Sew roller blinds on plastic windows ourselves. Roller blinds in a country interior

Window decoration with curtains is an important element in the interior design process of a room. This question is especially relevant in the arrangement of small spaces - such as a small kitchen. One of the best solutions for such areas are do-it-yourself roller blinds sewn and mounted on a frame. Their mechanism is not as complicated as it might seem at first glance, and it is quite possible to make it yourself. How to make roller blinds - a detailed master class will help you figure it out.

The mechanism of roller blinds is a piece of cloth, which, opening the window opening, is rolled into a roll onto a roller hidden in a pocket.

This principle of operation has its advantages for decorating windows over traditional curtains in their classic form:

• they are suitable for any premises, from the living room to the kitchen;
• have simple and very convenient designs;
• with their help it is easy to regulate lighting;
• used as independent curtains, and in tandem with other curtains;
• they are hung on both wooden and plastic frames.

It is convenient to attach roller blinds directly to the window frame. So they will not interfere when the window is opened in ventilation mode.

The principle of operation of roller blinds

Making roller blinds with your own hands, relying on the proposed master class, will cost much less than choosing a ready-made mechanism in a store. Their cut is so simple that it is available even to those who do not have perfect sewing skills.

The principle of operation of roller blinds is as follows:

1. The function of the cornice is performed by a rod-shaft, which is attached to the frame or above the window opening. The canvas is held on it.
2. The fabric itself is fixed with garters made of cords or ribbons. They are attached to the top of the structure, where the shaft mechanism is located.
3. Garters allow you to open the curtains to any height.
4. Depending on the shape of how to sew roller blinds, they can have several transverse "leaves" of different widths, adjustable by garters.

How to install roller blinds without drilling (video)

Measurements for roller blinds

To build a pattern for roller blinds, it is important to determine the dimensions that you want to mount on the window - whether they will cover only the glass or hide the window frame as well.

For this:

• the window is measured and all the obtained values ​​are recorded in a notebook;
• the length of the product is calculated from the sum of the height of the window, plus 15 cm for the pockets and 2 for processing the sections;
• curtain width - those dimensions that will cover the glass in the frame plus 2 cm for processing sections.

The choice of fabric for curtains in the kitchen

When choosing a fabric, two features should be taken into account:

• curtains must provide high quality protection from light;
• they will be clearly visible in the window from the street.

Therefore, the canvas should be dense and preferably double-sided. If the selected fabric does not meet these parameters, there is no need to be upset. It just takes twice as much of the calculations required by measurements to sew it in two layers with the wrong side to each other.

It will be better to choose a material that has an antistatic effect. This will prevent dust from settling on the curtains and will need to be cleaned less frequently.

How to choose roller blinds for the kitchen (video instruction)

Required materials and tools

To make original curtains, you can limit yourself to choosing a suitable fabric by hanging it on a ready-made mechanism from a hardware store or hardware store. But its design can be assembled independently.

The described master class will require the presence of the simplest tools and materials available:

• 2 wooden slats in the length of the window opening;
• furniture stapler;
• sewing machine;
• metal corners;
• the cloth;
• thick satin or corsage ribbon;
• decorative buttons or buttons.

Master class on sewing and installation of roller blinds for the kitchen

A detailed master class will help you quickly understand the technology for manufacturing roller blinds.

You just need to follow the instructions:

1. If the selected fabric is double-sided, the cut sections are tucked up, stitched with a basting seam, then stitched on a sewing machine.
2. If the curtain is cut from two fabric cuts, the patterns are folded with the right side inward and connected with basting stitches from the bottom and on the sides, then stitched on a typewriter. The workpiece is turned inside out on the front side, the corners are carefully straightened, steamed with an iron and the upper part of the curtains is covered.
3. In order for the curtain to be beautifully stretched, a weighting agent is attached to the bottom. To do this, the bottom edge is tucked up and sewn to the canvas to make a pocket. A rail or metal rod is inserted into it.
4. The curtain cloth is attached to the base - a wooden bar. The fabric is placed on a flat surface, the upper edge of the future curtain is wrapped around the rail and pinned with a furniture stapler.
5. As garters, use ready-made ribbons or sew them with your own hands from a fabric of a suitable color. The length of the garters is determined by doubling the height of the window plus 15-20 cm per knot or buttons.
6. The garters are attached to the base with a stapler. They will hold the roll of the rolled curtain.
7. To fix roller blinds in a window opening or on a frame, use metal corners. They are first screwed to the wall or frame, then fixed by the upper part from both sides to the base of the roll structure.

