If earlier a shower cabin in an apartment was considered a luxury, now times have changed. Many new houses with small apartments are being built. And a shower cabin in such apartments is not uncommon, but simply a necessity. The walls of shower cabins can be made of impact-resistant glass, or plastic - acrylic. Pallets are made of ceramics, artificial stone, enamel. If the walls in the shower are glass, then a week later, limestone appears on them, and on the acrylic surface we will see yellow stains. How to clean the shower stall without damaging the surfaces - you will learn from simple and necessary tips.
If you want your shower to look superb, never use abrasive and aggressive detergents when cleaning the cabin. Also, you can not use powdered products. A powerful cleaning gel, such as Sanox, should never be used - it is detrimental to acrylic, ceramics, and enamel. It is also not recommended to use metal sponges, hard brushes, as you can easily scratch the surface with them. Acrylic is especially afraid of hard brushes - it scratches and subsequently fades. How to clean the shower cabin from limescale, dirt, stains, and rust? What will help us with this:
- A rubber or polyurethane squeegee (it is called a "rail") will help a shower cabin, on one side of the squeegee there is an elastic band, and on the other - a sponge. It is convenient to use a scraper to drive the water down until the plastic or glass is completely dry.
- Melamine sponge. It perfectly removes limescale deposits on the walls and parts of the shower. It perfectly removes greasy marks, streaks, and dark stains of dirt. And with this sponge you don't need any detergents - just wet the corner of the sponge in water and wipe the surface.
- If the cabin is plastic, a liquid detergent for baths made of acrylic bought in any household store will do. Window cleaner is suitable for glass cabins. Apply the product to the surface, wait 15 minutes, and then wash off with a rubber or polyurethane scraper. Wipe dry with a non-woven cloth (microfiber, cellulose, bamboo, or latex).
- If the cabin is very dirty, and the cleaning was carried out a very long time ago, in this case, a product in the form of a paste or thick cream will do. They can also be found easily at hardware stores. Apply in a thick layer, leave it for a while (read the annotation on the container), then remove it with a scraper and rinse it off with warm water. Wipe dry with a cloth. Thus, we remove limescale, rust, and mold.
- If there is no special paste at hand, and the cabin is very dirty, it is recommended to make the following solution: 1 glass of warm water + 20 grams of soda + 20 grams of citric acid. Make a solution, apply to shower doors and walls, and rinse off after 10 minutes with a scraper and then with a non-woven cloth.
- Wash the shower cubicle after yourself - then you don't have to remove plaque every week and devote a lot of time to cleaning. Light plaque can be washed off without much difficulty with any dishwashing detergent. Then the surfaces are wiped dry.
- Keep the shower door open a little to keep fungus out of the walls and joints. Ventilate the bath from time to time.
- It is recommended to rinse the shower walls and doors after each shower. Do this first with a strong hot stream of water and then with cold water. It is advisable to wipe the walls and the door with a rag. The pallet to be cleaned must also be wiped dry.
Home remedies for cleaning the shower stall
Before washing the shower, we remove foreign objects from it: soap, sponges, etc. There are many folk remedies that can be used to clean the shower. If you are allergic to chemicals, or you trust folk remedies more, these options are suitable for you.
Citric acid, or lemon
Citric acid is an excellent remedy for cleaning the shower cabin with folk remedies. If we want to wash the cabin from soap solutions, and from plaque, we need 1 tbsp. Stir a spoonful of citric acid in a glass of hot water. Citric acid can be replaced with ½ lemon. With a sponge or cloth, we begin to wash dirty surfaces. If the door or the walls of the shower have not been washed for a long time, leave the solution for 10-15 minutes, and only then rinse and dry the surfaces.
Vinegar
Another folk remedy for washing the shower stall is ordinary vinegar. It will help in the fight against rust, soap stains, and plaque. Prepare a solution: a glass of water + 1 table. spoon of 9% vinegar. Apply to problem areas, and wait 10-20 minutes, then remove all the dirt with a scraper, rinse with water, and dry. This recipe can be used many times without harming plastic and glass.
