Table for summer cottage- not just a piece of furniture, it is a ritual place where all household members invariably gather. In the summer, no one wants to go indoors to drink tea or have lunch. On fresh air and the appetite is better, and the food tastes better. In order not to carry furniture from home for gatherings, you can make an outdoor table for your dacha with your own hands, at the same time taking care of the benches.
garden table with built-in bench
A country table does not imply a complex design, so assembling it will not be a problem even remote from carpentry and creative works personalities. We will present you with several very simple and at the same time original ideas for creating it; perhaps some of what we have proposed will become a decoration for your site.
Material for country table
DIY garden table: interesting ideas
Conclusion
Photo gallery - DIY garden table:
the garden table must be durable
Outdoor furniture is subjected to serious testing, so it must be made from durable materials. Specifically for the table you can take:
- Stone.
- Tree.
- Metal.
- Available materials.
The tables from the latter look especially interesting. But first things first.
Wooden table
outdoor dining furniture set
Selecting material Special attention pay attention to the type of wood. There are different boards and boards and, in our case, not all are suitable for use. Pliable and easy to work with conifers, alas, will not fit. In addition to the fact that they need special impregnation, because they are too fire hazardous, the resin they release will spoil the tablecloth and dishes.
The necessary elements must be looked for among hardwood blanks. On the tabletop you need to assemble boards with a thickness of 30-50 mm. For added strength, they are stuffed onto a frame. The legs of the structure can be saddled straight or X-shaped. It is important to process all the details well so that there is no danger of driving a splinter while wiping the table. It is mandatory to treat the finished product with protective impregnations.
folding wooden table at the dacha with your own hands
In order to make a table “for centuries”, cover it with varnish, and do this, as they say, without sparing the brush. The composition must be literally rubbed into the wood, and this will only be possible if you slightly heat it in a water bath. Varnish coating make three layers.
Stone table
a round table and benches made of stone will last for decades
You want to do monolithic structure that amazes the imagination and creates a special mood for meals - try working with stone. You can create this type of table for your garden with your own hands or buy a finished product. Stores offer granite and marble options in wide range. There you can also select benches made of similar material to go with them.
to inspire life in old table, it is enough to tile the countertop
It will not be cheap, but if you really want to have such a luxury in the garden as a stone table, try to make it cheaper. Lay out the bases of the benches and table yourself. This will work quite well for this:
- Flagstone.
- Brick.
- Modern blocks.
- An ordinary cobblestone.
table made of stump, lined with stone
It will be much easier to fit these materials into the overall concept of the garden and combine them with existing buildings. It is quite possible to take it on the tabletop, seats and backrests fake diamond. The composition will not lose its view from this.
Metal tables
Those who are “friendly” with hardware and have it on hand welding machine, you may be interested in the option metal furniture. The products are elegant and aesthetic, with openwork decorative inserts. Metal table it will also need to be protected from premature destruction. This is done by priming the metal before final painting.
round garden table with stone countertop and curly metal legs
Forged tables will satisfy the needs of respectable owners, but it is impossible to make them with your own hands. Such designs are ordered by professionals. Forging requires the conditions of a forge. However, considering that products of this type can be wonderfully combined with wood, stone, glass, you can only purchase a forged base for the table and complete it with a tabletop yourself.
DIY garden table: interesting ideas
Styling the table and chairs to look like a mushroom meadow will create some zest in the landscape design of a summer cottage
If you are determined to work on creating a country table yourself and are ready to make it non-standard, look at the “unnecessary” things available in every shed. Perhaps among them there are items that can become consumables for creativity.
Assorted assortment
No less practical option For a country table, along with wooden, metal, rattan, and stone products, there is a “hodgepodge” of all sorts of things. This creation will become a multi-colored “character” of your garden and will never go unnoticed. What is it made from? You will not believe! Source materials will serve you:
- Broken flower stand.
- Metal barrel lid.
- Scraps of colored plastic or round glass.
timber set
Take a sheet of paper and try to draw a circular pattern on it in the spirit of Moroccan style. Enlarge your creation to the required size. A photocopier will help you do this quickly.
We place the resulting blank under glass and draw lines with a copper outline. Let it dry for a day or a little less. The manufacturer indicates the recommended drying time.
it is enough to decorate the sides of benches and chairs with wheels to get an original garden furniture for the dacha
Now it’s time to paint the marked glass stained glass paints. The main thing here is that the colors are located evenly within the area allocated to them. If you have never worked with specific paints, it makes sense to practice on a separate piece of glass in order to understand how much you need to use for high-quality painting of fragments. The completed painting must also be thoroughly dried.
The finished glass can be additionally decorated with elements drawn with a copper outline.
Cover the lid of the barrel with white paint, which will hide traces of rust, and proceed to preparing the main part of the tabletop.
garden table made from a basket of firewood
Metal part flower stand, which will serve as a supportDIY garden tableneeds to be primed and painted acrylic paint copper color and partially patinated.
Once the footboard is ready, seal the areas where it touches the glass with window sealant. This is necessary for its better fastening.
Now the final stage. Put all the pieces together: arrange glass table top into the lid and place the composition on the stand.