That's the whole technology of sewing and installing the most elementary design of roller blinds. To do such, you need to spend only an hour and a half of free time with minimal material costs.

Roller blinds in the kitchen (photo)

Among the huge variety of curtains, blinds are of particular interest to the consumer. The reason for this choice is quite compelling, in our small-sized apartments it is quite difficult to place not only cascades of heavy curtains, but even the most necessary furniture. Therefore, the issue of saving space is more than acute.

DIY blinds - photo

Blinds partially solve this problem, since they take up very little space due to their placement close to the glass unit. But the cost of this product is also considerable, and making blinds with your own hands is not difficult at all. In this case, you can choose the material that matches your preferences in color and texture.

Types of roller blinds

In order to start making roller blinds, you need to understand what these products are. In fact, this is a rectangular piece of canvas, located in the window opening or very close to it. The curtains are opened by raising the fabric to the required height, while the material is rolled into a roll (hence the name).

There are the following types of roller blinds, differing mainly in the type of construction of the lifting mechanism and the method of installation:

• The blinds can be installed either on the wall using the curtain rod or on the frame itself. In this case, it does not matter whether a wooden or plastic window is in your apartment. It's just that in the first case, a block on self-tapping screws will be used to fix the curtain, in the second - double-sided adhesive tape. Also, blinds can be mounted separately on each window sash.
• Another difference lies in the location of the roll on which the fabric is wound, the roll can be located both at the top of the curtain and at the bottom.
• In addition, roller blinds can be divided according to the functions they perform. For example, curtains made of dense, translucent fabric are used to completely darken a room. And the curtains made of openwork fabric will imitate stained glass or simply dim the light from the window.

An interesting option for additional decoration of the room are day-night blinds, in which dense fabric is combined with transparent material in two layers. Depending on the time of day, you can use one or another canvas.

Step by step creation of roller blinds

Regardless of the type of roller blinds, the manufacturing technology is, in principle, the same, first the canvas is prepared, then the lifting mechanism. Therefore, we offer instructions for the step-by-step creation of a roller blind.

Choosing the fabric for the curtains. The best option would, of course, be a special material with protective layers, which not only practically does not get dirty, but also has antistatic properties, is resistant to fading and deformation.

Depending on where the curtain will be fixed, we measure the dimensions of either the window opening, or the sash, or the window frame. We cut out curtain fabrics of the appropriate size from the fabric with an allowance of 2.5 cm at the edges and 15 cm in length. At the same time, there are two strips for each curtain, for the front and the wrong side. If the window is very wide and it is impossible to make a curtain from one piece of material, we cut out the fabric so that the seam falls on the window frame.

We sew the front and back sides, for this we fold the pieces "face to face" and sew from the inside out on three sides. Then we turn out the fabric, sew the rest of the curtain and carefully iron the seams.

Bottom roller blinds

The easiest way to make blinds with a lower shaft:

Unfortunately, such curtains will have to be rolled up manually and fixed with tapes.

Curtains on the cornice

A more difficult option to manufacture, but more convenient to use. Such blinds can be opened to any height no longer manually, but using a counterweight system:

The curtains are raised by pulling the cord, which is fixed at the required degree of curtain opening, all on the same hook.

How to install a roller blind on a finished mechanism?

The most effective option, but requiring some investment of funds, is to install a curtain on a ready-made mechanism:

• To do this, you need to purchase a special set consisting of a lifting mechanism, a shaft and a fastener, which is subsequently adjusted to the size of the window.

• The bottom of the canvas is designed similarly to the previous options, one of the Velcro elements is sewn onto the upper edge. The second part of the adhesive tape is attached to the shaft using double-sided tape or glue.
• Brackets and a lifting mechanism are fixed on the wall over the window opening, the curtain is fixed on the shaft and rolled into a roll. The entire structure is installed in a regular place and the operation of the blinds is checked.

