Plastic corners are a rather popular view of the finishing materials, resistant to moisture, ultraviolet, temperature drops.
They are used to design opening windows, arches, corners, junctions. With their help, it is possible to gently disguise the gaps and gaps. Due to the variety of sizes, shapes and colors you can pick up beautiful options For any interior.
How to glue corners on the windows
Corners for windows in addition to aesthetic performing another function - protect the slopes from damage. You can start work only after graduation finishing work indoors.
For work is necessary:
- liquid Nails,
- hacksaw,
- malyary Scotch,
- plastic corners.
- All protruding parts in the form of nails, wallpaper, irregularities need to be removed.
- The surface itself is degreased by Whitespit.
- Glowing begins with the upper horizontal part of the angle, then with the vertical.
- Between the side slopes, it is necessary to make a measurement at the top, and cut the corner from both sides at an angle of 45 degrees.
- The adhesive composition is applied to the inside with a gap of 10 mm.
- After that it is tightly pressed and fixed with scotch.
- Next, begin to the side of the corners, cutting them off at an angle of 45 degrees and gluing by the same scheme.
- Scotch can be removed after a day.
Video on the topic
How to glue corners on the ceiling
To work will be required:
- liquid nails or glue,
- pencil,
- hacksaw,
- soap
- stub
- sponge,
- sandpaper,
- brush,
- building level.
It is necessary to start working before gluing wallpapers on the walls and the ceiling, but after surface preparation.
- It is necessary to align all the places using the construction level, to progress.
- The next step will be marked.
- The first corner must be applied between the wall and the ceiling and cover the contour,
- Then repeat the procedure on the other side of the wall.
- Next, you must attach to the wall and make marks in the crossbar places.
- The resulting measurements will help to correctly cut down the length.
- To solve such a task, a stubble for trimming at an angle of 45 degrees is useful.
Gently at the edges of the corners are applied liquid nails, and the corner is pressed against the wall. The joints of the joints are putty and rub in sandpaper.
Glue corner on wallpaper
The procedure for gluing the corners on the wallpaper is similar to the schemes described above, but there are several nuances.
In order for in the process of work on the wallpaper, there are no traces of glue, instead of liquid nails use a transparent silicone sealant, which is easily removed by a damp cloth. Smoothly and gently apply glue will help mounting pistol.
Unlike the stocks of the corners on the windows and the ceiling, in this case they do not use tape for fixation, since the probability of damaging the wallpaper is not used.
We stick on the arch
Arched corners In addition to the functions of hiding gaps allow you to give the necessary shape to the work, hide defects after repair, make the final parts into the interior.
The surface of the opening should be cleaned from old wallpaper, dirt, paint, big protrusions knocked down the hammer. To equalize the surface, a putty or gypsum is used, which must completely dry. To improve adhesion, the surface is also drunk.
General scheme for those interested how to glue plastic corners, as follows.
- Calculate the number of corners and choose suitable color. For decorating the arches take special arched corners.
- Examine the instructions to the selected glue - the moment or liquid nails.
- Buy stubble for smooth circumcision in length.
- Measure the desired length and trim.
- Apply a wide band glue for the middle of the corner from the back and attach to the wall. For more reliable fixation, stick to the scotch.
We disguise the slopes
First of all, those who want to learn how to glue the corners on the slopes, it is necessary to understand how the slopes will have to work - window or door. If the option is the first, you will need to carefully perform fitting in size during operation. 
- The angle of the part that adjies to the wall is cut off with a stouch at an angle of 45 degrees,
- It is then attached to the installation site.
- The angle on the slope is cut.
- Then a similar procedure is carried out with the rest of the materials.
- A colorless silicone germetric applied to the inner corner of the corner is suitable for reliable gluing.
- Next, it is pressed against the surface for reliable fixation.
Selection of glue for plastic corners
For fixing plastic corners to various surfaces Use four types of glue.
Liquid Nails
The second name is the mounting glue. Ideal for mounting the corners on a wallpaper with a relief pattern.
Kraftool Universal - Universal Multipurpose Mounting Glue for Internal and Exterior Work. Suitable for fixing products from PVC, metal, MDF, plywood, stone and other materials on any types of panels, concrete, plaster. It has high resistance to moisture and cold, provides durable and elastic seams.
