Decorative plaster in the interior for unlimited design possibilities. Wall decoration in the bedroom with decorative plaster Decorative plaster in the hall

Impressions about the repair to a large extent depend on how the walls are decorated. Previously, only wallpaper or paint was used for these purposes. Today, many people want to come up with something original. Decorative plaster in the interior will solve this problem. Currently, it is used very often in different rooms. With the help of it, an original repair is created.

Material use

Decorative plaster in the interior is used not only for covering walls, but also for finishing ceilings. With the help of such material, you can create various effects, patterns and textures. The use of plaster began in ancient times. People have noticed that you can get the effect of marble on the wall if you mix a crumb of this stone with water. Workflows with such material were much easier than with slabs. If financially possible, artists were invited, as well as sculptors who were engaged in creating stunning patterns on the walls from the mixture. Works of art have survived to our times thanks to some unique features material. Currently, decorative plaster has become more accessible to many citizens. Decorate with it bearing structures country houses, restaurants, hotels, offices, various apartments etc. Plaster can be found almost everywhere where the owners of the premises want to create comfort.

Material composition

Decorative plaster in the interior, as mentioned above, is being used more and more often. This is a mixture that consists of several components. It contains a binder. The basis of this material can be epoxy, polymer and acrylic resins. They are artificial ingredients. But also the binder is made on the basis of natural materials. These include: lime, cement and gypsum. Also plaster consists of a filler. This role is played by a crumb, which is created from natural stone. For example, slate, marble or granite. In addition, cellulose fibers or glass may be added to the mixture. The future pattern on the walls or ceiling will depend directly on these materials. The composition of the plaster also includes auxiliary substances. Due to them, the quality of the mixture is improved. This role is played by preservatives, various compounds that allow the material to be water-repellent. They also include antiseptics that protect the plaster from harmful microorganisms.

Advantages of plaster in the interior

During the execution of work, you can select the individual color of the mixture. When plaster is applied to the surface, no joints are formed, as is the case with wallpaper. This feature allows you to use the mixture not only on flat areas, but also on plasterboard structures, arches, columns, niches and so on. The material is durable, while it does not require special care. Decorative plaster in the interior will last for many years, with the help of it it will be possible to create high-level repairs. The mixture does not fade in the sun, so it does not become dull. In addition, it does not wipe off. Also, the mixture is absolutely safe for humans, it perfectly passes air, and when the repair is completed, there will be no bad smell. Plaster can be used in conjunction with other finishing materials. One of the main advantages is that there is no need to perform thorough surface preparation before applying it.

Tools to get the job done

Each repair process requires certain devices. Therefore, you first need to purchase a tool with which decorative plaster will be created in the interior. The photo below shows the main fixtures, they are available at any hardware store.

1. To eliminate cracks, you need a spatula.
2. A scraper is needed to remove old coatings.
3. A spatula is used to level the solution.
4. To throw the mixture on the surface, a trowel is needed.
5. Leveling the plaster is done with a grater.

Decorative plaster. The technology of its application

In order for the mixture to fit well on the surface, you must first work on them. If there were wallpapers on the walls, they are removed. Then the surfaces are cleaned of the remnants of glue and paper, because of them the mixture will not adhere well. It is recommended to apply a primer first, which will strengthen the walls or ceiling. With the help of such a solution, the surfaces will be dust-free, and mold will not form on them. The mixture is applied thin layer m, the thickness of which is several millimeters. Before this, the walls must be wetted. This condition must be observed when decorative plaster is created. Otherwise, the technology will be broken, and then the mixture may simply crumble, as the surface will absorb all the moisture from the solution. Wetting must be carried out 30 minutes before the plaster is applied.

