2nd category
Description of the work. Checking and acceptance of simple fixtures, dies, cutting and measuring tools, processed within 12-14 grades, according to templates, calibers and limit brackets. Registration of acceptance documentation.
Must know: the purpose of the tools and devices used; rules and technical conditions for inspection and acceptance of control and measuring and cutting tools, stamps, devices; rules for drawing up acceptance documentation; system of tolerances and landings; qualities and roughness parameters.
3rd rank
Description of the work. Inspection and acceptance of working and measuring tools, devices, fixtures and stamps of varying complexity, processed within 11-12 grades.
Must know: device of tools and devices of varying complexity; rules for the acceptance of special and universal measuring tools, cutting tools, devices, stamps, conductors and devices of varying complexity; tolerances and landings; types of threads and thread tolerances.
4th grade
Description of the work. Checking, disassembling, adjusting, testing and checking weighing instruments of all systems and classes (except for exemplary, analytical, wagon and technical class 1), as well as complex measuring and cutting tools, dies and fixtures after final assembly and finishing, observing the dimensions according to 7- 10 qualifications. Identification and elimination of defects. Checking measuring instruments and weights. Calculation of the error of weighing instruments when checking. Checking the correctness of the use of weighing instruments and weights, depending on their purpose. Certification of weighing devices. Acceptance, disassembly, adjustment, testing and certification after checking the special tool.
Must know: device of pressure and vacuum weighing devices, electrical and radio measuring devices, micromanometers, etc., classification of weights, control and measuring devices and tools, stamps and devices and rules for their use; errors of mass measurement allowed by instruments and weights; weighing methods on various weighing instruments; system of tolerances and landings; qualities and roughness parameters; rules for the acceptance of various measuring and cutting tools and methods for checking weighing, radio and electrical devices, pressure and vacuum devices and special tools; the order of registration of certification documents and branding.
Work examples
- Indicators, armholes, rings, gauges, pressure gauges and other special tools - check, adjustment and certification.
- Weighing devices - checking, certification and branding.
- Electrical and radio measuring devices and pressure and vacuum devices for 1-4 grades - checking, certification.
5th grade
Description of the work. Checking, disassembling, adjusting, checking and testing exemplary, analytical, carriage and technical scales of class 1, complex measuring and cutting tools, instruments, stamps and fixtures after their final assembly and finishing in compliance with dimensions for 6-7 grades. Certification and branding after verification. Acceptance, inspection, adjustment and testing of special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0.
Must know: rules for checking, disassembling and adjusting weighing instruments, the procedure for certification and branding them; purpose, arrangement of control devices used to check electrical and radio measuring devices and pressure and vacuum devices, and the procedure for working with them; methods of checking all kinds of instrumentation and instruments.
Work examples
- Technical, wagon, analytical and exemplary scales - checking and branding.
- Special tools of special accuracy and complexity - checking and certification.
- Manovacuum meters MVP-2.5 type II category of class 0.05 - check and certification.
- Pressure and vacuum devices up to class 1.0 - acceptance, inspection and certification.
- Devices such as IL-13, UP4-1M, UIP-1, ANT - verification and certification.
- Devices of the type M-109, MOR-60, LM-1 - checking and certification.
- Chronometers - check, adjustment and certification.
- Electron-beam oscilloscopes of the ENO-1 type and the VK7-4 type device - verification and certification.
6th grade
Description of the work. Inspection of complex optical instruments, coordinate machines, assembly and test stands, spatial templates, complex conductors for drilling a hole in three or four planes at different angles after their final assembly and finishing in compliance with the 5-grade dimensions. Checking accurate and complex patterns with the location of planes in various projections of 1-4 quality. Setting up instruments for checking involute, spiral and pitch and performing calculations related to their verification.
Must know: the design of complex optical devices, coordinate machines, assembly and test stands, etc .; method of measuring spatial patterns, design and technology of their manufacture; methods for calculating dimensions given in space; the calculation methodology required to check the involute, spiral and pitch; rules for issuing passports, acceptance certificates.
Secondary vocational education is required.
Work examples
- Special complex tools - checking and certification.
- Universal microscopes, comparators, interferometers - verification and certification.
- Multi-seat molds of complex configuration - production control and adjustment.
- Optical measuring devices - checking and certification.
- Body stamps - production control and adjustment.
Job controller of measuring instruments and special tools vacancies controller of measuring instruments and special tools in Russia. Vacancy controller of measuring instruments and special tools from a direct employer in Russia job advertisements controller of measuring instruments and special tools Russia, vacancies of recruitment agencies in Russia, looking for a job controller of measuring instruments and special tools through recruitment agencies and from direct employers, vacancies controller of measuring devices and special tools with and without work experience. Site of ads for part-time work and work Avito Russia job vacancies controller of measuring instruments and special tools from direct employers.
