Repair is a necessary thing, but not always pleasant. This is due to financial waste, physical effort and some other inconvenience. However, everyone will agree that the end result is worth it. In addition, the materials from which the repair is carried out play an important role. Today we will look at the decorative finish of the toilet.
The place is small, but very necessary. It has its own characteristics, including high humidity inside. And this means that the finishing material must withstand such an environment. One of the great options are plastic panels.
Why is this material special? What are its advantages and disadvantages? How is the toilet finished with plastic panels with your own hands? We will cover all this in this article. We will provide step-by-step instructions, and also see how the toilet is finished with plastic panels video tutorials.
Features of PVC products
What is good about this material? Let's start with the fact that among the many finishing materials, plastic panels occupy a worthy place. And for the toilet they are just perfect. Why can you say so? The toilet has its own characteristics. That is why durable moisture-resistant materials are used for its decoration. Often tiles are bought for this purpose. But, its cost is much higher than the cost of plastic products. The toilet itself is quite small, so working with tiles is inconvenient.
Another thing is plastic elements. With almost the same characteristics, they are much cheaper and easier to work with. Finishing the toilet with plastic panels can be done by hand. Here are other features of the material that are important to consider:
If we talk about the shortcomings, then they are the lack of strength of the panels, burning and their ability to fade. But, for the toilet, the second factor is not relevant, since usually there are either no windows in it at all, or they are made very small. So the sun's rays can not spoil the material. And with careful use, it will be difficult to damage the surface.
Options for finishing the toilet with plastic panels photo.
Immediately before finishing the walls, you need to purchase material. How to do it?
Choosing plastic panels for the toilet
So that the work was not done in vain, and the finish looked decent and was durable, it is important to choose the right materials. On the shelves of stores you can find a variety of products, but how to choose the right one? We immediately note that demand creates supply. And since the panels are popular, you can get to an unscrupulous manufacturer. Determining a defective product can be difficult. What will help in this? Let's look at a few tips.
Thanks to these tips, you can save yourself the opportunity to buy low-quality building materials. The right choice of materials is already 50% of the work on high-quality finishing of the toilet. This is what the correct wall decoration in the toilet looks like with plastic panels in the photo.
Getting ready to install PVC panels
The first stage of work is preparation. If the panels have already been purchased, then it is time to take care of other tools and materials. The principle of mounting PVC panels resembles clapboard trim. Therefore, the work will require the creation of a frame. It can be metal or wood. We recommend that you refuse the wooden one, because the toilet is a wet room, the tree can rot and quickly fail.
To create a metal frame you will need:
In addition, the work can not do without such tools:
- screwdriver or drill driver;
- metal scissors;
- kleimers, self-tapping screws or a stapler for fixing panels to the frame;
- special profiles and skirting boards for plastic;
- tape measure, level, pencil;
- hacksaw for plastic;
- metal spatula;
- stationery knife.
When everything is assembled, you can begin to prepare the walls of the toilet.
Preparing the walls
Break, as they say, do not build. The first task is to remove the old finish from the walls. The good news is that the toilet is small, so it won't take much time. Using a spatula, you need to remove the old finish. The work is easy, but time consuming. Then the walls are cleaned of dust and dirt.
Note! So that nothing interferes with you during work, you should remove all unnecessary from the toilet.
When the surface is prepared, you can begin to create a frame or crate on the wall. The features and pluses of this finishing method are that in the space under the plates you can hide the wiring or insulate the toilet. Consider a step-by-step instruction for creating a metal frame.
We mount a metal frame
The main task is to make the frame even and correct, so you can not do without marking and controlling the process with a level. Since the panels will be mounted in a vertical position, the frame for them is made in a horizontal position. The creation instructions are as follows:
That's all, the frame for the walls is ready. Finishing the toilet with plastic panels (frame stage) do-it-yourself video.
Installation of plastic panels
Further work is to use plastic moldings. What are they needed for? PVC strips must be inserted into the appropriate grooves, this applies to the floor, ceiling and corners. For each case there is a molding. The photo shows exactly how to implement this in practice and what kind of molding is needed in this or that case.
That's it, the walls are ready. To make it easier for you, you can view the following information: wall decoration in the toilet with plastic panels video.
This is how the toilet decoration with plastic panels looks like photo.
Ceiling trim with plastic panels
If everything is clear with the walls, then the next step is the ceiling. It is recommended to trim it with panels too. It will look harmonious. Moreover, if you yourself learned how to decorate the walls with panels, then there will be no problems with the ceiling. Here the principle of work is the same. It all comes down to the following steps:
- Marking on the wall.
