It often happens that the situation is annoying, but nothing changes from rearranging the furniture.
The easy way out is to change old furniture for a new one, but this is not always affordable.
Therefore, to change the interior of the room, you can paint familiar objects in a new color, thereby enlivening the room and saving a decent amount on this.
It is best to do it yourself, giving yourself pleasure from work. How to paint old furniture?
Having asked a question, you should clearly know how to do it, and what is required for this.
To prepare the surface of objects for work, you will need the following tools and materials:
- putty
- paint container, roller and brushes
- fine-grained sandpaper
- rubber spatula
- grinder machine
- goggles and gloves for protective purposes
- masking tape
- dye
Having purchased and prepared everything you need, you can proceed to the preparatory.
Furniture preparation
You should carefully prepare the surface of the old product for painting, because the quality of painting depends on it. It is worth doing this, guided by step-by-step instructions:
- Inspect furniture for minor damage, repair them. Remove the doors from it, remove the drawers, remove the fittings. Use a spatula to remove loose particles of varnish and paint.
- Treat the entire area with fine-grained sandpaper. Such paper will not harm the wood of the furniture, it will not leave big scratches on it. You can use a grinder.
- Degrease the surface with vodka or alcohol to avoid the formation of a film. Cover the surface with a layer of primer, and then repair large defects and scratches with putty. Acrylic primer is best suited - it perfectly closes small cracks and scratches. Use a brush to apply primer. Let the primer dry well. Apply putty with a rubber spatula, carefully leveling the surface in this area.
- After allowing the putty to dry, sand the areas with sandpaper worn on a bar or grinder. Treat until a smooth and even surface is obtained.
- Remove dust from the surface of the furniture and prime it.
The primer for the last layer should be taken as close as possible in color to the future color of the furniture. Thus, paint will be saved and even coloring will be ensured.
Paint selection
Renewing the look of old furniture made from wood is not easy, but interesting job able to please the end result.
It is important to think in advance what color the restored item should be so that it fits organically into the rooms.
To do this, you need to carefully approach the choice of paint:
- The final color of the restoration can be matte or glossy. To fit the item to the existing decor of the room, it is easier to paint it with a covering tone of paint, for example, white.
- To pretend natural wood, you can highlight and emphasize the texture by applying transparent and translucent varnishes, stains, impregnations, enamels. Having cleaned the surface from the old coating, it will immediately become clear what type of coating should be applied.
- Use only compositions intended specifically for furniture. Having bought an expensive varnish for a yacht or parquet, you should not expect an exceptional result, but if you do not like it, it will be difficult to clean it off.
- For wooden surfaces, water-based acrylic formulations are more suitable. Even if wet, they are washed off even with water, but after drying well, they hold well on the surface, not being afraid of exposure to water.
The positive point of acrylic compositions is its vapor permeability, because air access is very important for it. Acrylic compound well protects the tree from mold and pests. They are odorless - you can carry out restoration right in the room - this will not be bad for either children or animals.
Spray paint lays flat on the surface and dries faster.
How to repaint old furniture - presented in the video:
The issue of restoring furniture made of chipboard rarely arises, since it does not last long and its place after wear in the country or in a landfill. But if the furniture is strong enough, then you can repaint it and it can still serve for several years.
Painting furniture from chipboard is not only updating the walls, but also strengthening the surface - it is she who is prone to various types of damage. Before you start painting work, you need to familiarize yourself with how to paint old chipboard furniture with your own hands.
First of all, you should prepare the details of the product for painting. To clean the surface of the old coating, one of two methods is used - chemical or thermal. Chemical is the use of various solvents to clean old coatings.
It is taken depending on what means the old furniture is covered with. Thermal is the use of heat treatment: air or steam, for which a building hair dryer should be used. Jet warm air softens the old coating, and it is easily removed with a spatula.
When all the old paint is removed, all the bumps and scratches should be repaired with putty, and after drying, treat them with sandpaper. Remove dust from the surface with a dry piece of cloth or blow off with a vacuum cleaner.