Work in Russia - controller of measuring instruments and special tools
Site work avito Russia work fresh vacancies controller of measuring instruments and special tools. On our site you can find a highly paid job as a controller of measuring instruments and special tools. Look for a job as a controller of measuring instruments and special tools in Russia, browse vacancies on our job site - an aggregator of vacancies in Russia.
Avito jobs Russia
Work as a controller of measuring instruments and a special tool on a website in Russia, vacancies as a controller of measuring instruments and a special tool from direct employers in Russia. Jobs in Russia without work experience and highly paid with work experience. Jobs controller of measuring instruments and special tools for women.
Unified tariff and qualification reference book of jobs and professions of workers (ETKS), 2019
Part No. 2 of issue No. 2 ETKS
The issue was approved by the Resolution of the Ministry of Labor of the Russian Federation of 15.11.1999 N 45
(as amended by the Order of the Ministry of Health and Social Development of the Russian Federation of 13.11.2008 N 645)
Measuring instruments and special tools inspector
§ 34. Controller of measuring devices and special tools of the 2nd category
Description of works... Checking and acceptance of simple fixtures, dies, cutting and measuring tools, processed within 12-14 grades, according to templates, calibers and limit brackets. Registration of acceptance documentation.
Must know: the purpose of the tools and devices used; rules and technical conditions for inspection and acceptance of control and measuring and cutting tools, stamps, devices; rules for drawing up acceptance documentation; system of tolerances and landings; qualities and roughness parameters.
§ 35. Controller of measuring devices and special tools of the 3rd category
Description of works... Inspection and acceptance of working and measuring tools, devices, fixtures and stamps of varying complexity, processed within 11 - 12 grades.
Must know: device of tools and devices of varying complexity; rules for the acceptance of special and universal measuring tools, cutting tools, devices, stamps, conductors and devices of varying complexity; tolerances and landings; types of threads and thread tolerances.
§ 36. Controller of measuring devices and special tools of the 4th category
Description of works... Checking, disassembling, adjusting, testing and checking weighing instruments of all systems and classes (except for exemplary, analytical, wagon and technical class 1), as well as complex measuring and cutting tools, dies and fixtures after final assembly and finishing, observing the dimensions of 7 - 10 qualifications. Identification and elimination of defects. Checking measuring instruments and weights. Calculation of the error of weighing instruments when checking. Checking the correctness of the use of weighing instruments and weights, depending on their purpose. Certification of weighing devices. Acceptance, disassembly, adjustment, testing and certification after checking the special tool.
Must know: device of pressure and vacuum weighing devices, electrical and radio measuring devices, micromanometers, etc., classification of weights, control and measuring devices and tools, stamps and devices and rules for their use; errors of mass measurement allowed by instruments and weights; weighing methods on various weighing instruments; system of tolerances and landings; qualities and roughness parameters; rules for the acceptance of various measuring and cutting tools and methods for checking weighing, radio and electrical devices, pressure and vacuum devices and special tools; the order of registration of certification documents and branding.
Work examples
1. Indicators, armholes, rings, gauges, pressure gauges and other special tools - check, adjustment and certification.
2. Weight measuring devices - checking, certification and branding.
3. Electrical and radio measuring devices and pressure and vacuum devices for 1 - 4 qualifications - verification, certification.
§ 37. Controller of measuring devices and special tools of the 5th category
Description of works... Checking, disassembling, adjusting, checking and testing exemplary, analytical, carriage and technical scales of the 1st class, complex measuring and cutting tools, instruments, stamps and fixtures after their final assembly and finishing in compliance with the dimensions for 6-7 grades. Certification and branding after checking. Acceptance, inspection, adjustment and testing of special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0.
Must know: rules for checking, disassembling and adjusting weighing instruments, the procedure for certification and branding them; purpose, arrangement of control devices used to check electrical and radio measuring devices and pressure and vacuum devices, and the procedure for working with them; methods of checking all kinds of instrumentation and instruments.
