We make a rocking chair with our own hands: models made of wood and plastic. Pendulum rocking chair Diy rocking chair on a pendulum mechanism

This chair was made for himself by Vladislav Emelyanov. In my opinion, this is a great example of work when you really want to do something, but there are no drawings, as well as the skills in making them. Many are worth learning.

For everything about everything, banknotes were spent:

1500 - bars
1400 - fabric
500 - foam rubber
1000 - sewing covers
600 - fittings, screws, bolts

Total: about 5,000 rubles.

In the design part, Vladislav was helped by a girl who already had this chair - she took off the photographs with dimensions (they were filmed with a sewing meter). Then everything was adjusted to fit your needs. Here are these photos for people who want to repeat.

The process began with gluing 20 * 20 bars, because there were no suitable blanks available, which once again speaks of the author's determination

For this, such homemade clamps were used.

Further, from the end of each bar, cotter pins were hammered onto glue for greater strength.

Well, they were already sawing the bars themselves. I drew the roundings with a compass and cut them out with a jigsaw. Then he skimmed the whole thing - the most tedious process.

Thus, all the necessary parts were made.
We start with the manufacture of supports. We fasten to the horizontal parts vertical posts(self-tapping screws + glue)

We drill niches into them with a Forstner cutter for connectors and grind cylindrical connecting parts under them.

We drive them into glue into each other, collecting the support frame.

The same design, but from a different angle.

We turn to the manufacture of the hinge part. This required bolts, washers and ball bearings. Using a Forstner cutter of a suitable diameter, the bearings are recessed into the workpiece

It was necessary to make a secret connection. So that there are no through holes. To do this, I drilled a hole, hammered an M12 nut and screwed a washer on top so that the nut would not fall out

Preparing the bases for the sides of the hinge module. To do this, we drill blind holes in the rails at an equal distance.

Then they are assembled on glue into solid blocks.

Now we bolt them to the previously assembled base.

Another angle.

We assemble and mount the seat on the base. (Rectangular frame with transverse slats). The bolts are recessed into blind holes into which the cylindrical arms of the armrests will then go.
We attach the back assembled in a similar way to it.

The armrests are assembled according to the principle similar to the sidewalls of the hinge part.

We put the armrests.

They are fixed with furniture bolts to the backrest, giving additional rigidity.

Foam cushions are cut to fit the seat and back. After that, covers were ordered for these pillows.

The chair was then disassembled and painted. For this we used aquatex, walnut color. In two layers.

Once again I will cite the rolling unit after painting.

And, finally, the final of the whole work, which took several months after work.

A pleasant vacation depends not only on the company, but also on the environment with which it is created. One of the popular pieces of furniture for relaxation is the pendulum rocking chair. This furniture is very common as it is different original design and practicality. Today on the market you can buy models for almost every taste, picking them up for a specific design.

Basic concepts

Rocking chairs are special designs that can change their position. They swing along one line. There are several types of such mechanisms, among which pendulum systems (gliders) have gained particular popularity. A feature of such a rocking chair is that it moves with the help of a special mechanism. It is based on several bearings that allow the seat to swing. At the same time, the base of the chair remains stationary, which is very convenient in small rooms... The swing angle depends on the length of the pendants that form the product frame.

System advantages

Pendulum rocking chairs appeared a long time ago, but they have become popular only now. They have several significant advantages over other types of structures:

1. Safety... This characteristic is one of the most important. The design of the pendulum mechanism prevents the product from overturning during movement. This way you can protect not only yourself, but also those around you.
2. Practicality. The base of the chair does not move, which prevents the runners from damaging the floor covering.
3. Silence. The mechanisms of the pendulum do not emit practically any sounds during movement, which allows them to be operated even in the bedroom.
4. Ergonomic The structure can be made from various materials that adapt perfectly to different interiors... It should be noted that the rocking chair can be used in the same way as a full-fledged chair.

Rocking chair pendulum type very often used by moms. Such furniture allows you to rock the child faster, while spending a minimum of effort. Today there is a whole line of rocking chairs for mothers. Such products are distinguished by a unique backrest shape and comfort. This allows you to reduce the stress on the body while holding the baby in your arms.

