How to clean the tiles in the bathroom from plaque if the usual cleaning products do not help? After all, if you don’t remove plaque on time, it will be much more difficult to get rid of it over time. It will be very difficult to achieve radiant cleanliness and shine in the bathroom.
What is this article about?
Special products for removing plaque
How to clean bathroom tiles quickly and efficiently? Modern industry offers a wide variety of plaque removal products.
Tile cleaning products have many properties:
- effectively remove mineral deposits;
- remove unpleasant odors;
- have a detrimental effect on bacteria;
- give a pleasant aroma.
However, not every housewife can choose the right remedy for cleaning tiles or afford to buy it. In order to save money, they most often buy universal products that have a comprehensive effect on plaque, rust and mold. With their help, you can quickly and effectively clean tiles, since they contain potent substances. However, it should be taken into account that for some surfaces universal products cannot be used. Eg, acrylic surface May be damaged by solvents and acids.
Many enterprising housewives use household products with chlorine to combat plaque. They are often not designed to remove stains from the bathroom. Therefore, in many cases, instead of the expected result, you can get unexpected side effects in the form of discolored tiles.
How to clean bathroom tiles without damaging its surface? For this purpose, it is best to use a liquid or cream product. It should not contain acids, since they have a bad effect on the seams between the tiles. Be sure to read the instructions for use to ensure that the product can be used to clean bathroom surfaces.
It is better to refrain from using powdered products. Solid particles can damage the tile surface, especially if it is matte. Using them will result in scratches and loss of shine.
What to wash with tiles, if the contamination is very old? If gel detergents fail to have the desired effect, only in this case can you resort to using a powder detergent. However, it must be used very carefully so as not to damage the tiles.
You can clean bathroom tiles using the following products:
- Mr. Muscle;
- Cillit;
- Domestos;
- San Klin;
- Comet et al.
After renovation in the bathroom, the tiles must be washed immediately. If this is done in a timely manner, you can do without the use of special means. After all, if you leave the remains of grout, cement and other building materials on tiles, cleaning them will be very problematic.
Folk remedies for cleaning bathroom tiles
How to wash bathroom tiles for people who are prone to allergic reactions? It is better for them to refrain from using industrial products and should turn to old and proven traditional methods, which are not capable of causing harm to the human body.
How to wash the tiles in the bathroom if the dirt is very minor? For regular maintenance of bathroom tiles, you can use regular soap solution. It will remove dirt perfectly provided there is no rust and lime deposits. You need to not only wash all surfaces well, but also wipe them dry. With this simple action you can prevent the formation limescale, which appears in conditions of constant humidity.
You can wash the tiles in the bathroom well using 6% or 9% table vinegar, which every housewife has. The acid will help to effectively remove dirt and limescale deposits, and it also has a disinfecting effect. The only drawback of this method is that it cannot be used very often to clean tiles, since the acid will corrode the unprotected seams between the tiles. Table vinegar is applied to surfaces using a spray bottle or ordinary rags. At heavily polluted You need to leave it for a few minutes and only then start washing the tiles. After cleaning, the tiles must be wiped dry.
You can enhance the cleansing effect of table vinegar with baking soda. When baking soda and vinegar interact, a chemical reaction develops, causing the deposits to soften so that they can be removed without any effort. Soda powder moistened with water is applied to the stains, and table vinegar is sprinkled on top. After a few minutes, wipe the tiles with a wet cloth and then dry.
How to clean bathroom tiles using citric acid? This product must be used very carefully, as the acid crystals can greatly damage the surface. Especially if the plaque is very difficult to remove and force must be used to completely get rid of it. The powder is poured onto a sponge moistened with water, and all contaminated surfaces are carefully wiped. To avoid scratching the tiles, citric acid can first be diluted in hot water.
How to clean bathroom tiles using bleach? Although modern industry offers many chlorine-based products, but they still continue to use it in its pure form. The product must be applied to the limescale and left for 5-10 minutes. Chlorine acts on plaque, corroding it. But you need to be careful with the bleaching property of the chemical. Chlorine should not be used every time you clean as it can damage the tiles and discolor them.
How to wash bathroom tiles to restore their shine and shine? To do this, you can use ammonia. To do this you need to dilute 1 tbsp. l. ammonia in 2 liters of water and sprinkle on the tiles. After a few minutes, wipe all treated surfaces with a clean, damp rag and wipe dry.