Vodka or alcohol
Vodka or alcohol is a very effective tool for cleaning the cab from dirt and limescale. We dilute vodka with water, in a ratio of 1/1, or take 2 tables for ½ glass of water. tablespoons of alcohol. With this tool it is good to clean the walls of the shower, as well as all chrome surfaces, hoses, and so on.
Vinegar and ammonia
If mold appears on the walls of the shower stall, in this case it is better to clean it with such a means for washing the shower stall: we take vinegar 9% and ammonia in a ratio of 1/1. A place with mold is treated with this solution, then we wash off everything with a soda solution (1 teaspoon of soda in ½ glass of water). Wipe dry with a soft microfiber or latex cloth.
The video shows a story about the proper care of the shower stall.
Cleaning the shower cabin from plaque at home is not as easy as it might seem. The fact is that these plumbing boxes are created from a variety of materials that differ from each other in the rules of operation and the nuances of cleaning.
Which cleanser should you choose?
Depending on the properties of the surface to be cleaned, an individual household cleaning product is selected that is suitable for a specific surface and coating. The shower room consists of different materials:
- box body and doors are mainly made of plastic or glass;
- the shower head is made of chrome-plated steel or aluminum;
- the drain pan can be acrylic, metal or ceramic.
Therefore, every detail requires careful cleaning.
Abrasives
Whatever material was used in the manufacture, it is strictly forbidden to wash the shower cabin with abrasives. Such funds are capable of spoiling the appearance of a plumbing device in a short time and nullifying all efforts to care for it. Abrasives scratch the surface during cleaning, causing irreversible damage.
Mechanical methods
If the choice fell on a mechanical method of removing limescale, you can use a special scraper made of rubber or polyurethane or an ordinary sponge (rag).
When choosing a cleaning agent, you should avoid formic acid and gasoline and acetone-containing chemicals.
A cleansing spray will be the best solution. It will successfully remove even very pronounced dirt and does not require rubbing during use. You just need to spray it on the surface that needs cleaning and then rinse with running water.
Shower cabin cleaning
Obviously, small contamination, unlike stubborn plaque, can be easily and quickly washed off. The most correct solution is to prevent the formation of unwanted deposits, for this it is necessary to thoroughly wash the cabin after each visit. In this case, the problem of chronic plaque accumulations simply does not arise.
Basic rules of operation
To keep the shower stall clean and fresh, there are a number of rules:
- After taking a shower, rinse the walls and the tray first with hot, then cool water to completely wash the shower stall of soapy streaks.
- Clean the walls of the box with a rubber scraper to remove moisture.
- Use a soft cloth to wipe the entire cab dry.
- Clean the shower weekly with special gels.
- Clean the plumbing fixture thoroughly monthly by brushing every hard-to-reach area.
- Metal parts are washed and thoroughly wiped after each use.
This regular maintenance will ensure that your cab looks pristine and radiant. However, if the plumbing device is in disrepair and has acquired an unpresentable appearance, prevention will no longer help: it will require a more serious impact on pollution.
Cleaning the plastic walls of the box
Plastic surfaces are particularly susceptible to dirt, as the material is absorbent. In the process of caring for such shower cabins, aggressive detergents should be excluded:
- acidic;
- including formaldehyde;
- having solvents in the composition.
The steam cleaner perfectly removes dirt, getting rid of dirt even hard-to-reach places.
Washing the cabin pallet
If the pallet is made of porcelain stoneware, it is enough to wipe it dry with a soft microfiber cloth, to which the agent for processing artificial stone has been previously applied.
If the pallet is acrylic, you should choose a safe, gentle product that does not contain abrasive substances.
Suitable chemicals are creams and gels that gently remove soap streaks and limescale deposits.
Cleaning the enamel drip tray is fairly straightforward as the material does not absorb dirt. Various powders, gels and sprays are used for washing.
