the surface with a brush, roller or collapse. Surplus and leaks are removed with a dry cloth. The surface painted surface is ready for subsequent processing the day after the end of work.

In modern construction hypermarkets Sold both gel and oily veil. Buy a tree for wood best price With delivery in Moscow and the Moscow region you can in the online store "Master Tibot". You can clarify the cost of the selected product in our shop of paints and varnishes. Sale of products is carried out wholesale and retail.

Strange, but such a convenient thing as "oil veneers" does not use much popularity. Moreover, so also some sellers of this product do not know how to use it.
I also thought that aquatic, or alcoholic veneers, these are the most comfortable materials for manual painting materials. It turns out that if you do not have a special room for painting, compressor and collapse, then for the convenience of use, oil veneers are best of all.

I will explain why.

if it is very rude, then the vehicles in the way of painting wood are divided into two types - penetrating, and crumbling.

Penetrating, surpars!, Penetrate the surface of the tree and score it from the inside. At the same time, the structure of the tree is emphasized, and due to the penetration of the dye inside, small scratches Not so replacement. Those. Scratches are invisible to the depth of blaming :)
Lipa, for example, the whole throat can be attacked. Solid wood varieties - on the share of a millimeter. Lifting is prieved on half a million, which is enough to conceal scratches from a good blow to a fork with a sweep. From the chisels no longer saves;)

Crowing veil, it is actually a translucent paint or varnish, which is punishable from above. At the same time, the contrast and drawing of the wood is being built.

It is impossible to unambiguously say which of the types of vehicles / paint is more beautiful. It depends on the tree breed and from the color of the veil. Those. It is better to pick up the "picture" under your situation.

Among the penetrating vehicles, there is gradation by the type of solvent. Alcohol, aquatic, oil (usually based on flaxseed oil).

Alcohol is terribly dry quickly, penetrate it seems like deeper than water. But their drying speed, in my opinion is a disadvantage of non-professional use. Excess or not the right brush stroke, and get a latter / plot with a more dense procraner.

Water less penetrating, but at the same time they can be applied with a roller, and it is more convenient to fight the same adhesive. Alternatively - can be applied in a diluted form into several layers, then the errors of the previous layer will be "painted" afterwards, although the time of operation will increase.

But oil verses are simply unlikely to be easily applied - first we pour puddles to our surface, then we give to absorb, and then, after 15 minutes, we wipe it dry. Everything. No divorces, no shortracies. All you need - the tree has absorbed itself, we removed the rest, and not in a hurry and no fear of "double passes." It is not necessary to wash the brushes - the rifle wind in a jar with water.

Of course there are disadvantages from the method:
- The quality of the procession depends on the quality of the preparation of the wooden surface, so it is necessary to swee very uniformly and good. Up to 240 grains. Actually, with any veil quality, the surface quality is important, but here especially.
- Such a soft and capricious tree like pine, can unevenly absorb oil. This trouble is jumped with air conditioning, which itself absorbing in soft tree Aligns its absorbent abilities for a while (up to 3 hours).
- Ragges should be disposed of in water, and then they can self-order.
- Well, as if the smell ..... But the respirator with the gas-migratory filter is not expensive.

But everything else is the advantages :)

Video for visual demonstration.
Morid MINWAX

Wood even after the appearance of metal and various modern synthetic materials For construction remains popular and in demand, as it is a high-quality and eco-friendly raw material. And thanks huge selection All kinds paintworks, such as a wood veil, it became possible to largely improve the appearance of wood products, and, that is important, extend them operating time.

Features

Under the influence of aggressive factors external environment, including of different kind Bacteria, mold and pest insects, the tree can be deformed and start rotting. In order to minimize the risk of such problems, it is very important to take care of wood in a timely manner. Most effective option The fight against such circumstances is considered a wood veil. The tool is liquid compositiondefining the desired tone from the mass of colors and shades. This allows you to reflect the natural color of wood or radically change it.

