How to use furniture wax. Furniture Wax

Wooden furniture special. She creates an atmosphere of comfort, reliability, warmth. But over time, cracks appear on her surface, scratches, which, of course, grieves the owners enough of the furniture. It is not worth the upset, because today there are a lot of money that can eliminate damage and update appearance Furniture. At the same time you can use both professional furniture wax and natural foods.

What is furniture wax?

Furniture wax is a means for treating and restoring furniture from a tree. Interestingly, he was used by another wood masters in ancient times. Due to water-repellent properties, the ability to completely penetrate into the structure of the tree wax remains incredibly popular and now. It is convenient to use the wax for furniture very simply both to eliminate chipping and smoothing scratches, dents.

Advantages of applying furniture wax to no less popular polyrolles are obvious:

• the velvety effect on the furniture is maintained;
• tree color becomes more saturated, deep;
• you can select the desired tone of the material;
• after processing, the furniture acquires an initial look.

There are two types of product:

• soft;
• solid.

How and when to use soft wax?

Soft wax is ready for repair of furniture and does not need to be pretended:

• open the jar with the means and a plastic spatula, we apply it to a damaged area;
• surplus wax carefully remove everything with the same spatula;
• after 15-20 minutes, the treated surface should be polished, moving in the direction of wood fibers.

For the final polishing of the surface, a dense felt or cotton fabric is perfectly suitable, a napkin.

Optimally use soft wax, if necessary:

• update the surface of the furniture;
• remove minor scratches, shallow cracks;
• reduce the degree of manifestation of dents or chip.

You can handle with soft wax not only wooden surfaces, but also laminated. At the same time, experts advise him exclusively for internal work in view of greater efficiency.

Learn how to withdraw fresh and soothed with clothes.

Instructions for the use of solid wax

The solid wax for furniture is perfectly coping with surface damage, and also restores and restores wooden coatings With serious flaws. Optimally use it for outdoor work.

The difference between mild and solid wax in their structure, which determines different technologies Application funds. Solid wax has a dense, thick consistency. To properly and qualitatively apply it to the area of \u200b\u200bdamage, you will need a soldering iron. With it, it is necessary to melt the material and only after that apply to the surface. Time setting the means ranges from a few seconds to a minute. After that, the excess material is removed with a rubber or plastic spatula, and the finished coating is polished.

Tip: To get not a matte, and a glossy surface, repeat the procedure an hour later when the first layer will fasten well.

Note that without availability necessary experience Credit with the application of solid wax is quite difficult. Practice on a small piece of wood or immediately contact professionals for help.

How to prepare a surface for processing?

Now you know how to use solid and soft waxes for furniture. The application will be better, if the surface is prepared in advance.

So, to achieve maximum effect, the pores of the tree must be open. So the wax will evenly penetrate into the structure of the tree and lay down with a smooth layer. That's why lacked furniture It is necessary to clean from varnish before wing. We will tell you how to optimize this procedure:

• we proceed with a lacquered surface with a solvent until all varnish are removed - most likely, you will need to make several approaches;
• the next step is to use emery paperwhich it is necessary to process the surface of the tree to the perfectly smooth state;
• at the end, we clean the surface with a soft tissue and you can move to the applying of wax.

ATTENTION: It is critical to produce all work in the direction of the tree fibers in order not to damage its structure.

Preparing wax with your own hands

If you wish, you can prepare furniture wax yourself. The recipe is simple enough, but it is important to adhere to the manufacturing technology.

The wax for the repair of furniture cooked with their own hands includes only two ingredients:

• beeswax;
• turpentine.

IMPORTANT: If you plan to cover bright hues Furniture, use clarified beeswax.

Adhere to this sequence of actions:

• in glass vessel pour one portion of turpentine;
• two portions bee wax finely ruby \u200b\u200band also add to the vessel;
• we place the glass container in the pan and put together with the contents on the water bath;
• after the beeswax is completely melted, turn off the fire and remove the container;
• mix all the ingredients and, if the product is too liquid, add some more bee wax, achieving the necessary consistency;
• store ready product In a tightly closed container.

