Plasterboard ceiling in the kitchen above the window. Plasterboard ceiling in the kitchen - the best design options

The start of renovations means for many an environment of chaos for an indefinite time. All inconveniences are compensated by an enchanting, eye-pleasing result. The modern style in the apartment is much different from the standard renovation of the last century. Innovative fashion solutions in apartment renovation will help to realize a lot of products on the market. Let's talk about the design of the ceiling in the kitchen with drywall, which is rightfully considered one of the most affordable easy-to-handle materials.

The kitchen is a very moody room. Odors, humidity, constantly changing temperature live in it. In this part of the apartment, as a rule, communications, appliances with wires, a lot of lighting fixtures for different zones are concentrated. The material for the ceiling should perfectly cope with the features of the food room and help to visually hide everything that is superfluous and give aesthetics. Ventilation is important for the dining area. GKL* is an environmentally friendly, breathable material that does not form mold and fungus and absorbs odors.

Advantages and disadvantages of drywall

The main advantages of GKL:

Fast, simple and inexpensive. It is a versatile and picky material that is easy to work with, easy to install and can be finished with a ceiling within a week. Regarding other finishing materials, drywall is affordable, and the result of the work will look expensive, modern and unusual.
GKL strength. Stretch ceilings, for example, are not that hard to tear. And drywall is a fairly durable material and therefore more durable than many.
Environmental friendliness. GKL consists of two materials: environmentally friendly gypsum, covered with cardboard on both sides. This allows drywall to "breathe" and it does not harm the inhabitants of the apartment.
GKL absorb odors, does not accumulate moisture (prevents the appearance of fungus and mold, which is often a cause for disappointment for the owners of the room), and are resistant to temperature changes. All these incidental manifestations of the kitchen area often cause a lot of problems and quickly spoil the appearance.
Aesthetics. With the help of drywall, it is easy to hide all the flaws that visually spoil the kitchen room: bumps, defects, wiring.
Lighting. Thanks to the space, you can hang any lamps at the same level as the ceiling.
Soundproofing. GKL additionally isolate the sound in the room, which contributes to the creation of the greatest comfort for all family members.
Warming. Thanks to the drywall construction, it is possible, if necessary, to make the room warmer by laying a special material between the ceiling and drywall.
GKL resistance. This material does not deform during the settlement of the building (relevant in new buildings), does not crack. These properties will save you from many problems, frustrations and save the family budget.
All kinds of interior options. Drywall gives free rein to all sorts of design solutions: it takes any shape, it can be made matte, glossy, depict any pattern, paint it in any color, it is easy to combine with other materials, it is convenient to mount the backlight.

The main disadvantages of GKL:

Loss of centimeters. The more levels of plasterboard ceiling you choose, the more it will eat cm. On average, one level takes 10 cm of height.
The construction of a plasterboard ceiling requires skill and may need to hire workers (in particular, this applies to ceilings of more than one level).

Summing up the "pros" and "cons" of the plasterboard ceiling in the kitchen, we see a clear superiority of the positive aspects. Having approved our position, we boldly proceed to the realization of the plan. Let's start with the premises.

How does the area of the kitchen affect the appearance of the ceiling

Before proceeding with the design of the ceiling, you need to assess the scale of the site for work.

A small kitchen in terms of area and height can be visually enlarged. Light shades, additional bright lamps and a single-level ceiling will help with this: color and light will illusoryly make the room larger, and one level will minimally take centimeters of height.

If the kitchen is large in size, but its height is minimal, then a multi-level ceiling will also not work, but you can easily experiment with the colors of the room.

Having very high walls, a multi-level plasterboard ceiling will make the space cozier and more aesthetically pleasing. To close the ventilation pipe, you can think about the option with a box. It will look much more aesthetically pleasing than the pipe itself.

For a living room combined with a kitchen, the division of zones with the help of a thoughtful design is perfect. For example, construct a ceiling flowing into a partition or arch. This option also looks great in a large kitchen: you can separate the working area from the dining area. A simpler option is the visual separation of zones with the help of lamps, color or a variety of curly patterns from plasterboard.

Decide how to visually enhance your living room with a ceiling and start designing the ceiling.

photos

Ceiling levels and their features

single level

The ceiling of the same level is suitable for all types of kitchens and it is quite possible to cope with the installation on your own, without resorting to the help of specialists. For lovers of the classic look, the ceiling of their GKL can be plastered and painted. The result is a standard look while maintaining the advantages of this material.