Removing lime from mixers
The chrome steel used in the mixer taps is particularly susceptible to lime deposits. In addition, steel is easily damaged and loses its luster. Therefore, gels and creams that do not contain abrasives are most suitable for the treatment of capricious metal.
If the mixer is aluminum, it also requires careful handling and the absence of abrasive substances in the composition of the care products.
Folk remedies and their use
Eco-friendly, safe and cheap, these methods of cleaning shower stalls are very popular.
Citric acid composition
Citric acid perfectly copes with any deposits on glass and plastic surfaces, including soap and lime. To prepare the cleaning composition, dissolve 1 packet of citric acid powder or juice of 1 lemon in ½ glass of water. Spray the resulting product using a spray bottle throughout the cabin and, after waiting about 15 minutes, rinse with cool water. If plaque remains, the acid concentration will need to be increased.
Soda method
Carbonated drinks are a great way to clean your shower drain. Coca-Cola is best suited for this purpose, but you can use Sprite or Fanta. Any of the drinks is applied generously to the surface to be treated and left for 30 minutes. Then wash off with cool water. Soda is a thunderstorm of mineral, lime deposits and rust.
The use of alcoholic tinctures and vodka
Soap stains that have covered the shower stall can be easily removed by ethyl alcohol. Tincture or vodka is mixed with water in a ratio of 1 to 2.
The resulting composition is effective against glass surfaces and chrome products.
Ammonium in the fight against soap deposits
Soap stains are perfectly removed with ammonia. It is used alone or in combination with vinegar and baking soda: ½ cup of ammonia should be mixed with 1 tablespoon of vinegar essence or baking soda in 1 liter of water. Then apply the product to the dirt, leave for 1 hour, and then thoroughly wash the shower cabin with running water.
Baking soda and hydrogen peroxide for cleaning plumbing fixtures
This tool will not only perfectly cope with lime, but will also help clean mold from every corner of the shower stall: soda is abundantly applied to the places of pollution, left for 1 hour. After waiting for the required time, carefully wipe the treated surfaces with a sponge and apply hydrogen peroxide, after which the box is ventilated. This technique also saves the cabins from fungus.
Vinegar essence as a remedy for pollution
Soap stains and lime removes the remedy available to everyone - vinegar. The liquid is diluted in water in a ratio of 1 to 1, after which it is applied to the places of accumulation of dirt. The composition is left for at least half an hour. After the required time, the treated surfaces are cleaned with a sponge and rinsed with running water.
Cleaning surfaces with toothpaste
Every home has toothpaste in stock - an unrivaled cleaner for all kinds of dirt. The method is simple: the agent is applied to the contaminated surface using a regular sponge. If the dirt is old, the paste is left for 1 hour, after which it is thoroughly washed off.
Recently, shower stalls have become widespread. They are more compact and more practical than conventional baths. It may seem that looking after the booth is very simple. But in fact, you need to make an effort to get rid of soapy deposits, rust and dirt. By regularly cleaning your shower room, you can maintain its pristine appearance for a long time. For these purposes, many methods have been invented that can be done at home.
Shower cubicle - a place that should always be clean, because high humidity creates excellent conditions for the multiplication of various microorganisms. If the shower is not washed regularly, mold and limescale will appear on the surface.
There are several types of booth care:
- Regular cleaning involves doing certain things after each visit to the shower. It is necessary to thoroughly wash off the soapy foam, rinse the booth with hot water and then cold water. Then wipe the surface with a rag. If you do not ignore regular cleaning, then subsequently washing the shower will be much faster.
- Periodic cleaning is carried out at intervals from one week to a month, depending on the attendance and contamination of the cabin. At this stage, you will have to use additional tools that are able to cope with more serious pollution. Various detergents, sponges and brushes will be used. Rubber glass scrapers work well for cleaning the shower area. After the procedures, it is necessary to thoroughly wipe the surface of the booth with a dry cloth, without leaving water drops.
- Thorough cleaning may not be required if the previous two types of cleaning are thoroughly carried out. The need for such cleaning arises when the shower has not been used for a long time or it is very dirty. In the process of washing, it is necessary to use strong means and be sure to protect your hands with rubber gloves.