The popularity of using the mixture in different rooms

Today, decorative plaster in the interior of the apartment plays a big role. With the help of it, finishing work is carried out in various rooms. It can be used on the walls of the kitchen, bedroom, living room, bathroom or toilet. A variety of colors and textures allows you to choose the right style for each room. Often decorative plaster can be found in offices. It emphasizes the status of business offices. Basically, such a finishing material is selected for the style of furniture and other items that are located in the room. In addition, plaster is used to decorate various entertainment venues: discos, clubs, pubs, and so on. So, with the help of a mixture, designers can successfully create the atmosphere of a Russian tavern, a rocker club, an English cafe or a French bistro.

Living room design in the style of the ancient era

To create a sophisticated interior today, Venetian plaster is often used. This trendy decorative plaster in the interior of the living room will emphasize the elite status of the room. With the help of it, panels are created that will imitate natural stone. Venetian stucco can look like malachite or granite, as well as resemble compressed fabric or embossed leather. Moroccan or Mauritanian such mixtures are found in stores. They are highly plastic compositions, while being finely dispersed. If special mixture application methods are used, a polished surface can be created. She can imitate finishing stones such as granite, marble. Also, with the help of Venetian plaster, three-dimensional drawings are quite simply obtained. On the last step to create wall decoration, varnish or wax can be applied to the dried mixture. Due to such materials, a uniform gloss will be obtained, and the surface will also acquire additional water-repellent properties.

Plaster "bark beetle" for the interior

This is one of the most popular mixes for wall decoration. Decorative plaster "bark beetle" in the interior very well imitates a tree that is eaten away by a bug. Here, for full compliance, it is necessary to correctly perform the technique of applying the mixture. Such plaster can be used not only indoors, but also on the facades of buildings. As a result of using this method of decorating, the surfaces are matte and grooves are formed on them. The rooms will be dominated by a calming and cozy atmosphere. In the material, the filler is always marble chips. These elements directly contribute to the formation of grooves when the material is rubbed. Decorative plaster in the interior (the photo above is a visual proof of this) looks exceptional. Depending on the size of the crumb, the width and depth of the recesses on the surface will depend. The best option is the use of marble grains with a diameter of 2-2.5 mm.

Textured plaster

Such a mixture can be different color. Filler here are any materials. It can be linen or cotton fibers. This wall material perfectly imitates tree bark, wild or masonry stone. Relief coatings for surfaces belong to the largest group. This will look great in the interior of the kitchen. Its appearance is very diverse, since almost any materials and techniques can be used to create textures. Special paints, varnishes, pastes and even in some cases paper are used for these purposes. Such plaster, after being applied to the surface, acquires a texture that is directly characteristic of a particular filler. With the help of this material, defects in ceilings and walls are well hidden. The mixture will always look original on the surface.

stone chips

Such a mixture consists of real small particles that are mixed with a material that acts as a binder. For example, it can be a special glue. The stone chips used in plaster come in different colors, while there are a large number of shades. In stores, the mixture is sold in metal or plastic buckets. Currently, you can find marble, granite or quartz chips. Usually this material is used in small areas. With it, you can highlight some of the details of the interior. These can be ledges, openings, arches, niches, racks, and so on. Also, such decorative plaster will be one of the best options. because stone chips is a colder material compared to wallpaper. It is mainly used for non-residential premises.

Structural plaster

Granules are added to this material for decorating surfaces, which can be small pebbles, quartz fragments or wood fibers. The basis for this mixture is synthetic materials such as latex. Also, this role can be performed by a cement-lime mortar. It is not uncommon for a mixture to be made on water based. Such material does not smell like chemicals. The use of decorative plaster in the interior based on water will be the most best solution. The main difference of this mixture will be that it is very plastic. It can be applied to surfaces with almost any tool. Before use, the mixture does not need to be diluted, as it is already ready for use. Structural plaster is very easy to care for. She is not afraid of water, despite the fact that it contains lime. This is facilitated by special substances in the plaster.