Materials (edit)

Gliders are fairly simple designs that you can make yourself. Before manufacturing, you should familiarize yourself with possible options execution:

1. Wooden armchairs. They are made from boards and bars, they are connected with special fasteners.
2. Metal constructions. Gliders of this type are quite common, as they are durable and original. The metal is very ductile, which allows you to create unique frames that fit different styles interior.
3. Wicker chairs. Vines or artificial rattan are used here as the main material. It should be noted that the pendulum mechanism itself is made from more durable material(wood or metal). Chairs of this type are very beautiful and durable.

It should be noted that all the materials described can be combined with each other. This allows you to get beautiful and durable designs.

You can make a rocking chair using ready-made drawings that are easy to find on the Internet. Sometimes you should use schemas metal structures. For a pendulum structure, you will need the following:

1. Boards size 51 × 152 mm and 51 × 102 mm. For such purposes, you can use solid pine.
2. Hinges - 4 things.
3. Special screws for pocket holes.
4. Paints and varnishes. This includes everything from primer to protective varnish.
5. Glue.
6. Tools. To work with wood, you will need a circular, a drill with a set of drills, sandpaper, Sander and much more.

Algorithm

The process of creating a rocking chair consists of the following sequential operations:

1. The pendulum is assembled first. It consists of two main parts, which are connected by hinges. It is formed from wooden blocks that need to be cut according to a selected drawing. For connection, use grooves and glue. Full assembly should be started only after the surfaces to be glued are dry.
2. The next step is seat making. The shape of the back can be different, but many argue that it is better to choose the classics. First of all, a frame is created, which should repeat the shape of the back. They make it from bars, which are interconnected by several transverse supports.

Rocking chairs are very popular products that provide a comfortable leisure time. They are presented in a huge number of types, which include a glider chair, which has certain differences from a standard rocking chair, while being distinguished by high comfort and attractiveness. The glider design assumes the use of a special pendulum mechanism, due to which a quiet, pleasant swing is provided. The product is very convenient to use, and it is also multifunctional. It has armrests with pockets for a remote control or other small items... Some models are equipped with a leg strip.

The product appeared on the market relatively recently. It has a pendulum mechanism that makes it possible to enjoy a measured, pleasant swing. Additionally, there is a separate bench, which also contains a built-in pendulum, so after hard day it is very pleasant to put your feet on it, enjoy a pleasant swing.

Often, glider rocking chairs are purchased by nursing mothers, since the products help to quickly and comfortably rock babies.

The main parameters of such a product include:

• the angle of the backrest can be easily changed, which allows you to adjust the product for a specific user, after which the selected position is securely fixed;
• some models are called a recliner, and they are equipped with a special traveling footboard;
• governed by different types armchairs different ways since mechanical or electrical mechanisms are used for this, as well as a sensor;
• the recliner acts by pressing the backrest, raising a special lever or using the buttons located on the control panel;
• some innovative models can even be fixed in a huge number of positions, and certain chairs memorize the most frequently chosen pose;
• the footrest is usually presented in the form of a pouf, and it can go out from under the bottom of the structure or act as an extension of the chair;
• some products are equipped with additional functions massage or aromatherapy, seat heating or other elements that increase the comfort of relaxation.

Each glider model has its own characteristics, so it is important to focus on own desires and preferences. The more functions and additional opportunities available in a chair, the higher the price.

Advantages and disadvantages

Glider chairs have pros and cons, which are recommended to be studied well before purchasing them directly.

Advantages	Flaws
The convenience of use	High price
Safety for people or pets	The chair takes up a lot of space, so it is important to select the optimal area for it in a certain room
Due to the use of a high-quality pendulum system, possible damage to the floor covering is minimized	Elements with a mechanical transformation mechanism are not very convenient to use
The mechanism works silently	If you purchase a product made of fabric, it is difficult to clean it from dirt.
Glider and recliner fit perfectly into different interiors and styles	-
Modern models are equipped with numerous additional functions, elements for their more comfortable use.	-
Light and pleasant swaying provides complete relaxation of the body	-
There is no need to carry out periodic maintenance	-
Great for feeding babies

There are positive parameters great amount therefore a recliner or glider is the right choice for any person. If desired, they can be installed even in the office, providing a comfortable and efficient working environment.