Work examples
1. Technical, wagon, analytical and exemplary scales - checking and branding.
2. Special tools of special accuracy and complexity - checking and certification.
3. Manovacuum meters of type MVP-2.5 of the II category of class 0.05 - checking and certification.
4. Devices for pressure and vacuum up to class 1.0 - acceptance, verification and certification.
5. Devices such as IL-13, UP4-1M, UIP-1, ANT - verification and certification.
6. Devices of the type M-109, MOR-60, LM-1 - verification and certification.
7. Chronometers - check, adjustment and certification.
8. Cathode-ray oscilloscopes of the ENO-1 type and the VK7-4 type device - verification and certification.
§ 38. Controller of measuring devices and special tools of the 6th category
Description of works... Inspection of complex optical instruments, coordinate machines, assembly and test stands, spatial templates, complex conductors for drilling a hole in three or four planes at different angles after their final assembly and finishing in compliance with the 5-grade dimensions. Checking accurate and complex patterns with the location of planes in various projections for 1 - 4 quality. Setting up instruments for checking involute, spiral and pitch and performing calculations related to their verification.
Must know: the design of complex optical devices, coordinate machines, assembly and test stands, etc .; method of measuring spatial patterns, design and technology of their manufacture; methods of calculating dimensions given in space; the calculation methodology required to check the involute, spiral and pitch; rules for issuing passports, acceptance certificates.
Secondary vocational education is required.
Work examples
1. Special complex tools - checking and certification.
2. Universal microscopes, comparators, interferometers - verification and certification.
3. Multi-seat molds of complex configuration - production control and adjustment.
4. Optical measuring devices - verification and certification.
5. Body stamps - manufacturing control and adjustment.
This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.
| Instructions for the position " Controller of measuring devices and special tools of the 5th category"presented on the site complies with the requirements of the document -" REFERENCE BOOK of qualification characteristics of workers' professions. Issue 42. Metal processing. Part 1. Managers, professionals, specialists, technical employees. Part 2. Workers. Book 1. "Metal casting", "Metal welding". Book 2. "Drawing, squeezing, cold stamping of metal. Production of heating boilers, metal tanks and similar products", "Forging, high and low temperature metal processing". Book 3. "Turning, drilling, milling and other types of metal and material processing", "Metal coating with metals. Painting". Book 4. "Coating of metals with non-metals: enamel and other types of coating", "Locksmith and assembly work in the production of machines" ", which was approved by the order of the Ministry of Industrial Policy of Ukraine on March 22, 2007 N 120. Approved by the Ministry of Labor and Social Policy of Ukraine. since April 2007 The status of the document is "valid". |
|
Preface to job description
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. This document is checked periodically at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Controller of measuring devices and special tools of the 5th category" belongs to the category "Workers".
1.2. Qualification requirements - incomplete higher education (junior specialist) without requirements for work experience or vocational education, advanced training and work experience by profession controller of measuring instruments and special tools of the 4th category - at least 1 year.
1.3. Knows and applies in activities:
- rules for checking, disassembling and regulating weighing instruments, the procedure for their certification and branding;
- purpose, structure of control devices, which are used to check electrical and radio measuring pressure and discharge devices and the procedure for working with them;
- methods of checking any complex instrumentation and instruments.
1.4. The controller of measuring devices and special tools of the 5th category is appointed and dismissed by order of the organization (enterprise / institution).
1.5. The meter and special tool controller of the 5th category reports directly to _ _ _ _ _ _ _ _ _ _.
1.6. The controller of measuring devices and special tools of the 5th category supervises the work of _ _ _ _ _ _ _ _ _ _.
1.7. During the absence, the controller of measuring instruments and special tools of the 5th category is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Description of work, tasks and duties
2.1. Accepts, disassembles, adjusts, checks and tests exemplary, analytical, laboratory and technical scales of the 1st class, especially complex measuring and cutting tools, fixtures, dies and devices after their final assembly and processing in compliance with the dimensions for the 6-7th grade (1 - 2 classes of accuracy).
2.2. Certifies and brands them after verification.
2.3. Accepts, checks, regulates and tests special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0.
2.4. Knows, understands and applies the current regulatory documents concerning his activities.
2.5. Knows and fulfills the requirements of regulatory enactments on labor protection and the environment, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. The controller of measuring devices and special tools of the 5th category has the right to take action to prevent and eliminate cases of any violations or inconsistencies.
3.2. The controller of measuring devices and special tools of the 5th category has the right to receive all social guarantees provided by law.
3.3. The controller of measuring devices and special tools of the 5th category has the right to demand assistance in the performance of his official duties and the exercise of rights.
3.4. The controller of measuring devices and special tools of the 5th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.
3.5. The controller of measuring devices and special tools of the 5th category has the right to get acquainted with the draft documents relating to his activities.
3.6. The controller of measuring instruments and special tools of the 5th category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.
3.7. The controller of measuring devices and special tools of the 5th category has the right to improve his professional qualifications.
3.8. The controller of measuring devices and special tools of the 5th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. The controller of measuring instruments and special tools of the 5th category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. The controller of measuring devices and special tools of the 5th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.
