From time to time, everyone wants to update their home, make repairs, replace doors. Although the last point is not entirely required. You can just limit yourself to painting them. This process is quite simple, if, when choosing a paint and a method of staining, take into account the material on the basis of which the door is made, and the duration of its operation.
Features of painting doors "Canadian"
Laminated door
A distinctive feature of laminated doors is a smooth surface. A layer of paint falls on it easily, but, unfortunately, does not last very long.
- To solve this problem, the first step is to remove the top coat containing the varnish and impregnation. For this purpose, you can use grinder and zero sandpaper. It must also be remembered that under protective layer there is a chipboard: with deep processing, it begins to crumble with ease.
- The treated surface is wiped with a solvent.
- A mixture of primer and antiseptic is applied to it.
- After this protective layer has dried thoroughly, you can start applying the first coat of paint.
- For such work, you can choose any composition, since as a result of grinding, an ordinary chipboard is obtained, for which all paints are suitable for processing. Application is carried out using a spray gun or velor roller.
- After waiting for the first layer to dry, the whole process should be repeated from the very beginning.
- A layer of clear varnish is applied every other day: it will protect the surface during its operation.
Iron door painting process
This work belongs to the category of the most problematic, since iron doors are the most difficult to paint. Therefore, the choice of the coloring composition must be taken responsibly. Interior paints in this case will not work - they fall poorly on an iron surface. More suitable option are pentaphthalic (PF) compounds. They are made specifically for painting iron and wood surfaces. The disadvantage of PF compositions is the excessive simplicity of the presented colors, lack of luster. But when applied to an iron surface, you can be sure that the door is completely painted over.
Before applying paint, it is advisable to cover the door with a layer of matching primer. Through this technique, you can achieve better coverage surfaces: paint adheres to the primer much better than to iron. The use of a spray gun during operation greatly simplifies the whole process.
Metal doors
Painting significantly improves appearance metal doors.
- Before starting work, the door surface must be thoroughly cleaned using a sponge soaked in gasoline or solvent. If there is rust on the surface, it can be removed using a special composition based on a mixture of chrome salt and zinc.
- Weld seams can be removed with a metal brush or a special file.
- After that, the door surface is covered with a primer: it will slow down the corrosion process and will contribute to better adhesion of the paint to the surface to be treated.
- The best choice for coloring metal structures There are three types of paints: acrylic, enamel and pentaphthalic. For work, you will need a spray can or a special brush.
- In the case of smooth surface treatment total area the doors should be divided into small squares and the staining process should be started from the upper left corner. In this case, a three-layer paint application is required.
- When processing relief surface the dyeing process starts from the inside towards the outside.
Veneered doors
Veneer is a rather demanding material. First of all, it is necessary to decide the question of whether to preserve solid wood or repaint the door completely in a different color.
- In the presence of small scratches and other defects, you can limit yourself to simple varnishing, and then thoroughly rub the door surface with polish.
- In the case when a complete change in the color of the structure is required, it is necessary to provide for the need for additional work.
- All irregularities are eliminated by applying a special primer.
- Most suitable paints for veneered door surfaces are water-based, polyurethane or glyphthalic paints. The best option are water-based paints.
- In this case, the use of nitro paints is inappropriate, since they deteriorate under the influence of moisture and a short time covered with a variety of matt paints.
- Painting can be started after the primer is completely dry.
MDF door painting process
To paint these doors the most the right choice are formulations that contain varnish and tone. The application of such a paint helps to preserve the structure of the door and to give the surface an aesthetic appearance. Lakobeyts, or, as it is also called, stain-varnish, is perfect for such work. It is a colored varnish made of nitrocellulose, organic solvents and auxiliary components. The main advantages of the substance:
- perfectly fills the substrate;
- due to its liquid consistency, it penetrates deeply into the pores of the material;
- characterized by high adhesion to the surface and a short drying time.
- contains special pigments that create a barrier that guarantees excellent light fastness;
- possesses increased water-repellent properties.
The combination of varnish and tone in one composition allows you to first tint the door, then varnish.