In addition, it is worth doing wet cleaningwhere painting will be done so that debris and dust do not sit on the freshly painted surface.
Perfect for refurbishing chipboard furniture acrylic paints because they are easy to apply and do not emit harmful compounds. Also a good option are alkyd and oil paints. Acrylic paint is available on water based so it dries quickly.
Before applying paint, cover the entire area of the product with a primer, it is important to choose it from the same manufacturer and select it according to the tone of the paint. You can apply it with a brush or roller, the main thing is that there is a thin layer - it dries faster.
After the primer has dried, you can paint the surface, for which a brush and roller are used. It is necessary to apply a layer of paint, moving in one direction, and the second layer will be covered perpendicular to the first, so that it lies as evenly as possible.
After the first layer has dried, the second layer can be applied. The number of layers depends on what color of furniture you want to get in the final version.
To give gloss and to make the surface smooth, painted furniture must be covered with a transparent varnish. Lacquer is applied thin layer roller or brush. It is better to treat the surface in several layers, waiting until the previous layer is completely dry.
The final touch will be the replacement of fittings or the restoration of the old one. Updated parts should be assembled, doors hung and drawers inserted. So old furniture gets a second birth and can serve for many more years.
Furniture restoration has its own secrets. Their use will help to complete this task faster, spending a minimum of money on it and, as a result, get the perfect look of the restored product. Tips include the following:
- Materials should be taken from one manufacturer: varnish, paint, primer, putty. In this case, their compatibility will not spoil the result of the restoration. The manufacturer also produces coatings for different types materials for the production of furniture.
- choose different color scheme to visually expand the dimensions of the room. The contrast of the furniture with the walls will also be unique, no matter what combination is chosen.
- Prepare for work a roller for applying varnish and paint on a wide surface, and different brushes, so that it is convenient to paint the ends of parts and accessories.
- Apply construction tape to keep painted surfaces from getting ink if several tones of paint are applied. It is not recommended to clean paint drops with a solvent - they can damage the finished surface.
- For safety reasons, always use a respirator and gloves when painting work. Periodically it is worth ventilating the room, even though varnishes and paints modern production do not emit toxins and pungent odors, precaution does not hurt.
These simple tips will help you avoid some mistakes and end up with an updated and high-quality item. Having trained on small items, you can confidently take on large sets: kitchen or furniture wall in the living room.
Do not immediately throw away old furniture that has become unusable or simply out of fashion. This is especially true for old wood products. As a rule, it was made qualitatively and for centuries.
Restoring an old wooden or chest of drawers is not difficult. As a result, the interior of the premises will be updated and satisfaction from the work done will be received.
Do you want to know about Painting wood furniture? The choice of paint, stages and application in the interior of the house. Surely you often caught yourself thinking that you want something new, for example, to update.
To do this, they usually decide to rearrange the furniture. But even this method does not always give the desired result. And then there is another way: to change the furniture, not its location in the rooms.
But very rarely we can afford to just throw out the old furniture and buy a new one, as this is beyond the budget. We will tell you about a way that is more economical and simple in order to freshen up the environment. It consists in painting furniture from.
Tools and materials
Very often, furniture that was made back in the USSR is of such high quality that it can last for many years, which cannot be said about many modern models. In addition, vintage-style home furnishings are now more popular than ever before. For this reason, painting furniture under the tree will be the ideal solution.
But how to do everything without noise and dust, and at the same time not turn your favorite apartment into the abode of an inept painter who can smell of all toxic agents? To do this, you will need to purchase special tools and materials.
For painting you will need the following:
Before you start work, you should prepare the furniture. For this you will need:
- Protective glasses.
- Gloves.
- Rubber spatula.
- Tray for paint.
- Tassels or.
- Glasses for protection.
- Sandpaper with fine grit.
- Wooden block or grinder.
When you prepare all the tools and materials, you can proceed. But before painting, it is worth bringing it into proper form so as not to make mistakes when painting.
Preparing furniture for painting
Proper preparation is the key to success. For this reason, you should carefully read the instructions and do everything exactly as described, so that after painting you get the desired effect.
