How to remove the unpleasant smell of the sink in the kitchen? The causes of the appearance of the smell of the sink stinks from the drain of the shell.

We are accustomed that the kitchen usually smells of freshly prepared food. But sometimes a sharp smell from the sink can disturb this idyll of flavors. The reasons for such a sinic can be many to get rid of this problem completely and forever, it is necessary to correctly deal with the design of the siphon and the sewer pipeline in the kitchen. In addition, if your kitchen has a washing machine, it is connected to the siphon from the kitchen sink, so the unpleasant smell can go out of the car. In addition to the usual discomfort of gases from sewage pipes can be harmful to humans, since they contain hydrogen sulfide, ammonia and other toxic substances.

The reasons for the occurrence of a sharp smell of washing in the kitchen or washing machine can be set. First of all, you need to understand why it smells of sewage, and then try to eliminate this problem.

So, an unpleasant smell of washing can occur for the following reasons:

1. Most often, the problem lies in a siphon or water-bearing in it.
2. Sometimes an unpleasant smell is associated with the fact that the sewage pipes were clogged.
3. Damage to the sewer pipeline.
4. It may not smell from the drain hole of the shell, but from a pouring, which has most modern kitchen sinks.

When you understand where you can see, you can figure out what to do to eliminate the problem. This will help you with our recommendations.

Problems with siphon

In most cases, the smell of the sink is associated with malfunctions in the siphon. This product you can see if you look under the sink. The design of plastic in the form of a curved smooth or corrugated pipe is called a siphon. It is designed in such a way that water is constantly remaining in its curved knee - a water plug, which does not allow gases from the sewage pipes to penetrate the room. If the kitchen stinks by sewage, it means that the siphon does not cope with its functions.

Siphons are two types: corrugated and flavored. All of them have the same principle of operation. In the knee of the siphon, there should always be water that performs the functions of the plug and non-skipping of the pipes. If gases pass, then there is one of the following faults in the siphon:

1. Corrugated Siphon Pipe can Provise. Usually it happens if the bending of the pipe is recorded not with the help of special holders, but with a tape or scotch. However, even a correctly attached pipe with time can be deformed. In this case, you need to either correctly attach the bending of the pipe with the help of clamps, or buy a new siphon.
2. If when mounting the siphon, errors were madeThe air from the sewage pipes will penetrate the room. To get rid of the unpleasant odor in the kitchen, you need to properly assemble the flask siphon. Usually, with independent installation, many owners allow an error and fasten the nozzle, which comes from the siphon bowl to the siphon, above the hydraulic level. In fact, it should be attached to the siphon by 2-3 cm below the surface of the water plug in the hydraulic. At the same time, it is not necessary to make this pipe touch the bottom of the flasks.
3. Drying hydraulic water. If you have left the house for a long time, no one uses water, that is, water was not merged into the drain hole, the water plug in the siphon could simply dry. In this case, gases from sewage pipes will freely penetrate the room. To get rid of the unpleasant odor in the kitchen, it is enough to drain the water into the drain hole of the washing, and the water plug will be restored.

Tip: If you are going to leave for a long time, then in the drain holes of all sanitary devices it is worth adding some vegetable oil. The oil film on the surface of the hydraulic assembly will not give water to evaporate, and upon returning home you will not find an unpleasant smell of sewage pipes in the apartment.

Sometimes it is impossible to eliminate the unpleasant smell due to the fact that the siphon in the kitchen is incorrectly connected to the drain from the washing machine. The drain hose from the washing machine is connected not directly into the sewage system, but to the siphon, since it is necessary to observe the normalized distance from the floor level. In addition, such a connection will not allow gases from the sewage to penetrate the drain pipe into the washing machine, since there will be a hydrotheking of the siphon on their way.

However, if you did the connection of the washing machine yourself, you could disrupt this requirement and connect the drain directly into the sewer. In this case, the unit may smell unpleasant. To join the drain from the washing machine, you need to buy a special siphon in which an additional nozzle is provided for these purposes. It is slightly higher than the hydraulic assembly, and not lower than it, like draining from washing.