Cost is about 160 rubles.
Ultima 305 - Russian universal glue for durable plastic compound, plywood, drywall, wood, bricks and other materials. Allows you to adjust the position of the details within 10 minutes after applying. Surfaces after gluing can be painted dispersion paints. Not suitable for operation in shower cabins and bathrooms.
Cost - about 180 rubles.
Polyurethane adhesives
Not all adhesives of this group can be used to fix plastic corners, so you will definitely read the instructions in the store. Polyurethane options are quite expensive, have an unpleasant smell.
As a good "example" can be recommended Super glue contact. This single-component glue quickly connects PVC and MDF, acts instantly, gives a durable seam resistant to solvents. Culed for 20 seconds, and the maximum strength occurs after 15 minutes.
Cost - about 90 rubles.
Silicone sealants
This selection is not the best for working with plastic, since the result of gluing will be short-lived. However, in this group you can highlight sealants to work with Barton's plastic. They are distinguished by high tensile strength, clutch for 5 minutes, complete drying occurs after 5 days.
Cost - about 300 rubles.
Liquid plastic
Liquid plastic can be used to stick only PVC corners. When used, it is important to abide care, as it is very difficult to remove the composition from the wallpaper. In this category it is worth highlighting Cosmofen glue. This is a high-speed composition of high strength. Resistant to ultraviolet, temperature differences. It is consumed economically.
Plastic corner - not too noticeable, but extremely important element When decorating walls and slopes. The many advantages of this material made it popular among private craftsmen and construction and commercial organizations. Affordable price Compared to metal products, it will allow you to buy a polymer corner element by saving your budget.
Polyvinyl chloride products have a number of advantages:
- Low weight allows installation on all types of walls.
- A variety of shades makes it possible to choose a color for any atmosphere.
- Does not absorb water and does not forms dampness.
- Easy to be installed, if necessary, quickly dismantle.
- Size variability is a weighty plus for different areas of the room.
- The polymer is stable for deformation, does not grieve, service life proper installation Not less than 50 years old.
Performs both aesthetic and technical functions. The variety of options allows you to embody any designer idea.
A variety of color solutions
The color palette has more than 70 shades. There are positions with imitation of wood and metal, so plastic corner Suitable for both High-tech and for classic design. Most often for standard premises try to buy a bar white colorShe is a kind of universal. While the white corner perfectly performs its main functions, masking the construction errors of the joints, and is also invisible after installation due to the neutral shade. Monophonic profiles An indispensable attribute in office and large production rooms, It is used to hide defects and protect the angles of walls, the planks are attached to liquid nails and merge with a shade of the walls.
Designers advise to select a shade on tone darker or in the color of the wall, however modern styles Often the game with contrasts turns out to be winning, so the scope for choice is another of the advantages in the piggy bank of plastic corners, moreover, with the correct installation, it will last not one dozen years.
Varieties of plastic corners
The protruding elements are the most fragile parts in the room are often subject to random mechanical impacts, so it is important to temporably and correctly pick up and install the framing, focusing on color gamut Interior.
The angle of polyvinyl chloride can be divided into several types of applications:
- External, masks the outer edges of the protruding elements of the room. Excellent copes with the mechanical effects of random strikes, especially during the interior furniture furnishings.
- Internal - applied at the joints of the wall or floor, performs the most part decorative function.
- The arched corner is indispensable when framing curvilinear joints. At the expense of its properties flexible element has popularity in non-standard designer decisions. What, in turn, has an indisputable advantage over metal products.
- Self-adhesive universal - based on the name is suitable for framing any adjoints. Due to flexibility, he can give any degree. Takes properties at room temperature, so in winter After transporting the material, we recommend that you wait at least two hours before installation.
This page presents positions from world leaders in the production of decorative plastic corners. Polish Cezar and Lemal and German manufacturer of universal self-adhesive corners.
Installation does not require special skills, produced on liquid nails. In the case of self-adhesive elements, it is necessary to break the tape and put a profile at the wall of the walls, you yourself regulate the installation location by means of an element bending, due to universality, suitable for any types of supporting structures.
How to choose a suitable model?
