A clogged sewer is a very unpleasant phenomenon when the water does not go down the drain, and a disgusting smell is felt in the bathroom.
There are many ways to remedy the situation, although some housewives do not even know how to clear the blockage in the bathroom with folk remedies.
Usually, blockages are caused by improper use of the sewer. Most often, pipes become clogged due to hair, animal hair, small debris and pellets from clothes. All this turns into one large lump, because of which water cannot pass through the pipe.
Ventuz
This is a simple thing that is widely used to eliminate sewer blockages and.
It is believed that this method can be used as a prophylaxis. The more often the hostess uses the plunger, the less often a blockage will occur in the bathroom.
Instructions:
- The plunger must be installed so that the rubber nozzle completely covers the drain hole.
- Before cleaning, it is worth filling the bathroom a little with water.
- The plunger handle must be lifted up and then down several times in turn. This will force the air into the drain hole and push the resulting blockage. To wash it off, you just need to turn on the water.
Household chemicals
In fact, you can clean the blockage in the bathroom without a plunger. After all, you can simply purchase modern cleaning products.
If previously only soda was used for this, today it is enough to visit the household chemicals department and choose the packaging you like.
It is best to choose a product whose instructions indicate that it dissolves hair and wool.
- You can choose not only a special cleaning powder, but also a liquid agent.
- It is necessary to clarify in the instructions that the selected tool is really suitable for a specific type of sewer pipes.
- The product must be carefully poured or poured into the drain hole. If it is a special powder, you should also pour a glass of warm water.
To be sure to remove the blockage, you need to leave the bathroom for a while.
- After a certain period of time specified in the instructions, it is necessary to turn on hot water in order to flush the sewer pipes well and remove the debris.
Folk remedies
In the old days, every self-respecting housewife knew exactly how to clear a blockage in a bathroom with soda and vinegar. Today, women rarely resort to using folk remedies. However, at home, blockages can be easily removed in two ways:
- In the drain hole of the bathroom, where there is no water, you need to pour half a pack of soda. Hot water should be turned on after 5 minutes.
- Pour 4 tablespoons of soda into the drain and pour half a glass of vinegar there.
Then the hole needs to be closed with something so as not to interfere with the chemical reaction. After a while, you can turn on hot water. The easiest way to get rid of the debris is with a strong pressure.
Such methods are quite effective, but they can negatively affect the condition of the pipes.
Cable
A plumbing cable is a thick, twisted wire coiled into a small spiral. For convenient rotation, a handle with a wooden or plastic attachment is provided at the end.
Such a device is actively used to remove sewer blockages. And we are talking mainly about metal pipes.
Application:
- The end of the cable must be carefully inserted into the drain hole.
- It is best to do the job together. So, one person slowly rotates the handle, while the other gently pushes the cable forward.
- When the cable is twisted, the accumulated debris is removed from the pipes, that is, the blockage is destroyed.
- As soon as the stress in the pipes decreases, you need to pull the cable back and forth several times.
- The cable is carefully removed, washed and stored.
- If the procedure is ineffective, repeat it.
Before removing the blockage, pay attention to the cable tension. Lack of tension can damage the cable.
Cleaning the siphon
The male owners do not think long about how to clear the blockage in the bathroom. As a rule, they immediately start cleaning the siphon. This procedure allows you to get rid of the debris accumulated in the pipes and the unpleasant odor in the room.
Cleaning procedure:
- On the floor, directly under the siphon, you need to spread a rag that absorbs moisture well.
- A basin should be placed on top of the fabric. This is a simple measure to avoid getting dirty water on the floor.
- The bolt nut must be unscrewed very carefully. After that, you need to remove the flask.
- Immediately after this, the water that formed the water seal will flow into the basin.
- The siphon itself should be thoroughly rinsed with water and all plaque removed from the walls.
The entire structure must be installed so that the drain pipe does not rest on the flask. This is very important, otherwise the water seal will be broken. To check the tightness of all connections, you need to open the tap and fill the water seal.
Such cleaning can also act as a preventive measure. For this purpose, the siphon is cleaned every 2-3 months.
How to avoid blockages
Of course, any blockage can be unclogged using one of the above methods. However, it is much easier to worry about prevention in time.
- It is necessary to install fine nets in the drain hole to retain debris.
- From time to time, it is necessary to fill the drain with means intended for cleaning pipes.
- A plunger should be used periodically.
Thanks to the observance of all preventive measures, you no longer have to puzzle over how to clear the blockage in the bathroom with a cable or plunger. Moreover, the bath will always be clean and the air in the room will be fresh.