Manufacturing materials

These products are formed from various materials. The frame is usually steel or aluminum, therefore it is highly durable and reliable. Wood is often used for this. Special attention it is worth paying attention to the choice of the upholstery of the product. Upholstery is most often represented by the following materials:

• genuine leather is the most durable option upholstery. The only drawback is the high cost of such products;
• chenille is a material very similar to velor. Very durable, however, it is afraid of moisture and snags;
• velor is a soft, durable fabric that can dry out over time;
• tapestry - natural material with anti-allergenic properties. Prone to abrasion;
• jacquard is an inexpensive, durable fabric that is resistant to abrasion;
• matting is an ideal material for eco-style furniture;
• flock is a wear-resistant type of fabric;
• artificial leather - durable, non-deformable fabric, which is also durable, hypoallergenic and not afraid of exposure to direct rays;
• eco leather - practical material, characterized by a variety of colors and textures.

Leather
Velours
Chenille
Tapestry
Jacquard
Matting
Flock

Transformation mechanisms

The mechanism can be mechanical, sensory, or electrical. There are also several of the most popular models of chairs, which differ not only in the materials used, but also in the parameters. These include:

• standard glider model with a footboard, in which the bench moves out in different ways;
• folding bed, in which the footboard is a direct continuation of the seat;
• recliner equipped with built-in support;
• massage chairs.

Each model has its own characteristics, and is also available in numerous colors and sizes.

With footrest
Massage
Foldable

Product selection rules

Choosing a quality glider is easy, since most models are different high quality... It is only important to know in advance what exactly the structure is being purchased for, as well as who will be a regular user. Factors the right choice are:

• the cost of the product, which depends on the available mechanism, upholstery material and other parameters;
• material of manufacture is important parameter because it is important that all components are made exclusively from safe, hypoallergenic components;
• the reputation and reliability of the manufacturer is a prerequisite;
• it is important that the chair is wide enough to comfortably sit in it;
• it is advisable to choose a high back so that you can completely lean on it, as a result of which it will repeat the bends of the back;
• models in which the backrest tilt is adjusted are considered an excellent choice;
• swing, transformation should be carried out silently and smoothly;
• before buying, quality certificates and other documents from the manufacturer are certainly examined.

Thus, glider chairs are modern varieties standard rocking chairs, which are distinguished by high comfort, attractiveness, and the presence of numerous pleasant functions. It is important to correctly choose a product that is suitable for the user, as well as created from high quality, durable materials.

Video

An overview of one of the variants of the glider chair.

Photo of glider armchairs

A selection of photographs with views of the glider chair.

As soon as a rocking chair appears in the house, it immediately becomes a favorite piece of furniture for all family members. For the opportunity to sway soothingly on it, forgetting about anxiety, fuss, the chair is ready to forgive a slight creak and even a slight damage to the floor covering. The pendulum mechanism is able to eliminate all disadvantages without changing the effect of uniform swing. This mechanism is called "glider". It is a great alternative to the classic rocking chair.

Young mothers especially fell in love with the glider chair - on it you can comfortably feed and lull your baby. Not a single extra sound will interfere with the deep, serene sleep of the baby. Please your family, make a gift for women - make a chair with a pendulum mechanism with your own hands.

Pendulum armchair

The pendulum mechanism is used not only in armchairs, but also in the production of baby cots. The cradle, the seat are suspended on rigid wooden or metal hinges from a fixed, stable base. Movement, as in traditional rocking chairs, is possible only back and forth. Bearings are often used to connect the base and seat to keep the swing easy, smooth.

Experienced craftsmen it is advised to install hinge mounts in such a way that, when stationary, the shape of their arrangement resembles a trapezoid with the larger side up. This feature of the mount allows not to exceed the amplitude of movement during swinging and, accordingly, makes the product more stable, which means it is safe. Use our tips and your experience to make a pendulum chair for your home.

Materials and tools

Inexpensive wood such as pine can be used as the base material. Good choice thick (at least 20 mm) plywood will also become.