How should you clean tiles?
Cleaning tiles in the bathroom should be done using individual funds protection. Many industrial products contain aggressive and potent components that can damage the skin of your hands. When cleaning tiles, be sure to wear rubber gloves to protect your hands. When using chlorine, be sure to wear a mask to protect your respiratory tract.
How to wash tiles correctly? At first glance, there is nothing complicated here, but there are certain recommendations that will help make caring for your bathroom easier. You need to start washing the tiles from the bottom up. And rinse off the cleaning agent and wipe dry - on the contrary, from top to bottom. Be sure to rinse off the cleaning or washing solution thoroughly. Do not leave a drop of moisture on the tiles. 
How to clean tiles without scratching them? It is necessary to take care not only of a suitable cleaning agent, but also of special sponges. Under no circumstances should you clean tiles with metal brushes. It is better to use a soft, lint-free rag or a melamine sponge, which contains crystals that turn into foam when exposed to water. These materials absorb moisture well and do not leave streaks or threads on the tiles.
In order not to think about how to remove plaque from the tiles, you need to prevent it from appearing. Every day you need to remove all moisture on the tiles after washing, showering or bathing. If there is the slightest sign of contamination, it is necessary to wash them with a soap solution. This is the simplest, most accessible and safe way, which will help you easily deal with minor problems in the bathroom. Should be provided good ventilation premises to prevent the formation of condensation.
By adhering to these simple rules, the housewife will enjoy cleaning, and a clean shiny tiles in the bathroom will be her pride.
The bathroom is associated with cleanliness and hygiene, and therefore maintaining order here is simply necessary. In this difficult task, you will find our advice useful on how to clean plaque from tiles.
The walls and floors in the bathroom are constantly exposed to moisture. Not only does it get on the tiles pure water, but also various means from your cosmetic arsenal, dirt, fatty deposits gradually accumulate. The most terrible enemy is considered to be a white layer of lime, which hardens over time and practically fuses with the tile.
To prevent a “catastrophe”, follow the rules:
You need to wash the tiles regularly, without waiting for visible dirt to appear.
The area near the tap is more susceptible to the formation of limestone and rust.
The wall along which the shower or bathtub is located must be cleaned of grease deposits.
Don't forget to periodically clean or completely renew the grout between the tiles.
Consider the properties of cleaning products so as not to spoil the coating (for example, bleaches are not suitable for dark and bright tiles).
It is convenient to use a melamine sponge or a regular foam sponge. Instead of metal brush use synthetic or natural loofah loofahs. In order to rub the tiles, it is best to take a rag from wool fiber or microfiber - they do not leave behind dust or stains.
Do not try to chip limestone from the tiles - you may damage the surface.
When cleaning, use a mask to protect against chemical fumes and gloves to keep your hand skin safe and sound.
Store cleaning products according to instructions and away from children! Direct sunlight and high temperatures are prohibited, as this can cause a fire in household chemicals.
Top 7 tile cleaning products
To clean tiles, dozens of products of different composition and origin are used. We offer you 7 of the most popular options suitable for getting rid of limescale and other types of dirt.
Household chemicals
The simplest and most obvious option is to purchase a special detergent. ceramic tiles. Most often they contain various acids and bleach. Sprays and gels are suitable for tiles, but it is better not to use powders and pastes with abrasive particles so as not to damage the glossy surface of the tile.
For shiny tiles with a glossy finish, you can use glass cleaning sprays. They contain acids that can dissolve almost any plaque. In addition, alcohol disinfects the surface and makes it shine.
You can also prepare a cleaning solution based on washing powder, dish gel, or laundry soap. These products are perfect for weekly bathroom cleaning.
The disadvantage of household chemicals is their composition. Some components are toxic and harmful to the skin. Another disadvantage: not all manufacturers provide accurate information on the label. You can pay a considerable amount for a product that promises to clean the walls of old plaque in 1 application, but in reality a miracle will not happen.
If you don’t know which product to choose, watch the video comparing Silit, Express Gel and Faberlic:
Ammonia
Ammonia is used not only to wake a person from fainting, it is also an effective means for cleaning glass and tiles. Ammonia is a 10% solution of ammonium chloride (ammonia). The pungent odor necessitates a powerful hood or good natural ventilation, which is not always possible to provide in the bathroom.
