What types of decorative corners are there, methods of application, installation rules and examples of use in the interior. Content One of the most problematic areas in interior decoration is the outer corners.
It is quite difficult to paste over them with high quality, often the wallpaper is pulled up at the corners, it is easy to damage the corner, touching it when rearranging furniture or ...
Decorative corners made of aluminum, wood or silicone for wall corners: how to decorate under or on wallpaper, what is the best way to glue and fasten
What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.
Decorative corners for walls
One of the most problematic areas in interior decoration is the outer corners.
It is quite difficult to paste over them with high quality, often the wallpaper is lifted at the corners, the corner can be easily damaged by touching it when rearranging furniture or carrying any solid large object.
Decorative corners help in solving these problems.
The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, make the transition from one material to another, close the ends of tiles or panels.
Where are applied
There are many options for using corners in the interior. They can be used to decorate both outer and inner wall corners. Some difficulties arise when finishing corners other than 90 °; this requires special, so-called. folding corners. For finishing the curved surface of the corner, flexible, "arched", corner profiles are used.
The most common ways to use decorative corners:
- Adjoining the window slope to the wall. It is extremely rare to see a slope, the near edge of which is not closed by a corner. Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often happens at the outer corners. In addition to the technical one, the corner profile also carries an aesthetic load. The use of a white corner completes the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
- Doorway decoration. The corners can also be used when decorating a doorway when the wall thickness is greater than the width of the door frame. In this case, additional strips are installed to the door, the adjoining of the end of which to the wall is closed by an angular element matched to the color of the door.
- Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall decoration from mechanical damage, for example, an accidental impact with a heavy oversized object. It helps to preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies cleaning the room. Often hand marks remain on the outer corners, which are easier to remove from plastic than from wallpaper. Correctly selected contrasting corners avoid boring and monotony of the interior.
- Decoration of openings. In interior design, instead of doors, an opening is often left, for example, between the kitchen and the living room. The corners serve to decorate and protect the corners.
- Outside corners of walls clad with tiles or wall panels. The corner profile covers the ends of the tiles, because they differ in color from the face of the tile. If the tile is cut to size, and the cut edge is not sanded, it is easy to cut against such an angle. When mounting the corner on the panel, they cover the corner joint. The use of a special corner profile for these purposes is not always convenient, then decorative corners are used.
- Decoration and protection of corners of gypsum plasterboard structures, for example, racks or shelves.
- Furniture decoration, mirror framing. In addition to decorative functions, it protects the edges from chipping.
Varieties according to materials of manufacture
Corner profiles are made of various synthetic materials, MDF, wood, metal. Its appearance, technical characteristics and scope of application depend on the material of the corner.
Metallic
Manufactured from aluminum, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are subdivided into polished, anodized and with a decorative coating, usually imitating wood, but can also be painted in different colors. They are mainly used in the manufacture of furniture, less often in the decoration of premises. To protect the ends of the furniture boards, they are covered with a multi-shelf corner, one of the shelves of which completely covers the end, the second slightly enters the plane. Unpainted profiles are suitable for framing mirrors and glass-covered paintings or posters.
Metal corners can be wall-mounted as a base for lightweight Armstrong or PVC-panel suspended ceilings. The aluminum product is attached to the steps as anti-slip pads and edge protection against chipping.
Wooden finishing
They are made from various types of wood, including valuable ones. Wooden corners are used to complete interior decoration made of wood, for example, wall cladding with a block house or clapboard.
With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or papered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because they are fragile and can crack at the slightest effort to bend or straighten them.
Transparent silicone corners for wallpaper
If necessary, protect the corner and preserve the wallpaper pattern, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present. Reduces the child's risk of injury from hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.
Polyurethane
They are smooth, with embossed ornaments and profiled. Smooth are similar to ordinary PVC corner profiles, differing from them in a greater thickness of the shelf. A three-dimensional ornament is often reproduced on the shelves.
For use in classic interiors, polyurethane profiles of complex cross-section, imitating gypsum stucco molding, are produced. On sale there are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, the smooth part is like wood, and the ornament is like gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.
Plastic colored
Made from PVC. Visually imitate wood, metal surface, or simply painted in one shade. The palette of monochrome corners contains about 30 shades. If necessary, a white profile can be used with special paints in the desired shade. In decoration, it is used everywhere, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.
MDF corners
They are 2 MDF strips glued together with a film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are fixed movably relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, straight and obtuse angles. They are usually used for wall cladding with MDF panels, but they can also be used instead of any other type of corners.
It is undesirable to use MDF corners in rooms with high humidity.
Decor of corners in an apartment: how to decorate corners in a room
The options for using decorative corners in the interior design of a room depend on many factors:
- Surface material. A white plastic corner glued to the corner of the clapboard walls will look ridiculous.
- Finish colors. A red element should never be placed in a room designed in pastel colors.
- General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior, a polyurethane, "stucco molding" profile, will not be suitable for a high-tech style.
- Purpose of the room. In the nursery, silicone corners are great. They will keep the corners intact and help keep your child safe from injury.