Designers advise for small rooms to choose glossy light-colored paint to visually enlarge the area. It is important to take into account the style of the room as a whole and choose the right color in harmony with the furniture.

For those who want to create something unusual, but have a low ceiling and small "squares" at their disposal - colors, patterns and lamps will come to the rescue. One of the best ways is to zone the kitchen. Highlighting the place where the dining table stands, or the middle of the kitchen is popular. With this arrangement of accents, you can darken the work areas. Also, light zones can be made with the help of light: install several bright lamps over the desired area, and distribute the rest of the light in the work areas as needed.

The individuality and originality of the kitchen room will give a drawing made on drywall. A unique pattern will transform the kitchen, help to emphasize the interior and set the right priorities.

duplex

Two levels of GKL will help you build a very spectacular ceiling. Walls below 2.5 meters in height are not suitable for such a design, because the structure will take about 15 centimeters.

A well-thought-out arrangement and combinations of heights will make the kitchen room more voluminous and solve a large number of interior tasks. Most often, high parts of the ceiling are placed in the center of the room or in the work area.

Plasterboard ceiling easily takes any shape. Usually combine oval and rectangular elements. Figures such as a snake and a spiral look interesting. Your imagination here is limitless.

Combinations of drywall with other types of material look great. Most often, gypsum boards are combined with stretch ceilings, wood and plywood.

Variations with light will be especially wonderful. Any lamps can be mounted in two-level ceilings. Proper zoning of space is necessary. One of the generally accepted combinations of the location of light sources on two levels is as follows: the main lamps are installed in the center of the room, and neon and LED lamps are placed at the edges below.

Another option for the light distribution looks like this: they illuminate certain areas with bright lamps (for example, a dinner table, a bar counter, paintings), while other areas are illuminated with a slightly dim light.

Combinations of colors, glossy and matte color, accents with a pattern look spectacular. Do not forget that bold decisions and previously unthinkable color combinations are in fashion now.

multilevel

From three levels or more, the ceiling is considered multi-level. If you own an apartment with ceilings from three meters high, then several levels of the ceiling will be an excellent interior design. This option is the most decorated. The play of lines, colors, light and textures will transform the kitchen and make it the most enchanting room where you want to hold receptions and arrange noble dinners.

When the height of the kitchen is more than four meters, and the area is small, then in general the room looks awkward. A decorated ceiling in several levels will perpetuate the room and make it much more comfortable.

Ceilings for the living room combined with the kitchen

The kitchen and living room are the most visited rooms in the apartment and house. In the combined premises they receive guests and arrange various events. Therefore, it is important to make these zones beautiful, solemn and cozy.

The most attractive option is to build a wall that will flow smoothly from the ceiling, or a shaped arch. The wall can be patterned, with windows and curtains, it can be decorated with a gallery of paintings. For the arch, you can pick up bizarre shapes that emphasize the overall style. Do not forget that the classics are very harmoniously and unusually combined with modernity. An area with a large dining table is perfectly highlighted by bright light. The recreation area can be made darker - this will additionally relax after a hearty dinner for the household and invited guests. In general, such an amount of space gives vent to the imagination. The main thing is to think carefully and act boldly.

In principle, any person is inclined to ensure that his plans come true as quickly as possible and it takes a minimum of physical and material costs. One of these finishing options is a do-it-yourself plasterboard ceiling in the kitchen, which, just like that, will help you save both time and money.

Ceiling plasterboard and methods of its installation

In this article, we will look at several options for how to make a plasterboard ceiling in a kitchen. The word "several" means a straight plane and an addition from the second tier of a suspended structure, but this will be just one of the many options used by the craftsmen.

Will you make only one plane, or will it be a multi-level plasterboard suspended ceiling in the kitchen - in any case, you need, first of all, to determine the thickness of the first tier or the depth of the ceiling sinus. Whatever the height of your kitchen, the minimum distance that you can lower the crate of the first plane is 25 mm, i.e. this is the thickness of the CD profile, and it is impossible to raise it above.
Therefore, find the lowest point on the main ceiling and lower yourself from it by at least 25 mm, making a mark on the wall. Now, with the help of a water level, transfer it to all corners of the room, internal and external. The ceiling for the kitchen from drywall will be 10-12 mm lower (drywall plus putty).

