How to ennoble the front door from the inside, if its condition does not inspire delight? Design flaws from the outside are not as terrible as from the side of the room, because each element of the interior must be impeccable so as not to spoil the overall picture. What to do in this case?
There are several ways to transform an old door.
First of all, you need to take care of the completion of all draft work. This is especially true for newly installed doors, because you need to complete the work and mask the mounting foam to prevent its destruction under the influence of ultraviolet radiation. You also need to close the gray wall, level its surface and decorate the opening. It is also important to ennoble the canvas itself, especially for nondescript metal and old models. Update worn hardware. Do not forget that interior doors must also be in perfect condition. So, let's consider in order how to update the front door and do it all with your own hands.
slopes
First of all, to give a finished look to the doorway from the inside, you need to take care of the slopes. This is a prerequisite, regardless of which doors you are repairing entrance or interior doors. Various materials can be used to complete the slopes:
- drywall;
- plaster;
- plastic panels;
- MDF or wood;
- metal carcass;
- laminate.
New slopes will make the door more attractive
How to ennoble the front door with drywall from the inside with your own hands:
- Clean up debris and seal any cracks.
- Apply a layer of cement plaster and glue cut-to-size sheets of drywall onto it. If the irregularities are significant, a metal frame is used for installation.
- Cover the joints with putty, additionally using a sickle.
- Prime the surface.
- . After you can paint them in any suitable color or paste over with wallpaper.
If you decide to transform the entrance with overlay panels, mount the frame in advance. Under the bottom you can lay a heater. Panels are installed both vertically and horizontally using the rack method.
platbands
Since you decided to ennoble the doors, you need to take care of their framing. We are talking about platbands on the entrance and interior doors. Usually they come in a kit along with other details of the design of the opening. If you purchased only the canvas and frame, you can easily buy the matching colors separately. They can be made of metal, MDF, wood or pressed paper. Depending on the design, the methods of fastening also differ. You can nail them with your own hands on nails without hats, put them on liquid nails or mounting foam. The best option is telescopic platbands, which are attached directly to the box using the tongue and groove method, but they are more expensive.
Stylish platbands will help transform the interior
If you decide, also do not forget about the platbands. If desired, they can be made with your own hands using wood blanks. To give them the desired shade, use stain and varnish or paint. It all depends on the style of the room and the type of door. Usually the color is matched to the tone-on-tone canvas or skirting board, but you can play in contrast if it is appropriate.
Web coating
How to ennoble an old metal door with your own hands? You can use one of the following materials:
- dye;
- varnish enamel;
- self-adhesive film;
- laminate;
- veneer, PVC or eco-veneer;
- thin MDF panels.
Before applying the coating, you need to clean the front door of dust, rust and thoroughly degrease it. Then it is desirable to apply the primer and only after it has dried, begin work on the cladding. MDF panels are attached with glue or with a frame. The adhesive is very easy to apply with a soft spatula. Painting methods are self-explanatory. But laminate, PVC and veneer need to be fixed by hot pressing. Such work can only be performed in a horizontal position of the door.
Options for the outer covering of the door leaf
And how to transform old interior doors? To do this, you can use the same methods as for the input, as well as others. For example, decorative inserts. Initially, the surface is processed by one of the above methods. Then you can decorate the canvas with glass fragments, colored plastic, stained glass windows or mirrors.
Soft upholstery
An old metal door can be transformed not only visually, but also qualitatively with the help of soft upholstery. For this, dermantin is most often used. To create volume, a layer of insulation is laid under it. Thus, you will be able to kill two birds with one stone: you will decorate the canvas visually and provide better heat and sound insulation.
A quick way to transform an old door is spectacular soft upholstery
How to ennoble the coating of the entrance metal door with your own hands:
- Remove the canvas from the hinges and lay it horizontally.
- Measure its dimensions and cut out a piece of leatherette with a margin of 15-20 cm on each side.
- From the insulation, cut sheets to fit the size of the door.
- Glue the insulation on with superglue. Try not to leave empty joints. You can plant the material on the mounting foam.
- After everything dries, start working with dermantin. Tuck the edges in so no cuts are visible.
- Fix the upholstery with glue, and you can use furniture nails and decorative cord to add texture. They need to be hammered into the substrate material, so you can install denser elements in advance according to the scheme.
This method of decoration is also used for wooden doors. In this case, things are even simpler, because you can use a furniture stapler.
An important point: since we are talking about finishing from the inside, it is not necessary to make rollers for sealing the porch, because there will be no sense from them, and they will only spoil the appearance.