- Fixing the crate and other elements.
- Installation of ceiling molding around the perimeter.
- Installation of plastic panels.
As for the ceiling, there are some nuances here. For example, in the slats, you need to make appropriate holes for fixtures. For the toilet, it is better to use built-in spotlights. To do this, markings are made in the appropriate place, and a hole is cut out in the panel using a special bit for a screwdriver. The work is easy. We have prepared a visual video on how to complete the work from start to finish (mounting on walls and ceilings). Let this apply to the bath, but the principle of operation does not change. Finishing the toilet with plastic panels video.
Conclusion
Now your toilet is ready for full functioning. Repairs in the toilet were made at minimal cost. As you can see, all the work is quite simple. If you try, then after 1-2 days the toilet will be ready. Plastic panels are an excellent material that is easy to work with, it will last a long time, and there will be no problems with its operation. The toilet will look like new. And due to the fact that the surface of the products is glossy, it will visually increase the small space in the room. With such work experience, you can successfully finish not only the toilet, but the apartment as a whole. Such skills will be useful in life.
For every home master, do-it-yourself repairs are a matter of special pride. However, what to do if the owner of the apartment has no experience in construction and finishing work? In such a situation, it is better to refuse to carry out repairs in the living room and in the kitchen with your own hands. To gain the necessary experience in renovating premises, you can start small - clean up the toilet.
This choice is quite logical, since the bathroom is the smallest among the premises of the apartment. In addition, a wide variety of materials are offered on the market, which allows the home master to implement absolutely any design when performing repairs in this room. Ideas for decorating the toilet can be found on the Internet. Even if the repair in the toilet with your own hands fails, there is always the opportunity to turn to real professionals. They will fix all the bugs in the design of the toilet and make the room beautiful.
When creating a toilet design, many apartment owners use material such as plastic panels. They are inexpensive, and with their help you can independently repair the bathroom.
Types and characteristics
PVC panels are made by forcing the initial liquid mass through a forming hole. As a result, air space is formed in the panels. This feature of the material ensures its low weight. Manufacturers produce plastic panels in the following sizes:
- width - 12.5-50 cm;
- length - 260-300 cm;
- thickness - 8-12 mm.
According to such a criterion as the scope of plastic panels are divided into wall and ceiling. The former are distinguished by higher strength characteristics and have good resistance to mechanical damage. If we talk about ceiling, then their feature is good flexibility and minimal weight.
Many people, when it comes to bathroom renovations, opt for PVC slats. They make such a decision, focusing on the advantages of this material. Among his most significant virtues can include the following:
Disadvantages of PVC panels
Like any material, PVC panels have certain disadvantages. It is worth knowing about them for apartment owners who have conceived DIY bathroom decoration.
When the toilet is finished with this material, it is fixed on the rails. As a result, the free space in the room is reduced. This is especially not liked by those apartment owners who have standard separate bathrooms.
If your apartment is subjected to a flood, then the task of drying the room will become quite difficult. Water will easily seep into the interpanel seams, and it will evaporate for a long time. This can lead to the occurrence of such unpleasant phenomena as mold and fungus. In some cases there is a need for partial dismantling of the panels.
The choice of plastic panels for finishing the toilet
Each apartment owner, when performing repairs, of course, strives to get an interesting design of the room as a result. Such a desire arises not only during the repair of the living room, but also when the lining of the toilet is carried out, which should also look attractive. Many people opt for plastic panels, which are inexpensive and easy to install.
A beautiful toilet can be obtained if you approach the task of choosing it correctly. And to do this is not so easy. And it's not just that there is a wide variety of PVC panels on the market. Often unscrupulous sellers offer defective products. In order to buy really high-quality material, it is necessary when choosing plastic panels to remember the following recommendations:
- plastic panels that will be used to decorate the toilet in your own apartment should be made of PVC with additives that increase the elasticity of the material. The smaller they are, the more brittle the plastic is. The presence of additives in the composition of the material can be determined in a fairly simple way. It is necessary to take the panel at arm's length and begin to bend. Do this until you feel strong resistance. If the plastic has high quality characteristics, then it can be easily bent into a ring. The worse the quality of the material, the smaller the bending radius;
- When choosing PVC panels, you should pay attention to the material from which the lamellas are made. It should not emit any odors. If you feel a chemical smell, then you should refuse to purchase such panels and look for something else.
How to sheathe a toilet with plastic panels?