Between those marks that you made with the help of a water level, stretch the chokeline (paint cord) and beat off the control line.
Some people prefer to draw a guideline under the rule or a long level, but the plasterboard ceiling for the kitchen is much longer than the length of these tools, and it is extremely inconvenient to use them for this purpose.

We continue to mount the plasterboard ceiling in the kitchen with our own hands and install the UD profile so that its lower part coincides with the broken line.
Fastening is carried out on ordinary or impact dowels, after 30-40 cm, the optimal diameter of which is 6 mm (sometimes UD profiles are produced with ready-made holes for mounting).
Now you need to make a markup for the CD profiles and for this you need to decide on which crate the plasterboard ceilings for the kitchen will be mounted.
The fact is that there are two types of frame - transverse and cellular, but for the second, the consumption of components is much higher, although it does not exceed the first in strength. Therefore, we determine in which direction the GKL will be screwed, and across it we make markings after 50 cm.
This is a very important point, because the plasterboard ceiling in a small kitchen is mounted starting from the corner, and this corner must have 90⁰ for the plasterboard to fit correctly.
If there is no such angle, then markup with the expectation that the sheet will need to be cut. In large kitchens, this is a little easier, since the installation of sheets can be started from the middle, and then trimmed from pieces.

Now it is necessary to install consoles for CD profiles along the lines at a distance of 50-69 cm from each other. U-shaped galvanized suspensions are used as brackets. After fixing them, the ears are lowered, and the suspension takes the form of the letter P or, as they are also called, pawns.

Tip: it is best to mount hangers on dowels with a flared sleeve so that they do not fall into the void of the concrete floor.
Impact dowels have such a flare in the form of lapels, but it is better to change the screw on them to a thicker one so that the kit does not crawl out of the seat.

Making the ceiling in the kitchen with our own hands from drywall, we proceed to install the CD profiles and insert them into the UD under the already installed hangers. Make the length of each installed profile less than the required one by 5 mm so that no deformation occurs during installation.

Do not rush to fasten the profiles to the suspensions and to each other - they need to be leveled by stretching a nylon thread under them.
To prevent the profiles from pulling the thread, bend the central suspension under each of them. Then lower each CD in turn, screwing them to the hangers and to each other with small self-tapping screws (fleas).

Fastening GKL

When you marked out the plasterboard ceilings for the kitchen, you did it after 50 cm, and the sheet is 250 cm long, which means that the edges of the two sheets on the end side should lie on the profile, each on its own half.
For fixing, use self-tapping screws for metal 25 mm long and screw them in 30 cm apart. For one GCR, you will need approximately 50-60 pieces of screws.

It is better to lift a drywall sheet to the crate together, because its dimensions (250 × 120 cm) will not allow you to do it alone - the panel will break.
Some make various fixtures in the form of props, but this can be used as an extreme option. Of course, individual craftsmen are able to do this alone and without props, but they have many years of experience for this, and they use it in exceptional situations.

Tips: drywall is cut with a knife along the front side of the sheet and then broken, and a hacksaw is used for curly cutting (you can use a regular one for wood).
The head of the screw should be either flush or slightly recessed, but there is a danger of breaking through the paper, so it is better to use a special nozzle with a lampshade, as in the photo above.

Reading time ≈ 9 minutes

In order to beautifully decorate the renovation of the apartment and maintain the same style in all rooms, it is important to pay great attention to the technology of finishing the ceilings. In this article, we will take a closer look at how to make a false ceiling in a plasterboard kitchen on our own without the help of specialists.

If you want to save money, and at the same time learn how to collect, read this material very carefully.

Preparatory stage

The entire technology for creating false ceilings from plasterboard can be divided into several stages:

We determine the height of your ceilings and beat off the levels in the space of the room.
We expose special guides according to the created level.
We insert the profile, screw the brackets, create a frame for the desired level.
We place cotton wool in the space behind the false ceiling, put jumpers and apply drywall.

