Production of lysus in home. How to make lysuun at home

Lizun or "Hand Gum" is an unusual plastic toy, changing its shape, which can easily be made independently at home. How to do it? In our article you can learn a few simple ways Cooking Lizun.

Shampoo and Sol.

Make lizun from shampoo and salt is quite simple. To do this, you will need the following components:

• thick shampoo - 4-5 ch. l.;
• salt - 1 tsp.

In a small container, lay out shampoo and salt. Then mix thoroughly and remove in refrigerated Camera for 15-20 minutes. Such a "gum for hands" will somewhat different from the shopping option due to greater craving and stickiness.

multicolored lysuns

Hair spray

Hair varnishes have a special substance in their composition - polyvinyl acetate, which forms a film on the surface of the hair, due to which it turns out to be saved. From any lacquer for hair, you can easily make lysuine. Take:

• hair varnish - 20-25 injections;
• pVA glue - 95 g;
• gouache or acrylic paint - 1-2 drops.

In a bowl, pour the PVA glue and begin to injected hair polish, constantly stirring the mixture. After the future lysun begins to thicken, add a gouache or acrylic paint to give color. Continue to interfere with a homogeneous mass.

Plasticine

For the preparation of "manual chewing" from plasticine, such ingredients are needed:

• transparent glue - 250 ml;
• soft plasticine - 15-20 g;
• boiling water - 300 ml.

Take a small bowl. Put on it to half a teaspoon of the sodium tetractural and pour boiling water, mix thoroughly to completely dissolve the "boos". Give some time to cool the mixture. Prepare the second container for mixing plasticine and transparent glue to homogeneous mass. Then mix all the ingredients completely until the stickiness of the composition is disappeared. Such a lysun should be quite crazy.

PVA glue

Oddly enough, but PVA glue can help in such an interesting lessonlike the manufacture of lysun. Ingredients:

• pVA glue - 100 g;
• acrylic paint (any shade) - 1 tbsp.;
• water - 200 ml;
• contact Lens Liquid - 1 ChL.;
• food soda - 1 tbsp.

In a small plastic container, pour the PVA glue and stir it with water. We gradually add acrylic paint - in the end there should be a liquid uniformly shade. Now take another container and pour water into it and pour out the food soda - blend thoroughly until the sodium sodium is dissolved. The contents of two containers mix each other to form a thick mass.

elastic bright lysun of different colors

Sodium tetraborate

Sodium tetrabrate - this sodium salt boric acidwidespread in industrial production. Of this substance It is enough just to cook lysuine. The following ingredients are needed:

• cold water - 250 ml;
• pVA glue - 100 g;
• sodium tetrabrate (Bura) - ½ Ch.L.;
• gouache - 2 ch. l.;
• glycerin - 2-3 drops.

In a shallow bowl, pour water and glue PVA - mix thoroughly. Then add some guaishes (color at the discretion), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Put the mixture into the refrigerator for 15 minutes.

Shaving foam and plow glue

Lizun can be made even from an ordinary shaving foam. Take the following:

• shaving foam - 200 ml;
• pVA glue - 100 g;
• water - 200 ml;
• sodium tetrabrate - ½ CHL;
• gUASHEW Paints - 50 g

In a plate with high sideboards or a bowl, lay out the "boor" and pour water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA and paint glue. Mix all the ingredients again. As a result, it should be a soft lump, which will stick to the hands, so it is necessary to stop it in hand to get rid of stickiness, and then put for 10-15 minutes in the refrigeration chamber.

Starch

Making a "hand feed" yourself can also be as well as starch. Components:

• starch - 100 g;
• pVA glue - 100 g;
• water - ½ cup;
• food dye or acrylic paint -50 g.

In a shallow bowl, pour half a glass of water, pour the starch, thoroughly stirring it until completely dissolved. Then add food dye or acrylic paints (color optional). Give the resulting mixture a little cool by putting it in the refrigerator. Put starch to the bag or cellophane package and mix with PVA glue. How to shake the contents of the package before the formation of a homogeneous mass.

lizun with amazing consistency

Toothpaste

There are 2 ways to prepare lysuine based on toothpaste. Let's consider each of them in more detail.

On water

It is necessary to take the following ingredients:

• toothpaste - 100 g;
• water - 200 ml.

In the toss, squeeze the toothpaste. On medium fire in a small saucepan, boil water. We put a bowl with pasta on a water bath and prepare for 15-20 minutes. Do not forget to stir constantly. As a result of the above manipulations, a dry mixture should be turned out to be coated for a while. Lubricate hands olive oil And start kneading the weld. You will get a drum and elastic lysun.

In the microwave

For the manufacture of lysus in the microwave based on toothpaste, you will need:

• toothpaste - 100 g;
• cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze toothpaste into shallow dishes intended for microwave ovens. Put warmer in the microwave for 2-3 minutes. Then remove the plate, thoroughly mix the paste and again send it to warm another 3 minutes. As a result of all manipulations, you should get a dry mixture. Apply cosmetic oil for future lysun and how to disperse in your hands.

Dishwashing liquid

Make a "hand gum" from the detergent is very simple. Ingredients:

• dishwashing detergent - 100 ml;
• food soda - 2 tbsp.;
• hand cream - 1 tsp;
• acrylic paint - 1-2 drops.

In the container small size lay out detergent, then add some food soda, hands cream, as well as acrylic paint - mix the contents very carefully. The mixture should be sufficiently thick. Put the resulting mass into the refrigerator for 2-3 hours.

Flour

For the preparation of lysen based on flour, you need components:

• wheat flour - 100 g;
• hot water - 100 ml;
• cold water - 100 ml;
• acrylic paint - 1-2 drops.

Wheat flour seek with a sieve into a shallow container. Add to her first cold waterAnd then hot (in no case do not use steep boiling water) and dye. How to mix the contents of the dishes. Put the mixture into the fridge for 2-3 hours.

an example of making lysus

Air freshener

Make a "manual chewing" from the air freshener possible, but only with the help of additional components:

• pVA glue - 100 g;
• air freshener - 20-30 brenoes;
• sodium tetraborate - ½ tsp.