What can homemade roller blinds look like? Photo examples of ready-made options

As you can see, the manufacture of roller blinds is not particularly difficult and even an inexperienced person can do it. But the opportunity to create a worthy product of your unique design really deserves attention. Below are the options for roller blinds (photos and examples), which were made by hand:

Roller blinds have become very popular for decorating windows in various rooms, and when they come to the store, their eyes simply scatter from the abundance of goods of different colors and materials. How to sew roller blinds with your own hands? - this is the main question of housewives who love to do needlework or those who have a limited budget. We answer - of course it is possible, and even necessary! And it doesn't take a lot of effort, just patience and the necessary materials.

There are a number of advantages, why many people choose roller blinds. First, it is practical and economical in terms of finance and floor space. Secondly, they are suitable for any room in any design style. Thirdly, thanks to the lifting mechanism, the light level of the room can be adjusted. Fourthly, it is very easy to take care of them, and it will be necessary to do it extremely rarely, in contrast to the classic long curtains. Fifth, roller blinds on plastic windows are very easy to install using self-tapping screws or adhesive tape.

Which fabric to choose

The best fabric for any roller blinds, including roller blinds, is polyester. This material has a special impregnation that protects against water, dust and dirt. Polyester curtains do not have to be completely removed and washed with light dirt, it is enough to treat the stains with a damp cloth. Although polyester has such positive qualities, this does not mean that other fabrics are not suitable for roller blinds. You can use heavy cotton, linen, cambric and even burlap.

The color and pattern on the fabric should correspond to the main idea of ​​the interior. Horizontal stripes widen the window opening, but can significantly lower ceilings. Bright flower patterns are better to be small, because a large bumpy pattern can disadvantageously focus attention on a modest window. If the room is exposed to too much daylight during the daytime, you can hang roller blinds made of thick fabric in dark shades. White and beige fabrics make the room bright and cheerful, and let the sun's rays through well.

Required materials and tools

The materials that you may need when making Roman blinds with your own hands are very simple and uncomplicated.

• Piece of fabric
• Centimeter letnaya for measuring and cutting the canvas
• Sewing machine
• Two wooden blocks
• Screwdriver and self-tapping screws
• Furniture stapler
• Ribbons and laces for fastening

Step-by-step instructions for the manufacture of roller blinds

You will learn how to make roller blinds with your own hands from our article using a detailed description of the process. To begin with, let's discuss how to usually measure the height and width of the window before cutting the product. If a do-it-yourself curtain will be installed inside the window to the upper frame, then we measure the height and width of the opening. And if you decide that the canvas should be fixed on the wall above the window, then we measure it like this: from the upper edge of the window we retreat up 10-15 cm, and the cornice will be fixed there. Next, we measure the length of the planned curtains, it will be 10-15 cm below the windowsill, and the width will also protrude 10 cm on the sides.

Before making measurements, you need to decide in which part of the window the roller shutter will hang - inside the opening or outside

With side cord

Homemade roller blinds with this type of rise are more convenient to use, but may take more time and effort to manufacture and install.

1. Cut the fabric curtains according to the measurements of the window, you should have two identical blanks, do not forget to leave allowances for the seams.
2. We make a pocket for the weighting rail at the bottom of the curtain and insert it. At the top, the product will be attached to a wooden block with Velcro.
3. Next, we sew the plastic rings on the ribbons, stepping back from the upper edge about 5 cm, and from the sides 15 cm. We screw the hooks on the back of the setting bar.
4. The curtains will be raised using two cords threaded into the rings. The length of the first is equal to three lengths of curtains, and the length of the second is the same plus half the length of the canvas.
5. Tie the cords to the hooks and thread them around the curtain through the rings. Pay attention to the photo: the longer cord must go through two rings.
6. The cords are fixed to the wall from the side of the longest cord. If it is necessary to raise the roller blind, you just need to pull on the threads and fix them at the desired level.

With garter strap

1. The first step is the same as in curtains with a side cord: transfer the measurements taken to the fabric and cut out the parts, they are sewn in the same way as in the first case, leaving one side not sewn.
2. Fold the fabric face to face and sew along the edge on three sides, leaving the top edge without a seam.
3. Turn the product inside out and iron all seams with an iron. You have a so-called bag.
4. We turn the bottom edge so that we get a pocket for the weighting agent. We sew and insert the weighting rail.
5. The second wooden plank must be fixed on the frame or above the window, and then we attach tapes to this plank to fix the raised curtains.
6. We attach the finished curtain to the improvised cornice using a furniture stapler.

Important! With this installation method, it will be problematic to remove the entire fabric for replacement or washing. Therefore, we offer the best option - this is Velcro. Glue one part of it to the block, and sew the other along the edge of the curtain. So you can easily replace the annoying curtain with a new one.

As you can see, it is not very difficult to make such unusual fabric blinds yourself. Stock up on creative inspiration and patience and then everything will work out!

Below is a video on the manufacture of roller blinds with a factory lifting mechanism

There are plenty of options for decorating window openings in our time. But if the room is relatively small, then the choice is somewhat limited. Massive canvases only "conceal" the usable area, fabric curtains in some rooms (in the same kitchen) get dirty quickly, installing blinds is not always possible or advisable.

For example, for windows with non-standard dimensions, you will have to place an order according to your drawings and pay extra for this. Roller blinds, which are easy to "hide" or unfold, in many cases - the best solution. And how to make them with your own hands, and with insignificant costs, the reader will find out after reading this article.

The author draws attention to the fact that we are talking about roller blinds. They are often confused with the so-called "Roman" ones, although these are somewhat different designs. The similarity is only in certain details, and the fundamental difference is in the "lift" scheme.

The principle of operation of the roller blind

The structure includes a roller (it is sometimes called a roller), on which a cut of the web is fixed, which is wound when it is lifted. A more complicated option is a cassette, where the shaft-rod is "hidden".

The roller rotates on an axle, which is attached using brackets in several ways:

• On the sash frame, at the top. This will not prevent the windows from opening even when the blind is drawn.
• At the top of the opening. Not very convenient, but such a solution allows you to cover the entire window with one canvas, like.
• On the wall. Alternatively, on the sidewalls of the window opening. This method of fastening allows you to almost completely eliminate the appearance of drafts in the room.

Control method for roller blinds

• Manual. In a nutshell, “pulled the string,” and the curtain went up or down.
• Automated. The control is more convenient, but you have to install a mini-engine, determine its power, think about how to make a drive. And that's not all the difficulty. For making roller blinds with your own hands - not the best option.

Choosing a fabric for roller blinds

What to consider:

• When the canvas is lowered, the seamy side is visible from the street. Conclusion - for such structures, you need to use a double-sided material.
• They can be used not only as the only option for shading windows, but also in combination with other design solutions in the form of thick curtains suspended from curtains. Based on this, the fabric is selected. In the first case, it should be dense, and in the second, you can use a translucent one. Such a roller blind will only slightly shade the room, by analogy with blinds.

Ordinary fabric (for example, often used linen, tapestry) requires additional processing, which implies the impregnation of the fabric with special compounds with the prefix "anti", that is, protecting roller blinds from bacteria, static charge, decay. This is especially true for specific premises - kitchens, bathrooms. Experts consider polyester to be the best option (the name polyester is often used).

Additional structural elements

Weighting agent

It is a wooden (plastic) rail that is attached to the bottom edge of the canvas. The purpose is clear - this is a kind of weight that pulls it down when lowering the roller blind. A metal bar or something similar should not be used. If it is metal, then spots will appear on the canvas. It will not be possible to completely withdraw them, it is checked.

Garters

There is a choice - ribbons, cords. The quantity depends primarily on the width of the roller blind. The main criterion is the convenience of ascent / descent. When determining the length of each adjusting element, double the height of the web and add a few cm as the required margin (about 12 - 16). It is needed to fix the curtain in one position or another when you have to make a garter (knot, bow - as you are accustomed to).

Shaft-rod

In homemade structures, it is advisable to use a wooden blank. It is more difficult to work with metal products. First, you need a thin-walled pipe, moreover, made of stainless steel. Secondly, its fastening on brackets will also cause certain difficulties. The recommended diameter is from 25 to 50 mm, depending on the height of the window.

Measurement production

How to produce, it is up to the master to decide. A roller blind can cover either the entire opening, or the frame, or a specific sash. It is only necessary to leave 15 - 20 mm on each side of the canvas so that you can make bends of the material and sew on a typewriter.

But this is when it comes to fabrics. In some cases, canvases made of bamboo, dense polyethylene film are used, there are other options. But the meaning is clear, and there is no need to tell a good hostess what an allowance is.

Preparing roller blinds

• If the canvases are one-sided (meaning coloring), then they need to be sewn by attaching the wrong sides to each other. Accordingly, when using double-sided material for a roller blind, this item is skipped.
• The weight can be attached in different ways. One of the options is in the pocket, which is located at the bottom of the canvas, along its entire width. Therefore, here, too, you will have to make a "line" after the weight is laid.
• The last step is ironing, as the roller blind can then be hung out.

Shaft-rod fastening

The figures show some methods and hardly need any further explanation.

Attaching the curtain to the roller

There is also nothing complicated here - with staples (stapler), buttons, and so on. Someone does this with a long zipper. As an option of a removable structure - on small hooks.

Garter fixation

Similar to roller blinds. It is easy to figure out how to place it on the roller, focusing on the width of the fabric.

Naturally, at the end of the assembly, the operability of the roller blind is checked.

It is generally accepted that roller blinds are installed in the upper part of window openings. But if you think about it, they can be used in a different way. For example, . The structure, fixed on the ceiling, will allow you to either install a decorative partition or quickly remove it at any time. Isn't it a solution to the problem of small spaces?

"Turn on" your imagination, dear reader, and you will surely find another, no less rational use of hand-made roller blinds. If the house has glass doors, then this is a good way to temporarily "shield" the room (if necessary) from prying eyes. The same fully applies to glazed balconies (loggias).

The outlined instructions contain only a list of works and recommendations for individual stages. The production of roller blinds requires a creative approach, taking into account personal views on the issues of interior decoration, its specifics and a number of other points. If you approach this process creatively, with an understanding of the technology of work, then you can make any kind of roller blinds with your own hands - according to the method of fastening, material, shade of fabric, and so on. For example, use Velcro and buttons on tapes. Make decorative garters. It is easy to weave them with your own hands, from multi-colored cords.

Roller blinds are an unusual type of drapery for a window opening, which is similar to Roman blinds, but the lifting mechanism is different. Sewing such curtains is simple, traditional materials are used for this.

Sewing roller blinds does not present any particular difficulties, the main thing is to properly fix the roller structure.

Additionally, the canvas can be decorated with beads, embroidery, fringe... The selection of accessories depends on what kind of result you want to get.

Advantages of roller blinds

The lower part of the fabric is stitched, a weighting agent is inserted into the gap formed.

Do-it-yourself roller blinds have certain advantages:

1. The ability to combine them with other curtain options. The roller blind covers only the sash of the window, and ordinary sliding canvases can be used to decorate the rest of the space. This allows you to keep the room cool on a very hot and sunny day, while the main draperies remain open.
2. For kitchens, roller blinds are the best option. They rise easily, do not drag on the floor. If necessary, they can be easily removed for washing.
3. Sewing curtains of this type is simple, no special experience is required. You just need to know how to use a sewing machine and a needle. The sewing process consists in first cutting 2 pieces of fabric, after which they are sewn together. A special weighting agent is installed below, which straightens the fabric in a straightened position.
4. These curtains can be used for any type of openings and for window frame structures. The cornice can be attached directly to the top of a plastic or wooden window.
5. After installation, the canvas adheres tightly to the window, it does not let in sunlight, providing comfort at the right time. The possibility of peeping from the street in the evening is excluded.
6. The fabric is very easy to care for, it only needs to be removed from the curtain rod to be washed.
7. Curtains allow you to darken the room completely or give it a pleasant twilight.
8. There are many design options. Such curtains can be sewn from ordinary smooth fabric, which has absolutely no pattern. The bottom edge can be decorated with fringes or beautiful curly beads.

