Even the smallest and insignificant element plays an important role in the interior of each apartment. Only one unsuitable detail and the interior is ruined. That is why the choice must be approached carefully and very responsibly. Let's talk in this article about such interior decoration as lamps. It is not enough to hang only a light bulb; you also need to decorate it somehow. This can be done with a lampshade. Shop variations of lampshades can not always please, and rarely among them you can choose the model that will harmoniously blend into our interior. We do not always choose new lamp with a beautiful design, sometimes the old one no longer attracts us, has gone out of fashion or absolutely does not fit into new interior... All these factors push us to create DIY lampshade (photo).
It would seem that decorating a lampshade on your own is a rather complicated procedure, but in fact, everything is very simple. Allocate some free time, and we will show you several options for creating a beautiful lampshade. Do DIY lamp shade can be from any materials that come across at your fingertips. It can be any fabric you like, and ribbons, and beads and many other materials that, in your opinion, are suitable for decorating an original lampshade.
DIY lampshade for a floor lamp everyone can do it. The main thing is not to set yourself too serious tasks. If you have never encountered homemade products and it is difficult to imagine how you will cope with the task at hand, then it is better not to risk it, but to choose for yourself a simpler version of the lampshade design.
A beautifully selected material, color and shape for the future lampshade will create a truly spectacular element of the interior. A neat and original floor lamp or other lamp can perfectly complement the design of a hall or other space.
It is not always convenient to make a lampshade from scratch; it is much easier to transform an existing one. In particular, such a solution is much easier for those who first decided to make with my own hands the decor of the apartment and add a fresh touch. To create a new design for central lighting or a floor lamp, you need to take an existing lampshade or purchase the simplest one in the store inexpensive option... Each of the proposed options is good in its own way. In the first case, the former lampshade does not always have an ideal condition, which, accordingly, can add to the problems in its design. In the second case, you will receive a whole new material for the manifestation of your imagination, but at the same time you will incur small losses.
But in any case, making a new one from a finished lampshade will not be as difficult as decorating a new one. What can be done from an old floor lamp? Having cut out, for example, parts from cardboard or plywood, they can be attached to the existing lampshade, painted in one color or covered with fabric. We will receive a lampshade with new shapes. This solution is often used when parents are trying to create fabulous design... Just imagine how great the boy's room will look, decorated in a space style with elements of unearthly planets, and a lamp made in the form of a space creature or a small satellite. But it is not difficult to make such a lampshade for a lamp in the above way. Imagine a little, involve your child in the process, who is always full of brilliant ideas that you would not even think about. A little time and effort and you will succeed original solution for central lighting of a children's room. All guests who come to visit you will be delighted with the solution they saw.
If you have a solid-colored lampshade, there will be no problems with its design at all. Solid colors are ideal material for homemade registration, because here you can embody any wishes and ideas. For example, get original lampshade you can use appliqués, embroidery and even ordinary stickers that can be found in many stores.
DIY lampshade - master class
We offer you an interesting DIY lampshade (master class), in which we will tell you how to get a work of art from an ordinary light lampshade. In the afternoon, our floor lamp will represent regular element interior, and at night it will turn into a wonderful decoration.
Our master class will be devoted to creating a lampshade in the form of a night city. To do this, we need directly the lampshade itself in light colors, yellow, orange or light pink shades are desirable. They will most of all resemble night lighting when the lamp is on. We take black fabric and cut out our model of the night city from it. It can be trees, buildings and even cars. Using PVA glue or any other, we glue our applications on inner side of our lampshade so that no wrinkles form. You can sew a black ribbon on the bottom. Please note that it is better to stitch with a white thread or a thin ribbon. This will create the effect of a city road.
In daylight, our app will not be visible. And when the light is on, the landscapes of the night city with houses and trees bathing in the moonlight will open in front of us.
Choosing a colored floor lamp with bright ornaments and patterns for decoration, it is enough to slightly decorate it by adding pendants with beads bright colors... It is possible to decorate with satin thin ribbons for a more striking effect. Such a lamp will fit perfectly into. Thanks to such a small additional interior, she will be able to feel like a real princess living in a fabulous room with a cute interior.
How to make a lampshade with your own hands from scratch?
If you are interested in a question, how to make a lampshade with your own hands from scratch? Then you can simply purchase a few plastic folders and wire. Cut out from folders necessary details for the frame, and use a wire to connect them together. This solution will allow you to create a completely new, original and unique lampshade.
Before embarking on any design of a lampshade, you need to take into account all those colors that are found in the room for which it will be intended. As you understand, the lamp should harmoniously fit into the interior of the room, match the texture and color scheme space. In addition, observe the safety measures. That is, if you have a baby who is still too small and strives to grab onto everything that comes his way, then try to arrange a more restrained version of a floor lamp or lamp to which the baby will not reach out. The fact is that more than once we have encountered situations when children pulled the pendants on floor lamps and overturned it on themselves, while receiving various injuries. Let's not talk about the bad. Just try to take into account all factors besides beauty.
What materials are used most often to create a lampshade? The most common option is textiles. It is good not only for its flexibility and ease of use. Its popularity is also deserved thanks to the chic variation of colors, which allows you to design absolutely any floor lamp that is perfect for any interior, let it be minimalism or Ethno style. Among all the variety of fabrics, it is best to choose thick cotton or felt, which will quickly gain its popularity among needlewomen. Felt is an excellent material for creating a lampshade. It allows you to create a variety of multi-layered compositions, for example, DIY lampshade with butterflies.
If you do not want to tidy up your old lampshade for central lighting, we offer you a very interesting option doing it from scratch. This option does not take much time and effort, it is good for any interior, especially for.