What tools you should purchase before installing a plasterboard ceiling in the kitchen:

Spirit level (a special tool for determining the level of horizontal placement of structures in the space of a room
2 meter level to determine the evenness of the installation
Ordinary tape measure (5 meters)
construction line
Standard triangular construction ruler
Drill with a set of nozzles
conventional screwdriver
Plane
Special knife (construction) with a set of replaceable blades, as well as a hacksaw
painter's pencil
Sandpaper

Instruments

To assemble the suspended ceiling structure in the kitchen, we need the following materials:

Plasterboard sheets (GKL). On both sides they are covered with soft textured cardboard, which is firmly glued to the plaster. The length of the GCR is from 2000 to 3000 mm, and the width is 1200 mm. Such sheets are usually finished with gray cardboard.
Fire-resistant plasterboard sheets (GKLO). Not used in residential areas, more often found in the industrial sector.
Waterproof plasterboard sheets (GKLV). Suitable for kitchens and showers in cases where ventilation is installed, which removes some of the moisture. Finishing - green cardboard.
Waterproof Gypsum boards of increased fire resistance (GKLVO). Aggregate functions and properties of absolutely all of the above types.
Gypsum fiber sheet (GVL). This type is not subject to cardboard finishing. It is super hard and hyper resistant to fire.
Waterproof Gypsum fiber sheet (GVLV).

Let's start creating a false ceiling

Stage of water level beating

You will need 1 assistant and a special tool - a water level. We draw on any of the walls at the level of your eyes with a pencil or chalk using a ruler a flat horizontal line parallel to the floor. Next, draw a vertical line in the same way to make a cross. Now this point is your assistant's place to catch the level. And you need to go through all the corners and draw lines.

In the water level, the water in both flasks should be exactly halfway. Also, do not forget to completely release the air from the water level, otherwise it will not work out exactly.

Your assistant should put one of the flasks to the drawn cross, and you need to do the same, putting the second one to the corner of the wall. The boundary of the water in the flask is caught by those who stand at the cross, while you stand motionless. The line is fixed with a pencil. Thus, marks are made around the perimeter of the entire kitchen.

Water level check

Where do you need tags?

Choose the longest wall and put 2 marks there (the kitchen can be either rectangular or polygonal).
On the remaining 3 walls, one mark will be enough.

If your future plasterboard ceiling will be illuminated in the kitchen, namely with built-in lights, then you should not subtract 5 cm, but, for example, 10 cm.

False ceiling lamp

Stage of correct setting of guides

Now we move all the marks along the perimeter of the kitchen up by the value that we received in the calculations in the previous step. It is necessary to measure the wall on which you have 2 marks (the longest wall of the kitchen). The guide must be cut to length.

The guide is nailed with dowels in the areas where the marks are drawn. Below you need to bring a 2-meter level and make sure that there is no gap left anywhere.

Advice to everyone who has at least one wall in the kitchen up to 3 meters long - buy guides from 4 meters and above in stores.

We also place guides around the entire inner perimeter of the kitchen, paying attention to all the marks on the walls, as well as to the guides themselves on adjacent walls.

Double-check the curvature several times so as not to spoil your future ceiling.

Exposed guides

Frame creation stage

We find the most even angle (by eye), which we will further focus on in order to set new marks already for profiles.

Every 60 centimeters we put designations on the walls (60, then 120, then 18, then 240). We repeat the same steps on the other side. Next, you need to measure the profile, cut it off and insert it into the guides at the points where there are marks.

We take measurements

Then we screw on the brackets so that the whole structure holds firmly. We proceed to the exposure of the frame itself. You will again need a second assistant: someone will maintain the level, and the other participant will carry out the bonding of profiles. This process is shown in detail in this video.

One participant will have to set the level from one end, and the second from the opposite. Then the level must be turned across and pressed one of the edges of the level to the guide of the other edge. (The holes for the dowels should be drilled at a distance of 35-40 cm). So, the main profiles are inserted into all guides. So, you can move on to the next step.

Profile fixing

The stage of attaching drywall to the ceiling surface

To beautifully and correctly install a plasterboard suspended ceiling in the kitchen, you need to study the following photos with step-by-step instructions for attaching the structure to the surface of the ceiling itself.