Important: Skipidar easily flammable, so it's not worth it for a long time on fire.

How to understand that the wax turned out? Wait until its complete cooling and appreciate the degree of degree. If necessary, place a remedy for a water bath and adjust the thickness by adding one or another ingredient.

How can I replace furniture wax?

As an alternative to wax for repair wooden furniture You can use the so-called folk remedies. We will list the most effective and affordable practically to each:

• core walnut - I spend the scratch or crack a couple of minutes, then go through the treated surface soft clothand then open it with varnish;
• vegetable oil and lemon juice - connecting two components in equal proportions, apply the composition on a damaged area and rub, without applying special physical efforts;
• tea welding - firmly brewing tea and apply the product to the place of the chick, leaving on it until the desired effect is obtained;
• coffee - grumbling to small powder Coffee beans are brewed to a thick casher, and then applied the means exclusively on scratches.

notice, that folk recipes Suitable for elimination small damage. If necessary, serious restoration works are likely to be ineffective, and will have to use the finished industrial means.

As begress, you neither treat furniture, with time there are inevitably a variety of external defects are inevitably appear - scratches, chips, cracks and so on. But you should not immediately run to the store for new products. You can simply use wax for furniture repair. It will return to the former beauty of the tables, chairs and other interior items. But how to choose it? Not everyone knows about it.

Soft type

The main purpose of this type of wax is the sealing of multiple small scratches. It is also used to mask cracks, chips, dents and other things. In addition, with it, you can easily hide the holes from the screws. As a consistency, soft wax resembles plasticine, so it is very easy for them to use it even for an unprepared person. To work, you will need such things and tools like:

• putty knife;
• stationery knife;
• roying from felt.

Soft wax you just need to laugh into a damaged area. Then it is necessary to align it with a spatula and remove excess with a knife, and then smooth and polish with a cloth. As can be seen, use the means is very simple. If there are pictures on the surface of the furniture, you can upgrade them with markers.

Solid type

This type of wax is used for more serious restoration work. If the chips and cracks are wide and deep, you should choose it. However, it is necessary to take into account that the use of its more laborious. The fact is that the solid wax must be pre-melted, for which it will be necessary to use a lighter or gas burner.. It is applied to the place of defect in a slightly cooled form for better clutch. Surplus are removed by the stationery knife.

The disadvantages of solid wax are subject to less rich flower paletteWhy to choose the appropriate shade may be difficult. In addition, it is much more expensive than mild. But due to its consistency, it provides much the protection of repaired furniture.

Thus, if defects on interior items are not very serious, it is better to use soft wax. Otherwise, it is worth choosing solid. You can buy furniture wax on our website.

In the process of moving, repair or long-term operation of wooden furniture items on their surface, scratches, chips and cracks can be formed. To date, there are several types of specialized drugs that will help how to remove scratches from furniture, and update their appearance. It can be professional means, for example, furniture wax or barcode, and natural products. Selecting the optimal tool, you need to evaluate the quality and color of the subject, size and type of damage.

Types of furniture wax and the rules for its use

Wax is universal tool To restore wooden furniture. It can be applied on untreated, laminated and patent surface. There are two types of product that differ in composition and physical properties:

• Soft. You can use to eliminate traces of small shallow scratches. To do this, we simply distribute the product on the problem area and eliminate the excess means in a quarter of an hour. Then you need to polish the surface with a cotton cloth. If damage is essential, then the wax is applied with a spatula or knife, withstand the remedy for a little longer.

• Solid. Professional composition is not so easy to handle, but gives a more attractive effect. First, the furniture wax must be melted, then apply to damage and around them. A minute later, the product will freeze, then you need to polish the tree, removing all the processing environments. Qualitative performance Manipulation requires a certain skill, but the result is worth it.