Light walls in the house

For small spaces ideal option will make the walls white. The most important thing in such a situation is not to overdo it, because the room can resemble a hospital ward. Today it is often used in the interior. With the help of a mixture of this color, the room will visually increase in size. Moreover, almost all ceilings are created light. White color increasingly used by professional designers. It can serve as a background for various drawings. Walls are not always made completely light. In most cases, white plaster is used to dilute other tones. The most important thing is to correctly distribute this color over all elements of the interior.

Conclusion

In stores today there is a very big choice decorative plasters. It will not be difficult for professionals to apply the mixture on a wall or ceiling. The amateur needs to be patient first of all. For him, it will be a laborious process.

Wall decoration with decorative plaster can be considered one of the most interesting and variety of options finishes. And let the price of such a coating be higher than when painting water-based paints, or wallpapering, but it is more than compensated high level aesthetics and durability of the material.

We will talk about what decorative effects are most popular today, how certain compositions differ, and how interior plaster is combined with other types of coatings. The video in this article will introduce you to the technology for performing certain options for decorative plastering.

All types of plasters that differ from ordinary leveling screeds in color or texture are called decorative. And if twenty years ago they were used mainly for exterior decoration of houses, today interior plaster with a decorative effect is incredibly in demand as a material for internal works.

The preparation of the base bases for decorative plastering is carried out in the same way as for leveling. To determine the thickness of the ground layer, the walls are hung, with the help of a level and a cord, the marks of all architectural elements are verified. The primer is the first, thickest layer of plaster.

Creating Effects

All subsequent layers are called covering, and depending on the type of plaster, there can be quite a lot of them: from two to seven or eight. If the underlying base is flat, for example, the surface is sheathed with plasterboard, or it concrete wall in panel house, you can start immediately with a covering layer.

So:

• Each subsequent layer can be applied only after the previous one has completely hardened - and this is at least a day. The thicker the layer, the longer it dries. It takes considerable time to complete this work, but this is perhaps the only drawback of this type of finish.

• To obtain a relief or texture, the coating layer can be processed not only in a plastic state, but also after hardening. It depends on what kind of effect you want to get.
• All mixtures intended for decorative plastering contain plasticizing additives, and the effect that is obtained as a result often depends on the type and fraction of the filler. Manufacturers bring to our attention both ready-to-use solutions and dry mixes that need to be tinted and diluted with water to the desired consistency, as prescribed by the instructions.

• Relief plasters in the interior are performed using various rollers (see. Rollers for decorative plaster and creating a relief surface), hatching and any improvised items (comb, cellophane, brush, metal brush, etc.) on the uncured screed. There are many techniques, and, in general, the performer's imagination is not limited by anything.
• There is a so-called Italian finish, in which the first coating layer is applied to the ground, leveled, and until it hardens, the second layer is sprayed with a long-haired brush so that the lower surface is slightly visible, and then slightly smoothed with a metal float.

The color of the solution, in this case, may differ by a couple of tones, or even be contrasting, and the resulting effect depends on the exposure time of the spray. The result is approximately the same as in the photo above.

This plastering technique is not particularly difficult, and it allows you to do the work yourself.

Mechanical processing of coating layers

Textured processing of the hardened screed is more difficult option decor. The rusticated plaster looks very interesting in the interior. Rust is a notch, a groove, a recess, call it whatever you like.

• Initially, this technique was used only for finishing facades, but it also looks chic indoors. With the help of rusts, you can even create an imitation of brick or stone masonry, boards on the surface.

• The covering layer in this case is made thick enough: it is leveled, carefully compacted with a wide wooden block, and then smooth down with a trowel. Such a screed hardens for almost a week - it is moistened with water several times a day, dried for a couple of days, and only then they begin processing.
• The direction of the recesses is marked with a dyeing cord, and then the rustications are stuffed. To work on the plastic layer, a metal ruler and a hammer are enough. If the screed has half lost its plasticity or has completely hardened, a rust cutter is used to texture the wall.
• Using trapezoidal slats, you can get an imitation of sawn natural stone. Decorating all the walls in the room with such a relief is quite laborious, and it does not make sense. But the emphasis on one wall immediately attracts attention, and incredibly improves the visual perception of the interior as a whole.