To prepare the working solution, you need to dilute one cap of ammonia in a bowl of water. The surface is treated with a rag and washed after a while. clean water.
Bleaching
Bleach also may not have a pleasant smell, but it is a powerful bleaching and disinfectant. It can be used to wash not only walls, but also tiled floors to destroy bacteria and fungus along the seams.
Chloride of lime is sold in the form of powder, tablets, or is included in special products, such as Whiteness. An aqueous solution is prepared from it, which is used to wash all dirty surfaces and plumbing fixtures. Then you need to rinse them with clean water to remove the caustic layer and bad smell.
Soda Ash
Ideal for white tiles soda ash. This is a technical powder used for cleaning and bleaching surfaces. In addition to limescale and grease, soda will perfectly clean the seams between tiles.
Don't forget that soda is an abrasive, and therefore vigorous rubbing can lead to scratches on the surface of the tile.
Lemon acid
If you are bothered by the unpleasant odor of some of the products mentioned above or you want to use the most natural cleaning compositions, pay attention to citric acid. It is the acids that ensure the dissolution of plaque on the tiles.
To clean the bathroom you can use:
- a slice of lemon;
- squeezed lemon juice;
- lemon solution.
Rub the dirty area on the tile thoroughly and leave it for a while for the acid to take effect. With lemon you can restore shine to surfaces, including bathroom fixtures. Another pleasant bonus is a fresh aroma in the bathroom. But if you are allergic to citrus fruits, you need to be careful with this product.
Vinegar
You may not have lemon on hand, but every kitchen will definitely have vinegar. Acetic acid is another universal folk remedy for cleaning shiny surfaces.
To wash the tiles, you can use table vinegar or essence. Due to the different acid concentrations, it is important to properly dilute the aqueous solution. If you have old hardened dirt, but if you have protective gloves, you can lubricate the problem area with pure essence. However, keep in mind that such a concentrate may affect the color of the tiles. It is better to wipe colored surfaces with a weaker solution so that you do not have to change the lining after such cleaning.
Vinegar also does not have a pleasant aroma, so ventilate the room well. To neutralize odors, use fabric softener or ammonia(of course, it is better to choose the first option).
You can enhance the cleaning effect by mixing baking soda, vinegar and hydrogen peroxide. This mixture is suitable for whitening surfaces from yellow plaque and seams between tiles.
Steam cleaner
Old stains and deposits on tiles in the bathroom, kitchen or hallway can be cleaned using a steam cleaner. This device operates simply: water is heated to the temperature of steam formation, special nozzles direct steam to the surface being treated, under the influence high temperature and the moisture deposit literally “melts away”.
A steam cleaner is used not only to remove lime from tiles, but also allows you to clean the seams from fungus and mold. In addition, the steam disinfects the surface, which helps protect the bathroom from the appearance of mold in the near future.
If you regularly wash the tiles using such products, they will shine clean. By the way, you can also adopt some. The selected products not only remove dirt, but also provide disinfection, but do not forget about safety precautions when working with chemicals.
August 14, 2016Specialization: facade finishing, interior decoration, construction of cottages, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)
Plaque on the surface of the bathtub is an inevitable phenomenon that every housewife has to deal with. Getting rid of it is usually not difficult, however, this process must be approached competently, otherwise you risk getting rid of not only deposits of salts and minerals, but also plumbing. Therefore, in this article I will tell you how and how to clean old deposits from a bathtub and other surfaces using improvised means, so as not to spoil the plumbing.
Where does plaque come from?
I would like to note right away that it is almost impossible to prevent the appearance of plaque, since the main reason for its appearance is the evaporation of water, which interacts with soap. Is it true, tap water even by itself it leaves a residue, since it contains a large number of mechanical particles and salts.
After the water dries, all these minerals and other elements are deposited on the surface in the form of a gray coating. If the water is rich in iron, it can also color the surface in a characteristic Orange color . As a result, a snow-white bathroom is very short term turns into an unsightly container of a “gray-brown-raspberry” color.
Of course, after each use you can wipe the bathtub with a dry cloth. In this case, you will not see the plaque soon. However, it is impossible to keep track of all the drops that fall on the surface, so sooner or later you will still have to face the need to remove deposits.
Currently, there are many household chemicals on sale that effectively clean both types of plaque. However, most formulations are based on acids, as a result of which they are very toxic and can even cause burns if they come into contact with the skin. Powder products are more environmentally friendly, however, they scratch the surface of the plumbing fixtures, as a result of which it gradually loses its original attractive appearance.
