We bring to your attention a typical example of a job description of a locksmith for the repair of technological installations of the 4th category, a sample of 2019. A person with education or special training and work experience can be appointed to this position. Do not forget that each manual of a locksmith for the repair of technological installations of the 4th category is issued on hand against a receipt.
Typical information on the knowledge that a locksmith for the repair of technological installations of the 4th category should have is presented on. About duties, rights and responsibilities.
This material is included in the huge library of our site, which is updated daily.
1. General Provisions
1. A mechanic for the repair of technological installations of the 4th category belongs to the category of workers.
2. A mechanic for the repair of technological installations of the 4th category is a person who has ______ (education, special training) and work experience in this position ________ years.
3. A mechanic for the repair of technological installations of the 4th category is accepted for the position and dismissed from the position ________ (by whom, position)
4. A locksmith for the repair of technological installations of the 4th category should know:
a) special (professional) knowledge by position:
- purpose, arrangement of complex equipment;
- technical conditions for repair, testing, adjustment and delivery of repaired equipment;
- the basics of scheduled preventive maintenance;
- a system of tolerances and landings, qualities and roughness parameters;
- ways of marking and processing of simple various details;
- the device of lifting mechanisms and the rules for using them;
- the basics of rigging;
- rules for checking repaired and assembled units and devices.
- qualification requirements for this position of a lower category.
b) general knowledge of an employee of the organization:
- rules for labor protection, industrial sanitation and fire safety;
- rules for using personal protective equipment;
- requirements for the quality of work (services) performed, for the rational organization of work in the workplace;
- assortment and marking of materials used, consumption rates of fuels and lubricants;
- rules for the movement and storage of goods;
- types of marriage and ways to prevent and eliminate it;
5. In his activity, a mechanic for the repair of technological installations of the 4th category is guided by:
- the legislation of the Russian Federation,
- Charter (statute) of the organization,
- this job description,
- The rules of the internal labor regulations of the organization.
6. A mechanic for the repair of technological installations of the 4th category reports directly to: ________ (position)
2. Responsibilities of a mechanic for the repair of technological installations of the 4th grade
Locksmith for the repair of technological installations of the 4th category:
a) Special (professional) job responsibilities:
1. Dismantling, repair, assembly of complex installations, machines, apparatus, pipelines and fittings using lifting mechanisms.
2. Locksmith processing of parts according to 7 - 10 qualifications (2 - 3 classes of accuracy).
3. Removal and installation of working and control safety valves from the tank equipment.
4. Testing, adjustment and delivery of equipment after repair.
5. Manufacturing of complex devices for the assembly and installation of repair equipment.
6. Drawing up defective repair lists.
7. Responsibilities of the officials for this position of the lower category (s).
Work examples:
1. Air coolers - disassembly of the gearbox.
2. Column-type devices - repair, assembly of internal devices, removal and installation of covers, heads.
3. Heat exchangers - assembly.
4. Granulators, crystallizers, mixers, filters - disassembly, repair, assembly.
5. Piston compressors - disassembly, repair and assembly of cylinders, crankshaft, crosshead assembly, valves, pistons.
6. Centrifugal compressors - disassembly of the rotor, repair of bearings and gear couplings.
7. Pumps are centrifugal, double-casing and multistage pumps with more than four impellers - disassembly.
8. Tubular furnaces - replacement of pipes, twins.
9. Reactors - replacement of the lantern, removal of heads, removal and installation of the pocket of the zone thermocouple, assembly of the seal assembly and couplings.
10. Reducers - repair, assembly, adjustment.
b) General job responsibilities of an employee of the organization:
- Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.
- Fulfillment of the orders of employees within the framework of the employment contract, by whom it was repaired in accordance with this instruction.
- Carrying out work on acceptance and delivery of a shift, cleaning and washing, disinfection of serviced equipment and communications, cleaning of the workplace, devices, tools, as well as keeping them in proper condition.
- Maintaining the established technical documentation.