In a shallow dishes, pour PVA glue and add air freshener to it - mix thoroughly. Then pour the sodium tetraboate tea spoon and again everything should be mixed. Give the mixture obtained in the refrigeration chamber for 10 minutes.

Nail polish

As the main component of Lizun, an ordinary nail polish can be used. Take:

• nail polish - 3-4 drops;
• pVA glue - 100 g;
• water - 100 ml;
• sodium tetraborate - ½ tsp.

First, mix the cosmetic varnish and PVA glue. Then add some water and half a teaspoon of sodium tetraborate. Mix all the ingredients thoroughly. Place the mixture in the refrigerator for 10 minutes.

Gelatin

It is possible to prepare lysuer without using PVA glue. To do this, you will need:

• plasticine - 100 g;
• gelatin - 50 g;
• water is 100 ml.

Add gelatin to the water and stir until it is completely dissolved. Then let's stream within 1-2 hours. Boil on slow fire for 2-3 minutes. In a separate container, mix the plasticine with water and gelatin. How to break the mixture in the hands until the homogeneous mass is obtained.

Chocolate paste "Nutella"

Lizun made from chocolate paste "Nutella" is edible. It includes:

• paste "Nutella" - 4-5 tbsp.;
• marshmallow Marshmallow - 10-15 pcs.

Melt the marshmallow in the microwave oven. Add chocolate paste "Nutella" to it. Mix thoroughly - it will take enough time, but the result is worth it. By readiness you will be able to eat the obtained Lizen, happier on bread or cookies.

Candy "Fruxer"

For the preparation of edible lysuine, the following ingredients will be required:

• candy "Fruux" - 6-7 pieces;
• sugar powder - 100 g;
• water - 300 ml.

Melt candy on a water bath. Let cool. Add sugar powder and cut your mixture in your hands until it loses its stickiness.

Silicate glue

"Hand gum" from silicate adhesive will be completely transparent. For its manufacture, it is necessary:

• silicate glue - 100 g;
• water - 250 ml;
• sodium tetraborate - ½ tsp.

In a small bowl, pour 250 ml of water and add the sodium tetraborate - mix until the "borants" is completely dissolved. Then squeeze the silicate glue and blend all the components between them.

homemade lysun

Salt and soap

Let's wonder one more unusual recipe Making a homemade lizen. Take the following:

• liquid soap - 100 ml;
• salt - 1 tsp;
• acrylic paints or food dye - 1-2 drops.

Pour 100 ml of liquid soap into any container, then add salt and dye to it. Mix thoroughly. Put in the refrigerator for 15 minutes.

Metal chips

The recipe for the preparation of lysun made of metal chips is considered unique, as it is magnetic. Ingredients:

• metal chips - 100 g;
• pVA glue - 100 g;
• boric acid - 1 tsp

In shallow packaging, mix the iron chips, PVA glue and boric acid. Mind until the mass becomes sufficiently thick. Then take the magnet and bring to Lizuun - it should stretch out.

Polyvinyl alcohol

Polyvinyl alcohol or PVA is often used for the manufacture of lysus as a component that replaces PVA glue. Ingredients:

• polyvinyl alcohol - 3-4 tbsp ..
• "Bura" - 1 tsp;
• food dye or gouache - 1-2 drops;
• warm water - 200 ml;
• medical bandage - 30 cm.

Divide alcohol in water, and then boil on slow heat for 30 minutes. In a small bowl, dissolve the "boor" in the water, skip through the bandage to remove the extra liquid. Mix sodium tetraborate with PVA and gouache. Put in the plastic bag and remember your hands. Place the lysus in the refrigerator for 15 minutes.

Food soda and glycerin

Prepare the following ingredients:

• food soda - 100 g;
• glycerin - 2-3 drops;
• sodium tetrabrate - ½ CHL;
• pVA glue - 100 g;
• dye - 1-2 drops;
• water - 200 ml.

Preheat the water without bringing to a boil. Add sodium tetraborate to it, glycerin, PVA and dye glue. All of the above ingredients thoroughly mix before the formation of a homogeneous mass.

Hydrogen peroxide

For the manufacture of lizen on the basis of hydrogen peroxide, you will need:

• hydrogen peroxide - 1 tbsp.;
• pVA glue - 100 g;
• water -100 ml;
• dye - 1-2 drops;
• food soda - 100 g

Water

You will need the following components:

• water - 200 ml;
• food soda - 100 g;
• dye - 1-2 drops;
• soul gel - 2 tbsp.

Dissolve the food soda in the water. Add a pair of dye drops, as well as 2 tablespoons of the shower gel. Mix all the ingredients thoroughly. Put the resulting mass to stick into the refrigeration chamber for 20 minutes.

In a separate container, mix the food soda with water. Add dye and PVA glue - mix again. At the very end, pour hydrogen peroxide to give weight. Lizun will become foamed.

Glue stick

The following ingredients will be required:

• glue-pencil - 1 pc.;
• dye - 1-2 drops;
• sodium tetrabrate - ½ CHL;
• water is 100 ml.

Remove the glue from the plastic shell, put in special dishes Heat in a microwave oven for 2-3 minutes. Add a dye, water and sodium tetraborate to the glue - mix thoroughly. Put the resulting mass in the refrigerator for 5-10 minutes.

In our article you got acquainted with the most interesting and unique recipes Cooking toys-lysun at home. All of the above ingredients are safe subject to the rules for working with chemicals.

Ability to stick to hand and surfaces, change the form depending on the imagination, the lease toy has deserved great popularity in children. It leads them just in indescribable delight. And so today I decided to deal with the question: how to make lysun at home.

Lizun is the case when most adults relate to children's fun without much joy. But what - if you do if the kids are crazy about the copy of the cartoon hero from the sensational "ghost hunters"?

The answer is one - to understand and take the passion of the younger generation. And I remember your childhood, and help make lysuun at home.

Dear moms and dads, grandparents, let's try to celebrate positive sides Children's attachment to a sorty toy. This will undoubtedly make it more attractive for us.

First, Lizun is useful for kids, as the game with Him develops the motility of the hands, imagination. Adults, by the way, you can also massage your hands.