Design options for wallpaper
To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of about the same shade, you can choose the product to match the color of the walls, if different, to match the color of the wall at which the eye is more often directed. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room's finishing.
As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor, using an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When designing a strict laconic interior, metal corners will look good.
Solution for corners on slopes: the better to close up corners in an apartment
To complete the finishing of the slopes, corners are used in the color of the slope, it is almost always white. Often a sandwich panel serves as the materials for the slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or gypsum board. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen of such a width that these errors are closed.
The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly "unbent" - put on a flat surface or a large-diameter pipe and lightly press with your hands, moving along the corner.
During the cold season, the profile should warm up to room temperature before working.
Option for decor under the wallpaper
For walls covered with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, PVC, MDF, wood or smooth polyurethane profiles are suitable. The profile should be of a light shade, because dark may come out from under the wallpaper. Wallpaper is glued to it, the glue is allowed to dry, then, no earlier than the next day, they are mounted on the wall. The wallpaper on the corner must be glued in one piece, of such a size that the wallpaper goes onto the inner side of the shelves.
How decorative corners are attached
For the installation of the corner profile, various adhesives are usually used, much less often metal and wooden parts are fastened mechanically using self-tapping screws or nails.
What to glue plastic
For fastening PVC corners, the following are used:
- "liquid Nails";
- acrylic sealant;
- silicone sealant.
When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixing during drying. As a rule, such glue must be applied to one of the surfaces, press the second one, then remove, allow the glue to dry, and then firmly press the part to be glued.
For the installation of polyurethane products, you can also use liquid nails or special glue.
Finishing wooden corners in the apartment
The surface of the wooden corners must be protected with varnish or paint. The varnish will preserve the texture of the wood, the paint applied in a thick layer will hide it. If you need to give the wood any shade, while maintaining the texture, you should use a wood stain or tinting impregnation for wood.
Fasten wooden elements with liquid nails, carpentry glue or PVA. Can also be attached to finishing nails.
When driving a nail, the distance from the edge of the part to the nail must be more than 10 of its diameters.
How to glue a plastic corner on the wallpaper
The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the installation site is well glued to the wall, the wallpaper glue is dry. It is best to wait a few days after pasting the wallpaper and only then do the decoration using the corners.
How much dries
The drying time of the glue is indicated on the package, and rarely exceeds 12 hours. When gluing to silicone or acrylic sealant, it is advisable to keep the elements fixed for 24 hours.
Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to mount and dismantle, so you can experiment if you want.
Useful video
Angles play a bigger role in the interior than it might seem at first glance. It is enough to look at their uneven or "worn" surfaces to make it immediately clear: no one can call such a finish neat. Decorative corners on the corners of the walls, the slopes of door and window openings began to be used everywhere for repairs only in recent years. Until then, the materials used to cover the joints simply changed more often than the rest of the finish.
The transformative effect of a decorative element can be appreciated even in an empty room without furniture. By the type of location, they are classified into two types:
Also, the elements are classified into those that are imposed on the outer sides of the corners and those that are inserted into the inner ones. The latter can have semicircular shapes that "soften" the finish. You can make a corner with your own hands, or purchase it in a specialized store. Products are made mainly from plastic, MDF, but there are also more durable metal, stone options. Polyurethane effectively imitates various natural materials: wood, marble, sandstone, brick. Plastic corners are used not only as a decoration, but also as a durable finishing element that will “outlive” wallpaper or other less durable wall surface coating. There is also a "mystical" component to the question. According to Feng Shui, the places of "joints" of the walls are considered to be energetic kinks, which create an imbalance and negatively affect the perception of the situation, therefore, their edges are decorated with corners, "smoothing out" the sharpness.
What are decorative corners for?
The corners most often "touch" people passing by with their shoulders, elbows and carried objects. Accordingly, it is this part of the wall that is erased and scratched more than the rest. To protect the joint from mechanical stress, a decorative corner is attached to it - a special type of finishing materials, a special "overlay". It has two functions:
- Beautifying decoration;
- Protect the "sensitive" place.
In addition, finishes with these elements look neater and the interior feels complete. With the help of the material of execution, color and size, you can emphasize the features of the style used in the design of the room.
When applied
The corner part of the wall is covered with decorative elements in several cases:
- If the corner has visually noticeable defects: curvature, "dimples" or protrusions that have not been corrected with plaster;
- When a protruding part is in the way or is located near a "pedestrian" area. Accordingly, it will constantly be touched, erased, scratched. Over time, mechanical damage will become noticeable and negatively affect the sensitive wall decoration and its appearance;
- If the interior does not look complete without them;
- To prevent destruction of the outer corner of the building and to give the exterior a neat look.
The installation of the elements usually completes the renovation: they literally become the finishing touch to the design.
Size of plastic corners
The standard range of sizes of PVC corners starts from 10x10 mm and ends with 50x50 mm. A gradation is used between them with a difference of 5 mm. Details of non-traditional sizes are made to order. An angle of 90 degrees is observed between the two guides of the decorative element, at which all planes of the apartment must intersect. If you got housing with "curved" walls, then you need to make the appropriate measurements and contact the master with a request to make individual parts.