Interior doors
Interior doors require much more attention. They can be made from various materials, which must be taken into account when finishing them. How to improve newly installed interior doors? To do this, you need to perform the same manipulations as for the input. That is, first of all, it is necessary to carry out the final finishing of the opening:, platbands, close up all joints and cracks, arrange slopes. In most cases, you can limit yourself to completing the door or simply plastering the opening. For more expensive and sophisticated repairs, decorative panels should be used. If the canvas is far from new, you need to slightly refresh it.
Doors can be given a touch of antiquity and it will become the most stylish element of the interior.
How to ennoble old interior doors with your own hands:
- paint;
- paste over with wallpaper or self-adhesive film;
- cover with stain and varnish;
- use thermal pads (veneer, PVC, oracal, laminate);
- cut glass inserts.
You can use special decorative techniques, such as decoupage or artificial aging. This decor looks especially impressive on a wooden door with figured panels. Another similar technique is craquelure. For this, paint or varnish with special properties is used. First, the canvas is opened with a layer of the usual composition. After it dries, craquelure is applied. When dry, it becomes covered with cracks, tearing off the bottom layer. It looks very impressive. In order not to be too catchy, you can use this decor method in separate areas, for example, in combination with decoupage.
It doesn’t matter if you are transforming old doors or ennobling new ones, the final look depends only on your imagination. Moreover, all this can be done at minimal cost.
Do not rush to dismantle the boring old interior doors and change them to new ones. Consider updating them, as there are many ways to decorate and restore old furniture that apply to door panels.
Decorating doors from fiberboard
Process step by step:
- If the door is completely slanted, it must first be removed from the hinges and the old fittings removed. New handles, locks, latches in the same style on all interior doors will be the first step towards updating them.
- So the door was removed. Now you need to remove the old paint. Use a building hair dryer and spatula.
- After that, cracks and scratches are sealed with special putties and putty.
- Wait for the surface to dry and sand it.
- Cover the canvas with drying oil, which will prevent its deformation under the influence of moisture.
For a visual performance, see the video:
The door is ready for the actual decoration. The easiest way is to cover the door leaf with colored paint or varnish it. Next - room for imagination:
- make a drawing using a stencil;
- paint the moldings in a different color;
- stick moldings if they were not there or imitate with paint.
A variety of applications - fabric, paper, vinyl, leather, photo wallpaper - will turn an old door into a new one - original, stylish and unusual.
Decorate an old bathroom door
Before you start decorating the door to the bathroom, you need to consider an important point. Since there is constantly high humidity in the room, the coating that you apply to the door, or rather, to the inside, must be resistant to this factor.
How to prepare the door leaf is described in the previous section of the article. In short: you need to remove the old layer of paint from the door, sand, putty and prime the surface. If there are no slats, they can be bought and attached to the door. Having painted after that everything in one color, you will get a whole picture.
An excellent option for a bathroom door is to install a full-length mirror in a frame of slats. If it is flexible, plastic, the installation process will be quite simple, but the effect will exceed expectations: beautiful, practical, and useful.
The mirror can be replaced with a mosaic, a special vinyl sticker, and even a piece of wallpaper (only washable and moisture resistant). By experimenting with materials and colors, you can make an old bathroom door stylish and special.
How to decorate old glass doors
The first option that comes to mind when thinking about decorating an old door with glass is stained glass. What is needed for this:
- water-based stained glass paints;
- black paint - for the contour;
- thumbnail image.
Transfer the drawing to the glass, outline the contours with a thin black line, and after drying, proceed to decorate the elements with different colors.
You can make the work even easier by simply buying a special film that imitates a stained glass picture.
One of the door decor options with glass in the video:
Stained-glass windows allow you to make even an old door unusual and stylish.
If the old glass in the door was transparent, it can be made frosted. To do this, you will need to purchase liquid glass (1 liter will be enough, its price does not exceed the cost of a chocolate bar or a cup of cappuccino), which will need to be mixed with crushed chalk (or tooth powder). The resulting paste is applied to a fat-free, even surface in 2 layers.
An easier way is to stick a special film or buy a ready-made matting paste.
Choose your option for decorating old doors, and you will see how easy it is to update the atmosphere in the apartment with your own hands and at no extra cost.
Despite their unlimited service life, they wear out quite quickly. The material suffers from deformation and drying, coatings are erased or become faded.
It is possible to replace such canvases with new ones, but this is a big expense, a waste of time for replacement, subsequent repairs after they are installed.
Therefore, it is easiest to put these structures in order on your own, that is, give them a second life by updating their coating and eliminating defects. How to restore old doors? More details later in the article.
To properly and efficiently restore doors, you need to know how it's done.
Typically, interior canvases suffer from mechanical stress and moisture.
