The design of various flower beds in the suburban area must be approached thoughtfully. It is advisable at the preparation stage to develop a site plan and select the most advantageous options for the configuration of future plantings with the distribution of color spots. This will prevent mistakes when buying seeds of ornamental plants.
Flower bed design - the basic principles of creating a flower garden (photo)
When developing a picturesque flower bed, one should be guided by a number of rules for its rational design and understand the terminology. Basically there are two groups:
- Flower beds that have a regular shape with strict geometric parameters;
- Varieties of flower beds of any, sometimes the most unexpected configuration.
Flowerbeds in geometric shapes - simple and beautiful
Development of a flower bed project in the country
At the stage of project development are guided by specific principles:
- Integrity. To create a harmonious image of the future design of a summer cottage with the help of plants, you should consider the shape, color combinations, and the need for fencing.
- multi-tiered. The dominant role in decoration belongs to flowers, so it is important to ensure an overview of each plant. Low-growing varieties are located from the front edge or around the perimeter.
- Thoughtful scheme. There are many options for creating flower beds. It is important to organically fit the selected type of flower bed into the surrounding landscape.
Flower beds and flower beds in the country (photo)
When planning the design of a summer cottage on your own by placing flower beds on it, you should analyze information about the dominant varieties of such a landscape element.
flower border
A flower border is a picturesque narrow ribbon of beautiful plants. It is placed along the tracks or serves as the boundary of functional areas. Not infrequently used to mark borders or large flower beds.
Most often, low compact plants are used for planting, which are great for this purpose. In addition, they take root better in the ground, without requiring special care.
Rabatka
The flower bed of the rabatka is a traditional variety of a flower bed of a strict rectangular shape. Plants are selected in different shades or prefer a single-color background. Planted varieties can have different variations both in shape and in height.
Mixborder
Used to decorate the space along the walls of buildings. A well-chosen floral ornament will give a charming look to even the most inconspicuous building. In this case, it is allowed to plant different varieties of flowers and plants, the care of which is not particularly difficult.
The dominant option for mixborder beds is the selection of ornamental crops that provide continuous flowering. Making such flower beds in the country with your own hands is very simple, since this does not require any special skills.
Do-it-yourself mixborder - fast, simple, beautiful
vertical flower bed
A vertical flower garden allows you to beautifully and rationally arrange small areas. Attracts a vertical flower bed in the country with original design and many options for compositional solutions.
Interesting shapes can be obtained using wire mesh frames covered with film and filled with a soil mixture. These flower beds look good up close.
Another simple, but quite interesting option for creating a vertical flower bed is obtained using pots of different sizes.
To fix the pots in a vertical position, a metal rod (reinforcement) is used, which is threaded through holes pre-drilled in the bottom. 
carpet bed
Usually, such flower beds are located against the background of pebbles, lawns, sandy areas, but they can be placed in any other place, the main thing is that the carpet bed in the country house harmoniously fits into the general one.
Guided by the ideas of experienced designers, it is possible to create interesting ornamental twists that create the feeling of an expensive carpet spread out in the yard.
Fences for flower beds - the best options
A simple technique for enhancing the decorativeness of flower beds is the installation of a fence around the perimeter, which allows you to accurately emphasize the configuration of the flower garden, keeping the soil from slumping throughout the growing season.
stone fence
To get an aesthetic fence, the simplest option is to lay out sufficiently large cobblestones of various shapes in a shallow groove dug along the perimeter of the flower bed. It turns out the finished design of the flower garden, which for a long time retains an aesthetic neat appearance.
Stone walls look spectacular, allowing you to raise the flower beds above the surface. For their implementation, stones with the largest dimensions are placed in the trench, filling the voids with soil. Then lay out several layers of smaller cobblestones, fastening them with cement.
Advice! Of particular expressiveness are stone placers enclosed in a mesh structure made of wire. They need to be performed at heights and arranged along the edge of the rabatka. Such a composition looks elegant and serves as an additional decorative element that does not lose its attractiveness even in the absence of vegetation.
Flowerbeds of stones of different shapes and sizes go well together
Interesting ideas for a flower bed with your favorite plants
Wooden fences for flower beds
Wooden fences do not require special efforts during installation. Such a decorative fence looks beautiful and modern, but there is also a drawback, in our climatic conditions it is not durable.
Ideas to inspire you
- You can get an interesting fence by digging dies of different widths around the perimeter of the flower bed. For these purposes, round chocks will also fit.
- An interesting effect is created by mugs dug up to half the diameter, sawn from a log.
- To create a decorative fence, pegs and trimming boards are often used. If desired, wood elements are sanded, varnished or painted.
- You can find application for long edged boards. They are attached to the sides of flower beds of a rectangular, triangular, trapezoidal or square laconic shape.
It is easy to put together a fence from the remains of the picket fence, creating a variety of smooth or pointed lines along the upper cut. Willow wicker railings add a retro touch.
plastic fencing
Well-preserved plastic has gained recognition in the implementation of enclosing structures around flower beds. They are easy to install, and the color variety allows you to choose the right shade.
More often they use tape options - they are flexible and easily repeat the bends of the created flower garden. Fix curbs in shallow trenches. You can pick up interesting textures that imitate brick, stone, wood.
Metal fences for flower beds
A special color is created by openwork forged structures. Such fences perfectly set off the greenery of vegetation, enhancing the decorative effect of flower beds.
It is important to think over the overall compositional solution, providing for lanterns, bench legs or veranda railings that match the style.
