Simple DIY wooden lamp. Chandeliers made of wood Homemade chandeliers made of wood with your own hands

An exclusive do-it-yourself wooden chandelier will become a worthy interior decoration. An unusual wooden lamp is selected taking into account the style of the room. The variety of ways to design lighting fixtures is amazing. It is not at all necessary to purchase expensive models from recognized design specialists. It is quite possible to assemble an original wooden chandelier with your own hands. The proposed ideas will make it easier to choose the shape of a wooden lamp.

Timeless classic

Massive ceiling chandeliers wooden ones appeared at the dawn of the 16th century. Most often, the main ones were tree branches, the edges of which were crowned with candles. Castles of wealthy gentlemen and churches were the main areas of application for unique lighting devices at that time. But if previously wooden chandeliers performed a purely practical lighting function, now more attention is paid to the appearance from the point of view of decorating the room.

The emergence of new practical materials and the development of technology has not weakened interest in natural sources. The tendency to care about the environmental safety of surrounding objects and own health- one of the reasons for the increase in popularity on wooden chandeliers.

Attention! The variety of forms of wooden lamps allows them to be used not only in traditional rustic styles, but also harmoniously introduced into more modern trends interior

For country and chalets, antique wooden chandeliers are still relevant. Adherents of brutalist interiors can easily assemble a simple chandelier with their own hands, where the frame is a powerful wooden beam. For lovers of original configurations, the designers have prepared a lot interesting ideas, and many ideas can be realized independently.

Concern about the high cost of a chandelier is justified only when choosing complex configurations, where jewelry work is required to process the array or additional expensive materials are present. In most cases, the price is in the budget category.

A variety of wooden chandeliers are shown in the photo:

Advantages and disadvantages of wooden lamps

A wooden lamp is always stylish. Buy finished model won't be difficult. But if you decide to decorate a wooden chandelier with your own hands, it is better to familiarize yourself with all the positive and negative aspects of such a choice in advance.

Main advantages:

The numerous advantages of chandeliers are overshadowed by some disadvantages:

Initially, wood is a flammable material and therefore requires special treatment. Protection with fire retardants and insecticides will prevent the lighting fixture from igniting or damage to the frame by insects.
If you want to make it yourself or purchase a chandelier made of oak or mahogany, you will have to part with a large sum.
Using insufficiently dried wooden blanks or poor quality Preliminary processing material will lead to deformation of the chandelier.
Even though reliable protection, the use of wooden lamps in rooms with increased level humidity is undesirable.

Attention! When designing a lighting fixture, you should think in advance about the type of lamps used. LED spotlights or LED spotlights are ideal for these purposes. fluorescent lamps, which are not prone to heating.

Wooden ceiling chandeliers various models shown in the photo:

Antique chandeliers

Antique wooden lamps can be divided into groups according to the category of complexity. Some are presented in simple forms and can be made by hand even by novice craftsmen. Others are more complex and require specific woodworking skills and special tools on processing.

Exploring a broad model range will give you an idea of the possible options for decorating a room with a wooden chandelier.

Simple geometric shapes connected by chains and decorated spotlights, it is quite possible to assemble it yourself. The deliberate roughness of a wooden chandelier will look trendy in village hut, a simple country house.

Another original wooden chandelier model demonstrating simplicity rustic style. The highlight of the lamp is given by light ropes, contrasting in color with the dark wood. The configuration is ideal for DIY assembly. A suitable setting for such a lamp is a country-style interior.

Another example of a chandelier made of wood with a laconic shape that does not require significant effort to self-production. A couple of bars, a small piece of chain and 4 LED lamps - and the main part of the kit is already at hand.

Artificially created contrasting veins are part of the designer's intention. You can assemble a similar model of a wooden chandelier in one weekend. The only thing you should take care of in advance is to find suitable lampshades; classic glass would be inappropriate here.