The presence of a specific panel pattern complicates the task uniform application varnish. Therefore, it is advisable to engage in such work with a certain professional experience. When using a brush, there is no need for any special skills. All that is required is to be careful and, if small smudges form, immediately remove them.
To prepare the surface for further painting, it is necessary to eliminate excess particles from the canvas by wiping damp cloth or a washcloth
Painting of paneled doors
Currently, the most common are two ways of painting such doors.
- The first is that the paint is first applied to the door ends. After that, the damaged areas of the panel are carefully cleaned and a new layer of primer is carefully applied. After it is completely dry, you can start painting. A two-layer paint application is optimal. When applying stain or varnish to the surface, strictly follow the manufacturer's instructions. Application this method most appropriate when processing doors with a smooth surface.
- The second method is tinting door panels. Its use is convenient when the surface has a wood texture. To mask flaws in wooden surface the use of a white shellac-based primer is recommended. For creating color shade you can use a stain.
When painting the surface, regardless of the material, it is necessary to use brushes or fabrics of exceptionally high quality.
Primed doors
This option is the simplest. The door leaf is fully prepared for further painting. All that is required is the preparation of the paint itself and the tools. For processing uneven surfaces the door pattern requires a brush, and flat surfaces are processed with a roller.
Particular care must be taken when painting doors with glass inserted in them. In this case, the edging of the glasses should be pre-glued with paper tape. This measure is necessary to prevent the ingress of paint.
Does the old door no longer look the same? Do not despair, it can be easily restored with your own hands, without significant financial investments.
In this case, a simple surface painting is used, after which the view will be improved, you can also use a template that will give a regular door wooden view... But before you start painting the surface, you need to know which coloring material is suitable, and then find out how to paint doors under a tree.
Choice of paint
Based on what exactly will be done with the door, it is necessary to choose the right way to paint the door. In this case, there can be two methods of work:
Important! When choosing paint for painting doors, it is better to give preference acrylic composition on the water based... You can use the mixture for application with a brush, and in terms of consistency, this mixture will be the most optimal. If the wood will be in the bath, then it is better to use an alkyd compound that can repel water.
How to paint a door with your own hands (video)
Surface preparation
Having picked up the necessary materials for painting doors under a tree with enamel, you will need to prepare the surface, and then apply a pattern of the structure of wooden fibers. It is always necessary to prepare the surface by removing old paint or varnish using a sander or sandpaper.
To paint Canadian wood-like interior doors, as well as other types, it is necessary to bring the surface to an ideal state. To do this, use a sander or sandpaper, with a small or medium grain. In the presence of cracks, pits or other flaws, it is necessary to additionally putty the surface with a composition for wood. This condition is mandatory, but using a transparent varnish, the color of the putty should match the color of the wood itself. When the mixture dries and hardens, it must be sanded. After that, the preparation is over and you can proceed to staining.
It should be noted right away that the imitated wood pattern can be applied to almost any material. It can be a metal entrance, plastic or plastic, on a steel sheet, etc. the main difference lies in surface preparation.
Door painting
The door is painted using the following technology:
- White dye is used for the canvas and the surface is completely painted.
- After that, you need to cover the material with liquid soap. Before you paint white door under a tree with your own hands, you will need to leave the canvas to dry the base layer. As a rule, the drying time is indicated in the instructions.
- Next, you need to use dark enamel and cover the surface with it to make curls, like wood fibers, while washing off the liquid soap. Dissolved enamel dries up after work and makes the necessary pattern.
An interior walkway made from real wood is expensive, so you need to consider the option of creating an imitation on plywood. In this case, you will need an additional brush. With its help, the canvas is "combed" along the soft fibers. Then it will be possible to paint the surface in any color from white to dark. Further, the applied dye will spread and make the desired texture, which will remind a real fiber.
For plywood, it is better to use several shades at once, as this will allow you to make the desired pattern. When the enamel is dry, the plywood is sanded. How to paint steel door wood grain can be seen in the video, although airbrushing can also be used.