3. The rights of a mechanic for the repair of technological installations of the 4th category
A locksmith for the repair of technological installations of the 4th category has the right:
1. Submit proposals to the management:
- to improve the work related to the obligations provided for by this instruction,
- on the encouragement of distinguished workers subordinate to him,
- on bringing to material and disciplinary responsibility of employees who have violated production and labor discipline.
2. To request from the structural divisions and employees of the organization the information necessary for him to perform his duties.
3. To get acquainted with the documents defining his rights and obligations in the position held, the criteria for assessing the quality of the performance of official duties.
4. To get acquainted with the draft decisions of the management concerning its activities.
5. Require the management to provide assistance, including the provision of organizational and technical conditions and the execution of the established documents necessary for the performance of official duties.
6. Other rights established by the current labor legislation.
4. Responsibility of a mechanic for the repair of technological installations of the 4th category
A locksmith for the repair of technological installations of the 4th category is responsible in the following cases:
1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage to the organization - within the limits established by the current legislation of the Russian Federation.
Job description of a locksmith for the repair of technological installations of the 4th category - a sample of 2019. Responsibilities of a mechanic for the repair of technological installations of the 4th category, the rights of a mechanic for the repair of technological installations of the 4th category, the responsibility of a mechanic for the repair of technological installations of the 4th category.
Information on the design, purpose, as well as the principle by which individual devices and assemblies, units and equipment intended for repair work operate. Under what conditions is it necessary to service technological installations. What are the main techniques should be followed in the implementation of plumbing activities. Have a general knowledge of welding and bonding work. What rules are used to test pipelines that differ in small diameters. A locksmith for the repair of technological installations must have the basic concepts of tolerances, landings, qualities, according to what principles the accuracy and frequency of processing are classified. Have an idea of everything that relates to devices, tools, as well as their purpose and rules of operation. According to what rules is the marking of pipes carried out. Rules that should be followed when to use oils, greases and detergents. Own basic drawing-related elements. Mandatory observance of production, job descriptions, as well as rules that relate to the internal labor schedule. Have basic knowledge of economics, economic state policy, features of the current stage of development, development prospects, what production plan the enterprise, workshop, team adheres to. What modern methods should be followed to organize your work and workplace. Know the necessary list of safety requirements, including industrial sanitation, as well as fire safety.
The scope of duties of a mechanic for the repair of technological installations of the third category includes:
Measures for disassembly, repair, assembly, as well as testing of everything related to simple assemblies and machine mechanisms, this applies to apparatus, pipelines and fittings. The aforementioned specialist must repair everything related to simple installations, units and machines, he must carry out repair work that is equivalent to an average and increased level of complexity. The repair activities of a mechanic for the repair of technological installations of the third category are supervised by a mechanic who has a higher qualification. Also, the duties include work on locksmith processing of parts, which is characterized by the accuracy of manufacturing parts of at least grade 4-5 (for 11-12 grades). Carrying out measures for flushing, cleaning and lubricating the installation elements. The specialist should be able to apply the markings, then the drilling of the hole on the flange follows. To be able to perform work on straightening, filing, and also cutting threads on a pipe. To be engaged in simple devices, namely, their manufacture, which are intended in order to assemble and mount the equipment being repaired.
The required amount of knowledge of a mechanic for the repair of technological installations of the third category:
Information on the design, purpose, as well as the principle by which individual devices and assemblies, units and equipment intended for repair work, including fittings, operate. Have accurate knowledge of pipe specifications, in addition to profile steel and fixing materials. To be proficient in welding, to know everything about the properties of materials intended for welding. According to which list of rules, installations and other equipment are operated. According to what principles and technologies the pipeline is being laid. Own a schematic process diagram, including a diagram that relates to the communications of the installation intended for maintenance. Know everything about tolerances, grades, landings and roughness parameters.