To create a new lampshade for the ceiling lamp, we need a ball, glue and thick threads. Performed DIY thread lampshade very simple. We inflate the balloon. Dip the threads in glue and wrap the ball in random order. Just don't overdo it. There should not be too many threads, there should be enough space between them in order to let light through. In addition, it is worth leaving a small space without threads on one side, this will be the bottom of our lamp, through which light will flow. The creation process is almost ready, just wait a little until the glue dries, after which you can blow off the ball.
Our threads will remain in the form and shape in which they were at the time of drying. If desired, our lampshade can be painted with paints in order to give it brightness and originality, while combining several colors. Now we just have to hang our lamp on the lamp. As you have seen, there is nothing difficult about this. But the interior will receive a new note of originality.
To decorate an old lampshade, you can use satin ribbons and even scraps of fabric. They can be sewn along the diameter of the canvas, thereby creating horizontal stripes. For example, you can make a combination of several colors. For example, let our lamp be light Pink colour, and we will insert stripes in burgundy colors with bright small flowers. A combination of turquoise and brown will not look bad. Such a lampshade is suitable for interior decoration of the hallway, and one of the rooms. A cute floor lamp can be put in the nursery, and more bright solution leave for the guests to see in the living room.
V Lately people strive to create new and original elements for interior decoration with their own hands. Therefore, in their works they use absolutely unpredictable elements, among which one can note kitchen utensils, artificial leaves, bamboo and others. interesting materials... Lampshades look unusual, the frame for which is made of transparent plastic, and pasted over from the inside with old slides, photographs or decorative stones.
As you have noticed, making a new floor lamp or chandelier is not as difficult as it might seem at first glance. Everything is quite simple if imagination works and there are many brilliant ideas. You can make an original element of the interior from any available means, applying a little new look to their design. Imagine, experiment and you will be able to create a bright interior full of unusual and unique details of the overall composition.
Decorating lamps or creating lampshades is not only interesting, but also useful. You can get the perfect item that fully matches your home interior, and at the same time it is great to save money. You just need to buy the simplest lamp and make it exclusive.
Cozy home- it is not only the right furniture, but the right lighting. Thanks to the beautiful lampshade, the interior will become exclusive, and the room will become warmer and more comfortable.
If there is a desire to make a rearrangement in the room, then together with it you need to update the chandelier and floor lamp. You can just buy a new product, or you can change the textiles on the lampshade with your own hands.
A detailed workshop on making a lampshade will help you create a unique, decorative item interior. After reviewing all possible ways manufacturing, you can choose for yourself exactly the option that will be ideal for you.
Material for making lampshade
Having a ready-made frame, you can start choosing the material for the lampshade. This could be:
- the cloth;
- plastic;
- Knitting;
- leg-split;
- beads;
- paper.
Fit and waste materials which are usually thrown out:
- cardboard containers for eggs;
- newspapers;
- gift wrapping;
- old bicycle or car parts, etc.
When choosing a material for a lampshade, you need to remember about its color... It should be a perfect match for the style created. In addition, you need pay attention to the lighting of the room... If the room is poorly lit during the day, and it is semi-dark, then a lamp made of transparent or light material is more suitable for it. For a light room, you can choose a dense and dark material for the lamp - but this will depend on the general decoration of the room.
As you know, red and yellow add warmth and light to the room; therefore, to make the room warmer, you need to install a lamp with a yellow or red lampshade in it. If the room is located on the south side, and the sun heats its walls all day long, then the lampshade for the lamp installed in this room can be blue or green.
Gallery: DIY lampshade (25 photos)
How to make a frame for a lampshade with your own hands
The frame is a stable base, mainly consisting of two circles. Circles can be either different or of the same diameter; they are interconnected by vertical partitions. The length of the partition is the height of the lampshade.
To make cylindrical frame, you need to make two circles of the same diameter. If you need to make a classic frame for a luminaire, then the lower circle in it should be of a larger diameter than the upper one.
Rounded shape can be obtained if the partitions are not straight, but slightly curved. The classic frame will only benefit from this.
The shape of the frame will be interesting if there is a ring at the base and not at the top. It turns out that the concave partitions will be connected at the top at one point, and below they will be fixed at the same distance from each other.
For making a frame, it is best suited wire, since it can perfectly keep its shape, moreover, it is non-flammable. Suitable for work copper, aluminum or steel wire with a diameter of 2 mm.
DIY lamp types
After the renovation in the room, I really want to update not only the furniture, but also the accessories. These include light fixtures, chandeliers, floor lamps and table lamps. It is desirable that such a piece of furniture be an exclusive detail; it can be installed in a room on a coffee table or in a bedroom on a bedside table or on a dresser.
To get an exclusive model of a chandelier, you need to visit exhibitions handicrafts... If the model you like costs a lot of money, then you shouldn't be upset. You just need to apply your imagination, "turn on" your hands and head - then you can make an exclusive model with your own hands. Since a chandelier usually has not one, but several identical shades, it will take more time to make them than for one.
Modern lampshades can have very different shapes, decorate them to your liking. Preference is given to items decorated with colored beads.
If you want to upgrade your table lamp shade, then ideal option there will be cardboard. It must be strong, but thin, then the product will be completely different from others. The work is performed in the following sequence:
- 4 identical frames must be cut out of cardboard, similar to those into which photographs are inserted.
- A piece of fabric needs to be glued to each item on the back.
- In each product, on the side, you need to make holes at the same distance. A needle or an awl is suitable for this. With the help of laces, the details are sewn together, and you get a flashlight.