Disruption of the hydraulication

Sometimes, even with the correct installation of the siphon, the hydraulic assembly occurs. This happens when problems occur in the main sewage pipeline or during disorders during the installation process:

1. If the installation of the sewer pipeline was performed using pipes of smaller diameter than provided by the requirements, while draining the water will fully fill the lumen of the pipe, cause pressure cutting and disruption of the hydraulic assembly. To get rid of this problem, you need to replace pipes with new products of the suitable diameter.
2. Sometimes, even in the pipes of the desired section, there may be a pressure of pressure during water drain and disrupt the hydraulic assembly. This happens when the pipeline is clogged, then the current water will fill the entire narrowing of the pipe. To resolve the problem, you need to clean the sewer pipeline in the apartment.
3. To equalize the pressure in the main sewage to the roof of the house, the pipe of the fan ventilation is displayed. If it clogs, then the waterproofs in all apartments running on this riser will be broken with massive drain water. In this case, you need to call professionals and clean the fan pipe from the roof.

Fighting clouds and damaged pipes

If everything is in order with the siphon and the hydrotherapy, then the reason for the unpleasant smell in the kitchen can be wounded in the pipes. To check them, you need to do the following:

1. On clogging of pipes can indicate a slow drain of water from the sink. It does not follow right away, and for some time it is stirred in the sink. You can cope with a vanity with a pad. To do this, you need to open water so that it will be in the sink. After that, the drain hole is tightly pressed by VATUZ and make them vertical movements. Then remove the vehicle from the drain, and give water to drain. Instead, you can use special cleaning products to remove blocks in sewage pipes. Typically, the composition falls asleep in the drain. After that, a glass of warm water is poured. Half an hour washed not to use. After this time, the drain is richly washed with water from under the tap.
2. If the water from the washing is measured normally, it means that the problem lies in the pipe flow. This can occur due to its damage or depressurization of the connection. In this case, you need to change the damaged area of \u200b\u200bthe pipeline or close the dedicated sealant.

The smell of overflow

Modern kitchen sinks are equipped with overflow protection. To do this, above the drain hole, without reaching the top edge of the washing a pair of centimeters, another hole is made. From this hole to the siphon there is a tube. Such overflow protects you from flooding. For example, if water flows from the crane, and the drain hole will be covered with dishes, the sink will quickly be filled. So that the water does not go through the edge, an additional hole is made-overflow in the top of the sink bowl.

Since it often gets water with food residues, they can be laid as a climb on the walls of the pipe and make an unpleasant smell from the overflow hole. To eliminate such a smell periodically need to be poured into overflow boiling water.

To get rid of the unpleasant smell from the drain hole, you can use food soda (3 tbsp.), Diluting it in a glass of warm water and the bay in the drain. Also use vinegar or citric acid, flooded with boiling water. 30 minutes after any procedure, the washing need to rinse with water.

Washing dirty dishes with particles of fat and sticking food leaves its mark on the walls of the drain system. A large accumulation of data of particles leads to rotten and the appearance of an unpleasant odor. No less important in this matter, the condition of the drain and siphon, whose way out of work also makes itself felt.

Sources odor

Determine the source of your troubles simply, it is enough to inspect all possible objects that can cause an unpleasant smell in the kitchen. First, pay special attention to the siphon, drain pipe and sewage. These three plumbing details are the most vulnerable to the interface and the cluster of dirt. Also inspect the space between the washing and the wall, it may happen to break the hose, flowing water or stuck old dirty urine, sex rag.

If the water does well and as a result, the smell appears, you should examine the sewage system. Perhaps a major thing came to the drain, which created a plug or a block was formed. It is the last option that is one of the most common reasons for the sink's sink itself. The greatest blockage focuses in the siphon. It is here that during the washing of dirty dishes accumulates a huge amount of fat, garbage, dirt, hair particles, adhered residues of food and gary. Of course, special lattices for the hole of the shell helps minimize waste from the drain system. However, over time, even such careful care gives cracks. A precipitate is formed on the walls of the siphon, which begins to rot and smell.

Help solve this problem under the cleaning of the siphon. The mechanism of action is as follows. Substitute under the base of the bottom item of the siphon bucket, carefully unscrew the lid and remove the entire abstensive dirt, fix the cover in your place. After that, we rinse drain with steep boiling water with the addition of a small amount of detergent. If the siphon has a corrugated tube, it is also necessary to disconnect and clean it. But in the houses with the old drain system, the siphon is quite problematic, especially with a cast-iron knee.