In addition to aesthetic functions, the main feature Composition are antiseptic properties.Thanks to the use of wood, wood can serve you twicear longer.

Another feature of almost all types of verse is considered the ability to penetrate deeply inside the tree without harm to the pattern and texture, unlike enamel or paint.

Wood blasting coating has some advantages:

• the possibility of combining various shades of color;
• strengthening and preserving the structure of the tree;
• increases the operational term of products;
• the indicators of the stability of the tree to moisture increase.

Morilka is not only a varnish for wood, thanks to its use, you can create a unique interior in the room or transform perfectly, at first glance, ordinary interior items or furniture.

The following liquids are used as the basis for the production of veils: oil, water or alcohol. Such a separation allows you to allocate several types of this composition.

Views

2 varieties are isolated - water and non-aqueous (oil and alcohol) veil.

Water-basedoffered by manufacturers in ready-to-work condition or as a powder (dry mix). This type of composition is most often used because it has a very diverse color gamut. The color of the powder veil can be easily adjusted, it directly depends on the amount of bulk substance, that is, what is more, the richer and brighter will be the result.

The composition on a water basis has an advantage: no nasty smellThanks to this, the veil can be used inside the residential premises. By the cons of this species include the ability of the means in the process of processing the surface of the surface of raising fibers. Due to this, the moisture resistance of the tree is reduced. The time required for complete drying of the veil varies within 10-14 hours, which can also be attributed to the consumers of the composition of the composition.

The technology of work with a vessel on a water basis requires to pre-wet the wooden surface, then to open. The composition is filtered before use. Only after performing such preparatory work You can paint wood. This tool is not desirable to use for smiling tree species.

Oil compositionsinclude dyes dissolved in olife or oils. You can work with impregnation of this species by any tool. The remedy does not raise the fibers of raw materials and does not give it to having excess moisture. Using a similar composition, you can get any color and shade, additionally using dyes. They are produced in the form of a powder, the White Spirit is used for breeding.

According to experts, oil veil is the most simple and easy to use. A oil-based impregnation is very popular among decorators and designers due to the possibility of obtaining the desired color.

It should include its environmental friendliness, since flaxseed oil is used for it. For complete drying of the surface requires about 2 hours. The composition does not leave stains.

Alcohol - This is a dissolved aniline dye. The impregnation is produced in finished or in powdered form. The main task of the composition is to protect wood from the devastating effects of moisture and ultraviolet radiation.

The main advantage of the alcohol vehicle is its ability to instantly absorbed into the fibers of the wood. Drying the composition on the surface after 30-40 minutes.

The minuses include the fact that the manual method of acting on the tree will not work, since the alcohol will quickly disappear, which can lead to the appearance of spots. For work it is better to use the paintopult.

Along with the above types of vehicles for wood, fundamentally new products began to appear in the range of construction supermarkets. Modern technologies allowed manufacturers to offer a consumer acrylic impregnation on a water basis, as well as the wax. New funds were developed in order to exclude the main deficiencies of the already existing compositions.

These tools are well idle on the surface, most often they are used for painting and floor processing.

Wax Morilkarestarate old wooden coatingsShe perfectly paints inconsistencies in color. In addition to the above characteristics, positive qualities modern compositions You can include their excellent moisture protection properties. However, such funds are very vulnerable to mechanical damage, so they should be covered by varnish. Acrylic and wax fluids are represented by a large manifold color palette. They highly emphasize the structure of the wood.

The minuses of acrylic veneers should include their high cost, as well as the possible formation of spots on the surface when applying two or more layers.

The main disadvantage wax formulations It is believed that they are not able to penetrate deep into the wood. The means only forms a protective layer on top on the material. It is not necessary to use two-component varnishes before the wood processing or polyurethane.