• There is also a technique for processing the covering layer, called "sgraffito". This finishing option is made by applying two or more colored layers, followed by cutting out the pattern. special tool. The contour of the image can be applied in an artistic way, or using a stencil.
• When cutting out sections of the upper covering layer, the lower layer of a different color is exposed. If a significant area of ​​the screed is removed, then a 3D relief is obtained, which looks like an application. But there is another option: the covering layer is removed only inside the contour of the drawing, and then it turns out to be in-depth.

• A similar decor is also performed on one wall, in a ceiling caisson, or, for example, when finishing a plasterboard niche. The solution for plastering is selected depending on the version of the drawing. The covering layer is most often a cement-lime mortar, where colored or white sand is present as a filler.
• It can be quartz, or it can be a product obtained by grinding any natural stone. Non-machined screed mortar can use colored cement as a binder.

There are many variations in the processing of covering layers. It looks very nice, but not everyone will be able to do something like this on their own.

The effect of "artificial marble"

One of the most popular decorative plaster options among the people is marble imitation. This effect called "artificial iron marble", because on final stage, the top layer is polished with a hot iron.

So:

• This type of plaster is created from a large number screeds: spray, two layers of soil and several covering layers. In short, this is how it is done.

The base is cleaned, notches are made on it, and the soil is filled with a lime-sand mortar. The thickness of this layer is within one and a half to two centimeters, and it takes at least two days to harden.

How is marble imitation obtained?

As part of the first coating layer: fatty lime dough, marble sand with a fraction of 0.5-1.5 mm and water. It is leveled, smoothed with a metal grater, and minor defects putty.

• The second layer of coating is applied within half an hour after the setting of the first. The composition of this layer is similar to the previous one, with the only difference that the fraction of marble chips here is smaller: 0.2-0.6 mm. If you need to get colored marble, then the necessary pigments are added to the solution.
• These two layers must be ironed. That is, the liquid cement paste is applied in a thin layer on fresh plaster, and then carefully smoothed with a spatula. This is done to increase the strength and water resistance of the plaster.

• If at the same time cracks have formed in the second layer, they are embroidered and puttied with a solution intended for the third covering layer. It already uses not marble sand as a filler, but powder of the finest grinding.
• At this stage, the screed is allowed to dry for a day, and then covered with a special emulsion. The composition of the emulsion includes milk of lime, laundry soap and talc. All this is boiled for two hours, then filtered and the pigment is added. The emulsion for tinting the main background and marble veins is prepared separately.
• First, an emulsion of the main tone is applied, and when it is absorbed into the surface, veins are drawn with a thin brush or pen. They do this several times, let the emulsion dry, and after it stops sticking to the hands, they begin to iron the surface.

• Ironing allows you to perfectly smooth the surface and achieve that shine that is inherent in polished marble. This is a rather complicated process: irons are heated on a brazier with charcoal, first gradually raising and then lowering the temperature.
• When they are not heated enough, the emulsion will stick, and if overheated, cracks may appear. If the film is accidentally damaged, this place is puttied and ironed again. Then, the decorative layer dries for two weeks, after which it is washed, degreased with white spirit or turpentine.

At the final stage, the surface is coated with a special wax and polished. As you can see, this is not an easy job, and it is easy to guess that such a high cost of marble plastering is due precisely to the laboriousness of its implementation.

Craquelure and colored plasters

The decorativeness of the coating is not always created by the performer, although, of course, not without his participation. There are many plasters on the market that are designed to create a specific effect, and can even be tinted by the manufacturer to a certain shade.

For those who do not have the skills of such work, but do not want to resort to the services of expensive specialists, this is the best way out.

bark beetle

The most affordable, and easy to perform, bark beetle plaster, imitating the surface of a tree eaten by a bug. This effect is achieved due to coarse-grained stone chips in the composition of the mixture. "Wormholes" are obtained in the process of moving a trowel along the surface in one direction or another.