• Boards with a section of 2x6 ″ (51x152 mm) and 2x4 ″ (51x102 mm).
• 4 metal hinges.
• Screws, screws for pocket holes.
• Primer.
• Glue.
• Emery cloth, application grinder will speed up the processing process.
• Drill.
• Drill.
• A circular saw.
• Band-saw.
• Pocket hole preparation device.
• Electronic digital protractor.
• Household milling device.
• Clamps.
• French ruler-pattern.
• Roulette.
• Pencil.

Work description

The details of the support part of the chair (base - B) are made from boards with a section of 2x6 "(51x152 mm), all the rest - from slats of 2x4" (51x102 mm). The dimensions of the base parts are shown in the photo below:

1. Cut out circular saw slats of the desired length.
2. To make all the inner and outer roundings on the parts the same, use a French ruler as a stencil, marking the places of contact with the workpiece with tape. You can use other tools at hand, such as a round jar of varnish or primer.
3. Cut off excess with band saw.
4. The upper parts of the base consist of three parts, which are attached to each other and from bottom thorns. To cut thorns (1 "- 2.5 cm long), make cuts about 5 mm deep, then use a clamp to fix the part vertically and cut off any excess with a saw.
5. Prepare cleats in the same way on 3 pieces of 17.5 inches (44.5 cm) long. With the help of these blanks, we will fasten the right and left sides of the base.
6. Use a router with a 0.75 "drill bit to make blind groove holes in the base parts. The holes should be 0.75 "(1.9 cm) wide and 1" (2.5 cm) deep.
7. Apply glue to the surfaces to be joined, as well as in the grooves, firmly fasten the parts of the upper part of the base. Secure the joints with clamps until the adhesive is completely dry.

If excess glue appears on the seams of the joints, remove them immediately with a damp cloth or sponge. Then, when finishing, you will not have problems with uneven coating of the product with varnish or stain.

1. Use a drill to drill 0.25 in. (0.6 cm) holes on both sides of the top of the base.

When using the drill, make sure that the drill goes in at a 90 degree angle. The correct operation of the hinges will depend on the accuracy of the work performed.

1. Attach the top pieces of the base to the bottom pieces. Use a pencil to mark where the grooves will be prepared for joining the upper and lower parts.
2. Cut the grooves in the same way as you did earlier in the upper parts of the base.
3. Glue the details together. To firmly squeeze the uneven edge of the structure with clamps, temporarily attach the cut pieces of wood.
4. Round off the corners on the resulting parts, carefully sand the surface. Smooth corners into hard-to-reach places you can use simple adaptation- wind a small piece sandpaper on the dowel.
5. Start assembling the two parts that will form the base. Apply glue to the surfaces to be joined, make the connections. Secure the structure with several clamps.

The base is ready, now it's time to start creating the seat and backrest. For manufacturing we will use 2x6 ″ boards.

1. We use the lines of the French ruler to get a comfortable shape for the seat. If this form is not comfortable for you, add required changes... We use the resulting part as a template for another of the same (2 side seat supports). You can take the measurements of the details shown in the photo below.
2. On each seat piece, step back 1.25 ″ (3.2 cm) from the thinner edge and make a groove at 106 degrees. An electronic digital goniometer will help with this.
3. Via miter saw cut grooves in the backrest base pieces 3/4 "(7mm) deep.
4. Use a drill to prepare 4 holes at the bottom of the seat pieces for mounting the chair. They should be in the shape of a quadrangle at an angle of 113 degrees. Countersink the holes.
5. Prepare holes in the center of the backrest for screw fastening when aligning the parts in the grooves.
6. Proceed to prepare the 23 "(58.4 cm) slats for the backrest (15 pieces) and seat (14 pieces). It is desirable to make parts different widths to range them from 1 "(2.5 cm) thinner to 2" (5 cm) thick.
7. You do not need to process one side of each part - it will be the back of the seat and back. On the front side round off all corners and ends of each plank, grind the surface.
8. At both ends of the planks, measure and mark the locations of the screw holes for fixing to the bases. Drill the holes, countersink them at the top.
9. Assemble the sides of the seat together using eight (4 per joint) 1.4 "(36 mm) deck screws.
10. Check the planks to ensure that they are the same length after processing. Begin installing the slats by screwing the widest slats to the lower back.

