A bathroom covered with limescale or rust stains not only does not dispose to long-term and pleasant water procedures, but also makes the process of taking a banal shower several times shorter. It seems that nothing will return the plumbing to its former whiteness, shine, neatness and cleanliness. In fact, all this can be done by quite ordinary products available in every home. In this article, we will look at how to clean your bathtub with baking soda and vinegar, store whiteness, and other natural remedies.
Soda cleaning
In this section, we suggest that you familiarize yourself with how to clean a bath with soda. By the way, the latter can be both edible and calcined, that is, highly alkaline. Accordingly, the question of how to clean the bath with soda can have a different solution, both in terms of the process itself and in terms of the final result.
Reference: Baking soda is an alkaline substance that often acts as a baking powder in food preparation. But cleaning the bath with soda ash involves the use of another powder, which is a strong alkali. It quickly removes plaque, breaks down fatty deposits and neutralizes the most stubborn dirt.
Such a versatile product is sold exclusively in household stores, and just before cleaning the bath with soda ash, you need to protect your hands with rubber gloves and familiarize yourself with personal safety precautions.
How to remove minor sediment?
The answer to the question of whether it is possible to clean the bath with soda is always positive, but only when it comes to food. In this case, a small amount of the product is rubbed over the surface of the plumbing with a wet, soft sponge or brush. After wiping all stains and problem areas well, the font remains “soaked” for at least an hour, after which the powder is washed off with a weak stream of lukewarm water.
For your information: If you use this option for how to bleach your bath with baking soda regularly, then the plumbing will remain white and shiny for many years.
We remove strong plaque
Now let's consider the option of how to clean the bath with soda ash and its kitchen counterpart. This blend, supplemented with store-bought bleach and vinegar, is excellent at removing heavy deposits of grease and limescale. In general, this method of how to clean the bath with soda ash is as follows:
- It takes two tbsp. tablespoons of each type of soda, and a little water is added to the powder.
- A dirty container is rubbed with the resulting gruel and left for 15-20 minutes.
- Then, to wash the bath with soda ash, you need to combine half a glass of vinegar and bleach. The resulting composition should be applied over the existing soda layer, and left still for half an hour.
- The surface of the bath is wiped with a soft washcloth, after which it is well rinsed with water from a shower head.
Another way to whiten a bath with soda ash involves the presence of soap, but only household soap. Grated soap, mixed with powder in equal proportions, is diluted with 5 drops of ammonia and 3-5 tablespoons of ordinary water. The finished mixture is pounded on plumbing and remains on it for at least an hour. Then everything is washed off in the same way, but not with hot water.
As you can see, cleaning the bath with baking soda is much cheaper than using commercial products in the form of creams, powders and gels. And having tried them in practice, you yourself will understand why we are sure whether it is possible to wash the bath with soda. It does not cause burns or allergies, does not damage the surface of plumbing fixtures, is easy to use and is very cheap.
Use vinegar
Considering the options for how to clean the bath with vinegar, I would like to note the following method. It is slightly stretched in time, but you do not need to breathe in pairs and try to wipe off the hated stain. In general, soak a large amount of paper towels in the vinegar to cleanse your bathtub. Lay them all over the font, from the very edges to the bottom. Such self-cleaning of the bathroom with vinegar lasts at least three hours, although overexposing the product does not mean ruining the plumbing.
Another way to clean the bathtub with vinegar is to simply rub the bathtub with the liquid itself. Then the container is left to soak throughout the night, and then sediment and rust are removed with a hard sponge. If the dirt is strong, then the stains can only fade, and not disappear altogether.
Tip: In any case, before you wash the bath with vinegar, try its effect on the coating in an inconspicuous place on a small area of the surface.
Cleaning your bathtub with baking soda and vinegar is a snap. And to clean the bath with soda and vinegar, the font itself must be well moistened, and generously sprinkled with regular soda ash. The whole thing remains to soak for several hours, after which, in the same way, without being greedy, it is poured with table vinegar. Such cleaning of the bath with soda and vinegar should be carried out with open windows or doors, but not in any confined space.
It is possible that you will have to use a brush or sponge to remove particularly stubborn dirt. By the way, this method of how to wash a bath with soda and vinegar is more focused on cast iron and enameled products, since acrylic can react to it in the most unpredictable way.
Conclusion
As you can see, we perfectly clean the bath with soda and vinegar, plain water and other handy means, saving money and not polluting the environment with phosphates and harmful impurities.