Therefore, all kinds of “folk” remedies are very relevant in our time.
Methods for removing limescale
First of all, let's look at how to clean a bathtub from limescale deposits. To do this, you can use the following folk remedies:
Below I will tell you how to get rid of pollution in all these ways.
Method 1: table vinegar
The easiest way to clean the surface of plumbing fixtures is to use six percent table vinegar. You can use it as follows:
- pour undiluted vinegar into a container with a spray bottle, for example, left over from some cleaning product;
- then spray the vinegar onto the stained areas of the bathtub. For greater efficiency, you can “walk” the top with a brush, however, not very hard, so as not to scratch the coating;
- after this, the surface should be left for half an hour or even an hour. At the same time, make sure that the surface does not have time to dry out. As a rule, the composition must be applied every 15 minutes;
- after the specified time, you need to clean the surface with a brush;
- if necessary, the procedure should be repeated;
- At the end of the work, the plumbing must be rinsed with water.
This method can also be used for tiles. The only thing is, before you wash the tiles in the bathroom from plaque, wash it with soapy water to open access directly to the lime.
If plaque has accumulated in large quantities in the area near the drain hole, as often happens, plug the plug and pour a glass of vinegar into the bathtub, heated to a temperature of about 40 degrees. Leave the vinegar overnight, after which the stain will probably disappear.
Method 2: citric acid
Citric acid is a good alternative to vinegar. Its main advantage is the absence of an unpleasant odor. Cleaning the surface with citric acid is carried out as follows:
- Dissolve a tablespoon of citric acid in a glass of water. The granules must dissolve completely, otherwise you may scratch the surface of the bathtub;
- Using a sprayer or sponge, apply the solution to the contaminated areas and wait 10-15 minutes;
- After this time, dip the sponge into the solution again and use your hands to rub the contaminated areas with it. As a result, the surface will be cleaned before your eyes;
- Finally, the bath should be rinsed with water.
I must say that lemon acid removes well and soap scum. Therefore, you can “walk” over the entire bath with a sponge soaked in the solution.
Method 3: soda and washing powder
Another effective detergent can be made from the following ingredients:
This tool is used as follows:
- V hot water you should gradually add soda and powder;
- Now dip the sponge into the solution and treat the contaminated area with it. The composition should be left on the surface for 10-15 minutes;
- Now the dirt should be wiped off with the same sponge.
When choosing what to clean bathroom tiles from plaque, you can also choose this composition. It copes effectively with various types pollution on different surfaces and even mold.
Method 4: baking soda and vinegar
If you want to clean the surface of the bathtub from limescale quickly, efficiently and with minimal costs strength, then use soda and vinegar. Instructions for using these products look like this:
- First, rub the surface with a soda solution. To make it, dilute three tablespoons of soda in a glass of water;
- After that, apply vinegar to the surface. The plaque removal process will begin along with a chemical reaction, which is accompanied by the formation of foam and hissing;
- after half an hour, the treated surface should be rinsed with water;
- if necessary, repeat the procedure again.
As a rule, after the first or second time, the surface of the plumbing fixtures becomes perfectly white.
Method 5: ammonia
Ammonia cleans surfaces well from various contaminants to a “shine.” Therefore, it is “grandmother’s” favorite remedy.
Working with it is quite simple - soak a rag in ammonia and place it on the contaminated area. After an hour, rinse the surface with cold water.
When working with ammonia, ensure good ventilation of the room, as it has a sharp, unpleasant effect.
As an alternative to ammonia, you can use hydrogen peroxide. This composition destroys plaque as a result of the release of active oxygen during a chemical reaction.
Removing yellow plaque
So, we figured out how to clean the bathtub from lime deposits. Finally, I will tell you how and with what to wash yellow plaque. To do this, you can use the following tools:
Method 1: Borax and Lemon Juice
First of all, let's look at how to remove yellow plaque using borax and lemon juice, since this remedy has been tested for decades. It is applied as follows:
- prepare a paste of lemon juice and borax;
- apply the paste to the yellow area with a brush;
- let the paste dry;
- Now wash off the paste along with the rust with running water.
As a rule, rust goes away after the first application of the composition. However, if necessary, the procedure can be repeated.