Plastic varieties are more prone to scratches.
To make them invisible, they must be gently polished.
- Painting. A wooden door or one with veneer inserts is easiest to varnish or paint. It is better to paint a wooden surface using a special brush or spray. The wooden surface should be painted and varnished by running a brush along the fibers, then the material will lie flat, filling in all the bumps, chips and other defects.
- Decoration. To give the updated canvas brightness, you can use other shades to create a new image. You can paint the canvas in one color, and the protruding parts in another, contrasting with the main selected shade. If the surface is smooth, then it is recommended to use carved slats made of wood or polyurethane, sticking them on the surface to be treated, after painting them in a suitable color.
- Pasting using roll wallpaper, colored paper or fabric. On a smooth canvas, it is often offered to stick special photo wallpapers, which are sold in a store or easily purchased via the Internet. Decoration can be styled to match the room. For the nursery, drawings and reproductions from children's magazines are selected. For the kitchen, choose pages with dishes or vegetables and fruits. Before gluing paper sheets, they must be held in water, then PVA glue is applied to the entire sheet and glued to the canvas, smoothed thoroughly. After the paper and glue have dried, the surface is covered with a colorless varnish so that the work lasts longer. In the same way, you can paste over the surface of the old material with a cloth.
- Vinyl stickers. When pasting with vinyl stickers, it is not necessary to clean the canvas of old paint and eliminate irregularities. Stickers will hide all defects, and you can paint after that. They must be glued on a degreased surface, cleaning this place with an alcohol cleaner. Remove the backing from the sticker and apply to the work area, smooth it thoroughly. Only then can you remove the film that protects the front side.
- Groats decorations. An original way to decorate an old door is the image of drawings made from bulk materials. Rice and buckwheat are ideal for this. Grains should be glued on PVA glue or standard wallpaper. After the drawing dries well, the canvas is covered with several layers of colorless varnish. Dry cereals, and even under a layer of varnish, are stored for a very long time.
With a little effort and imagination, it will disappear how to restore old doors at home. Updated interior doors will give the home warmth and comfort, as well as improve the interior of the apartment.
Renovation of an old door with glass
How to restore old doors with glass is not an idle question at all.
Glass becomes cloudy over time, acquires scratches and, therefore, when updating it, it must be restored or replaced with a new one.
To remove the old glass, you must carefully remove the glazing beads that hold it.
You can replace the glass with a modern one: frosted, corrugated, colored, with a pattern or photo printing.
To correctly insert the new glass into the door leaf, do the following:
- Measure the parameters of the opening in the door leaf, where the glass will be inserted.
- Cut the glass to the required size so that it can fit securely into the opening, for which it must be 5 mm shorter than the required size on each side. To cut a piece, you will need a glass cutter and a metal ruler.
- Insert the glass into the opening, pre-treated with sealant and fix it with glazing beads, fixing them with thin nails.
Glass with a hidden fixation is more difficult to insert, it will require a complete disassembly with unscrewing the bolts in order to pull out the old part and also insert a new one. The negative point of such a replacement is the possibility of losing the correct dimensions of the canvas. In this case, it is necessary to straighten it with a planer.
If you insert old glass, then it must be brought back to normal. Clean the old one with a scraper, acetone or a blade. Polish small scratches with toothpaste.
Renew glass with a film with a pattern, paint it or make a stained glass window on it. It is necessary to apply fresh glazing beads and replace the fittings with new parts.
Instead of glass, you can insert an acrylic shatterproof mirror. It is light and durable, lends itself well to cutting and stands out for its high decorative effect. Then the door will look like new and please the residents for a long time.
Cloths from fiberboard
Such a canvas is slightly different from working with wooden surfaces. The thickness of the fiberboard surface reaches only 4 mm, so it is necessary to remove the paint from it with extreme caution.
You can not use a blowtorch for this - you can use the iron, wrapping it in a towel, if there is no building hair dryer.
After sanding, the canvas is either varnished or painted with new paint. But there is a restoration method that allows you to turn a thin canvas into a natural wooden door - this is the veneering of the canvas.
Veneer parts are sold in specialty stores. You can glue it with an iron, heating the surface, because it already has an adhesive base.
Be careful not to overheat or burn. Glued parts can be stained and varnished. You can decorate a simple door by sticking embossed strips on its surface.
We should not forget about the restoration of the door frame - it must match the updated canvas. By replacing the fittings with a new, more modern one, you can increase the life of the door.
Plastic products
Most assume that it will last forever and its dazzling snow-white appearance will not dry out. However, even plastic products will require replacement or restoration over time.