To make the distance between the planks the same, use a plank with a thickness of about 3 mm as a stencil.

1. Now cut out 4 blanks of the chair legs, as shown in the figure. Each piece should be 23.5 inches (59.7 cm) long and beveled 10 degrees off the parallel ends. 25. Sand the edges of the parts.
2. Place the legs against the seat of the chair so that they are centered. The legs should fit snugly, so use a pencil to mark the slats to trim.
3. Attach your legs to the seat with 4 screws and glue. The front leg should be positioned so that the distance from the bottom edge to the base of the seat is 9.8 inches (24.9 cm).
4. To install the rear legs, remove the 3 screws that match the mounting location. Then install again with screws and glue.
5. Cut out the blanks for the armrests from a 1x6 "(2.5x15.2 cm) board. The shape of these parts can be arbitrary, but at the end, the place of contact with the back, you need to make a cutout. Do not forget to make the edges of the armrests rounded, sand the surface.
6. To attach the armrests with the Pocket Hole Tool, punch 2 holes at the top of the legs.
7. Install the armrests.
8. Using a special cutter, prepare the plugs from the remaining pieces of wood or plywood to close the grooves in the joints with screws. If you intend to use the chair outdoors, this will protect metal mounts from moisture and damage.
9. Place the plugs on the glue in the holes. Remove protruding parts.

Finishing should be done when the chair mechanism is not yet assembled. This will keep the metal parts in working order.

1. If necessary, sand the surface of all parts of the chair additionally.
2. Cover the wood with a primer. To increase the weather resistance of the material, apply 2 coats alternately.
3. After drying, cover the chair with varnish.
4. Attach the brackets with large screws and nuts on one end to the top of the base and the other to the bottom of the legs. Do this offset so that the line drawn through the 4 attachment points forms a trapezoid with a large base at the top, as shown in the photo.

Most people associate a rocking chair with rest and relaxation. Imagination paints a veranda country house, a warm blanket and a glass of wine. Is it possible to make this piece of furniture, a synonym for measured life, with your own hands? After reading this article, even a novice master can easily cope with this task.

• glider;
• classic on runners.

Each of the types has a number of features, so we will consider them in more detail.

Glider (with pendulum mechanism)

This type of furniture has a fixed base, and swinging occurs using a pendulum mechanism. It has a number of advantages over the classic one, but the main advantage is quiet operation. That is why it is often purchased by mothers for feeding and rocking babies.

Classic on skids

This type of rocking chair is known to everyone, but not everyone knows what a wide variety of subspecies of this piece of furniture exists.

1. On simple runners of constant curvature (radius).

   Radius skids - the simplest and most common support option

   However, it is worth knowing that this is not the safest design option. Professionals make to order, as a rule, rockers on runners not of constant, but of variable curvature, which are calculated taking into account the height and weight of users. It is these models that have the lowest risk of overturning.

2. On elliptical runners with tilt stops.
3. On springs.
4. Roly-vstanka.

What materials can you make a rocking chair - table

Material	Description, features	Advantages	Flaws
Willow vine	Very durable openwork products are obtained from the vine, but this work is very time consuming and requires certain skills. suspended structures are often made of this material.	beautiful appearance; long service life; ease.	afraid of moisture
Rattan	Rattan products have their own ethnic flavor. Weaving from it yourself is a difficult task, since it is not easy to get material in our latitudes.	very light and beautiful; only braided and glued joints are used in the manufacture.	high price; rather fragile material.
Wood mass	The most common material for making strong and durable rockers is wood. Are used different breeds trees, but the most common are conifers, especially durable species (alder, oak, larch).	relatively low price; the ability to do it yourself.	carpentry skills are required for manufacturing; durable woods are expensive.
Metal	Since metal has a large mass, only the frame is usually made from it, and the seats are made from another material - plastic, fabric, leather, wood. Fully metal forged products look impressive, but they are quite complex in execution. For this you need to have special tool as well as metalworking skills.	durability	heavy construction weight
Plastic	To make a folding rocking chair yourself, you need special equipment.	low price; variety of designs.	low strength of the product.