Do-it-yourself concrete fences
When creating a flower bed at the dacha with your own hands, assuming its long-term use on the site, a concrete fence is created.
For him, a formwork made of a flexible hardboard tape of the desired height is installed on the sides in a shallow trench dug around the perimeter. The width is supported by spacers. It remains to pour concrete and wait for it to harden.
Flowerbeds without fencing
The simplest option is a flower bed, performed without additional fences around the perimeter. The dug up soil is laid, creating the desired shape, so that it rises above the surface. You can make the center or background more elevated.
For such structures, it is difficult to form a straight line, as the soil crumbles, begins to fall off after watering. A flexible curb tape, which is placed in a groove dug along the perimeter of the flower garden, allows to solve the problem and covered with soil. The line is clear and stable.
Flowerbed of tires
Durable mobile flower beds are easily created in old tires. They are arranged in a different order, creating interesting multi-row flowering structures.
Craftsmen carve original figurines, flower pots from obsolete tires, which are painted or painted with ornamental patterns. Such options become a magnificent decoration of the site.
A simple idea for a bright mood
Hanging flowerbed-planter from tires
Bottle flower beds
Waste material becomes a source of incredible ideas for decorating the landscape. Let's learn how to make a flower bed out of bottles.
- A variety of bottles - glass, plastic, are simply instilled upside down, getting a flower garden fence reflecting the sun's rays of any, the most extravagant form.
- An interesting line is obtained from plastic bottles with cut off tops. They are put into each other and placed on their side in a shallow groove.
- If it is possible to collect the required number of plastic bottles of the same diameter, then, after cutting off the upper part, the soil mixture is poured into them and compact plants are planted. Such stylized pots, slightly deepening into the soil, are placed close to each other along the perimeter of a flower bed raised above the surface.
Advice! When creating flower beds from bottles with your own hands, choose brightly flowering or herbaceous varieties of plants.
Beautiful flower beds with your own hands + photo
Modern design options for flowerbeds of unusual shapes give the landscape an individuality, enliven it, fill it with a feeling of comfort and celebration. Let's consider what flower beds from improvised material can be organized in the country with your own hands.
floating flower beds
Among the hits of landscape design in recent years, floating flower beds stand out. Their equipment needs a pond. If desired, its role can be played by a bathtub filled with water or a children's pool.
- A floating flower bed will require a lightweight material, such as polystyrene foam, that can not sink along with flower pots attached to its surface.
- It is possible to make recesses on a floating island, where soil is poured, and low compact plants are planted.
- The banks of the reservoir are covered with pebbles. This material looks especially impressive after staining.
- Complement the overall picture with plant groups, a comfortable bench and an elegant table.
Flowerbeds on the water do not require special care
Flower garden on the water
Advice! A bath or other container of water can be decorated with aquatic plants grown in pots. They are installed directly into the water, creating interesting compositions.
Flowerbed Design - Butterfly
With a little effort, you can place a magnificent multi-colored butterfly on the lawn.
- Pre-develop a scheme that allows you to maintain the clarity of the lines and the symmetry of the pattern being created.
- The butterfly configuration is marked on the surface with a wire, and then soil is poured and flowers are planted.
- A flower bed imitating a flying butterfly looks unusual. It will require a special design, which is lifted onto a support from the front side. Usually pots with already blooming plants are installed inside.
flower streams
Fantasy and stunningly beautiful flower streams captivate with graceful weaves and curves, fascinate with a rich palette of shades.
- To create a stream of plants, any elongated containers are used - pots, tubs, small barrels. They are laid on their side, dropping if necessary, so that the neck touches the earth's surface.
- Pour the soil mixture inside. The windings of the future brook are marked from the neck. Dig it up, adding soil if necessary.
- Plants pick one color or create a riot of different shades. They are planted directly in the container, and also fill the channel.
At the flowering stage, an incredibly wonderful decorative element appears, attracting attention and decorating the surrounding landscape.
Incredibly beautiful and picturesque look bright undersized varieties of flowers
Surprise and please with its beauty such a flower bed - a stream
wood aesthetics
Original compositions are created from a thick log laid on its side.
- To do this, a part of the wood is selected from him, making a deepening sufficient for planting flowers.
- The bottom of the log is covered with a film, on top of which the soil is poured.
- It remains to plant the plants in the soil abundantly watered before this. A flower bed from a log with your own hands is ready.
Stumps or vertically thick logs will serve well. A recess is made at the top in the center, where a container with your favorite flowers will be placed. Climbing plants look especially impressive.
Flower beds from old things (photo)
It is possible to give an unexpected fresh look to the site with the help of obsolete things. They are inspected, if necessary, polished, varnished or painted. You can apply interesting patterns, ornate inscriptions, draw images of animals, butterflies, insects.
What can you make a flower bed in the country (photo)
- They use old suitcases, chests of drawers, wheelbarrows. It remains to cover the bottom with a film, and fill the soil.
- It's even easier to set up pots of flowering plants that can be changed to create new color vibes all the time.
- Chairs, open umbrellas, pots, buckets, watering cans, shoes will be useful for exclusive flower beds.
- They are used after a small restoration of beds, bicycles, baskets, bathtubs, tubs and barrels.
An interesting idea - a palette with beautiful annual flowers of different colors
The activity to develop the image of a future flower bed in the country, designed to decorate the summer cottage, allows you to put into practice your own creative ideas. The result is the creation of an unusual design of flower beds that transform the most modest landscape.