An old plastic door can be restored in several ways:
- Door painting. First you need to remove the old protective film from the plastic. Then wash the surface well using special products. The main difficulty in applying paint to plastic is that the liquid cannot be applied in its pure form. Add a little hardener to the paint, and then filter it. Paint is applied to the surface of plastic products using a spray gun in one layer. Next, let the paint dry and install the door in place.
- Vinyl sticker. If there is no opportunity and desire to paint, you can stick a vinyl film on the old door, choosing the appropriate pattern and color. For high-quality gluing of the film, the plastic surface must be degreased, and then washed with soapy water. Apply a film on a clean and dry surface and smooth it, after a few seconds you can remove the white base.
- Veneer pasting. Also process the surface of the door and stick the veneer parts on it with a hot iron. This option is acceptable and reliable. Natural material lasts longer than artificial panels.
Do not forget to update the door frame, because it cannot be replaced, gaps may form between the frame and the canvas. You also need to replace the hardware and the door will be like new.
What about metal?
You can update not only interior doors, but also the entrance, made of metal. To do this, it should be removed and placed on a horizontal, flat surface, so it will be more convenient to work. Then execute in sequence:
- Remove or close the fittings with construction tape: peephole, handle and other components.
- Use a drill or a wire brush to clean areas damaged by corrosion. Sand the surface of the canvas with coarse sandpaper, remove dust with a vacuum cleaner and treat the canvas with a solvent.
- Treat the surface with a special composition for polish, but intended for cars. Putty for wooden products cannot be used - it gives poor adhesion to the metal surface. Autopolish will close up all the dents, scratches that have arisen in the process of cleaning from rust. Give a smooth surface with a spatula and allow the canvas to dry for 30-40 minutes.
- Polish the surface to be restored with fine grit sandpaper, wipe with a damp cloth and degrease with a special builder to remove grease.
- Prime the surface with a metal primer designed to resist corrosion. It is convenient to apply it with a roller or a narrow brush. Let it dry and sand again with fine sandpaper.
- Paint the surface with the selected paint in 2-3 layers - it is important to achieve the desired saturated result. Each new layer is applied only after the previous one has completely dried. For painting, it is recommended to use a roller, brush or spray gun. Protect yourself from paint exposure by wearing gloves and a respirator.
The door frame should be restored in the same way.
Then release the hardware from the adhesive tape or mount it again and hang the door in its place.
If only a section of the canvas is damaged, you can only update it, however, this will require a careful selection of paint by tone.
Restoring old doors with your own hands is an interesting and exciting job.
You can choose an acceptable canvas, choose the right material and dream up with decor.
In addition, you can significantly save on replacing doors, and this is an important fact for the family budget.
Do-it-yourself updated doors are a reason for the pride of the owner of the house. And how to repair them - you can watch the video:
The interior door occupies an important place in the interior of the room. It serves not only as an obstacle to noise, delimits space and allows privacy, but also is a noticeable piece of decor.
There are several reasons why you can start decorating an interior door:
- Firstly, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find the right model. Sometimes all the doors seem the same - "I have already seen this one at the neighbors", "and this one looks like the door to our office." You don’t want to repeat and acquire something unoriginal and become commonplace, because your interior is unique, so the door must match.
- Secondly, even an old door with scratches, peeling paint and indelible stains is not known why you often don’t want to change it! After all, any replacement of a door is also a replacement of the box itself, which is associated with dust, plaster, sealing the gaps formed, the need to change the wallpaper (at least around the new door) - in general, with local, and sometimes overhaul.
That is why sometimes it is much easier for the owner to update an already installed door "on the spot", that is, without changing the entire box, right here in the room. Of course, in some cases, you still have to remove the door from the hinges, but this is much easier and faster than starting a full-fledged repair. Whatever the reasons that prompted you to start decorating an interior door, we’ll say right away that often you don’t need almost anything for this, except for the materials left over from the last repair.
And one should not think that real craftsmen and needlewomen will be able to cope with such a task - even a person who has never held a hammer or brushes in his hands can implement some of the ideas proposed in this article. And the result of your work in any case will be original, unusual and will become a source of pride - "here it is, our door, he did it himself (well, at least he decorated it)".
So, we offer you 14 interior door decorating ideas that you might want to bring to life by decorating your interior.
Idea first. We paint, we just paint
The easiest way, without frills and unnecessary work, is to put the door in order. To do this, you will first need to remove the door from the hinges, then go over it with a spatula, removing old paint, level the surface with sandpaper, close up cracks and scratches with putty, remove grease stains, seal the glass with masking tape so as not to stain it, and you can take it in hands roller or brush! It is better to choose acrylic paint - it dries faster, and paint the door in a horizontal position - so the paint will not drain and lie more evenly. However, if it is convenient for you to do all of the above on a vertically standing door, you can not remove it from the hinges. Just do not forget to put something on the floor during painting so as not to stain the linoleum or laminate.