Cleaning different surfaces in the shower
Shower cleaners can damage the finish or leave streaks if not used on the surfaces for which they are intended. It is necessary to approach the cleaning of the walls, doors, pallet and faucets of the shower stall in different ways.
Cabin walls
Most often, shower walls are made of plastic and polystyrene. These materials should be washed regularly as they may darken over time. For these purposes, the following are suitable:
- polyurethane scraper;
- synthetic sponge;
- soft cloth made of non-woven fabric.
To remove limescale from the walls, you will need a product that does not contain active acids, alkalis and formaldehyde. It is convenient to use aerosols, pastes and liquids.
Doors
For the manufacture of booth doors, glass is usually used. You can wash such surfaces with almost any means, using window sprays and folk recipes.
If you don't have a glass cleaner on hand, you can mix 100 ml of vinegar or citric acid with 100 ml of water. Apply the resulting solution to the shower door and wait 15 minutes. Rinse the glass panes with plenty of water and wipe with a sponge. After that, you need to wipe the doors dry with a rag.
Tile
You can find shower stalls in which the walls and the tray are tiled. You can wash the tiles, like the acrylic tray, with almost any bath cleaner.
The joints between the tiles should be especially carefully processed, since this is where mold usually forms. It is necessary to regularly clean the tile joints with cleaning powders and special detergents for cleaning tiles.
Plumbing
Shower head, faucet, faucet and stall frame are made of chrome-plated steel. After each trip to the shower, you need to wipe these elements dry. To keep them clean, you must use a non-abrasive metal cleaner:
- If the problem is running, and the crane is covered with a coating so that it stops turning, you must use the folk method. Soak a rag in vinegar and wrap it around the tap. To prevent the vinegar from evaporating, cover the rag with cling film on top. Leave it on for a few hours. This will soften the limescale.
- To clean the clogged holes in the shower head, you need to warm up the vinegar and apply it to the shower spray. Leave on for 15 minutes and rinse with water. Then you need to unscrew the spray and clean the holes with a needle or toothpick.
Pallet cleaning
To wash the shower tray, you need to find out what material it is made of. The most common - acrylic, ceramic, enamelled steel or cast iron.
Acrylic
The most difficult thing is to clean the acrylic pallet. This material does not tolerate the use of coarse brushes and scouring powders with fine abrasive particles. In addition, aggressive solutions containing acids and alcohol must not be used. If the purchased product contains alkali, formaldehyde or formic acid, then it is better to postpone it until another case.
You can wash the acrylic tray with laundry soap. To do this, you need to lather a sponge and wipe the surface. Then rinse the pan with plenty of water.
Greasy and limescale deposits are removed with toothpaste. You will need to apply it to contaminated areas and wait a few minutes. Then wipe the pallet with a sponge. Instead of a paste, you can also use dishwashing liquid.
In addition to folk remedies, there are also creamy mixtures created specifically for cleaning acrylic bathtubs. They must be applied to the pallet with a sponge or soft cloth and rinsed thoroughly after 15 minutes.
Enameled
These pallets are usually made of cast iron or steel and enamelled. You can use store-bought gels, sprays, and powders to clean them. For example, Komet, Pemolux and others.
Or you can make your own cleansing mixture. Add 2 tablespoons of baking soda to 100 ml of lemon juice. Apply the resulting solution to the enamel and wait 10 minutes. Then rinse the drip tray and, if necessary, wipe the surface with a sponge.
Lemon juice will help to add shine to the chrome steel elements of the booth.
Folk remedies
Oily, limescale, soap stains constantly remain on the shower stall. High humidity can cause rust and mildew. To prevent these unpleasant consequences, it is necessary to carry out regular cleaning.
If you do not want to spend money on purchased detergents, then you can use proven folk methods.
