Making slime at home. How to make a slime at home

Slime or "chewing gum for hands" is an unusual plastic toy that changes its shape, which you can easily make yourself at home. How can this be done? In our article you can find out a few simple ways cooking slime.

Shampoo and salt

Making a slime from shampoo and salt is quite simple. To do this, you need the following components:

thick shampoo - 4-5 tsp;
salt - 1 tsp

Place the shampoo and salt in a small container. Then mix thoroughly and remove in refrigerator compartment for 15-20 minutes. Such a "chewing gum for hands" will differ somewhat from the store version due to its greater viscosity and stickiness.

multi-colored slimes

Polish for hair

Hairsprays contain a special substance - polyvinyl acetate, which forms a film on the surface of the hair, due to which it turns out to preserve their volume. You can make a slime out of any hairspray. Take:

hair spray - 20-25 injections;
PVA glue - 95 g;
gouache or acrylic paint - 1-2 drops.

Pour PVA glue into a bowl and start injecting hairspray, stirring constantly. After the future slime begins to thicken, add gouache or acrylic paint to add color. Continue stirring until smooth.

Plasticine

To prepare "hand gum" from plasticine, you need the following ingredients:

transparent glue - 250 ml;
soft plasticine - 15-20 g;
boiling water - 300 ml.

Take a small bowl, put half a teaspoon of sodium tetraborate in it and pour boiling water over it, mix thoroughly until the borax is completely dissolved. Let the mixture cool down for a while. Prepare a second container for mixing plasticine and clear glue until smooth. Then stir all the ingredients completely until the stickiness of the composition to your hands disappears. Such a slime should turn out to be quite viscous.

PVA glue

Oddly enough, but PVA glue can help in this interesting lesson like making a slime. Ingredients:

PVA glue - 100 g;
acrylic paint (any shade) - 1 tbsp.;
water - 200 ml;
contact lens care liquid - 1 tsp;
baking soda - 1 tablespoon

Pour PVA glue into a small plastic container and stir it with water. Add acrylic paint little by little - as a result, you should get a liquid of an even shade. Now take another container and pour water into it and pour in the baking soda - mix thoroughly until the sodium bicarbonate is completely dissolved. Mix the contents of two containers together until a thick mass is formed.

elastic bright slime of different colors

Sodium tetraborate

Sodium tetraborate is the sodium salt boric acid widely used in industrial production... From of this substance just make a slime. The following ingredients are required:

cold water - 250 ml;
PVA glue - 100 g;
sodium tetraborate (borax) - ½ tsp;
gouache - 2 tsp;
glycerin - 2-3 drops.

Pour water and PVA glue into a shallow bowl - mix thoroughly. Then add a little gouache (color of your choice), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Refrigerate the mixture for 15 minutes.

Shaving foam and PVA glue

A slime can even be made from ordinary shaving foam. Take the following:

shaving foam - 200 ml;
PVA glue - 100 g;
water - 200 ml;
sodium tetraborate - ½ tsp;
gouache paints - 50 g.

Put "borax" into a plate with high sides or a bowl and pour in water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA glue and paints. Mix all the ingredients again. As a result, you should get a soft lump that will stick to your hands, so to get rid of stickiness, you need to wrinkle it in your hand for several minutes, and then put it in the refrigerator for 10-15 minutes.

Starch

You can also make your own hand gum using starch. Components:

starch - 100 g;
PVA glue - 100 g;
water - ½ glass;
food coloring or acrylic paints -50 g.

Pour half a glass of water into a shallow bowl, add the starch, stirring it thoroughly until it is completely dissolved. Then add food coloring or acrylics (color optional). Let the mixture cool slightly by placing it in the refrigerator. Transfer the starch to a bag or plastic bag and mix with PVA glue. Shake the contents of the bag well until smooth.

slime with amazing consistency

Toothpaste

There are 2 ways to prepare toothpaste-based slime. Let's take a closer look at each of them.

On the water

You need to take the following ingredients:

toothpaste- 100 g;
water - 200 ml.

Squeeze out the toothpaste into a bowl. Boil water over medium heat in a small saucepan. Put a bowl of pasta in a water bath and cook for 15-20 minutes. Remember to stir constantly. As a result of the above manipulations, a dry mixture should be obtained, which must be put to cool for a while. Lubricate your hands olive oil and start kneading the cooked mass. You will get a viscous and elastic slime.

In a microwave oven

To make a toothpaste-based slime in the microwave, you will need:

toothpaste - 100 g;
cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze the toothpaste into a shallow dish prepared for microwave ovens... Leave to warm up in the microwave for 2-3 minutes. Then take out the plate, stir the paste thoroughly and send it back to warm for another 3 minutes. As a result of all the manipulations, you should get a dry mixture. Apply cosmetic oil to the future slime and knead it properly in your hands.

Dishwashing liquid

Making hand gum out of detergent is easy. Ingredients:

dishwashing liquid - 100 ml;
baking soda - 2 tablespoons;
hand cream - 1 tsp;
acrylic paint - 1-2 drops.

In the container small size lay out detergent, then add some baking soda, hand cream, and acrylic paint - mix very well. The mixture should be thick enough. Put the resulting mass in the refrigerator for 2-3 hours.

Flour

To make flour-based slime, you need the following ingredients:

wheat flour - 100 g;
hot water - 100 ml;
cold water - 100 ml;
acrylic paint - 1-2 drops.

Sift the wheat flour into a shallow container using a sieve. Add to it first cold water, and then hot (in any case, do not use boiling water) and dye. Stir the contents of the dishes thoroughly. Refrigerate the mixture for 2-3 hours.

example of making slime

Air freshener

It is possible to make a "hand gum" from an air freshener, but only with the help of additional components:

PVA glue - 100 g;
air freshener - 20-30 sprays;
sodium tetraborate - ½ tsp

Pour PVA glue into a shallow dish and add an air freshener to it - mix thoroughly. Then pour in half a teaspoon of sodium tetraborate and mix everything well again. Let the resulting mixture sit in the refrigerator for 10 minutes.