The world's leader in plastic finishing materials are Polish companies. Cezar and Lemal corners became famous for their durability, diversity color palette, performance.
CEZAR in its arsenal has a large range of monophonic, wood and metal shades. Standard dimension range:
- Equally (mm)
- Flexible arched versatile (mm)
- The length of 2.75 meters is released in packs of 25 pieces.
36 shades on the RAL catalog. In the product card you can choose the necessary color for you. Have compliance with all modern standards.
Colored plastic corners Lemal have double-sided embossing, so they can be used as internal and on external joints. Coloring is predominantly directed towards the decors, the color of the color of the wooden analogues.
- Equally (mm)
- Flexible arched versatile (mm)
- Lemal products have a length of 2.75 meters, are released in packs of 25 pieces.
Unlike competitors with similar price PolicyThe Polish products for disguise building irregularities are extremely resistant to temperature differences, sunlight and mechanical damage. By setting them once, you can be sure that they will retain the original color and will not require replacement the next dozens of years.
For those who are accustomed to practicality and want to facilitate the installation process, we present the corners of self-adhesive universal, the production of Germany. They easily take any degree, the composition of the material allows you to bind the angle in any direction.
- Equally plastic (mm)
- Corner plastic self-adhesive universal is released in rolls of 50 raven meters In white color. Thickness 1mm.
An important part of finishing works in the room is the protection of angular lines of walls from possible damage. Even after a qualitatively performed repair, the wallpapers on the corners, as well as door and window slopes, can quickly come into disrepair. It is recommended to strengthen the sections subject to wear using PVC corners. Consider how you can glue a plastic corner and how to do it.
PVC corners give repairs completed
Plastic corners are finishing elements that can protect exterior angles Walls from damage. They also perform a decorative role, attaching integrity and completeness interior.
Among the corners of PVC are considered among many species. They are universal. They are separated:
- door, window, arched openings;
- window niches;
- places where the walls are adjacent to the ceiling;
- external I. internal angles walls;
- the slots between the wall and the surface of the kitchen headset.
PVC panels are white, colored (with various shades and textures) and with bilateral color. The form differences:
- standard option (equilateral corners on the corners of the walls);
- T-profile;
- M-shaped (arched).
Why do specialists advise to glue plastic corners to wallpaper? Corner profiles from polyvinyl chloride are different:
- Durability. Products retain their properties for more than 25 years.
- Strength. Possess anti-corrosion properties. Sustainable cracking and abrasion. Not affected by humidity and ultraviolet.
- Simplicity of installation. They are easy to cut with a knife or scissors.
- Low cost.
- Unpretentious in care.
- Light weight.
There are also negative moments. PVC products over time are losing color. If the fire happens, they melt, highlighting toxic substances. They should be protected from damage to sharp objects.
Than glue plastic corner
To work done in vain, it is necessary to choose the glue that is best suited for plastic corners. IN building stores Wide selection of adhesive compositions. The trim of angles and slopes is carried out using such adhesives:
- Liquid Nails. The composition has a high degree of strength. Using liquid nailsYou can reliably attach a corner of PVC or polystyrene foam to any surfaces, in particular, to relief wallpaper, wood or concrete. The glue is characterized by excellent adhesive properties, quickly grasps. If necessary, the composition of a certain color is selected. White plates are better glued with a colorless makeup.
Liquid nails are often used when mounting the corners
- Polyurethane glue. Durable, elastic, tight gluits PVC and MDF. The instructions say not everyone glue composition Based on polyurethane designed for PVC corner. Significant minus - sharp smell and high cost.
- Silicone sealant. It is recommended for fixing profiles to wallpaper, plastic panelsas well as to ceramic tiles In the bathroom, in the kitchen. It is advisable to use acrylic sealant. True, applying silicone glue, over time, we can observe the weakening of the adhesion, especially in places where the corners are most often touched. Therefore, if you are gathered to fix the plate to the tile on silicone, the compositions with high adhesive indicators should be selected.
- Liquid plastic. The appointment of the composition is gluing solely parts from PVC. It works well with it, for example, when finishing joints plastic windows. Such glue needs to be used carefully, since to remove the mixture randomly falling onto the wallpaper, a special chemical reagent will need.