Decorative panels for the kitchen
Types of decorative corners on the walls
Corners are versatile finishing elements. They are applied in bathrooms, kitchens, bedrooms, balconies, offices and living rooms. Decorating is carried out using several types of elements:
- Arched, for plasterboard partitions;
- For ceramic tiles. This category also includes profile strips for the bathroom;
- Corners made of natural and artificial stone;
- Options made of wood;
- Special guides for siding (exterior design);
- Corners for ceiling and floor joints;
- Textured options;
- For outside and inside corners;
- Corners for door and window openings.
Each of the types is combined with a specific wall decoration and organically merges into specific styles. Corners decorate not only walls, but also fireplaces, stoves, furniture, "boxes" for masking communications and pipes.
Arched
Arched corners are used under plaster or glued on top of an already finished surface. "Inner" elements ensure straight lines. The corners for semicircular partitions are distinguished by increased flexibility, which allows them to bend them tightly to the curved surfaces of the base. If the decorative wall has a strict rectangular or square shape, then decorative elements can be selected from standard plastic options designed for simple walls.
For ceramic tiles
Ceramic tiles are used to decorate walls and floors in kitchens and bathrooms. At the corners, the tile joints are tightly sealed, they do not allow water to pass through, but they collect dust, dirt and grease (in the cooking area). Also, it is these places that are usually used by bacteria and fungi to organize their "breeding ground". Microorganisms will not get under properly processed seams, but they can easily arrange a comfortable "home" on their surface. When cleaning tiles, it is advised to pay special attention to these areas. The overlay of the corners allows to reduce the scope of work and to make the place of convergence of the walls reliably protected from the adhesion of dirt particles. In addition, the decorative element will competently mask uneven tile cuts, and options contrasting with the color of the tile will add chic to the room. The corners are divided into two types:
- Internal. They are used to decorate joints between walls and ceilings, floors, shower cabins, that is, "depressed" corners. Usually have a convex or concave shape (fillet);
- Outdoor. Used when machining protrusions.
Popular plastic for decorating tiles is not used, since the main coating can compete with polyurethane in terms of durability and strength. We need all the finishing elements to “age” approximately the same, otherwise, due to the worn-out corner, the tiles will have to be “disturbed” once again. Metal and ceramics are used to decorate tiled surfaces.
There are so-called "tape" corners. They are made of flexible plastic, produced in "bobbins", are highly flexible, and can be easily replaced if necessary. This option is ideal for quick repairs.
For outside and inside corners
Separately, the elements are classified into external and internal. The former are used to decorate protruding joints of surfaces. The latter are used less often in "concave" corners. The latter are not so badly in need of protection, so the overlays are only needed to decorate the finish. The inner corners are usually semicircular, concave or convex.
Textured corners
Textured variants vary in color and pattern. They are usually made of plastic. Often the corners imitate some specific material: bricks, marble or granite surfaces, porous stone, wood (wenge, cork, oak, cherry). A variety of shades allows you to choose a contrasting or background option for a particular interior.
Wallpaper under a tree: types, advantages and disadvantages +50 photos
Wooden
Wood corners are usually made of thin MDF boards, bamboo, cork or veneer. In terms of lightness, materials are not inferior to plastic. MDF is flexible, and a decorative layer with a protective film against damage is applied to the surface of the pressed sawdust. In veneer versions, the element is made from thin wood cuts, that is, it is more natural and has a natural pattern. Solid wood corners are denser. When glued to the surface, they will protrude slightly on it.
It is not recommended to use natural wood in bathrooms and kitchens. Before attaching the material, it should be covered with a layer of varnish. Wooden elements are most often made independently. Unfortunately, a cracked corner can deform, and crack from a strong impact. The natural beauty of the decorated surface will have to "pay" for a lower service life.
Corners for ceilings and skirting boards
Ceiling and floor skirting boards at the junctions of individual modules have a very unsightly appearance. No matter how carefully the sections are processed, they will slightly shake the aesthetic picture of the interior. Decorative corners are used to disguise them. In appearance, they differ from the wall options: they look like small overlays, which are designed to decorate a small area. For ceiling plinths with stucco molding in classical styles, special corners with monograms are acquired, repeating each bend of the connected straight lines. On ceilings, the use of elements is not mandatory, which can not be said about floors. Here the skirting boards are constantly in contact with the feet of guests and household members. Their "joints" can loosen, fray and become completely unusable. The corners will save the skirting boards from rapid wear.
In design compositions, the lower decorative elements sometimes overlap with the upper ones. This solution ensures the integrity of the composition, therefore, ceiling and floor skirting boards often have the same shape, respectively, and the corners for their decoration are selected identical.
Natural stone corners
Decorative elements made of natural stone are usually used to decorate the facades of houses. Due to the strength of the material, they serve as excellent protection against building collapse. However, with the popularization of the industrial loft, brick and masonry have become an organic addition not only to the exterior, but also to the interior of the house. Such corners will necessarily slightly "protrude" above the surface. Choose flat stones that will provide a neat look to the entire structure. They are fastened with cement mortar, that is, the corner will be monumental and set for ten years. Elements are combined with plasterboard walls, embossed plaster and wooden clapboard.