White, simply painted door. Refurbishing or repainting a different color is not a big deal, although the moldings and carvings need special, gentle handling during sanding and removing old paint.
The second idea. We paint in several colors
The option is more complicated, although it is also associated with staining. In this case, we do not just paint the door in one color, but create a simple or complex geometric pattern of stripes, squares, rhombuses, and so on. The door must first be prepared, as in the first case - that is, it must be cleaned of old paint and the surface leveled. However, in this case, we will need much more masking tape - it is with its help that you will delimit the zones between stripes or rectangles. In addition, in order not to buy several cans of paint of different colors, you can purchase white paint (one liter per door is enough), as well as several dyes with which you can experiment with shades.
Gold and white, blue and pale pink, bright stripes on a neutral background, rhombuses and sinuous lines - a variety of patterns and color combinations can appear on the canvas of your door.
When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for country style, and for classics it is better to choose other options, for example, paint the top of the door in a lighter shade and separate the parts with a horizontal strip
Idea three. Highlight moldings
Also painting the door, which in general is not too different from the first option. However, in this case, we will focus on the moldings by painting them in a contrasting color. White and black is a great combination, but already beaten up, so think about what colors will look best together. Designers have long recognized white and green, blue and yellow, red and dark blue as excellent options. Such a door will look great both in a bohemian boudoir and in a strict classic living room.
The white door with highlighted black moldings is a true classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special thin wooden planks are sold, which are simply nailed onto the canvas
An unexpectedly bright, pink door that looks especially aristocratic and attractive thanks to the frames highlighted in white
Idea four. We paint according to the finished stencil
A very convenient and easy way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased at both construction and specialized stores, or ordered on one of the sites, and the choice of drawings and patterns is very large. Then we simply apply the stencil to the already prepared door and apply the paint. Easy, fast and as a result - very beautiful!
Applying a drawing on a ready-made stencil is as easy as shelling pears, and the choice will allow you to choose an original inscription, an exotic pattern, and an unusual picture
Such a deliberately simple pattern can easily be created without stencils. It was the uneven lines and simplicity that became its main highlight.
Fifth idea. Art painting
Unlike all the options for decorating the door already listed, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need the talent of an artist and certain skills in working with brushes, since a roller is no longer enough here. Imagine that your door is a blank white canvas, on which, thanks to your skill, a beautiful landscape, a cheerful picture or an exquisite pattern will appear. Fine hand painting always looks expensive and stylish, and you can achieve this effect by spending money only on buying paints.
Ready-made interior doors with artistic painting are offered by many European companies. Of course, they are not cheap, so you can try to create something similar with your own hands. Are you afraid it won't work? You can always just paint over a bad drawing!
Idea six. Children's creativity
Does your kid love to draw? Give him such an opportunity - let him decorate the door to the nursery. Yes, such a naive, bright pattern will be out of place in a strict living room, but as a decoration for a children's room it is a great option. Just agree with the young artist that the second half of the door is already your field for the realization of fantasies!
Usually children's paints wash off very easily, so your budding artist can repaint the door every day. But you will have to pre-prepare the canvas by putting the door in order
Idea seven. Unusual texture with paint
If you find it boring to simply apply paint, and you are afraid to take on hand-painting, you can try to achieve unusual textures, such as the effect of a wooden surface or an antique door, using very simple tools. So, with the help of a sponge you can get a spotted surface, steel wool will help to achieve the effect of an old door, a hard brush - to create an expressive surface of denim. Special ready-made paints are also sold that perfectly imitate jeans, wood, canvas, velvet or slate.
On such a door, painted under a slate board, it is convenient to leave messages to household members.
Idea eight. Wall mural
If all the previous ideas concerned only work with paints and brushes, then this method is suitable for those who do not want to mess with paint. Wall murals will instantly transform the look of your interior door, turning it into a striking design element. Of course, it is best to purchase murals designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made photo wallpapers usually have a standard size of 86x220 centimeters, so they are only suitable for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made door murals, so you can choose the option that is ideal for your door, with any pattern. You can cut to size doors and ordinary wall murals, however, in this case, the drawing may look unfinished.
How do you like such an unusual option - a door that turned into a telephone booth with the help of photo wallpaper?
Before sticking photo wallpapers, the door must be cleaned of stains, and the surface should be leveled, sanded and degreased with a solvent. You can use ordinary wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating the door include the fact that a bright image will immediately catch your eye, so it can quickly get bored. In addition, the murals on the door, due to frequent touches, will lose their original attractiveness. However, no one will stop you from changing the wallpaper on the door to something more original in a couple of months.