We hope that our ideas, tips, real photos of flower beds in the country have helped you. And remember, if you want your garden to be beautiful, it is important to invest in its design not only strength, but also soul.
Do you want to decorate the site with original garden beds, but do not know where to get ideas from? Here you will find the best examples of flower arrangements that will transform your garden in a matter of moments! We will tell you how to make a beautiful flower bed with your own hands, give examples and several master classes with photos.
A do-it-yourself flower bed is one of the best ways to decorate a site, add originality and expressiveness to it. A beautiful flower bed will become the most attractive corner of your yard and, perhaps, even a kind of link that unites the house, garden, plants and outbuildings into a single harmonious composition. You can use absolutely any materials, even the most unusual ones, to make flower beds.
Regardless of the attractiveness of the flowers, a flower bed that does not have a fence will look unfinished. The fenced flower bed will immediately change, become more accurate. Such fences, by the way, are necessary not only to mark the boundaries, but also for many other purposes - for example, they prevent the spread of plants (especially ground cover plants) around the site. In addition, the sides protect fragile shoots from pets walking around the site.
Of course, today ready-made forms and fences for flower beds are sold, made of wood, stone, plastic and even metal, however, after construction / repair work, there are always surpluses of building materials, pipe cuttings, wood, pieces of bricks - in a word, everything that you want can be used to make lovely flower beds. For example, the remnants of linoleum or metal tiles can serve as fences.
Polyethylene packaging is a real problem for a responsible summer resident. The solution may be to use plastic bottles to create flower beds. This solution is recommended for areas where there are a lot of moles - the bottles from which the flower fence is made will become a serious obstacle for pests. You can even alternate bottles of different colors to make the composition look more colorful.
Note! Before digging in, it is advisable to fill the bottles with sand or soil - so they will not deform and become more stable.
New life for old things - we use improvised means!
People often transport unnecessary things to the country. Various chests, boxes, chairs, shoes and clothes - all this is living out its last days here to finally dry out or burn in a fire. But from old things you can also make beautiful and original flower beds!
Some flowers spend the winter in the apartment, and they are transported to the site only in the summer. But they do not have to be planted in the ground - you can leave them directly in the box, and then, when autumn comes, move them back to the house.
More boxes can be used to create vertical flower beds. Conditions like these are ideal for hanging crops and succulents. You can hang these designs on a wall, fence or other vertical surface.
If you have drawers from old chests of drawers or nightstands lying around, do not rush to send them to the landfill - instead use them to organize a compact flower bed. The color and shape of the boxes can be different, as well as the general style. But all of them will be harmoniously united by colors.
Sometimes even seemingly useless things like old shoes can find a new life. You can plant flowers there, and then hang your shoes somewhere (even by the laces). At the same time, the older the shoes, the better - there will certainly be no stagnation of water in leaky shoes.
Another option for creating an original flower bed is to use an old iron cage. Plant climbing crops in it and hang it on a tree or inside a gazebo.
Very unusual flower beds are also made from glass wine bottles. This is guaranteed to wow your guests! But be careful when separating the bottom, otherwise you can cut yourself.
A small but very functional flower bed can be made from a piece of burlap. Make a bag out of the material, hang it, for example, on some kind of pole. Tellingly, it is suitable for both flowering crops and fragrant herbs (you can add the latter to tea directly from the "bed").
To create a flower bed, those things that just lie on the street can also be used. A striking example of this is a dilapidated log. Take it, cut a longitudinal recess and plant flowers there (this option will be described in more detail below).
A stump that could not be disposed of can also turn into a flower bed. Tie pots to it with wire, plant spectacular falling flowers there.
But another option is a milky river, as if pouring out of a can. But in this case it is very important that the green background is solid.
Is your old bike no longer a means of transportation? But you can turn it into a highlight of your garden! Paint it, and instead of the trunk, install such a container with flowers.
The next example is already a complete composition. Combine old garden tools with flowers, experiment.
A massive stone vase will also look good in the form of a flower bed. Alternatively, you can use a large clay pot for this purpose (this one can stand in the open for several seasons).
Today, mailboxes are almost never used, but you shouldn't throw yours away! Make such a compact flower bed out of it and hang it on the gate.
Video - Making flower beds from old things
Master Class. DIY vertical flower bed
Vertical beds have become increasingly popular in recent years. Consider a small step-by-step instruction for making such a flower bed using multi-colored flowers. The best option for composition is, of course, .
For work, you will need the following consumables:
- wire mesh;
- plastic ties;
- soil mixture for flowering crops;
- large flower pot;
- strong cellophane.
After preparing everything you need, get to work. For the convenience of visitors, the information is presented in the form of a table.
Table No1. Instructions for creating a vertical flower bed for the garden.
| Steps, photo | Description of actions |
|---|---|
| Take the wire mesh and make a cylinder out of it, which will serve as a vertical base. Use plastic ties to fasten the edges of the mesh. Place the resulting cylinder into the flower pot. |
| Take strong cellophane and wrap it around the wire mesh. |
| Using the same plastic ties, attach the edges of the film to the vertical base. |
| Fill the resulting form with a pre-prepared soil mixture for flowering crops. |
| Also fill the flower pot with soil (this will make the wire mesh more stable). |
| Cut holes in the film for planting flowers. Be sure to do this in a checkerboard pattern. |
| Plant flowers in the holes, then carefully water. |
| Also plant a few plants on top (also water them afterwards) to make the composition look complete. |
| Water the finished vertical flower bed regularly, fertilize in a timely manner. In this case, it will look the same as in the photo (or even better!). |
wire mesh prices
wire mesh
Master Class. Flowerbed "Palette" do it yourself
We are all artists at heart, and therefore the creation of something beautiful (including an ordinary garden flower bed) must be approached creatively.