This method of creating a new lampshade is considered the simplest, besides, the product is very lightweight. Depending on the situation in the room, the color of the fabric with cardboard is also chosen. The decor of such a product can be anything.
Thread lampshade
A ball made of threads looks very impressive in the interior. To make it, you need patience and perseverance, and besides them:
- thread or twine;
- round inflatable ball;
- PVA glue;
- scissors.
The desktop needs to be covered with oilcloth or unnecessary newspapers, and only after that start to work.
- The balloon needs to be inflated and tied with a thread.
- We wrap the ball with the chosen thread. You can try different patterns, or you can just wind the thread around the ball without changing direction.
- The winding must be tight.
- Having reached required density, the thread can be cut.
- We carefully saturate the entire winding with glue. The better the thread is impregnated with glue, the stronger the lampshade will turn out after drying.
- When the glue is completely dry, the ball can be pierced with a needle and pulled out. Where the tail of the ball was, you need to cut a hole for the cartridge.
If, for some reason, you do not like the color of the resulting product, you can repaint it in another, using paint in spray cans.
The finished twine lampshade can be varnished, decorate with beads or beads.
Lampshade made of paper
To prevent the paper from heating up and catching fire when the light is on, the lampshade should be quite large. Under such a lampshade, it is better to buy an economical light bulb that heats up less.
Many ideas for making a lamp shade for a paper floor lamp can be found on the Internet. Various colors are used, cut out different figures... The result is a unique creation that can decorate any room.
DIY fabric lampshade
To work you will need:
- a piece of new fabric;
- scissors;
- tape measure or centimeter;
- thread and needle;
- pins;
- textile glue or stapler.
Next, you need to choose an object for restoration: it can be an old table lamp or any other lamp that has been “living” with my grandmother for a long time. Think it over in detail appearance, which should be suitable for the already created interior of the room.
For example, you can make a new lamp shade plaid fabric... It is sewn onto a frame of a certain size. If the old lamp has a frame, then consider that half of the work has already been done. And if the lamp frame is missing, then this is not a disaster - you can do it yourself, there is nothing complicated about it. The checkered fabric lampshade is perfect for the country style.
How to make a lampshade for a floor lamp? A master class on making it can be found on the Internet.
To sew a lampshade onto a cylinder-shaped frame, you need to measure its circumference and height. On the fabric, make a pattern according to the dimensions obtained, then cut it out like a template.
For the cone, you need to make a blank from whatman paper. Try on what you cut out, cut off all unnecessary ones. If something does not work out, you need to redo it.
The fabric for the lampshade is attached to the cone, while placing the pattern or ornament correctly. To get a flat surface, the fabric must be stretched.
The fabric for the lampshade can be cotton or linen.
Lampshade for a lamp in a children's room
When the child is small, the lamp in the nursery is very relevant. You can always buy such a product, but to make it, you need not only time, but also imagination. It is advisable to make a lampshade for a lamp together with a child in order to develop his imagination. Since the plafond will stand in the children's room, you need to completely trust the child's taste.
Naturally, the child will want to see his favorite cartoon characters at the night light. You will need to work hard, and with it cut them out of paper or buy ready-made translations. You need to use the idea with a print on cotton.
For bedroom
If the bedroom is purely female, then a model would be an ideal option for a lampshade, tied with thread... The proposed version is knitted of white iris-type threads, which are used to knit napkins to decorate shelves or tables. You can choose a pattern for thin knitting needles, if it makes it easier for you.
For a classic frame, the napkin is not knitted from 3 air loops. The chain length should be slightly longer than the top ring of the frame. Then the lampshade is knitted in a circle, according to the pattern, like a napkin. It is possible that the height of the product will be greater than the length of the napkin, then it will be necessary to knit several rows more.
The finished product must be washed and be sure to starch so that after drying it has a certain shape.
White knitted lampshade can decorate with colored beads or colored ribbons- It all depends on your imagination.
In a creative experiment, the main thing is to choose the right shade of small decorative elements. When the style, color scheme and shape are correctly selected, even the simplest hand-made thing will look exquisite.
To make a DIY lampshade look neater and more beautiful, you need to paint a new dense wire frame first, and then carefully wrap it with cotton tape. Then the fabric of the stitched lampshade will not be damaged.
Conclusion
It is very easy to renovate a lamp, the shade of which, over time, has lost its original appearance. After reviewing the relevant information and purchasing all necessary materials, you can make a unique thing that will decorate the interior of your home.
Be creative to get a designer, exclusive lampshade for your lamp.
Those who possess creative imagination and love in free time decorating the house with hand-made things, have several advantages over the rest.
- What is the advantage
- From fabric
- From paper
- From threads
- Other solutions
What is the advantage
- The opportunity to save money. A unique author's product will be obtained free of charge or you will need to purchase a small amount of materials, which is several times less than the cost of a finished product purchased in a store.
- A way to express your individuality, to invent and make extraordinary, unlike typical, interior items, for example, lampshades for chandeliers, with your own hands;
- Working together with young children will help attract them to work, spend fruitful weekends together, and show creativity.
- Putting my soul into my creation and positive energy, you can make a wonderful gift to your family, especially mothers and grandmothers will be happy with it, as it will become a pleasant reminder of your beloved children or grandchildren.
From fabric
Decorate the chandelier with the remainder beautiful fabric even those who have not learned the rules of sewing and do not have a home will be able to sewing machine... It is good if there is the same material in the house as on the upholstery of upholstered furniture or curtains. Then the lamp will become part of the overall interior decoration.
A bright plafond will decorate the kitchen, country house, children's room. Its manufacturing technology is very simple. Thanks to her, he will have a neat appearance both from the outside and from the seamy side of the product. For work, you need to stock up on a suitable cloth, scissors, double-sided tape, thread and a needle.