Nail polish

As the main component of the slime, you can use ordinary nail polish. Take:

nail polish - 3-4 drops;
PVA glue - 100 g;
water - 100 ml;
sodium tetraborate - ½ tsp

First, mix cosmetic varnish and PVA glue. Then add a little water and half a teaspoon of sodium tetraborate. Mix all ingredients thoroughly. Put the resulting mixture in the refrigerator for 10 minutes.

Gelatin

You can prepare slime without using PVA glue. For this you will need:

plasticine - 100 g;
gelatin - 50 g;
water - 100 ml.

Add gelatin to the water and stir until it is completely dissolved. Then let it brew for 1-2 hours. Boil over low heat for 2-3 minutes. In a separate container, mix the clay with water and gelatin. Knead the mixture in your hands until smooth.

Chocolate paste "Nutella"

A slime made from Nutella chocolate spread is edible. It includes:

pasta "Nutella" - 4-5 tablespoons;
marshmallow "Marshmelou" - 10-15 pcs.

Melt the marshmallows in the microwave. Add Nutella chocolate spread to it. Mix thoroughly - it will take a long time, but the result will be worth it. When ready, you can eat the resulting slime by spreading it on bread or cookies.

Frutella sweets

To prepare an edible slime, you will need the following ingredients:

Frutella sweets - 6-7 pcs .;
icing sugar - 100 g;
water - 300 ml.

Melt the candy in a water bath. Let cool. Add the powdered sugar and roll the mixture in your hands until it loses its stickiness.

Silicate glue

"Hand gum" made of silicate glue will be completely transparent. To make it you need:

silicate glue - 100 g;
water - 250 ml;
sodium tetraborate - ½ tsp

Pour 250 ml of water into a small bowl and add sodium tetraborate - mix until the borax is completely dissolved. Then squeeze out the silicate glue and mix all the ingredients thoroughly together.

home slime

Salt and soap

Let's take another one unusual recipe making homemade slime. Take the following:

liquid soap- 100 ml;
salt - 1 tsp;
acrylic paints or food coloring - 1-2 drops.

Pour 100 ml of liquid soap into a container, then add salt and color to it. Mix thoroughly. Refrigerate for 15 minutes.

Metal shavings

The recipe for making slime from metal shavings is considered unique, since it is magnetic. Ingredients:

metal shavings - 100 g;
PVA glue - 100 g;
boric acid - 1 tsp

In a shallow container, mix iron shavings, PVA glue and boric acid. Stir until the mixture is thick enough. Then take the magnet and bring it to the slime - it should stretch out.

Polyvinyl alcohol

Polyvinyl alcohol or PVA is often used to make slime as a component that replaces PVA glue. Ingredients:

polyvinyl alcohol - 3-4 tbsp ..
"Borax" - 1 tsp;
food coloring or gouache - 1-2 drops;
warm water - 200 ml;
medical bandage - 30 cm.

Dissolve the alcohol in water and then simmer for 30 minutes. In a small bowl, dissolve "borax" in water, pass through a bandage to remove excess liquid. Mix sodium tetraborate with PVA and gouache. Place in a plastic bag and remember well with your hands. Place the slime in the refrigerator for 15 minutes.

Baking soda and glycerin

Prepare the following ingredients:

baking soda - 100 g;
glycerin - 2-3 drops;
sodium tetraborate - ½ tsp;
PVA glue - 100 g;
dye - 1-2 drops;
water - 200 ml.

Heat the water without boiling. Add sodium tetraborate, glycerin, PVA glue and dye to it. Mix all of the above ingredients thoroughly until a homogeneous mass is formed.

Hydrogen peroxide

To make a slime based on hydrogen peroxide, you will need:

hydrogen peroxide - 1 tbsp;
PVA glue - 100 g;
water -100 ml;
dye - 1-2 drops;
baking soda - 100 g.

Water

You will need the following components:

water - 200 ml;
baking soda - 100 g;
dye - 1-2 drops;
shower gel - 2 tablespoons

Dissolve the baking soda in the water. Add a couple drops of dye and 2 tablespoons of shower gel. Mix all ingredients thoroughly. Set the resulting mass to freeze in the refrigerator for 20 minutes.

Mix the baking soda and water in a separate container. Add dye and PVA glue - mix again. At the very end, pour in hydrogen peroxide to add airiness to the mass. The slime will become as if foamed.

Glue stick

The following ingredients are required:

glue stick - 1 pc .;
dye - 1-2 drops;
sodium tetraborate - ½ tsp;
water - 100 ml.

Remove the adhesive from the plastic sheath, put in special dishes warm up in a microwave oven for 2-3 minutes. Add dye, water and sodium tetraborate to the glue - mix thoroughly. Put the resulting mass in the refrigerator for 5-10 minutes.

In our article, you have met the most interesting and unique recipes cooking slime toys at home. All of the above ingredients are safe when you follow the rules for working with chemicals.

With the ability to stick to hands and surfaces, to change shape depending on imagination, the toy Slime has earned great popularity among children. She leads them into an indescribable delight. And so today I decided to deal with the question: how to make a slime at home.

Slimer is the case when most adults relate to children's fun without much joy. But what to do if kids are crazy about a copy of a cartoon character from the acclaimed "Ghostbusters"?

There is only one answer - to understand and accept the hobby of the younger generation. And also remember your childhood, and help make a slime at home.

Dear mums and dads, grandfathers and grandmothers, let's try to celebrate positive sides childish attachment to a dodgy toy. This will undoubtedly make her more attractive to us.

Firstly, the slime is useful for kids, as playing with it develops hand motor skills and imagination. Adults, by the way, can also massage their hands.