It may not be very comfortable to dine at such a table, but drinking coffee in the cool of the evening will be very pleasant.
By decorating an ordinary tree stump with mosaics, you can get an original table
Pallet models
After building a country house, you probably still have at least a few pallets on which packaged bricks or building mixtures. You don’t even suspect what a lifesaver this is for decorating your dacha. With their help, the table will be ready in a few hours, and it will look such that it will not be a shame to place it not only in the garden, but also in home interior. In this case, note that you will not even incur any special financial costs.
garden table made from pallets
A table for a garden, made with your own hands from pallets, can be constructed in several ways. For example, for the most simple option you will need:
- Screwdriver.
- Brushes.
- Sandpaper.
- Swivel wheels.
- Colored antiseptic stain.
- Screws.
mobile table for a garden made from pallets
First of all, start sanding the pallet. At the first stage of removing the rough layer, use coarse-grained sandpaper; fine-grained sandpaper will be needed for final processing. If you have a grinder in use, the configuration of which includes grinding wheel, use it instead of rolls of sandpaper. This will speed up the preparation process.
master class on making a table for a garden with your own hands
Turn the tray over and attach small casters to the bottom. This is done using ordinary screws. For greater reliability of fastening, place under the last washers, which can be removed from similar screws used for working with metal tiles. Don't ignore this advice. The wheel bases have fairly large holes, and a screw without a backing will not be able to properly secure the part to a wooden surface.
step-by-step process of making a table
Now all that remains is to open the finished product with a wax-containing antiseptic. If you want to highlight the structure of the wood, use a transparent composition. To add color you will need a stain. You can style the table:
- under oak;
- larch;
- rosewood;
- nut;
- pine
A low wide table would be appropriate on the veranda, in attic room, bathhouse interior.
without additional processing the table will last at least two seasons
If you want to make your summer recreation area more comfortable, make not just a table from pallets, but a whole set country furniture, supplementing it with permanently fixed benches. Such a kit can be made portable and, if necessary, moved from the barbecue, say, to the pool or to the pergola.
bright table made of pallets for the whole family
A creative option for a country setting would be a pallet transformed into a tabletop and equipped with vintage legs left over from an old chest of drawers, table, or cabinet. This detail needs to be highlighted in a contrasting color.
You can use such furniture in the bedroom, gazebo, or on the terrace.
Reel table
Vertical planks allow you to place various items
“The coil itself is heavy, but it’s easy to construct a lightweight version from it table for the dacha and again, do it yourself »
Cable reel too excellent material for creating country house design. Look at it – it’s almost a finished table! A little decor and it's ready to use. The easiest way to decorate a reel is with twisted twine. To do this, simply wrap it tightly around its trunk. The upper disk of the structure is sanded and varnished. If you want to add functionality to the product, install vertical slats around the circumference. They can also be decorated with rope. With the advent of crossbars, you can store the necessary items under the table.
reel table with umbrella mount
The coil itself is heavy, but it’s easy to use it to construct a lightweight version of a table for a summer house and, again, do it yourself. You will only need the top disk from the product, which will act as a tabletop. The frame frame for its installation can be made of metal.
If in shady garden If you find a stump of suitable height and strength, then it can also be converted into an improvised table using a reel disk. This idea will be good not only for a playground, it can also be rationally used when organizing a relaxation corner for adults. By sawing a wooden disk in half, you can assemble original chairs, which can also be placed on stump legs. This will make a nice garden set.
a table made from a reel can be decorated with any pattern
Wood table?
Why not? This brutal option can decorate a barbecue area or even a living room. Work is nothing at all. Finding the old thick log, saturate it with stain and level it bottom part, giving the product stability.
table on wheels made of stump
A mobile table made of hemp is no less simple to manufacture and attractive in design. By the way, its functionality can be expanded if you are not too lazy to sew a foam seat on it, which will allow you to easily transform the structure into a comfortable pouf.
Not in short supply at the dacha and chopped firewood. Using them, it’s also not a problem to quickly build a comfortable table design for your garden with your own hands. Assemble a flat base and secure the split timber into the tabletop with a strap tie. Put it all down and enjoy communing with primeval nature to the fullest.
table for a living room from an old log
Garden composition made of tires
Take your time to get rid of old tires. With them you can make a magnificent landscape decor with extended functionality: use the table not just as a table, and the pouf next to it not only as a pouf, but also create a place inside them for gardening tools, For example.
table and chairs are made in one designer style from old tires
Paint the tires in a color acceptable to you, dry them, fold them into a column, holding the elements together silicone sealant or other suitable composition.
Now work on the table top and seat. It’s a good idea to make the first one from durable plastic or cut it out of wood. For the pouffe, also cut out a plywood disk with a slightly smaller diameter than tires, glue foam rubber to it and cover it with fabric. The removable parts are ready.
Cooking table
mobile table made from old quartz with a wooden tabletop
Did you find grandma's brew in the bins? Fabulous! Let's transform it into a mobile storage table. We equip the bottom with wheels, and for the upper part we assemble a tabletop from boards. Having cut the boards to size, we assemble them together into transverse strips, the length of which should correspond to the diameter of the weld. This will help the tabletop stay firmly in place and not move to the side or tip over at the slightest load. There will be enough space inside the makeshift table to organize a mini-bar.