- Remove the old covering from the unnecessary chandelier, leaving the frame.
- Prepare even strips from the fabric of the future product. To do this, at regular intervals, approximately 3 - 5 cm along the warp threads, make cuts and quick movements tear the fabric.
- Then iron the strips and cut off the excess threads, carefully decorating the edges. The length of the strips can be different, the longer the better, because fewer connections are required.
- Starting the process of forming the plafond, one of the strips should be fixed with a needle and thread on the upper ring of the frame.
- Gradually wind the fixed strip around the upper and lower rings of the frame, overlapping each subsequent layer with the previous one. When the first strip is over, sew the next one to it from the wrong side and continue.
- In order for the luminaire to have a finished look, the lower and upper edges of the plafond should be decorated. To do this, cut a 14 cm wide strip from a contrasting fabric.
- Tuck one edge 2 cm and iron.
Glue Double-sided tape from the inside.
- Then glue the finishing tape to the shade, gradually removing protective layer from the tape, at the same time wrapping it on the inside.
- Similarly to the upper one, trim the lower edge of the plafond. Cut off the excess part of the material.
So with this master class it is a snap to update your old chandelier.
From paper
Another way to show your imagination and at the same time usefully spend your free time is the opportunity to make a shade of paper.
To do this, you need to cut strips of white, colored paper, thin cardboard or plain newspaper. Then arrange them into a product, laying the strips at random, winding them symmetrically relative to the central part of the chandelier, as you can see in the photo.
Periodically, in places of contact, apply glue and form a stable structure.
From threads
Quite simple to manufacture and effective in working order is a shade made of threads.
How to update a table lamp with your own hands: 37 ideas for a lampshade
The proposed instruction will tell you how to make an original lamp from scraps of colored yarn.
- For work, prepare a rubber ball according to the desired size of the lamp, scissors, glue, threads.
- Inflate the ball and wind the threads, crossing them in an arbitrary direction, leaving free gaps.
- When finished, apply transparent glue to the surface.
- Without waiting for complete drying, carefully cut a hole, which will later be necessary for screwing in the lamp, deflate and remove the ball.
Other solutions
People with out-of-the-box thinking creative imagination they will not throw away unnecessary things, from which it is quite possible to build an original lamp. For instance,
- from a plastic bottle and disposable spoons;
- from metal gears and parts;
A unique, original decoration of the room and the surprise of guests from an exclusive plafond will be provided.
See also: DIY wood chandelier, Which lamps are better for stretch ceilings
A minimum of material and a modest skill in tinkering is all that is required to give a new look to an old table lamp.
The shade of your favorite lamp has faded and is no longer pleasing to the eyes!
Replace it with a new one.
Ideas and master classes for making lampshades with your own hands for a floor lamp and a table lamp
And making it is not difficult at all, covering the fittings of the old lampshade with a fabric with a pattern you like or a piece of wallpaper left after repair.
The use of self-adhesive paper (with a protective film) to make the lampshade simplifies the "production" process. Such paper is sold both in rolls and in the form of separate sheets.
If self-adhesive paper is not available, self-adhesive transparent film can be dispensed with. It is especially effective for gluing the covering of wallpaper lampshades.
To make a new lampshade, you will need: self-adhesive paper with a protective film, a steel ruler, covering material, tape for trimming the edges, duct tape, universal glue, frame rings, clothespins.
How to make a lampshade pattern
The sizes of the lampshade are determined by the diameters of the large and small rings of the frame. The marking of the pattern for the covering is done as follows. First, a segment AB is drawn on a sheet of plain paper of a suitable format, the length of which is equal to the diameter of the lower ring. A perpendicular is restored from the center Z of this segment and point Y is marked on it - the height of the future lampshade. She is chosen at will. Then, through point Y, a segment CD is drawn parallel to AB, equal to the diameter of the upper ring.
The wrap pattern should be in the shape of a ring segment. To find its center, the segments AC and BD are extended. The point of their intersection will be the desired center X. From it, through the points A and C, the arcs of concentric circles are drawn with a compass.
The lines EG and HF that delimit a segment are the butted edges of the pattern. Their position is found as follows: the length of the segment AB is divided by the length of the segment AX, the quotient of the division is multiplied by 180 degrees. The resulting angle is plotted from the X center, halved relative to the XZ axis.
How to assemble a lampshade
Depending on the design of the lamp, the lampshade is attached to it by the lower or upper ring. For this, the corresponding lamp shade ring is connected by knitting needles with a sleeve that is put on the base of the cartridge.
Our lampshade does not have parts that hold the rings together and determine their relative position. This function is performed by the wrapping. Therefore, the rings must be attached exactly to its edges parallel to each other. The slightest inaccuracy - and the lampshade will warp. To prevent this from happening, before you finally assemble the lampshade, the rings must be carefully tried on.
 |
1. Wrap the ring with adhesive tape, sticky side outward, so that its surface is as even and smooth as possible without wrinkles. |
 |
2. Delete protective film with self-adhesive paper and stick it onto the fabric. Smooth the fabric to the paper. |
 |
3. Place the pattern on the fabric, align the edge and cut out the shade shade blank along the contours. |
 |
4. Roll the workpiece into the lampshade, insert and fasten the lower (larger) ring with clothespins. Glue the edges of the workpiece from the inside. |
 |
5. Stick on the bottom ring and squeeze the adhesive joint with clothespins until the adhesive dries. The same is done with the small (upper) ring. |
 |
In addition, fasten the glue seam from the inside with adhesive tape. The upper and lower edges of the lampshade can be decorated with braid. |
Next page: A hot-water bottle for a kettle ... Doll "Rainbow" with your own hands Previous page: Piggy bank "Little House" with your own hands
Today I will show you how you can breathe into old things new life... It's about a Soviet floor lamp. In truth, even in its best years, it was a completely ordinary and unremarkable lighting fixture.