PVC profiles are self-adhesive. Glue the plastic corner on the wallpaper is necessary after the work of measurements. After that, a protective tape is removed from the product, plastic presses to the outer corner.
Tools for work
For fixing plastic needed adhesive Pistol. It allows you to accurately apply the composition used. You also need to stock:
- hacking or scissors for metal;
- stationery knife;
- metal as a metal coal;
- roulette, pencil;
- painting tape;
- adhesive mixture.
You can get the profiles of the desired size and form using the stouch. However, if this tool is not, nothing terrible.
How to glue plastic corner
To glue plastic corners to wallpaper or slopes, the surface should be taken into account to which the plates will be attached. On the wallpaper, the corners can be glued in two ways:
- Directly on the wallpaper. IMPORTANT: Wallpaper relief should be shallow, otherwise dust accumulate in the resulting gaps.
- With cutting strips and applying glue on the wall. To do this, it is necessary to attach a plastic corner to the place of installation, and then cut the wallpaper with a knife on both sides.
In the presence of curved slopes, flexible PVC profiles will be useful.
How to cut
Before gluing the corner, the required length is measured. Trimming at an angle of 45 degrees is carried out with the help of a sharp knife-scalpel or hacksaw. Also made blanks using stusl.
How to glue
If you need to attach plastic corners on the wallpaper, first the processed area is released from finishing material. The width of the cut strips should be slightly less than the profile width. Next, we work like this:
- on the inner side Planks apply the selected glue;
- polyvinyl chloride profile Apply to the surface and pressed over the entire length with a napkin or a dry cloth;
- plastic fastened paint scotch tape;
- after setting glue tape remove.
Before glueing a PVC profile on the windows or a doorway, it is necessary to investigate the surface for the availability of irregularities. If it is not possible to correct the defect, use flexible plastic panels.
When you want to glue corners between the wall and the bathroom, it is important that the surface of the bath side, which adjacent to the wall, was clean. To protect the tile from possible glue to it, you can use the painting scotch.
First handle the bathing bath and the adjacent section of the wall with an antiseptic agent and a degreaser. The next stage - filling the slots silicon hermetic. PVC corner is glued a day later.
How to glue an inner corner on the ceiling? During fixing products, it is important to avoid formation of cracks. If the glue composition performed, it should be removed. After installation PVC-Profil used finish putty.
Making preliminary marking, you must be as accurate as possible to prevent the slots between the joints. It is better to increase the length of the profile by 0.5-1 mm. Due to its elasticity, the panel will be perfectly in their place.
Before starting the installation of corners on the walls of the panel is cleaned of contamination. If the panel trim is uneven, it is impossible to fill with silicone. Gradually, areas with defect will cover dust and become noticeable.
To attach the arched corner, you will need a construction hairdryer. If after 2-3 warming up the profile did not succeed, further attempts should be stopped. Long heating makes material hard and brittle.
To properly take care of the interior design, it is important to pay attention to each of its details. Finishing windows and doorways - no exception in this regard. Decorate the openings I. give them aesthetic appearance Decorative plastic corner.
He will not only emphasize the clarity of the lines of corners, but also hobble disadvantages of plaster, If this was used as a finishing material.
What is this product?
This is the part of the fittings, Designed for decorative finish Window and other slopes, as well as to hide angular joints when using different materials.
Corners made from hard PVC The method of "hot" leaf inflection by special technology.
Scope of application
So that the idea of \u200b\u200bthe purpose of products has become more complete, it is a little more detailed to consider this question.
PVC Corners can be used in the following cases:
Pros and cons
Plastic Distilk Corner Like any material has its pros and cons, let's talk about more about them.
First about the pluses of products:
- allow you to close the angular adjunctions of various materials;
- smooth irregularities and form an angle of 90 ° in the places of finish;
- service life is 20-25 years;
- easy to handle when installing;
- you can choose the required color (corners are produced not only white, but also color)
- acceptable price, advantageous PVC corners on the background of wooden and metal products.
Minuses:
- weak mechanical strength - when cutting, the material can crack in the area of \u200b\u200bthe cut, the products are easily scratched;
- flavoring, heated and burning plastic highlights caustic smoke and gas.
Views and sizes
PVC corners can be divided, guided by two criteria: Application area and type of finishing. Below will be considered the main types.