Working on numerous lampshade strips can take a lot of time and effort, so if you don’t have enough experience, it’s better to purchase a similar wooden lamp ready-made.

Chandelier where in a harmonious way wood, metal and glass are combined, invisibly immersing you in the atmosphere of the Middle Ages, where along the dark corridors you can meet a knight in armor. This lamp will fit perfectly into the interior of a spacious living room. country house or a cafe where the theme of antiquity is interestingly played out.

Candle-shaped lamps most closely match the antique theme. A ceiling chandelier made of wood with numerous hanging elements can dispel the darkness even in a large room. If you have experience working with metal, you can assemble such a wooden model yourself.

Another example of the designer’s original concept, where everyday objects become an accent element of the interior. Hunting lodge or a village tavern is a suitable place for a non-trivial wooden chandelier.

Comment! Such wooden models on chains are best hung in rooms with high ceilings. Standard height 2.5 m will not be enough.

Unique torches are another simple way to find yourself in a medieval setting. The finishing of the wooden lamp with metal and the lamp in the shape of candles fully corresponds to the idea of antiquity.

The wooden chandelier, where the frame resembles the steering wheel of a ship, looks more sophisticated than previous examples. A similar wooden model will harmoniously fit into the interior with Mediterranean style. It will be difficult to translate the idea into reality with your own hands due to the presence small parts and glass shades.

It will be possible to master the production of such a chandelier from wood experienced craftsmen. The lamp is ideal for interiors where eco style prevails.

Horns of wild animals as the frame of a wooden chandelier - what could be more interesting. It will be difficult to find such a base, so it is better to satisfy the idea you like with a ready-made lamp.

The section of antique wood chandeliers ends with a photo of a unique combined example of the two previously presented models.

Original design ideas

Country, chalet, eco style are not all areas where wooden lamps are applicable. An interior in the Art Nouveau style often includes non-trivial solutions for common household items. This tradition extends primarily to chandeliers.

Everyone will determine the place and suitable design for the original models presented below on their own.

The laconic outlines of a wooden chandelier, topped with LED lamps along the edges of the branches, are optimally suited for an interior where minimalism and functionality are at the forefront.

The complex-looking geometry of the following wooden lamp is quite simple to make with your own hands. LED bulbs and bars corresponding to them in length are the main parts of a non-standard wooden chandelier.

Another example of laconic and at the same time original form wooden lighting fixture. Here you will need to prepare grooves for laying in the wooden planks in advance electric cable. Lamps of a different shape give a completely different perception of the chandelier than in the previous sample. The undoubted advantage of both wooden models, which you can easily assemble with your own hands, have the ability to illuminate a large space around, so they are ideal for arranging a terrace or gazebo.

Another wooden specimen intended for outdoor use. The unusual shape of a wooden chandelier is fixed on a pole and provides full illumination of the surrounding area.

A real wooden masterpiece, appropriately complemented with glass inserts, will adequately decorate the most presentable interior. Scandinavian style or another eco trend will organically accept a sophisticated wooden chandelier.

An identical model of a smaller lamp is suitable for the interior of a small room. This could be a kitchen or a children's room.

Returning to the topic of geometry, I would like to present another simple and at the same time interesting example of a wooden chandelier, which will not be difficult to assemble with your own hands.

An unusual combination of an openwork base, complemented by matte shades. A similar chandelier made of wood and glass will not go unnoticed and will successfully act as an accent element of the interior.

The lamp made of metal and wood is highly functional due to the ability to adjust the direction of light flows. The idea is difficult to implement on your own, so it is better to buy a ready-made copy.

DIY wooden masterpieces

To assemble a wooden chandelier with your own hands, experience with wood will not be enough. You will also need basic electrical knowledge. You can take a ready-made wooden model as a basis or develop your own original design. Depending on your skills in handling metal, choose an exclusively wooden lamp or a lighting device supplemented with metal elements. The photo gallery will demonstrate once again possible options making your own wooden chandeliers.