The scope of duties of a mechanic for the repair of technological installations of the fourth category includes:
Measures for disassembly, repair, assembly, as well as testing of everything related to complex installations, machines, pipelines, apparatus, fittings, when lifting mechanisms are used. The duties of a locksmith for the repair of technological installations of the fourth category include work on locksmith processing of parts, which is characterized by the accuracy of manufacturing parts of at least 2-3 classes (according to 7-10 grades). Carry out measures for the removal and installation of working and control safety valves from installations that are related to capacitive ones. Engage in testing, adjustment and commissioning of equipment for further operation after repair work has been carried out. To be engaged in the manufacture of complex devices for the assembly and installation of installations, which are intended for repair work. Engage in the preparation of defective lists for repair activities.
The required amount of knowledge of a mechanic for the repair of technological installations of the fourth category:
What is complex equipment intended for and how is it arranged. Know everything about the technical conditions for repair work, testing, adjustment, as well as the subsequent delivery of installations that have been repaired. Know everything about preventive maintenance. Know everything about tolerances, landings, qualities, as well as roughness parameters. Know in what ways the markup is applied, as well as how to correctly process parts that are considered uncomplicated. How to properly check components and devices that have been repaired.
The job responsibilities of such employees as a locksmith are very diverse. They depend on the specifics of the serviced equipment. However, in any case, the main goal of performing locksmith work remains to ensure uninterrupted operation and premature failure of subordinate mechanisms, machines, machine tools and other mechanisms.
Determination of the list of tasks performed by the locksmith and the level of his qualifications
Unambiguously answer the question of what is included in the duties of a plumbing specialist. It depends on many nuances. The key ones are the nature of the serviced equipment and the degree of qualification of the employee.
It is customary to distinguish it among locksmiths. Their assignment proceeds from lower to higher, where the first category means the presence of basic knowledge and skills, and the sixth - a high level of training and professionalism. An important role in determining the qualifications of a specialist is played by his work experience, since it is he who is one of the main sources of acquiring plumbing skills. Basic knowledge is acquired in the course of obtaining secondary specialized education.
According to the available categories, it is customary to differentiate the list of tasks performed by specialists. They are determined on the basis of a unified tariff and qualification reference book of jobs and professions. So, in the presence of the 1st qualification category, the locksmith, according to ECTS, is allowed to prepare equipment, select lubricating fluids, work with screws, bolts and other connections. A repairer of the 2nd category is allowed to dismantle simple components and assemblies, to repair and diagnose them. In accordance with the assigned qualification category in ECTS, a list of operations performed and requirements for a specialist is negotiated.
The main areas of plumbing are such as industrial equipment and technological installations, instrumentation and automation. It is also worth highlighting the systems serviced by the workers of this link. These include heating, plumbing and ventilation systems. Special attention should be paid to repairmen of mechanisms and equipment of ships, since their duties are related to the repair and debugging of complex mechanisms of steam and hydraulic machines.
Tasks and operations performed in the course of work activities for each repairer have their own specifics. But regardless of the direction of activity, the main task remains to ensure the trouble-free and efficient operation of the subordinate equipment.
Fitter functionality
Specialists of mechanical assembly works carry out assembly of units and assemblies, complex technological equipment.
Job responsibilities include carrying out the following operations:
- work on lapping, as well as scraping conjugated surfaces;
- fitting of parts and assemblies of machines and mechanisms;
- balancing of units and parts in a static and dynamic way;
- equipment troubleshooting and assembly errors correction.
Locksmith MSR usually works with industrial equipment of varying complexity. The degree of uniqueness of the equipment to which a specialist is allowed to perform work is determined by his qualification category.
Job responsibilities of instrumentation locksmith
This specialty involves the repair and maintenance of precision instrumentation and automation. To obtain the position of a mechanic-adjuster of a KPIA, it is enough to have a secondary specialized education and a medical examination for the possibility of performing official duties.
This includes the following works and operations:
- Carrying out works on timely repair and maintenance of instrumentation and automation in accordance with the assigned category and the functionality established by ECTS;
- ensuring the proper operation of alarm and blocking systems;
- prevention of premature failure of entrusted equipment;
- control over its correct operation.