Secondly, additional appears free timeWhen a child is trying to hurt a naughty lysuine (whatever child does not take, just not crying).

Thirdly, they save funds in the manufacture of sought-after toy in an independent way. And finally, the most important thing is unforgettable minutes spent with the baby over the manufacture of a fascinating being in the cozy home setting.

After all, there is no greater happiness for both adults and children than an interesting communication for sharing.

Will create with your own hands and deliver joy to the baby will not be much difficult. The main thing is to have a desire and some materials at hand.

Let's start action, and be content with the invention of an unusual hero - a spreading, sprawling, running lysun.

The standard of lysun, let's call it classic, is made of PVA glue, the bora (it is the sodium tetrabott) and water. It is fast and easy, and the toy is wonderful: repulsted from all surfaces and elastic.

A sort of jumper remaining soft. You can even wash such a crawler, it is not afraid of moisture.

Sodium tetraborate can be purchased in pharmacies, in radiostovarov departments. Buy a solution of four percentage, can be used and powdered, which is divorced as follows - on 1 tbsp. Spoon of half a cup of water.

Preparing a set of components:

• PVA glue - one hundred grams (white), with a suitable use
• Sodium Tetraborate (Blockchik)
• Dyes to choose from - in the form of gouache, green, acrylic paints, food dyes
• Dishes with more than half of the liter
• Wooden stick for stirring.

We manufacture children's fun

The toy is ready for battle. She is just like shop. No, even better - after all, it is created by the hands of caring parents on the joy of the child!

It is worth adding some comments in order for lysun the original, and for a long time Served happy baby.

1. It is necessary to keep lysun in a box that is tightly closed with a lid.
2. Leave a toy in the sun, or near heating devices Not recommended.
3. It is not desirable to have a created lysuine on a dilated surfaces (carpets, clothes), which will spoil a smooth and even toy, and our baby will be upset.
4. The high-end creation rainfall will give droplets of essential oils. Charming aroma Will be joy to children.
5. Do not regret the cosmetic brilliance - Lizun will become charming, even somewhat glamorous from their small quantity.
6. Drip to a slightly vinegar solution - lysun will become more plastic and drum. And the paint will not stay in hand.
7. A small number of glycerin droplets will allow the self-apelle on the prototype of the cartoon - it will become slippery.
8. Added hydrogen peroxide will turn the crawl into a light and air substance.

What do the home conditions imply? The presence of constituents that are always at hand. Such materials are the food soda and PVA glue. Total, and how many joyful children's screech in response!

Collect the toy set:

• PVA glue - 50 gr.
• Soda - one table tank
• Food dye - there is good, no - you can do the perfectly and without it
• Plastic Capacity - 2 pcs.
• Wooden stick for stirring
• Rubber gloves
• Half 1 tbsp. Waters (necessarily warm).

Phased creative manufacturer of lysun in a homely atmosphere:

Total business - and lysun ready!

It should only be noted that lysun from glue and soda is not very durable. They may be played not more than four days. But this has its advantages - you can cook fresh, which will be different with cleanliness and sterility.

There was no tetraborate, and the child wants a lysuncher similar to the store? No problem, make. For these purposes, finding liquid starch (applied when washing) and PVA glue. Lizun will be as needed - pull and vague.

We will be useful:

• PVA glue - a quarter of the vial (non-phase)
• Liquid starch is a third of the vial (you can breed an ordinary starch with water, with proportions one to one)
• Dye - what is your hand
• Package for mixing components.

Production:

1. Determine the liquid starch in the package.
2. Add a little dye.
3. Send glue.
4. Stir the mixture - you can even hand.
5. Make sure that the mass becomes homogeneous, at the same time, make sure of the color. Little color - add paints to the desired effect.
6. Send the package in a cold place for three to four hours.

The clock was flying - lysun ready for fun games. It turned out perfect! The child will be delighted. What else is needed for happiness?

One of the environmentally friendly methods for creating baby fun is from ordinary water with the addition of starch. Lizun comes out wonderful, it is not scary to give his beloved chad.

For crafts from the water you will need:

• Starch
• Water (necessarily warm)

The components are taken in the proportion of one to one.

The manufacturing process is very simple as a set of components: water is mixed with starch, a ball is formed. Homemade is ready.

Optionally, it is possible to add dye, sequined, essential oil. This greatly embellish homemade miracle - Yudo.

This is the easiest way to create lysus. It comes out very reliable, which the kids are immensely rejoice.

For creativity needed:

• Glue called "Titan" - 90 gr. It is better to choose exactly the same, and certainly with a suitable use
• Shampoo - 30 gr. Anyone is useful, even the most inexpensive
• Any dye. View of the dye depends on what coloring you want to give homemade fidget
• Gloves
• Plastic bag.

Step-by-step creative process

1. The bag poured shampoo and glue, mixed.
2. The dye is added, mixed.

Ready! Just and quickly.

For such a technique, advice will be useful:

1. The dye can not add if the shampoo was color. Or add quite a bit, to enhance the color effect. This is your decision.
2. Proportions can be varied: if you pour more shampoo - a large elasticity is achieved. More glue - It will be distinguished by density.

Make lysun possible from different materials. The easiest option is plasticine and gelatin. Surely they will find out in each house where little children grow.

Such a toy will be useful for babies, it will allow them to develop their handles, it can be given the most diverse shape. In addition to motility, the toy is developing and child thinking, fantasy.

For work, a wooden blade and container will be required in the number of two pieces. Metal, for dissolving gelatin, and plastic - for mixing.

For creativity you need:

• About one hundred gr. Plasticine of any colors
• A couple of 25 gram packs gelatin
• Warm water to 50 ml

Manufacture

1. Take metal container, Increase gelatin according to the instructions on the package, retain for swelling (approximately one hour).
2. Capacity with soluble gelatin put on fire, bring to
   Boil, retain for cooling.
3. Plasticine frowned hands well.
4. Take the container, pour there warm water, Plasticize plasticine.
5. Stir the spatula to homogeneity.
6. Cooled gelatin Send to Plasticine. Mix well, the mixture should become homogeneous.
7. Send to a cold place to froze.

