Rollers for decorative plaster and embossed surfaces. Tools for textured wall painting What kind of drawing will come out with a leather roller textured plaster

You started a renovation and decided to give the walls in your home an unusual look that creates a cozy atmosphere. Beyond the choice color scheme, you can give the walls an original texture.

Textured plaster can transform the look of your room. To do this, you will certainly need a special textured, aka structural, roller.

Data rollers from various materials(rubber, wooden, linoleum) in the range are presented on the shelves of hardware stores.

Rollers with a textured surface are used to apply relief on wet plaster, the depth of the relief should not exceed five millimeters. During operation, the roller itself must also be wet

But you can craft this tool The following materials are required for manufacturing: - a used but serviceable roller; - a clothesline or a thin cord (half a meter will be enough); - plastic bag; - scotch tape; - knife; - scissors.

Try on small area walls are several options with different decorative patterns and choose the most suitable one.

First option

Designer roller made of clothesline. Wrap the old roller with a piece of string or string. A roller made in this manner produces a regular pattern with clear lines. A distinct rhythm of texture is created, which you can control by making different amount passages.

The type of pattern can also be controlled by the thickness of the wound rope, the direction and frequency of the winding. This roller applies a pattern of depressions.

Second option

If you have a foam roller from past repairs, you can use it. The foam roller will create bumps in the pattern.

Use a knife to make a few cuts on the roller. Cutouts can be made with scissors. The wider the neckline, the wider the bulge that builds the pattern will be. On the roller, you can combine the types of cuts, you can also come up with your own methods of application.

A textured roller can be made with your own hands from a roller with a soft sleeve by tying the surface of its sleeve in several places with thread. Using a foam roller, apply the pattern with a knife

Exist a large number of facing materials, which are widely used today to create beautiful interior indoors. One of the most demanded finishes is decorative plaster. Many of its varieties are known, for example, textured painting of walls. To perform this work, a special roller is required, which gives the entire cladding a special texture. In this article, we want to tell you about required set the tool that is required to apply textured paint.

Varieties of rollers

If you go to the store to buy a textured paint roller, you may come across a wide variety of this tool. Therefore, we suggest you briefly consider its existing varieties. First of all, let's define what a roller is. A roller means a roller that rotates around its axis. As a rule, a metal base is used, on which replaceable rollers are put on. As for the roller itself, it can be covered with a variety of materials. To make it convenient to work with the roller, a special handle is provided on it.

If we talk about the existing differences of this tool, then here we can highlight the following:

1. Coating type.
2. Roller width.

So, when choosing a roller for painting walls, it is extremely important to build on these indicators. So, now let's look at the existing coatings that are used when performing different works.

Varieties of coatings

So, several types are known at once, the so-called roller coats. It is made from the following materials:

• Foam rubber.
• Threads.
• Velours.
• Textured or textured.
• Flock and others.

Consider the features of the most popular in the domestic market.

Fur roller

For wall painting, fur rollers are universal. They can paint the walls absolutely different colors... It can also be paints with organic basis... A number of positive sides such rollers. When working with them, moderate paint absorption is observed. As for the application of the paint itself, it lays down evenly. Therefore, they are very convenient even for non-professionals. It is also important that they do not spray paint on all sides. And if there are minor irregularities on the walls, then there are no special difficulties here either.

The fibers themselves on the fur roller can be made from different materials, For example:

• Natural fur. Natural fur fibers perfectly absorb paint, which contributes to an even distribution of paint over the entire surface of the wall. If we talk about the shortcomings, then it is the only one - during the painting process, the loss of villi is observed. And if you bought an inexpensive roller, then this can be a real problem, as there will be lint on the wall that should be removed urgently.
• Polyacryl. This is a perfect replacement natural fur, since such a roller is devoid of its disadvantages. And speaking for its merits, it is quite affordable cost. But the polyacrylic coat has its own characteristics. You can paint with such a roller only with paints on water based... Also allowed is the paint in which there is minimal amount aggressive substances. Plus, polyacrylic itself is short-lived.
• Polyamide. This material is durable. It also handles aggressive environments. As a result, such a roller is suitable for absolutely any type of paint. But there is one important drawback. When working, they are constantly splashing.