Particularly popular are photo wallpapers with picturesque landscapes.
Wall murals on the door will help to make a small room visually larger due to the increased panoramic perspective. And sticking them is very easy, for this you do not even need to remove the door from the hinges.
Idea nine. Ordinary wallpapers
Previously, this decor option was very popular, but now many designers consider it bad manners. This does not prevent ordinary wallpaper, "migrated" to the door, to remain a popular way to decorate the interior. Sticking paper and vinyl wallpaper on the door is especially popular in Sweden, the USA and Canada. By the way, it is not at all necessary to hide the entire door behind the wallpaper - on the contrary, the wallpaper, divided into clear “compartments” thanks to moldings, looks especially interesting. The remaining surfaces of the door can simply be painted, choosing a shade that matches the color of the wallpaper. Alternatively, you can buy cork wallpaper and varnish it on top for reliability. Their unusual texture will make the door more original.
Preparing the door is exactly the same as in the case of using photo wallpapers. The main advantage is cheapness, since you can use wallpaper left over from the previous repair, and ease of decoration. The main disadvantage is rapid wear - at the joints, the wallpaper can peel off and tear.
Wallpaper pasted not on the entire door, but on parts highlighted by moldings, look more spectacular
The door, pasted over with the same wallpaper as the walls, will literally merge with the interior. On the reverse side, the door, of course, is pasted over with other wallpaper so as not to stand out against the background of the wall of another room.
Idea ten. Fabric instead of wallpaper
This option will look especially cute and homely. The door decorated with fabric looks original, the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.
If you choose a single piece of fabric to decorate the door, you should take care of the original pattern.
First, when choosing a fabric, you should make sure that the glue does not leave stains on it. Secondly, the edges of the fabric should be pre-treated, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric are not suitable for every style of interior design. Those who are fond of patchwork, that is, the creation of canvases from different pieces of fabric, can turn their door into a real application of bright shreds. By the way, if there is a place for a glass insert on the door, you can hang a small curtain here, fixing it on a fishing line and small carnations.
Very nice door, decorated using patchwork technology. The trouble is that such bright shreds have nothing to do with the classic interior style, this is an option, rather, for a “rustic” and colorful country
Idea eleven. Posters, cards, paper
An option for creative people and a great idea for a teenager's room. The door can be decorated with a poster and an image of your favorite artist or group, sheets from an old geographical atlas, or sheet music. Sticking such paper sheets and posters is as easy as regular wallpaper.
An old geographical map will be appropriate even on the interior door of an ordinary living room, but posters are better to “settle” in a teenager’s room
Idea twelve. All kinds of stickers
This simple and not too expensive way of decorating a door is becoming more and more popular today. Vinyl stickers can be purchased in online stores, the cost of a model the size of a standard door starts at 2.5 thousand rubles, they are glued very easily, and will last longer than ordinary photo wallpapers.
Stickers with such funny and at the same time useful inscriptions will not only decorate the doors, but also cheer up the guests.
If you do not want to hide the entire door behind the stickers, it is quite possible to purchase small images - a butterfly, a bright flower, and so on. They cost less, and the appearance of the door will be completely transformed. “Informative” stickers are also popular, for example, on the door of an office, bathroom or bathroom, which will tell guests what is hidden behind this door.
The elegant lady on this sticker will immediately inform the guests of the house that the bathroom is hidden behind this door.
Often, stickers can look like ordinary photo wallpapers, and sometimes they can look like hand-painted on a white door or a child's drawing.
Idea thirteen. Decoupage
The technology of scrupulously cutting out the images you like from paper and further composing applications from these pieces allows you to transform not only a jewelry box or photo album cover, but also an ordinary door. Everything that a novice master of the ancient art of decoupage needs: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut a picture, a brush, PVA glue, scissors, glitter, acrylic varnish, contour and acrylic paint.
In the process of decoupage, you can use literally anything - from scraps of old newspapers to greeting cards.
In a brief description, the process looks like this: we apply a layer of white acrylic paint on the surface of the door, wait for it to dry, then another layer - and again wait until it dries completely. Then we apply a layer of paint of the selected shade, and then we attach the cut-out paper drawings with PVA glue. At the same time, we try to glue the piece as evenly as possible, without wrinkles and expel all air bubbles. With the help of glitter and contour, we can add dots, stripes and other small details. Then we cover the finished picture with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.
The decoupage technique allows you to create amazingly beautiful paintings, and the lacquer coating will extend the life of the decor.