To make such a flower bed yourself, first decide on the flowers that will decorate it.
In addition, you will need pots in which the seedlings will be transplanted and where they will bloom throughout the summer.
Also prepare a rake and a shovel - they will also be required.
As a base, you can use a sheet of plywood, foam (not recommended, because the material is light, it can be blown away by the wind) or a furniture board.
To fix the base, prepare the clamps in advance.
You will also need paint or stain, varnish.
So, for starters, take the base and draw a palette on it with a marker.
After that, cut out the shape with a jigsaw.
This is what the finished base should look like.
After that, make fasteners. The example drawing below shows what they should look like.
For the manufacture of flower bed mounts, use the bars.
Using clamps, attach the fasteners to the base of the future flower bed.
Using pipe scraps, you can make stands for rakes and shovels.
After that, decorate garden tools - for example, paint them with polka dots or paint them in one color.
Then take the base of the flower bed and, if a furniture board or plywood was used in the manufacture, cover it with stain, and then with varnish.
Wait for the coating to dry and install the flower pots. That's it, the beautiful flowerbed "Palette" with your own hands is ready!
Video - Making a flower bed from a wheel
Master Class. Flowerbed "Turtle" from car tires with their own hands
We offer another interesting option for creating a beautiful garden flower bed. Step by step instructions are given below.
Table number 2. Instructions for making flower beds "Turtle".
| Steps, photo | Description of actions |
|---|---|
| The finished flowerbed of tires will look something like this. |
| To get started, prepare: - tires with spikes (2 pcs.), always one without steel cord; - screwdriver; - paint for external works, brush; - self-tapping screws 3.5x55 mm (15 pcs.); - big knife. |
| In a tire that does not have a steel cord, cut out the bead on both sides and cut it into four identical fragments. |
| As a result, you should get such elements from which paws will be made. |
| Cut out a pair of rectangular sections on each of the blanks. |
| As a result, the workpiece should look like this. |
| The second tire, from which the torso will be made, may be slightly larger. Mark it into six identical parts, make cuts at the border of the sidewall and tread - one narrow (for the tail), one round (for the head) and four wide (for the paws). |
| Insert the pre-made paws into the appropriate slots, fix each with two self-tapping screws. |
| Here's another photo from a different angle. |
| Connect the edges of each paw as shown in the image: on the one hand - with a self-tapping screw, and on the other - with a wire staple (similar to a stapler). As a result, near the body, the paw will be narrow, and on the other hand - voluminous. |
| Take a piece of tire, make a tail out of it and attach it with the same self-tapping screws. |
| You can use a spray bottle to make the head. |
| The hole for the head you made earlier should be such that the head itself is at a 45 degree angle. Fasten the bottle with a self-tapping screw (it must go through, as in the image). |
| When assembled, the flower bed should look like this. |
| Paint the flower bed (you can use two colors, as in the example). Protector elements can be used to emphasize the texture of the turtle. If the tires are "bald", come up with your own pattern. |
| Color the head too. The turtle, as you can see, smiles contentedly. Everything, the flower bed is ready (just wait until the paint dries)! |
Flower beds from annuals - schemes
Flowers for flower beds are selected according to color, varieties and many other factors. And to make flower beds from annuals, the schemes of which you will find in, on your own, you do not need to have the skills of a landscape designer. The main thing is to calculate everything correctly even before the start of work and familiarize yourself with the basic rules for creating flower beds.
Master Class. DIY log flowerbed
To make such a composition, you will need the following consumables:
- log (diameter - 40-50 cm, length - about 200 cm);
- flower seedlings;
- gravel;
- primer;
- film.
In addition, the work will need:
- simple scissors;
- chainsaw (can be electric);
- wooden hammer;
- bit.
So, everything is ready, you can proceed directly to work.
Table number 3. Instructions for creating a flower bed from an old log.
| Steps, photo | Description of actions |
|---|---|
| First, peel one side of the log from the bark (this is where the chisel will come in handy). |
| Make cross cuts on one side of the log in increments of 50 cm and a depth of about ¼ of its diameter. |
| Cut off part of the log from the side where the cuts were made so that the result is a longitudinal surface. |
| Make cuts on this surface as shown in the image. |
| Using a chisel, remove the sawn pieces of wood and make a kind of "trough". |
| Cut the film with scissors in the shape of the resulting “trough”, and then lay it down. |
| Pour gravel over the film, and a thin layer of fertile soil on top. |
| Plant seedlings of flowers and enjoy the resulting beauty! |
Wood primer prices
primer for wood
Master Class. DIY floating flower bed
A floating flower bed is a kind of plant island moving around a pond. It looks amazing, and making such a flower bed at home is quite simple. In fact, this is a plastic or wooden base with a sealing mesh laid on top and soil for planting flowers. Instead of soil, you can even use pebbles or hydrogel, but it is important that there are already aquatic inhabitants and other plants in the reservoir (they indicate the presence of nutrients).
What plants are suitable for this? In principle, any, but be sure to take into account the swimming ability of the structure, because too large plants can easily flood the island. Also note that it is better to give preference to crops that love moisture (sedge, lilies, papyrus, colorful potted flowers or ornamental grass).