Only flour and water. This option of homemade lizun can be given even to the very small family member. It will undoubtedly be interested in amenable to the touch of fun.

To create the simplest lysun is necessary:

• Two st. flour
• Water - Cold and Hot
• Dye - at will.

Production:

1. Flour fall asleep into the container.
2. Add a quarter cup of cold water, stir. Here to lay a dye, if you expressed a desire.
3. Pour hot water In such a quantity so that the mass becomes sticky.
4. Mass cooled over 1 hour.
5. Spit good hands.

Lysunchik ready. Can be commissioned.

From the shaving foam, the Lizunchik is very elastic, this fact really likes the kids. And he is very big - how many games can you come up with!

For its invention, you need to prepare materials:

• Shaving foam
• PVA glue
• Bura (sodium tetrabrate) powder - 1.5 ppm
• Warm water - 50 ml
• Comfortable capacity
• Shovel.

The creative process is the following steps:

1. First you need to dissolve the powder of the bora. For which in a separate container, dissolve it in warm water, we stir good - the powder crystals should not be observed.
2. Foam is extruded in the prepared capacity.
3. Adhesive is added, it is stirred.
4. We add two spoons of the dissolved powder to mass, mix. Mass dense.
5. We add another solution, mix.
6. The solution is added until the mass begins to fall behind the walls of the tank.
7. Another product readiness criterion - the mass does not stick to the hands.

Toy is ready. It is exactly what is sold in the store.

White foam causes the corresponding color of the product. You can browse all sorts of paints, and get a color toy. And if you make a lease from the buttons or paper, it will be charming.

And you can also paint the lizen from the foam into all the colors of the rainbow. The original toy will be the subject of pride and for the child, and for the creator. To do this, you need to prepare several additional containers and do the following operations:

Exclusive fun is ready. From it you can sculpt anything!
Well, dear adults, did we convince you that Lizun is an interesting thing? That making it with your own hands exciting and fascinating process? .. Moreover, this is another opportunity to plunge into the children's world of your child, another binding thread. So let's say Thanks to Lizuun!

Lisun or slim (from the English. Slime) is a toy having a viscous jelly-shaped shape that resembles a nengetone fluid. It has two main components of the polymer and thickener initially they performed polysaccharide or guar gum and a bora. This is such a toy that it is not necessary to purchase in the store as there are many ways to make it at home from the undergraduate ingredients. There is at least 22 recipe this type Toys.

Methods for creating this toy set. But since this is a toy, it is worth not to forget about safety measures in its manufacture, as well as while playing with it.

From shampoo and salt

One please simple methods It will require:

• Shampoo;
• Salt.

1. Take about 4 spoons of shampoo in it a little pour salt.
2. After each addition of salt, thorough mixing is required.
3. So repeats until the mixture does not become a tight.
4. After that, the resulting mass to put in the refrigerator.

From plasticine

Children will like the game, as well as the process of creating a plasticine slide itself.

Ingredients:

• 1 package gelatin;
• A piece of plasticine;
• Water.

1. In cold water, gelatin is sprinkled.
2. The correct proportion is indicated in the instructions on the package with gelatin.
3. After an hour's hour, the saucepan is transferred to the slab until the mixture of gelatin does not boil.
4. While the gelatin is preparing, it is necessary to stretch a piece of plasticine.
5. 50 g of water is poured into the tank of plastic and plasticine is placed.
6. Everything is thoroughly mixed until uniformity.
7. When gelatin has a little cooled it must be pouring into a container with plasticine.
8. Mix everything well.
9. As soon as everything cooled with a toy you can play.

From soap and salt

The recipe is very similar to the creation of lysun from a shampoo with salt.

But there is a difference in the composition:

• Liquid soap;
• Salt;
• Soda.

1. Soda with soda is gradually added to the soap.
2. Mixing.
3. So repeats several times before the formation of a homogeneous tight mass.
4. The end is the mass exposure in the cold.

Foam for shaving

In order to make a slide from a shaving foam, you will need:

• Tube with plow glue;
• Shaving foam.

1. Plate is filled with glue.
2. It is a little injected with a little foam.
3. Everything is smelted.
4. Foam joins before the appearance of the appearance of the correct consistency mass.
5. All lysun is ready, but if not satisfied with it white colorYou can add a couple of drops of coloring substance. If you add not one, but, for example, two colors, then Lizun will gain marble pattern.

From flour

The slide derived from flour is the safest recipe toy. It is allowed to play with even young children, especially if the dye performs substances of natural origin. The use of a natural dye will only affect the degree of staining towards less intensity.

Components:

• Flour;
• Hot water;
• Dye;
• Apron.

Sequence:

1. To sifted through a sieve 2 cups of flour poured ¼ part of a glass of glass Cold water.
2. Next is added ¼ part of the glass of glass hot water (not boiling).
3. Requires thorough mixing to full uniformity.
4. This is added if desired, the dye, the edible dye is better added more.
5. Mix thoroughly before forming a sticky consistency.
6. Lizun along with a capacity in which it was preparing, is placed in the refrigerator at least 2 hours.
7. When the mixture completely cooled with it you can play.

From nail polish

1 way

Perhaps such a recipe will not meet the child's expectations, but you can experiment. This requires:

• Sunflower oil - about 100 ml;
• Nail varnish jar.

In a bowl with an oil, pour the lacquer, mix until the entire dye from the varnish does not take one ball. This will mean that Lizun is ready.

Such a lysun is small, poorly smelling, a little fat.

2 way

• Varnish 1 jar;
• Water;
• Tube glue PVA;
• Sodium tetrabrate.

Progress:

1. The glue with varnish in the container is connected.
2. Mixed.
3. Gradually added water 1x1.
4. The tetraborate is introduced.
5. Stirring does not stop until the complete formation of a homogeneous mass.

From the glue of PVA and the adhesive of the pencil

Glue pencil with PVA glue in structure is very similar. Difference only on consistency, form. If there is no PVA, but there is a pencil glue, then it is no worse. Presence:

• Glue stick;
• Food or other dye - 1-2 drops;
• Bora.