Secondly, there is an additional free time, when the child tries to calm down the naughty slime (whatever the child is amused, if only he does not cry).

Thirdly, money is saved when making a demanded toy on an independent basis. And, finally, the most important thing - unforgettable minutes spent with the baby on making a fascinating creature in a cozy home environment.

After all, there is no greater happiness for both adults and children than interesting communication for joint work.

It will not be difficult to create a slime with your own hands and bring joy to the baby. The main thing is to have the desire and some materials at hand.

Let's get down to action, and be content with the invention of an unusual hero - a spreading, sprawling, escaping slime.

The standard of slime, let's call it classic, is made from PVA glue, borax (aka sodium tetraborate) and water. It is quick and easy, and the toy turns out to be wonderful: repelling from all surfaces and elastic.

A kind of jumper, while remaining soft. Such a craft can even be washed, it is not afraid of moisture.

Sodium tetraborate can be purchased at drug stores and radio stores. Buy a solution of four percent, you can also use a powder, which is diluted as follows - by 1 tbsp. spoon half a glass of water.

We prepare a set of components:

PVA glue - one hundred grams (white), with a useful life
Sodium tetraborate (vial)
Choice of dyes - in the form of gouache, brilliant green, acrylic paints, food dyes
Dishes with a size of more than half a liter
Wooden stick for stirring.

We make children's fun

The toy is ready for battle. It's just like a store. No, it's even better - after all, it was created by the hands of caring parents for the delight of the child!

It is worth adding some comments in order for the slime to turn out to be original, and for a long time served a happy toddler.

It is necessary to keep the slime in a box that is tightly closed with a lid.
Leaving the toy in the sun or near heating devices Not recommended.
It is also not advisable to place the created slime on fleecy surfaces (carpets, clothes), which will ruin a smooth and even toy, and our baby will be upset.
Drops of essential oils will give a zest to the man-made creation. Enchanting scent will be a joy to children.
Do not regret cosmetic glitters - the slime will become charming, even somewhat glamorous from their small amount.
Drop a little vinegar into the solution - the slime will become more plastic and viscous. And the paint won't stay on your hands.
A small amount of glycerin droplets will make the homemade product look like a cartoon prototype - it will become slippery.
The added hydrogen peroxide will turn the craft into a light and airy substance.

What does home conditions mean? The presence of components that are always at hand. Such materials are baking soda and PVA glue. Just something, and how much joyful childish screeching in response!

Putting together a toy set:

PVA glue - 50 gr.
Soda - one tablespoon
Food coloring - it's good to eat, no - you can do just fine without it
Plastic container - 2 pcs.
Wooden stick for stirring
Rubber gloves
Half of 1 tbsp. water (always warm).

Step-by-step creative production of slime in a home atmosphere:

All business is - and the slime is ready!

It should only be noted that the slime made of glue and soda is not very durable. They will probably be played for no more than four days. But this has its advantages - you can cook fresh, which will differ in cleanliness and sterility.

There was no tetraborate, but the baby wants a lick, similar to the store one? No problem, let's do it. For these purposes, we will find liquid starch (used for washing) and PVA glue. The slime will be as it should be - viscous and vague.

Useful for us:

PVA glue - a quarter of a bottle (not expired)
Liquid starch - a third of the bottle (ordinary starch can be diluted with water, in one-to-one proportions)
Dye - what is at hand
Mixing bag.

Manufacturing:

Place liquid starch in the bag.
Add a little dye.
Send glue next.
Stir the mixture - you can even use your hands.
Make sure that the mass becomes homogeneous, at the same time make sure of the color. Little color - add paint to the desired effect.
Send the package to a cold place for three to four hours.

The hours have flown by - the slime is ready for fun games. It turned out perfect! The child will be delighted. What else do you need to be happy?

One of the environmentally friendly methods of creating children's fun is from ordinary water with the addition of starch. The slime comes out wonderful, it is not scary to give it to your beloved child.

For crafts from water you will need:

Starch
Water (always warm)

The components are taken in a one-to-one ratio.

The manufacturing process is very simple, as is the set of components: water is mixed with starch, a ball is formed. The homemade product is ready.

If desired, it is possible to add dye, glitter, essential oil. This will greatly embellish homemade miracle- yudo.

This is the easiest way to create a slime. It comes out very reliable, which children are immensely happy about.

For creativity you need:

Glue called "Titan" - 90 gr. It is better to choose just such, and certainly with a suitable period of use.
Shampoo - 30 gr. Anyone will come in handy, even the most inexpensive
Any dye. The type of dye depends on what color you want to give the homemade fidget
Gloves
Plastic bag.

Step-by-step creative process

Shampoo and glue are poured into the bag, mixed.
Dye is added, mixed.

Ready! Simple and fast.

For such a technique, tips are useful:

The dye may not be added if the shampoo was colored. Or add just a little to enhance the color effect. This is already your decision.
The proportions can be varied: if you pour in more shampoo, greater elasticity is achieved. More glue- will differ in density.

It is possible to make a slime out of different materials... The easiest option is plasticine and gelatin. Surely they will be found in every home where little kids grow up.

Such a toy will be useful for kids, it will allow their hands to develop, it can be given a wide variety of shapes. In addition to motor skills, the toy also develops children's thinking and imagination.

For work, you will need a wooden spatula and containers in the amount of two pieces. Metal for dissolving gelatin, and plastic for mixing.

For creativity you need:

About a hundred gr. plasticine of any color
A couple of 25 gram packs of gelatin
Warm water up to 50 ml

Manufacturing

Take metal container, dilute gelatin according to package directions, set aside to swell (approximately one hour).
Put the container with the dissolved gelatin on the fire, bring to
boil, set aside to cool.
Knead the plasticine with your hands.
Take a container, pour in there warm water, place the plasticine.
Stir with a spatula until smooth.
Send the cooled gelatin to plasticine. Mix well, the mixture should be smooth.
Send to a cold place to solidify.