How to restore an old floor lamp with your own hands
Of course, you could just cover it with white paint, but we are not looking for easy ways. We will radically change the design of the item. So, to restore the floor lamp we need:
1.Gold acrylic paint in a spray can;
2. polymer glue (I used DRAGON);
3. brush;
4. satin and gold braid (they can be purchased in stores specializing in the sale of fabrics and sewing accessories);
5. threads in the color of satin and a needle;
6.Gold acrylic paint for painting on fabric. They are made on the basis of an aqueous acrylic dispersion, so they do not stink either during painting or after drying. I recommend using Javana (Germany) or Decola (St. Petersburg) paints. Read the instructions carefully and follow all safety precautions during operation.
As a result, I spent $ 10 on materials for the restoration of the floor lamp. As for me, it is much cheaper than buying a new one.
With a leg from a floor lamp, everything is simple. We spray paint from a spray can in 2-3 layers.
How to make a DIY lampshade from fabric
In order for the paint to dry well and not drip down, take a break before applying each new layer for 15-20 minutes. Do not bring the can to the base of the floor lamp closer than 30 cm, otherwise the paint will lie unevenly. It is better to do this on the street or balcony, because the smell from the paint until it dries up will be sharp and unpleasant.
Then everything is a little more complicated. We lay out the atlas on the floor, put a lampshade on it in the center sideways. Carefully roll it, first in one direction, then in the other direction, at the same time we outline the contour of the future product. I did it with chalk because the fabric was dark, you can use a pencil. Cut out the resulting shape, leaving 2 cm on each side for allowances.
Then we proceed to painting. The pattern can also be pre-applied with a pencil or chalk. It is unlikely that it will be possible to completely block the color and texture of the fabric from the first time, so you will most likely have to apply the paint in 2 layers.
Well final stage floor lamp restoration - product assembly. A new fabric lampshade must be sewn with a seam forward with a needle and put on the old base, it is better to fix it from above and below with polymer glue. We carefully sew the braid on top. We attach the lampshade to the base. That's it, our restored floor lamp is ready.
You can skip reading the entries and leave a comment. Posting links is prohibited.
How to make a lampshade with your own hands and a frame for it - on a floor lamp, beautiful from paper + interesting video
- How to make beautiful lampshade do it yourself from paper
- How to make a lampshade for a floor lamp with your own hands
- What can you make a lampshade
- How to make a frame for a lampshade with your own hands
Fortunately, you don't have to buy a lamp just because of the beautiful lampshade, as you can do it yourself.
Yes, such that it will cost less than buying a floor lamp, and at the same time it will be much more beautiful. And now Infosborka.ru will teach you how.
How to make a beautiful DIY lampshade out of paper, which can be used as a lamp
You need
- Long stem glass
- Candle
- Rope - can be twisted from thread
- Lace with tassel at the end
- Decorative ribbon
- Scotch
- Scissors
- Transparent paper with decorative patterns
- A little sand
Manufacturing process:
1. Make a template from plain A4 paper.
2. Place the template on transparent decorative paper with a design and trace around it with a pencil. Then cut out the resulting image.
3. Glue the decorative tape to the edge of the paper.
4. Tape the rope with a tassel at the end of the back of the paper.
5. Glue the side ends of the paper together.
6. Tie a string to the stem of the glass.
7. Wrap it around the leg as shown in the picture below.
8. Pour sand into the glass, put a candle on top and light it.
9. Put on the made dome on the glass.
And so a beautiful lamp shade with a lamp turned out.
How to make a lampshade for a floor lamp with your own hands
You need
- Patterned paper
- Decorative paper
- An awl with which you will poke holes on the future lampshade
- Glue and brush
- Scotch
- Tape in the color of decorative paper
- Clamps
- Lampshade frame
In our case, the frame for the lampshade consists of two parts:
Manufacturing process
1. Tape the patterned paper to the wrong side of the decorative paper.
2. Make holes with an awl along the contour of the drawing.
Needlework for home
As a result, it turns out like this:
3. Wrap the paper around the first part of the frame.
4. Mark with a pencil the line along which you will glue the decorative paper.
5. Glue the paper with glue.
6. You smear lower part the resulting cylinder with glue and glue the second part of the frame to it.
To make it stick, press it down with clamps.
In the same way, glue the first part of the frame to the top of the lampshade.
9. Glue the tape to the upper part of the lampshade. This is done like this:
- smear a small piece (five centimeters)
- glue and clamp with clamps
- then coat with glue and glue the next piece, etc., until you glue the entire tape
10. Bend the tape so that it covers the frame, and glue it.
As a result, you will get such a lampshade for a floor lamp:
Using this technology, you can make any drawing.
What can you make a lampshade
- Beaded lampshade
- Lampshade from plastic bottles
- Wicker lampshade in Provence style
- Organza or thread lampshade - you can make a hanging version
We will tell you how to make them in the following materials, but now I would like to tell you about ...
How to make a frame for a lampshade with your own hands
You need
- Welded wire - 3 lengths are selected, focusing on the height of the lampshade. In this case, do not forget to add 3-4 cm for the connection.
- The upper part is from a jar of vitamins, the neck of which will go right into the ceiling.
- Spring for return of the cord from the vacuum cleaner.