Locksmith functionality for the repair of technological installations
Locksmith RTU must have a secondary specialized education. The list of knowledge and skills of specialists of this specification includes the basics of plumbing, design features of equipment, processed metals and the permissible loads on them.
The list of job responsibilities includes the following works and operations:
- repair and maintenance of units and assemblies, machines and mechanisms, fittings and pipelines;
- prevention of premature failure of this equipment;
- control over its correct operation;
- testing of machines and mechanisms.
The functionality of a locksmith for the maintenance of heating networks
Under the jurisdiction of specialists in this direction are pipelines and equipment for hot and cold water supply at the enterprise. The site of work is the place of passage of the heating main.
Heating network service locksmith must perform the following functions:
- operations for the maintenance and repair of heating networks, pipelines for hot and cold water supply;
- control of valves and pipelines;
- pressure control in the pipeline system;
- selection and implementation of a suitable operating mode of heating equipment in accordance with climatic conditions;
- prevention of premature wear of pipelines and heating systems, monitoring of their condition.
Responsibilities of an emergency repair locksmith
Locksmith AVR carries out repair work of plumbing and sewerage equipment. Is directly subordinate to the head of the unit. The qualification is awarded in accordance with ECTS and is confirmed annually.
The duties of an emergency repair locksmith include the following operations:
- elimination of blockages and cleaning of sewer pipes;
- installation and dismantling of water pipes; cutting them;
- heating water supply networks;
- makes emergency repairs of water supply and sewerage networks and much more.
Ventilation locksmith professional tasks
As with the rest of the directions of locksmithing, the task of the workers of this link is to debug and ensure the continuous operation of the subordinate equipment, namely ventilation systems.
Into the functional ventilation locksmith includes the following works:
- control over the condition of the ventilation systems of the enterprise;
- assembly and disassembly of relevant parts and ventilation equipment;
- ensuring timely repair of failed mechanisms;
- prevention of premature wear of ventilation systems and prevention of this.
Duties of a ship fitter
This specialization has qualification categories and the corresponding functionality, which is determined by ECTS. Marine fitter carries out operations for the installation and dismantling of equipment, work on centering and installation of units and assemblies, repair and maintenance operations. Also, the list of works performed includes:
- assembly and disassembly operations for marine diesel engines;
- their repair and maintenance;
- carrying out repair and preventive work to prevent breakdowns of electrical equipment and ferry machines;
- repair and debugging of individual parts and assemblies of hydro and steam machines.
For the most part, employees of this specialization are divided into teams that perform separate, predetermined operations. Moreover, each employee must be ready to move to another area of work within the framework of his professional qualifications.
Requirements for locksmith workers
There are qualifying ranks among. According to ECTS, they have their own functional tasks and requirements. Specialists in this field confirm the degree of their professionalism with the help of annual certification.
Locksmith specialists belong to the category of workers and report directly to the head of their unit or shop. In addition to direct job duties, the functionality of a locksmith includes the execution of direct instructions from the head of the department regarding production activities. Also, compliance with the norms and standards of labor organization established at the enterprise, compliance with technological and fire safety standards.
The availability of the required knowledge and skills is determined by the nature of the work performed and the qualification category. Skills must be sufficient to complete the assigned production tasks. If necessary, a specialist can perform repair and maintenance work on more complex equipment than is provided for by his discharge. Perhaps this is subject to supervision by a more qualified repairman.
Regardless of the focus of work, a locksmith can improve his professional qualifications. This will help ensure better performance and promote promotion to department head or mechanical engineer.
QUALIFICATION - 2 Tier
SHOULD BE ABLE TO:
Disassemble, repair, assemble and test simple units and mechanisms of machines, apparatus, pipelines, fittings. To carry out repairs of simple installations, units and machines, as well as repairs of medium complexity under the guidance of a mechanic of higher qualifications. To carry out locksmith processing of parts according to 12-14 grades (5-7 accuracy classes). Flush, clean and lubricate parts. Mark and drill holes on the flanges. Edit, filing and thread pipes. Make simple fixtures for the assembly and installation of repaired equipment. Handle tools and machinery with care, use materials and energy sparingly. Rationally organize the workplace. Comply with the requirements of labor safety, industrial sanitation, fire safety and internal regulations.