"Bark beetle" - plaster in the interior

• Such plaster is applied on a leveled and primed surface. The plaster is mixed and applied to the base to the thickness of the filler fraction. The excess solution is removed, and while the screed retains plasticity, a pattern is formed. The first layer dries overnight.
• By the way, such plaster is tinted not only in bulk, that is, by adding pigment to the solution, you can simply paint the covering layer. So there are more opportunities for decoration, because the range of paints is much wider than pigments. The surface method of staining is much better, and here's why.

• Difficulties in tinting the mixture in bulk arise because it is almost impossible to obtain the same shade in different batches. I would have to knead a large volume of the solution at once, and it’s not a fact that it will be possible to work it out before setting alone.
• The first covering layer is painted with a darker shade of paint, the second one is made lighter. Thus, the depressions on the surface, formed due to the movement of the filler, stand out in contrast. The finished coating can be further decorated.

• With the help of a film stencil, fixed on dried plaster with masking tape, paint is applied with a sponge. In this way, you can not only create a decor, but also visually zone the room. This type of plastering is carried out both over the entire area of ​​​​the walls of the room, and is used as an accent on one wall or ceiling.

Decorative plaster can be combined with any other type of finish: wallpaper, wooden paneling, panels, brick texture. One of the most good examples you can see this combination in the picture above.

Antique decor

All types of plasters that create the effect of antiquity are called craquelure. By by and large, the same "bark beetle", which was mentioned above, can be attributed to them. But if there wormholes are obtained as a result of mechanical action on a plastic screed with a tool, then the effect of cracked plaster is created using a completely different technology.

• Colored mother-of-pearl is applied as the first layer, and allowed to dry completely. The second layer is a craquelure varnish-activator. It dries in half an hour, after which you can apply the textured mixture tinted in the mass. Thanks to the varnish, the covering layer that has not yet set begins to crack right before our eyes.

• There are other techniques for achieving a craquelure effect. For example, this: the first layer is colored plaster tinted in a dark shade. Then, while it still retains plasticity, a composition of a lighter shade is applied with chaotic short strokes.
• For the appearance of cracks, the plaster is not allowed to harden naturally, but is dried forcibly using a building hair dryer. The number and size of cracks depend on the thickness of the coating layer and its drying time.

To give decorativeness, cracks are covered with colored varnish, enamel of a different color, or a glazing composition with a pearly sheen. After drying, the surface is polished to a gloss. In the end, the resulting coating is also very similar to marble, which we see in the photo above.

To date, there are many different finishing materials. The most popular of them is decorative plaster.

Its leadership in the market is explained by the fact that it has many advantages. It is durable, easy to care for, moisture resistant, while its cost is low.

Consider how to make decorative plaster yourself.

Types of plaster

This material for decorating rooms and facades may have various properties. Depending on the:

• Chemical composition and components.
• Texture and style.
• Number and size of granules.

Chemical composition and components

Mineral, excellent value for money. Made from cement and lime. In stores, it is sold in the form of a dry mix. Therefore, before starting work, it must be diluted in water.

It is used not only for interior work, but also for decorating facades. Since it contains water-repellent substances.

In addition, it has a number of advantages:

• vapor permeability;
• fire resistance;
• resistant to mechanical damage.

Acrylic plaster is sold ready-made, in the form of a water-dispersion material for decoration.

In its production, a polymer solution is used that connects the filler. This type of plaster is tinted, so you can choose any shade.

Silicone applied for decoration external walls. Because it has various positive characteristics:

• High service life.
• Elastic structure.
• Self-cleaning material.
• High vapor permeability.
• Weather resistant.

Silicate or mineral plaster is very expensive, however, reliable and practical. Since the main component is potassium glass. This will protect the walls from the appearance of fungus.

This plaster is commonly used in the decoration of building facades. But you can find it in the decoration of interior walls.