Since the composition perfectly saves the wood texture and protects against negative influence Many external factors, thereby extending its operational period, the answer to the question of what is worth acquiring - varnish or a sampling becomes obvious.

Color spectrum

The white composition can be attributed to alternative models. Such a means is the most environmentally friendly and inexpensive. Along with the, white Morilka represented by a large variety of natural shades.

Today is an assortment similar funds To cover and paint wooden surfaces can satisfy the needs of each buyer. Such products allows the wizard to give wood almost any color. AT lately Among the specialists is in demand for the black color, which gives the treated surface the appearance of a black mirror. The technology of applying a black color requires pre-polishing base.

Shades of gray will help the surface to harmoniously fit into the interior of any room. However, the use of this color will be successful only if the walls and interior items in the room will be bright. Grey colour May cause apathy, and products painted in such a color will be lost against the background of the rest of the decoration.

According to psychologists, the most optimal color for a person is green. He causes positive emotions And suitable for staining walls and ceiling, as well as for furniture and other things.

Blue color gives expressiveness and depth of the processed product. The simulator of this color will be well combined with white and yellow tones.

In addition to multi-colored compositions, there is a colorless impregnation on stores, which makes it possible to maintain the natural color of the material.

The total color of the tree depends on the amount of printed layers., so experts advise final decision Only after test coloring. The material for testing staining is polished and cleaned. Next, proceed to apply the first layer of the composition. After its complete drying, a second layer is applied, but to a smaller area. The third layer is processed by the material on the wood site, which will be even smaller than the designated place under the two previous layers of the veil.

When all sections are fastened completely, comparing the results obtained, you can choose the color you like.

Manufacturers: Review and reviews

Today, the LKM market presents goods of foreign and domestic producers.

"Novbythim" Ijumps a company that specializes in the production of construction and household chemicals. The range of produced compositions present various varnishes, paints, decorative materials, as well as simulats on a different basis.

According to most buyers, the compositions for wood from the company "Novobhim" for processing and painting wooden products They have a strong smell, but perfectly copble with their task, as well as quickly dry. Therefore, working on painting needs to be carried out as quickly as possible. The composition lies quite smoothly, the color is homogeneous.

Trademark Liberon It works as part of the company V33 - the international leader on the production of LKM and funds for wooden surfaces. Products of this brand are popular around the world, since they are intended to care for wood, as well as for restoration work with antique interior objects and furniture.

French formulations for Liberon wood on the domestic market are represented by decorative protective vessels, aggregates for wood, wax removal tools.

Consumers celebrate some advantages of wood Liberon:

• convenience and ease of applying;
• no smell.

By cons of such products include some inconsistency of the claimed color indicated on the packaging.

The most famous German companies that specialize in the production of wood for wood are FLAMINGO, DUFA and CAPAROL.

Caparol has a separate line of means to protect wooden surfaces.

No less popular products for leaving and painting wood are the compositions that are produced by Turkish companies. Leaders among them are manufacturers BETEK, DYO, Marshall.

Specialists who are engaged repair work, noted high quality German compositions for wood.

Only positive feedbacks have Turkish products for painting wooden surfaces.

Morlogs can also be classified by appointment - means for internal work and formulations for outdoor use. The main and only criterion for their differences is the presence of the funds for external work of pigment, providing protection against burnout.

We can easily choose funds to determine the tool that will be used to process the surface by the acquired composition. There are versions that are covered with a wooden surface with a brush, for some it may be needed a spray gun.

For internal works, for example, if the processing of furniture items is required, it is better to give preference to wax or oil compositions. They have almost no volatile compounds. Almost all the simulats are compatible with varnishes for painting.

Aids based on alcohol have its own characteristics. They are ideal for toning furniture, wood products or doors. And for the stairs or parquet it is worth choosing another kind of verse. Alcohol formulations should be applied to the surface of the paintopult, since any error or delay in the work will be fraught with the formation of stains, as a result of which repair or construction works We will have to start again.