Only flour and water. This version of a homemade slime can be given to even the smallest member of the family. He will undoubtedly be interested in the yielding and pleasant to the touch fun.

To create the simplest slime you need:

Two tbsp. flour
Water - cold and hot
Dye - optional.

Manufacturing:

Pour flour into a container.
Add a quarter glass of cold water, stir. Place the dye here, if you wish.
Fill hot water in such an amount that the mass becomes sticky.
Cool the mass for 1 hour.
Knead well with your hands.

Lick is ready. Can be put into operation.

The lick comes out of the shaving foam very elastic, this fact is very popular with kids. It's also very big - how many games can you think of!

For its invention, you need to prepare materials:

Shaving foam
PVA glue
Borax (sodium tetraborate) powder - 1.5 tsp
Warm water - 50 ml
Convenient capacity
Scapula.

The creative process consists of the following stages:

First you need to dilute the borax powder. Why dissolve it in warm water in a separate container, stir it well - no powder crystals should be observed.
The foam is squeezed out into a prepared container.
Glue is added, stirred.
Add two tablespoons of the dissolved powder to the mass, mix. The mass thickens.
Add more solution, mix.
The solution is added until the mass begins to lag behind the walls of the container.
Another criterion for the readiness of the product is that the mass does not stick to your hands.

The toy is ready. It is exactly what is sold in the store.

White foam also determines the corresponding color of the product. You can bring in all kinds of colors, and get a colored toy. And if you make eyes for a slime out of buttons or paper, it will become simply charming.

You can also paint a foam slime in all the colors of the rainbow. The original toy will be a source of pride for both the child and the creator. To do this, you need to prepare several additional containers and perform the following operations:

Exclusive fun is ready. You can sculpt anything from it!
Well, dear adults, how have we convinced you that the slime is an interesting thing? That making it with your own hands is exciting and fascinating process? .. Moreover, this is another opportunity to plunge into the children's world of your child, another connecting thread. So let's say thanks to Lizun!

A slime or slime (from the English Slime) is a toy that has a viscous jelly-like shape, reminiscent of a non-Newtonian liquid. The polymer has two main constituent components and the thickener was originally polysaccharide or guar gum and borax. This is such a toy that does not have to be purchased in the store, since there are many ways to make it yourself at home from improvised ingredients. There are at least 22 recipes of this type toys.

There are many ways to create this toy. But since this is a toy, you should not forget about safety measures during its manufacture, as well as while playing with it.

From shampoo and salt

One of the most simple methods it will require the presence of:

Shampoo;
Salt.

Take about 4 tablespoons of shampoo, add a little salt to it.
Thorough mixing is required after each salt addition.
This is repeated until the mixture becomes viscous.
After that, put the resulting mass in the refrigerator.

From plasticine

Children will love the game, as well as the process of making a clay slime.

Ingredients:

1 sachet of gelatin;
A piece of plasticine;
Water.

Gelatin is poured into cold water.
The correct proportion is indicated in the instructions on the gelatin packet.
After an hour, the pan is transferred to the stove until the gelatin mixture boils.
While the gelatin is being prepared, you need to knead a piece of plasticine with your hands.
50 g of water is poured into a plastic container and plasticine is placed.
Everything is thoroughly mixed until smooth.
When the gelatin has cooled down a little, it must be poured into a container with plasticine.
Mix everything well.
As soon as everything cools down, you can play with the toy.

Of soap and salt

The recipe is very similar to making a slime from a salt shampoo.

But there is a difference in the composition:

Liquid soap;
Salt;
Soda.

Salt and soda are gradually added to the soap.
Mixing is in progress.
This is repeated several times until a homogeneous viscous mass is formed.
The end is the exposure of the mass in the cold.

Shaving foam

In order to make a shaving foam slime you will need:

Tube with PVA glue;
Shaving foam.

The plate is filled with glue.
Foam is injected to it a little.
Everything is kneaded.
Foam adheres until the correct consistency appears.
All the slime is ready, but if it does not suit him White color, then you can add a couple of drops of dye. If you add not one, but, for example, two colors, then the slime will acquire a marble pattern.

Of flour

Slime made from flour is the safest recipe for a toy. Even small children are allowed to play with it, especially if substances of natural origin are the dye. The use of a natural dye will only affect the degree of coloration towards a lower intensity.

Components:

Flour;
Hot water;
Dye;
Apron.

Sequence:

Cold water is poured into 2 glasses of flour sifted through a sieve.
Next, add ¼ part of the glass capacity of hot water (not boiling water).
Thorough mixing is required until completely homogeneous.
A dye is added if desired, it is better to add more food coloring.
Stir well until a sticky consistency is formed.
The slime, together with the container in which it was prepared, is placed in the refrigerator for at least 2 hours.
When the mixture has completely cooled down, you can play with it.

From nail polish

1 way

Perhaps this recipe will not meet the expectations of the child, but you can experiment. This requires:

Sunflower oil - about 100 ml;
Jar of nail polish.

Pour the varnish into a bowl of oil, stir until all the dye from the varnish is knocked out in one ball. This will mean that the slime is ready.

Such a slime turns out to be small, bad-smelling, a little greasy.

2 way

Varnish 1 jar;
Water;
A tube of PVA glue;
Sodium tetraborate.

Progress:

The glue and varnish are combined in the container.
Mixed up.
1x1 water is gradually added.
Tetraborate is introduced.
Stirring does not stop until a homogeneous mass is completely formed.

From PVA glue and pencil glue

Glue stick with PVA glue are very similar in structure. The only difference is in consistency, shape. If there is no PVA, but there is a glue stick, then this is no worse. Availability required:

Glue stick;
Food or other dye - 1-2 drops;
Bora.