If it is not possible to buy a ready-made mixture, then at home you can make decorative plaster from putty. With it, you can create textured images.

Texture and style

Venetian creates walls from marble. In the photo of decorative plaster, you can see how the room is being transformed. It is produced from an aqueous solution, lime and marble sand. This type of material is applied only to flat walls.

Structural is a heterogeneous mass with granules. It is made from latex and water. Its granules can have any color. The color scheme is tinted at the factory. However, choosing a color is not difficult, as manufacturers offer a large palette of different shades.

Textured is the most popular among consumers. Because with its help in the interior of the room you can create a relief or image on the wall.

Note!

Flock turns the wall into a mosaic. As a rule, it is sold in two containers. The first contains glue, the second contains mosaic elements. They are already pre-painted by the manufacturer. The wall is applied in stages, first glue, then mosaic pieces.

Glazing is used in cases where it is necessary to create a certain effect on the surface of the wall. For example, the effect of silk, velor, sandstone. Application of decorative plaster is possible on the facade of the building.

Instructions for applying decorative plaster with your own hands

Must be done first preparatory work. You need to remove the old finishing material.

The surface is cleaned, in the presence of cracks and holes puttied. After the wall must be treated with a primer.

After all the preparatory work is completed, the plaster is applied using construction tool. The material is laid in horizontal or vertical movements. The thickness of the application is measured by granules. After application, it dries for about a day.

This completes the application of decorative plaster. It can be painted in a different color or decorated as desired. different elements design.

Note!

Decorative wall plaster is a great way to quickly and inexpensively change the interior of a room.

DIY decorative plaster photo

Note!

Colored or white decorative plaster is a finishing material that is often used for cosmetic and overhaul modern premises. Thanks to the use of such a composition, you can create an original wall design, give surfaces any shade, recreate the texture of stone, wood, transfer the image in the form of engravings or ornaments. Wide spectrum application makes decorative plaster optimal material for finishing walls and partitions in the living room, bedroom, nursery and other rooms.

Advantages of decorative plaster

Modern manufacturers produce products that differ in composition, shade, method of application and other qualities. Using this material, you can create an interior in Scandinavian, Norwegian and German styles, choose a variety that is combined with the design of modern, Provence or classic (design examples are available in the photo).

This material, in addition to original look, has many positive properties, which include the following points:

1. Ease of application. Surface treatment required minimum set tools, drying of the material takes 4-6 hours for one layer, and complete hardening occurs after a day.
2. The ability to hide wall defects. If their surface has minor chips, bulges, cracks, decorative plaster will hide the flaws. If there are large irregularities, the wall will still have to be leveled, but it will be easier to do this than when using classic finishing materials.
3. A large selection of design options, so the use of interior plaster is appropriate in the living room, study, nursery, kitchen, hall and other rooms. Depending on the type of material, it becomes possible to realize the Empire style, art deco, modern, classic and other styles in the design of the room.
4. Environmental Safety. The composition of the material does not include toxic elements that can harm a person or the environment, so it can be used to decorate walls in the bedroom, children's room and kitchen.
5. Damage resistance. The finished surface is not afraid of temperature fluctuations, does not fade when exposed to sunlight, like some wallpapers, and does not absorb foreign odors, and maintenance of the coating is rarely required.
6. Long service life.

Although the process of finishing walls with decorative plaster usually includes cleaning and leveling the surface, this is not necessary if the room is in a new building. As a rule, in new houses, the walls do not have significant defects, so sealing cracks, chips and eliminating protrusions is not required.

Like any material, textured plaster has its drawbacks:

• the risk of cracking during shrinkage of the structure;
• the cost of the material compared to paint and wallpaper is not the lowest.