Advice! When choosing a primer, try to choose a shade that will best match the shade of the furniture. This will not only make the color even, but also make it possible to save on paint.
What paint to choose
Commonly used varnishes of the following types:
- Epoxy.
- Oil.
- Alcoholic.
- Alkyd.
- Polyurethane.
- Nitrocellulose.
Unlike paint, varnish add surface durability and hardness. But if you have not yet decided on the choice of what paint to paint the furniture, make a choice in favor of any paint from the list below:
Stages of staining (using the example of a kitchen cabinet)
Most likely, you are thinking about this or that subjectthat can be painted. Very often these are kitchen cabinets, as they suffer from mechanical stress and moisture more than other furniture. Let's use the example of a kitchen cabinet to paint wooden furniture with our own hands.
Note, what when buying kitchen cabinets without finishing, in 8 out of 10 cases you will come across a birch. This wood has a fine-grained structure, and stain will look great on it. For example, when using a cherry stain, you can easily get a cherry color.
Stage #1: wood sanding. This one milestone in preparation. Take a sandpaper with a grit value of 120 and easily sand the wood. It is important to do this in the direction of the texture to avoid scratching. Next, take 220 sandpaper and sand the surface again to remove scratches and create a smooth surface.
Stage #2: tree. To apply the impregnation, carefully wipe the dust from the surface. In this case, the impregnation will serve and contribute to uniformity in staining. After application, you need to wait until it dries completely.
Stage 3: stain application. Ideally, it should be applied with a brush and in circular motions so that the product is well rubbed into the wood texture. Apply the final coat in the direction of the texture for a perfectly even surface.
Painting old chipboard furniture
Perhaps you have old furniture that is a pity to throw away and nowhere to put it. It can be in the barn, in the country and in the garage. Most of these items are made of chipboard - inexpensive, lightweight and comfortable material. You can give a second life to such furniture if you refresh the coating and paint it in a different color. In addition, painting as a refurbishment will help to strengthen the surface, which is subject to damage due to technical characteristics.
Before painting furniture, it should be well prepared. Since in this case chipboard material, there are two cleaning methods to choose from:
- Chemical. Under chemical cleaning means the use of certain means of chemical elements to remove the old coating. The tool is selected individually, depending on what kind of coating is on the furniture. It is important to use gloves when working.
- Thermal. In this case, the treatment is carried out with steam or hot air. But for this you will need a tool such as a building hair dryer. A blow of air from a hair dryer should be directed to the surface and wait until the varnish or paint has softened so that the coating can be removed with a scraper.
After cleaning, putty the surface and rub it with sandpaper.
To paint chipboard furniture, you will need acrylic paint in a can. So the work will be done faster, and the surface will be even. Great option in this case, alkyd / oil paints will also become.
Advice: if you plan to paint furniture with a brush, then it is better to do this only with new tools. Also pay attention to how strong the bristles are. If hairs fall out during work, this will have a bad effect on quality.
You know that painting wood furniture is done not only for reasons of economy and renewal, but also to create unique style. Fashion and its trends have captured wooden furniture, and even an old Soviet wall can look great with modern renovation if you work on it a little.
It will be enough to repaint it using the instructions given in this article. The main thing is that you immediately decide on the design. In the photo on the Internet you can see how to transform boring furniture.
When painting furniture, as in any other repair work, there are certain secrets. They will not only help you do everything faster, but also save money, and also provide excellent appearance.
Results
We hope you find this article helpful if you want to update your furniture with paint. As you can see, you can transform the whole house thanks to this simple method.
Painting furniture with your own hands is a fairly simple and very interesting task. We can create our own style and color scheme that you want.
Furniture can be not only just painted, you can create interesting patterns and drawings. One has only to imagine how bright furniture with funny cartoon drawings will look in a children's room.
First you need to prepare everything. Tools that will be needed in the process of work. The materials we will be using. And of course, the piece of furniture itself. Do not forget about the precautions.