Method 2: Homemade Paste Remedy
To make the paste you will need the following ingredients:
After mixing all the ingredients, they should be applied to rust stain no more than 30 minutes. After this time, the paste must be washed off with running water.
Method 3: trisodium phosphate and hydrogen peroxide
Trisodium phosphate is an excellent degreaser. It can be purchased at almost any hardware store. And if you add a little hydrogen peroxide to it, it does an excellent job of removing rust.
This composition is used as follows:
- Dilute four tablespoons of trisodium phosphate in three liters of water;
- after that, pour 50 g of hydrogen peroxide into the solution in small portions;
- then moisten the sponge in the resulting composition and wipe off the rusty stain with it;
- when the stain becomes barely noticeable, apply the product to it and leave for 10 minutes;
- after the specified time, rinse the treated area big amount water;
- repeat the procedure if necessary.
Method 4: oxalic acid
Quite simple and yet effective means is oxalic acid. It must be diluted with water in a ratio of 1:10 and applied to the contaminated area.
This tool is used as follows:
- Apply oxalic acid with a brush to the contaminated area;
- then leave the composition for three hours;
- After this, wipe the treated area with a sponge soaked in warm water.
Method 5: hydrogen peroxide with ammonia
Finally, let's look at how to clean a bathtub with hydrogen peroxide and ammonia. This is done as follows:
- in a clean container, mix 150 mg of ammonia and 50 mg of hydrogen peroxide;
- leave the solution for 10 minutes until the reaction is complete;
- now you need to moisten the sponge in the solution and apply it to the yellowed area;
- After 20 minutes, the product should be washed off with running water.
I must say that this method Versatile enough that it can also be used to remove limescale.
People are often interested in how to clean a mirror from plaque. Tooth powder, which is ground with a rag, is excellent for these purposes. You can clean glass ones in the same way.
Here, in fact, are all the ways to clean the bathtub from plaque that I wanted to tell you about.
Conclusion
Using the above bath cleaning methods, you can remove any type of deposits without damaging the surface. In addition, they provide some savings, since the price of all formulations is significantly lower than the cost of special products.
See the video in this article for more information. If any points in the article raise questions for you, ask them in the comments, and I will be happy to answer you.
August 14, 2016If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!
Gray stains on the surfaces of plumbing fixtures and tiles in the bathroom do not look very nice, and they are called limescale. Cleaning it causes a lot of difficulties and investments of effort, but knowing why it is formed, you can not waste time on cleansing, but prevent its appearance.
It is known that tap water, although intended for the household needs of the population, is saturated with various salts and lime. The presence of these elements is necessary in the composition of water, otherwise it will be dangerous to human health, such is the technology today. And the price of safety is limescale deposits on the surface of the tiles in the bathroom. The density of such a layer can be different, it all depends on the quality of the water - if it is too hard, then deposits appear very quickly and are difficult to remove. Soft water also forms plaque, but it is much easier to remove.
In any case, it is possible to wash the tiles in the bathroom from limescale. As soon as you see the first marks, start cleaning them. It is known that old stains on any surfaces and materials are more difficult to remove than fresh ones.
Chemical compositions against limescale
The stores offer a huge range of various industrial products. With their help, you can quickly clean deposits, remove old odors, and prevent the spread of bacteria. They also have a pleasant aroma of cleanliness and freshness.
Despite such a number of formulations, not all people are able to choose the right one for washing tiles, much less buy it. The price of narrowly targeted mixtures is not always affordable, therefore, in order to save money, they often purchase universal products that fight all types of formations, including fungal and rust. Using them, lime can also be removed from bathroom tiles.
But it is important to know that chlorine is not suitable for cleaning tiles, including limescale. It is ideal for cleaning the rim of the bathtub and its inner surface, but under its influence the tiles may become discolored or white stains may appear. Of course, it won’t be possible to wash them off. For this reason, chlorine-containing compounds are not suitable for all bathroom elements. It is important to choose products that are suitable specifically for removing plaque, otherwise you can get a lot of side effects.
It is also better not to use powders for these purposes, as they contain abrasive substances. Chemicals in liquid or cream form are preferable, and the most popular are the following:
- Mister Muscle;
- Cillit;
- Domestos;
- Comet and other analogues.
Try to wash off the resulting limescale as soon as you notice its appearance, using the above compounds.