- Soldering iron.
- An object with which you can pierce holes (awl, nail, etc.)
- Pliers
Manufacturing process
- Make a circle of the required diameter from the return spring of the cord from the vacuum cleaner. Solder the ends.
- Make three holes in the neck of the vitamin jar and in the circle made. The holes on each item should be approximately the same distance from each other.
- Push the welded wires into the holes and bend their ends with pliers so that they do not come off.
In the end, this is what you should get:
To relax a little after the learned information, here is a video for you on how to make a candle from an incandescent light bulb:
Don't switch. Soon there will be a continuation of the theme of a lampshade with your own hands. Using these links, you can switch to the second and third parts of the article.
Nowadays, many people strive to ensure that an atmosphere of comfort and beauty is always present in their home. As a rule, we do this using different ideas helping us to decorate the house in a certain style. We also try to decorate our interior. various elements decor, bringing some mystery and originality into it.
In this article, we will focus on such an important interior detail as a do-it-yourself lampshade. If your favorite lampshade is completely worn out, you can always decorate it, thereby breathing new life into it. You can also make it yourself for a floor lamp, night lamp, ceiling or floor light source.
Advantages
The first lampshades were created two hundred years ago. Such an interesting name came to us from French and translated means "muffled light"... As a rule, they were made of leather, wood or fabric, but lampshades made of multi-colored glass and crystal were especially popular and fashionable in those days.
You can also use whatever materials you like to create this beautiful and sophisticated decor item for your lamp.
In order to decorate the lampshade for the lamp yourself, you need to choose it with a not too complicated design, so for this you will do the simplest floor lamps and night lamps. They can be both floor-standing and suspended. After all, interfering with their simple mechanism from a vertical base and a round frame will not be a big problem for you.
Usually, it is very easy to pick up parts for such lamps or replace them with a frame made of wire, wood or metal. The main thing is that the lamp with a lampshade is very firmly attached to its structure.... At the same time, a floor lamp with a lampshade will never be damaged or fall, and you can safely move it to any place convenient for you.
Master classes with description
Making or decorating lamps with lampshades is a creative and interesting activity, at the same time very fruitful: it gives the opportunity not only to make a unique element of decor, and in full accordance with the style of the room, but also helps to preserve cash... You just need to buy the most uncomplicated floor lamp or night light for little money and decorate it for every taste. Various manufacturing techniques and materials will help you with this.
At home, you can create lampshades for every taste. For this you will need any serviceable night light, lamp or floor lamp, as well as the frame and base for them. The lamp should be LED or energy saving so that the material from which your lampshade will be made does not deteriorate. When making such a decor item, you must carefully observe all safety standards, because working with electricity can carry a potential threat of fire or electric shock.
Try not to use materials that can be flammable and have a toxic composition during work, so as not to harm yourself and others. A frame of any shape can also be made independently from wire or purchased ready-made in advance.
You can use the most extraordinary things as items for decorating the lamp, from children's toys to building materials or items made of plastic and paper.
Made of wood
The most durable and moisture resistant are wooden lampshades that will serve you for a long time and at the same time will fit into any interior in a classic or modern style... But usually they are of great relevance for a bath or sauna. To make such a lamp out of wood with your own hands, you will need a roll of paper, a simple pencil, wood and self-tapping screws.
Using these materials, you can make a corner light:
- To do this, on paper, draw a layout of the frame in the shape of a trapezoid. Please note that the side pieces must match the wall on which the luminaire will be mounted.
- Next, take wood and apply a layout drawing on it and cut it out. Wood can be treated with paint or varnish. Make a frame from three wooden planks one centimeter wide and half a centimeter thick.
- Combine the top and bottom of this frame at the sides and center. Measure from the middle to the edges and cut a few more planks of the same size. The strips must be fastened with self-tapping screws from the inside.
- You can also make a lamp from vines or dry branches. To decorate a lamp made of dry twigs with your own hands, you will need twigs of various sizes, a lamp, a base for a lampshade, glue, paints, brushes.
- Before gluing the branches to the base, sand it with sandpaper, then wipe it with alcohol. This will make the branches stick better. Next, take the branches and glue them in different order to the base in a circle.
- After the lampshade is completely dry, attach it to the lamp.
- To make the lamp look bright and modern, paint the twigs silver or gold acrylic paint... By combining these shades, your lampshade will turn out in nordic style and will decorate any interior.
- You can also add various decorative elements in the form of cones, chestnuts, feathers, artificial leaves, beads or sparkles.
Weaving from vines and branches has never lost its relevance, and if there is a desire to please yourself, as well as create interesting decor items for the home, then you can do it yourself, only by studying the sequence and rules for working with such material as a vine.
For weaving a lampshade or various objects, you can use branches of all varieties. and you... This should be done in the spring before the first shoots appear on the branches, so that the product is of high quality and lasts a long time. An excellent material will be branches of willow, straw and reeds, which are also procured in advance. This usually happens in autumn time of the year. And for a solid base of products, twigs are suitable walnut and willow.
You can select rods for the product in different sizes and make ribbons from them for decoration. You can also change the color of the product by holding it in water for some time. This will give it a more sophisticated appearance.
From paper
The advantage of a material such as paper is its availability and ease of making products of any shape. A lampshade made from newspaper tubes is one of the most popular and creative ways. To weave such a lamp shade, you will need newspapers or magazines, a bottle, scissors, glue, disc, paint or varnish.
Operating procedure:
- The tubes are harvested in advance by folding and gluing, they also need to be dried well.
- Next, we cross three tubes, put a bottle on them and weave in a spiral. Thus, the lampshade expands by superimposing the tubes on top of each other. Thus, we reach a certain size, glue and cut unnecessary tubes. After that, you need to paint the lampshade and varnish.