In addition, there is still a barcode for processing wooden furniture. it liquidTo be carefully stolen before use and in several layers, apply to the zone with cracks with scratches.

Tip: It is best to act slowly and sequentially, the surface of the surface after drying each layer. Only in this case will be able to achieve the desired result and the recovery carried out will not even leave any traces.

It is worth considering that furniture wax is impossible to replace with ordinary or cosmetic paraffin, even if you paint the drug in the appropriate color. Its texture is noticeably different from such analogues, making the composition does not wash and does not fall out of cracks.

How else can you remove scratches from the surface of wooden furniture?

If the profile wax for some reason is unavailable, for the restoration of the wooden surface, you can do with undergraduate means, which often advocates the most conventional foods:

• Walnuts. We split the kernel and begin to rub the scene place of the chip or scratch, without applying physical effort. Manipulation must be continued for a few minutes, after which we wipe the zone with a soft napkin, removing excess oil and pulp. To secure the effect, the area is recommended to seal with a special cloth and coat with a transparent varnish.
• Mayonnaise. White sauce you need to fill the cracks, removing excess product from the surface. Then you just need to wait until the oil is absorbed into the fibers of the wood, provoking her swelling. Then the crack closes yourself. After a couple of days, we remove the remnants of the mayonnaise, which will come to the surface.
• Lemon juice with vegetable oil.We mix the two components taken in equal proportions, we apply the resulting composition on a soft napkin and rub it into a problem zone. This method will help get rid of only very small scratchesBut it will not leave any traces.
• Tea welding. It should be fresh, cool brewed product. Most often it is used to mask chipping. The technique is quite troublesome and risky, because You can not guess with the fortress of welding and leave on the surface of the furniture dark spot. We simply apply the product to the surface and do not wash off. It is better to paint the tree in stages, stopping after achieving the desired color.
• Coffee. Brew a thick cashem from ground to the condition of the fine powder of coffee beans and warm water. We only apply it to scratches. To affect whole areas can not. Excess weight remove a napkin.

In addition to the products, the use of the following means is allowed:

• Machine oil or iodine. We choose one of these funds and apply on chips and scratches. After drying the product, it is definitely shoffing the processed place.
• Shoe polish. It is only necessary to choose a suitable shade and apply the composition on direct scratches. I do not need to wash or count.
• Drawing accessories. Simple I. effective option Recovery wooden products. Most often, for this purpose, wax crayons are used, but in the extreme case markers will rise.

To those who do not like to do express means, self-made mastic can be useful. For her preparation, it is necessary to melt on a slow heat of 40 g of wax. In the melted composition, we pour 30 g of a chipidar, mix and a minute add a tablespoon of alcohol in a minute. We wash the mass and remove from the fire. We wait until the product cools, after which woolen clothMixed in gasoline, distribute the composition on the problem area and rub before the appearance of the characteristic shine.

Despite the simplicity of these approaches, they differ in high efficiency and allow you to restore the tree no worse than professional means.

Exists a large number of funds that masters are used when processing wood. Furniture wax remains the leader in the restoration of the tree. He emphasizes natural beauty Tree and eliminates mechanical flaws on the surface of the material. The restoration also actively applies chalk with wax, which is designed specifically for furniture. For proper selection Tint The appearance of the design acquires a saturated color.

Unlike other means, the mixture does not fall on the surface of the wood, and penetrates its internal structure. The texture of the tree does not deteriorate, and the heat is saved for a long time. In addition, wax has the following advantages:

1. On the touch surface acquires natural velvetiness, there is no glossy polishing.
2. Furniture made of natural treewill play new and expressive paints.
3. The range is represented by B. different options Toning: Any furniture will harmoniously fit into the interior.
4. By external composition, the wax is a thick dense mass, which completely fills the chips, cracks, scratches and other mechanical flaws.

Pluses much more than minuses. The main disadvantages include a low protective level, compared with the same varnish. It is also impossible to completely disguise traces and stains, which are formed as a result of the harmful effects of moisture and sun rays.