First, decide what material you will use in the manufacture of the island. Determine the dimensions yourself, as well as the depth of immersion (preferably somewhere around 7 cm from the bottom). Please note that the soil should not be eroded by water. Use gravel to adjust the diving depth.
- A ready-made pallet (or, alternatively, a mesh pot) can be bought at the store.
- Also, the container can be made from boards (you get a small box with holes), treated with impregnation to protect against moisture. Such a box must be covered with spunbond or geotextile, and then covered with a drainage layer and soil.
- The third option is to use plastic bottles. They must be cut, holes made at the base, and then covered with the same geotextile.
It is quite obvious that a container filled with soil will not float by itself - for this it is necessary:
- cut out of the packaging foam (this remains after the purchase of household appliances) rectangular frames that will hold the island on the surface (they are attached to the top of the flower bed, and not to the base);
- foam the perimeter of the flower bed and its upper part with mounting foam;
- make a pontoon out of plastic bottles along the edges of the island;
- use an inflated car camera.
What about floating flower pots?
They can also be launched into the water, but the reservoir must be small and always without aquatic inhabitants. For example, you can cut out a base for flower pots from foam, as in the image below, which is necessary for stability on water. However, such floating pots will have to be watered regularly.
How to decorate a floating structure?
- You can mask the unattractive edges of the island with earth, moss or branches.
- You can also install LEDs on such a flower bed, the operation of which is controlled using a remote control.
- Finally, you can put figurines of animals or birds (for example, a ceramic stork) there.
Note! Before launching a floating flower bed, it must be tested without fail! If it is unstable, then it should be improved. Also keep in mind that flowers will grow, which will change the balance of the island.
Master Class. DIY flowerbed of old chairs
To make such an original flower bed, prepare:
- old chairs;
- paint in cans;
- sandpaper.
All other materials depend solely on your imagination. You can, for example, use a wooden box instead of a pot. In any case, first remove the old paint from the chairs and carefully sand them down.
Clean the chairs from dirt and dust, then paint. It is quite obvious that it is better to do this on the street, because there is no doubt about the toxicity of the paint.
You can also paint the flower pot if needed.
When the paint is dry, you can paint the chairs. We advise you to use the acrylic paints that come with the paint-by-numbers kit for this. These are not washed off, and varnishing is not required.
Thanks to such original flower beds, it is quite possible to compose whole compositions.
This one, for example, is made from old shoes and children's sneakers that no one has worn for a long time.
Flower bed from an old bicycle
As you can see, you can make a beautiful flower bed with your own hands, and there are really many options. We hope that the master classes offered here will help you with this!
Video - DIY stone flower beds
A flower bed is a real decoration of any home and garden plot. It adds charm and sophistication to the environment. There are many options for creating a beautiful and even unusual flower bed. Many will prefer the challenge of a landscape designer, but you can create natural beauty with your own hands. Read about unusual, vertical, bottle and other flowerbeds in our article below.
A flower bed pleases with its appearance and brings aesthetic pleasure. Over morning tea on the veranda, the gaze falls on a beautiful floral ensemble. But to create it, you need to work a little. First of all, you need to choose a place for a flower bed: in front of the gate, behind the house, near the gazebo or along the paths. Where on the site is there space suitable for flower plantings? Measure out the area.
Prepare the material that will be used to decorate the flower bed: tires, stones, wooden stakes, mesh, etc. For a harmonious design of the flower bed, you first need to draw a planned sketch. It will be easy to navigate through the plantings and construction.
The most important thing in the formation of a flower bed will be the selection of land. You need to choose as much land as you need for planting flowers. If this is an alpine slide, then the amount of soil should be poured with a margin. The soil of the flower garden should be fertilized, the plants on such land will quickly take root and will delight the owners and their guests with their beauty.
A beautiful flower bed with your own hands, step by step with a photo
Almost every gardener dreams of a beautiful flower bed, but not everyone succeeds. On our site you will find beautiful compositions that even the most inexperienced landowner can reproduce. See the selection below.
round flower bed
Select a conditional space, which will later be filled with colors. Dig it up, fertilize it, and then plant it in rows around the circumference, starting from the edge and ending towards the middle. So you can understand whether the composition will be placed evenly.
Between the rows of flowers, you can plant herbs, undersized shrubs, various flowers in color, bud shape. In the future, the flower bed can be supplemented with beautiful figurines or new landings. For example, as in the photo below, the flower aisle is replaced by a pot planting of petunias. The central place in the composition is occupied by a tall shrub.
oval flower bed
For an oval shape, the territory is prepared in advance. Soil, small stones, framing material are planned in advance in the right amount. First, we dig up the ground, form flower beds, plant flowers and frame them.
Now it is the turn to cover the bare areas of the earth with small stones or the remains of the processing of wooden structures. As a necessary material, pebbles, stone chips or ordinary wood chips will help us. At will, the territory of the flower bed is decorated with figurines, lamps. After some downtime, the flower bed can be disbanded. Remove the slate fence and put stones in its place.
floral ensemble
Beautifully planted flower beds look very harmonious, but beautifully located ones add zest to the ensemble of flowers. A flower bed of several small flower beds will be amazing in any yard. This will simultaneously complement the space for observing natural beauty. The territory of the flower bed can be located next to the gazebo, swing, in the home garden.