Progress:

1. Pencil glue gets from a tube.
2. It is placed in a bowl in a microwave to its melted state.
3. You can add the coloring substance.
4. In the glass, water with sodium tetraborate is mixed.
5. Gradually stirring an aqueous solution is injected.
6. If the lysun does not turn out due to the fact that the mass is very liquid, then you need to add a tetraborate.

Edible version of Lizun

In order to create edible lysuine, it will be necessary:

• Packing of chewing candies (fruttella or mamba);
• Powder sugar;
• Capacities for water bath.

Cooking process:

1. Candy folded into the container and put on a water bath.
2. Until they become completely melted, stirring all the time.
3. A little cooled mixture is shifted into a bowl with sugar powder.
4. The mixture is collapsed in it, well smelted.
5. You need to wash the mass until it becomes easy to dig away.
6. You can even play with her even a small child.

From food soda

Lisun made according to this recipe is not safe for young children due to the fact that it contains a detergent for dishes. Playing with such a toy can be only under the supervision of an adult. Be sure after the game with her hands wash.

• Dishwashing liquid;
• Soda;
• Water;
• Dye.

Parentality of actions:

1. The liquid detergent for the dishes is poured into the appropriate capacity.
2. Gradually falls asleep and stirred soda.
3. With a very thick consistency, you need to add water and mix.
4. You can add a dye.

Creating a magnetic lizun

In order to reflect the lysuine, which will react to the effects of the magnet, that is, magnetic lysun.

Requires:

• Bora;
• Water;
• Glue;
• Iron oxide or metal sawdust;
• Magnet.

The process itself occurs, so:

1. A 0.5 teaspoon of borsa is suited to a glass of water.
2. Stirred until complete dissolution. It will act as an activator.
3. 0.5 glasses of water with 30 g of glue poured into another bowl.
4. Stirred to homogeneity.
5. You can add a dye, paint. In order for lysun to light in the dark, you can add phosphoric paint.
6. A solution of an activator from the first glass is added to the resulting mixture of a small flowing.
7. You need to pour gradually, stirring all the time.
8. If the mixture begins to acquire the desired consistency, it is necessary to harde the addition of the activator.
9. Lisun ready.
10. Lisun needs to get from the bowl, racing on the plane of the table.
11. On his middle you need to pour iron oxide.
12. Mix everything thoroughly until the color homogeneity.
13. Magnetic lysun made. It is possible to check its interaction with the magnet of the magnet, moving the magnet from the mass of lysen. Mass should be drawn behind the magnet.

Creating a sparkling type

• Hot water - o, 5 l;
• Powder Alcohol Polyvinyl - 1 tbsp. the spoon;
• Bura - 0.5 h. Spoons;
• Sequins (gliter) - 1 h. Spoon.

Procedure:

1. Pour 0.5 liters of hot water in a bowl.
2. Pour polyvinyl alcohol powder.
3. In another container, pour boron and pour to dissolve hot water.
4. The contents of tanks are whipped and connected.
5. In order for lysun to flood, you need to add sparkles, mix well.
6. All is ready.

From hand cream

You only need two ingredients of whose proportions should be seized experimentally. It may be similar to plasticine.

• Cream for hands can be seen several types;
• Flour.

Fashion description:

1. Flour mixes with cream.
2. Prevents full coagulation.
3. In the process you can add cream.

From the sodium and glue tetrabrate

The fastest way

• PVA glue;
• Tetraborate;
• Mellenka solution.

Creation process:

1. The tar is poured with a tube glue.
2. Drop of the greenstone is dripping.
3. Mixed.
4. A little tetraborate is added.
5. Mixed.
6. If the denothes are not enough, you can still add a tetrobrata.
7. Mixed or warm in cellofan package Before the moment it can easily be removed from the package.

No sodium tetraborate

One of the most successful, as well as simple methods.

Ingredients:

• PVA glue - 1 tube;
• Capsule two - component or three - component gel for washing - 2 pieces.

The manufacturing process consists of 3 stages:

1. Glue pour into the container from the blender.
2. There you also pour gel from the capsules.
3. To beat well.
4. Leave to appease for 15 minutes.
5. You can get and play.

Without glue plow

One of these methods is using toothpaste.

• Toothpaste;
• Salt;
• Shampoo;
• Sodium tetrabrate.

Work plan:

1. Mix pasta, shampoo and slight salt.
2. Mix.
3. To add sodium tetraborate drops stirring several times.
4. Cool.

Without starch

Two of many ways to create a slide without starch.

1 way

Need elements:

• Water;
• Guar gum;
• Baking soda;
• A solution for lenses;
• Dye.

Sequencing:

1. In a pouring water through a sieve, a guar gum is sifted.
2. Everything is stirred. The size of the lizen is dependent on the amount of water.
3. Strain the resulting liquid through a sieve over another capacity is not allowed to have lumps.
4. The liquid is painted with dye.
5. Lens is added for the lenses of about 2 tablespoons.
6. Soda is added approximately 2-3 spoons.
7. Everything is mixed about 5-7 minutes.
8. You can play.

2 way

Requires:

• 1 cup flour;
• 2 glasses of water.

Sequencing:

1. Water and flour are mixed.
2. The mass is divided into 3 parts, each of which is painted by its color.
3. It is necessary to warm up one of the ways: in the microwave minute on average power; in a frying pan with constant stirring on medium heat; In the oven for 15 min 160.
4. After cooling, Lizun begins to lose its own qualities.

Without water

Required:

• Jelly shower gel;
• Dye;
• Flour.

Actions:

1. A dye is added to the gel, flour is gradually introduced.
2. If no thickening occurs, it is worth adding flour.
3. Necessarily good thorough mixing.

From toothpaste

Also, the method is not complicated, but the proportions need to be selected experimented.

1 way

Ingredient composition includes:

• Helium toothpaste 1 tube;
• Glue 1 tube;
• Perfume composition (optional).

Stages of creation:

1. Squeeze the paste into the container.
2. Sleep well add glue.
3. Mix up to the formation of the necessary gauge.
4. To remove the smell of paste need to add a drop of a perfume composition.