Wooden chandeliers are stylish element interior, which is suitable not only for rustic design trends with national flavor, but also modern ideas room decoration. Country and chalet, Scandinavian and eco style, modern and loft - for each style you can choose a successful model of a wooden lamp.

The topic of our article is ceiling lamps made of wood. We will analyze the advantages and disadvantages of this material both from the point of view of design and from all other aspects; We will find out where these lamps can be used, and where it is better to use other materials.

Finally, we will learn how you can make a wooden lamp with your own hands with little effort and time.

What is wood associated with in room design? First of all, with antiquity, with the Middle Ages. With time, when people woke up to the singing of birds, and not the noise of cars outside the window; when men were courageous, women did not know the word “emancipation”, they were punched in the face for meanness, and life was much simpler and clearer.

That is why wooden lamps most often have deliberately ancient shapes. For example, chandeliers in the shape of a cart wheel are very popular.

After all, this is what real, let’s say, indoor lighting systems looked like several centuries ago: an old wheel on chains or ropes was suspended from the ceiling, and candles were placed on it.

Why is a wheel with spokes convenient as a stand?

Why did the ancestors settle on this form?

When the candles were placed evenly, it gave equal illumination to all parts of the room;
The spokes created minimal obstruction to the light, unlike a solid rim.

Modern stylizations have the same advantages; of course, instead of wax candles or rays lamps are used. Most often, of course, also in the form of a candle.

However, we digress. What is bad and what is good about wooden ceiling chandeliers?

Features of the material

Advantages

Wood is not just environmentally friendly. Wood not only does not emit harmful substances; against, for a long time it saturates the air with aromatic resins, which make breathing easier for asthma patients and relieve inflammation respiratory tract…
What can I say - you probably remember how easy it is to breathe in a recently felled wooden house!
Wood is easy to process, which opens up wide scope for creativity. If the manufacture of a lamp made of plastic or chromed metal requires devices that are not available in a standard city apartment, then lamps made of wood require minimum set hand tools.

However, alas, not all features of wood as a material for a lamp are as pleasant:

Flaws

A tree is still flammable material . Position wooden elements near incandescent lamps that are going out of fashion is an extremely bad idea; a burnt contact in the lamp socket can also lead to a fire.

Wooden chandeliers are susceptible to attacks by bloodthirsty bugs- woodworms, fungus and other evil spirits.

Note: conifers wood suffers from insects and rot to a much lesser extent.

In addition, for hardwood there are antiseptic impregnations, which at the same time reduce the flammability of wood.

Wood is a hygroscopic material. It absorbs moisture from the air; when drying, it can change volume, deform and crack.
If we want our lamp to retain its functionality for a long time appearance- we will have to provide it with more or less constant temperature and humidity.

conclusions

The negative features of wood are not given to dissuade you from buying or making a wooden lamp, not at all. Let us repeat, this is a wonderful, very beautiful and easy to process material.

However, you need to use it wisely:

Lamps made of wood must be shaped in such a way that all heating elements (sockets and lamps themselves) are as far as possible from the wooden structural elements.
It is better for the lamps to point upward: then the upward flow of heated air will not cause deformation of the wood.
Standing apart are the lamps, the very style of which involves the use of natural cracks in dried wood. For example, a log with lamps suspended on chains looks great both dried out and cracked.

For reasons fire safety It is undesirable to place wooden chandeliers under flammable ceiling elements.
Yes, the same log on chains will look amazing under an equally old-looking one; however, if it catches fire, the fire will spread very quickly.
Wooden lamps are perfect for a bedroom or living room. But in the kitchen with its abundance of steam when cooking or in a damp bathroom, wood is inappropriate.
It will crack quickly; besides, raw wood is no longer a dielectric at all.

If a phase is shorted to the wooden elements of the lamp, it is quite possible to receive an electric shock. If at this moment you hold on to a grounded pipe or bathtub, troubles can be very serious...