Lemon acid
Lemon juice has long been known as a good helper in the fight against grease and limescale. To cleanse the shower with this remedy, you must:
- add 1 tablespoon of citric acid to a glass of hot water and stir thoroughly;
- moisten a sponge in the prepared solution and wipe the contaminated areas;
- rinse the booth with running water.
If the shower is very dirty, then you will need to leave the solution for 10 minutes and rub the surface with a rag or soft brush. You can use fresh lemon juice instead of citric acid.
Vinegar
Acetic acid solution will help to wash the shower stall from limescale. To do this, mix equal proportions of vinegar and water. Then apply the mixture to the inside of the booth and wait 10 minutes. After that, rinse the solution with running water and wipe the surface dry.
You can also remove rusty and yellow stains with vinegar. You will need to pour acetic acid into a spray bottle and spray it over the surface of the contamination. After half an hour, you need to wash off the vinegar along with the rust. Hot vinegar can also be used to clean the holes in the whirlpool jets.
Soda
Soda can be used only on those surfaces on which the use of substances with abrasive properties is allowed.
Do not use baking soda to clean acrylic trays.
In order to wipe off dirt with soda, you must first moisten the surface. Then gently apply baking soda to the dirt and rub the area with a sponge or soft cloth. After that, it is required to wash off the remnants of the substance and thoroughly rinse the booth with running water.
Vodka
One of the most effective shower stall cleaning products - it's vodka. You need to mix 2 tablespoons of water and 1 tablespoon of vodka. Apply this solution with a sponge or cloth to dirt. Wipe the surface thoroughly and rinse off the composition with running water. Then wipe the shower dry.
This method is ideal for cleaning doors and chrome cab elements. Vodka is able to cope with both limescale and soap stains.
Toothpaste
At home, this tool allows you to cope with plaque in the shower. To do this, you will need to apply a paste or tooth powder to the contaminated areas and leave for 15 minutes. Then rub the surface with a soft brush and rinse off the rest of the product with warm water.
The main advantage of this method is the lack of abrasive properties. Therefore, it can be used for cleaning metal and acrylic surfaces.
Regular cleaning won't take long, but it will eliminate the need to scrub away stubborn stains.
Housewives often have to solve the problem of how to clean the shower stall from limescale without spoiling the delicate coating of the pallet or the appearance of the door.
Using showers instead of bathtubs requires special attention. High humidity and temperature, water quality negatively affect the condition of surfaces and equipment. The complexity of the design and the use of different materials add to the difficulties in maintenance. Such equipment can be performed using:
- plastic;
- metal;
- glass;
- artificial or natural stone;
- acrylic;
- tile.
Each of them requires the use of a special type of household chemicals, which will not only clean the surface, but also will not spoil the appearance. To wash the shower quickly, without spending significant effort and saving cleaning compounds, it is advisable to follow a few simple rules during operation:
- after each use, the shower must be rinsed with cold water, especially carefully hard-to-reach places;
- carry out weekly surface treatment with special cleaning gels;
- Perform general cleaning for a couple of months using a soft brush or steam cleaner.
These simple yet effective measures will help neutralize minerals and salts that can form in your tap water.
Cleaning products
Today, from a variety of different cleaning compositions, the hostess can choose factory-made powders, liquids or gels, or improvised means.
Special means
The list of finished products that can clean the surface from scale may include the following:
- Tilex, a specialized composition with a light aroma and antibacterial properties, effectively removes lime, is safe for all types of surfaces;
- Cif, a versatile cream paste with a thick consistency, has anti-abrasion properties, which allows you to clean acrylic trays and plastic;
- Sanelit, another option for household chemicals, safe for sensitive surfaces of different types, the disadvantage is an excessively pungent odor;
- Acrylane, a domestic drug against scale, dirt and rust, a container with a spray bottle makes it possible to use economically;
- Aron, a chemical composition intended for cleaning glass, after 30 minutes after application, the inside must be washed with water, the outside must be wiped with a soft cloth;
- Toilet duck, a popular toilet liquid, can be used to clean glass, sinks, tiles with increased water hardness, not recommended for nickel-plated elements due to its high acid content.