In conclusion, according to the information described, it should be noted that the creation of imitation of wood fiber allows you to emphasize home comfort... Regardless of different materials, General requirements there is still, the main rule is choice suitable materials for work. For example, if you just need to emphasize the fibers of a real tree, then it will be enough to use impregnations. When using varnish as a finishing material, stain is used, but not drying oil.
It is also necessary to remember that many materials perfectly absorb paints and varnishes, therefore, surface treatment in 2-3 layers may be required. It is recommended to use the color "Alder" for interior doors, excellent for him the door will fit Canadian. If the interior is dark, then it is better to use the color "Wenga".
Photo gallery of finished works
Now one of the budget options for doors is the Canadian door. It is not expensive compared to a wooden door, but it has an impressive view. Many people install such doors in their apartments and houses. But they are only sold in white tones, covered with white soil. Therefore, after installation, this door option must be painted. And how and what to paint the Canadian door, we will consider further.
Considering that the Canadian door itself is not particularly strong, painting will not only give it a decent appearance, but also strengthen it. In addition, if such a door is not painted, then over time it will be scratched and covered with spots a tone darker than the coating itself, and in places where friction occurs most, the base of the door will begin to shine through. The door itself is a densely pressed cardboard, so it lends itself to staining.
What paint is suitable for painting Canada
Let's immediately divide the paints by the type of structure: glossy, matte and semi-matte
Glossy finish will accentuate all irregularities and imperfections door leaf, therefore, when there is a choice, glossy paint better not to buy.
An excellent option for painting such doors would be a semi-matte paint texture. It has some shine, but it won't highlight all the irregularities. But when choosing, keep in mind that each of the manufacturers allows for a different gloss. Some have more, while others have less.
Matte paint is also well suited for painting a Canadian, almost all flaws will hide under it, but not everyone likes it. Not many people want to see a matte door in their home.
We select paint by composition
If you answer the question in one sentence, how to paint a Canadian door, then, say, it is suitable for this, be some kind of paint for wood. An excellent choice would be water-based and acrylic paints, which can be tinted. The oil coating on such a door does not look very nice. It is possible to apply varnish, only it must be matte.
Door paint options canadian
We paint the door and door frame with water-based latex or acrylic paint by simply applying it to the surface. The door frame and platbands are primed in advance. After painting, the texture of the door and the frame will look the same.
Oil stain is applied to the door leaf, after a while the excess stain is removed with a linen rag. Where there is more stain left, a wooden texture will stand out, in appearance resembling natural wood... After the stain dries, the door leaf is varnished. The door frame and platbands are treated with the same stain and varnished. After this process, the Canadian door looks just like a natural wood door.
Pre-treatment of the door before painting
Mostly Canadian doors do not require additional processing... It is enough to clean them of dust and dirt, and then you can start painting. Even minor scratches equal under paint coating and will not be noticeable. When there are large flaws on the surface, then these places are painted over with a layer of paint, and after it dries, they are cleaned with a fine sandpaper comparing the edges. After that, the door leaf is painted over with a roller. And the embossed areas are painted over with a brush. If the paint is sparse, then two layers of coating should be applied.
How to paint a Canadian door
For painting, you can use a brush, roller or spray gun. If the door is painted in the installed state, then it will not be possible to paint with a spray gun. Therefore, you will have to use a brush and roller. The Canadian door is painted quite simply and anyone can do such work. Do not forget that the defective areas should be painted over and sanded before the main staining.
Outcome
Now you know how to paint the Canadian door and whether it can be done. If you have not heard about such interior doors then pay attention to them. Canadian can be great budget option for repairs in your apartment or house. The appearance at these doors is quite decent, and if desired, they can be made similar to natural wooden doors... In addition, by painting all the embossed places with a different paint color, you can generally transform the door leaf.
Among the many questions about Masonite doors, also called Canadian doors, the most common is the question of their color. In most cases, Canadian doors are supplied and sold in white, so over time, dark spots inevitably appear that require painting.
In addition to dark spots on canadian doors also appear different kinds scratches, and in the corners - scuffs through which the base of the door appears. All these defects do not give respectability and sooner or later the understanding comes that it is time to get rid of them.