Homemade products

Need I say that something made with your own hands is much more pleasing than something purchased? Yes, your lamp may not be as neatly made as a store-bought one; but the joy of creativity is worth reconciling with the small shortcomings of the product for its sake.

In addition, you will know absolutely for sure that your lamp was made in one copy. Not a single guest, coming to you, will see exactly the same chandelier as at home. Homemade ceiling chandeliers are always exclusive.

Coffee service

We will need:

Dry board from any wood. The texture of ash is very beautiful; oak does not need to be stained or varnished. But ordinary pine, spruce or birch will also work.
Three translucent coffee cups and three saucers to go with them.
Three cartridges for a small base with fastenings for them.
Three matching light bulbs. Preferably LED lights: remember the fire safety recommendations outlined just above.
Three or six rubber gaskets. The quantity depends on the method of attaching the cartridges.
Meter - two two-wire copper wire minimum section. 0.75 mm is enough for the eyes.
A thin chain or twisted cord to hang a structure from, for example.
Four screws for the ring instead of the cap. It is for them that our lamp will be hung.

In addition, you need to stock up on a drill with drill bits for wood and tiles, pliers and a screwdriver.

Let's get started:

We process the planed board with sandpaper - first coarse, then finer.
We drill three holes where the cartridges will be located.
If noble types of wood are used, then the processing of the board ends there. If the wood is simpler, we cover it with stain and after drying, varnish it twice.
The nitro varnish only dries in the air for a couple of hours, so you won’t have to wait long.
Then comes the most dangerous step: we need to drill holes in the coffee cups and saucers without breaking them.
We use only and exclusively drill bits for glass and tiles. Great efforts are unacceptable; We drill slowly, without distortions. Key moment- when the tip of the drill passes through: pressing the drill a little harder at this moment will split the cup or saucer.

We attach wires to each cartridge. Until we fasten them to each other.
We screw the entire future lamp into a single whole. If our chucks use platforms with holes for screws, we pull them to the board directly through the holes in the saucer and cup.
If there is a hollow threaded tube and a nut at the end of the cartridge, we again pass them through the cup, saucer and board. A rubber gasket is placed between the metal and glass.
You can cut it yourself from an unnecessary bicycle or car tube; you can use a ready-made gasket suitable size from any repair kit for plumbing.
We screw screws with rings into the back side of the board.
We connect the cartridges in parallel. You shouldn’t leave the twists wrapped in electrical tape: we’ll carefully even do the side of the lamp that no one will see. Use a block to connect the wires.

The block is fixed on the back side of the board in any way - a drop of glue or a screw. A piece of wire that will be connected to the wiring is clamped in it.
We attach chains or cords to the rings on the back side; their other end is attached to a hook in the ceiling. The wire runs along one of the chains. Light bulbs are screwed in.

Press the switch and enjoy.

As you understand, the shapes that wooden chandeliers can take are limited only by your imagination. Let's show a few more original designs.

Sailboat made from driftwood and TV packaging

This original lamp is made from oddly shaped driftwood picked from the forest. The author kindly posted a photo of his creation online.

The structure, of course, is not a fire safety monument. However, remember that LED lamps are extremely economical and practically do not heat up. If so, the risk of fire is reduced to nothing.

Chandelier made of dry boards and rope

Here, two ready-made matte lampshades are used as light sources. The simplest and most inexpensive. Everything else is the author's improvisation.

What is most striking is not that the lamp was made by hand: as you can see, there is nothing structurally complex about it. It is surprising that the author of the work was able to see beauty in such a seemingly worthless thing as old board. And show this beauty to others.

Please note: in this design it is also worth using only and exclusively energy-saving or LED lamps.

Incandescent lamps, especially high-power ones, create a very real fire hazard.

Timber with pots

And such ceiling lamps are not mass produced. Looks very original. To drill the bottoms of pots, you also need to use only and exclusively tile drills. In addition, you should not use incandescent lamps here either. Even low-power ones.

Hollowed out log with soffits

Another fire inspector's nightmare come to life. However, here too the use of light sources with minimal heat generation reduces the risk of fire to nothing.

Despite the exaggerated and simple appearance of the lamp, it can hardly be called made in five minutes on the knee: it was probably difficult to hollow out the log inside.

Conclusion

If you liked the wooden ceiling lamps described and shown, great. Even better if you have your own, original ideas. As you can see, they can be the most unexpected. Good luck with your creativity!

Using beautiful lamps is one of the simple ways diversify the interior and make it better. Wooden sconces are a stylish symbol of comfort, which will definitely never cease to be relevant and can be used in classic interiors, and in modern ones. It is worth considering which lamp options from natural wood exist, how to use them in the interior.

A little history

A few years ago, crystal lamps were considered a symbol of luxury. Now they are gradually being replaced wooden sconces. This is the return of the old tradition, when it was wooden lighting decorated the houses of the rich and even palaces. Of course, these were very simple products, which are far from those lamps that can be found in modern stores.

The fashion for wooden sconces returned in 2010. Then the designers wanted to draw attention to the disaster that took place in New York, and began to create interesting lamps from branches that resembled driftwood left after a tornado.

This inspired others, and soon the fashion for such sconces returned. Now you can even do it yourself unique lamp, decorating the wood with garlands or LED lights. This will make the interior truly unusual and customize everything exactly to you and your preferences.

Advantages and disadvantages

Wall lamps made of wood have both many advantages and a number of disadvantages. Both of them are worth talking about in more detail.

pros

The most important advantage of a lamp made of natural wood is the environmental friendliness of this material. If the wood is minimally processed, it will be completely safe for your health. This means that you can easily mount such a lamp on the wall, even in a nursery. Wood is also good because it saturates the air with resins, which make breathing easier.

Another positive point is that wood is easy to process. This means that you can create the most different shapes lamps, you can also decorate them with interesting patterns. Products made from natural wood are very stylish and beautiful. The advantages include the strength of a material such as wood. Wood is very durable.

If it is further processed special impregnations, then the lamp will turn out to be of even better quality.

Minuses

However, not everything is so simple, and wooden sconces have certain disadvantages. These nuances primarily include insecurity . In a lamp made of natural wood Incandescent lamps must not be used. This can be unsafe: if the contact in the socket of such a lamp burns out, the tree can also catch fire quite quickly.

Wooden products may attract insects. However, here too the problem can be solved - with the help of simple impregnations. There are solutions that can protect wood from pests. It is recommended to give preference to lamps made of coniferous wood.

The last of the minuses is Moisture is very harmful to wood. This material accumulates it extremely quickly, after which the surface of the sconce can become deformed and lose its attractiveness.

In order for the lamp you purchased or created to last a long time, try to hang such a device only in a room where there is no high humidity.

Such sconces are more suitable for bedrooms and living rooms; you should not hang them in the bathroom or kitchen, where the surface of the wood will constantly be exposed to hot steam.

By the way, it is also worth noting that there are breeds that are less susceptible to moisture. This is, for example, cedar. A cedar wood lamp treated with special solutions will last you longer.

Options

There is a wide variety of wooden sconces that can be selected for decoration. different rooms. Here are some interesting ideas that may inspire you.

Classical

If you want a little classy style, look to antiques. A classic wall night light, stylized as antique, looks very interesting in the appropriate interior. This lamp will make the room more comfortable. The main thing when choosing classic sconces made of natural wood is not to overdo it. If you hang several expensive sconces in a room at once with decoration reminiscent of past luxury, then this may be unnecessary.

Modern

Many designers are pleased with their experiments. For example, the Curve brand. This is a company that produces interesting lamps, each of which will perfectly complement the modern or high-tech style.

Geometry

However, it is not at all necessary to experiment with shapes; you can settle on a classic product made in the form of a square or circle. Such wooden sconces look good in minimalist style rooms.

Self made

Handmade lamps deserve special attention. It's always something unique and unusual. At the same time, you don’t always need to know how to work with wood - a stylish lamp can be created even from a simple twig, coated with varnish and special impregnations.

A garland or LEDs will act as a light source here. In both cases, the lamp will not heat up, which means that it will be absolutely safe.

In what interior should I use it?

Almost any house or apartment can be complemented with a stylish lamp made of quality wood. The main thing is to skillfully combine various details and organically fit the sconces into the interior. So, for example, in modern apartment a wooden lamp with a forged base will definitely be out of place. You need to know how to avoid such mistakes and where to install natural wood sconces.

In the bedroom

Since most people associate wood with a feeling of comfort, a lamp made from this noble material fits perfectly into the interior of any bedroom:

For a place of rest married couple designers usually recommend choosing something simpler and more discreet - for example, square sconces, wooden clouds complemented by LEDs, or simple panels decorated with patterns. Perfect option for the bedroom - a wooden night light, shining with soft colored lights. Dim lighting will help create a pleasant relaxing atmosphere in the room.
For children's you can choose something special - for example, a wall night light that transmits rays through shaped openings, creating beautiful patterns on the walls, or a lamp made in the shape of an interesting animal or cartoon character. Even an unpainted tree will still look quite cute and unusual.

In the living room

A sconce with elegant carvings along the entire perimeter of the floor lamp will complement a modern living room. You can pay attention to lamps complemented with fabric elements or metal and glass inserts. The latter are best suited for decorating a room in the Art Nouveau style. This option is very suitable for a loft-style apartment.

Original designer lamps made of wood. Homemade lamps made of wood photo.

If you like to do everything with your own hands, we recommend to your attention a selection of the most original wooden lamps made by designers. But to make such lamps you don’t have to be a designer at all, just look at these photos, show a little imagination and you will succeed.

Wood is a unique material, it has been used for home improvement since the time of our ancestors, wood has positive energy, it's completely environmentally friendly pure material. In this article we will look at the most original options making lamps from wood.

Ceiling lamps made of wood.

Original hanging chandeliers wood lamps.

Homemade chandelier flower garden.

Chandelier ball, made of rope. To make such a chandelier, an inflated balloon is used, which is wrapped with rope, then the rope is covered with glue, when the glue dries, the balloon is deflated and the result is a structure from which you can make a pendant lamp.

Lamp from a pallet. Wooden pallet sawn into pieces which are used to make lamps.

Original solution.

A lamp made from ordinary kitchen graters.

Wicker lamps. Here a basket is woven from a thin vine and hung from the ceiling.

Table lamps made of wood.

Night light made of wood.

Wooden lamps self made perfectly complement the interior, making the atmosphere of the home warmer and more comfortable. Original lamps wood is used enough in great demand V Lately, becoming a familiar element not only home environment– they can often be found in cafes, restaurants, museums, and other public places.

Such a thing can fit perfectly into the interior and elevate it if you choose materials that best suit the situation.

Features of the material

Natural wood, except its own aesthetic properties, has a number of significant advantages. Products made from it are easy to use and environmentally friendly. When heated, wood does not emit toxic substances, but on the contrary, has a beneficial effect on people with chronic respiratory diseases, having medicinal properties. This effect is especially typical for coniferous species.

Wood is a material that is pliable enough to in capable hands master to obtain exactly the forms that he intended. Therefore, any creative design ideas are brought to life. Luxurious photos exclusive wooden lamps easily convince of this.

The material is quite versatile, due to which it can be used widely, in almost any type of interior. Interesting configurations and a variety of shapes allow the item to organically fit into any style.

Wooden lamps in the interior look solid and noble, moreover, they perfectly coexist with objects from the most various materials: plastic, glass, metal.

Along with the listed advantages, wood also has disadvantages. It is highly flammable, for this reason the products should not be placed in rooms containing fireplaces, gas stoves and other sources of possible ignition.

The material is very sensitive to temperature changes and high humidity, so placing wooden lamps in the bathroom or kitchen is extremely undesirable. In addition, wood attracts small pests - termites and other insects. It is advisable to cover the products with special protective compounds, which will prevent their appearance and protect the material from deformation.

When using an electrical appliance, observe a number of simple precautions:

place the light source sufficiently long distance from open fire(fireplace, stove);
remember that optimal place for the location of the device, rooms with normal humidity levels and room temperature are considered;
wooden lamps do not allow the installation of ordinary incandescent lamps in them: their heating temperature is too high, it is unsafe; use LED, halogen, fluorescent lamps.

Application in various interiors

The versatility of wooden lamps allows them to be used when decorating the most various rooms, regardless of style. They are most appropriate in the setting of a country house, decorated in country, Provence, and oriental styles. The combination of natural simplicity with sophistication is the most valuable quality of wood.

Original “antique” lamps made of wood are widely in demand in retro styles. They are often made in the shape of cart wheels, with candle-shaped lamps located around the circumference. This design is usually used in restaurants, bars, and hotels.

Ceiling models look great in large rooms and living rooms, bringing luxury and elegance to the interior. Spot options lamps are relevant for small rooms, especially if they have low ceilings.

Lamps suitable for country style simple shapes, without any frills. They may look a little rough, but they will create a feeling of unity with nature and fit organically into the space without conflicting with other objects.

Oriental style requires the use of solid wood, welcomes clear shapes and lines, complemented by oriental motifs.

Characteristic of retro classic options or more original models, stylized as antiques.

Classic makes it possible to use stained glass, a lampshade for a lamp can be made from it; wooden structures have smooth, streamlined shapes.

High-tech allows you to create original designs, combining wood with metal, frosted glass and other materials.

How to make a lamp from wood with your own hands

Of course, by ordering a product in special workshops, you will receive a perfectly made, polished product. However, if you have experience working with wood, you can try to create an exclusive item yourself from the material that is available to you.

DIY wooden lamps are made from:

branches;
boards;
bark;
cuts;
logs;
veneer

If you have an idea that you can’t wait to implement, you can safely get started. First, the wood must be prepared by treating it with protective solutions and impregnations, and wait until it dries completely.

This stage is mandatory: an untreated product will not last long. The structure is then assembled and fastened together. We invite you to try several original options.

Driftwood lamp

This creative idea will not require much effort or expense to implement - use driftwood found in the forest under your feet. They are exclusive in themselves: every bend of the branch is unique. All you need to do is find a suitable specimen, clean it of bark and excess wood, then dry it thoroughly. For drying, a ventilated place away from direct sunlight is suitable.

After complete drying, you need to sand the driftwood well using sandpaper. Determine the side that will be attached to the ceiling. Using a blade, make grooves on it into which you will lay the wires. After finishing work with the wires, the holes must be carefully filled with putty, and then treated with stain and putty to match the color of the wood.

Cartridges are attached to the ends of the driftwood, you can come up with various ways their fastenings. When finished, treat the wood with varnish. It is necessary to lay several layers and dry each one. Choose acrylic or waterproof varnish.

In a similar way, you can also construct table lamp or sconce - driftwood will serve as an excellent base. This idea is easy to implement even if you do not have carpentry skills.

Chandelier made of branches

Gather carefully selected small branches together so that some of them are perpendicular to the ceiling. Next, you need to attach the lampshades to the ends of the branches, and carefully wrap the wires around them. Instead of branches, you can use real rhizomes if you are lucky enough to find one in the forest.

Find and implement your own ideas - wood gives you a lot of opportunities to experiment using your imagination. You will be rewarded for your creative impulses by receiving a designer product that will become an interior decoration.