If water does well and as a result, the smell appears, you should examine the sewer system

The main purpose of the siphon is the creation of a hydraulic assembly, that is, a special barrier blocking evaporation and penetration of strangers to the apartment from the hole of the shell. If the hydraulic washing in the siphon is absent, then the appearance of foreign odors is inevitable.

Most often, the problem lies in the improper installation of the drain system with a siphon. Depending on the type of design, this problem can be solved in the following ways. If there is a bottle-type siphon, correctly fix the location of the drain nozzle, so that it is by about 2-3 cm below the water level.

With a corrugated plum, it is important that the tube remains slightly curved and not straightened. Check the correctness of its installation and, if necessary, give the desired form. This will help create a waterproofing, and so that the tube is again not returned to the previous position, fix it with special clips.

If there is no hydrophopication in the siphon, then the appearance of foreign odors is inevitable

In other reasons, the violation of the hydraulic vehicle may be a vacuum breakdown. A characteristic feature of this violation is the bouffaging of water in a scoring drain hole. You can solve this problem in two ways. The first one is cleaning the fan tube, for which it is best to seek help from a specialist. The second is the installation of a vacuum valve, normalizing the pressure in the sewage.

Other causes of sink smell

In addition to the main reasons for the appearance of the smell of the drain hole, there are both secondary, which also provoke this problem.

If the unpleasant smell focuses under the sink, then the cause is listed in the disruption of the tightness of the structure and the appearance of cracks. To find the very source, it is necessary to smoothly open water and look at the state of the pipes and joints. If the water seeps on the junction of pipes, the reliable fixation of the silicone sealant or the replacement of the seal will help to eliminate the problem. In case of detection of cracks, we immediately change the old pipe to the new one. In the occurrence of leaks, the smell can be absorbed into the floor covering. Therefore, after replacing pipes and linings, clean the floor with a refreshing cleaning agent.

The cause of the smell may lift in disorders of the design

Long lack of operation

If you have not enjoyed the sink for a long time, the water in the drain system can be stamped, and the walls to dispel, which also provokes an unpleasant odor. Therefore, before a long business trip or travel, add a couple of vegetable oil to the drain hole. This will create a reliable enveloping film, prevent the evaporation of moisture and spread the smell at the same time.

Methods for cleaning the drain system

To clear the sewage and all parts of the drain system from a cloth, as well as eliminate the outsiders from the sink, chemical and mechanical means are used. Recently, a hydrodynamic installation, which is washing the system sewer under high water pressure is also not less popular.

Soda is based on sodium carbonate, however, as in many chemicals of cleaning. Therefore, this substance can be attributed to the folk remedies for the fight against the smell, blocking in the sink and similar chemical impact. This tool can be combined or used separately.

For the first variant, we prepare a solution. Divide the three tablespoons of food or soda soda in thermal water and pour the mixture into the drain, leaving it for 20-30 minutes. After some time, we rinse drain with warm water, and even better we are screaming with boiling water.

Vinegar
Soda

This method acts well with minor stamps. If the problem is more pronounced, then you can combine the use of soda with cutlery vinegar. To do this, we pour out about half a pack of soda into a drain hole and poured it with a glass of vinegar. The mixture will begin to hiss and foam, this is a normal chemical process. We also leave this mixture to interact with the walls of the drain system, after which they scrape everything with boiling water and thoroughly wash off. To combine useful with pleasant, use lemon juice instead of vinegar. This will allow you not only to cope with the problem that has arisen, but also fill the citcent citrus aroma.

For a better result and increase the level of pH, as in chemical cleaning agents, experts recommend to rolling soda on a dry pan, and after cooling it to dilute it with water and pour into the drain hole.

ATTENTION, do not pour water in the pan with a hotbed soda, otherwise you can get a chemical burn.

When a serious break and unbearably terrible smell occurs, take advantage of the chemicals of cleaning sewer pipes. They contain sodium, softening the resulting bloom on the walls. However, when using these funds, be extremely careful, following clearly according to the instructions, so that the caustic chemical components are not driving the wall of plastic pipes. So before using the tool, familiarize yourself with the proportions and rules of application.