Progress:

The glue stick is taken out of the tube.
Placed in a bowl in the microwave until melted.
Coloring agent can be added.
In a glass, water is mixed with sodium tetraborate.
While gradually stirring, an aqueous solution is introduced.
If the slime does not work due to the fact that the mass is very liquid, then you need to add tetraborate.

Edible slime variant

In order to create an edible slime you will need:

Packing of gummies (Fruttella or Mamba);
Powdered sugar;
Tanks for a water bath.

Cooking process:

The sweets are put into a container and placed in a water bath.
Until completely melted, stirring all the time.
The slightly cooled mixture is transferred to a bowl with powdered sugar.
The mixture rolls in it, mixes well.
You need to knead until the mass becomes easy to peel off from your hands.
Even a small child can play with her.

From baking soda

The slime made according to this recipe is not safe for small children due to the fact that it contains dishwashing detergent. You can play with such a toy only under the supervision of an adult. Be sure to wash your hands after playing with her.

Dishwashing liquid;
Soda;
Water;
Dye.

Phased action:

Pour the liquid dish soap into a suitable container.
Soda is gradually poured and mixed.
For a very thick consistency, add water and stir.
You can add dye.

Making a magnetic slime

In order to be original, you can make a slime that will react to the effects of a magnet, that is, a magnetic slime.

Required:

Bora;
Water;
Glue;
Iron oxide or metal filings;
Magnet.

The process itself takes place like this:

Pour 0.5 teaspoon of boron into a glass of water.
Stirred until completely dissolved. This will act as an activator.
In another bowl, pour 0.5 cups of water with 30 g of glue.
Stir until smooth.
You can add dye, paint. In order for the slime to glow in the dark, you can add phosphoric paint.
The activator solution from the first glass is added to the resulting mixture in a small stream.
You need to pour in gradually, stirring all the time.
If the mixture begins to acquire the desired consistency, it is worth stopping the addition of the activator to harden.
The slime is ready.
The slime must be removed from the bowl, leveled on the plane of the table.
Iron oxide should be poured into its middle.
Mix everything thoroughly until the color is uniform.
The magnetic slime is done. You can check its interaction with the magnet by bringing it up, moving the magnet away from the mass of the slime. The mass should follow the magnet.

Create a sparkling look

Hot water - about, 5 l;
Polyvinyl alcohol powder - 1 tbsp. a spoon;
Borax - 0.5 tsp;
Glitter (glitter) - 1 tsp.

Course of action:

Pour 0.5 liters of hot water into a bowl.
Add polyvinyl alcohol powder.
Pour boron into another container and pour hot water until dissolved.
The contents of the containers are whipped and combined.
In order for the slime to sparkle, you need to add sparkles, mix well.
Everything is ready.

From hand cream

Only two ingredients are needed, the proportions of which must be selected experimentally. Perhaps it will look like plasticine.

There are several types of hand cream;
Flour.

Method description:

Flour is mixed with cream.
It is stirred until complete coagulation.
In the process, you can add cream.

From sodium tetraborate and glue

The fastest way

PVA glue;
Tetraborate;
Brilliant green solution.

Creation process:

A tube of glue is poured into the container.
A drop of brilliant green is dripping.
Shuffled.
A little tetraborate is added.
Shuffled.
If the density is not enough, you can also add tetroborate.
Stir or knead in plastic bag until the moment when it can be easily removed from the bag.

Sodium tetraborate free

One of the most successful and also the simplest methods.

Ingredients:

PVA glue - 1 tube;
Capsule of two-component or three-component washing gel - 2 pieces.

The manufacturing process consists of 3 stages:

Pour the glue into a container from a blender.
Pour the gel from the capsules there.
Beat well.
Leave to infuse for 15 minutes.
You can reach and play.

Without PVA glue

One such way is with toothpaste.

Toothpaste;
Salt;
Shampoo;
Sodium tetraborate.

Work plan:

Mix together the paste, shampoo and some salt.
Mix.
Add sodium tetraborate drop by drop, stirring several times.
Cool down.

Starch free

Two of the many ways to create starch-free slime.

1 way

Elements needed:

Water;
Guar gum;
Baking soda;
Lens solution;
Dye.

Sequencing:

Guar gum is sieved into the poured water through a sieve.
Everything is stirred. The size of the slime depends on the amount of water.
Strain the resulting liquid through a sieve over another container, no lumps are allowed.
The liquid is colored with a dye.
Add about 2 tablespoons of lens liquid.
Soda is added about 2-3 tablespoons.
Everything is mixed for about 5-7 minutes.
You can play.

2 way

Required:

1 cup flour;
2 glasses of water.

Sequencing:

Mix water and flour.
The mass is divided into 3 parts, each of which is colored with its own color.
You need to warm it up in one of the ways: in the microwave for a minute at medium power; in a skillet with constant stirring over medium heat; in the oven for 15 minutes 160.
After cooling, the slime begins to lose its viscous qualities.

Without water

Would need:

Jelly shower gel;
Dye;
Flour.

Actions:

A dye is added to the gel, flour is gradually introduced.
If there is no thickening, then it is worth adding flour.
Good, thorough mixing is essential.

From toothpaste

Also, the method is not complicated, but the proportions must be selected experimenting.

1 way

Ingredient composition includes:

Helium toothpaste 1 tube;
Glue 1 tube;
Perfume composition (optional).

Stages of creation:

Squeeze the paste into a container.
Mixing well with adding glue.
Stir until the required consistency is formed.
To remove the smell of the paste, you need to add a drop of perfume composition.

2 way

Toothpaste - 100 g;
Polymer glue - 40 g.

Progress:

Mix the paste and glue.
Stir well, even beat until bubbles form.

From sugar

A recipe in which to experiment with proportions.

Sugar or powdered sugar - from 1 tsp;
Liquid soap;
Shampoo.