Back to the table of contents

What is the difference between roller blinds and roman blinds?

Before you sew a roller blind with your own hands, you need to understand how it differs from the usual Roman one, so as not to make mistakes during cutting.

A Roman blind looks like a roller blind, but it rises upward with special strips and braid, it is actually divided into several sections.

A roller blind is a flat piece of fabric, which is wound upward and reinforced with a tape due to a special weighting agent.

Such a curtain is lighter and simpler, its appearance is in perfect harmony with almost any environment.

For sewing, an extremely simple cutting is used, a rectangle is cut out of the fabric, and a seam allowance is provided. After that, the second part is cut out for the seamy side, the canvases are sewn together, ironed. He spends a minimum of time on sewing, and the result is impressive.

Back to the table of contents

Materials and tools

To sew roller blinds, you need to prepare the following materials:

1. 2 pieces of fabric, one for the front and one for the back. You can use a canvas of the same quality and color, but it is best to use completely different ones. For example, for the front part, take a bright canvas with a pattern, and for the wrong side - a lighter and more monochromatic one. It all depends on what kind of curtain look you need. The number of canvases depends on what design and dimensions the window opening has. For a small window, one curtain is enough, but if the opening is large and the window has several sashes, then for each of them you can make a separate roller blind. For each such sash, you need to take 2 pieces of fabric.
2. Ribbons or braid for decorative curtain garters. Calculating the length is not that difficult. For a small curtain, 2 such ties are enough, their size is equal to the length of the canvas plus 20-30 cm. For each such awning, you can provide for a large bead. This will make the design more attractive.
3. Wooden bar as a shaft or a special curtain rod for roller blinds, which can be purchased from a specialist store. The length of the eaves will be equal to the width of the window opening, it is allowed to add 1 cm. It is much better to use a ready-made cassette system, then the use of curtains will be easier.
4. Special weighting agent in the form of a wooden or metal strip. It should not be too heavy, but during use it is necessary that the bar pulls on the fabric.

The garters must be thrown over the top fasteners and fixed with a stapler.

Additionally you will need:

• construction stapler;
• screwdriver, self-tapping screws for installing the cornice over the window opening;
• iron;
• sewing machine;
• threads, needles;
• decorative beads, fringe.

Before preparing the fabric, it is necessary to measure the window opening. You need the following values:

• the length of the window opening;
• width of the window opening;
• the length of the future curtain, usually it is done up to the level of the windowsill, but you can take it lower or higher - it all depends on the desired result.

Back to the table of contents

Completing of the work

How exactly should the curtain be sewn? Sewing roller blinds is simple. The following procedure is followed:

1. The fabric must be smoothed, spread out on a flat surface. After that, on the seamy side, the fabric must be sewn around the perimeter, leaving one side open so that the future curtain can be turned inside out. When the curtain is turned out, you need to straighten it, carefully smooth it with an iron.
2. Further actions depend on where exactly the weighting agent will be located. If it is internal, then it is best to leave the gap open. If a separate pocket is made for the weighting agent, then such a gap must be carefully stitched on a sewing machine.
3. If the option with a pocket is chosen, then it is necessary to sew up the left gap, then make a pocket, insert a special weighting agent into it, which will ensure the straightening of the fabric.
4. If the option with an internal weighting agent is used, then it must be placed inside. After that, the weighting agent and the bottom of the future curtain are neatly used. Thus, future blinds will not twist, and the weighting agent will no longer be able to move.
5. The canvas is ironed again, after which it is carefully wrapped on a block, attached to it with a construction stapler. Such fasteners must be strong so that the fabric cannot slip off during use. If a metal pipe is used, then it is necessary to sew the fabric after wrapping. Some people advise using special Velcro tapes, one part of which is glued to the pipe, and the other is attached to the top of the canvas. In this case, the fabric can be quickly removed for washing without cutting the threads.
6. The lower part of the curtain can be decorated in completely different ways. Fringe, large glass beads are great. During sewing, we must not forget that ribbons will be used to fasten the curtains at the top.
7. If a special curtain rod is used for a roller blind, then the fastening will be completely different. A special mechanism is used, the curtain will be lifted using a strong twine, which is already on the cornice.