Finishing the toilet with plastic panels with your own hands is not a difficult task. If you have the skills to work with a tool, then you can easily master the installation of PVC panels. Competently carrying out this work will allow you to create an interesting design in the toilet. To make your wish come true - make quality toilet repairs in the apartment, you need to find free time in your schedule and prepare the necessary materials and tools before starting work.
Of course, in order to create a beautiful toilet in your apartment, you cannot do without materials and tools. To cover the toilet with plastic panels, you will need:
Do not immediately rush to the store to purchase panels. First, you should measure the area of \u200b\u200bthe toilet in which you plan to carry out finishing work. When you receive material calculations, then 15% should be added to this amount, which will be used for cuts.
Preparatory work
Covering the toilet with PVC material for many apartment owners is the best solution when renovating a bathroom. For that to make everything go smoothly and in the end you got a beautiful toilet with an interesting design, repairs in this room should begin with preparatory work. Experts recommend that the first step is to remove the old finishing material from the walls. This will slightly increase the usable space of this room.
Even before the start of work, work should be carried out to replace water pipes and electrical wiring. Walls before installation of the material should be treated with a primer. Choose a primer that has antibacterial properties. In this case, at high humidity, mold and fungus will not appear on the walls under the panels.
Before you start working with plastic panels, you should also think about where the sink and cabinets will be placed in the bathroom. In these places, additional strips should be provided. It is on them that the accessories will be fixed. Before doing material installation, it is necessary to keep the lamellas at room temperature for several hours.
How to finish the toilet with plastic panels: installation
The first step is to fix the aluminum profile rails or plastic rails on the wall. In a horizontal orientation, the installation of a wall crate is performed. The ceiling is laid perpendicular to the direction of laying the material. A step of 50 cm is maintained between the guides. Some designers opt for a diagonal fastening of the material. If you like such an original design option, then you should know that its implementation will lead to an increase in material costs.
You can immediately fix the U-shaped corner profiles. Next, the first panel is carefully inserted and fixed with prepared self-tapping screws. Some craftsmen use a construction stapler to secure the panels. . However, this type of fixation can only be used in relation to the wooden crate, which is a completely unsuitable material in the toilet.
Next, step by step, you should fasten the following panels, which must be pressed very tightly to the previous ones. The crucial moment when installing PVC lamellas in the toilet is the fastening of the last panel. An accurate calculation of the remaining width must be made. If you do not pay attention to this moment, you can ruin the entire structure.
You can proceed to work such as lining the ceiling in the toilet only after all the work on mounting the panels on the walls has been completed.
If your plans include spot lighting in the toilet, then you need to cut holes according to the size of the lighting fixtures. In addition, it is necessary to make holes in the installation sites of sockets and switches, as well as ventilation pipes. Cutting material for wall and ceiling decoration must be done from the front using a jigsaw or hacksaw with a tooth pitch of 1 mm.
When the panels are fixed, you can proceed to install the decorative plinth. You can choose products made of plastic or ceramic.
Conclusion
When repairing a toilet, many apartment owners choose PVC panels for surface finishing. To get a beautiful finish of the toilet with plastic panels, photo design projects on the Internet should be studied first. This will help determine the design of the room.
It is not difficult to create a beautiful toilet in your home. Just need to find free time and prepare materials and tools. High-quality repair of the toilet with plastic panels will allow you to get an aesthetic design of this room. Its original design will be a source of pride for the home master.
Despite the fact that the toilet is one of the most important rooms in the house, the owners try to leave repairs to the very last moment. In principle, the PVC paneling of the toilet can be carried out independently.
To do this, you only need to know what tools and materials will be needed, as well as the sequence of repair work and some features.
The fact is that this room in many apartments is considered the smallest, so it is quite difficult to carry out repair work in it with your own hands. With the involvement of professionals, the cost of repairs can be even higher than in the bathroom.
At the same time, the toilet room also requires a beautiful design and high-quality finish.
Advice. Before you decide on the choice of new finishing materials for the walls and ceiling in the toilet, you need to replace the old, obsolete, sewer and water pipes with new, more modern and reliable ones. Timely replacement of communications will avoid further repairs in the future.
As soon as these works are completed, you can proceed to the main work.
Given that the air in the toilet is less humid than in the bathroom, the choice of materials for lining the ceiling and walls is increasing. Finishing materials should be chosen in such a way that the walls and ceiling are easy to clean and do not absorb odors.
Therefore, the most ideal materials for the toilet are:
- washable wallpaper,
- ceramic tile,
- PVC panels.