Method of creation:

Shampoo and soap are mixed in equal amounts.
Sugar is added, and preferably powdered sugar (due to the lack of powdered sugar, it can be very liquid).
Shuffled.
Leaves for 2 hours.
For 30 minutes in the freezer.

A very easy way to make glass slime

You need very simple components such as:

Cold water 1 glass;
Borax spoon;
Stationery glue (silicate).

Procedure:

Borax is added to the water and mixed until completely dissolved.
Glue is gradually introduced into the resulting liquid.
Shuffled.
Let it brew.

Air Slime Option

This slime is also called FLAFFY slime.

It is prepared from:

Shaving foam;
Silicate glue;
Liquid soap;
Sunflower oil;
Sodium tetraborate;
Dye and glitter (if desired).

In the following way:

Shaving foam is added to the glue.
Shuffled.
Soap, oil, 0.5 tablespoons of boron are added to the resulting mass.
Shuffled.
It is kneaded by hands until fully cooked.

How to make from boric acid

Since the cost of boric acid is not large, the recipe is quite budgetary.

Boric acid;
Dye;
PVA glue.

Process of creation:

The amount of glue poured will determine the size of the future slime.
Dye is added and mixed.
Boric acid is added dropwise with stirring.
For a better distribution of all components, the slime is washed with your hands.

What to do if the slime does not work

There are times when self-preparation of slime does not give the desired result. It is important to understand that the following factors influence the final result:

The quality of the materials used;
Compliance with proportions;
Step by step actions.

If the slime has turned out, then its mass will be homogeneous, uniform and easily accessible from the container.

If the slime is not homogeneous, then it is possible to save it by continuing to actively knead it until it acquires the necessary ductility and uniformity.

If the slime is very sticky and stretches after the spoon like cobweb threads, then you can try adding a little liquid starch or water, depending on the recipe. This will liquefy the consistency.

But if there is viscousness, but the slime simply slides off the hands without sticking to them, then it means there is an excess of liquid in it. In order to get rid of it, it is necessary to drain these surpluses, but you can add the necessary binder according to the recipe (glue, boron solution, flour). Mix everything again well.

How to keep the slime longer or proper care for the slime.

So what does it include proper care behind the slime.

To do this, you need to acquire:

nutrition;
a house;
a bath;
give him a place to play with him;
place in the refrigerator.

Meals include two basic salt, water, and an additional component of an eraser piece (optional).

The daily diet is 1 to 5 pinches of salt. It is required to slightly cover the bottom of the jar with water during storage. After which everything needs to be well closed, shaken. You can add some eraser pieces.

The slime house is a tight-fitting jar.

A slime can get pregnant, it will look like the appearance of small blisters all over the slime. If this happens, then it is worth putting the slime in a jar and leaving it for 4 days. After this time has elapsed, check if a small color spot, it means that the baby was "born". It needs to be separated by placing it in another jar.

Bathing is mandatory for this in a bowl with a small amount of water, the slime should be washed after which it must be removed to the house.

Frequent games are not desirable, since due to its structure, it absorbs all the dirt and dust that surrounds it. This reduces its size.

Slime is the happiness of children of the 90s of the last century and the nightmare of their parents. The toy received the name "slimer" after the release of the film "Ghostbusters", where one of the characters bore this name. The small voracious ghost ate everything that came in its path, crashed at speed into a cake on all kinds of obstacles and loved to kiss slobberly. For the resemblance to this on-screen character, the toy fell in love with children. And now many of them are purchased with slimes in stores, and those who are more economical and more inventive make their own at home.

What is this strange toy

If you see on sale a plastic jar or container filled with a jelly-like substance with the inscription "Slime" or "Slime" on the package, then this is it. You can only understand what it is by picking up the slime. It is soft to the touch, wrinkles and stretches well, sticks to walls, and then slides off them, often leaving greasy stains.

Left alone, the slime spreads over the surface in a puddle, but is easily collected by hands into a lump. It can stick to your hands, flow through your fingers, but become elastic when it hits the wall.

Initially, slime was made from guar gum, a polysaccharide, and sodium tetraborate, better known as borax. The result was a mucus-like material with the properties of a non-Newtonian fluid. It does not spread, easily collects, and when struck, it compresses.

There are many types of slimes, here are some of them:

Slime. A jelly-like mass is usually transparent. Does not stick to hands, flows through fingers in long threads, spreads over hard surface into a puddle.

The mucus is soft and stringy

Antistress. This is mucus, placed in an elastic membrane covered with a mesh net. Forms bubbles when pressed.

Slime "antistruss" relieves nervous tension well

Gum for hands. A denser elastic mass. It is easy to wrinkle and stretch.

Chewing gum for hands is more dense and elastic

Bouncer. The densest slime. It is less elastic, but elastic. Bounces off hard surfaces.

The resilient bouncer bounces off hard surfaces well

Fluffy slime. Fluffy and very pleasant to the touch. Crumples well, stretches.

Fluffy slime is the most lush and airy slime

Plasticine. It retains its shape better than others. Due to its plasticity, various figures can be sculpted from it.

Plasticine keeps its shape better than others.

There are slimes that adhere well to surfaces, matte, transparent, with foam balls, mother-of-pearl, luminous, of various colors.

Of course, such a toy can be bought in a store, but it is more interesting to make it yourself from improvised means. Moreover, this is not difficult at all to do.

How to make different types of slimes at home

What the industry makes modern slimes from is not known for certain, but what when using sodium tetraborate with homemade the substance turns out to be very similar to a purchased toy - a fact. Let's start with this recipe.

From sodium tetraborate and PVA glue

Let's prepare all the ingredients:

Now you can take it in hand, pull it, crush it, throw it and collect it again - the slime is ready.

Advice! When choosing a dye, remember that some of them get your hands dirty.