Folk remedies for limescale
Before expanding capabilities chemical industry, housewives dealt with many problems with improvised means, so it will not be difficult to clean the tiles in the bathroom from plaque at home. Besides, folk remedies more economical, suitable for allergy sufferers chemical compositions, and are generally safer for human health.
Soap solution
To wash the tiles in the bathroom, and for maintenance in general, a simple soap solution is suitable. This method is ideal for those who have a lot of time, since it is recommended to wipe surfaces with this composition every other day, be sure to rinse it off with water and wipe it dry. This type of care takes at least half an hour, but if you do it regularly, you won’t be afraid of limescale deposits.
Vinegar
If limescale has formed, you can wash the tiles in the bathroom using table vinegar; it cleans the surfaces and has a disinfecting effect. This method has a drawback - the acids contained in vinegar can lead to the destruction of the seams between the tiles. Therefore, apply it to a cloth and wipe only the surface of the tile, being careful not to touch the seams. Hands must be protected with gloves, and after processing the tiles must be rinsed with water and wiped with a dry cloth.
Lemon acid
Citric acid will help remove limescale deposits that have formed on the tiles in the bathroom. You just need to use it carefully, as the crystals damage the surface. To avoid scratching the tile, dilute the acid in warm water - make a moderately liquid solution, about a tablespoon of water per 20-30 grams. acids. Afterwards, wipe all dirty areas and rinse them with water.
Ammonia
Ammonia helps restore the tiles' former shine and radiance - dilute a tablespoon in 2 liters of water, spray or apply the composition over the dirty area. After 5-10 minutes, rinse off, wipe the surfaces with a clean damp cloth, and finally wipe dry.
Choosing industrial products or people's councils, you should also pay attention to the brushes. Under no circumstances should you use metal mesh, although they quickly remove plaque. After using them, scratches remain. The preferred rag is a melamine sponge containing crystals that turn into foam under water pressure. Thanks to this, such sponges do not leave streaks and collect all the moisture, meaning you don’t have to wipe with a dry cloth at the end. It is allowed to use a toothbrush to clean the joints and get rid of layers of dirt on them.
Prevention
In practice, it has been proven that it is easier to prevent a problem than to solve it later. With limescale given wisdom also turns out to be true. Moreover, it is not difficult to organize preventive measures - to prevent plaque from becoming a decoration on the bathroom walls on tiles, it is enough to wash the surfaces 1-2 times a week. Use aggressive chemicals you don’t have to, even simple liquid soap. And the appearance of mineral deposits can be easily prevented by rubbing the areas with soda.
Make it a habit to wipe walls and taps with a dry cloth after taking a bath to prevent the formation of limescale and mold, which is even more difficult to combat.
Thus, timely and high-quality cleaning will save you from further unnecessary waste of time, money and effort. And the bathroom will shine and smell fragrant!
Tile is the best option bathroom wall decoration. It is very beautiful and comfortable, but no matter how wonderful it is, it still gets dirty, and therefore the question inevitably arises, how to clean the tiles in the bathroom from plaque? It is this type of pollution that even the most expensive and unpretentious examples of this finish cannot avoid. That is why information on how to clean tiles, as well as get rid of unpleasant plaque and white stains, is very relevant.
Mold and mildew - how to remove?
Cleaning bathroom tiles cannot be limited to just removing plaque. Another common problem is mildew and mildew. Let's look at options for cleaning mold from bathroom tiles.
To remove this dangerous pollution Only strong disinfectants should be used. In addition to purchased household chemicals special purpose, you can also use the following options.
Steam
To do this, you need a household steam cleaner, which supplies hot steam under very high pressure and thereby removes grease, mildew and mold, destroying spores and microbes.
Bleaching
Using bleach, you can remove mold from tiles in the bathroom in the same way as you can remove plaque from them. According to the instructions on the package, make a water solution and use a rag to wipe all surfaces.
Important! When using this product, use protective equipment (gloves, respirator), since active substance emits caustic vapors and has a very aggressive effect on the skin and mucous membranes.
Soda Ash
Soda ash is useful if very thorough cleaning of seams is required. Using powder and a brush, you need to clean all contaminated areas of the tile.
Changing grout
If conventional methods fail, you can resort to using more radical way. Clean out absolutely all old contaminated and fungal-infected grout from the seams, treat the joints with an antiseptic, and then re-seal them with a fresh mixture.
What is limescale?