Prepare the borders on the plot. The flower beds should be located within the boundaries of the circle. One part can be decorated in one color, the other in a different shade, and the combination of colors can also be alternated. The flower garden should be located on a small elevation, for this it is framed with slate or wooden planks, like a supporting wall.
Subsequently, containers with a wooden support are filled with earth and flowers. The following year, they can be disbanded, for example, to allocate high beds for growing vegetables. But, if the desire to arrange a new flower arrangement remains, continue decorating your yard.
DIY stone flower bed, step by step with a photo
It would seem that flowers and stones are an impossible combination. But in our case, be sure that you get a great composition.
stone bed
Stone flower bed - perfect for any site with a slope or even location. The plowed place is pre-marked with masonry. We make the so-called stone sides around the perimeter. Between the allocated space we make stone borders, we will combine different flower studies. Fill the free space with a small stone.
We decorate the center of the flower bed with a large boulder or a group of large stones. Flowers are selected according to climatic conditions. We also think over the tone combination in advance. Equipped stone flower bed will last more than one year. After a while, you can raise it or make a transition between tiers.
alpine slide
Alpine slide - harmoniously fit into any area of the garden. In the shade, near the barbecue or gazebo, a beautiful stone flower bed will delight with its beauty. The essence of such a hill is a stone fortification. The formed heap of earth is reinforced in tiers with stone cobblestones. The lower tier is laid out with a stone of the largest size.
Further, the stone bed is divided into zones. Often in such plantations several types of plants are used at once: flowers, herbs, shrubs, trees. Each growth is separated by a stone path. A free piece of land can also be sprinkled with a small stone.
DIY flowerbed for beginners
You can break a beautiful flower bed under the kitchen window, in front of or behind the fence, in the garden, near the sidewalk paths or between them. Let's make a simple flower bed, without stone thresholds and wooden supports. In the selected area, mark the place where the flowers will be located. If it is a lawn, remove the grass top.
Dig up the soil. Dig flower holes or plant seeds. To begin with, a flower bed can be planted with one variety of flowers, so it will be easier to care for them. If you wish, then choose the same type of varieties that have a simultaneous similarity. Further, the number of varieties can be increased. To complete the flower bed, you can use a small fence.
As a result, water the flower bed abundantly. You only need to do this after installing the fence. Until the completion of the work there is no point, otherwise you will be smeared with mud. In addition, when installing a fence, plants can be damaged.
Do-it-yourself vertical flower beds, step by step with a photo
Vertical flower beds save a lot of space. On the garden plot, it is important to choose a place to place the planting. A high flower bed usually catches the eye from the first minute, so you need to plant lush, bright or even curly flowers in a container.
flower bed made of plastic pipe and aluminum mesh
One of the successful examples of a vertical flower bed is a flower garden equipped with a large-diameter plastic pipe, a sewer pipe with a diameter of 150 mm and a chain-link mesh. The mesh is rolled up into a tube, the ends are fastened with pieces of aluminum wire or plastic clamps.
On top of the mesh is wrapped in a black or green film, it is this color that will be in harmony with the planting. The interior is filled with earth. Punctures are made on top of the film through plastic, so that a plant can be placed in the hole. Instead of a pipe, several pots can be taken. Flowers are planted, and the finished flower bed is transferred to a permanent place.
flower bed of pots
A flower bed made of pots, made on a vertical basis, is great for both indoor and outdoor placement. The fixing base in this case can be different, from a metal or wooden rod to a rope rope.
To create a flower bed, we will prepare several plastic or metal pots; ceramic pots will not work for these purposes, because. when exposed to outdoor conditions, the surface of ceramics will deteriorate, moreover, this material is very fragile.
The number of pots should be selected based on the height of the flower bed, the higher the flower bed, the more pots. If desired, they can be painted in a suitable color. As a support, it is desirable to take a metal pipe with a diameter of 25 mm. After the pots are dry, the first pot is strung on a support and set vertically, the pipe is driven through the pot to stabilize the vertical flower bed into the ground, to a depth of 20 or 30 cm. The pot can contain ordinary earth sprinkled with decorating crumbs. This first pot will be the base of the flower bed. Further, on top of the first vessel, through the top, a second pot is installed on the pipe at an angle, earth is poured into it, a flower is planted or seeds are sown. Further, through the top, the next pot is added to the pipe. After all the pots are installed, the plants are watered. For stability, the lower pot is better to take a larger diameter than the upper ones.
If you plan to place a hanging vertical flower bed, then the pots are attached to a vertical wall or pole. Such a flower bed is assembled according to the scheme given above.
finished vertical bed
A vertical flower bed requires a lot of effort to create and implement a conceived design. However, most supermarkets have solved this problem for us and sell ready-made designs that need to be partially finalized. A wooden support, special shelves with fasteners or a row of plastic planters - all this can be used in your garden.
All that is required of the gardener is to fill the flower containers with soil and plant the plants there. A minimum of time costs and a finished flower bed will delight its owners in a couple of hours. This option is ideal for those who begin to delve into the basics of gardening.
DIY tire flowerbed, ideas with photos
Waste material is not always worth taking to the trash. It can be very useful in the household, for example, like these old tires. Just take a look at what masterpieces home craftsmen built from them:
- Flower bed-minion. Lined up with several tires of different diameters, painted in just a couple of colors and decorated with several covers, they will transform the yard and make it more fun;
- Clock. With such a flower bed, the owners will be in time everywhere. After all, the hands on the clock can be made quite real;
- A cup. A flower bed-cup is one of the most common options for creating from tires, but it is this color that makes it a real masterpiece. The traditional Russian flowerbed ornament invites you to a cup of tea in a shady garden.