Such drugs are sold in a wide variety of variations, in the form of powders, granules, gels and liquids. Powdered preparations work slowly, therefore consumers give more preference to liquid components. They have a relatively equal cost, therefore it is important here to rely on the gentle influence of the means that does not destroy the polymer base of the drain system. You can recommend Tyret, Mr. Muskul and the famous Mole.

Observe the security technique

During working with any tool to clean the sewage, do not forget about safety rules.

Put on the hands of rubber gloves, as well as the respirator, so as not to provoke the burn of the skin and inflammation of the mucous membrane. Pour fluid into the drain hole of the sink slowly, without unnecessary splashes. Leave the solution to interact with deposits on the sewage walls to the time specified in the instruction. After that, rinse the drain system with plenty of water and scatter it with boiling water. Such an event will help you get rid of the blockage and completely eliminate the smells of the sinks.

Unfortunately, not all types of blocks and smell can be eliminated using folk and chemicals. Sometimes seals and corks in the waste pipes of the shell are so serious that only special mechanical devices can cope with them. Among them are a plumbing cable, a metal ribbon, a hinge spiral, etc. Externally, all these devices differ among themselves, however, in practice, they have one mechanism of impact - removal of a blockage and withdrawal of solid particle residues into a central sewer or septic tank.

If your house has no such specialized funds, you can use the steel wire. The main thing is that it is flexible and easily penetrated into all hard-to-reach places. When removing hair and pieces of fabric, use the hook nozzle.

Santechnic cable
Steel wire

However, the best fixture will be still a sanitary cable, thanks to a comfortable design. The spiral has good flexibility and penetrates all parts of the drain system, and the handle allows you to carry out rotational movements without slip by hand. In addition, you can always choose a model convenient for you, based on the characteristics and diameter of pipes.

Before you begin cleaning, do not forget to make buckets and rags, as well as put on your old clothes. Believe me, it's all useful to you. After the completion of the procedure, and the Racket, using for this.

Hydrodynamic installation - new solution problem

An unusual way to combat a blockage is the elimination of the plug with a strong water pressure, which pushes all the clogged particles outward. For these purposes, a special compressor operating from the network or gasoline is used. It provides a large stream of water in the pressure hose. Such a method helps to cope even with the extrastulums themselves.

When conducting this procedure, consider several important rules:

• water supply pressure and pressure;
• the amount of solid particles and scale scale;
• the material from which the sewer system is made.

Especially be careful when using this installation with plastic pipes. If plastic is low-quality and made of cheap polymer materials, then under high water pressure and mechanical effect, its fragile walls may not withstand the pressure and collapse.

Each house has its own characteristic smell. But it does not always be indoors smelling with pleasant detergents, refreshing agents or flowers. Not very good when an unpleasant smell of extends throughout the apartment. Perhaps she just clogged and requires cleaning. Many housewives do not know how to eliminate the smell of the sink in the kitchen, so we will look at the reasons for his appearance and what to do about it.

The main reason for which the unpleasant odor appears in the kitchen is the problems of sewage. The main function of washing is the removal of different types of dirt. The drain, mounted under the sink, is sent to the sewer pipes.

The causes of the sewage system malfunction can be referred:

• safon clogging. Siphon is a small curved part of the sewer. Its role in maintaining the water level inside the bend, as well as the separation of the air in the room and the sewer tube. Over time, in the pipe, a siphon due to poor care can form a fatty flight. Small particles of food waste sticks on it;
• enchanting sewer riser. This malfunction indicates a characteristic bugged sound inside the shell. In this case, only an employee of the housing can eliminate the problem, because this is a malfunction of the main system;
• mechanical damage to the drain pipe;
• contamination of the inner surface of the pipes by fats, the remainder of the food;
• the deformation of the corrugated pipe. Over time, the corrugation has the ability to stretch, blame. Such situations occur even with its proper installation. Due to stretching corrugations, water is unable to linger and merges directly into the sewer. In addition, it can return back;
• violation of sealing between such parts of the sewerage, like the riser and drain. This is the flames of installers of the sewer system. Quite often they do not worry about sealing and simply insert the corrugated pipe into the hole of the riser;
• evaporation of moisture from the hydraulic assembly due to non-use of the sink, the location of the heating pipes under the shutter. If the washing is rarely used, from the hydraulic assembly, which is formed in the bending of the siphon and prevents the spread of the smell of sewage, water evaporates;
• montage flaws (workers may incorrectly pick up the diameter of the pipe cross section).