The latter option, as practice shows, is considered the most convenient and economical option when finishing the toilet with your own hands.
Advantages of PVC panels
The advantages of PVC panels are that the range of these finishing materials is large, the buyer can choose a plain material for this room, panels with imitation of wood, marble, malachite, etc. You can create a brighter design in the toilet using PVC panels with abstract drawings and patterns.
In addition, the cost of panels per square meter, as a rule, does not exceed eight dollars.
So:
- The length of one plastic panel ranges from 2.5 to 3 meters. This makes it possible to use one sheet along the entire length of the wall.
- Another plus of this material is that it can be used for finishing not only walls, but also ceilings. True, for such surfaces it is better to use narrower plastic panels.
In this case, the ceiling covering will look more neat and harmonious. - In addition to all this, wall decoration with PVC panels for the toilet is much faster and easier. For wall cladding with this material, rough work on leveling and priming wall surfaces is not required.
The positive point is also that behind the panels you can easily hide all communications. - Installation of panels can be carried out without preliminary heavy leveling of the walls with plaster. You can quickly level even the most uneven and crooked walls using a special crate that can be mounted on the surface without removing some of the old coatings (wallpaper, whitewash, tiles and putty).
In addition, when creating a crate, special skills or any special knowledge are not required.
Finishing the toilet with pvc panels video instructions can be viewed right now.
PVC is considered the most attractive material due to its moisture resistance. The same coating allows for quick and very easy cleaning indoors.
Plastic panels are becoming more and more popular in the construction market today. This is no coincidence, because if you install such material in a toilet or bathroom, the room will look aesthetically pleasing and neat. The panels are easy to care for, they weigh a little. Take a closer look at this finish option when renovating a bathroom or toilet. The panel is attached to the frame with a stapler or self-tapping screws. Spotlights are built into the ceiling of this material.
Advantages of PVC
A plastic ceiling is the most correct solution, as it has advantages over other materials:
- not afraid of moisture;
- withstand temperature fluctuations in the room;
- does not absorb moisture;
- does not swell under the influence of moisture;
- at elevated temperatures does not increase in size;
- hygienic, does not allow the development of mold and fungus;
- thanks to the excellent reflectivity of the panels, the toilet becomes lighter, and because of this, the consumption of electrical energy is saved;
- electric wires that go to the lighting fixtures are removed under the panels;
- the surface of the walls and ceiling becomes even.
The plastic panel is a long strip with an average width of 25–30 cm. The end is cut off, and locks are arranged on the sides, with which the elements will be connected during installation.
In the photo - PVC in the context. Inside there are stiffening ribs. Therefore, the material is light, but at the same time durable.
Profiles for panels
This material is intended for decorative use of PVC panels on the ceiling or walls in a toilet or other room. It is divided into the following types.
- starting profile. Closes the cut ends of the panel. Fastened around the perimeter of the room.
- Profile F1 closes the cut end at the outer corner when it is required to change to another plane. It is used in the event that one of the walls is sheathed, but the one around the corner is not.
- Profile H (connecting). Serves to lengthen the strip, if it is not enough.
- The outer and inner corners are designed to cover the ends in the corresponding corners.
- The ceiling plinth is arranged in the same way as the starting profile, but has a more attractive appearance.
Pros and cons of installing PVC panels
Each of the materials intended for cladding has its own advantages over others. The PVC panel also has many positive properties:
- aligns the curvature of walls and ceilings in the premises, while it is not required to dismantle old coatings;
- installation is quick and easy;
- heat and sound insulation is laid behind the panels;
- lack of dust and "wet" process;
- affordable price.
Disadvantages of plastic:
- it will not be possible to complete a multi-level ceiling;
- some panels look "cheap";
- you can see the connection between the panels.
Therefore, when planning repairs in the toilet or bathroom, it is advisable to take a closer look at the quality of the material. After all, the better it is, the more expensive, and, accordingly, the appearance is more attractive. For this reason, the PVC panel is limited in application. It happens that when installing a lighting fixture, the plastic ceiling is translucent.
Important! Before you buy plastic material, weigh all the pros and cons so you don't regret it later.
Calculation of material for installation
First, calculate the area of \u200b\u200bthe ceiling in the toilet. Then divide the resulting figure by the total area of one PVC panel. Add 15% to the resulting number for trimming and round up to a whole number.
To calculate the amount of a metal profile, follow the ceiling diagram in the toilet, observing the scale. Determine where the parallel lines will go across the ceiling. They are necessary for attaching the profile. The interval between parallel stripes is at least 50 centimeters. Based on such calculations, it is easy to calculate the required amount of material.