With foam for hair or shaving

Fluffy slime is made according to the same recipe. To make the slime fluffy, a hair or shaving foam is added to the composition.

Pour the glue into a suitable container.
Attach the foam to it. the amount depends on how fluffy the mass should be. Stir.
Add dye, you can use aniline or any other. Mix thoroughly again.
Pour sodium tetraborate into the mixture little by little while stirring. As soon as the composition thickens enough and begins to lag behind the walls of the dishes, you can pick it up and play.

The main condition for success in the manufacture of this type is good glue... If it does not thicken, all work will go down the drain, nothing will work.

From PVA glue and soda

But not only borax is used as a thickener. This function is excellent for baking soda.

Dissolve the baking soda in a little water.
Pour the glue into a bowl, add the dye and stir.
Add the soda solution little by little while stirring thoroughly. Wait for the mass to thicken. This will not happen right away, so do not rush to add more soda solution.
Knead the prepared mass in your hands. It will turn out even softer and more tender than the previous one, it wrinkles and stretches well.

Slime can be made shimmery by adding glitter to it

Alcohol and silicate glue

Used for making slime and silicate glue. But the properties of the toy will be different.

Pour the glue into a bowl and color with any dye.
Stir in a circular motion and add a little alcohol. You will see how the mass thickens, forming dense lumps.
Leave the substance to rest for 20 minutes.
Gather in a ball and knead well with your hands. Such a slime will not stretch and stick, its consistency is quite dense. But it will make a great bouncy.
Roll the mass into a ball and try to hit it on the floor. The resilient ball bounces off hard surfaces well.

From starch and hydrogen peroxide

A hard bouncing ball is easy to make using ordinary starch. This does not require large expenses, the toy will cost a penny.

Mix 100 g of starch with 200 ml of hot water until a jelly-like mass is obtained.
Let cool and combine with 100 ml of PVA glue.
Add a suitable dye and a few drops of hydrogen peroxide. Mix everything well. Hydrogen peroxide will give the toy lightness and airiness.
Roll the resulting mass into a ball. The bouncer is ready.

Video instruction for making slimes from glue

From titanium glue and shampoo

A simple way to make a slime is with Titan glue. This glue is non-toxic and does not lose elasticity after drying.

Mix the glue and shampoo in a 3: 2 ratio. The color and clarity of the toy will depend on the shampoo used. Add dye for more color intensity.
Leave the mixture to thicken for a while, usually 5 minutes.
The slime is ready. Simple and fast.

This recipe does not always manage to get the desired result; different shampoos behave differently. But it’s worth a try, because you don’t lose anything.

Advice! Stir the mixture until it will not lag behind the walls of the dish and no longer stick to your hands. These are signs that the toy is ready.

From glue stick

Another type of glue, a pencil, is also quite applicable for this purpose. Here again we need sodium tetraborate.

To do this, you need 4 pieces of glue stick. Remove the rods and place in a fireproof dish.
Using the microwave or oven, melt the rods until a viscous mass is formed.
Add dye to the glue mass, mix.
In a separate bowl, dissolve borax in a little water.
Add the solution to the glue little by little with constant stirring until the desired consistency is obtained.

Two video recipes for cooking slime

From plasticine

Slime can be made not only from glue. A good and durable toy is made from plasticine.

You will need:

plasticine - 100 g;
gelatin - 15 g;
water - 250 ml.

Soak gelatin in 200 ml of cold water using a fireproof dish.
When the gelatin swells, bring it to a boil on slow heating and immediately remove from heat. Let cool slightly.
Mash the clay to soften it. Mix with remaining water.
Combine the still warm gelatin with plasticine, mix well until a homogeneous mass is obtained.
Place in the refrigerator for half an hour.

Such a toy can be safely given to children, because there are no harmful substances in its composition. There is a small problem: this look leaves greasy stains on the wallpaper. Make sure children do not throw it into walls.

From toothpaste and liquid soap

A completely safe option is a toothpaste slime. You can use regular and gel paste.

Mix 20 ml each toothpaste and liquid soap with 5 teaspoons of flour.
Stir so that there are no lumps first with a spoon and then with your hands. To prevent the mass from sticking to your hands, moisten them with water and knead well again.

From soap and shampoo

For the next type, you need only two ingredients that can be found in any home. It is a liquid soap and hair shampoo.

Mix liquid soap and shampoo in equal proportions until smooth.
Place in the refrigerator for 24 hours.
Get it out and have fun.

As this slime is composed of water-soluble substances, keep it dry. The toy softens quickly from the warmth of the hands; it must be stored in the refrigerator. And do not allow contact with dust and dirt, it will not be possible to wash the slime. With a careful attitude, such a toy will last about a month.

From hand cream and perfume

You can even make a slime from hand cream. There is no guarantee that the toy will work out, but it's worth a try.

Squeeze the cream into a bowl.
Add paint and stir.
While adding perfume little by little, mix everything thoroughly. The mixture will begin to thicken.
After achieving the desired consistency, knead the toy with your hands.

Of flour

Often, parents are afraid to give slime to young children for fear that they will pull it into their mouths. For such a case, you can make a completely safe, edible slime without chemicals.

For this you will need:

flour - 400 g;
cold water - 50 ml;
hot water - 50 ml;
food coloring.

Sift flour into a bowl, mix with dry color.
Add cold water, stir again.
Pour in hot water, knead the resulting dough well. It should come out smooth and free of lumps.
Refrigerate the dough for a few hours.
Knead well again with your hands.

Not all products and substances are suitable for making slime. Not everything that looks like a slime has necessary properties... In order not to make mistakes, watch the video.

Video experiments on making slimes from different ingredients

How to give the slime the desired properties

Even if the slime is not what you wanted, you can fix it.