Types of siphons of different types and the principle of their work

In addition to the main reasons for the appearance of the sink, it is necessary to take into account or more rare provocateurs of unpleasant odor in the kitchen:

• severe wear, cracking of plastic pipelines;
• fault of a siphon;
• improper design of the drain system at the bottom of the sink;
• holes on metal pipes of sewage.

What is the smell of sink danger?

The sink from the kitchen sink is not only a closer for the hostess, but also carries the danger of the health of the residents of the apartment. A person is able to recognize odors, which is considered a natural mechanism necessary for survival. The body determines the fragrance as "disgusting" only in those situations where the stench can harm him.

In the air, which penetrates the room from the sewer system, contains poisonous gases:

• hydrogen sulfide;
• ammonia.

These components explain the unpleasant smell from washing. Also in the sewage air contains methane. It is formed due to the decomposition of sewage drain. This gas does not have any smell, but still it remains dangerous. Long influence on the body of toxic gases threatens negative consequences.

The smell of the sink is not only unpleasant, but also dangerous

Important: methane, ammonia, hydrogen sulfide cause harm to respiratory authorities, can provoke a partial loss of smell. When influencing silent flavors on the nervous system, a feeling of increased anxiety appears. Sometimes they provoke nervous breakdowns, fainting.

Considering the foregoing facts, it is better to fix the problem with an unpleasant smell than harm to yourself and relatives.

Effective ways to eliminate sink odor

Remove the smell in different ways that specialists offer.

cable

If you get into the sewer of kitchen waste, the toothpicks are delayed fat, food residues, a plug is formed that reduces the bandwidth of pipes. Fat sticking, food provokes a rotten smell. Remove the tube will help the metal cable. It should be firmly captured by palm, slowly rotate and pushing further. The plug can push further along the pipe or remove from the sewage (in the case when the cable is equipped with a crochet at the end).

If the block is eliminated, the water current is normalized. Water must first be supplied with a thin flowing, then you can open the tap is stronger. It is necessary in order to make sure that the block is eliminated. It is recommended to turn on hot water. It helps to get rid of oily plates, stopper residues from the pipe walls.

Special cable for cleaning sewage after clearing system should be rinsed, wipe, lubricate with machine oil. These actions will prevent the appearance of rust on the product. Dry cable must be collapsed, put on storage.

Applying a cable for breaking blocks

Using a cantuza for cleaning

It is necessary to inspect the siphon. If the problem has triggered the grinding of corrugations, the incorrect installation of the structure is enough to install everything correctly and fix it. If the stench provoked a blockage, siphon and plums clean the vehicle. It should be new that was not used for cleaning the bath, toilet.

The drain hole of the washbasin is covered with a cap of the tub, pressed, then open the crane with hot water. After the cap is closed with water, you need to pull a stick to the adaptation handle several times. This is necessary to pump water up and down and the destruction of the cork formed in the tube. Then the Vanutuz is taken out to wash off the water remains water.

Disassembly, washing of siphon

Before proceeding with this action, you should substitute a bucket under the sink. This is necessary so that the water does not flow from the hydraulic assembly to the floor. Then we already unscrew the wrench or arms of the Cup-sump. If you have an unbalanced design, it means you need to remove the entire siphon. After all the water stalks, we start cleaning.

The pipe located behind the siphon is checked, cleaned if necessary. The siphon itself is washed with household chemicals (detergent for dishes, powder in dissolved form, washing gel). After such a cleaning, the siphon is collected, tested the tightness of the compounds, the position of the entire design.

Methods that will help eliminate a small blockage in the siphon

Sealing junctions

When the smell is triggered by the depressurization of the joint between the drain and the sewage pipe, its seal is required. The simplest way is the winding of a fum-ribbon, but a better solution is the use of special plumbing sealant ("moment", Tytan, Ciki Fix, Ceresit). It will prevent the appearance of mold, fungus, microorganisms reproduction.

To prepare the surface for applying sealant, you need to use acetone, alcohol, dry soft rod. Apply the sealant by means of a soft narrow spatula. The joints should initially wipe dry, degrease. Then the sealant is squeezed so that it covers the entire joint of one strip (without breaks). For alignment of seams, a spatula is used.