By the nature of the appointment, the product is divided into the following types:
- Equilateral. This species is used mainly to give durability. Produced in size from 20x20 to 50x50 mm.
- Non-equilateral. With their help perform a finish arched Operactions. Dimensions - 5x17 and 20x25 mm.
- T-shaped products. Most often used to hide the joints between wall cladding and slope.
- Removable (with latch). Allow repair work without resorting to the dismantling of the profile. If necessary, it is enough to just bend it, and at the end of the repair, return the shelves in place.
By type finish, corners are:
- external;
- internal;
What glue to use?
One of the most effective options - Polyurethane glue. It is possible to use both a special adhesive for plastic corners and any other composition suitable for installation of PVC products.
When finishing sections with low load, you can use silicone-based sealant.
This glue is also used to fix corners to ceramic tiles In the kitchen or in the bathroom.
Another option is liquid nails. When installing bright products it is better to use a colorless composition.And for dark items will suit any option.
How to glue plastic corners on the slopes?
Installation of the corners should be performed only at the end of finishing works (sticking wallpaper, painting, etc.). Self the installation process is made in several stages..
First of all you need remove all protrusions from the surface, if any, be it plaster, putty, etc. If wallpaper is pasted on the wall, you need to remove them in the location of the corner.
Otherwise, it will be glued to the wallpaper, and not to the wall. Wallpapers should be cut off so that after mounting the corner between it and the facing, a space was formed. Next is the place of attachment of the corner degrease the weak solvent or White Spirit.
Corner must be applied to the wall and Apply a pencil label on it - at the top and bottom on the vertical parts and at the edges on the horizontal corners, which will be located between the slopes.
It is desirable to measure the vertical elements after gluing the top horizontal, and the bottom - after mounting the vertical. In this case reduced risk of gaps Between their edges.
According to the stamps cuts are made using metal scissors. The inner part of the corners is cut at an angle of 90 °, and the outer - at an angle of 45 °.
The glue is applied a narrow dotted strip on the inside of the product, closer to the middle, with gaps 1-1.5 cm.
Next need attach a corner to the surface and press well, then fasten it for a day with a painting ribbon or a scotch in several places. After the glue dries, the tape should be accurately removed. This installation is completed.
Sometimes during the repair and finishing work there is a need to close the disadvantages of plaster, emphasize the lines of corners or slopes. Modern market building materials offers many options for solving the above problems, but still it is worth saying that one of the most better options There remains a corner profile of plastic. This article discovers plastic corners, and how to use them to establish them on the slopes of windows.
So, a polyvinyl chloride corner is a device having an angle shape in cross-section, and, intended for finishing the corners and slopes to give them a more decent species.
Plastic corners are made of polymeric materialcalled polyvinyl chloride. In the process of manufacture, this material is strongly heated, after which is cooled. Thanks to such processes, polyvinyl chloride profiles have a flat, smooth and solid surface.
Application area
Thanks to a large number positive PartiesPolyvinyl chloride profiles have won great popularity in many areas of application. Next will be considered when there is the possibility of using plastic profiles.
- If there is a need for registration window slopes From the inside and outside. Such a need is always, because without plastic profiles, all the space around the window, and the window itself will not look very carefully.
- When you need to make the door slopes.
- Also, the angles are used to protect the corners of the premises, the walls of which are plated by wallpaper. According to experienced builders, It is from the corners that the lag of wallpaper begins, since the heater is constantly working, or a fan. And it is from the corners, under the action of a jet of air, wallpapers begin to spawn. To this not happen, it is necessary to protect the angles with plastic corners.
- If the corners of the room are formed plasterboard sheets, then you need to fix them. For this again, this material is used.
- In the process of making furniture.
This is another incomplete list. As it has already become clear plastic profiles Used in a wide variety of purposes.
Dignity
As already mentioned, plastic angles For slopes, has a number of advantages that will be listed below:
- Ease. Indeed, this material has a small weight.
- Price. Plastic they cost cheaper than other materials that apply for the same purposes.
- Cutting In the process of mounting, unnecessary parts need to be cut off, and it is done very easily, as plastic profiles are easily cutting.
- Fastening. They can be fixed by self-drawing, glue or putty. In any case, the mount will be high-quality.