The list of such compositions can be more extensive, the list includes only those that are most often recommended by experts.
Folk remedies
The advantage of folk remedies is their greater availability with comparable effectiveness. Lime can be removed using several well-known formulations:
- a solution of citric acid, which is used to clean glass, a tablespoon is dissolved in a glass of water and poured into a container with a spray bottle, after application you need to wait 10 minutes, then rinse the solution with cold water;
- toothpaste, unlike powder, does not contain abrasive particles, does not allow scratches when processing nickel-plated, chrome-plated surfaces, after application it is rubbed with a sponge with a soft structure, if the contamination is old, rubbing is performed after a few minutes;
- a combination of soda and peroxide, the area to be cleaned is poured first, left to absorb, then removed with a sponge, then peroxide is applied and allowed to dry;
- vinegar, another effective remedy for lime deposits, to remove plaque, a solution is prepared in a 1: 1 ratio, after application they wait 30 minutes and rinse off;
- ammonia, for a more effective effect, it is used in combination with vinegar and soda, for 2 liters of water there is half a glass of alcohol, a tablespoon of soda and vinegar;
- whiteness, a universal option, does not spoil any of the listed materials, copes well with any type of contamination, including lime deposits, the solution is applied to the contaminated area and kept for up to 4 hours, then washed off with a strong pressure of cold water and wiped dry.
The popular carbonated drink Coca-Cola finds an unusual application in this area. Its lovers should know that the effect of the impact of Cola is comparable to that of soda or vinegar. The drink is applied to the area with scale and after half an hour is washed off with a strong, cold stream. The chemical composition allows you to completely remove the most stubborn dirt.
Cleaning the shower cabin from limescale
To clean surfaces without streaks and damage to their appearance, it is necessary to take into account the peculiarities of the effect of different types of household chemicals on materials and its structural elements.
Glass cleaning
Usually glass is used to make shower doors. This is the easiest structural element to maintain. It can be cleaned with any compound recommended for cleaning windows. From solutions prepared at home, you can use citric acid or ammonia. The procedure is simple:
- washing liquid is applied with a spray bottle;
- stays on the treated area for several minutes;
- if necessary, it is removed with a special scraper;
- then wipe dry with a soft cloth.
This allows you to quickly remove limescale deposits, soap residues, and other types of dirt, without harming the treated surface.
Pallet cleaning
Cleaning the pallet is more difficult due to the variety of materials that are used to make it.
- Acrylic sinks are sensitive to abrasives, and scratches caused by them become contaminants over time. Therefore, gentle agents are recommended for this material, for example, white toothpaste, citric acid or juice.
- Natural or artificial stone. The first option is less demanding to care for, it retains its original color for a long time, does not need strong household chemicals. The disadvantage of the second is a relatively rapid loss of a given shade, which can be restored with a potent toilet care product.
- It is not recommended to clean enamelled trays with compounds based on sulfuric or hydrochloric acids, alkalis or formaldehyde. Pemolux or Komet are better suited for enamel care. From homemade preparations, you can use a mixture of baking soda, citric acid and a little water.
After processing, the sink must be thoroughly washed under high pressure in order to completely remove the applied agent.
Tile cleaning
If the floor and walls of the cabin are tiled, it is possible to use any household chemicals for tiles. It is insensitive to strong chemicals and is relatively easy to clean. When processing, you should especially carefully clean the joints between the tiles, where plaque most often accumulates.
Neglected case: how to clean up old stubborn plaque
A remedy for old limescale deposits for showers must be strong. These include cleaning pastes and vinegar solutions. First, the blotted area is treated with a paste, which is applied for half an hour. Then it is washed off, and the remaining dirt is removed with vinegar. A rain shower watering can especially often suffers from stone. For cleaning, it must be removed and placed in a citric acid solution overnight, then scrubbed and rinsed.
Recommendations for proper care of your shower stall
Correct care is, first of all, a timely cleaning. Recall that the following types of cleaning are recommended for showers:
- regular, after each use;
- periodic, every two weeks;
- general.