Hard water, which contains very large amounts of calcium and magnesium salts, settles on various surfaces, forming limescale. In turn, it is completely removed only if acid-containing substances are used.
If you think that this kind of plaque will be easy to clean, you are deeply mistaken. Its traces can be removed from a glass surface quickly and without problems, but from a tile surface it is not so easy.
Let's really consider effective ways cleaning various surfaces against limescale, which are widely used in the bathroom
How to remove limescale from glass and plastic?
The following products can easily help you get rid of limescale from glass and plastic surfaces in the bathroom:
- a soap solution will remove all minor deposits without the slightest difficulty;
- and if the contamination is more severe, you need to use vinegar and citric acid.
From the experience of many users, it is known that limescale deposits on glass surfaces, such as shelves, mirrors and shower partitions, are much easier to clean than deposits on other surfaces. And systematic cleaning, which occurs at least every 1 day, will make you completely forget about such problems.
Important! Today, on the shelves of supermarkets, as well as ordinary hardware stores, you can easily find everything you need for the bathroom and any items in it, detergents. But be sure to remember that you need to give preference to paste and cream products, because they are the most gentle and at the same time no less effective in combating deposits in the form of limescale.
How to remove lime on tiles and ceramics?
If long time If you haven’t taken care of your bathroom tiles, it will soon stop pleasing you with its shine. This happens due to the deposition of limescale. In addition to this, black mold appears in the seams between the tiles, this mold you will have to clean thoroughly.
Eliminating limescale using household chemicals
Stores specializing in the sale of a variety of hygiene products, as well as household chemicals, have several options for products in their assortment. proper care behind the tiles.
The basic rules for choosing a suitable product for cleaning bathroom tiles from plaque are as follows:
- The best choice would be if you look at liquid or gel products.
- If you want to use cleaning powders, which are often more effective, keep in mind that they contain small abrasive particles. This structure can damage the entire surface of the tile.
- If the condition of the tiles has reached the point where corrosion has appeared or white coating, be sure to use a cleaning product that contains chlorine. Another huge advantage of this product is that it can create a disinfecting effect.
- If such a situation has occurred that you have a desire to tidy up the dirty tiles, and special means If you don’t have it on hand and you don’t plan to go to the store, use a glass cleaner. These products contain ammonia, which can restore dirty tiles to their long-lost shine.
What can be used to clean tile flooring, besides household chemicals?
Trends modern world are aimed at reducing the use of household chemicals in the home. This is justified by the fact that household chemicals It has Negative influence on environment, as well as the ecology of the Earth as a whole.
Important! Particularly sensitive people have various allergic reactions to the constituent substances contained in cleaning products, so their use in such a situation is strictly contraindicated.
Soap solution
The safest and easiest option for cleaning bathroom tiles from plaque is a soap solution. This universal remedy can only be used if your tiles have not yet turned white and receive regular and thorough care.
Vinegar
You can clean bathroom tiles at home using vinegar. When using such a product, the procedure is best performed using a sprayer.
Washing technique:
- Pour regular table vinegar into a spray bottle.
- Spray vinegar over the entire surface of the tiles and scrub the tiles with a brush. The brush must be soft and natural in color.
Important! You can wash tiles in this way quite quickly if you use 6% vinegar, but it is better not to use concentrated essence. If you only have 80% vinegar concentrate, be sure to dilute it with clean water in a ratio of 1 to 11.
If the tiles are a little more dirty than you expected:
- Leave the tile surface moistened with vinegar for a while. During this time, the vinegar will penetrate deeper into the layer of dirt and it will be easier to wash it off.
- Wash the tiles with warm and clean water.
- Wipe the surface with a dry cloth.
In order to clean tiles, microfiber cloths are best suited. You can purchase them at a special hardware store.
Important! Never forget about safety precautions when working with acid solutions.
Soda
Due to the versatility of this substance, it is most often preferred experienced housewives. Regular baking soda is best used on glossy tiles where the level of dirt is not too high.
Important! How to determine the degree of pollution? This is quite simple to do: if there are any small smudges or slight clouding of the tiles. But, if the plaque reaches a level where the thickness of the plaque is a millimeter or more, in such cases soda definitely cannot help you with this problem.
If we continue to talk about soda and its properties, it would not be amiss to add that this is one of the few abrasive agents that, when applied with a small amount of soap, is completely incapable of scratching the surface of the tile. This means that soda will remove the problem very gently and will not spoil the material.