Locksmith for the repair of technological installations of the 2nd category MUST KNOW:
The device, purpose and principle of operation of individual devices and units, and repaired equipment. Operating conditions of the serviced equipment. Basic techniques of plumbing work. General rules for welding and soldering. Rules for testing pipelines of small diameters. Basic concepts about tolerances and landings, qualities, accuracy classes and processing cleanliness. Appointment and rules for the use of devices and tools. Methods for marking pipes. Rules for the use of oils, detergents and lubricants. Drafting elements. Production, job description and internal labor regulations. * Fundamentals of Economic Knowledge. The economic policy of the country and, especially the development at the present stage, the tasks for the coming years, the main indicators of the production plan of the enterprise, workshop, brigade. Modern methods of organizing work and workplace. Requirements for industrial and fire safety at work, industrial sanitation.
QUALIFICATION - 3 Tier
SHOULD BE ABLE TO:
To disassemble, repair, assemble and test the average complexity of units and mechanisms of machines, apparatus, pipelines and fittings. To carry out repairs of medium complexity of installations, machine units, as well as complex ones - under the guidance of a mechanic of higher qualifications. Disassemble and assemble piping devices, pumps, compressors. To carry out locksmith processing of parts according to 11-12 grades (4-5 accuracy classes). Manufacturing of medium complexity devices for the assembly and installation of repaired equipment.
Locksmith for the repair of technological installations of the 3rd category MUST KNOW:
The device, purpose and principle of operation of the repaired equipment, fittings. Specifications for pipes, profile steel, fixing materials. Basics of welding, properties of welded metals. Equipment operation rules. Rules for laying pipelines. Schematic flow diagram and communication diagram of the serviced installation. Tolerances and fits, qualities, roughness parameters.
QUALIFICATION - GRADE 4
SHOULD BE ABLE TO:
To disassemble, repair, assemble complex installations, machines, apparatus, pipelines and fittings using lifting mechanisms. To carry out locksmith processing of parts according to 7-10 qualities (2-3 classes of accuracy). Remove and install service and control safety valves from the vessel equipment. Test, adjust and commission the equipment after repair. Make complex devices for the assembly and installation of repaired equipment. Prepare defective repair lists.
Locksmith for the repair of technological installations of the 4th category MUST KNOW:
Purpose, arrangement of complex equipment. Technical conditions for the repair, testing, adjustment and delivery of the equipment being repaired. The basics of preventive maintenance. System of tolerances and landings, qualities and roughness parameters. Methods for marking and processing simple various details. The device of lifting mechanisms and the rules for using them. Rigging basics. Rules for checking repaired and assembled units and devices.
QUALIFICATION - 5 GRADE
SHOULD BE ABLE TO:
To produce, repair, install, dismantle, assemble, test and adjust especially complex unique installations, devices, machines and assemblies using mechanisms. To identify and eliminate defects during the operation of the equipment when checking during the repair process. Check for accuracy and stress testing of refurbished equipment. Handle tools and machinery with care, use materials and energy sparingly. Comply with the requirements of labor safety, industrial sanitation, fire safety and internal regulations.
Locksmith for the repair of technological installations of the 5th category MUST KNOW:
Design features of particularly complex equipment. Technical conditions for the repair, testing and commissioning of especially complex unique equipment. Metal technology. Methods for restoring particularly complex and critical units. Permissible loads on working parts, components and mechanisms of equipment. Modern methods of organizing work and workplace. (*)
I APPROVE:
________________________
[Job title]
________________________
________________________
[Name of company]
________________/[FULL NAME.]/
"____" ____________ 20__
JOB DESCRIPTION
Locksmith-repairman
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the mechanic-repairman [Organization name in the genitive case] (hereinafter - the Company).