Artificial stone corners
Artificial stone corners are considered cheaper and more practical options. As a rule, the imitation is made of plastic. It repeats not only the color, but also the "rough" texture of the surface. PVC is flexible, often goes beyond the "boundaries" of the corner and creeps onto the wall itself. This solution is used in order to create the illusion of a natural setting, because real masonry usually does not fit the ruler. Combine the corner with wallpaper and the same plastic panels.
It's important to know. The most budgetary imitation of stone at the corners is considered to be dense wallpaper. Curly pieces are cut out of them along the contours of the pebbles and glued to the joint. Such an element will not protect the surface from scratches and damage, but it will cope with a decorative task.
Variants of using the corner profile for finishing corners
The corner profile is used to decorate the following elements:
- "Natural" joints between walls, which are in the vertical plane;
- Door and window slopes;
- Places of "convergence" of ceilings, floors and walls in horizontal planes with a concave shape;
- The corners of decorative partitions, including arched openings;
- Joints between shower cabins, fireplaces and other "monumental" (not involving movement) interior objects and walls, floors.
Mirror tiles in the interior: application ideas
A decorative element can "smooth" any "seam" at the junction of finishing materials. If earlier it was necessary to carefully process the sections so that they retain a beautiful aesthetic appearance, now they are allowed to have irregularities and chips that will mask the corner.
Finishing the slopes of doors and windows
Double-glazed windows usually have special corners in the kit, which complete the installation of the window. Door kits also often include door frames and trims. If the corners remain without additional protection, then you will have to pick and glue it yourself. The element will protect the slopes from damage and smooth the junction of two different materials. For example, the end of the wallpaper will eventually wear off and peel off. No matter how smoothly you cut the finishing material on the slope, it will look untidy without additional coverage. In doorways, the slopes can be scratched by furniture that is carried through them.
The best option would be to use PVC corners. It is easy to replace if necessary, and the surface texture can mimic any natural materials. By choosing a special shade, you can create an illusory transition between the wallpaper color and the window frame or doorway. Less commonly, veneer or bamboo corners are used.
Arched doorways
Arched openings, as a rule, have one of the classic shapes: with a semicircle on top. Not every material can repeat its contours. For example, solid wood corners can only be used to decorate straight lines. Smooth transitions are decorated with elements of flexible plastic, MDF, veneer or bamboo. All of the above options will easily repeat the contours of the arch, and complete the design of the doorway.
How to stick a plastic corner yourself
In addition to decorative corners, you will also need a bonding composition. For narrow elements, it is not recommended to use glue, the excess of which cannot be removed from the surface without leaving a trace. Before carrying out the procedure, the joint must first be cleaned of dirt and remnants of wallpaper or protruding pieces of finishing material. No corners will save an unnecessarily uneven and bumpy surface. Then the wall is measured. Measurements are accurately transferred to a piece of the corner. It is better to cut the material with a hacksaw with fine teeth. Do not forget about the joints between the corners themselves (in doorways, windows): two straight lines should end with cuts at an angle of 45 degrees. The "seamy" side of the prepared material is smeared with glue and applied to the wall. Hands tightly press the corner to the surface and hold until the bonding compound "grabs"
Conclusion
There is another type of decorative corners that adorn furniture (sofas, wardrobes, beds, cabinets). It is used, as a rule, to protect the joints of MDF or chipboard boards, which are especially sensitive to damage and begin to crumble over time. Special silicone corners save the little fingers of the household from constant blows against these surfaces. In interior design, the use of these elements is usually completed by the repair. Their installation is akin to the finishing touches of the brush on an almost finished canvas, when the artist, moving away from the easel, evaluates his creation with a critical eye and touches up individual areas to make the composition complete. Decorative corners have become an indispensable element in the design of the room, which emphasizes its neatness and beauty.
The correct geometry of the space can visually increase the volume and height of the room. Protruding corners, suspended ceiling structures, slopes and doors - vertical and horizontal joints of surfaces, maintain the proportions of the room.
Plastic wallpaper corners are glued on top for decoration, zoning and surface protection. Perforated products form and reinforce the junction line of the planes before the finishing putty.
Arched (with different sizes of shelves) products are used to frame curved surfaces.
There are improved modifications of PVC corners:
- flexible self-adhesive, repeating any given joint configuration (internal and external corners, arched surfaces)
- docking structures for corners formed by PVC panels, slopes
- combined with tape to facilitate the adhesion process when puttying
Creating a clean line isn't the only purpose of the corners. Aesthetics are combined with decorating cracks, irregularities, chips and giving the joint strength. Plastic will ensure safety under mechanical stress, will allow you to keep the protruding surface clean.
Advantages of PVC corners:
- create a neat look of joints, decorate complex curved surfaces, arches
- are resistant to abrasion, not under the influence of unexpected mechanical stress
- not subject to corrosion
- laminated outer coating film is inert to aggressive chemicals and gases
- easy maintenance, do not require additional operating costs (painting)
- low price compared to analogs made of metal or polyurethane
- service life is unlimited
- expanded range of colors
- resistant to moisture (can be used for finishing corners in kitchens, sanitary and bathrooms)
- the possibility of using products in unheated premises of seasonal residence (country houses, summer cottages)
- do not burn
- are colorfast, do not fade in the sun
- change shape under the influence of a jet of hot air (building hair dryer) or hot water
Decorative moldings
Cast overhead strips are distinguished by the type of finish: for internal or external corners.