Varieties of textured plaster

Modern manufacturers offer products that differ in composition and properties. The following types can be found on the market:

1. On the mineral basis. The composition of such plaster includes a crumb of natural stone (granite or marble), the substance is produced in the form of a dry mixture with additives that give the coating relief and elastic properties. The mineral variety is resistant to water, so it is best used when decorating rooms with high atmospheric humidity.
2. Acrylic based. It is a ready-to-use material that is durable and easy to clean.
3. Silicone. Such plaster is produced on the basis of artificial resins, it is characterized by accelerated adhesion and ease of application.
4. Silicate decorative plaster. This type is distinguished by vapor permeability, strength, a variety of texture options, products are made on the basis of liquid glass and are sold ready-made.

If you want to use material for finishing the kitchen, it is better to choose a variety based on acrylic, since the coating will be protected from damage and will not crack from temperature changes.

In addition to the composition, the material can be classified by manufacturer and country of release. The use of Venetian decorative plaster in the interior is very successful: it includes stone chips obtained from granite, marble, malachite or onyx. Different companies offer products that differ in particle size, which determines the pattern on the finished coating. A wall treated with Venetian plaster acquires a luxurious appearance: a large fraction in the composition gives the surface the appearance of masonry, and a small one provides a beautiful and delicate pattern. Similar products are often purchased for decoration in the living room, bedroom or private rooms.

Another popular type is French plaster, which is made on the basis of mineral components and plant fibers. The material is suitable for creating an imitation of stone, wood, has a long service life and unpretentious care.

Finishing with French plaster is appropriate in the living room, in the kitchen, in the nursery or in the corridor.

For which premises should the material be used?

Interior design with textured plaster possible in almost any room, more often it is used in the following rooms:

1. Living room or hall. Depending on the style of the interior, the wall can be covered with bark beetle plaster and have a monochromatic texture, imitate masonry, or be decorated with engravings or fine ornaments. When decorating a hall in Art Nouveau style, it is appropriate to create a bright coating, light colors are suitable for Provence and country, and gray plaster is best for Hi-Tech design.
2. Bedroom. For this room, mainly natural-based materials are used, products in bright colors are chosen. When using decorative plaster for the bedroom, you can choose both a plain texture and a variety with an ornament; it is required that it has predominantly smooth lines and is in harmony with furniture and curtains.
3. Office or private room. When decorating such a room, you can use any tones and textures, taking into account the design project.
4. Hall. This room looks good in dark colors, it is advisable to choose plain plaster.

Popular design solutions

Most often with decorative material embody the following finishing ideas:

1. Imitation of masonry or solid surface. For this, it is more often used Venetian plaster, which allows you to imitate the appearance of marble or granite; stone in the interior looks equally good regardless of the purpose of the room, but it is advisable to choose such a design for spacious rooms.
2. Sgraffito. Such plaster allows you to create an ornament in the form of applications, to give the walls an aged look.
3. Imitation of a silk or velvet surface that reflects light particles and looks rich and elegant. This design is ideal for a bedroom or office.
4. Artificially aged coating with bark beetle and craquelure plaster: after application and grouting, the walls get a pattern in the form of cracks and scuffs. This solution is especially relevant for the interior in a classic or retro style.
5. Monochromatic texture with the use of "bark beetle".

How to finish the walls?

Decorative plaster in the interior of a living room, bedroom or other room will combine an ideal appearance with durability only on condition correct application. One person can handle the job; For a better understanding of the sequence of work, you can use the diagram.

Wall covering algorithm:

• preparation of the base with the removal of large defects;
• applying an acrylic-based primer for disinfection and increased thermal insulation;
• preparation and tinting of the mixture for plastering;
• applying the first layer with the creation of a relief, for which a spatula, roller or sponge is used;
• drying the surface and re-coating the wall to create the desired ornament;
• applying a protective varnish.

Textured plaster in the bedroom, living room, office or kitchen - good decision, allowing you to create a refined and unique interior that will emphasize all the advantages of the room. This finishing material requires a minimum number of tools (trowel, brush, mixing container and gloves), and thanks to the ease of application, you can treat the walls alone in a few hours.

More information about the use of decorative plaster in the interior can be seen on the video: