How and how can a blockage in the bathroom be removed?

Bathtub clogs occur due to improper use of the sewage system, into which hair, wool and small debris get into, which cannot be kept track of. As a result, all this turns into a lump that does not allow water to pass. To avoid stagnant water, you should know how and how to clear the blockage in the bathroom. There are several ways, the effectiveness of which will depend on how strong the blockage is.

Using a plunger to remove a blockage

Surely, this simple device is in every home. It is used to remove blockages both in the sink and bathtub, and in the toilet. It is appropriate to use a plunger not only to remove a blockage that has already appeared, but also to prevent it.

The more often you use the plunger, the less often a blockage will form.

The instructions for using the plunger are simple, so everyone can use this method:

• The plunger must be positioned so that its rubber part completely covers the drain hole.
• To make cleaning more effective, we recommend that you fill the bath with a little water first.
• The plunger handle is slightly raised up, then lowered, and so on several times. This must be done abruptly and continuously, so that the air abruptly enters the sewer system and pushes that lump of mud that does not give the water a “run”.

Under such pressure, the blockage can go deep into the sewer, and some dirt particles can float to the surface, they just need to be washed off with water.

Removing clogging with baking soda or vinegar

Despite the fact that today people do not often resort to folk methods for removing blockages, soda and vinegar are universal remedies for blockages that can be used when there are no other means for blocking in the bathroom at hand.

There are two options for how to break through the blockage using baking soda and vinegar:

• In the drain of the bathtub, in which there should be no water, pour half a packet of soda, after 5 minutes turn on a large pressure of hot water.
• Pour four tablespoons of soda into the drain, pour half a glass of vinegar there. Next, the hole must be closed with something to start a chemical reaction. After 10 minutes, you can turn on a strong pressure of hot water.

Attention! Frequent use of this method to clear a blockage can result in pipe deterioration. Therefore, it is best to use a plunger for prevention, and in case of blockage, vinegar and soda.

Lemon juice to combat clogging

One of the most primitive folk ways to "break through" the drain is to use regular lemon juice. You will need 3-4 whole lemons, from which you need to squeeze the juice directly into the drain and leave there for two hours (at this time, you cannot use the bathroom and turn on the water). As soon as two hours have elapsed, a strong pressure of hot water should be turned on.

Sewer cleaners

The easiest way to remove a sewer blockage is to purchase special chemicals that do all the work for a person due to their aggressive active ingredients. The most effective product will be one that dissolves hair and coat.

To remove the blockage, any product in the household chemicals department is suitable, which says that it copes with blockages and is suitable for these purposes.

To make the right choice among the variety of household chemicals and use it as efficiently as possible, you should use several recommendations:

• The blockage is eliminated not only by products that are sold in powder, but also by liquid products, however, the consumption of liquid products is greater.
• In the instructions for the selected tool, you should clarify whether it is suitable for your pipes, since not all tools are suitable for certain pipes.
• The product itself is poured or poured into the drain hole, but if it is a powder, then it is better to pour another glass of warm water into the pipe on top of it.
• When using household chemicals, you cannot use the bathroom for some time, as this can lead to the fact that the product simply dissolves in the water and does not remove the blockage. Each chemical takes time for the chemical reaction to start.

Despite the fact that folk methods for resolving the problem that have arisen are quite effective, it is recommended to alternate them with chemical agents and be sure to clean the pipes in order to prevent stagnation.

How to clean a blockage in the bathroom: video

In addition to the traditional plunger and chemicals, there are several more effective and not quite standard ways to clean the sewer. You can learn about them from a special video:

It is always easier to prevent a blockage than to eliminate it, therefore it is recommended to install a protective mesh on the drain, which will filter the dirt and prevent large blockages from entering the pipe. Bathtub blockage cleaners can be used periodically to clean the tub to help prevent strong plugs.