Products are produced with shelves of the same or different widths.
On protruding corners, in places of constant movement (hallways, kitchens, bathrooms), plastic corners for wallpaper with large sides (5 cm) are used.
Arches and curved surfaces with corners, with different sides of the shelves. Different side sizes allow you to keep the required mounting position of the element on the surface.
The length of the finished product ranges from 2.7 to 3 meters. The plastic is cut to the desired size with a hacksaw for metal, curly construction scissors or a knife. Profile cuts, for the design of joints along the perimeter of the slopes of doors and windows, are made using a miter box.
To fix the corners, use:
- liquid Nails
- self-tapping screws
- small (glazing) nails without heads
- acrylic sealant
- colorless silicone sealant
It is important to remember: compounds that are intended for metal and glass destroy the structure of plastic! Before buying glue, you need to read the instructions and pay attention to the area of application indicated by the manufacturer.
The glue is applied with a pistol. A continuous, wavy strip is applied closer to the center of the shelves. The location of the strip will help to avoid squeezing the glue onto the wallpaper when planting in place. Excess composition is carefully removed from the surface of the walls with a damp cloth.
You need to glue the corners carefully. Removing and re-sticking the plastic will result in deterioration.
The installed corners are fixed in place with construction tape to ensure adhesion to the surface. The adhesive tape supports the plastic for 24 hours, then it is carefully removed.
The finished patch will hide the unevenness of the joint, protect the surface from mechanical stress, and give the room a neat, well-groomed look.
Reinforcement and decoration of corners
Plastic corners for wallpaper for putty reinforce and align the joints of drywall sheets. The corners made in a similar way are treated with a finishing layer of putty and sanded. The formed joint is painted, plastered with decorative compounds, ennobled with stone, tiles or pasted over.
Sharp or unfolded corners require the use of corners with a universal reversal of the shelves around the axis.
Arched products are designed to be folded.
Cut segments allow you to create a smooth shape that follows the specified opening line.
To align the angle formed by two sheets of drywall, begin with an assessment of evenness.
A level is applied to each side of the slope and the heaped ones are marked. If the joint has significant deviations, then a starting layer of putty is applied to the grooves and grooves as beacons.
The perforated corner is applied to the installation site and slightly pressed into the applied solution. Excess mortar is removed with a spatula. The verticality (horizontal) of the installation of the corner is checked with a level. Correct the position of the plastic by gentle pressure.
After setting the solution and fixing the perforated corner, proceed to the finishing putty. Finish work on the formation of corners by grinding the surface.
In the process, they try to give the joint a smoothed shape, which greatly simplifies further finishing work.
Perforated corners give strength to protruding corners, and facilitate strict lines, curves and arches.
Color of decorative PVC corners
The color of finishing materials for the structural elements of the room should be combined with the color scheme and style of the space. Tone and texture help to unite the composition of the interior. A smooth transition of color does not split the space, and contrasting means visual division into zones according to purpose.
The door slopes are framed with corners to match the filling of the doorway. Plastic corner for wallpaper (colored) can repeat the color of the wallpaper, the texture of the flooring or ceiling plinth. The corners for framing window slopes are chosen taking into account the color of the glass unit.
The advantage of plastic corners is that the laminated film has the ability to reproduce various colors and textures (wood, metal, fabric).
Additional possibilities of using plastic wallpaper corners:
- protection of polyurethane foam around the perimeter of window and door openings from the street side
- use in the manufacture of furniture (built-in, including)
- finishing the corners of the kitchen backsplash from ceramic tiles
- installation in places of internal and external connections, when sheathing with plastic panels
- drapery of joints, when sheathing external walls with siding
Lightweight, durable plastic corners are indispensable for work that completes the decoration of the room. The color palette provided by the manufacturer of plastic corners allows you to choose the desired tone of products. The overhead molding decorates, zones, protects, increases the service life of the joints without additional efforts.
The built-in structure, with additional fastening properties (adhesive base and serpyanka tape), facilitates the task of decorating slopes, difficult corners, and arches. Experienced and novice builders willingly use plastic corners, improving quality and reducing time-consuming work.
How to glue the corner is shown in the video:
Empty corners are common in most apartments. It is also common practice to place large pieces of furniture in a corner, although a more suitable spot can be found for it if desired.
With such a disdainful attitude to the arrangement of the corner space, the mass of the usable area disappears. How to fill in the corners to make the apartment more practical and comfortable?
1. Reverse angles
Raised corners can also be used rationally. For example, equip them with unusual shelves. Such furniture is ideal for apartments with open plan or studio type.
2. Spacious wardrobe
A corner wardrobe is a real lifesaver for those who do not know how to fill the empty space in the bedroom or living room. Modern storage systems make it possible to make good use of every square centimeter. As a result, the corner cabinet is in no way inferior to the usual linear one in terms of spaciousness, or even surpasses it in this characteristic.