Idea fourteen. Mosaic
A door decorated with bright mosaics will be an excellent option for a bathroom; you can also decorate a metal front door in this way. Moreover, it is not at all necessary to use pieces of ceramics for these purposes - in this case, the door may turn out to be too heavy. Mosaic can be created from pieces of wood or veneer, as well as purchased ready-made, made of glass.
In this case, a bright glass mosaic occupies most of the door, making it very unusual and cheerful.
The mosaic is fixed with special glue (Moment or liquid nails are suitable) on a prepared and cleaned surface. It is worthwhile to think over all the details of the pattern in advance by drawing the layout of the pieces with a pencil. By the way, you can decorate with a mosaic not only the door itself, but also the box, highlighting the slopes using the selected pattern.
Creating a mosaic pattern is a huge scope for creativity. And if some part still falls, you can always attach it back.
An old door can become a real art object, all it takes is a little imagination and effort. To begin with, you can use one of the simplest ideas, and then, having got a taste, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!
Doors play an important role in interior design. There are many different models in stores, but high-quality ones cost a lot of money, and you usually don’t want to look at cheap ones. There is a good option - to update the old doors with your own hands. There are many techniques, and not the most complex ones, that allow you to correct the situation for little money.
Training
Whatever method you choose to update the old interior door, you will need to carry out a number of preparatory work. Usually old painted specimens are going to decorate. Painting is usually amateur, so there are more than enough bumps, sagging and other minor defects. All of them need to be aligned.
We remove the door leaf from the hinges, lay it on a flat surface. You can - on the goats or the table. We take putty on wood (even if they are from or) and we cover all holes, chips and cavities with it. After drying, we proceed to the next stage - grinding.
We take sandpaper with a large grain and with a fine one. We process, achieving a flat surface. If you work manually, it takes a lot of time and effort. With a hand sander, work moves faster. If further painting is planned, we try to achieve the most even surface. If you plan to decorate with wallpaper, fabric, self-adhesive film, you can not bring it to the ideal, but it should be exactly the same.
Next, we remove the dust, wash off the remnants with water and diluted dishwashing detergent. We dry. The next steps depend on the selected update method. If you are going to glue fabric or wallpaper of any kind, you can prime the surface (liquid diluted glue or a special primer). After the primer dries, you can glue the selected type of decor or apply paint. By the way, if you are going to paint the doors, you need to select the paint of the same type that was before, otherwise you will have to remove everything to a clean base, and this is very difficult.
Update old doors with wallpaper
The easiest and most affordable way to make old doors look attractive is to use wallpaper. They do not have to be in the tone of the walls, although this option is not excluded. First, we prepare the canvas as described above, and then you can proceed to the finish.
The procedure for pasting doors with wallpaper is as follows:
Wall mural
Modern photo printing allows you to transfer three-dimensional images to paper. They turn out very nice. And you can print any image of your choice. Generally, any. Photo printing is usually done by advertising agencies, sometimes by printing houses. Contact there, explaining what you need (have a flash drive with the selected pattern and the exact dimensions of the canvas on which you want to print the image). Having received the required image, we glue it on the door according to the method. described above.
Wallpaper with moldings
If you stick foam or polyurethane moldings, sockets on plain wallpaper, the style will completely change. This type of door is suitable for classic interiors or rooms; when using a colorful background and a different form of moldings (with roundings), you can decorate in the Provence style.
The work is no different from the sequence prescribed above. We take prepared doors with a leveled surface, spread with glue, glue wallpaper.
Leveling the panels with a rubber roller is not difficult to achieve good results, but some small air bubbles remain. To remove them, they take a special plastic spatula (they are available in any hardware store), and they finally remove the air from the center to the edges. Also, with this spatula, the joint of the wallpaper, if any, is ironed. It is quite possible to achieve that the joint will not be visible.
We cut the edges of the wallpaper with a wallpaper knife. This must be done until the wallpaper is softened from the glue, otherwise then they can “reach out” for the blade and tear. We leave to dry. After 12 hours or a day - depending on the temperature and humidity in the room - you can continue decorating the old door.
Carefully, with a simple pencil, mark up. When everything is drawn, with a tape measure we measure the required length of the molding pieces. Cut off, cut the edges at an angle of 45 °. We take a suitable glue (you can use PVA) and carefully spread the back surface of the cut off elements, glue them according to the markings, leave to dry.
By the same principle, you can update old doors so that the style will be different. Some examples in the photo gallery.
Beautiful tone-on-tone wallpaper is the secret to the appeal of this door decor 
Moldings were glued to the painted doors, which were then painted with “golden” paint.