You need to work in a well-ventilated area, make sure that there are no small insects, flies nearby. If such a midge sticks to a freshly painted surface, you will have to redo everything.
Be sure to protect the eyes and nasopharynx from dust and the smell of paint. You also need to take care of clothes that you don’t mind getting dirty, and gloves.
Cooking Tools
To prepare a piece of furniture for painting, we need:
- Goggles and gauze bandage.
- Sandpaper of different grits.
- Warm water and detergent.
- Soft brush and rag.
- Primer and putty.
- Rubber spatula.
- Screwdrivers.
- Building hair dryer.
Getting directly to painting furniture with your own hands, you need to make sure there are:
- Acrylic or latex paint.
- Lacquer, glossy or matte.
- Paint tray.
- Rollers and brushes.
- Masking tape or film.
- Stencils with patterns or drawings.
Advice! When choosing brushes, make sure that the bristles do not crumble.
Preparing furniture for painting and painting
This chapter describes how to paint furniture with your own hands at home - it's not at all difficult.
Below is detailed instructions preparation of furniture for painting and painting process:
- Wash a piece of furniture with detergent diluted in warm water.
- We disassemble the product into parts. Handles, drawers, doors.
- After complete drying, we clean the surface with fine-grained sandpaper.
- Apply a layer of acrylic primer. If there is deep cracks and chips, putty.
- You need another coat of primer to match the color of the paint. After drying, clean it with sandpaper.
- We clean the surface of dust with a soft dry brush or vacuum cleaner.
- We cover the surfaces that will not be painted with masking tape or film.
- We apply the first layer of paint and wait for complete drying. Then paint the next layer.
- After all layers of paint have dried, you can apply acrylic varnish.
- We are filming protective equipment from the painted product and leave it for a day.
- Painting furniture facades do-it-yourself is made in the same step-by-step way as the basis of the product.
Advice! Do not use a textile damp cloth to clean the dust after stripping, as the dust particles will clog into the pores and cracks of the surface.
Restoration and new ideas
Furniture can be repainted. You can update an old one with a damaged surface or restore a grandmother's inherited one, create something new that matches the style of the interior. Consider a few ideas on how to repaint furniture with your own hands.
polished furniture
Painting polished furniture with your own hands is as quite simple as painting wood. The only difference is the removal old polish or varnish.
There are several ways to do this:
- Chemical- the varnish is removed with the help of chemicals special means. They are simply applied to the surface to be cleaned, we wait for some time and use a spatula to remove the old coating. Rinse with water and prepare the product for painting. It should be borne in mind that the price of such funds is not very small.
- Mechanical– the old coating is removed manually using a scraper or sandpaper. This process is more affordable financially, but longer and more laborious. The process will proceed faster if there is a grinder.
- Thermal- use a building hair dryer or gas-burner. We work with both hands, with one we hold a hair dryer and heat the surface, with the other we scrape off the peeling varnish. This method is not suitable for all surfaces.
Having cleaned the piece of furniture from the old coating, we prepare it for painting.
Important! With any of the methods of cleaning old varnish, do not forget about the precautions. In case of chemical - we protect the skin and mucous surfaces; with mechanical - safety glasses are required; at thermal - it is necessary to exclude the risk of ignition.
We paint antique furniture
If a country or Provence style interior is planned, then the furniture needs to be decoratively aged. Painting antique furniture with your own hands is very simple and will bring incredible pleasure at the end of the work.
Furniture aging is done after the main painting or without it. Best to take chalk paints, which are used for home creativity. Matte water-based paints are also suitable.
We apply the paint in wide strokes, trying not to smudge. We are waiting for the first layer to dry, check whether it is necessary to walk with fine sandpaper to level the surface and apply the next layer.
- If we want the wood pattern to show through the paint, one coat will be enough.
- The effect that will make the furniture look old is done with fine-grained sandpaper. It is necessary to rub it with places where furniture is most often washed. For example, around handles and in corners.
- If you want to have a bleed effect old paint apply paint through a new, dry brush, rub a little with a rag and paint over the base color with a thin layer.