There are also some differences between these wall paint rollers. For example, a fur coat can have different pile lengths.

Advice! If the wall is rough, then it is recommended to choose a fur coat with a long pile. Due to this, you can paint everything with high quality paint.

So, regardless of what material the pile is made of, the roller needs care. And for this one should not apply any special efforts... For example, it is enough to soak it in water after work or in kerosene.

Foam roller

The foam roller is the cheapest. You can buy it starting from 30 rubles. Such a roller is used for water-dispersion paint. This is the paint that is used to process window frames or doors. Of course, the foam roller has obvious negative sides, including:

• Short operational period.
• If you start working with particular intensity, then be sure to wait for paint splashes in all directions.
• If the surface is relatively uneven, then it will be problematic to paint it qualitatively.

So, a foam roller for painting walls economical solution for a small area of ​​work. If you have to paint large area then don't even think about buying it. Moreover, it is not suitable for a wall covered with decorative plaster.

Velor roller

This tool allows you to apply paint in a thin and even layer. As a result, the painted walls will be smooth. But the end result will largely depend on how well the base wall preparation was done.

To work with a velor roller, you need special skills in painting the walls. A small defect in motion can lead to the fact that a defect will be immediately noticeable on the wall. Therefore, it is not surprising that such rollers are used mainly by professionals in this profile.

To be objective, this tool also has disadvantages. Velor itself absorbs a large amount of paint. As a result, you have to wet the roller much more often to achieve a good result. This leads to an increase in paint consumption.

Smooth surface rollers

There is another variation of this tool that has a very smooth surface. It is made from:

• Flock fibers.
• Polyester.

In the first case, flock fibers are made on the basis of polyurethane. The basis is fabric. This coating is highly durable. Due to this, a long operational period is observed. They are used to paint perfectly smooth surfaces.

As for the polyester tool, it feels like a synthetic winterizer. This roller has excellent positive characteristics, including:

• Perfectly absorbs paint.
• Perfectly conveys the tone of the paint to the wall.
• The likelihood of the transmission of lint on the painted wall is completely excluded.
• Long operational life.

So, here we have considered important features and the differences in the tool used for painting. Now we will find out the difference between a textured wall paint roller, which is used for textured wall painting.

Roller for decorative paint

By such a tool is meant rolls, through which texture, patterns and the like can be applied to the surface of the wall. There are two main types of it:

1. Textured roller. The required pattern is applied on its surface in advance.
2. Structural roller. In this case, there is also a three-dimensional pattern, but the task of which is reduced to applying a texture or pattern.

The texture of the wall can be created not only with a special tool, but also with ordinary rollers. So, you can use a special paint for decorative processing walls and roll a foam roller over it. The effect can be original. In fact, there are no strict requirements and rules here. You can experiment with different types coatings.

As for the embossed rollers, they can be made from a variety of materials: polyurethane, foam rubber and rubber. You should choose the one that will allow you to achieve the maximum desired result. Many people prefer polyurethane products, thanks to which you can give the wall an original appearance.

There are also original rollers based on leather and fabric. They are a tampon with folds. Their use allows you to achieve an original and non-standard texture on the walls. For example, some have learned to create the effect of marble and other materials.

Using a textured roller requires special care. When working, they need smooth and unhurried movements. It is also necessary to apply uniform forces to the surface so that the paint is evenly distributed over the entire surface. Also, due to this, the texture will be beautiful. But remember one important nuance, the textured paint is applied with a special spatula, and the texture is formed by pressing the roller.

Among other things, an additional set is required necessary materials for decorative painting of walls. To do the work with your own hands, you should prepare the following set of tools:

• Textured or textured roller.
• Brush in different sizes.
• Protective gloves.
• Mask to protect the face and respiratory tract.
• Rags.
• Sandpaper.
• Means for mixing paint.
• Metal brush.
• Disc brush.
• Thermal gun.
• Special trowel for applying a decorative layer.
• Spray.