2 way

• Toothpaste - 100 g;
• Polymer glue - 40 g.

Progress:

1. Mix pasta and glue.
2. Mix well, even beat to the formation of bubbles.

From sugar

A recipe in which you need to experiment with proportions.

• Sugar or sugar powder - from 1 tsp;
• Liquid soap;
• Shampoo.

Method for creating:

1. Shampoo and soap mixed in equal amounts.
2. Sugar is added, and better sugar powder (due to lack of sugar powder can be very liquid).
3. Mixed.
4. Leaves for 2 hours.
5. For 30 minutes in the freezer.

Very easy way to prepare glass lysuine

It is necessary to have very simple components such as:

• Cold water 1 cup;
• Spoon borants;
• Clay stationery (silicate).

Procedure:

1. A boome is added to the water and stirred until complete dissolution.
2. In the resulting liquid is introduced gradually glue.
3. Mixed.
4. Let it stand.

Option of airlum

This lysun is also called phlaffic slim.

He is preparing from:

• Shaving foam;
• Silicate adhesive;
• Liquid soap;
• Sunflower oil;
• Sodium tetrabrate;
• Dye and sequin (if desired).

In the following way:

1. A shaving foam is added to the glue.
2. Mixed.
3. Soap, oil, 0.5 spoons of bors are added to the resulting mass.
4. Mixed.
5. Mixed with hands until complete readiness.

How to make boric acid

Since the cost of boric acid is not big and the recipe is quite budget.

• Boric acid;
• Dye;
• PVA glue.

Process of creation:

1. The amount of nylby glue will determine the magnitude of the future lysuine.
2. The dyeing substance is added and is stirred.
3. Boric acid is added to droplets, stirring.
4. For a better distribution of all components, lysun is required.

What to do if the lysun does not work

There are cases when self-preparation of lysun does not give a necessary result. It is important to understand that the following factors affect the final result:

• The quality of the materials used;
• Compliance with proportions;
• Step Action.

If the lysun turned out, its mass will be homogeneous, one and easily suitable from the tank.

If the lysun turned out not homogeneous, it is possible to save it, continuing to actively knead until it gains the necessary drig, uniformity.

If the lysun is very sticky and stretches behind a spoon like a thread of a web, then you can try to add a little liquid starch or water depending on the recipe. It will give a consistency.

But if there is a crash, but Lizun just clench from the hands, without sticking to them, it means that there is an excessive liquid content. In order for it to get rid of it, these excess is to merge, but you can add the binding substance necessary for the recipe (glue, a solution of bonds, flour). Stir everything well.

How to save Lizun longer or correct lease care.

So what includes correct care for lysun.

To do this, you need to get:

• nutrition;
• domich;
• bath;
• highlight him a place under the game with him;
• place in the refrigerator.

Power includes two main salt, water, as well as an additional component of the eraser pieces (optional).

The diet for the day is from 1 to 5 pinch salts. It takes a slightly closed with water to the bottom of the jar for storage. After that everything is necessary to close well, shake. You can add elasty pieces.

The lizen house is a tightly closing jar.

Lizun can get pregnant to look like this will be like the appearance of small bubbles throughout the lysuine. If this happened, it is worth leasing to remove into the jar and leave for 4 days. Upon expiration of this time, check if a small color stainSo the baby "was born". It must be separated by placing in another jar.

Bathing necessarily for this in a bowl with a small amount of water should be washed with lysen after which it must be removed into the house.

Frequent games are not desirable, because because of its structure, he absorbs his all the surrounding dirt, dust. And this reduces its size.

Slime - the happiness of children of the 90s of the last century and the nightmare of their parents. The name "Lizun" got the toy after the release of the film "Hunters for Ghosts", where one of the characters wore this name. Little voracious casting joined everything that he met on his way, at speeds broke into a cake about all sorts of obstacles and adored towelingly to kiss. For similarity with this screen character toy and loved children. And now, many of them are purchased by lysuns in stores, and those who have anxious and inspector are made independently at home.

What is this strange toy

If you will see on sale a plastic jar or a container filled with a jelly-like substance with the inscription "Slum" or "Lizun" on the package, then it is she. Understand what it is, you can only take the slot in your hands. He is soft to the touch, things well and stretched, sticks to the walls, and then slides from them, often leaving fat stains.

Left alone, the slide spreads over the surface of the puddle, but it is easy to gather in a lump. It can stick to his hands, flow through your fingers, but becomes elastic when hitting the wall.

Initially, the slide was made from a guar gum - polysaccharide, and sodium tetrabrate, more known as a bora. As a result, a mucus similar to a mucus was obtained, but with the properties of the Nengeton fluid. It does not spread, it is easy to assemble, and when you hit it.

There are many types of lysunov, here are some of them:

Slime. The mass similar to Kisel is usually transparent. Will not stick to the hands, flowing through the fingers with long threads, spreads solid surface in a puddle.

Mucus is characterized by soft and drig

Antistress. This is a mucus placed in an elastic shell, covered with a cellular mesh. Under pressure forms bubbles.

Lizun "Antistussus" well relieves nervous tension

Gum for hands. More dense elastic mass. It is easy to mive and stretch.

Hand baby chewing is distinguished by greater density and elasticity.

Pumpman. The most dense lysun. It is less elastic, but elastic. Bounces on hard surfaces.

Elastic jumpschik bounces well from hard surfaces

Phlaffic slim. Fluffy and very pleasant to the touch. It is good, stretched.

Phlaffy Slym - the most magnificent and air lysun

Plasticine. Better maintains the form. Due to the plasticity, you can sculpt various figures from it.

Plasticine is better than others keeps the form

There are lysons that are well sticking to surfaces, matte, transparent, with foam balls, pearl, glowing, different colors.

Of course, such a toy can be bought in the store, but more interesting to make yourself from the remedies. Moreover, it is completely simple.

How to make different types of lysunov at home

What industry manufactures modern lysunov - it is not known for certain, but that when using sodium tetraborate with homemade manufacture The substance is obtained very similar to the purchase toy - a fact. From this recipe and start.