- You can use dark wax in places of frequent use of furniture to make the effect of temporary wear or contamination.
- The antiquity of wooden furniture will help create dark varnish and transparent wax.
- You can create the appearance of repeated painting of furniture, for this we apply several layers of paint, applying them in different directions.
All of these methods can be used individually or all together. It depends on desire and imagination.
So:
- When a piece of furniture dries, its surface must be protected. You can do this with furniture wax.. It can be either transparent or dark.
- Dark wax applied to the entire surface of the furniture will make the paint shade darker.. And by applying it in certain places, we will get an aging effect.
- We apply transparent wax with a foam sponge and rub it over the entire surface of the product. The wax dries in 20 minutes.
- Such pieces of furniture, such as a table, should be covered with an additional matte varnish.. Such things are exploited more often, so their protection should be stronger.
In the video in this article you can see how to age furniture.
Output
When we paint furniture with our own hands, we feel like real designers. We can not only create our own interior, but also save a good amount.
People living long time in one unchanging environment, they often experience an acute desire to update a bored interior. Then the moment and the logical question arises, how to paint the furniture? After all, it is she, in an updated color, that is able to refresh the bored interior appearance of the house. Tables, chairs, cabinets and bedside tables form the arrangement of the room, but replacing them with new models every time you want a change is an extremely unprofitable idea. Thus, painting furniture with your own hands becomes the best option. The following are painting tips.
Painting wooden furniture is easy, fast way update and refresh the look of the room
Consider the attractive aspect of the question of how to refresh furniture with your own hands. First of all, this is a material benefit: you do not have to spend a fortune on a purchase new fittings, services of a professional painter. Moreover, at self-painting you are free to show special ingenuity and creativity, giving the product the look you want.
To this day, many families keep cabinets with chairs that have been passed down from the older generation, back in Soviet times, made so conscientiously that they are still able to perform their task normally. But they have one significant disadvantage - external "shabby". In order to correct an unfortunate misunderstanding: to finally update the look of the furniture, we suggest painting it yourself.
Tools and materials needed for furniture painting
In order for painting furniture with your own hands to be successful, first of all you will need:
- a broken product that needs to be updated;
- a sufficient amount of paint;
- painting tape;
- brushes;
- shallow container.
This is not a complete list. Before proceeding directly to work, it is necessary to process the surface on which the paint layer will be applied.
Materials that will be useful in the process:
- putty;
- face protection (mask or goggles);
- a sufficient amount of sandpaper;
- wooden bar.
Paint selection
Before you paint the furniture, you need to determine what paint to paint the furniture. Here before you will appear the widest range colors in all colors. Do not rush to buy the first jar that comes across: the choice should be made based on knowledge of the properties of the material from which your product is made. So the painting will last longer, retaining its original freshness.
Acrylic lacquer has no pungent odor, suitable for outdoor and indoor use
Alcohol varnish is used for the restoration of antique interior items.
If you have not previously had to deal with the choice of paint, here is a list of manufacturers common on the market.
Painting process: step by step instructions
Important! – The key to high-quality staining lies in the careful preparation of the surface.
Where to begin?
- Inspection
Check the product for faults, breakdowns, defects. If there are any, eliminate them, then proceed to remove the old layer of varnish or paint.
Before painting, we disassemble and clean the furniture from dirt.
Remove old paint by heating or mechanically
You can also remove paint from furniture with a special remover.
- "Skin"
Go over the surface with a piece of sandpaper. Use fine-grained: it will not cause deep damage. It is more efficient to sand in the direction of the wood pattern - this way you will achieve a flat and smooth surface without scratches.
We grind the furniture first with hard, and then with soft sandpaper
- Primer coating
Spread a layer of primer around the perimeter of the product, then cover the flaws (potholes, cracks) with putty - so the adhesion of materials will be as strong as possible. Next, degrease the surface.
Priming wooden furniture
Filling large chips and cracks
- Application of acrylic primer
Spread the impregnating material evenly over the surface with a brush, then leave everything to dry.