It's worth noting that this is the main set of tools. And not the fact that you will use it all. However, all of these tools for painting walls can be useful to you to one degree or another. Moreover, some home craftsmen decide to replace the basic tool for textured wall painting with a homemade one.

You can take cellophane, leather, fabric, foam rubber or something else as a basis. It's good if you have a roller base. Any of the listed materials can be glued on top of it.

Conclusion

In general, applying textured paint to walls is a creative process that requires the use of your imagination. Although it is envisaged special tool to create texture on the walls, there is still an opportunity to experiment. You can try a wide variety of rollers to give the wall cladding some flavor. Of course, try it on a small sample first so you can test your know-how.

We hope that this material was useful to you and were able to figure out what kind of tool you need to apply textured paint on a wall. In addition to everything, we offer viewing of the prepared video material, in which you can clearly see how to use the selected tool correctly.

Use decorative plaster, how finishing material, a long time ago does not surprise anyone. This common type of decor is used in the design of apartment rooms or offices, as well as the front of houses or buildings. The result of the work is durability and strength. There are many dyes for every taste. Not only the master can cope with the paint, but you yourself.

TO good qualities you can also attribute the lack of seams on the walls, which makes the surface more refined. If you delve into the topic of decor, then you can talk about it for a very long time. For any plastering work you will need a special tool - a roller for decorative plaster.

Multicolored smooth walls- it is no longer attractive, and has gone out of fashion. The interior does not look original. It can help - a structural roller for decorative plaster, depending on the type, can make a variety of three-dimensional drawings on the putty.

How to make a roller yourself

Textured rollers for decorative plaster look like a regular roller, only on the main part there is a special application that allows you to make a voluminous texture or relief. Before you choose a painting tool, you need to decide which plaster is applied with a roller, and not with brushes or spatulas. Firstly, these are acrylic structural materials for outdoor and indoor use.

For the premises, you need to use Venetian or fine materials. To give the most beautiful effect, the granules must be small. Correctly applied relief will make the room look classy and individual. It is permissible to draw some elements of a pattern or painting. BUT different colors just do their job. Rollers for decorative plaster are divided into two types:

• depending on the type of material of the working surface of the tool;
• depending on the pattern that is produced on the wall.

How to make a roller with your own hands (video)

Types of rollers by material of the working surface

The characteristic of each roller contains:

1. Description of the material from which the tool is made
2. The effect that should be obtained
3. Properties plastering material, recommendations for correct use

Here we will look at how to apply decorative plaster with a roller. Removable rollers can often be found. They differ from each other - in length and diameter. The soft surface (coat) of the tool takes over the plaster. Harder and more elastic - leaves the pattern clear. These include materials: wood, plastic, foam rubber, rubber. Fabric and leather - they leave an indistinct imprint on the wall or facade. Types of rollers for decorative plaster:

Tip: when applying textured material, you do not need to put pressure on the tool. Movements during work should not be abrupt.

Types of rollers by the type of final drawing

In order to decide which roller to paint decorative plaster with, you need to consider its appearance, and not listen attentively to the name. Structural. When used, the spongy texture creates porosity on the surface. They are used for painting complex images and ornaments. Made of wood and rubber. Used for painting with a liquid solution already on the putty. The bark beetle texture is very popular.

Textured. Decorative plaster using such a roller creates a "fur coat" effect. If you paint with a roller with a looped pattern, you get an imitation of a stone. To form a marble pattern, use bamboo, nozzles or genuine leather. Decorative plaster is not painted on the surface with a roller, and at the same time the texture is formed. For the drawing to be correct, the applied layer of plaster must be thin.