From the sodium tetrabrate and glue PVA

Prepare all ingredients:

Now it can be taken in the hands, pull, arid, throw and collect again - Lizun is ready.

Tip! Choosing the dye remember that some of them are packing hands.

With hair foam or shaving

The phlaffic slim is manufactured by the same recipe. To give lizenum of fluffiness, the hair foam or shaving is introduced into the composition.

1. Pour glue into suitable dishes.
2. Attach the foam to it. The amount depends on how empty the mass should turn out. Stir.
3. Add dye, you can use aniline or any other. Stir again thoroughly.
4. We gradually pour sodium tetrabott into the mixture, simultaneously stirring. As soon as the composition thickens and starts falling back from the walls of the dishes, you can take it in the hands and play.

The main condition for success in the manufacture of this species - good glue. If he does not thicken, all the works will go to the pump, nothing will work.

From the glue of PVA and soda

But not only a bora is used as a thickener. This feature perfectly performs food soda.

1. Dissolve soda in a small amount of water.
2. Glue pour into a bowl, add a dye and mix.
3. We gradually add a soda solution, simultaneously stirring thoroughly. Wait for the mass thickens. It does not happen immediately, so do not rush to add a soda solution.
4. Through the ready mass to frow in your hands. It will still be softer and tender than the previous one, it's good and stretches.

Lizun can be done flickering if you add glitter

From alcohol and silicate glue

Used for the manufacture of lysus and silicate glue. But the properties of the toy will be different.

1. Pour glue into a bowl and give the color to any dye.
2. Stirring the circular movements, add a little alcohol. You will see how the mass is thick, forming tight lumps.
3. Leave the substance for 20 minutes to relax.
4. Collect in a lump and frolick well. Such a lysun will not stretch and stick, the consistency is rather dense. But from it will be a great jump.
5. Skate the ground into the ball and try to hit them about the floor. Elastic ball goes well from hard surfaces.

From starch and hydrogen peroxide

A solid ballproof is simply made using ordinary starch. To do this, you will not need a lot of costs, the toy will cost a penny.

1. 100 g of starch mix with 200 ml of hot water to obtaining a jelly-shaped mass.
2. Let it be cooled and connect with 100 ml of PVA glue.
3. Add a suitable dye and a few drops of hydrogen peroxide. Mix everything well. Hydrogen peroxide will give toy ease and airiness.
4. Scatter the resulting mass into the ball. Pumpman ready.

Video Type for the manufacture of lizunov from glue

From the glue "Titan" and shampoo

A simple way to manufacture lysuine - with titanium glue. This glue is not toxic, and after drying it does not lose elasticity.

1. Mix glue with shampoo in a 3: 2 ratio. The color and transparency of the toy will depend on the shampoo. For greater color intensity, add a dye.
2. Leave the mixture for a while for thickening, usually takes 5 minutes.
3. Lisun ready. Just and quickly.

According to this recipe, it is not always possible to get the desired result, different shampoos behave differently. But trying to try, because you do not lose anything.

Tip! Stir the mass until it falls back from the walls of the dishes and will not stop sticking towards the hands. These are signs of readiness toys.

From glue pencil

Another type of glue is a pencil, too, quite apply for this purpose. Here we will again need sodium tetraborate.

1. To do this, you will need 4 pieces of glue pencil. Remove the rods and fold into refractory dishes.
2. With the help of the microwave or oven, melts the rods to form a viscous mass.
3. Add a dye to adhesive mass, mix.
4. In a separate dish, dissolve the boor in a small amount of water.
5. Little to add a solution into glue with constant stirring, until the required consistency is obtained.

Two video sections of cooking lysuine

From plasticine

Lizuuna can be made not only of glue. A good and durable toy is made of plasticine.

You will need:

• plasticine - 100 g;
• gelatin - 15 g;
• water - 250 ml.

1. Soak gelatin in 200 ml of cold water using refractory dishes.
2. When gelatin will swell, bring it to a boil with slow heat and immediately remove from the fire. Give a little cool.
3. Front plasticine so that it becomes soft. Mix with the remaining water.
4. Connect the warm gelatin with plasticine, mix well before receiving a homogeneous mass.
5. Place in the refrigerator for half an hour.

You can give such a toy without fears to give children, because there are no harmful substances in its composition. There is a small problem: this species leaves fat stains on the wallpaper. Watch that the children do not throw it into the walls.

From toothpaste and liquid soap

It is a safe option - lysun from toothpaste. You can use the usual and gel paste.

1. Mix 20 ml of toothpaste and liquid soap with 5th teaspoons of flour.
2. Stir so that there is no lumps first with a spoon, and then with your hands. So that the mass does not stick to the hands, moisten them with water and disarm well again.

From soap and shampoo

For the next species, you will need only two ingredients that will be found in any house. This is a liquid soap and hair shampoo.

1. Mix the liquid soap and shampoo in the same proportions to a homogeneous mass.
2. Place the refrigerator for a day.
3. Remove and have fun.

Since this lysun consists of substances soluble in water, protect it from moisture. From heat hand toy quickly softens, it is necessary to store it in the refrigerator. And do not allow contact with dust and mud, laundering the lysun will not succeed. With careful terms, such a toy will serve about a month.

From cream for hands and spirits

Make lizena can be made even from hand cream. No guarantee that the toy succeeds, but it's worth trying.

1. Squeeze the cream into a bowl.
2. Add paint and mix.
3. Little by adding perfume, mix everything thoroughly. The mixture will begin to thicken.
4. Having achieved the desired consistency, break the toy with your hands.

From flour

Often parents fear to give the slide to small children from the fear that they pull him in her mouth. For such a case, you can make a completely safe, edible lysuine without chemistry.

To do this, you will need:

• flour - 400 g;
• cold water - 50 ml;
• water hot - 50 ml;
• food coloring.

1. Squake flour into a bowl, mix with a dry dye.
2. Add Cold Water, mix again.
3. Pour hot water, perfectly squeeze the resulting dough. It should be smooth and without lumps.
4. Remove the dough for several hours in the refrigerator.
5. Once again, fright well.

Not all products and substances are suitable for the manufacture of slide. Not everything that seems like Lizun, has necessary properties. In order not to make mistakes, look at the video.