Rockers made of plastic, metal, rattan, willow vine and solid wood - photo gallery

Armchairs for home and garden

It is better to use products from environmentally friendly clean materials, not too heavy, so as not to spoil the flooring. Size also matters if your apartment isn't too big. Most suitable option- plastic and wood products. Wicker furniture also suitable, but not always appropriate in an urban interior.

If you plan to use furniture outdoors, then you need to take into account some points: how resistant the material is to moisture, exposure to the sun, whether it is easy to wash it easily. With a certain preparation, a product made of almost any material can be used on the street - forged, plastic, wooden models... Designs with an awning from the sun are relevant on hot days.

You can also make original rocking chairs from chairs that have long been going to be repaired.

Photo gallery: options for wooden garden chairs

DIY rocking chairs

Crafting this piece of furniture is not entirely simple task, but it is within the power of even those who have never done anything like this before. There are many schemes, options and manufacturing methods. Let's consider the most interesting and simple ones.

The simplest chair from an ordinary highchair

The best option is to use an ordinary wooden chair... For manufacturing you will need the following materials and tools:

• a chair with a back and armrests;
• high-quality plywood 15 mm thick;
• wood varnish;
• jigsaw;
• milling cutter;
• Sander;
• dowels.

Stages of work:

1. We cut out radial runners from plywood with a jigsaw according to the scheme.
2. We grind them with a machine or sandpaper on a rail.
3. From the bottom on the legs of the chair we make cuts and select the grooves for the runners.
4. We insert the runners into the grooves of the chair legs, fix them with glue and dowels.
5. We cover the surface of the rocking chair with varnish.

Video: making a highchair

Vanka-vstanka: step-by-step instructions, photos, drawings

Such a rocking chair with your own hands from plywood will also be easy to make, knowing the drawing. There are many options on the net, we will give one that is devoid of the risk of overturning.

Materials and tools for assembly:

• plywood sheets measuring 1520x800 mm, 15 mm thick (for sidewalls, posts and supports), 10 mm thick (for backrest and seat slats);
• jigsaw;
• glue;
• screws.

Chair assembly steps:

1. We are preparing a drawing of the future product.
2. We transfer the drawing to plywood sheets.
3. We cut out the necessary elements using a jigsaw.
4. We drill holes for screws.
5. We sand, prime and paint all the elements.
6. Putting the frame together.
7. We form a seat and a back from the slats, glue the elements.
8. We fix all the elements with self-tapping screws.

Video: simple plywood rocking chair

Is it possible to assemble a pendulum mechanism for a sliding chair on your own

The pendulum structure moves upper part chair relative to its base. To do it yourself you need detailed diagram... This is not an easy job. But the principle of the mechanism is always the same. For simplest design you will need:

• 4 bars of the same length and two - larger (sizes are chosen depending on the design scheme);
• 8 bearings nut and washer.

Instructions:

1. Assemble the blocks and drill one hole at each end for the bearings.
2. Make an end beam (it holds the weight of the entire sliding structure):
   
3. Attach each end part to two bars. This will be a simple pendulum mechanism. Then it is connected to the base of the chair and the seat. Example finished structure below.

A rocking chair made of plastic (polypropylene) pipes: diagram and operating procedure

The chair can also be made from profiled metal or simple water pipes... For work you will need:

• plastic pipes with a diameter of 25 mm (for sidewalls) and 20 mm (for transverse elements);
• drill and pipe welding machine;
• reinforcement with a section of 15 mm (inserted into the pipes to enhance the stability of the chair);
• fittings for corner joints(2 pieces - for 90 ° and 6 pieces - for 45 °);
• plugs for pipes;
• pencil, ruler.

Instructions:

To make the chair comfortable, you need to fix a 50 mm thick foam mattress on the frame. To do this, you need a case with ties, which is easy to sew on your own (on a typewriter or even by hand).

To give plastic pipe round shape can be done with hot sand. To do this, the sand is heated in an oven to 95–130 ° C, a plug is inserted into one end of the part, the tube is filled with sand, given the required shape and waited for cooling.

Desire and basic skills in working with a tool are all you need to independently build a comfortable and beautiful rocking chair for your home or summer cottage. The described instructions will help you do this correctly and quickly.