DIY bottle flower bed
Plastic bottles are a container that is used by almost every inhabitant of the Earth. If we calculate how much water, juices, lemonades we drink from them, then we can build a whole mountain, but it is better to use them for business. For example, make a flower bed out of bottles. Both plastic and glass bottles of various sizes are suitable for creating a home flower garden.
- Flowerbed Swan from plastic bottles;
- Multi-tiered flowerbed made of glass bottles;
- Flowerbed pig from a 5-liter bottle.
How to arrange a flower bed with your own hands
Making a flower bed on your own is within the power of every gardener-gardener. With a combination of desire and opportunity, real masterpieces can settle in the garden, but you must be guided by some rules:
- It is not necessary to use templates, a flower bed can be made based on personal imagination. For example, build it in the shape of a ladybug, slides with branches and logs. The main thing is that flowers can settle in this creation;
- If there is no fantasy in decorating a flower bed, open the Internet. On our website you will definitely find a suitable option or complete your idea;
- To create a flower bed, you should not immediately run to the store, remember the deposits of unnecessary things, maybe their turn has come?
- Place the flower bed in an area where the flowers will be comfortable. Do not plant plants in too shady or sunny places. Also think about space, flowers need freedom;
- Close-growing plants for a flower bed are best selected according to the timing of flowering. Do not forget that each plant has its own period. Soon it will lose color and the flower bed will be empty, so plants should be planted in tiers or in rows with different flowering periods. When some flowers shed their bright buds, others will begin to bloom;
- It is also worth making a distinction between species according to growth height. Do not plant small flowers between tall bushy creatures. Small flowers will not have enough light, and it will look completely inharmonious. As a rule, tall flowers are planted in the center of the flower bed, in the corners or in the background;
- Color combination. The most popular in floriculture is a combination of white and pink, pink-purple or yellow-red shades. Beautiful colors are always pleasing to the eye;
- At the end of planting, be sure to remember about watering. Even if you are planting ready-made materials, for their comfortable adaptation to new conditions, soil moisture should be carried out.
DIY flowerbeds from improvised means, with a photo
- Flowerbed-carousel;
- Flowerbed-bike;
- Wash basin with plates.
Flowerbed do-it-yourself schemes
An important fact in the design of the flower bed is the successful placement of plants. The type of flower garden depends on this. A beautifully created panel of flowers attracts attention. To do this, it is necessary in advance to draw up a scheme for a flower bed, which is usually made up by landscape designers. But today we will do without them. Ready-made schemes for creating flower beds, see below.
- Central flower bed;
- Summer flower garden. According to this scheme, it will bloom all summer;
- Simple flowerbed with tulips.
video: unusual flower garden
The best decoration of a dacha or garden are flower beds that bloom and bloom all summer. Properly placed and beautifully designed flower arrangements will decorate and ennoble your dacha.
How to make a flower bed with your own hands will be described later in this article.
Preparation for work and rules for designing a flower bed
First, choose a place suitable for decorating a flower bed. Decide what flowers you would like to see, and what form to bring to the flower garden.
In order for the flower bed to organically fit into the landscape of your site, consider factors such as: the size and shape of land ownership, the location of buildings, the illumination of the future flower bed. The shape of the flower garden can be different, it all depends on your preferences.
Flowerbeds along paths and fences are best made long.
Place single-tier flower beds of continuous flowering near the garden house.
Multi-tiered flower beds with climbing plants are ideally placed along fences, walls and around a country gazebo, the loaches will create shade and coolness, ideal for relaxing.
If your site has a pond, be sure to decorate it with flower arrangements. Open free areas can be decorated with closed, fantasy flower beds with flowers of the same variety.
Creating flower beds and flower beds with your own hands, make plans for future plantings. By transferring your ideas to paper and carefully considering color and stylistic solutions, it will be easier for you to bring your ideas to life.
In multi-tiered flower beds, plants are combined in height and planted as follows: ground-blooded (purslane, saxifrage), undersized (nasturtium, petunia), medium-sized (geranium, chamomile), tall (ferns, ornamental trees).
Consider the flowering time - the best option is a constantly blooming flower bed.
The original design of the flower bed
When decorating flower beds in the country with your own hands, think over fences for flower plantings. Fences will bring additional decor and complement the flower arrangement.
Various objects can serve as a fence, such as stones, tiles, bricks and other improvised materials.
Stone fences
If bricks remain on your site after the construction of the house, use them in the decor of the flower garden. When making a flower bed of bricks or stone, you will need cement mortar and brick laying skills.
It will be enough to put two rows of fencing and a beautiful flower bed is ready. The decoration with wild stone will be very original, it is slate, granite, cobblestones of various shapes.
Compositions from tires and bottles
Creating flower gardens from unusual things, such as old tires and plastic bottles, has become extremely popular. Using a creative approach, luxurious compositions can be made from these items.
In the photo of the flower bed you can see the use of bottles. Before burying the bottle, fill it with earth to avoid deformation.
Note!
Tire beds will serve you for more than one year. From old wheels of different diameters, you can create multi-tiered compositions. If desired, tires can be painted with bright colors.
The wheels are also hung as a planter, plants with falling stems would be ideal for such a flower bed.