Video experiments on the preparation of lysunov from different ingredients

How to give lysuin the desired properties

Even if the slider turned out to be not as much as I wanted to fix it.

1. Vinegar will make a toy more elastic. Pour a few drops and lysun will be better reaching.
2. By adding hydrogen peroxide, you will get a magnificent mass, the phlaffic slim is manufactured so.
3. Making a toy slippery a few drops of glycerin will help.
4. Luminous lysun can be obtained using fluorescent paint.
5. If the lysun is too soft, put it in a jar, put several salt crystals there, close the lid tightly and leave overnight. Salt pull out excess water And the toy will return elasticity.
6. Too hard lysun will be softer, if you put it on the night in the container and pour a few drops of water.
7. To the toy nice smelled, flavory it essential oil, food flavoring or vanilla.
8. Magnetic lysun can be done by adding small metal sawdust or iron oxide to it. Made a good toy so that the supplement is evenly distributed. And then your lysun, like alive, will reach for any magnet.
9. The toy "Antistress" will work out if you put the mucus in the balloon. You can do this with a large syringe without a needle.
10. To increase lysuine, place it for 3 hours in water tank. Do not be afraid if it decreases into parts, it should be. Add a little salt and cream to hand. Stir. The slider will not only restore elasticity, but will become more.

Tip! Add multicolored to soft lysun foam balls. It will make it colorful and increase in volume.

Storage and Care Rules

Lizun - a toy capricious and life lifetime. To extend it, you need to know how to store and care for the slide.

1. Lizun B is stored plastic container with a tightly closed lid.
2. So that the slide is not drying, keep it away from heat sources, do not leave in the sun.
3. Furious lysun can be revived by water droplet, splashing - salt.
4. With lysun you need to play. Long storage May lead to the appearance of mold. Such a toy will have to throw out.
5. Frequent use will result in rapid pollution of toys and loss of properties.
6. Avoid contact with darous surfaces, Lizun will collect the hairs and come into disrepair.

Lizuuna is not just a children's toy, some species have and practical use. For example, they can be cleaned with a computer keyboard or clothing from the nagwed Sora. Elastic develop small motor, increase the strength of the fingers. Yes, and just calm, remove stress and give good mood. Make lysunov and play, because it's so exciting!

Lizun is a funny children's toy. A sticky miracle is easily glued to a solid surface and takes a variety of forms. The content of sodium tetraborate in a toy is alarming parents and in her purchase children refuse. Try to make lysuna with your own hands without harmful substance, a safe toy will delight the baby and bring him pleasure from the game.

Make lizena from glue and starch without sodium tetraborate

Prepare:

• starch. With liquid starch, water is not required;
• half of the glass of water;
• a few droplets of gouache or food dye;
• enamelned peak;
• spoon or wand;
• polyethylene bag;
• 100 g of glue PVA.

Pour warm water into the ass and carefully fall asleep starch. Do not stop with a spoon. Starch fall asleep so much so that the mixture is thick, but without lumps and not solid. Add the dye and wait for the cooling of the mixture to room temperature.

The mixture is put into the bag and add glue. So that the components are well mixed - shake the bag. Shake until you get a viscous homogeneous mass. Carefully drain excess liquid. Store the finished toy in a container with a dense lid, otherwise it dries. If he is dried - put in warm water for 5 minutes, and sticky lumps will become like new.

Making lysuan from sodium tetraboate

Take any shampoo, a slightly thanks and glue "Titan". The fresh glue, the better the sticky lydis will come out. Shampoo give the toy a pleasant smell. Prepare polyethylene coolers, use rubber gloves for work. Further your actions are as follows:

• make glue in the bag, shampoo and drop a bit of the koller or add the edible dye. The ratio of glue to shampoo - three to two;
• mix all before receiving viscous and thick masses;
• place a sticky miracle on a napkin, and let him lie, freezes.

Give Lizun to the child, and the baby enjoys a fascinating game.

Make a lysen from gelatin and plasticine without sodium tetraborate

Prepare 100 g of plasticine, 20 g gelatin and 100 ml of boiled cold water. Prepare adhesive substance:

• pull the gelatin in the Council;
• pour water and retain for 40-50 minutes to the side;
• heat a standby mixture. Do not bring up to boiling! Make sure that all gelatin particles are well dissolved.

In another vessel melt plasticine. Draw it in advance on small pieces. Pour 50 ml of water into a saucepan, place on the stove and bring up to boil. Glad in boiling water is lowered chopped plasticine, and stir up to obtain a homogeneous mass. You do not need to boil on fire! Having cooled gelatin add to the plasticine and thoroughly mix the mixture with a spoon. You can play the toy as soon as Lizun cools. But this method is rarely used, because Lizun is enough for several days.

Making lysuan from flour and water without sodium tetraborate

There is no chemistry in the toys. The recipe is the easiest as the ingredients. Pass into the metal cuddle of a glass of sifted flour. Pour at first cold water, and then - very hot. Add a natural dye - carrot or beet juice. Water take so much so that the mixture came out thick in moderation, homogeneous and tight. Constantly stirring when adding water. Mind to obtain a homogeneous mass. Put it in the kulek or in a glass container with a dense lid.

Place the lysuine in the refrigerator for three hours. Keep the toy there. On the street to play lysun it is necessary carefully, the mass can dry.

Security Rules for the manufacture of lysuine without sodium tetraborate

After playing with sticky miracle, wash your hands and a child. Toy, though not toxic, but make sure that the child does not pull it into the mouth. During the manufacture of Lizun, use the following recommendations:

• for the manufacture of sticky lump, use rubber gloves;
• use the apron or put the old clothes if you work with a dye or gouache. They leave stains on clothes and arms;
• take advantage of the preparation of any mixture of a separate dish, in which you will not prepare food;
• add as desired in a lot of sequins, small decorative parts. Experiment with the makeup toys.

The shelf life of a safe toy, made independently without adding sodium tetraborate, ranges from two days to week. Ingredients for manufacture are always found in the house. And the process of creating a sticky miracle, together with his parents, will give the baby a lot of pleasant impressions.