It will be very easy to make a paper lampshade with butterflies... You can also use various origami fakes.
The lamp frame is taken as the base of the lampshade. Next, cut out a large number of butterflies according to the pattern and fasten them to the frame with a transparent fishing line or white thread. Such a product will look very original and will fit well into the child's room.
Any decor elements will do to decorate a paper lampshade. Consider several useful ideas for decorating such lamps. To add a little flair, get some butterflies from a stationery store, or make your own. Next, attach it to your lampshade. Such a decoration idea lighting fixture will appeal to any child or teenager.
An even more original idea is to decorate the lamp with special aromatic bags containing dried herbs and essential oils. This will create a romantic and cozy atmosphere in your room or bedroom.
The pleasant scent of herbs and flowers will always be present next to you.
If you are fond of collecting herbarium from flowers and leaves and decided to use them to decorate the lampshade, then you definitely cannot go wrong creating such unusual element decor. You just need to glue them onto the finished lamp and let the glue dry. So you can do it rustic lampshade, which will decorate any interior in the country or in the house.
Wallpaper lampshade would be a great idea. Its creation does not require large costs and efforts. Consider the most interesting option, made in the form of an accordion. This will require a lamp frame and wallpaper. On the section of wallpaper you need, draw stripes, the distance between which will be at least two centimeters. Then fold the wallpaper into an accordion shape and make holes on the top of the cut. Then you need to thread a lace through them to fix and glue the structure.
Another idea for creating a lampshade - from a napkin. To do this, you need to have glue, crocheted napkins and a balloon. Next, we take napkins and coat with glue, put them on a balloon and wait for them to dry completely. The ball can be pierced or lowered, and a light bulb can be attached to the resulting lampshade.
Napkins can also be made of paper. Cut them into equal parts, glue the lamp with glue and glue to its surface. You can attach a ribbon or braid to the bottom or top of the luminaire for a more vintage look.
From scrap materials
To make a lampshade from scrap materials, you should initially decide from what means it will be made, and you also need to have a frame for the lamp. A balloon or a ball can serve as such a basis.
Another option for the material for creating the frame of the lampshade is the usual five-liter plastic bottle... To do this, you will need to cut off the top of the bottle and paint it from the inside with any light paint, and from the outside with blue or green. To make the edges of the bottle look neater, tape the edges of the bottle to match the color of your lampshade.
With your own hands you can make lampshade made of plastic cups. To do this, you need a stapler, wire, a wooden base and a lamp holder. Next, the glasses are fastened in a circle to each other, and a cartridge with a lamp and a structure made of cups are attached to a wooden base.
Such an original and practical lampshade will serve as a worthy addition to your interior.
Any material at hand can be used when decorating a lampshade. Cocktail tubes are no exception. To do this, it is necessary to prepare about two hundred straws, which are glued to the glass base of the lamp with the help of construction glue. And from finely chopped multi-colored tubes, you can make a small night light in the shape of a cube.
The most easy decision decorating is gluing cocktail tubes vertically to make the old lamp even brighter and more beautiful.
It will not be difficult to make a lampshade made of simple galvanized wire and beads. This will require a pair of wire cutters and pliers to shape the wire into a variety of shapes. These can be curls, leaves, hearts, circles and patterns. Such simple construction will look very original. You can also make a wire base and stretch fabric or leather over it.
Cardboard lampshade do it yourself is very simple to manufacture and will differ in its unusual appearance, while it will find a place in any room. To do this, you will need to cut four frames from durable cardboard and attach fabric to them on the back using lacing. For this, not only ordinary threads can be used, but also various ribbons or braid.
Thus, you will get a flashlight, which must additionally be glued with glue. After that you can paint this unusual lampshade in any color and install on the lamp.
Cork or self-adhesive paper can also be great for making lampshades. First, apply a silver paint to the old lamp, then glue it over with cork paper. Glue twigs on top of them different sizes... And if you still have felt, then you can sew a new lampshade out of it. First, make a pattern for the base of the lamp, sew its parts and pull it over the base. Decorate with various appliqués.
From threads
The most sustainable option for your home would be DIY lampshade made of twine or twine. To work you need a thread of two different colors or varieties, a needle, a balloon, glue and a cup. In order for the thread to be impregnated with glue, it must be passed through a glass of glue or a jar of glue should be pierced. This can be done with a needle.
Next, take the ball and draw a circle on it for the hole for the light bulb, while wrapping the ball so as not to touch this circle. After that, we leave the ball for a while so that the glue dries well and the structure does not deform when air is released from the ball. Next, we insert a cartridge from an old lamp into the hole and fasten the resulting product to the ceiling.
Another unusual way decorate a lampshade is crochet it... To do this, you need a base for a lampshade, yarn, crochet hook, glue. According to the knitting pattern, knit two openwork products of the required size and completely circle the frame of the lampshade. Patterns can be varied.
To give the product an even look, apply a mixture of water and glue, diluted in equal proportions. While drying, you can shape the lampshade to any shape. Next, install it on a floor lamp or lamp.
And in order to make a wicker lampshade with your own hands, get a frame from an old lamp in a retro style. This element will make your interior unusual and highlight its dignity. For making, you need threads, glue and a spray bottle. Wrap the base of the lampshade with free and simple movements.
Make sure the threads are tightly wrapped. After that, dilute the glue with water and spray from a sprayer onto the threads so that after drying they keep a certain shape.