We fasten the sheet to the ceiling with one edge on the fixed profile, and snap the second

Now the drywall sheet can be moved to the right or left

After fixing the sheet on the screws, the supporting profiles are removed and used for other sheets

To attach the gypsum board material to the created frame on the ceiling, we divide the technology into the following steps:

We cut sheets with a hacksaw. A hacksaw should be chosen with fine teeth to make it more convenient to cut (a clerical knife is also suitable). We cut the material 120 by 250 or 120 by 125 centimeters. Make sure all joints are even. You need to cut on the most even horizontal, it is best to choose a large table or floor.
We cut with a hacksaw
Processing with a planer. We use a planer to process the resulting edge. If you end up with edges that remain and protrude slightly, remove them with a sharp knife.
We process with a planer
We cut holes for lamps or lamps, if necessary according to the plan. Here it is necessary to clearly measure everything in advance and place it first on the plan, and then mark the location on the drywall.
Cutting holes for lights
Directly the surface finish itself with drywall sheets. There are two ways to attach the material to the ceiling: transversely or longitudinally. Transversely - we place the sheets strictly perpendicular to the metal profiles, longitudinally - we place them parallel to the supporting profiles. Self-tapping screws must be installed at a distance of 10 to 15 mm, retreating from the edge of the drywall sheets. The screws are screwed in such a way that they do not protrude on the front side of the ceiling (we follow the screwing depth). The screws must be screwed into the metal frame by 10 mm. The location and length of the screws will be determined by the total thickness of the entire ceiling sheathing. The distance at which the screws are located from each other is 150 mm. Make sure that the cardboard where the screws are attached is in good condition and not damaged. So the mount will be secure. If there is a gap between the ceiling and the walls, it is better to close it with a special corner instead of putty. Another important point: 2 days before the installation work, the material must lie in the room where it will be subsequently installed.
Fasten the sheets to the ceiling
We putty the joints. Before puttying, you need to wait about 2 days. We carefully examine all the flaws and joints, eliminate them. We clean all surfaces from the remaining dust and unnecessary details, a reinforcing tape will help here. Putty must be carefully pressed with a spatula, in no case leaving air bubbles. We are waiting for the final drying and go through the desired areas with sandpaper. If necessary, apply a second layer of putty to level the surface, also wait until it dries completely and work with sandpaper.
Putty joints

How to install lamps on the ceiling, shown in this video.

Now you can easily build a false ceiling in the kitchen with your own hands, following our instructions in the article, step-by-step photos and videos. You will need patience and care. After puttying, you can also, if you wish, paint your ceiling in the kitchen so that a single style is maintained throughout the apartment. But usually a suspended ceiling looks beautiful and elegant even without paint.

The choice of materials for finishing the kitchen is always not easy, as something is constantly cooked in the room, steam is released, fat and oil fly in different directions. Therefore, in order not to become a constant hostage to cleaning, materials are chosen for the kitchen that are subsequently easy to clean. Is drywall such a material, will it be appropriate in the kitchen? What are its advantages and disadvantages? We will analyze these questions below.

One of the undoubted advantages of a false ceiling in the kitchen is the ability to hide flaws. If there are defects on your ceiling, then the false ceiling will completely hide them. Also, such a coating does not require any surface preparation. There is no need to putty or prime the ceiling.

Drywall does not deform, unlike plastic, so you can place lighting fixtures as you like without fear of damaging the material. At the same time, it is cheap, even with the purchase of other materials needed for fixing, you do not have to spend a lot of money. In addition, its installation is very easy, which saves on hiring specialists. Anyone who has at least some idea of \u200b\u200brepair work can install a drywall construction with their own hands.

The appearance of drywall structures is diverse. Single-level, multi-level. The choice is so wide that it will definitely bring any project to life. If you want to make waves on the ceiling, circles, squares, steps, or somehow unusually arrange a light zone with various light elements, all this allows you to make drywall.

All of the above relate to the advantages of a plasterboard ceiling, but it also has disadvantages.

Drywall does not tolerate moisture. In other rooms this may not have played a role, but in the kitchen, where steam rises and the possibility of flooding is very likely to be fatal. Also, frequent cleaning seems to be very doubtful, it is impossible to wipe with a damp cloth, which complicates the cleaning process. You can use waterproof plasterboards, but this will raise the overall cost in price. Also, to repel moisture, drywall is coated with moisture-resistant paint.

Of course, if you install the right ventilation system in the kitchen, it will save your ceilings. There should be a hood above the stove and then drywall will be an excellent choice for finishing the ceiling in the kitchen.

How to make a plasterboard ceiling with your own hands

Plasterboard ceilings in the kitchen can be done independently, without calling specialists.

Required tools:

Level
Roulette
Perforator
screwdriver
square
Pencil
Hacksaw
Spatula and putty
Reinforcing tape

Lighting. They must be purchased before installing the ceiling.

Based on the type of lighting, decide how many centimeters lower the suspended ceiling will be from the main one. If you have spotlights, then you need to retreat more than 8 cm, if not, then 5 cm will do.