The vinegar will make the toy more elastic. Pour in a few drops and the slime will stretch better.
By adding hydrogen peroxide, you get a fluffy mass, this is how fluffy slime is made.
A few drops of glycerin will help make the toy slippery.
Glowing Slime can be obtained using fluorescent paint.
If the slime is too soft, place it in a jar, put a few crystals of salt there, close the lid tightly and leave it overnight. The salt will pull out excess water and will return elasticity to the toy.
Slime that is too hard will be softer if you put it in a container overnight and pour in a few drops of water.
To make the toy smell good, flavor it essential oil, food flavoring or vanilla.
Magnetic slime can be made by adding fine metal filings or iron oxide to it. Knead the toy well to distribute the additive evenly. And then your slime, as if alive, will reach for any magnet.
An antistress toy is made by putting mucus in a balloon. This can be done with a large syringe without a needle.
To enlarge the slime, place it in a container of water for 3 hours. Do not be alarmed if it falls apart, it should be. Add some salt and hand or body cream. Stir. Slime will not only restore elasticity, but also become larger.

Advice! Add multi-colored to the soft slime foam balls... This will make it colorful and increase in volume.

Storage and care rules

Slime is a capricious toy and its life span is short. To prolong it, you need to know how to properly store and care for the slime.

The slime is kept in plastic container with a tightly closed lid.
To prevent the slime from drying out, keep it away from heat sources, do not leave it in the sun.
Dried slime can be revived with a drop of water, wet with salt.
You need to play with the slime. Long storage can lead to mold. Such a toy will have to be thrown away.
Frequent use will lead to rapid contamination of the toy and loss of properties.
Avoid contact with fuzzy surfaces, the slime will collect hairs and become unusable.

Lizunas are not just a children's toy, some species have and practical use... For example, they can clean a computer keyboard or clothes from adhering debris. Elastic develop fine motor skills, increase the strength of the fingers. And they just calm down, relieve stress and give good mood... Make slimes and play, it's so exciting!

Slime is a funny children's toy. The tacky wonder sticks easily to a hard surface and takes on a variety of shapes. The content of sodium tetraborate in the toy is alarming for parents and children are refused to buy it. Try to make a slime with your own hands without harmful substance, a safe toy will delight the kid and bring him pleasure from the game.

We make a slime from glue and starch without sodium tetraborate

Prepare:

starch. With liquid starch, no water is required;
half a glass of water;
a few drops of gouache or food coloring;
enameled dish;
spoon or stick;
plastic bag;
100 g PVA glue.

Pour warm water into a bowl and carefully add the starch. Stir with a spoon without stopping. Pour enough starch so that the mixture comes out thick, but without lumps and not solid. Add the dye and allow the mixture to cool to room temperature.

Transfer the mixture to a bag and add glue. Shake the sachet to mix well. Shake until you get a viscous, homogeneous mass. Drain off excess liquid carefully. Store the finished toy in a container with a tight lid, otherwise it will dry out. If it is dry, place it in warm water for 5 minutes, and the sticky lump will become as good as new.

Making shampoo slime without sodium tetraborate

Take any shampoo, a little color and Titan glue. The fresher the glue, the better the sticky slime will be. Shampoo will give your toy a pleasant scent. Prepare a plastic bag, use rubber gloves for work. Next, your actions are as follows:

put glue, shampoo in a bag and drip a little color or add food coloring. The ratio of glue to shampoo is three to two;
mix everything until you get a viscous and thick mass;
put the sticky miracle on a napkin and let it sit and harden.

Give the slime to the child, and the child enjoys an exciting game.

We make a slime from gelatin and plasticine without sodium tetraborate

Prepare 100 g of plasticine, 20 g of gelatin and 100 ml of boiled cold water. Prepare a gummy substance:

pour the gelatin into a bowl;
fill with water and set aside for 40-50 minutes;
heat the settled mixture. Do not bring to a boil! Make sure that all gelatin particles are well dissolved.

Melt the plasticine in another vessel. Cut it into small pieces in advance. Pour 50 ml of water into a saucepan, place on the stove and bring to a boil. Dip the crushed plasticine into boiling water, and stir until a homogeneous mass is obtained. No need to boil over a fire! Add the cooled gelatin to the plasticine and mix the mixture thoroughly with a spoon. The toy can be played as soon as the slime cools down. But this method is rarely used, because the slime is enough for several days.

Making slime from flour and water without sodium tetraborate

There is no chemistry in the toy. The recipe is the simplest, as are the ingredients. Pour a glass of sifted flour into a metal bowl. Pour in cold water first, and then very hot. Add natural color such as carrot juice or beetroot juice. Take so much water that the mixture comes out thick in moderation, homogeneous and viscous. Stir constantly while adding water. Stir until smooth. We put it in a small bag or in a glass container with a tight lid.

Place the slime in the refrigerator for three hours. Store the toy in the same place. On the street, play with a slime must be careful, the mass may dry out.

Safety rules for making slime without sodium tetraborate

After playing with Sticky Miracle, wash your and your baby's hands. Although the toy is not toxic, make sure that the child does not pull it into the mouth. When making a slime, use the following recommendations:

use rubber gloves to make a sticky lump;
use an apron or wear old clothes if working with dye or gouache. They leave stains on clothes and hands;
use separate dishes for preparing any mixture, in which you will not cook food;
add glitters, small decorative details as desired. Experiment with the composition of the toy.

The shelf life of a toy, safe for a child, made by yourself without adding sodium tetraborate, is from two days to a week. Ingredients for making are always found in the house. And the process of creating a sticky miracle together with parents will give the baby a lot of pleasant impressions.

Also on the topic

Apple Rice Casserole How to Make Apple Rice Casserole

Chokeberry jam: recipes

Awesome recipes for zucchini in tomato sauce for the winter you will lick your fingers with and without sterilization

Fried zucchini in tomato sauce how to cook

Canape "Herring under a fur coat