Using the same principle, you can transform it into useful items empty boxes, barrels, etc.
original table with large metal wheels instead of legs and built-in benches
Conclusion
As you can see, assembling a garden table with your own hands is a very exciting and absolutely not labor-intensive activity. Here, even beginners will not have to be afraid of ruining something, because the work will be done with items and elements that are initially unsuitable for direct use. Try your hand at something that is unfamiliar to you. Perhaps the final results will become an incentive not to stop there, but to go further. From the presented materials you can make many more unusual and useful things in your country life!
Photo gallery - DIY garden table:
IN modern interior Wooden furniture is often found - it adds coziness, such furniture is environmentally friendly and, with proper surface treatment, is easy to clean.
The table itself is an extremely functional invention, in demand in the kitchen, in the workshop, and in the office.
A wooden table combines functionalism, environmental friendliness and aesthetics. You can make such a piece of furniture with your own hands.
If you intend to assemble a table yourself, the first thing you should pay attention to is the material of manufacture. Very rarely, a whole tree cut is used as a material at hand, much more often - wooden boards. Advantages of this material: they can be cut to the required sizes at any construction site; It’s also easy to take them to the assembly site if you have a personal car.
Of the minuses can only be called possible difficulties problems that may arise during installation, and also what you should pay attention to correct processing material - otherwise the boards may come apart and will not last long.
Sexual
This material is used for flooring, for cladding buildings and premises and, according to the topic of this article, for the manufacture of interior items. Advantages such material are as follows:
- Most floorboards have a groove, as this is how they are held together.
This allows without unnecessary problems fasten the boards into a tabletop, while the joints will be identical and look aesthetically beautiful;
- most of edged boards has already been processed, so after assembling the table you do not need to resort to additional painting or varnishing of the product;
- even if the floorboard is an ordinary edged one, it still fits together with other boards better than the rest.
But the floorboard also has flaws. For example, for a board that has been varnished, a buyer can pay a large amount, than for an ordinary one with subsequent independent coating. Batten has a limited size, that is, its size will dictate the size of the tabletop, or you will have to adjust the length yourself.
Important. It is impossible to make legs from a floorboard, only a tabletop. This means that you will have to select a different material for the legs.
Unedged
This board has jagged edges with bark, since it is made by longitudinally cutting a tree trunk. Such boards are cheaper, with their help you can achieve original design solutions. But at the same time, they require additional processing, and joining them is quite difficult.
Oak
They are distinguished by unique strength, density and resistance to many biological and physical influences. Very Expensive, but in terms of service life, this material completely pays for itself.
Drawing
A drawing is necessary, because thanks to it the table will fit exactly into the room. The drawing will also allow you to calculate the volume of material required. But first things first. What problems will the drawing allow you to solve?
- Dimensions. If it's a kitchen table and the kitchen isn't standard sizes, and the table, accordingly, will differ from the standards.
- Model. Despite the fact that in the general idea a table is four legs and a tabletop, there is great amount options on how to make it. There are a lot of table models, types of table tops and legs.
- Calculation consumables . Having basic mathematical skills, you can calculate the volume of required material from the finished drawing. So that after purchasing a board, it does not turn out that there are a lot of scraps left, or that there is not enough material.
Advice. You can download finished drawing from the Internet and modify it to suit your needs.
Tools
To complete the work, you may need the following tools, which should be prepared in advance:
- hammer;
- chisel;
- hacksaw;
- drill;
- plane;
- nail puller;
- saw.
Advice. If further work with the tool is not planned, then you don’t have to buy it, but rent it.
How to do it?
After the material is selected, a drawing is prepared and that’s it necessary tools, you can start for assembly. When drawing up the drawing of the table, all its constituent elements, as well as fastenings, were highlighted. First of all, all the necessary elements are cut out and turned in accordance with the dimensions indicated in the drawings. Then, after checking and measuring after production, you can proceed to assembling the parts.
Important. Tools may cause damage. Follow safety precautions.
Assembly order quite simple, you can identify general steps regardless of what model of table you plan to assemble. The assembly steps are as follows:
1. Assembling the legs. The table legs, cut according to the drawing, are fastened with beams using self-tapping screws or nails. For greater reliability, the fastening points should be treated with glue and then tightened with self-tapping screws.
2. Attached to the leg structure table top. To do this, strips are marked on the tabletop that fasten the legs, then using self-tapping screws, nails, screws or fasteners, the tabletop is attached to the structure of the legs.
3. Installation horizontal screed. Many table models require a tie between the table legs to prevent them from moving apart.
Finishing
After the product is assembled, it must be processed. Processing is necessary to ensure that the product is resistant to exposure external environment and lasted many times longer than without treatment.
Processing a product means polishing it and then opening with varnish. Most often, sanding and varnishing are done several times for greater reliability.
Photo
We invite you to admire the possible results of the work:
Useful video
All manufacturing stages can be seen in the following video.