Manufacturing jute lampshade will become great ideas for those who want to decorate their home. To do this, you need jute thread, glue, wire, decorative leaves. First you need to make a shade template that will match the lamp frame. TO ready-made template we fasten screws or nails. Then we pull the thread along the outline of the layout and drag it vertically along the entire outline. Next, we do the weaving horizontally and process it with glue.
Immediately after drying, remove the product from the model and glue the side parts. In order to decorate the lampshade, take decorative ivy leaves and attach them with wire to the base of the lamp. Such a lamp will create a fabulous atmosphere in your home.
From fabric
First you need to choose the fabric for your lampshade. It can be fabric of any density and rigidity. The choice of material will depend on what the lamp frame is made of, but preference should be given to dark fabrics over transparent ones, as this will be more practical.
Use blue or green fabrics to keep the light emitted cool, and yellow or reds for cool light.
If the base for the lampshade is made of wire, paint or tape should be applied to it so that the fabric does not deteriorate over time. You can sew the product manually or on sewing machine... You will also need an iron, pencil, tape measure, thread, and glue.
First you need to take measurements and cut out a template that will fit the frame of the lampshade. Next, cut out a pattern according to the template and match the threads to the fabric. We sew the details on the sewing machine and then smooth them with an iron. The next step is to glue the piece to the base of the lamp. In this case, you need to carefully hide the seams, tightly fitting the frame. It is enough to dry the finished lampshade and put it on your lamp.
Materials (edit)
Most suitable and available materials Is paper and the cloth... They lend themselves easily to transformation, each of us is familiar with them and they can be found in each home... Wonderful fixtures are obtained from threads or yarns. Naturally, glass can also be used for shades. At home, these are ordinary or unusual, with an interesting shape, banks or bottle... In especially daring projects, and plastic containers, and packaging for coffee, and plastic toys for children.
Plus, don't throw out options like rattan, bamboo, and rubber. As a basis for a future product, both raw materials and already ready product... So, for example, designers got the hang of creating delightful lampshades from beads, globes, parts of services, mirror shards and even crumpled sheet music! One has only to take a closer look at the objects around you ...
Realizing how difficult it is to move from thought to action, especially to see an exquisite accessory in an ordinary jar, we have prepared several master classes for you. Following step by step instructions, you can easily make hand-made new things dear to your heart for any room in the house.
Ideas and their implementation
Since we have already announced the materials suitable for the manufacture of lampshades and lampshades, let's start with paper.
Plafond with butterflies
For work we need:
- white thin cardboard
- thin twine or line
- glue gun
- wire for frame
- utility knife or scissors
- round nose pliers
Advice! Before starting work, decide on the size of the finished plafond. In our example, the diameter is 30 cm, which means that we need a piece of cardboard 90 cm long.
- We make a frame. Cut off a piece of wire 96-98 cm long. Roll the wire into a circle with a diameter of 30 cm and fix the ends with round-nose pliers.
- We cut 3 suspension elements from twine or fishing line. We measure the length of the pieces based on the height at which you plan to hang the lamp. We tie them to the wire in three places, evenly distributing the load.
- We draw butterflies of different sizes on cardboard and cut them out.
- We roll up the cardboard, glue the joint with a strip thick paper or stitching with a stapler.
- We fix the upper part on the wire. For this, you can use both glue and thin wire.
- The joints and cuts can be decorated with butterflies remaining after cutting.
Look at what an elegant lamp we've got. It will fit perfectly into the nursery and the bedroom. You will see a special chic when you turn on the lamp and butterflies flutter along the walls.
Advice! Instead of butterflies, you can cut snowflakes, stars or flowers. Decide for yourself what you like best.
60s style
If you ask our grandmothers, they will certainly remember floor lamps with lampshades in the form of an inverted bucket, tied with colored threads. We can do exactly the same with our own hands.
We need:
- frame for lampshade - 2 pcs.
- decorative braid (3 colors, choose a combination according to your taste)
- scissors
- crochet hook
We start manufacturing.
- We tie the first braid to the lower ring of the lampshade, leaving the tail at least 5 cm.
- We pull it over the top ring with outside, we throw it over it and stretch it through the inner side of the lower ring. We alternate actions until the beginning of the next sector of the frame.
- We fasten the first braid and use a braid of a different color. We knit it to the next sector, not forgetting to leave the tail on the first knot.
- We do the same with the third sector, filling it with the remaining tape.
- We stretch the ponytails along the bottom of the lampshade using a crochet hook.
Here is our shade from the distant 60s and is ready, it remains only to insert the cartridge and assemble the chandelier in any order.
Fringed braid
Another original idea for a do-it-yourself lampshade is also associated with braid, but not single-layer, but with fringe. What do we need for this?
Prepare:
- two metal hoops or use an embroidery hoop
- fringed braid
- line
- acrylic paint, the same color with tape
- glue gun
- scissors
Advice! Fringed braids are available from curtain and furniture stores.
- We paint the hoops or hoops with acrylic paint. If they are already covered with varnish or other paint, it is better to sand and grind them.
- We wait until the paint is completely dry, and make three marks on each lamp shade ring, placing them on equal distance apart.
- Cut three identical pieces of fishing line.
- We tie them to the smaller ring of the lampshade, leaving the upper ends with a margin, so that we can then tie them to the lamp cord.
- We measure the length of the fringe, subtract 2 cm from it, and tie the fishing line to the second ring for the resulting length. So we can get a cascade.
- We heat the glue gun and carefully glue the tape along the lower ring.
- We do the same with the upper ring, pulling it out of the lower one.
Advice! Note that hot glue can melt the line, so be careful not to apply it directly to the line. Drop the glue on the paper, let it cool slightly, and then apply to the fishing line.