3. Functional mini-shelves
Even the smallest corner can be useful. This will help laconic corner shelves that fit perfectly into any interior - from the hallway to the living room.
4. Children's joy
In small apartments, it can be problematic to equip a full-fledged play area for children. Moreover, children strive for solitude so that adults do not distract them from an exciting game. A canopy in the corner will help to equip the play area. Another plus is that by closing the curtain, in a moment it will be possible to hide the scattered toys from the guests who suddenly arrived.
5. The corner hidden behind the screen
A screen is an item that will make any interior more sophisticated and elegant. If the area of the room allows, then the screen can be placed at a certain distance from the corner. So the screen will become a way of dividing the room, and a certain functional area is located behind it, if necessary. In a small room, the screen is placed close to the wall, acting as a decor.
6. Working with pleasure
Working from home requires complete concentration. A computer corner table will accommodate all the necessary equipment and documents. In addition, this position of the table will allow you not to be distracted by interfering external factors.
7. Practical hallway hanger
A standard hallway is a miniature room where every centimeter of space is important. Corner hanger allows you to conveniently place outerwear, umbrellas and bags.
8. Sleek console
A console table is still an unusual piece of furniture for most. But it is he who, due to its compact size, will ideally fit into any corner. Depending on the size, the console table can be used either as a work table or as a decorative one.
9. A secluded reading area
The more places in the apartment where you can retire, the more comfortable it seems. A comfortable chair, small table or bedside table is all that is needed to arrange a comfortable reading space. But do not forget about careful lighting of this area.
10. A special corner for a personal art object
It is not at all necessary to place a real art object in the corner. It will be replaced by any unusual object - from an original vase to a mirror in a carved frame. The main thing is to choose a suitable environment for him in order to create a holistic decorative composition. For example, a miniature bedside table and a table lamp shade.
11. Let there be light
Multi-level lighting will never be superfluous. A floor lamp in the corner will isolate the reception area, making it more comfortable.
12. The best corner for guests
The guest area will replace a full-fledged living room if the size of the apartment does not provide for a separate room for friendly gatherings. Depending on the size of the room, either a couch or several armchairs can be placed in the guest area. An obligatory element is a compact coffee table, which will become the center of the guest area.
13. Corner gallery
Empty walls are a clear sign that the interior has been decorated without the participation of professionals. But the situation can be corrected by decorating adjacent walls in an original way. Just hang a lot of pictures or photos in the corner. You can buy ready-made corner frames of the original form.
A coffee table in the corner.
If there is large furniture near adjacent walls, then the angle between them remains free. Place a small coffee table with a lamp in it. Unusual visual impact is guaranteed.
Papered and plastered outer corners need protection. Wallpaper from frequent contact is overwritten, the putty is destroyed. You can solve the problem with decorative corners. The corners to protect the corners of the walls can be of different materials.
Corners for protecting wall corners: selection options
This technique of decorating the corners of the walls - protective corners - not everyone likes, but there are no special alternatives. In any case, on the walls covered with wallpaper, the corner is still better than sticking out and torn canvases.
There is only one solution to the integrity of the wallpaper without the use of decorative corners - to make not an acute angle of the slope, but a rounded one. In this case, there will be no problem with its finishing. You can simply wrap the wallpaper canvas without cutting it. But you need to bring out the corner perfectly, otherwise you will have to cut it again, which means that the question of protecting the wallpaper joint on the corner will again arise.
It is important to choose the right decorative corner so that it does not look alien. There are special techniques for this.
It is necessary to choose corners to protect the corners of the walls based on the general design of the room. There are several standard solutions:
In general, choosing corners to protect the corners of the walls should be tied to the design of the room. This can be done after the furniture and textiles are placed. In this case, it is easier to imagine the end result. Because the picture in our head can be very different from reality.
If you can't find an acceptable color in any way, and you need to protect the corners in the apartment, pay attention to the transparent plastic corners. They are of different types - rigid, flexible, with different wall thicknesses.
Types of protective corners: from what materials
According to the area of application, the corners are for external (outdoors) and internal use. For now, let's talk about how to protect corners in an apartment and a house - indoors. Let's start with the materials. The corners to protect the corners of the walls can be:
The most popular are plastic corners to protect the corners of the walls. Do not think that such protection looks pathetic. In any case, no worse than frayed corners. It's just that the plastic is different in appearance - polished, with a metallized effect, with a satin (matte) surface, with a different relief. It is clear that in order to find something specific or special, you will have to run around hardware stores and markets. But there are many types of design. If the corners to protect the corners of the walls are selected correctly, they organically fit into the design, absolutely not attracting attention. At the same time, the joints are protected and decorated very reliably.
Shapes and sizes
The finished corners usually have an angle of 90 °. The angle itself is not always sharp, there are options with a rounded one. By type, the corners for protecting the corners of the walls are divided into:
- tough
- external;
- internal;
- flexible (plastic, rubber)
- universal.