Sealants for joints of sewer pipes

Protection of the hydraulication from drying

To do this, it is enough to open a crane, plenty of water level in the siphon.

Disinfection with soda and salt

These folk remedies are considered good disinfectants that will help remove poor smell from the sewage. To do this, be filled with inside the drain hole of the sink, withstand 20 minutes, then rinse the sink by means of a large amount of water. You can use this method for prevention.

Soda + vinegar

To wash a simple break, you can apply soda + vinegar. The floor of the soda is poured inside the sewer flow, poured this mass with vinegar, and the hole should be plugged with a rag. The sewer must be washed after 20 minutes.

Note: To improve the smell indoors in the mixture, you can add flavored oil (mint, lemon, rose, lavender, etc.). Thanks to this simple way, the room will be pleased to smell.

Lemon acid

You can also apply citric acid. A large pack of powder is poured inside the drain hole, poured boiling water. Such a healthy remedy will help at home to eliminate the unwanted smell of the sinks located in the kitchen.

Remedies for removing the smell of pipes

Flushing with special means

There are many different household chemicals, which is released for cleaning sewage. Its goal is to eliminate plaque on pipes, dissolving blockages, disinfection, elimination of unpleasant odors. Extremely popular and effective means are "Mole", "Mr. Muskul", "Flup", "Potechan", "Tyr".

Means for disposal of blockages and prevention

We have already considered how you can remove the smell of the sink if it appeared in the kitchen. Now we will give you ways that will prevent the appearance of the vony from washing:

• it is impossible to read the residues of food in the sink;
• for prevention 1 time per week, pour into the pipe soda + vinegar;
• use personal protective equipment when cleaning the pipes Chem. means (gloves, glasses, bandage);
• each dishwashing dishes, wash the drain hole with hot water;
• with a long lack of home, pour a means to the sink to prevent evaporation of water in bending (sunflower or other oil). This is the perfect option for cottages;
• install a removable siphon;
• welcome the room if you use "Mole" and its analogues;
• do not use aggressive chloride for metal miles;
• install.

If the sink sink appeared, what to do you already know and therefore in most cases you can handle the problem on your own. It is not necessary to endure an unpleasant and fairly dangerous smell of sewage in the place where the whole family is going, and the housewife holds most of the day to prepare your favorite dishes for everyone.

Tweet

Eliminate the smell of sink in the kitchen by home methods or remove its special chemicals, such as antisatis, Sanfor, Tiret Turbo.

The unexpectedly emerged smell of the sink, which is in the kitchen, cause different reasons, to establish the nature of which is not always possible independently. It is advisable in such situations to invite a specialist to quickly cope with an unpleasant problem.

Possible reasons

A detailed inspection of pipes in the kitchen can help identify damage or insufficient tightness of the buttons. Uncomplicated defects can be eliminated independently by adjusting the place of pipe connection location, additionally applying a special sealant.

Checking the siphon can show that it does not comply with the standards having a shortened partition. This affects insufficient water shutter dimensions, which breaks away from the volume of incoming water. In this case, the siphon is replaced. In another type of device, a sudden appearance of the smell of a corrugated pipe that simply broke up during operation can provoke. It can be fixed in the desired angle with adhesive tape by planning the acquisition of replacement for the near future.

It is difficult to determine how the likely the reason for the smell is difficult to break the smell, although it is issued squating sounds. Only a qualified master will be able to help in solving the problem, as a serious examination of the entire sewage system will be required.

Knowing that due to rare use, the hydraulication can dry, causing the penetration of the smell, it is advisable with a long lack of a whole family to pour into it machine oil that prevents evaporation.

Often, odors cause a flare on the inner surfaces of the pipe, dirt, which accumulates simultaneously in the siphon.

Home Methods Eliminating Smell

Among the home reserves in the kitchen it is easy to choose substances and devices that can quickly help in the leveling of unpleasant aromas emanating from the slaughtered shell. The first reception traditionally becomes the use of vanza. If the zoom is serious, then to solve the problem how to eliminate the smell of the sink, other ways will be required.