Self-production of rollers with photo and video

Ways to make a homemade paint roller:

1. Wrap a stiff, wrinkled or twisted fabric on a smooth roller (photo # 1).
2. If the original tool has a lint, you can wrap the string around it. This will give a grungy effect. You can also cut polka-dot circles, this will allow the surface to be more delicate.
3. You can stick figures on a smooth roller. You need to fix it with varnish (photo # 2).

To make the drawing as high quality as possible, you need to round off all the attached parts. This will allow all elements to be completely immersed in the plaster layer. How much will such a roller cost? The price of a ready-made purchase will be 3 times more than a home-made one. Shop 700 rubles, do-it-yourself decorative plaster roller 150 rubles. To study the material, it is recommended to watch the video lesson:

For textured painting walls with a smooth and flat surface, it is convenient to use such construction tool like a roller. It seems that there is nothing difficult in using the tool. After all, we have all seen rollers, we all had to use it or watch how others use it.

However, it should be borne in mind that they are different types and are released for specific purposes. This can complicate purchasing decisions. That is why this article will be given practical advice that will help you in choosing this tool. And you will also find out what types of paint rollers exist, what to look for when buying, and what is the peculiarity of each of them. We'll take a closer look the right tools for textured painting of walls.

Some information about paint rollers

For all of us, this simple tool is not too clever. Its design is quite simple: the main part of the tool is a roller that rotates around an axis. The surface of the roller is sheathed with a material that absorbs paint, transferring it to the surface of the walls. In order to work it was simple and easy, a handle is attached to the axis - a clasp. And it is also practical that such a handle is not permanent, you can replace it for more convenient use.

The differences between paint rollers are basically two things:

1. Roller coating, which is called a fur coat.
2. The width of the roller.

Quality, convenience, as well as the finished result of the work performed depend on such factors. That is why we will consider all its types, so that your work is not difficult, but brings you pleasure.

Coat type

Nowadays, there are such types of this material:

• thread;
• fur;
• foam rubber;
• velor;
• flock and some with a flat surface;
• textured and texture rollers for decorative painting.

Fur

When painting walls, such rollers are universal, since any kind of paint can be applied with a fur roller, even paint made on an organic basis.

Advantages:

• the composition is qualitatively and evenly applied to the surface of the walls, which contributes to easy do-it-yourself work;
• absorb enough paint;
• when painting, the composition is not sprayed;
• great for uneven surfaces such as decorative plaster.

The materials from which the villi are made:

1. Natural fur . Such material contributes to good absorption of paint into the fibers and its distribution on the walls. The only drawback may be that the lint from time to time can fall out and be applied to the surface along with the paint. This often happens with cheap, low-quality rollers.
2. Polyacryl. The main advantages of such materials are their relatively low cost. Polyacryl is worthy replacement natural fur. However, it has a significant drawback - it is used for painting walls only on a water basis, and without any fillers with aggressive substances.
3. Polyamidite. Compared to the previous material, this type is more durable and wear-resistant. That is why you can use fur coats made of such materials for paints of any type. The disadvantage is that when painting the wall, the paint will spray more strongly.

Fur coats can have different pile lengths. If you need to paint a rough surface, choose a fur coat with a long nap, if you need to paint a glossy surface, use a coat with a small nap.

Advice! To ensure that your roller lasts as long as possible, take proper care of it. After each use of the roller, take the time to wash it well.

How to do it correctly? First, soak the roller in kerosene and then in plain water. If you used a wall paint roller water dispersion paint, the maintenance of the instrument will be even easier. In order to wash it, simply use a hose with a pressure of water.

Velor

Such painting is pleasantly done, as it is applied in a beautiful uniform layer. If the surface has been pre-prepared with high quality, then the painted surface will look completely smooth.

Often in hardware stores, sellers say that such a tool is intended for specialists. Why? Because with careless work, all defective spots will be visible on the surface. Another disadvantage is that the fibers of the fur coat do not absorb a large amount of paint, which will force you to regularly wet the roller.