Questions can only be universal. These are two strips of plastic or MDF connected by a thin strip of flexible material of the same color. Thanks to this connection, you can make an obtuse or acute angle, internal or external - without much difference. But in terms of protection reliability, it is inferior to rigid ones - after all, the flexible part is quite thin.
It is also worth knowing that the corners can be with shelves of the same and different widths. More often they are found with the same, but it is quite possible to find those in which one is wider, the other is narrower.
The shelf width differs from manufacturer to manufacturer. Plastic, for example, can have shelves from 10 mm to 50 mm. MDF corners are minimally made with a shelf width of 20 mm, metal corners - from 10 mm, but the maximum shelf length is 90 mm (aluminum). So there is plenty to choose from.
What to mount
The choice of the method of attaching the corners to protect the corners of the walls depends on the material of the corner, on what surface they will be attached to. The most commonly used glue. Moreover, the leaders are “liquid nails”. This is a universal compound, but check that the specific brand can adhere the materials you need before buying.
You can put a corner on the glue if it is even, without big flaws. If there are pits / depressions, it is unlikely that you will glue it. In this case, silicone can be used. If you glue the white corners, you can use white silicone. It is better to take transparent under the colored ones. It is not always desirable to use acidic. Although cheaper, it can damage metals or paint.
In both cases, the wall and corner must be clean and dry. The composition is applied to the corner, it is pressed against the corner, fixed with strips of masking tape. We grab it after 40-60 cm. If everything is even, it is possible after 60 cm, if it is necessary to repeat the shape, after 40 cm or even more often.
Leave in this state until the glue dries or the silicone hardens. See the package for the exact time. The masking tape can then be removed. It differs from ordinary adhesive tape in that it peels off even from paper wallpaper without damaging the surface. But to be sure, try sticking and peeling in an inconspicuous place.
Foam rubber corner - L-shaped and universal on a self-adhesive base
There is another option for how you can glue the corners on a wall with wallpaper, painting. You can use double-sided tape. Glue it first to the corner, then, after removing the protective coating, press it to the corner. There are corners to which the tape is already glued. Certain types of foam rubber or plastic (usually flexible or versatile).
Arch finishing
Arch design is often a problem. In general, there are not many outside corners in the apartment, but they are required on the arch. And in the aisle, they very often hurt. Either with furniture, then with another load, or just a resident who did not fit into the opening. And if there are no questions with the direct part, then the rounded part can be a problem.
In general, universal corners can be used for the arch. They are flexible, which is very convenient. There are flexible, non-universal ones - plastic, made of a special polymer of increased elasticity.
But in general, corners with different widths of shelves are used to decorate arches. They are even called arched. They have one shelf 10 mm (outer), the second - inner - 30 mm and more. They bend easily. Do not twist it into a donut, but it is not difficult to get any curvature of an arc. It will only be necessary to use a secure fixation while the glue dries.
If you want to bend an ordinary corner, you can do this by heating the plastic. For this job you need a building hair dryer. Regular - for hair - will not work, since its temperature is too low. We also need a template according to which we will bend the plastic corner. Take a piece of fiberboard, screw in self-tapping screws or hammer in nails, forming the profile you need.
So you can arrange the corners of the arch with protective corners.
Bending starts from the middle. Warm up the area by constantly pressing on the middle, and with a hairdryer moving from the center to the edges. So it is necessary to bring the corner to the desired curvature and leave it in this position to cool. So that it does not straighten, holes are made for the second row in parallel with a number of self-tapping screws. The distance between the rows is equal to the width of the corner shelf. After the plastic is bent, insert and slightly tighten the screws. After the plastic has cooled down, remove them.
How to cut finishing corners
Almost always, the corners have to be cut to protect the corners of the walls. They are sold in slats from 2 to 3 meters long. The cutting tool is selected depending on the type of material. For wood and metal, thick plastic, you will need a hacksaw, but the blade is different - for wood, and with a small tooth for metal or thick-walled plastic.
Thin plastic can be cut with a construction or office knife, sharp scissors. If you want to cut perpendicularly, it is easier to use scissors. We cut them to the corner on both sides, bend the corner, cut the remaining millimeters with a clerical knife. If there are flaws, they can be easily corrected with the same knife or sandpaper with a very fine grain (polishing).
If the plastic corner needs to be cut along the fold, we cut it along the inner corner with a clerical knife. Cutting through to the full thickness does not make sense. You just need to leave a noticeable strip. Then we fold back the piece to be removed. It comes off at the cut. Remove irregularities with a knife or sandpaper.
When building a house, the decoration of the outer walls plays an important role. It not only provides visual appeal, but also protects the house from the influence of bad weather and the environment, thus significantly increasing the service life. In this article, we will consider the options for exterior decoration of walls and corners of the house, as well as analyze the option of decorative facing the corners of the building from the outside.
general information
Before proceeding with the processing of the outer walls of the house, you will need to first install windows and doors, if the building was just built. If you plan to finish a wooden house from the outside, then it is necessary that it shrink. Also keep in mind that wall cladding should be carried out after the wood is completely dry.
You can perform work at almost any time of the year, so there shouldn't be any complications with this. The choice of covering often depends on the material from which the building was constructed. Sometimes simple plastering or painting is enough, and in other cases additional wall insulation will be required.