4.2. The controller of measuring devices and special tools of the 5th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. The controller of measuring devices and special tools of the 5th category is responsible for disclosing information about an organization (enterprise / institution) related to trade secrets.
4.4. The controller of measuring devices and special tools of the 5th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and legal orders of the management.
4.5. The controller of measuring devices and special tools of the 5th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. The controller of measuring devices and special tools of the 5th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The controller of measuring devices and special tools of the 5th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
5. Examples of work
5.1. Technical, wagon, analytical and exemplary scales - checking and branding.
5.2. Cathode-ray oscilloscopes ENO-1 and device of type VK7-4 - check and certification.
5.3. Special tools of special accuracy and complexity - checking and certification.
5.4. Manovacuum meters MVP-2.5 type II category of class 0.05 - check and certification.
5.5. Pressure and vacuum devices up to class 1.0 - acceptance, verification and certification.
5.6. Devices such as IL-13, UP4-1M, UIP-1, ANT - verification and certification.
5.7. Devices of the type M-109, MOR-60, LM-1 - verification and certification.
5.8. Chronometers - check, adjustment and certification.
\Typical job description of the 4th grade meter controller
Job description of the 4th category measuring instrument controller
Position: Controller of measuring devices of the 4th category
Subdivision: _________________________
1. General Provisions:
- Subordination:
- The 4th grade metering controller is directly subordinate to ........................
- The controller of measuring devices of the 4th category follows the instructions ......................................... ...........
- The 4th grade measuring instrument controller replaces .......................................... .......................................
- The controller of measuring devices of the 4th category is replaced by .......................................... .....................................
(the instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).
Substitution:
Reception and dismissal:
The instrumentation controller is appointed and dismissed by the head of the department in agreement with the head of the department.
- Must know:
- device of pressure and vacuum weighing devices, electrical and radio measuring devices, micromanometers, etc., classification of weights, control and measuring devices and tools, stamps and devices and rules for their use
- errors of mass measurement allowed by instruments and weights
- weighing methods on various weighing instruments
- system of tolerances and landings
- qualities and roughness parameters
- rules for the acceptance of various measuring and cutting tools and methods for checking weighing, radio and electrical devices, pressure and vacuum devices and special tools
- the order of registration of certification documents and branding.
- Checking, disassembling, adjusting, testing and checking weighing instruments of all systems and classes (except for exemplary, analytical, wagon and technical class 1), as well as complex measuring and cutting tools, dies and fixtures after final assembly and finishing, observing the dimensions according to 7- 10 qualifications.
- Identification and elimination of defects.
- Checking measuring instruments and weights.
- Calculation of the error of weighing instruments when checking.
- Checking the correctness of the use of weighing instruments and weights, depending on their purpose.
- Certification of weighing devices.
- Acceptance, disassembly, adjustment, testing and certification after checking the special tool.
page 2 Job description Instrument controller
4. Rights
- The controller of measuring instruments has the right to give instructions to subordinate employees, assignments on a range of issues included in his functional duties.
- The controller of measuring instruments has the right to control the execution of production tasks, the timely execution of individual orders by employees subordinate to him.
- The controller of measuring instruments has the right to request and receive the necessary materials and documents related to the issues of his activities and the activities of employees subordinate to him.
- The controller of measuring instruments has the right to interact with other services of the enterprise on production and other issues that are part of his functional responsibilities.
- The controller of measuring devices has the right to get acquainted with the draft decisions of the enterprise management concerning the activities of the Division.
- The controller of measuring devices has the right to propose for the manager's consideration proposals for improving the work related to the duties provided for in this Job Description.
- The controller of measuring devices has the right to submit to the head for consideration proposals on the promotion of distinguished workers, the imposition of penalties on violators of production and labor discipline.
- The controller of measuring instruments has the right to report to the head of all identified violations and shortcomings in connection with the work performed.
- The controller of measuring instruments is responsible for the improper performance or failure to perform his duties provided for by this job description - within the limits determined by the labor legislation of the Russian Federation.
- The meter inspector is liable for violation of the rules and regulations governing the activities of the enterprise.
- Upon transfer to another job or dismissal from office, the Controller of Measuring Instruments is responsible for the proper and timely delivery of cases to the person taking the current position, and in the absence of such, to the person replacing him or directly to his manager.
- The controller of measuring instruments is responsible for offenses committed in the course of carrying out his activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
- The controller of measuring devices is responsible for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
- The controller of measuring devices is responsible for compliance with the applicable instructions, orders and orders for the preservation of commercial secrets and confidential information.
- The meter controller is responsible for compliance with internal regulations, safety and fire safety regulations.
Head of structural