- Puttying of defective places, grinding
Sand the places where the putty was applied grinder or sandpaper.
We putty small cracks and dents with a suitable color putty on wood
At the end of the complex procedures, remove the litter, and then re-coat everything with a primer.
- Paint application
Acrylic brush painting
Coloring with paint in cans
Important to consider
You can paint furniture with a brush or spray gun.
To do all the painting work correctly, you need to adhere to a number of subtleties. Knowing them, you can not only the shortest time effectively cope with the task, but also rationally save your budget.
Several useful tips thanks to which you will qualitatively paint furniture:
How to paint antique furniture?
The effect of artificial aging depending on the method of painting wood
Styling your furniture, giving it a touch of light antiquity is a feasible thing. It is not necessary to go to the workshops, spend a lot of money on it. To design accessories in a certain style (country or french provence- at your discretion), you can paint by artificial aging: with it appearance furniture will become more refined and give the room chic.
A few painting tips:
- Correct color selection
To make the painted look more attractive, and the effect of antiquity to be natural, use light pastel colors: White color, peach, beige, lemon, etc.
- Applying paint;
To achieve the desired effect, it is not necessary to apply layers one after another to give saturation. It is enough to apply just one - the main color will slightly show through it, adding to the picture a greater holistic naturalness.
- Grinding;
After applying a layer of paint, wait until it is completely dry, then treat the corners and those places of furniture that are most often subjected to mechanical stress (handles, corners, etc.), so the end result looks neater, and the “antique effect” becomes light natural. No one would think that the product is aged artificially.
A well-known method of “aging” furniture is to give the effect of translucence of old paint. To do this, you will need to use a new brush with which to evenly distribute the paint of the new color. After drying, this layer is rubbed off. To brighten up the scuffs, we recommend using wax: rub it on the surface, and you get an old white color.
Dry brush aging method "Loft" is suitable for creating an old and scratched look of furniture
The use of wax is appropriate when the item has been recently painted. furniture wax it is desirable to match the color of the countertop on which it is supposed to be applied. It is easier to rub the wax with a porous sponge - the product will be distributed more evenly over the entire area.
How to paint furniture white
Furniture painted white before and after do-it-yourself remodeling
A solution that could come to mind for people who are not afraid of difficulties. It is known that white is a problematic color. Its original appearance is difficult to maintain.
Video: Painting furniture with acrylic paints.
Everything has a lifespan and often after that you have to buy new thing, furniture or other element of the interior. But there are also moments when the material can be given new life by painting it with furniture paint. And it actually happens much better, and most importantly more economical. complete replacement decor element. I decided that I needed to update the chest of drawers from laminated chipboard and today I’ll tell you how to paint a cabinet with your own hands, which mixture is the most suitable and with what tools you need to update the furniture yourself.
We paint furniture
What do we need
Chest of drawers before and after painting
Before you paint old furniture, you need to arm yourself with painting tools. Since I have already carried out similar work more than once, I already had some elements, and some still had to be purchased. If you are new to this business, then stock up on these tools:
- Gloves to protect the skin of the hands
- masking tape
- Paint and a tray for her
- Roller, brushes and if there is an airbrush
But for quality pre-training wooden surface, you can see the master class and buy materials such as:
- Putty and spatulas of different sizes
- Brushes and gloves
- Eye protection glasses
- Fine-grained sandpaper
- Sanding machine or handmade timber
The choice of paint and auxiliary materials
We paint furniture ourselves
If you have to paint furniture with your own hands, then you need to choose the right paint. However, in addition to it, a primer, varnish and putty are also required for chips and cracks on the surface of the furniture.
Important! In order to understand as accurately as possible the technology of choosing paintwork materials and the very painting of a chest of drawers from chipboard or other furniture, you can watch a video master class.