However, the latter may turn out to be superfluous if the two previous ones are carried out in a timely manner. The need for it arises when the equipment has not been used for a long time or with old pollution. In addition to cleaning, measures taken to ventilate the cab provide significant help in preventing deposits. There is nothing complicated here, the moisture will dry faster if you leave the doors open after use.
Prevention
The only and sure way to prevent limescale is regular and proper care. The less glass, walls and equipment interact with moisture residues, the less chances for limescale to appear.
Cleaning the shower cabin (video):
Showers are gaining in popularity due to their compact size and practicality, but they require special care, since high humidity and improper cleaning lead to the formation of all sorts of pollution. In this regard, the housewives have a reasonable question: how to wash the shower cabin from soap stains and limescale?
Showers are compact and easy to use, but prone to various types of contamination. Difficulty in care due to the combination of different materials that require the use of several products and cleaning methods
Cleaning different surfaces of the booth
A shower cabin is a complex device that consists of several elements made of various materials. To clean it correctly, you need to choose products that will effectively and gently clean all surfaces.
Pallet
When cleaning the shower tray, take into account the material from which it is made. The most commonly used are acrylic, cast iron or enamelled steel.
Acrylic coating is considered the most "delicate", therefore, it is not recommended to use acids, hard washcloths and scrapers, compounds with abrasive particles, alcohol, and other aggressive substances for its processing.
Optimal products for acrylic: dishwashing liquid, laundry soap, toothpaste, special household chemicals.
Enamelled cast iron and steel pallets can be cleaned with household chemicals (Comet, "Pemolux") or folk remedies (eg vinegar, citric acid)... In this case, it is not recommended to use metal scouring pads, hard sponges and strong abrasives.
Tile
Some models of cabins are not equipped with special walls, but are adjacent to the pallet and walls, which are tiled. To clean such a surface, use any bath products or special preparations for tiles. In addition, pay attention to the question of how to clean the joints between the tiles, because it is there that dirt often accumulates and mold multiplies.
Doors and walls
For the manufacture of walls, polystyrene or plastic is used. Soap stains, water drops, and makeup traces often remain on these surfaces. And with irregular or improper care, they darken and lose their presentable appearance.
You can wash the walls with products that do not contain formaldehyde, chemical acids, alkalis. Ideal - special preparations in the form of sprays or liquids for cleaning windows.
Use a soft sponge, polyurethane scraper or microfiber cloth to clean.
Shower doors are made of glass. To clean them, use household chemicals (window cleaning compounds) or folk remedies (citric acid, alcohol solution, etc.) that do not contain abrasive particles. After cleaning and each shower, carefully wipe the doors from water drops and residues of detergents to avoid the accumulation of dirt.
Folk remedies
You can clean the shower stall from limescale at home using folk remedies. With their help, you can wash all surfaces without fear of damage.
Toothpaste
Toothpaste will help remove limescale from the acrylic surface. Apply the product to the area of contamination and leave it on for 15 minutes. After the allotted time, wash everything with warm water and wipe dry with a soft cloth.
Soda
Cleaning procedure:
- Moisten the surface to be washed slightly.
- Apply baking soda on a soft sponge and treat the dirt. Avoid applying strong pressure.
- Rinse off the remaining substance with running water.
In order to whiten the pan and get rid of the fungus at the same time, mix baking soda with hydrogen peroxide. Treat all surfaces well with the resulting mixture, then rinse and wipe dry.
Vinegar
A solution prepared from equal proportions of vinegar and water will help to wash out the limescale. Apply the resulting product evenly to the surface (it is better to do it from a spray bottle) and leave for 10 minutes. Then wash the walls with running water and wipe dry.
Sweet soda
Soda - "Coca-Cola" or "Sprite" will help get rid of limescale on the shower stall. Pour the selected drink generously over the surface, let stand for 30 minutes, and then rinse. Wipe dry after cleaning to prevent new plaque build-up.