Canadian doors belong to the budget class of doors, they have their own advantages and disadvantages, among which the low strength of the outer coating comes out on top. What to expect from textured MDF, which is, in fact, compressed cardboard? But it is precisely this coating that makes the coloring of "Canadians" available to everyone - even the most unprepared people can produce quite high-quality painting... Let's figure out how to do this.
What paint to paint canadian doors
The low-end door segment implies poor build quality. We are not talking about the quality of the gluing, the materials used, the ecology - in our case, the evenness of the door leaf and the evenness of the joints of the frame, which are hidden under the MDF, come to the fore. Both are "lame".
All paints are divided into glossy, semi-glossy and matte. Glossy, glossy paint emphasizes all surface irregularities and imperfections. And even, it would seem, quite Smooth surface may, after applying glossy paint or varnish, take a not quite expected look. In the case of Canadian doors, the joints are sure to show through door frame and other irregularities that were not noticeable before. From all of the above, the inevitable conclusion follows:
when painting canadian doors DO NOT use
GLOSSY PAINT
Semi-gloss paint with a low sheen can give the best result, but the different manufacturers gloss is different and this point must be taken into account. Matte paint will generally hide all the irregularities, but many people do not like the matte surface - it all depends on personal preference.
Going further - what kind of paint is suitable for painting Canadian doors? Masonite doors can be painted with any paint for wood. Excellent result gives a waterproof water emulsion and acrylic-based paints. You can add dye to them and get the desired shade... Had to see doors painted oil paint- to be honest, they don't look very good, although this is a subjective opinion. And once a batch of veneered "Canadians" covered with a glossy shiny varnish was brought to the door shop, in which the author of these lines worked at one time. They sold out with difficulty - as you understand, all the irregularities and joints were emphasized. Therefore, if you decide to use a varnish, then you need to use a matte finish. Such varnish is worth, however, more expensive than glossy.
If you were expecting to hear the specific names of paints, then if you please, there are many good reviews on the Internet about the use of Pinotex paint. This is an expensive branded paint and we can say with complete confidence that all paints of this level will give a good result. Whether it is worth spending money for such paints is up to you. But, believe me, sometimes this is not necessary - Canadian doors can be painted with less expensive paint, the one that is available in your region - just talk to sellers and listen to their advice. The covering power of the paint should be taken into account - it differs from manufacturer to manufacturer and when using paint with poor coverage it may be necessary to paint in two coats, which will increase costs.
Do I need to handle Canadian doors
No special treatment is required before painting the "Canadian". If there are no significant defects, painting can be started immediately after cleaning the door from dust and dirt - standard requirements for any painting. It is advisable to try on small area apply a test coat of paint and make sure everything is ok, the color and gloss are fine.
If the doors contain small scratches, then in 90 percent of them they are perfectly hidden under a layer of paint and are masked by the texture of the door trim. If a scratch protrudes above the surface of the door, then it can be painted over, wait for the paint to dry, sandpaper, leveling the edges with the surface of the canvas, and only then complete painting. Nothing new, in general, also standard actions.
How to paint Canadian doors
And the last thing - how to paint the doors. It is unlikely that you have an atomizer, so remain standard options- natural bristle brush and roller. The texture of MDF, hiding minor flaws, together with the use of paint without gloss, will allow even an inexperienced person to paint the doors with a fairly high quality, which was already mentioned at the beginning of the article. It is only worth noting that you first need to paint over the places with defects with a brush, and only then start painting the entire door as a whole.
During the period renovation works in a large number of options, doors are replaced or painted. In the repair, the question always arises of how to paint the door of a Canadian, for example, as the most usual variant, or an interior door made of another material.
And the most interesting thing is that the multifunctional answer to this question no, but about everything in stages.
Photo of a painted door, which is now definitely suitable for the interior style
From material to painting
In fact, painting door structures is an incredibly ordinary process and everyone can master it without any painting skills.
You can immediately highlight that, regardless of the material, the door is constantly painted according to specific rules:
- The system must be removed from the hinges.
- All accessories are removed from the canvas.
- Other components, such as glass insert panels, can be with my own hands cover with foil for protection.