- Color. It has a large number of Flowers, so the consumer at its discretion can choose a profile of a color.
- Durability. The service life of the material from plastics is a little more than 100 years.
- Finish. Plastic angles do not require subsequent finishes, and this in turn saves funds spent on repair finishing work.
- View. Slip windows, seams, arches, decorated with this material, will have a neat and completed view.
- Protection. As already mentioned, the material will perfectly protect the angles from mechanical damage, and contributes to the wallpaper not to be dug.
That's how many advantages have this material. All this contributes to such a high level of popularity of plastic corners in the building materials market.
Views and sizes
Plastic profiles for slopes can be classified according to the following parameters:
- Depending on the purpose of use. In this regard, the corners are divided into 4 species.
- Equalobocy. This type is most often used to strengthen the slopes. Dimensions are 20 × 20, 25 × 25, etc. up to 50 × 50.
- Equality. This type is used for arches. Dimensions are 5 × 17, 20 × 25.
- Profile in the form of the letter T. It is most often used to hide the place of the junction between the walls of the wall and the slope.
- Removable. These profiles are an ordinary profile, but during repair work It can be easily bent, instead of dismantling. After completing the repair, it is necessary to return the shelves to the place again.
- Depending on the type of finishing, plastic angles can be classified as follows:
- Exterior angle. This type is made with an angle of 90 degrees or 105 degrees.
- Inner corner
How to choose a plastic corner for slopes
When choosing these materials, attention should be paid to the following things:
- Separate angle.
- Part size and their length.
The most common sizes are considered to be 20 × 20, 30 × 30, 40 × 40, and 50 × 50. And the most common angle is considered to be 90 degrees.
Approximate value
Prices for plastic profiles for slopes vary greatly from 18 rubles to 77 rubles. It depends on the size of the material and the purpose of use.
For example, a corner of 2.5 meters long, and the dimensions of 100 × 150 mm cost approximately 75 rubles per piece. And profiles that have a size of 10 × 10 mm are approximately 18-20 rubles per piece. There are those that cost 27, 24, 35, 45 rubles.
How to set profiles on the slopes of windows - step by step instructions
The installation of plastic profiles is a completely easy lesson, so you can cope with this business yourself without the help of professionals. But, nevertheless, everyone should be done carefully and in accordance with the rules. You can also follow the following step by step instructions:
- Preparation. Before proceeding with the case, you need to make sure that the following materials, and tools are available:
- Scissors for metal.
- Pencil.
- Scotch.
- Mounting glue.
- If there is a room high level Humidity, it will also be needed a special silicone sealant.
- Plastic corners.
- Preparation of the surface.If all tools and materials are available, then you can proceed to the preparation of the surface. Wherein special attention It is necessary to give the following:
- On the surface it is necessary to remove all protruding elements, such as nails and others. This will only be interfered in the future.
- The surface must be burned with plaster.
- The oily surface must be excluded, so it is recommended to use the solvent.
- If there are plastic profiles on the spot where the plastic profiles be glued, they will need to trim, as they are not recommended to glue directly on the wallpaper.
- Preparation of plastic corners.Now it is necessary to prepare the profiles themselves. To do this, put them to the sides and measure their dimensions. Starting standing from the top, then the side, and then the bottom side. During the measurement process, on the same corners themselves, it will be necessary to mark the pencil of the line corresponding to the desired size. Then, on these lines, it will be necessary to cut the material using metal scissors. You need to cut carefully so that all sorts of irregularities and notes remain. After that, you can proceed to last stage Total process.
- Installation. This is the most responsible moment, therefore should be more attentive.
- You need to apply glue to the inside of the profile using a special glue gun. At the same time, apply it closer to the center. Distance between drops should be taken at 15-17 mm.
- After the glue is applied, you must attach a polyvinyl chloride profile to the slope. At the same time, it is necessary to press it at all sites evenly, so the help of a comrade will not hurt. After it is glued, you need to remove the excess glue and take a scotch profile. This is done so that it does not disappear before the glue drying.
- Then after a day you can remove the tape. You can leave for a few days so that the glue is finally dried.
That's all! The entire procedure for the establishment of plastic corners on the slopes is finished.