Also keep in mind that some types of finishes can significantly increase the pressure on the foundation, so make sure the foundation of the building is solid before using stone or brick.
Types of external wall cladding
Nowadays, there are a fairly large number of surface treatment methods. Most often, the following are used for external walls:
- wall cladding with natural stone;
- brick covering;
- artificial stone;
- sheathing using siding or lining;
- applying plaster to the wall.
Let's take a closer look at each option.
A natural stone
The use of stone for the exterior walls will give the house an austere look. Such processing of the outer walls demonstrates the success and prosperity of the owners of the house. The advantages of stone cladding include:
- the strength of the processed facade;
- long service life of the coating;
- attractive appearance.
Also keep in mind that due to its properties, the stone will do an excellent job of protecting the surface from the effects of moisture from the outside. The stone can be used both for complete decoration and for partial decoration, for example, for the basement or corners of a building. There are two types of building stone to choose from: processed or untreated. The latter option looks more attractive, but it is a little more difficult to work with it.
Quite often, it is granite that is used for external walls; this option also has a decorative effect. Marble is also used, which has a great variety of shades. The price is really quite high, so not everyone can afford this luxury.
Another disadvantage is the large weight of natural building materials. However, there is a stone called travertine, it weighs much less, while it has good sound and thermal insulation effects. The method of finishing with travertine is greatly simplified, and the price does not bite so much.
Keep in mind that decorating the walls with a stone outside is in any case a rather expensive and difficult task that will require special skills and knowledge from the worker. Therefore, we recommend that you pay careful attention to other types of cladding.
Fake diamond
Choosing an artificial material is a good option for treating exterior walls. It doesn't even require any prior preparation. This stone has almost the same performance as the real material.
This method of finishing allows you to give the building a pleasant appearance and at the same time requires only minimal costs. Keep in mind that the texture of such a stone can be both smooth and embossed, so the choice is yours. There is also a fairly large variation in shades that will provide a unique design for the home.
Siding
Siding in our time has gained quite high popularity, due to good indicators of price and quality. This coating is installed with an overlap - this must be taken into account when finishing the wall. Most of this material is made from vinyl, but there are options in metal or even foam. This treatment of exterior walls and corners has the following advantages:
Installation of siding must be done on the frame of the house. Quite often, insulation is used during installation. The only drawback of this finishing option is the poor combination of siding with other decor options. Please note that installation must be done with extreme care to avoid damage to the material.
Clapboard decoration
The lining is made from natural ecological components, so it will not cause any harm to humans. It is made in the form of a processed wooden board. The lining will provide the house with an attractive appearance, besides, it will visually align the outer wall and provide good sound insulation.
However, such a finish for external walls and corners has almost all the disadvantages of wood, so additional processing with special solutions will be required. Lining is most often made from the following types of wood: oak, pine, spruce, birch, walnut and linden.
Using bricks
Brick will provide good protection for the exterior walls and corners of the house from environmental influences. This processing method can be considered one of the most durable options. In addition, the brick will provide a sophisticated appearance and require little maintenance. The installation method is also quite simple.
Thanks to the ability to vary the size and shape of the brick, you can create an unusual design. Using fired brick will also produce impressive results. The main disadvantages of such a finish are the heavy weight and high cost of the material.
Plastering
Plaster is mainly used when it is necessary to create a decorative effect of the outer wall and provide protection from fire. Decorative solutions are of different types; silicate mixtures are especially popular.
Also, acrylic solutions are often used, which have improved characteristics. Decorative plaster for exterior walls and corners is available in many varieties, so the choice will not be easy.
This finish will protect the building from moisture and fire. Significant drawbacks can be considered a low service life, which will not exceed ten years, as well as the need for additional leveling of the wall, and, especially the corners, which will require time and effort.
Combined finish
There are two ways to combine:
The latter combination method has become much more common. These methods will provide an interesting interior for the building and endow it with the properties of each type of cladding.
Finishing the outside corners of the house
Corner treatments are often made from the same materials as the wall. It is also the occasion when you want to create a decorative effect. For finishing corners used: brick, stone, plaster, foam, tiles and other materials. Remember that working with corners is quite hard work and sometimes it can be difficult to get by without the help of professionals.
For finishing the outer corners of the building, special foam panels have recently begun to be used, which provide an unusual decorative effect. The same treatment is also suitable for wooden houses. With such a facing, the building acquires the effect of antiquity and becomes like a castle. We recommend watching the following video to see how styrofoam corners are handled in practice:
Summing up
As you can see, decorating the walls of a house is extremely important, which provides a decorative effect and allows you to achieve additional protection. There are many options, and it will be quite difficult to choose one of them. Each of them has its own advantages and disadvantages, which were discussed in detail in the article. If you wish, you can choose a combination option, however, it must be borne in mind that it will be quite difficult to carry out the finishing, since special skills and knowledge will be required. The choice of exterior wall cladding will only depend on you and your personal tastes and preferences. We recommend watching a special video to learn more about the methods of finishing the exterior walls of the house and their corners.