A huge variety of colors makes you think before buying one or another type. However, do not forget that the type of material that you will paint plays a big role. For example, for furniture made of chipboard, one type is needed, and for metal surfaces, a completely different one. If you paint a chest of drawers in Provence style from chipboard, then choose from these mixtures:
- Acrylic blend is the most traditional among the other options. It has a sufficient number of advantages, and most importantly, it is diluted with water and can be used to paint furniture in children's rooms. Acrylic paints are very stable and have a much shorter drying time than other materials.
- For Provence-style chipboard elements, an aerosol acrylic mixture can be used. Due to the fact that it is in cans, there is no need to buy trays and paint brushes. Apply this paint to wooden surface, from chipboard or metal is not difficult. However, you should be aware that such paints are more expensive than conventional coatings.
- If you want to choose an enamel varnish paint and cover it with a wooden cabinet, you can achieve incredible shine and gloss. And for dullness, you can use oil paints for furniture.
- Transparent paint will preserve the relief of the painted surface
You can always read the instructions when choosing furniture paint in the appropriate store. Choose the shade you need using the color palette and do not forget to view the master class for decorating details in the Provence style with your own hands.
Important! Immediately see what furniture the paint should be used for. If the paint is intended for an outdoor pedestal or bench, then it should not be used inside the house.
How to get french style
Decorating a room in Provence style will not be very difficult, the main thing is to beautifully combine simple, but at the same time unique things. For example, a wicker chair is ready to fit perfectly into the interior of harmony and simplicity, and a chest or chest of drawers with wrought iron elements can be decorated with simple colors and patterns.
To recreate a Provence-style room, you can take some old item furniture, such as a chest of drawers and decorate it yourself in the following ways:
- Using soothing pastel paint, paint your chest of drawers and add a hint of provinciality to it by adding drawings of flowers or some birds.
- Use the decoupage technique, which is so suitable for interiors in the Provence style. Select a pattern, cut it out and, after gluing it to the surface, cover it with several layers of varnish
- Apply the staining method by aging the furniture. Make notches or chips on a dresser or cabinet, or use paint to create the effect of burnt surfaces
For clarity, it is better to watch a master class on aging furniture, but I want to say right away: for these purposes it is better to use natural wood furniture. Using various techniques and techniques, as well as chalk paints, you will be able to independently recreate elements in the Provence style and give the room a new amazing look of simplicity and taste. French Provence has long won the hearts of connoisseurs of everything exquisite.
Paint and restoration of polished furniture
Polished furniture is very easy to restore. Due to the fact that it does not have varnish coating, you don't have to delete this layer. It is possible to restore a chest of drawers from chipboard in the following ways:
- With the help of paint, update the product and give it a new shade
- Keep the existing texture and just open the chest of drawers with varnish
In order to paint polished furniture, choose a durable paint that does not fade in the sun. Otherwise, in a couple of years you will again have to update your cabinet or cabinet.
When you paint a chest of drawers made of chipboard, acrylic paints help not only to give an improved appearance, but also to extend the life of the material. But if we paint the panels themselves with such a mixture, then all auxiliary elements: handles, accessories should be painted with other specialized compounds.
When passive fire protection is required for furniture, it is worth using fire retardant mixtures. In this case, they completely cover all elements of furniture products. For outdoor metal compositions, paints must have corrosion protection properties and Zinga paint is a worthy choice.
When staining fibreboard follow this sequence:
- Remove all existing fittings from furniture for painting
- Using sandpaper, remove the top layer of varnish. If you have experience, then enlist the help of a grinder, but if you are a beginner, then it is better to do the job with sandpaper. Thus, the probability of hooking the veneer layer will be significantly reduced.
- All existing flaws and shortcomings should be removed with putty. After this process, no cracks or chips should remain on the surface.
- With the help of fine-grained sandpaper, it grinds the surface treated with putty
- We remove all dust and dirt, and then primer the area of painting. It is allowed to use a primer as a primer layer
- We apply the selected coating - it can be an acrylic-based paint or varnish, as well as a glyptal mixture
- After that, the furniture should be completely dry.
As you can see, there is nothing difficult in self-painting and restoration of old furniture. As always, you need to prepare the surface well and use quality materials and tools.