Lemon acid
Cleaning procedure:
- Add 1 tbsp to a glass of hot water. l. citric acid and mix well.
- Soak a sponge in the resulting solution and treat any dirt.
- Rinse surfaces with water and wipe dry all drops.
Alcohol solution
In a container with a spray bottle, mix vodka with water in a 1: 2 ratio. Apply the resulting solution to glass surfaces or chrome plumbing fixtures and wipe with a soft cloth. Such a remedy removes stains of different nature, restores shine and shine.
Ammonia
To remove soap stains will help ammonia. It can be used to prepare an aqueous solution, as well as as a constituent element of a more complex product.
Cleaning algorithm:
- In a container, combine half a glass of ammonia, 1 tbsp. l. soda and 1 liter of water.
- Mix all ingredients thoroughly.
- Apply the resulting product to the dirt, leave for 60 minutes.
- Wash the shower stall thoroughly, removing any residual detergent.
Household chemicals
Special household chemicals will help you quickly and easily wash the shower stall. When choosing, give preference to sprays, gel-like or liquid products - they will not scratch the surface, but at the same time they will effectively get rid of plaque and stains. The most popular remedies are: Cif, Mister Muscle, Sanelit.
Specialized household chemicals will help to keep the shower stall clean and shiny. Before use, make sure that this or that product is suitable for the surface to be cleaned.
You can deal with dirt with melamine sponges. They are easy to use and, according to the reviews of the hostesses, they effectively cope with the task assigned to them.
Cleaning instructions:
- Soak a sponge in water and squeeze well.
- Wipe all surfaces thoroughly to remove dirt.
- Dry the cabinet with a microfiber cloth to remove any remaining moisture.
Melamine sponges effectively deal not only with limescale and soap stains, but also with rust, yellowness and mold.
Prevention
In order for the shower to always look clean and tidy, follow the rules for its use, and also provide it with proper care:
- After showering, rinse all surfaces with cool water to remove residual detergents or cosmetics.
- Wipe glass and plastic parts with a rubber scraper.
- Wipe down the pallet, walls and doors with a soft dry cloth.
- Clean surfaces with special gels or sprays once a week.
- Perform a general cleaning periodically, thoroughly cleaning every corner of the shower stall.
Folk remedies and special household chemicals will help to wash the shower stall from all kinds of pollution. To preserve the original appearance of glass and plastic, provide them with proper care and carry out preventive cleaning.
Video
In order to understand in more detail the nuances of cleaning the booth, watch the videos presented:
A young mother, wife and part-time freelancer. Being a lawyer by training, she is used to collecting and providing the most complete and reliable information. Constantly improving in the professional field and striving for personal growth and development.
Stretch ceilings made of PVC film are capable of withstanding from 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don't have to worry about leaks from the neighbors on top.
Before removing various stains from clothes, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of the thing from the wrong side for 5-10 minutes. If the material retains its structure and color, you can move on to stains.
Threads made of gold and silver, which in the old days were used to embroider clothes, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the state of the necessary fineness. Hence the expression "pull (breed) gimmick" - "engage in long monotonous work" or "delay the execution of the case."
The easiest way to remove scale and carbon deposits from the soleplate is table salt. Sprinkle a thick layer of salt on the paper, heat the iron to maximum, and press the iron several times over the salt mat using light pressure.
The habit of using the washing machine "sparingly" can lead to an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on the inner surfaces and actively multiply.
There are special traps to fight moths. The pheromones of females are added to the sticky layer with which they are covered, attracting males. Sticking to the trap, they drop out of the reproduction process, which leads to a decrease in the moth population.
Fresh lemon is not only suitable for tea: clean the dirt from the surface of the acrylic bathtub by rubbing with half a cut citrus, or quickly wash the microwave by placing a container with water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.
If the first signs of gestation appear on your favorite things in the form of untidy pellets, you can get rid of them using a special machine - a shaver. It quickly and efficiently shaves off clumped fabric fibers and makes things look worthy.