Do-it-yourself shower cabin from improvised materials. Do-it-yourself summer shower - step-by-step instructions for building a shower room, from simple to complex

The construction of a summer shower for a summer residence is not complete without questions related to the choice of material and the determination of the size of the structure. In addition, I want the building to be heated. This will make it possible to swim on cold days when the water in the tank does not have time to warm up from the sun. An important issue is the organization of drainage and discharge of dirty water. Today we will look at how to build a summer shower with our own hands, and we will try to address all the questions of interest.

A country shower is so simple that it does not require a detailed diagram. Usually withstand the standard dimensions of the booth 1000x1000x2200 mm. It is impossible to build a booth below, since part of the height will be taken by a wooden pallet, plus a watering can above your head. But the width and depth of the structure, it is desirable to individually select the physique of the owners. For example, an obese person in a small booth will be cramped, so the dimensions will have to be increased.

Drawing of a simple summer shower for a summer residence

If you decide to cultivate the building, build a dressing room with a dressing room, install benches and a table in it, drawings will already be needed here. Draw what you want to build, specify all dimensions. When drawing up a detailed diagram, consider the following points:

Wooden shower cubicle

Building a cabin out of wood is the most common option due to its ease of construction. Wood is an environmentally friendly material, easy to process. Its only drawback is susceptibility to moisture and bugs, so it requires additional processing. To build a wooden shower for a summer residence, you will need boards and timber, preferably from coniferous trees. You can, of course, use oak or larch. The material made from these types of wood is more durable, but it is more difficult to process. Having decided on the material, get to work:

1. Since we are building a wooden shower, we will make the frame from wood. The main load on the racks will create a tank of water. If its volume is about 200 liters, then the main racks must be installed from a bar with a section of 100x100 mm. To fix the door, install additional racks made of timber with a section of 50x50 mm. The distance between them is equal to the width of the doors themselves with the door frame.
2. Under all vertical racks, dig holes 80 mm deep. Fill the bottom of the pits with a 100 mm layer of crushed stone and sand.
3. To make the tree rot less in the ground, grease the edges of the timber with bitumen or machine oil. Top wrap with two layers of roofing material. Insert the posts into the pits, level them with a plumb line and concrete.
   
4. Another method to extend the life of the posts is to cast metal bushings. They can be made from pieces of a metal pipe with a diameter of 100 mm. When the concrete hardens, chop off the edges of the square beam with an ax to the size of the inner diameter of the pipes and install them in the concrete bushings. Under the door pillars, similarly concrete bushings from a pipe of a smaller diameter.
5. When installing vertical racks, make the front ones from the side of the doors 100 mm higher than the rear ones. The difference in height will help build a pitched roof.
6. Connect the exposed racks around the perimeter from below and from above with horizontal jumpers, securing them with bolts. If you plan to make the floor in the form of a wooden lattice, reinforce the lower lintels with metal mounting corners. The jumpers will be supports for the logs and must support the weight of a person.
7. Now you need to make a frame for the tank from wooden jumpers fixed on top of the frame. A tank filled with water made of any material has an impressive weight, so the frame under it must be made strong.

   

   Flat water tank for water installed on the roof of the shower

8. Sheathe the sides of the cabin frame with a sanded board. Make a door from a board 20-25 mm thick. Cut it to the required length, lay it in a row and sew it with cross bars. Knock down the door frame from a board 40-50 mm thick and fix the door to it with hinges. Now the whole structure can be bolted to the door pillars.
9. Treat the finished booth with an antiseptic and cover with drying oil or varnish. Cover the door from the inside with a film so that water does not get on it.

Variants of wooden cabins for a summer shower

Polycarbonate cabin

It is easier to build a polycarbonate booth than a wooden one, but you will need welding experience. The fact is that for polycarbonate it is necessary to weld a frame from a metal profile. For racks, a profile with a section of 40x60 mm will go, and a smaller section can be used for strapping. The use of a wooden frame for polycarbonate is not desirable, since both materials tend to "play" from changes in weather conditions. From this, polycarbonate sheets can be deformed.

The manufacturing process of a metal frame for polycarbonate is similar to a wooden structure. Concrete the main racks, and then weld the upper and lower jumpers. Three jumpers must be made in the middle of the frame so that the polycarbonate sheets do not sag. The fourth is not needed. She will interfere with the doors. From above, weld the frame under the tank. Make a frame for the door from a profile with a section of 20x20 mm and fix it with hinges to the rack. Paint the entire structure with waterproof paint.

For sheathing, use opaque polycarbonate honeycomb sheets, 6-10 mm thick. Cut a large sheet into fragments according to the size of the booth with a circular saw. Fix the resulting polycarbonate plates to the frame with self-tapping screws with a thermal washer. The door is also sheathed with a sheet of polycarbonate. Bolt the handle and latch to the frame.

Polycarbonate shower option with dressing room

Shower tank

Cabin made of corrugated board

A good option for giving would be to build a cabin from corrugated board. Lightweight, strong and durable material will last for years. For a metal profile, both a metal and a wooden frame are suitable, but always with additional transverse bars. Sheets of corrugated board are soft, and additional emphasis will not interfere with them. We build any of the frames for the metal profile in the same way as the above options. In any case, weld the door frame from a metal profile.

Fastening the corrugated board is done with galvanized self-tapping screws with a sealing washer through one wave. First fix the sheets of corrugated board on the side walls, then sheathe the door. If you need to cut the material, use scissors or a special disc with teeth on the grinder so as not to burn the polymer coating of the corrugated board when cutting.

Cabin made of bricks

The construction of a brick cabin in the country requires the construction of a foundation. To do this, it is enough to dig a trench 200 mm wide and 400 mm deep along the perimeter of the future structure. Fill the trench with a brick battle and fill it with liquid concrete so that it seeps between it. A week after the concrete has set, start laying bricks on the cement mortar. Don't forget to install a box for the door. The door itself can be made of wood or a frame can be welded from a profile and sewn up with a sheet of corrugated board. On the last masonry, wall in wooden blocks across the building, preferably the thickness of the brick. They will lay the roof and fix the tank.

Installing the roof and tank

The material for the roof will need to be hard. Slate or corrugated board is well suited. After fixing the roofing material, drill a hole in the center of the roof. Place the tank on top so that the water supply tube passes through the hole. Screw the tap and watering can onto the tube.

The optimal tank capacity for a country shower is 200 liters. In the store you can buy a plastic or galvanized tank or make it yourself by welding from stainless steel. Any container with a neck for pouring water will serve as a tank. To make a shower for a cottage with heated water, mount a heating element with a power of 2 kW in a metal tank. Paint the top with black paint. The dark color attracts the sun's rays, and the water will heat up faster.

Scheme of the device of the tank for a summer shower with heating

If you install wood-burning titanium in a cabin in the country house, then in addition to hot water, you will get a heated room. Then you will need to install a second tank with cold water next to it.

Arrangement of the floor and drainage

The floor and drainage of the shower for giving can be done in two ways:

Summer shower in a country house

If there is free space, a country shower can be built in the house. To do this, it is better to purchase a shower stall in the store. Make a recess in the concrete floor and install the acrylic tray according to the product instructions. Connect the siphon on the pallet with a corrugated hose to the sewer. Seal the joints of the pallet to the floor with sealant. Further, according to the instructions, assemble the frame from the profile, install the doors, supply cold and hot water from the boiler.

As you can see, you can build a summer shower with your own hands in the country from almost any material. The main thing is to prepare drawings, material, tools and show aspiration.

In contact with

Whether you worked on a suburban area or had a rest - this is not so important, in any case, you will certainly want to take water procedures at the end of a long summer day. In order to have such an opportunity, it is necessary to build a shower in the country with your own hands.

General steps

No matter what type of country shower you choose to build, some steps will need to be followed in any case:

Location selection

The choice of the optimal site for development is accompanied by the following rules:

• No shadow. The sun's rays are a natural and free source, and if it is not equipped with a forced temperature increase system, then the only one at all. Therefore, try to provide them with sufficient access to the structure by choosing an open area for the shower.

• The presence of a drain or sewer pit. Used water must drain somewhere, and it is better to take care of this in advance than to wait until it finds its own way to flower beds, a cellar or another place undesirable for moisture accumulation.
• Compliance with the overall design. You should not place a shower room in front of the facade of the house, if it has already been erected, or in other equally significant places where it will violate the overall interior. This is especially true for temporary buildings that do not differ in particular aesthetics.

Design

Ready-made drawings-the dimensions of the shower in the country with their own hands can be easily found on the Internet. You can also create your own unique project yourself.

The main thing is that the do-it-yourself drawings of the shower in the country should be provided with all the necessary dimensions and a list of materials used.

Option number 1: film construction

If your suburban area is rarely visited, then it makes no sense to build a capital building, and an elementary film construction, which has a number of advantages, is quite suitable for receiving water procedures:

pros

1. Minimum selling price. You do not need a large amount of expensive materials.
2. Ease of erection. You can easily and quickly cope on your own.
3. Possibility of dismantling.

There are two positive points here:

• If necessary, such a shower can be moved to a new more suitable place.
• For the winter, the structure is dismantled and hidden in a warm, dry room, where it will not be threatened by either aggressive weather conditions or the danger of being stolen.

Minuses

The negatives here are no less obvious than the positives:

1. Inconspicuous appearance. Racks covered with a film do not represent a special aesthetic value.

1. Low level of comfort. The simplicity of the design does not allow the implementation of many useful functions inherent in capital showers.
2. fragility. If you do not hide the film shower for the winter, then in the spring you will most likely have to build a new one.

Mounting

So, if you, having weighed all the pros and cons, decided on this economical option, then you will need step-by-step instructions for a shower for giving your own hands:

1. At the selected place, remove the top layer of turf and level the area. From it we dig a small sewer trench to the drainage system.
2. We take four metal corners 2.5 m long and eight 90 cm each. As an alternative, you can use wooden bars, but their dismantling will be more difficult.
3. We drill holes along the edges and connect them with bolts into a quadrangular frame.

1. We wrap it with a film, leaving one side partially loose, so that you can move it aside to get inside.
2. We put an ordinary wooden grate on the floor as a pallet.
3. We install a suitable water tank equipped with a watering can on the roof.

Tip: It is convenient to use a portable shower bag to maintain a temporary building. It is easy to operate, does not require a reinforced base, is easy to clean and most often has its own heating system.

Option number 2: frame construction

This type of shower is a kind of intermediate option between the film construction and the capital brick structure. Such a building is perfectly protected from wind and precipitation, is able to spend the winter in the open without losing its stability, and is equipped with such pleasant little things as shelves for shower accessories and coat hooks. But if you don't take good care of it, it won't last long.

In this case, the progress of work is expanded by some measures.

Foundation pouring

Since the frame structure of the shower for giving assumes its constant presence in one place, it must be equipped with a suitable base in order to avoid further subsidence into the ground:

1. We remove a ten-centimeter layer of earth with an area corresponding to the future structure. It is noteworthy that in this case it is not at all necessary to be limited to dimensions of 90 by 90 cm, you can afford to build a more spacious structure, in which there is even a place for a dressing room.
2. We ram the bottom, and cover the sides with pieces of plywood as formwork.
3. We mix the concrete mortar using the following ingredients and their proportions:

1. In the place where the drain will be located, we put a small log wrapped in roofing material. So we will create a hole through which we will lay later.
2. Fill the prepared place with the mixed mixture.
3. We display the slope of the surface towards the drain.
4. We are waiting for a full grasp.

frame

The assembly of the frame is slightly different from the above option. The only exceptions are large dimensions and the presence of central horizontal bars at a height of about a meter, which are necessary to enhance the mechanical resistance of the entire structure.

Tip: vertical posts can be concreted in the process of laying the foundation. This will increase the reliability of the design.

sheathing

To fill the walls, you can use the following materials:

• Wood treated with antiseptics.
• Wood chipboard.
• Plexiglas.
• Polypropylene panels.
• Iron sheets.
• Slate.

All elements are securely screwed to the "skeleton" of the shower with bolts.

A shed-type roof covered with metal tiles, roofing felt or slate will be quite enough.

Option number 3: capital construction

The capital project of the soul in the country is an independent architectural structure, which must be registered with the appropriate administrative institution without fail. This already suggests the need for such a design.

In addition, in this case, brick is usually used for the construction of walls, which must be able to be laid, a reinforced foundation, which requires additional costs, and a massive roof that can withstand any precipitation for many years. And when you build a residential building with a built-in bathroom, then the need for such a solid building will disappear, which will cancel all the efforts invested in it.

Output

A shower in the country is necessary, but it's up to you to decide what type of structure to build for this purpose. You can get by with a temporary building or create something more durable, it all depends on your future plans for the site.

The video in this article will introduce you to additional materials. The visited dacha must have all the necessary living conditions, including a shower.

In summer, a fairy tale in the country: the air is clean, berries from your garden, salads from only plucked vegetables. Spoil this happy time, can only lack of water. Everyone wants to get under the shower in the country, finishing work in the garden. If some prefer the bath, then others need a shower and nothing more. Therefore, the decision to build a summer country shower with your own hands is logical and expedient. After a small house with no windows, the construction of the soul is at the top of everyone's list. For her, they use the materials found on the site and purchased, the advice of neighbors in the site and their own imagination.

One of the options for creating a shower enclosure in the country is to build an additional structure for the finished barn, it can be painted with cheerful colors. You can also divide an existing building, and with the help of a partition, make a place for a shower.

If there is no such barn that will be comfortable and durable, you can give preference to a frame made of wooden beams. A reliable support will be a beam of 10 cm in cross section. To protect against moisture and insects, we paint the wood or treat it with a wood preservative. We choose the installation site, it should be the sunniest and preferably on a hill, otherwise you will have to make an embankment so that there is a drain.

Do-it-yourself shower plan

• Choose a sunny location
• Pour the foundation
• Make a drain
• Install pallet
• Build a frame
• Install tank

Building a foundation

We mark out a rectangle of 1x1.4 meters, drive in the pegs, pull the rope between them, measure the distance of the sides and diagonals with a tape measure.

If we are planning a stationary and durable shower in the country, then we need to do it. Using a garden drill, we make holes one meter deep in place of the pegs. A metal pipe 1.2 meters long and 90 mm in diameter is placed there. Three parts of sand, one part of cement and five parts of crushed stone are used for pouring. We measure the distance between pipes rising 20 cm.

Formwork will protect the structure from moisture, they must be filled with the same mixture as the foundation. Due to this, the country shower will rise above the site. On the columns that have not yet frozen, you need to insert 3 reinforcement sticks with a small cross section of up to 1 cm and 20 cm in length. We are waiting for the foundation to be solidified.

Making a drain

To equip the drain, we dig a two-meter hole. We strengthen the walls so that the edges do not crumble, an economical way is to lay 6 - 8 unnecessary tires. We make a hole for the drain pipe connected to the pallet in the penultimate one. You can do without a pallet, but the water will corrode the soil, you can buy a ready-made pallet.

Building a frame

We assemble the wooden beams of the frame on a dry foundation. Dressing is done from below and from above. The upper and lower frames are assembled separately on the ground. The structure is bolted and installed on the foundation. For installation, you need to drill holes for the reinforcement on which the bars are mounted. Additional stability is provided by fixing the struts diagonally. You can sheathe it with planed wood, be sure to varnish or paint it. It is desirable to seal the door to avoid drafts.

Tank installation

There are two options, just put the tank on the roof of the building or create a frame of bars above the tank and cover it with polyethylene, which will give the effect of a greenhouse. If the first option will speed up the work, the second will save the time it takes to heat the water and will keep the heat.

Given the instability of weather conditions, it is worth choosing the second option so that the presence of a shower in the country does not depend on the sunshine of the days. To create a structure above the tank, we knock down two blanks, from the bars into the letter V. We select the length of the bars according to the diameter of the barrel. We connect the blanks using a wooden lath. We put the structure along the edges of the roof, fix it using self-tapping screws. Then just wrap it in plastic.

Tank material alternatives are between lightweight plastic and rapidly heated metal. The metal tank can be painted with dark paint, and it will heat up faster, lightweight plastic is convenient to install. We will give preference to dark plastic, a barrel of 200 liters. in volume. It must be laid on the roof, fastened with straps, fixed on both sides with nails.

It is necessary to cut two holes in the barrel, the first one will be for a watering can, it should be sealed with silicone, and it will be filled with water through the second tank. Using a hose, we connect the upper opening of the tank and the faucet with water. You can use a pump to pump water from a well.

Your garden shower is ready to use!

Summer country shower in the greenhouse

Moisture-loving plants can be planted around the shower. Outside the building, fasten hooks for clothes. Creating a summer shower in the country is an easy and enjoyable activity, the result of which will delight you for many summer days.

Those who have a good greenhouse for vegetables in their summer cottage sometimes have a barrel of shower water in it.

Even in the case of windy and cloudy weather, you can close all the windows and doors in the greenhouse to comfortably take a shower in the country.

It is very convenient that the water in the barrel, which is in the sun all day, warms up much faster.

You can easily make and equip a summer shower in the country with your own hands. Photos and dimensions, as well as recommendations for choosing a place for construction, you will find in this article. After all, there is nothing better in the summer heat than to cool off with cool water, especially after active work on the plot. With the onset of hot days, the presence of a shower in the country becomes an urgent and necessary requirement. This factor is especially important if your house is under renovation, and plumbing communications have not yet been completed.

In any case, the interior space of the shower must be spacious so that the bathing person can comfortably accommodate himself and with him all the things necessary for this procedure. The most common parameters of country shower buildings are 2.5 meters high and 190/140-160/100 cm wide. It is necessary to plan the construction of a summer shower in the spring, at its very beginning, so that by the time summer comes it will be ready.

There are no particularly strict criteria regarding the arrangement of such a shower. If you have imagination and the ability to hold construction tools in your hands, you will be able to translate your ideas into reality and build such a thing that is necessary for giving. Depending on the complexity of the plan, it is possible to equip a simple outdoor shower in one day. A more detailed project will take more time, but it will also serve you for more than one year.

Shower for a summer residence, which place to choose for it

So that the water in the tank is not cold, it is more logical to place the shower building in a place illuminated by the sun's rays. If you prefer to take a shower in the afternoon or late afternoon, then you should choose a part of the site where the concentration of solar activity is observed in the afternoon. It is important that this place is protected from winds.

The second important factor is the availability of a drain for used water. A summer shower for a summer residence should be installed on a hill so that the water drains quickly and does not stagnate, attracting insects. The operation of any shower involves the use of large amounts of water, and if a lot of people (a large family) wash in it, then this nuance must be calculated and properly equipped.

If the capacity of your shower tank will be approximately 1-2 m³, then a drain pit will be required. When arranging a place for water flow, its correct placement is important - in no case should it be located under the building itself. A sewer pit or a septic tank with drainage should be located at some distance from the booth, in turn, the slope should go in their direction.

The presence of a waterproof layer for drainage is highly desirable: hydrostekloizol, PVC film, roofing felt or concrete screed are suitable for this purpose. The drainage pit should be at least 3 meters away from the cabin, its depth should be 2.5-3 meters, the bottom is covered with gravel or a thick layer of sand. The top of the pit must be covered and fenced off.

How to make a shower in the country - an example of a simple design

There can be a great variety of options for this useful summer cottage - here the matter already depends on your creative approach. For example, we will consider the features of the "standard" version of the country summer shower.

The shower should be comfortable, so the smallest dimensions of the internal space should be at least 100 × 100 cm. Movement should not be constrained - a person should freely raise his hands and bend over during the washing process. A small place for clothes and towels (cloakroom) should also be allocated, 50-60 cm is enough for it. Thus, in the total footage, the dimensions of the shower will be 160 × 100 cm and 2-3 m in height.

• Install strong and reliable racks - this is your safety, since the tank filled with water for an outdoor shower has a huge weight. For this purpose, a wooden beam 100 × 100 is ideal.
• It is better to dig the racks into the ground, having previously treated them with tar or a fat-containing agent. Fill them with concrete mortar, by the way, it will be best.
• For the container at the top, a horizontal platform should be equipped.
• The cabin is made of any materials, the main thing is that it should hide the swimmer from prying eyes and protect from drafts.
• Containers for a summer shower can be metal or plastic. It is worth considering that the metal tank will heat up faster, but it will also rust. In order for the water to heat up quickly, it is recommended to paint the tank with black paint.
• If you make a frame over the tank and cover it with a plastic film, then the process of heating water will be much faster.
• The valve for the tank can be anything, but a ball valve is most suitable.

The whole process begins with marking the perimeter of the future shower, the racks are installed at the corners and connected from above with a dressing from a similar beam. After that, there is a turn of the lower dressing, keep in mind that it should be located 10-15 cm from ground level.

To fasten all frame fragments, use long bolts - this will have a positive effect on the overall strength of the structure.

However, you can do it easier and install a metal or acrylic tray, while the water will be drained using a hose.

To ensure that the shower door closes tightly, use seals. The shower compartment and the dressing room can be separated by a special curtain, and it would be better if the threshold between these two compartments is somewhat high (to prevent water from flowing into a dry room).

The summer shower, as already mentioned, can be finished with absolutely any material on the outside. Lining, plastic, polycarbonate, moisture-resistant plywood, fiberboard, slate, metal sheets, siding - the main thing is that the building is in harmony with the rest of the buildings on the site.

It does not hurt to pre-open wooden materials with protective compounds.

If the frame is welded from metal, then it must also be coated with anti-corrosion agents or painted with paint.

In order for the water in the tank to heat up many times faster, rafters can be laid on top of the upper trim, and a sheet of roofing iron can be placed on top of them. The metal will reflect the rays of the sun, which will make the process of heating water more active.

Summer shower tank, which one to choose

Separately, it is worth paying attention to water tanks or shower tanks - their choice is determined by the individual requirements and preferences of the developer. They are small and large-capacity, flat and round, iron and plastic. The size of the tank depends on how many people will wash in this shower, often a volume of 100-200 liters is enough for an average family. As mentioned above, it is better to choose a tank of dark color or even black - so the water will heat up faster.

Such a container must have a lid so that various debris and insects do not get inside. At the very bottom of the tank, a tap outlet is mounted, to which a diffuser is screwed.

There is an important point here - the tap should be located on the lowest part of the tank, so that all the water drains from the tank and does not stagnate.

Equipping a summer shower with your own hands, you can purchase a ready-made tank in a specialized department of the building market. On sale there are also containers specifically for such showers, with all the necessary parts included.

If you have a metal or plastic barrel of a suitable size, then after certain manipulations it can turn out to be a perfectly acceptable shower tank. For these purposes, a hatch is cut out on top of the barrel laid on its side to fill the water, and it itself is treated with acrylic enamel (or bath repair agent) from the inside - this applies to metal containers.

And you can not lay the barrel on its side. Everything is within your power if "hands grow from where it is necessary."

Also in this role, tanks from worn-out washing machines “act” well. Despite the fact that their volume is enough for 2 washes, they very quickly adapt to the shower tank, thanks to the presence of inlet and outlet pipes, as well as the necessary technical holes. Such tanks are not afraid of corrosion.

Equipping a summer shower in the country with your own hands, it is better to prepare photos and dimensions, as well as approximate drawings, in advance. So you will see all the working stages clearly and will be able to accurately calculate the final result. With such a work plan in front of your eyes, you will know how much material you will need for the exterior and interior of the booth and drain pit.

Paying attention to the functional part, do not forget about the aesthetic appearance of your summer shower - everything should be not only comfortable, but also pleasing to the eye.

Water treatments in the open air are very useful, so many adherents of relaxation and hardening decide to make a summer shower for a shower in the country with their own hands, or at least install a finished booth on the site. This article will help you understand the design features, choose the right size and installation location, draw up a preliminary diagram and complete all stages of construction without errors.

Types of autonomous toilets. Choosing a place for building a toilet in a summer cottage

If it is planned to build a capital shower for a do-it-yourself brick cottage, it is advisable to use a strip type of foundation. A trench is formed along the perimeter of the future building. The optimal depth is 0.5 m. Next, the formwork is installed. At the bottom of the trench, it is necessary to form a sand-gravel cushion with a thickness of 0.1 m. After that, reinforcement is laid and concrete is poured. This must be done so that in finished form the foundation rises above ground level by about 0.1 m.

When the base is completely hardened and dry, it will be possible to begin the construction of the sewer system.

How to organize a drain system in the shower in the country with your own hands

There are several ways to organize a waste system in a shower stall. The choice of construction technology depends on several factors:

• type of soil on the site;
• type of foundation;
• the number of people living in the house.

If a monolithic slab is used as the foundation for a summer shower in the country house, then before filling it is necessary to lay a system of plastic pipes with an elbow. The plate is formed in such a way that on all sides there is a slope towards the drain hole. The sewer pipe is brought out of the shower room and connected to the general sewage system. You can bring the drainage to the drainage well.

Useful advice! For the construction of a similar sewer for a booth installed on a different type of foundation, it is not necessary to fill the floors with concrete. It is enough to buy a summer shower for giving with a pallet made of acrylic. This element will serve as the floor.

With connection to the sewer system - the best option for a large family, since the pit will not be able to accommodate the amount of waste that will be generated during operation. If the design is designed for 1-2 people, it will be enough to drain directly under the booth. But this type of system is suitable for areas with a loose type of soil, when the shower is installed on a columnar or pile foundation. This option can also be used on a tape base.

First you need to remove a layer of soil with a depth of 0.5 m. The formed depression is filled with gravel or stone to half its height. The rest is covered with crushed stone with a fine fraction. After the cabin structure is assembled, a pallet made in the form of a wooden lattice is installed on a layer of rubble. The system is designed in such a way that wastewater passes through the drainage layers and gradually soaks into the soil.

Sometimes the owners of summer cottages bring the sewer into the garden, which cannot be called a good solution. If you still resort to a similar method, it is desirable that the place where the water drains is well warmed by the sun. Otherwise, the liquid will accumulate, and a swamp full of mosquitoes will form around the shower.

Making a cabin for a summer shower: photo and construction technology

For the construction of a cabin for a homemade shower, any available materials can be used.

Suitable for these purposes:

• wood;
• polycarbonate;
• corrugated board;
• brick.

Each type of material has its own advantages, features and properties.

How to build a shower in the country with your own hands: economy cabin

There is a little trick that will help you achieve savings in the process of building a shower house. To reduce costs, it is enough to use one of the blank walls of the building as a side for a booth.

Before you build a budget-type summer shower, you need to fix a small water tank equipped with a watering can on the wall. Here you can also install elements related to comfort, for example, hooks for clothes, shelves, etc. At the top of the future structure is a partition. It is fixed on the wall of the building. A tarpaulin or film (necessarily opaque) can be used as an entrance door. The curtain is suspended with rings.

The floor is arranged so that the drains are diverted as far as possible from the foundation part of the house. To do this, a platform is concreted or you can get by with installing a pallet made of acrylic.

Useful advice! If you use the inner corner of the building, which has an L-shape, you can generally avoid the construction of the sides of the booth. Their function will be performed by the walls of the building.

Building a wooden cabin for a country shower with your own hands

The most common version of a country shower is a cabin made in the form of a wooden house. This type of building is considered one of the most affordable. Wood is easy to process. At the same time, it perfectly retains heat, which is a definite advantage if the shower is to be used in cold weather.

For the construction of a summer shower in a private house with your own hands, it is advisable to use a wooden beam. For the manufacture of corner posts of the booth, a material with a section size of 10x10 cm is required. A tank for 200 liters of water is installed in the upper part of the shower, so the beam must be thick enough to withstand such a weight load.

To hang the door, you will need to install two additional racks in front of the booth. These elements are placed between the corner posts. For their manufacture, you can take a bar with a section size of 5x5 cm.

In order to form a slight pitch angle for the cab roof shed, it is recommended to install the front corner posts 0.2 m higher than the rear ones. This is not required if a square-shaped tank is used as a container. In this case, the racks are mounted on the same level.

All supports are attached to the wooden frame of the lower trim. For fixing it is necessary to use hardware and metal corners. At the top of the structure, strapping is done in a similar way. You can use spacers to secure the racks more firmly. On the upper trim of the frame part of the booth, a basis for mounting the container is formed. In this case, you need to read not only the size, but also the shape of the tank.

For sheathing the frame part of the building, you can use a board 2 cm thick. This material is also suitable for making a door. It is necessary to lay the boards in one row and knock them together with the help of two jumpers. To prevent the door from skewing, the structure can be strengthened obliquely using a long rail. The door frame for a country summer shower is made of boards, the thickness of which is 4 cm. It is recommended to use self-tapping screws as fasteners.

When the booth is completely ready, it can be opened with a colored varnish composition. From the inside, the entrance is curtained with a film, otherwise the doors will swell from moisture.

Useful advice! Often, a large barrel for a shower in the country is used for construction. By installing a watering can over the structure, you can get a budget version of a wooden booth.

Polycarbonate garden shower technology

Since wood is subject to deformation changes under the influence of moisture, many site owners are thinking about how to make a shower in the country with their own hands from more practical and resistant materials, such as polycarbonate. The frame part of the cabin is made in the same way as in the case of a wooden shower, however, a metal profile must be used as the material. The optimal section size is 4x6 cm.

The frame part of the cabin is formed with the help of racks and jumpers between them. In this case, metal elements are used, so a welding machine is required to fasten them. Moreover, the assembly order can be performed in several ways. In the first case, the frame part is welded separately, after which it is installed on the base and fastened with anchor bolts. The second method involves concreting racks during the pouring of the foundation. Then the strapping is formed, spacers are attached.

It is desirable to use a 1 cm thick sheet material as a polycarbonate shower sheathing. It is fixed on a metal frame with the help of hardware, which must necessarily have sealing gaskets.

Installation of the tank and features of the construction of a shower in a country house with heating by one's own hands

At the last stage of the construction of the shower, a tank is installed. The container can be made independently using any container made of stainless steel or plastic. To do this, it is necessary to form a hole in the bottom, the diameter of which is 1.5 cm. A pipe segment with a thread on both sides is attached to it with the help of nuts. The length of this element should be 30 cm.

In the roof of the cabin in the center, you need to make a hole where the pipe will be inserted. After installing the tank, a tap and a watering can made of plastic are screwed onto the free end. Then the container is firmly fixed on the frame of the frame part of the booth, filled with water and covered with a lid.

To create a summer shower with heating for a summer residence, it is enough to install a heating element in the tank. Of course, the natural energy of the sun can be used to heat water. In this case, there will be no electricity costs. However, the sun's rays are not able to heat a large volume of liquid. In addition, not every region has the necessary climatic conditions.

On the network you can find many schemes necessary for connecting a summer shower for a heated cottage to electricity. The advantage of these devices is that the water warms up in the tank quickly enough, regardless of the time of day and the weather outside. In this case, a person can independently adjust the temperature regime. If you attach a piece of foam to the hose, the warmest water will flow into the watering can. For the same reason, liquid is taken from the upper zone of the tank.

Useful advice! To speed up the process of heating the liquid, you can add a coil to the circuit.

Is it possible to buy a summer shower for a summer residence inexpensively: prices for finished structures

To simplify the construction technology, you can buy a ready-made summer shower and install it on a prepared base. The cost of cabins is varied and depends on various factors.

The following points affect the price of products:

• material of manufacture;
• modification (presence of a locker room);
• the shape of the water tank (in the form of a barrel, a square tank);
• equipment (presence of a heating element, tank, temperature sensor, etc.);
• tank capacity;

• the material from which the water tank is made.

Average prices for finished structures

Name	price, rub.
Metal frame and PVC fabric
garden shower
Garden shower with water heater
Garden shower with water heater and dressing room
Polycarbonate construction
Cabin with 130 l tank
Cabin with 200 l tank
Cabin with 130 l tank with heating

A wide variety of materials suitable for construction, as well as manufacturing technologies, allows any summer resident to acquire a comfortable and convenient shower in the country. Moreover, you can make a booth yourself from improvised means or purchase it ready-made in a specialized store.