Designer decoration of old doors
If you are interested in designer things, you can try to turn it into an art object. The good news is that you do not need to cook it: bumps and sagging will hide under the design.
The decoration process begins with the manufacture of papier-mâché. Take egg trays, sprinkle with water, knead with your fist, trying to level the surface. In the process, they will tear, this is normal and even good - we need small pieces. These almost flat fragments, on liquid nails or with a glue gun, are glued to the surface in random order.
Lids, rings, a small perfume bottle, a small non-working computer mouse, the remains of a mosaic, everything that comes to hand are used. There will be a lot of trash, you can collect ahead of time.
When most of the surface is “decorated”, we take acrylic silver paint in spray cans (2 pieces are needed) and paint over the decor well. When choosing a paint, it is better to take an expensive one, in particular German, so that it does not crumble later.
Decorating doors using decoupage technique
Romantic or "cheerful" door design can be done using decoupage. For work you will need:
- napkins with a suitable pattern;
- PVA glue (about 200 ml);
- natural bristle brush;
- acrylic lacquer.
We prepare the canvas, as described earlier. We prime and paint in the appropriate color. After the paint has dried, we start decorating. We take a pack of napkins you like, separate the top layer, which is with a pattern.
Tear napkins with a pattern lengthwise into three strips. We tear, we do not cut. We need a slightly uneven edge. Two strips on one side get a smooth edge, put them aside in one direction. The middle part is torn into squares. The best option is if they are with a side of 3-4 cm.
We take glue, a brush, a small container. In it we mix PVA with water in equal proportions.
Next, we proceed to decorate the door with our own hands. We take a strip with a smooth edge, apply it to the area to be decorated (in this case, this is the center of the door leaf). We dip the brush in glue, we begin to smooth the fragment in different directions. Creases form, but this is just not bad - a more textured finish will turn out, so there is no need to align them especially. Napkins when wet are very delicate and elastic, remember this when working, act carefully.
Gradually we make a frame with one even edge. The second is carelessly torn.
Filling the middle of the "frame"
When the entire surface is filled, we leave it for a day - we wait until the PVA dries. Next, take acrylic varnish and cover our decor with a soft brush. So that it does not smell, we take a water-based varnish. It's a little more expensive, but it doesn't hurt your head.
The beauty of decoupage is that at a meager cost we get beautiful things.
Door decoration with self-adhesive film
Perhaps the easiest way is to update old doors with self-adhesives. All you need:
- the film itself
- a spray bottle containing soap and water;
- plastic spatula or soft cloth;
- sharp knife (you can wallpaper).
This film is available in different versions - there is a monochromatic matte or glossy, there is a monochromatic one with holographic patterns, under a tree, there are even special doors for pasting with applied photo printing.
Regardless of the type of film, it is glued in the same way. In this case, we decided to update the old doors using the photo printing option. One moment: before gluing, we remove handles, latches and other door fittings.
For the decor to be of high quality, the surface of the door must be clean, even and smooth. If you processed it before this grinder, try gluing a small piece of film. If it sticks well, everything is fine. If it “does not stick”, you will have to prime the doors, and then paint or varnish them to create a smooth surface.
We take a spray bottle and evenly wet the surface of the door.
We shave the film, remove the protective layer from one of the corners, and also spray it. So, wetting, we separate the protective paper from the upper part along the entire width of the film.
You should get a strip 15-20 cm wide. Do not remove any more so that the film does not stick to the canvas. We apply the peeled off part to the upper edge of the door leaf (or the area to be decorated), it quickly sticks. Try to immediately apply evenly, but the situation can be corrected - for this we wetted the surface so that the film could be moved. If you pull it, it moves a little.
After making sure that the canvas lay flat, we take a plastic spatula (for wallpaper) and smooth the surface with it, moving from the center to the edges. The goal is to remove all the air. Since the surface is wet, this is not difficult - water displaces air.
Further, everything is simple. We pull down the protective paper, peeling off the strip, glue it and so on - to the very bottom of the door. If you glued the upper part for a long time, the lower part may dry out, so periodically check if the doors are dry, spray again if necessary.
After the entire film is glued, cut off the excess along the edges with a sharp knife. All that remains after that is to install the fittings.
Door decor with stencils
Old doors can be updated with applied drawings. The only pity is that not everyone has artistic talents. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find the image you like, print it on thick paper, cut out the pattern with a sharp knife, leaving jumpers in places. Here is the finished stencil.
The disadvantage of a paper stencil is that it does not last long. If you need a "long-playing" transfer it must be on a transparent thick film. In more detail, the stencil cutting technology for door decor is shown in the video.
The drawing can be anything. Both geometric and floral, stylized images of animals, birds, cartoon characters are popular.