Furniture and appliances in the design of a flower object
The use of interior items in garden decor is becoming more and more fashionable. Chairs, sideboards, dressing tables, iron beds, bathtubs, washbasins and even toilet bowls are used.
For example, the outer surface of a bathtub can be painted or tiled, filled with earth, and placed near a pond. Plant petunias or violets in chests of drawers with open drawers.
For more durable use, it is better to cover wooden objects with moisture-resistant products.
Note!
An old bicycle, and even a small car, can become a flower garden. You will need paint and a little imagination to turn your summer house or garden into something extraordinary. Photos of the design of the flower beds will help you with this.
Choice of colors
When choosing flowers for future compositions, consider not only the color, but also the duration of flowering, the height of the bush, the possibility of neighborhood, watering requirements and sunlight.
By carefully choosing plants and putting your soul into the design of your summer cottage, you can turn your most daring ideas into reality.
DIY photo of flower beds
Note!
It is not always clear why you can’t just plant a beautiful flower garden in the country, but someone has a desire to make unusual flower beds with their own hands from improvised materials. Let's be honest, these experiments are not always successful, but we will try to introduce you to the most beautiful options for such flower beds.
Let's see if we can decorate such flower beds with our cottage or not.
Flowerbeds with their own hands from old things.
We all change the windows in the house over time, and the old windows, although they do not look good, still seem to be strong. It’s a pity to throw them away and there’s nowhere to really use them. On a blank wall of a house or barn, you can make original flower beds imitating a window from old windows. A perfectly acceptable option is to bring the old window into a tidy look, remove the old glass from them and add a flower box and fasteners along the edges of the window.
If old furniture is thrown away in the house, then the boxes are also the basis for the original flower bed. From small boxes and cut branches, you can build a beautiful flower train. boxes for the season are quite capable of getting wet from the rain, then it is more reasonable to place such a flower garden on the veranda or in the gazebo. 
How to make flower beds from natural improvised materials in the country.
How to make a flower bed from a log.
In order for the flower bed to have enough space for flowers, a log of a really large size is required - with a diameter of 50 cm or more. How to choose the right container for a flower bed in a tree is shown in the photo. There is an economical version of such a flower bed, when a wooden box is lined with slabs along the long sides, and two saw cut logs are glued into the end of the box.
A flower bed with your own hands from a stump.
In life, everything is a little different than in the photo. The stump should be very large and strong. If you use an old stump for a flower garden, then it starts to crack and fall apart from watering. Alternatively, you can take a strong middle stump, split it in half, select the middle part and then glue the two parts of the stump together. By placing a pot of flowers inside the modified stump, we get a completely aesthetic imitation of a flower bed from a stump.
Flowerbed from an old tree.
You are lucky if you are the owner of an old tree. With the help of a dozen hanging petunia pots, it can be turned into a luxurious flower bed. It is appropriate to supplement such a flower garden with a cage with flowers.
A fun little flower bed can be made with minimal effort.
The difficulty of making flower beds with your own hands from improvised materials is not so much in the cost of time or materials, but in the ability to see the beauty in everyday, often no longer needed things.
Flowerbeds with their own hands from improvised materials after repair.
I don’t know about you, but I’m most curious about the flower beds made from the remnants of new materials. Perhaps because we have a renovation in our house, and there are plenty of such materials. Let's see where they can be applied.
How to make a flower bed "basket" of linoleum.
From a dozen iron rods and the remnants of linoleum, it is not difficult to make a beautiful and large flower bed-basket. Moreover, it is not necessary to fill the basket with earth and plant new flowers in it, if you surround a peony or daylily bush with this basket, it will also be beautiful.
Do-it-yourself vertical flower beds made of plastic pipes.
From plastic pipes you can make a vertical flower bed. The depth of such clubs is quite small - only plants with a shallow root system - purslane, succulents, etc. will feel good here. Where will the excess water go? If you make holes at the bottom, then dirty water will stain the wall. You can make an irrigation system with tubes for drip irrigation of each module, or you can do it easier - use such a design as a planter for cups with small flowers. The solution with painting the pipe in a bright color is very cute.
How to make flower beds from hollow building blocks.
By gluing a grid to the bottom of the block, it can be used as a flower garden. The color of the blocks is amazing. Maybe it's wallpaper?
Flowerbeds from wooden pallets.
By cutting an ordinary plastic bottle and painting it, you can get such a cheerful flower garden.
In order for flower beds made of plastic bottles to look neat, it is advisable to paint them.
Flowerbeds with their own hands from tires.
The main thing in such a flower bed is accuracy - given that the paint on rubber does not hold well, it is necessary to paint such a flower bed every year.
Old iron barrel can also become a flower bed. Unpretentious lobelia feels great in such a flower garden.
Flower garden from old CDs.
A plastic cup and three old CDs - and you have a miniature flower bed ready for your desktop or kitchen.
Flowerbed-stream. From large containers you can make a flower bed-stream. You can read more about the intricacies of creating such a flower bed in the article.
Flowerbed-well. Whether you need to decorate an old inactive well or you are ready to make a decorative imitation of it, such a flower bed will become a bright accent in any garden.
Many flowerbeds made from odds and ends are fun and cute, and they look great as a mischievous accent in landscape design. It is important that these flower beds look neat, the plants in them feel comfortable and look healthy. Some of the flower beds will not be in our garden for long, the most successful ones will delight us for years. After all, in a good dacha there is always a place for a bold experiment.
We have prepared additional various flowerbed options with our own hands from improvised materials for you in our video.