1. Unscrew the flask of the siphon and rinse it.
2. Use a flexible string introduced into the pipe. With reciprocating movements with simultaneous rotation, the cable part of the garbage pushes further, and the part pulls out the outside.
3. It helps in some cases the usual salt, which is enough to fall asleep at an hour and a half into the drain hole, and then wash off a rather strong water jet.
4. It can be inserted into the hole of the drain hose, closing tightly with the cellophane, and put hot water under strong pressure.
5. Helps to remove contamination and knowledge of chemistry, that is, the use of neutralization reaction. For this, the soda, placed in the drain, is poured with table vinegar, resulting in foam. Hole half an hour closes tightly, and then everything is washed.

If it is a week to shed pipes a liter of boiling water from the washing sodom divorced in it (enough two tablespoons), then the problems of blockages in the pipes in the kitchen can be almost avoided for a long time.

Chemicals

From household chemicals there is an effectiveness of the following compositions - HomeStar, Tiret Turbo, Sanfor, Selena, Antisatus, Mr. Muskul.

Special tools focused on cleansing plaque and eliminating blocks formed contain enough aggressive components, so it is advisable to protect gloves when working your hand.

Funds of thick consistency, being more concentrated, quickly cope with raids and dissolve even complex blockages. They are placed in draining for a certain period of time according to the instructions, and then the pipes are washed with large volumes of water.

For reading required ~ 2 minutes

Mountains make a lot of work to get a comfortable cozy atmosphere in the apartment. Special attention is paid to the kitchen, because there is a cooking, cleaning dishes from pollution. In this room, unpleasant flavors often appear, which are gradually applied throughout the apartment. One of the reasons for such an unpleasant phenomenon is the zoom in the sewer system. From our article we learn how to eliminate the smell of the sink in the kitchen, consider the reasons for its occurrence and methods of struggle.

Save.

The reasons

Before choosing a specific method of eliminating an unpleasant smell, it is necessary to deal with the cause of its occurrence:

1. Score formation in the siphon. During the washing of dishes in the sewer system, fat, cereals, cleaning of vegetables and nutritional waste falls. Over time, these substances accumulate on the walls of the pipes or in the siphon, form traffic jams. The rotting deposits create an unpleasant fragrance, remove which only thoroughly clean the siphon will help.
2. The second popular reason is the non-permanent operation of the washing. A water shutter is not formed in the siphon, which should prevent the penetration of outsiders from the sewer system. If the plumbing has not been used for a long time for its intended purpose, the liquid will evaporate, and the smell will penetrate into the room.
3. Wrong mounting of the siphon.
4. Deformation of corrugations during operation. Over time, the tube changes its initial location, can prick or stretch. With this position, a blockage is formed or a complete drainage of fluid into the sewer, which interferes with the formation of the hydraulic assembly in the siphon.
5. The absence of sealing in the location of the riser and pipes. The corrugation is simply sticking into the drain hole after the siphon, the second end is inserted into the sewer.
6. Encouraging is accompanied by a characteristic bouffaging of washing. This phenomenon often occurs when the neighbors are installed on the sewer inputs of the plug on the sewer.

As we can see, unpleasant flavors in the kitchen can appear for various reasons. Next, learn how to get rid of the smell of the sink.

Save.

Relevance of the issue

The smell of washing is not only not pleasant, the substances entering the premises can affect human health. In the air, penetrating the room from the sewer system, contains harmful gases (ammonia, hydrogen sulfide and methane). The latter substance is especially dangerous, it is impossible to notice its presence, because methane does not distinguish the smell.

The prolonged impact of harmful evaporation leads to the ration of the smell, affects the breathing authorities. These gases act on the nervous system. A person appears a feeling of anxiety that can lead to nervous breakdowns.

Save.

Plumbing will help the diagnostics of sanitary equipment, but the specialist will have to wait long, and then pay for services. This option is recommended to use with serious breakdowns, most of the work can be made independently without special skills.

First you need to trace the work of the sink. If the fluid flows normally, but the smell does not disappear, rinse the pipe with hot water with detergents or a solution of vinegar and food soda. If such operations did not give the desired result, they will have to inspect the pipes and siphon for the presence of cracks, leakage. Perhaps in engineering communication there is a prove. When the moisture is found, the location of the docks is sealed or wrapped with fuma ribbon.

Save.