Conclusion
A table made of wooden boards, made by yourself, is a wonderful element of the interior that pleases the eye and provides comfort in the home.
In contact with
If you dream of having a pleasant time in your garden plot, then you simply need big table, which can accommodate a group of your friends and family. Moreover, you can do it with your own hands, spending very little time on it. In some cases you may need a helper, sometimes an extra pair of hands won't hurt.
This article provides detailed step-by-step instructions for making a wooden table for a summer house.
So that you have a choice, we offer you four options for country table designs - two regular tables for a picnic, a table with benches that form a single structural unit, and finally a round table. You should think through all the details in advance and choose the type and size of table that would suit your needs and the style of your garden plot.
Folding picnic tables - mobility comes first
Folding tables are very convenient, and most importantly practical and simple. They don't take up much space. At any moment, such a table can be neatly folded into the garage, and, if necessary, again moved outside. The mobility of furniture is especially appreciated in small areas.
How to make a garden wooden table with your own hands
A dacha is the place where a craftsman, a carpenter, a carpenter, a gardener, in general, a master, awakens in a person. Buy furniture for suburban area- it’s a simple matter, but not everyone can make a wooden table for their dacha with their own hands. You must immediately be prepared for what to do garden table you will do it yourself for a few days. But the tips listed below will help you make a good-quality table yourself.
Today we will build a fairly simple country table with our own hands in the Provencal style. Such tables not only look great, but also have quite reliable design. It's worth paying attention to the boards. They must be even, since the appearance of our country table will directly depend on this.
When designing a table for a summer house, it is necessary to prepare lumber in three dimensions:
- Supporting frame - section 38 x 90 mm.
- Tabletop - section 38 X 140 mm.
- Supporting strips - section 19 X 64 mm.
- Drawing
Before starting work, the most important thing is to find it on the Internet, or make your own drawings of a table for a summer house with your own hands. An accurate schematic designation will allow you to select lumber that will be most suitable in cross-section to the dimensions indicated on the diagram. It doesn’t matter if the dimensions don’t exactly match each other, because you can always make an adjustment using an electric planer.
- Preparation of material
When deciding how to make a garden wooden table, approach the issue responsibly, since the life of the furniture will depend on this:
- purchase of blanks. Professionals advise purchasing lumber from coniferous trees, which was previously well dried. Its main advantages are:
- price;
- simplicity and ease of manual processing;
- beautiful structure;
- furniture glue;
- 4 X 65 mm screws;
- 3 mm drill;
- drill;
- tape measure, pencil, sandpaper.
- Further actions
We will need:
- two upper transverse beams, dimensions 38 X 90 X 978 mm;
- four legs for a country table with your own hands, size 38 X 90 X 695 mm;
- two bowstrings - 38 X 90 X 921 mm;
- one longitudinal lower and one upper beam - 38 X 90 X 1575 mm and 38 X 90 X 1473 mm, respectively;
- two pieces of braces 38 X 90 X 772 mm;
- blanks for the tabletop - seven pieces, measuring 38 x 90 x 2337 mm;
- six support strips - 19 X 64 X 432 mm.
Advice: you should start working on flat surface. It is extremely necessary to observe the joining angles of the parts. The blanks, which will later become the legs of our country table, should be cut on both sides at an angle of 10°. The cuts must be parallel. But the bowstring blanks, which are similarly cut at the same angle, should be cut one towards the other.
Stage 2. The legs of our country table should be attached to the cross beams and this entire structure should be fastened with screws. There are two screws for each connection.
We screw the string diagonally to the leg with inside, in the same way fastening the structure with two screws.
The lower beam must be used to connect both strings to each other. As mentioned above, using screws.
Next, holes are first made in the upper longitudinal and transverse beams for fastener, called a dowel, after which we again diagonally connect the blanks of our country wooden table with the existing screws.
Tip: when connecting all the elements, use glue for additional strength. Remove excess immediately.
We place the braces on the screws.
Tip: blanks intended for braces should first be cut at an angle of 45 degrees
We fasten the blanks for the table top with screws to the cross beams with our own hands.
How to make a rectangular table for a garden
After developing a work plan and approving the drawings of the garden table, purchase all the materials needed for this project. Choose wood designed for outdoor use - pine, cedar, redwood or pressure-treated wood. When purchasing, check each board: they must be completely smooth and without any visible defects. Do not skimp on the quality of lumber, because your structure will have to withstand all weather adversity.
There are a few important points, which you must take into account if you want the result to be high professional level. Do not forget about the accuracy of measurement and use professional tool when cutting boards and bars and drilling holes. To increase the reliability of the design, you can additionally use waterproof glue for fastening parts. Round open edges using a router or sandpaper.
Attention! Dimensions are based on the inch system and may not correspond to metric system measurements. Choose lumber that is as close in size as possible. Or just customize it yourself.
Tools required to implement the project:
- hacksaw, jigsaw;
- milling cutter;
- drill and drill bits;
- chalk cord, tape measure, spirit level, pencil;
- safety glasses and gloves.
Time:
- From one day to a week depending on the chosen project. If you have power tools at your disposal, you can finish the job even faster - in just a few hours.