- The cover that is already outdated needs to be removed, for this there are several options.
Veneer
Any kind of material from which the door leaf is assembled has its own painting needs. Let's start with veneer and consider how to paint a veneered door, considering that veneer is a very demanding material.
Here you will need to adhere to a specific step-by-step work:
- All small defects or unevenness of the array must be covered with a specialized primer mixture.
- We proceed to the painted work when the primer dries.
You can also prime the entire veneer array
As for the paint directly, the veneered material must be painted with three types of paint:
- Polyurethane.
- Water based.
- Glyphtal enamel.
The main thing!
Nitro paint is not suitable for application, since it cannot tolerate moisture, and the reaction to moisture leads to the fact that the door leaf becomes covered with matte stains.
Laminated canvas
From the point of view of uniform rules, everything in the version with a laminate remains unchanged, but before painting a laminated door with paint, you will need to do some more preparation work:
- The laminate is removed from the canvas using fine sandpaper.
- The entire surface is sanded in a circular motion until it is matte.
- Then a primer is applied.
- After the primer has dried, all imperfections are putty with a specialized mixture, wood putty.
- All putty parts are polished and primed again.
Putty with a specialized compound for wood
Each of the offered paints is suitable for coating with paint:
- Acrylic.
- Acrylate.
- Oil.
- Nitro paint.
The main thing!
Any of the proposed methods must be mixed well in advance and much better with a mixer, this will make it possible to avoid stains.
The instruction implies that the paint is applied in several layers, which can be applied with a roller or spray gun. And by the way, in another version, you need not only highly professional work skills, but also suitable conditions climate, otherwise the paint layer will come out thick.
Hardboard
But the question of how to paint hardboard doors constantly arouses interest. And all because fiberboard can absorb more than plain wood, and therefore, before painting, it is imperative to apply a primer mixture or drying oil.
Without it, the consumption of material for painting can become 4 times more, and the surface itself will come out anyway, unevenly covered with paint. And for coating with paint after priming, oil, water-based, alkyd and acrylic-based paints are perfect.
Hardboard door before painting
The main thing!
When applying drying oil, it must be heated to a temperature of at least 50 ° C, and applied only in 1 layer.
Doors of this kind can be in the bathroom and indoors, because they are accessible, simple and there is only one difficulty in painting. Since the fiberboard plate is absolutely always with a microrelief, it is not easy to paint it with a roller or brush.
For work, you will need a spray gun or a roller with a fur coat, you can even spray cans with dye, this is the only way an identical layer will come out over the entire plane of the hardboard. Electrically conductive paint Zinga is definitely not suitable for this type of plane, which is designed to protect the metal and leave its ability to conduct current, but others, as stated above, will absolutely perfectly fit on the fiberboard canvas.
Canadian
Returning to the most common type of doors, which are designated as "Canadian", it is necessary to emphasize that alkyd dyes are perfect for them.
You can try other types of paints for finishing works but not all fit, some may flake off. Also, for example, fire-retardant paints for metal Polistil, or other non-standard materials, if desired, should still be used for their own intended purpose.
Simple canvas, simple coloring, in this one is the "Canadian"
As a rule, it is possible to use glazing (light-transmitting) compositions, they make it possible to refresh the surface of the Canadian and give it the appearance of a new product. True, this should be done only if there is a skill.
You can use special compositions "for wood", but for any you need to first decide what appearance of the faced door is necessary after all the work is completed, under gloss, mat, continuous or with structure.
Perfectly apply a couple of layers to the surface of the canvas
What about monetary side question, then the cost of work must be adequate, in the sense that sometimes what is the point to save. Another staining, together with the dismantling of an ancient, unsuccessful layer, a primer mixture and impregnation, will cost more.
And therefore, the material is chosen not according to the rule "the cheaper, the better", but if we proceed from the compatibility of the canvas and the dye.
Conclusion
Painting the door leaf, as it was, is a very common process, but the selection of material requires attention. On the other hand, a good approach to the selection of materials guarantees a good effect. And by looking at the video in this note, you can adjust the coloring information and choose the right materials.