Methods of combating unpleasant flavors

Before you eliminate the smell of sewage in the kitchen, you need to deal with the cause of its occurrence. If all the connections of sanitary and technical devices are sealed, the unpleasant fragrance enters the room through the formation of blockages in the pipes. There are several methods for the destruction of traffic jams, read them in more detail.

Cable for cleaning

The standard steel cable will not solve the problem, it is necessary to use a special product with a hook and brush to destroy traffic jam. Its length varies within 3-5 meters, the handle is installed at the end to carry out rotational movements.

To remove a blockage in sewage, it is necessary to carry out the following steps:

• Remove the corrugation from entering the sewer system.
• Insert the cable into the pipe and start pushing it to the maximum depth.
• Rotating the handle and at the same time hold the casing.
• Such manipulations are carried out to contact the cable with a blockage. Next, the cork can be tried to destroy or stretch with a hooking.

After conducting procedures, the tool is thoroughly washed, its surface is lubricated with machine oil and put in a storage box.

Save.

Use of Vanuza

The specified device is used in the formation of deposits in the siphon, when there is no desire to disassemble the device. Next, we describe how to get rid of smell of washing with a vest. For this you need:

• install the cap on the drain hole on the sink;
• turn on the crane with hot water and wait until the liquid completely covers the cap;
• overlapping the valve and alternately move the handle of the tub, upward;
• after several such techniques, we pull the device, with a part of the sediments from the siphon should be in the sink;
• open hot water and wash the dirt.

Instead of a siphon, you can also use the remedies, such as a package from juice or milk. In such a container, we cut off the upper part, insert into the drain hole and act on the principle of the ventusion by periodic movements up and down.

Save.

If the reason for an unpleasant smell in the siphon, then this device can be disassembled. I pull out the corrugation with the transshipment of the sewage and we substitute the bucket, open the crane and pour water into the sink. If the fluid does not flow, it is necessary to disassemble the siphon. For this:

1. we substitute the container and carefully unscrew the cap;
2. we promote nuts and remove the corrugation, we remove the blockage;
3. the zifon assembly occurs in the reverse order.

At the final stage of the work, we check the tightness of the compounds. To do this, it is enough to turn on the water. If necessary, tighten the fasteners.

Save.

Fighting Vaults with Head Funds

How to remove the smell of sewage from the sink, if there is no necessary equipment at hand? Help this program will help:

• A glass of salts fall asleep into the drain hole of the washing and add 500 milliliters of boiling water. After 3 hours we turn on hot water.
• Mix the food soda with salt in equal proportions, pour out in the sink. After half an hour, we act on the mixture with boiling water. If the smell remained, we repeat the procedure or use more efficient methods.
• Pour in siphon 2 tbsp. Spoons of soda, then pour a glass of vinegar and overlap the hole with a rag or a plug. After 10 minutes we rinse the pipes with boiling water.
• We fall asleep into the draining the contents of the patch of citric acid powder, add a small amount of hot water. Chemical reaction should contribute to the destruction of the blockage.
• We use a special tool "Mole" according to the instructions on the package. This drug is more aggressive than citric acid or a mixture of soda with vinegar.

To eliminate blockages in the sink, other chemicals can be applied. They are bought in the household chemical store, use the manufacturer's prescriptions.

How to remove the smell of the sink in the kitchen? The best way is to prevent the occurrence of blockages. For this you need:

1. Use a special mesh to detain food waste in the sink. Do not pour in the sink welding or coffee thick.
2. After washing dishes, rinse the pipes with hot water. This will prevent the adhesion of fats in the siphon or in the corrugation.
3. Perform periodic washing service. Fall asleep into the drain hole soda with vinegar. Such operations must be carried out at least once a week.
4. If plumbing is a long time to inactive (the owners left rest), pour some vegetable oil into the siphon. Such a liquid does not evaporate, which will prevent the penetration of foreign smells from the sewer system.

Buy high-quality siphons that can be disassembled with your own hands. In this case, the user will be able to repair equipment without calling the plumbing.

Save.

Conclusion

There is a huge number of ways to get rid of smell in the sink, but before carrying out specific actions, it is necessary to identify the reason for its occurrence and choose the most effective means. The recommendations listed in the article will help independently solve the problem and achieve the desired result.