Foam

The main advantage of this material is its price. For example, foam rubber products can cost from 30-40 rubles. Such rollers can be applied to walls with water-dispersion paint. Among the shortcomings, such moments can be distinguished: poorly stains uneven surface, short-lived, splatter paint. But, despite such minor flaws, this roller is not the worst option, especially when painting a small area. For example, walls in a kitchen or bathroom.

Rollers for decorative painting of walls

What does the concept of "decorative painting" mean? First of all, this is the application of patterns and drawings to the surface of the entire wall or to some specific place.

To do this job, there are two types of rollers:

Such a structured roller can create a beautiful ornament on your wall. The photo shows what the finished result looks like.

Advantages of textured finishing

When decorating walls indoors, it is worth presenting two varieties - the use of special textured paint or the use different technologies finishes. In applying the first option, you will have to go to hardware store and choose a special paint that contains acrylic components. When finishing, this paint is unevenly applied to the surface, thanks to which you can get a granulating effect.

Textured painting of walls has many advantages: you can do the work yourself, without having any special building skills, such a finish masks all irregularities well, the paint is not toxic, prevents mold, is resistant to mechanical damage.

There is another option for making the decor - painting the walls using stencils. Such a coloring is carried out with an aqueous emulsion substance. This finishing method has the following advantages:

• low cost of work;
• allows you to draw in those places where you like;
• a large selection of colors;
• the ability to do work with your own hands, etc.

Textured paint tools

So what do you need to paint your walls decoratively? These are the following tools:

It is clear that you will not use everything from this list. But these are all devices with which you can do the job. However, it also happens that there is no way to spend your money on various expensive rollers. What to do in this case? Do not panic, because in this moment you can show your imagination, and make your original design premises.

Using a homemade tool

In order to make a textured roller, you need to impose or glue pieces of foam rubber, fabric or cellophane onto a regular one. After completing this procedure, you can use such a roller to apply it to the water-based composition on the surface of the wall or ceiling. This decor option will look very original and aesthetically pleasing. You can also use a wire wound on a roller.

You started a renovation and decided to give the walls in your home an unusual look that creates a cozy atmosphere. In addition to choosing a color scheme, you can give the walls an original texture.

DIY textured roller

Textured plaster can transform the look of your room. To do this, you will certainly need a special textured, aka structural, roller.

These rollers from various materials (rubber, wood, linoleum) are presented in assortment on the shelves of hardware stores.
Rollers with a textured surface are used to apply relief on wet plaster, the depth of the relief should not exceed five millimeters. During operation, the roller itself must also be wet

But you can make this tool at home. For the manufacture you will need the following materials: - a used but serviceable roller; - a clothesline or a thin cord (half a meter will be enough); - a plastic bag; - scotch tape; - a knife; - scissors.

Try several options with different decorative patterns on a small section of the wall and choose the one that suits you best.

First option

Designer roller made of clothesline. Wrap the old roller with a piece of string or string. A roller made in this manner produces a regular pattern with clear lines. A distinct rhythm of texture is created, which you can control by making a different number of passes.

The type of pattern can also be controlled by the thickness of the wound rope, the direction and frequency of the winding. This roller applies a pattern of depressions.

Second option

If you have a foam roller from past repairs, you can use it. The foam roller will create bumps in the pattern.

Use a knife to make a few cuts on the roller. Cutouts can be made with scissors. The wider the neckline, the wider the bulge that builds the pattern will be. On the roller, you can combine the types of cuts, you can also come up with your own methods of application.
A textured roller can be made with your own hands from a roller with a soft sleeve by tying the surface of its sleeve in several places with thread. Using a foam roller, apply the pattern with a knife.

The third option

A very easy way to create delicate relief on plaster is to use a roller wrapped in a plastic bag. Secure the bag to the roller with tape. You can also wrap the roller with twisted tape or a twisted bag. The folds of the bag create a very subtle irregular pattern, and the number of passes by the roller changes it endlessly. Just like a plastic bag, you can use waste cloth, vegetable netting, thick hair ties, leather straps, and tough crumpled paper. It is also very interesting to experiment with different material combinations.