Varieties of material

There are many types of materials based on wax. Modern market offers the buyer such varieties:

All varieties include the following natural components:

• Essential oils of coniferous plants;
• Wood resin;
• Olife;
• Beeswax;
• Olive, linseed oil.

It is convenient to use the wax pencil for furniture - from scratches. It is represented by a wide color line and has water repellent properties. After its impact, the furniture looks like a new one. Apply on lacquered and laminated surfaces. Use waxing for furniture is very simple and convenient.

Terms of application

Short rules will help the lover correctly use furniture wax and without mistakes to perform the restoration work:

Independent manufacture

Recipe for creating simple. Many specialists prepare the wax for furniture with their own hands. The solution is manufactured in a water bath. To do this, it will be necessary to connect the beeswax with a turpentine. The first component must be thoroughly chopped with a knife, then placed in a container with turpentine. It should be two times less than beeswax. In the process of cooking, the mixture must completely melt. To give births to the finished solution, the remaining wax is added. The main security rule is a careful circulation with a turbidar. It can easily ignite, so it is impossible to keep it on fire for a long time.

As soon as the finished mixture will cool, evaluate the degree of degree. To make a solution more liquid, you need to again place the container on fire and add turbid. The resulting wax is stored in a closed packaging.

During the period of relocation or long-term operation of furniture, chips, cracks or scratches may appear. Replacing the case elements will entail serious financial spending, and it is a pity or inappropriate to throw out furniture for a landfill. Wax comes to the rescue, which easily gives furniture the original appearance.

In order to learn how to use the furniture wax, you do not need to have extensive experience, it is enough to assimilate the main points of work. This will not allow the payable services of specialists.

It is very disappointing when the furniture is beautiful and beloved by the owners - it's cold or just darkens with time. Especially unpleasant such changes, if cabinets or other interior items are made of high quality and durable material - Natural wood.

But with any changes or violations of the surface, it is not necessary to hurry for help to specialists or, moreover, throwing out products, because with such troubles you can cope with my own, just buying and applying good furniture wax.

It should also be noted that the choice must be taken carefully and consider several types of these products in order to make the right purchase. In addition, it is important to learn in advance all the subtleties - how to prepare working areahow to use wax with direct application, as well as what is further care For restored furniture.

Types of wax.

As experts, two types of this product are widely used by specialists, this is solid or liquid type of raw materials. They are applied in various situations and perform only their specific functions.

• Liquid product. Such furniture wax is often used in everyday life for correction of minor damage to surfaces - small chips, dents or scratches. It is easy to use and easily accessible, sold in almost all relevant outlets. However, it should be known that such goods are unsuitable for recovery work Furniture, if it is subsequently subjected to serious chemical / physical or thermal loads (extract, other).
• Solid product. This furniture wax has certain advantages - if you compare with liquid counterparts, because it is even designed to correct the same types of damage, but it is able to withstand of different kind influences - high temperatures, mechanical effects, etc.

Both first, and the second type of goods have "in arsenal" several colors and shades capable of not only restore, but also refresh (clarify) Furnished with the years.

Method of applying wax

Each attentive mistress (owner) before using the wax of any consistency, should carefully examine the guide or the attached instruction.

• For sealing single damage to a liquid type of raw materials, you should use a special brush and, if necessary, polish the surface with a soft, not leaving the fibers of matter.
• With more serious restoration work - large chips, deep dents, it is better to pick a solid wax. It should be applied in stages - layers, cutting off the pieces of wax and the tampering one on another. Then it is also important to smooth the surface.
• If a solid coating is planned wood surfaceIt is important to know how to use the wax is most correct to achieve a resistant effect. It is best to use, of course, a solid species of the product, pre-molding it (wax, water bath). The method of applying is simple - brush or a special lobby roller with subsequent polishing of the working area.

Finally, it is important to recall that the color of this product is very carefully picking, otherwise areas subject to recovery will be noticeable.