Adviсe:
- A router will help smooth the edges of wooden blocks and boards.
- Before screwing in screws and self-tapping screws, drill pilot holes in the wooden structural elements.
- The heads of the screws that are screwed in should not protrude above the wooden surface, and for this, the entrance parts of the holes must be countersunk.
- Do not use cracked or warped lumber.
- Do not use excessive force when tightening the screws, otherwise the wood may crack.
DIY picnic table. Step-by-step instruction
Materials:
- A - Legs: 5x10 cm bars, 106 cm long (2 pcs.), 43 cm long (2 pcs.) and 56 cm long (2 pcs.);
- B - Frame: bars 5x10 cm, length 87 cm (2 pcs.);
- C - Tabletop: boards 5×15 cm, length 180 cm (6 pcs.);
- D - Tabletop base: boards 5x15 cm, length 87 cm (2 pcs.), bars 5x10 cm, length 62 cm (2 pcs.).
The first stage of the project is making the table legs. Saw off the bars of the required size. To speed up the process, you can use circular saw. Smooth the edges of the bars and cut lines sandpaper.
Connect the bars to form an X-shaped structure and fasten them with 60 mm self-tapping screws, not forgetting to pre-drill the guide holes. Lubricate the joints with glue. Make sure there are no cracks or gaps.
Fasten each pair of legs with a horizontal block, using 60 mm self-tapping screws for this purpose. Cut off the ends of the bars as shown in the figure.
Place the boards intended for making the tabletop on a flat surface. We advise you to place pieces of 6 mm plywood between them, this will create uniform gaps. Place the assembled table sides on the tabletop and secure them by screwing in self-tapping screws at an angle of 90 mm. Before fixing, make sure the legs and table top are perpendicular using a spirit level.
Place sawn pieces of 5x15 cm boards on the underside of the tabletop and secure them with 60 mm self-tapping screws.
Saw off the ends of the bars, which will serve as supports reinforcing the structure, at an angle of 45º. Place the supports in their place and secure with 90 mm self-tapping screws screwed in at an angle.
And finally, last but not least: check that the heads of the screws do not protrude above the wooden surface, and fill all cracks and holes with wood putty.
Tip: To protect wooden surfaces from the damaging effects of atmospheric moisture, cover them with several layers of exterior paint or stain.
Table with benches. Instructions with drawings
Materials:
- A - Legs: bars 5x10 cm, length 95 cm (4 pcs.);
- B - Crossbars: bars 5×10 cm, length 160 cm (2 pcs.);
- C - Fastening the tabletop: 5×10 cm bars, 75 cm long (5 pcs.);
- D - Inclined supports: bars 5x10 cm, length 84 cm (2 pcs.);
- E - Tabletop: boards 5x10 cm, length 180 cm (14 pcs.).
You should start by making the legs. Since the legs of this table will be inclined, the ends of the 100 cm long bars should be cut at an angle of 30º. Connect the elements with 90 mm bolts.
Make sure the surface you are working on is fairly level. The mounted sides of the table must be identical, only in this case can you hope for an excellent final result.
When the sides of the table are ready, you can start making wooden table top. We recommend that you knock it together on the ground (floor), and then attach it to the legs using self-tapping screws.
Tip: Don't forget to make sure the side walls of the table are vertical using a spirit level, otherwise the end result of your work is unlikely to satisfy you.
Rigidly fix the entire structure using inclined supports. Their ends should first be cut at an angle of 26º.
Now all that remains is to build the benches. Saw off the boards the right size, place them on both sides of the table and, having previously drilled several guide holes at a distance of at least 1 cm from the edges, secure them with self-tapping screws.
Tip: To ensure that the seat boards are evenly distributed, place nails or pieces of plywood between them before attaching them. Thanks to this little trick, all the gaps will be the same.
At the end of the work, pay attention to small but very important touches. Fill all cracks and holes with wood putty. After the putty has dried, sand the wood surfaces with medium-grit sandpaper.
Tip: Be sure to apply several coats of paint or stain to protect wood surfaces from exposure to water and sunlight.
Round table. We do it at the dacha on our own
Materials:
- A - Base: 5×10 cm block 102.5 cm long (1 piece) and 47 cm long (2 pieces), 2.5×10 cm block 9 cm long (4 pieces);
- B - Stands: bars 10×10 cm, length 60 cm (4 pcs.);
- C - Tabletop base: 5x10 cm bars 82.5 cm long (1 pc.) and 52.5 cm long (2 pcs.), 2.5x10 cm bars 47.5 cm long (4 pcs.) and 60 cm long (2 pcs.) ;
- D - Tabletop: boards 2.5×15 cm, length 195 cm (9 pcs.).
The first stage of the project is to create the table base. To connect its constituent elements, use waterproof glue and self-tapping screws. Make sure that the corners formed by the bars being connected are straight. To protect the assembled table base from rotting under the influence of rainwater, place it on small stands made from scrap 2.5x10 cm boards.
Now you need to attach four posts made from square bars to the base. Before fixing, make sure they are vertical using a spirit level. The height of the legs may differ from what we propose; in this case, you should, first of all, be guided by your own needs.
The most difficult stage of the project is making the countertop. Place the boards on a flat surface and mark the center of the square. Secure one end of a 60 cm strip at this point. Rotate the other end of the staff to mark the outline of the circle. A jigsaw with a sharp blade will allow you to make circular cuts at a high professional level.
After cutting the boards of the future tabletop, we recommend that you fasten them together waterproof glue and additionally secure with several clamps. Attach the bars that serve as the base of the tabletop, as shown in the picture (yellow elements should be made from 5x10 cm bars, green ones from 2.5x10 cm bars).
Tip: To attach the bars to the tabletop, use waterproof glue and galvanized screws (30 mm self-tapping screws for fastening 2.5x10 cm bars and 50 mm for fastening 5x10 cm bars).
After the glue has dried, you should attach the legs to the base of the tabletop using 90 mm self-tapping screws, having previously drilled pilot holes. Use a spirit level to check the perpendicularity of the legs and tabletop.
To ensure that the result of your work corresponds to a high professional level, make sure that the heads of the screws are recessed deep enough. Cover all cracks and holes with wood putty, and after it dries, sand the surface with sandpaper.
Tip: Apply several coats of exterior paint or stain to protect the table from moisture damage. To ensure that the base stands are also untouched by water, place the table on concrete surface and seal them hermetically.
Now you know how to make a picnic table yourself. You just have to put in a little effort, which will subsequently be rewarded with enthusiastic exclamations from friends and pleasant summer evenings spent with your family at a large table.
We will send the material to you by e-mail
Not everyone likes to buy finished goods For home use. The soul of some people requires creative and practical self-realization. The editors of the online magazine website invites those interested to learn how to make a wooden table with their own hands, what is required for this, and whether there are any pitfalls in such work.
Beautiful wooden product for the kitchen or living room, made with love
Professional carpenters are unlikely to find our step-by-step recommendations, but for novice amateurs the advice will come in handy. First, let's look at what products you can make with your own hands from wood.
Of course, the more skills a person has, the more complex the model he can make. But to build a table with your own hands from wood, there are ready-made drawings and photos to help beginners.
How to choose a material for making your own wooden table for home and garden
What to make from dinner table with your own hands? Best of all - made of wood. The most pliable wood for a new master will be pine. Products made from poplar will look more solemn. For the street you can take mahogany.
If you want a simpler option for your home, then you should consider laminated chipboard with optimal thickness at 25-35 mm. On the tabletop you can take wooden boards, birch plywood with a thickness of 35 mm. Legs can be made of metal or wooden beam(about 50 mm thickness).
In order not to make a mistake with the amount of material, make a preliminary drawing future design with exactly specified dimensions.
Advice! Suitable product height varies between 750-800 mm.
Related article:
DIY wooden furniture: for the garden, children's room, kitchen, bathhouse, garden, gazebo; How to restore pieces of furniture, useful tips and recommendations from experts - read in our publication.
What tools are needed to make a wooden table with your own hands?
It doesn’t matter what shape the future table will be: working with wood requires a certain set of tools. You can’t do without a jigsaw, and it will be much easier to work with electric model. To secure all structural elements, use either a drill with a multi-stage drill for holes, or confirmations. To polish the product to perfection, you need a special attachment for a drill.
For greater fastening strength, the tools include wood glue.
How to make a wooden table with your own hands - step-by-step instructions
We have selected four types of structures that can be made on your own, even with a minimum of carpentry skills. We invite you to learn about the stages of manufacturing round and rectangular table, coffee table and models for garden gazebo.
Making a wooden round table
Easiest to do round table top and a connecting ring of or dimensions 1500 × 1500 mm and 1280 × 1280 mm. You will also need two laminated chipboard strips (1110 × 120 × 25 mm). We will make the legs from four wooden blocks measuring 120 × 50 × 750 mm.
How to make a countertop
How to draw a circle perfectly straight? Place your own on a sheet of plywood in the center thumb hands with a string attached to it with a pencil. The length of the rope from the base to the top should coincide with the radius of the future tabletop. Holding your finger in one place, draw a circle around the full length of the rope with a pencil. All that remains is to cut it out with a jigsaw.
The underframe circle is cut out in the same way.
Making legs
A round table made of wood or chipboard will look charming if you do everything consistently. You won’t have to bother with the legs if your plans aren’t too original. The bars are divided into 4 parts according to the desired size of the table height minus the thickness of the table top. First, one leg is cut off, and the other three are aligned along it.
All processing grinder is carried out immediately.
Advice! You shouldn’t rush into sanding, as the first coat of varnish will reveal all the imperfections.
Assembly of the structure and processing of the finished product
Assembly is carried out in stages. First, align the planks groove to groove. Then the crosspiece of the planks is connected to the legs with confirmations, as in the figure below:
If you want to make the structure stronger, before connecting the legs to the tabletop, coat their upper base with glue.
Advice! Nails are not used in this type of work: a self-tapping screw or confirmat can be unscrewed without any problems, and the connections will be much stronger.
Making a rectangular wooden kitchen table
The rectangular design is classic and very useful in everyday life: it is convenient to cook on such a table and you can comfortably dine at it.
How to make a countertop
A wooden tabletop for a table is made either from a whole sheet of plywood, or from individual edged boards processed to perfect smoothness.
Having fastened the boards with screws and glue, they begin to make the frame.
Making wooden legs for a table and frame
At the heart of the quadrangular models is a frame. It serves to securely fix the legs, ensuring the stability of the entire structure. The tabletop is turned over, a depth of 3-4 cm is measured on each side and the measurements are transferred to the boards. As a result, you will need two boards of shorter length and two longer.
The frame is made of four elements: according to the approximate ratio, these are two boards of X cm and two of 2X cm. They are connected to each other with an overlap one by one, building a rectangle. In order not to break the 90° angle, use any board when working with a screwdriver: it is used to press the structure while tightening the screws.
As soon as the frame box is ready, they begin to make the legs. You can take ready-made balusters for the table, buy metal supports or cut them out of bars according to the desired length according to the drawing.
Both the frame and the legs are subject to mandatory thorough sanding!
Product installation and final finishing
The frame is screwed to the tabletop with glue or self-tapping screws. Then the product is turned over and the legs begin to be attached.
Important! It's better to make holes for the screws in advance. This eliminates the possibility of the wood splitting.
Why don't they use nails and a hammer? Not everyone has the skills to work with a hammer - it’s not only dangerous to hit your finger. Overdoing it can easily damage the wood by splitting it. Confirmations and self-tapping screws hold the tree much more firmly.
As soon as the leg is secured, the angle is immediately checked: there should be no deviation from 90°. The operation is repeated with other legs. You can attach the legs directly through the tabletop, but this will affect the aesthetic component of the product.
Related article:
: photo best ideas. What can be made from pallets for an apartment, office and cottage; rules for selecting and processing pallets; Master classes on making a table, sofa, bench, armchair and shelving - read our publication.
Making your own wooden coffee table
Not only a beautiful interior element, but also a useful one. There is no need to look for a visible place to put a book, gadget, glasses, or TV remote control. Such necessary structures are made from different materials: metal, glass, plastic, chipboard, wood. But let's leave other materials alone and concentrate on working with wood.
The choice of a wooden tabletop for a table depends on the expectations of the owner of the product. Some people want something massive, while others prefer lighter options. Let's stick to a simple solution.
We purchase five boards 30 × 150 mm and process them to perfect smoothness. Immediately saw off the required length onto the tabletop: you should get 6 identical sheets. We take four bars for the legs, 6 shorter pieces for the lower tabletop, and 4 narrow slats for the frame.
| Illustration | Description of action |
|---|---|
 | To brush wood, use a grinder with a brass brush attachment. The procedure will expose the structure of the wood, giving the product a special flavor. |
 | We go back and forth along each board on the side that will be the front. |
 | We treat the wood with fire. The flame is gradually moved from place to place: the board will acquire a beautiful darkish tint. The procedure will completely destroy unnecessary soft wood fibers. We actively wipe the entire surface with a felt boot or a piece of felt. |
Let's begin the process of assembling a small table with our own hands from wood.
- The lower and upper tabletops are placed on the work surface with the wrong side facing you. The boards are laid tightly together, gluing them together. Once the boards have set, slats are attached to the top tabletop. They will serve as a frame and fastening element. They can be glued or screwed with self-tapping screws. The self-tapping screw is screwed into the center of the slats into each of the boards.
- The legs are screwed to both the tabletop and the slats. You can use furniture corners.
Video: the process of making a coffee table from wood
Making your own wooden table with benches for a gazebo
It's time to take the time and build a wooden garden table.
It is best to take standard size boards. IN hardware store Studs (suitable with a length of 16 cm), washers (24 pieces) are purchased. For a garden gazebo, long nails (8 cm) will do.
Whether to paint a product or simply varnish it is a matter of taste.
In modern conditions small apartments It’s quite difficult to give free rein to your imagination and purchase pieces of furniture that would suit everything. Among other things, it is quite difficult to find interior elements that would be attractive not only in design, but also in price. These two problems can be solved using the method self-made wooden furniture. This could be, for example, a table. You can do it by preparing everything necessary materials and tools. This piece of furniture can be used both in the kitchen and in the living room.
Preparatory work
In order to make a wooden table with your own hands, you will need to prepare some materials. You will need a furniture board with a thickness of 19 millimeters. This material is different high strength and looks very attractive. Shields on preparatory stage It will be necessary to mark, and then cut out blanks from them. It is important to stock up on the necessary fasteners for assembly. Thus, you will need to prepare 6 boards that will make up the lower support. Their size is 19 x 100 x 965 millimeters. There will be 4 legs, their dimensions are 19 x 215 x 680 mm. The same amount of leg molding will also come in handy, but the dimensions of these elements should be 1938 x 470 mm. The tabletop supports will be blanks with dimensions of 19 x 125 x 610 mm. Wooden table for a gazebo with your own hands you can make it to the same dimensions. The master must prepare two dowels for the legs with dimensions of 10 x 32 mm. Two lintels with dimensions of 19 x 140 x 1100 mm should also be highlighted.
Additional items
You will need a steel tie in the amount of two pieces, its size should be 150 mm. The tabletop will be limited to the following dimensions - 19 x 1020 x 1900 mm. The tabletop plank must be cut in two pieces and have dimensions of 19 x 19 x 1750 mm. Screws, washers, ties, and dowels will be used as fasteners.
Preparing tools
It will be impossible to make a wooden table with your own hands if you don’t stock up electric jigsaw, circular saw, hacksaw, drill with drills, plane, milling machine, file, clamps, brush. To attach the parts you will need carpenter's glue; the wood can be treated with sandpaper. The table will look good if you treat it with polyurethane varnish, which can be glossy or matte.
Manufacturing technology
If you decide to make a wooden table with your own hands, then you need to know that each supporting structure consists of 3 blanks glued together. An opening should be formed in the central part. Immediately you need to cut out 6 elements for two supports. Next, the master must make straight cuts using a circular saw. Corners should be rounded. In two blanks it is necessary to cut out the central part so that the groove fits on the central part of the support. The width of the groove should be slightly smaller compared to the thickness of the tenon in the leg. This will prevent the structure from loosening during swelling and drying.
At the next stage, you can glue the supports. After applying glue to the surface of the parts, they must be folded so that the upper edges are flush. Reliability of fastening will be ensured by clamps. After the supports have dried, you need to get rid of excess glue. After the clamps are removed, you need to plan the lower and upper edges.
Working on the legs
When making a wooden table with your own hands, you need to prepare four legs. Afterwards, the vertical edges must be planed and rounded using a milling machine. At the ends of long workpieces, it is necessary to mark and then cut out tenons, placing them at the bottom and top. This can be done using a circular saw, which must be equipped with a combination blade. After the moldings are cut and brought to the required dimensions, you can round all 4 ribs. It is necessary to make grooves for glue on the back surface of the moldings.
Work on supports
If you decide to make a wooden table with your own hands, photos of the design will help you decide what features this piece of furniture will have.
The next step is to cut out blanks for the supports. For gluing, select a 10 mm groove in each workpiece. It is preferable to perform these manipulations immediately. In order to simplify the task, you need to prepare a cardboard template, marking the location of the grooves on it. Next, you can perform pairwise gluing so that the cut is located in the central part. Everything needs to be tightened with clamps. Once the glue has dried, you need to clean the cuts using emery cloth.
Installation of legs
If you are making a wooden table with your own hands, you must first review the photos. It is important to initially adjust all connections without using glue. At the wide edges, the connections should be tight. A gap of 1.5 millimeters must be provided on the side to compensate for changes in the size of the wood. When edging, these elements will be decorated.
The walls and spikes must be treated with glue, after which you can begin pairing the legs with the vertical supports. Without waiting for the glue to dry, you need to make holes and reinforce the connection using dowels. If you decide that you will make a wooden table with your own hands, it is recommended to prepare the drawings at initial stage. For the legs, cut the moldings to the required length. They need to be glued and tightened using clamps. The glue is applied and then left until it dries.
If you decide to make a wooden table with your own hands, you can borrow the drawings from the article. The jumper should be installed high, so that those sitting at the table do not touch it with their feet. It is necessary to make gluing using two strips, which are previously edged with molding.
After the glue has dried, you need to remove the clamps and then chamfer. Holes must be made on the short sides to install fasteners. The tabletop can be made independently; its dimensions may differ from those presented above. At the ends you need to select tenons using a jigsaw.
Next, the cut areas are cleaned with a file. Along the long edges of the workpiece, it is necessary to install strips, which are pulled together with clamps and dried. By using edge cutter you need to align the edges of the moldings. They should be fixed to the planks, and then dried and the joints cleaned using a grinding machine.
When you make a wooden table for your garden with your own hands, the drawings will allow you to understand how the tabletop and legs are connected. To do this, use U-shaped brackets. On the long sides of the base, quarters should be selected to secure the sides. The ends of the last elements need to be rounded and cleaned. Afterwards everything is glued and compressed with clamps, and then left until dry.
Final works
Before you make a wooden table with your own hands, you need to familiarize yourself with the technology of the work. At the next stage, with a deviation of 100 millimeters from the edges of the base, it is necessary to make holes, the diameter of which should be equal to 20 millimeters. A through groove should be placed between them. The holes are required to prevent the base from splitting. If you are making a wooden table for your garden with your own hands, the drawings should help you carry out the work.
Now the master can assemble the table; to do this, it is necessary to fix the jumper to the legs. Using a pencil, you need to mark the position of the legs so that they are perpendicular to the ends of the lid. The brackets should be installed according to the markings. You need to make 10 holes in the tabletop to install screws. Next, you can strengthen the brackets. It is necessary to place a washer under each screw; this will compensate for shrinkage; this is the only way to make a folding wooden table with your own hands.
You can change the technology and dimensions of the table at your own discretion. However, it must be remembered that the design should be as strong and reliable as possible. It's important to protect wooden elements from negative impact external environment, especially for those pieces of furniture that are supposed to be used in the kitchen or outdoors.