1.2. A locksmith-repairman is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The locksmith-repairman belongs to the category of workers and is subject to the [name of the position of the immediate supervisor in the dative case] of the Company:
- Deputy Head for AHP,
- Deputy Head of Engineering,
- Deputy Head of Construction,
- to the head of the economic department,
- to the head of the technical department,
- to the head of the construction department.
1.4. A person with secondary education and appropriate training in the specialty is appointed to the position of a mechanic-repairman.
1.5. The locksmith-repairman should know:
- arrangement of repaired equipment, units and machines;
- rules for regulating machines;
- ways to eliminate defects in the process of repair, assembly and testing of equipment, units and machines;
- device, purpose and rules for the use of the used control and measuring instruments;
- design of universal and special devices;
- ways of marking and processing simple various details;
- system of tolerances and landings;
- qualities and roughness parameters;
- properties of acid-resistant and other alloys;
- basic provisions of preventive maintenance of equipment;
- design features of repaired equipment, units and machines;
- technical conditions for the repair, assembly, testing and regulation and for the correct installation of equipment, units and machines;
- technological process of repair, assembly and installation of equipment; rules for testing equipment for static and dynamic balancing of machines;
- geometric constructions for complex markings;
- methods for determining premature wear of parts;
- methods of restoring and hardening worn parts and applying a protective coating.
1.6. In his activities, a repairman is guided by:
- normative acts and methodological materials on the issues of the work performed;
- internal labor regulations;
- orders and orders of the head of the Company and the immediate supervisor;
- this job description;
- rules on labor protection, safety, industrial sanitation and fire protection.
1.7. During the temporary absence of the repairman, his duties are assigned to [the name of the position of the deputy].
2. Functional responsibilities
A locksmith-repairman is obliged to carry out the following labor functions:
2.1. Renovation work.
2.2. Disassembly, repair, assembly and testing of units and mechanisms.
2.3. Repair, installation, dismantling, testing, regulation, adjustment of equipment, units and machines and delivery after repair.
2.4. Locksmith processing of parts and assemblies.
2.5. Manufacturing of complex fixtures for repair and installation.
2.6. Preparation of defective repair lists.
2.7. Rigging with the use of lifting and transport mechanisms and special devices.
2.8. Identification and elimination of defects during the operation of the equipment and during inspection during the repair process.
2.9. Accuracy and stress testing of refurbished equipment.
3. Rights
The locksmith-repairman has the right:
3.1. Give instructions to subordinate employees, assignments on a range of issues included in his functional duties.
3.2. Monitor the execution of production tasks, the timely execution of individual orders by employees subordinate to him.
3.3. Request and receive the necessary materials and documents related to the issues of their activities and the activities of employees subordinate to him.
3.4. Interact with other services of the enterprise on production and other issues within its functional responsibilities.
3.5. To get acquainted with the draft decisions of the management of the enterprise concerning the activities of the Division.
3.6. Submit proposals for improving the work related to the responsibilities provided for in this Job Description for the manager's consideration.
3.7. Submit for consideration by the head of the proposal on the encouragement of distinguished workers, the imposition of penalties on violators of production and labor discipline.
3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.
4. Responsibility and performance evaluation
The locksmith-repairman bears administrative, disciplinary and material (and in some cases stipulated by the legislation of the Russian Federation - and criminal) responsibility for:
4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.
4.1.2. Failure to perform or improper performance of his labor functions and the tasks assigned to him.
4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. Assessment of the work of a repairman is carried out:
4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.
4.2.2. The attestation commission of the enterprise - periodically, but at least once every two years, based on the documented results of work for the evaluation period.
4.3. The main criterion for assessing the work of a repairman is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5. Working conditions
5.1. The work schedule of a repairman is determined in accordance with the internal labor regulations established by the Company.
5.2. Due to production needs, a repairman can go on business trips (including local ones).
Acquainted with the instructions ___________ / ____________ / "____" _______ 20__