An important stage of work is markup. Draw a horizontal line across the entire area of the room. It is required to measure all 4 corners and the center of the room. The lowest angle will be the starting point. Mark the desired distance from the floor and draw a horizontal line to all corners according to the level. If you have a laser level on hand, it is better to do this job with it.

Drill holes for dowels along the lines drawn with a drill, a distance of about 35 cm. Screw the profiles. After fixing the profiles, it's time for the hangers. They are fixed on the ceiling at a distance of 65 cm. For the convenience of work, pre-mark the markings. The main profiles are inserted into the guides and fixed on the hangers. After that, they need to be bent.

Secondary profiles are attached to the main profiles at the joints of drywall sheets. Now you have a frame for sheets. Next up is the wiring. It is necessary to lay all the wires in the grooves. Route the wires to the location of the lamps. Next up is the wiring. It is necessary to lay all the wires in the grooves. Route the wires to the location of the lamps.

After all of the above, the turn of attaching drywall sheets to the frame. This process is not easy, it takes place in several stages. Before installation, you need to determine how many sheets you need. Usually there are more sheets than the perimeter of the room, so they need to be cut off. Cut the sheets with a hacksaw or utility knife, the ends must fit exactly into the frame. The cardboard is cut on both sides, and then gently breaks if the knife does not pass through. The cutting edge must be even. Trim if necessary with a knife.

Now you need to cut holes for the lamp, lamps, sockets. Place the lighting devices on the sheet and carefully cut a hole with a hacksaw.

Sheets are attached to the frame either longitudinally or across. If you decide to mount across, then the sheets must be placed perpendicular to the supporting profiles. If longitudinal, then in parallel with the supporting profiles. In the presence of additional laths, the installation of sheets is carried out from the corner, if not, then from the end or center. Install the self-tapping screws 10 mm from the edge of the sheet, the screws on the front side perpendicular to them. The screws must not go through the cardboard. Do not install sheets close to the wall, they must remain on the profile. When attaching, it is better to work in pairs: one holds, the other fastens. The sheets are adjusted to each other and fastened to the frame with screws.

It is best to wait a couple of days before puttingty. So you can find out if there are any defects. Putty can be processed joints or the entire ceiling. It depends on the quality of the putty itself, it is better to apply a cheap one around the entire perimeter and paint with a roller. Before work, prepare the seams by first cleaning them with a knife. Apply a small layer of putty, then lay the reinforcing tape inside and apply another layer of putty. After that, it is worth waiting a couple of days until the seams are completely dry. Remove all irregularities with sandpaper. After drying, paint the surface.

If you decide to make a multi-level ceiling, then you do not need to paint at this stage. On a piece of paper, draw a drawing of the future curly frame and mark the markings on the ceiling. The width of the second level is equal to the width of the first. Fix the guide profile, attach the main guides to it. The profile needs to be bent along the radius of the required sections. Route the wires for the lamps to the right places. Saw the sheet of the required shape and attach to the profile, as before on the first level. Then it remains only to close the resulting box with a sheet of drywall and install the lamps. Putty the box, wait a couple of days and paint. Your ceiling is ready.

Ceiling design in the interior of the kitchen

Which plasterboard ceiling to choose in the kitchen depends only on your imagination. There are general types of design that can be changed depending on your desires.

The most common option is just a flat single-level ceiling. It hides all the flaws and occupies a minimum of height.

A little more difficult to install, but multi-level ceilings look more beautiful. The second level can be made curved, straight, wavy. But it is better not to do it if you have a low kitchen. Multi-level ceilings will eat up a lot more space.

Figured ceiling. Very difficult to install, it is better not to do it yourself. This design can be decorated with a central decorative element.

Frame ceiling. One of the simplest options for a multi-level ceiling. Consists of several steps. Typically, this design is complemented by several lighting zones.

Diagonal ceiling. The main design element of such a ceiling are various wavy or straight designs.

zone ceiling. Such a ceiling allows you to divide the room into several zones. It is very convenient when decorating the kitchen, you can separate the dining area and the cooking area.

Plasterboard ceilings often go hand in hand with various lighting layout designs. You can create a spectacular design with a chandelier as the centerpiece.

There is another option without accents, just distribute different lamps or LED strips along the radius of the ceiling, creating different lighting. This option is convenient for creating different zones and degrees of illumination.