To fix along the perimeter of the surface, you need to purchase a UD strip, and for guides - CD. To attach PVC strips to the profile, you will need self-tapping screws with wide caps.
A plastic plinth will help complete the work on finishing the ceiling. To calculate its amount, measure the perimeter of the ceiling, divide this number by three, and then round up.
Mounting the frame for PVC panels
The installation of the frame in the toilet is carried out using the above-mentioned profiles: CD and UD. Wooden slats are also used, but much less often, because wood is exposed to moisture, especially in a room such as a bathroom or toilet. The tree is subject to decay and will last less.
How to properly install the frame?
- Perform markup using a level. In a large room, it is better to use a long level, and in a small toilet, a simple rack tool will suffice. Marks are made for the guide profile. The location of suspended PVC panels on the ceiling depends on them.
- The profile, if necessary, is cut to the size of the room (profile length - 3 meters). It is drilled in increments of 50-60 centimeters. After that, the guide profile is applied to the wall, the holes are marked on it, the dowels are drilled and inserted. Each time check the horizontal level.
- The rigidity of the frame is given by the ceiling profile. The mount for it is chosen, taking into account the distance to the base: if the gap is insignificant, then you can use a U-shaped suspension. If it is large, then it is better to take quick hangers with knitting needles. Sometimes specialists make special “boots” for the UD frame. To do this, cut the metal with the letter "G" and attach it with the smaller side to the ceiling, and the larger one - to the carrier profile.
- Hangers are attached to the screws, checking by level. The step between the profiles is 50 centimeters, they are placed perpendicular to the PVC panels.
Definition of quality
When buying, carefully inspect the panels. Quality products are even, the pattern is evenly distributed. The face is smooth and even. Distortions and curvature of lines are not allowed.
Important! Count the number of stiffeners inside the panel. The more there are, the stronger the structure.
The thickness of the stiffening ribs and the outer walls of the plastic plays a role. Take two strips and try to connect them. The main thing is not the quality of the connection, but the ease of docking. There should not be a large gap between the stripes. To determine the strength of a material, take a strip and squeeze it hard, then inspect the surface. If it is not deformed or cracked, it is a quality material. But slight deformation is acceptable.
Check the strip for bending. To do this, bend and straighten it 3-4 times. If after this procedure the material survived, then you can work with it. Poor quality plastic will deteriorate during installation.
What is required to work with plastic?
An important role is played by the color solution. Today this is not a problem, and everyone will find an interesting option for themselves.
Sheathing the toilet is impossible without the source material and tools. You will need the following:
- A sharp knife to reduce the size of the plastic strips. A kitchen knife will ruin the material and cut unevenly.
- Self-tapping screws for fastening strips.
- Wooden bars for the frame with a section of 3 x 10 cm or the metal parts described above.
- With the planned fastening of the panels directly to the wall, you will need liquid nails or mounting foam.
- Any repair will not do without a tape measure.
- Building level for mounting the frame.
- The plinth is decorative, which is attached to the wall.
- profile corners.
Mount selection
Before starting work, determine how you are going to fix the panels: with mounting foam or using a frame.
The first option involves the purchase of foam cylinders. When purchasing a product, pay attention to the expiration date. Fresh foam will yield more. If the toilet is spacious and there are brick walls, it is not necessary to mount the frame. It is allowed to fix PVC panels on the glue "liquid nails". This work is not difficult, but it requires patience.
How to cut plastic material?
This process is easy. They take the strips and lay them on the base with the wrong side. Then make a cut with a sharp knife to make a line. The plastic is broken along it and again completely cut off with a knife along the intended line.
Preparation for work
Repair of the toilet and preparation for lining begins with cleaning: sockets, lighting fixtures, hoses, pipes are removed from the walls.
If a frame mounting method is chosen, it is more rational to use galvanized parts. If you took a wooden beam, treat it with an antiseptic.
First, the frame is mounted, and then the strips are installed where the panels are inserted. The work on facing the ceiling in the toilet starts from the corner. One edge of the PVC strip is inserted into the profile, and then the other side is attached to the screws
The next strip is easier to insert, it is pushed until a click occurs. And again, the other side is attached with self-tapping screws. Then install the plinth and decorative lining. With their help, you can veil defects and technological gaps. They are fixed with glue, as these are purely decorative details.
Almost everyone will be able to repair the toilet using PVC panels. The process is shown in detail in the video: