In the fight against limescale in the bathroom, the most important thing is to choose the right tactics, otherwise you can say goodbye not only to deposits of salts and minerals, which actually make up the plaque, but also to the plumbing. After all, the coatings that manufacturers use today come in different types.
What's the best way to avoid cleaning bathtubs?
Previously, there was no special choice of bathtubs - they were all made of cast iron with an enamel coating. Such baths are still used today in great demand. However modern world Plumbing fixtures are more varied: steel, acrylic have appeared, and you can even find bathtubs made of durable plastic.
It is important not only to know how to remove limescale in the bathroom, but also how to do it better - after all, each of the baths requires its own care. An incorrectly selected product will ruin the coating and make the bathtub look unsightly after just a few cleanings.
- First of all, you can't clean the bathtub metal scraper or with a brush - they scratch any coating, which leads to the formation of cracks;
- Secondly, you cannot use acid-containing cleaning products, especially those that we use to clean limescale in the toilet (by the way, we wrote about toilet cleaning products separately) - they corrode enamel, not to mention acrylic;
- Thirdly, enameled and cast iron bathtubs are cleaned once a week, and acrylic bathtubs are cleaned less often - once every 2 weeks.
If you follow these rules, then you will not need to look for ways to clean a heavily soiled bathtub from limescale. Now let's take a closer look, What is the best way to remove different types of limescale in the bathroom?
It’s quite simple to understand here - any powder contains abrasive substances. Cleaning powders can be used to remove limescale from cast iron and enamel bathtubs, but for acrylic and metal surfaces it is better to choose a liquid product in the form of a gel - this consistency allows the product to be evenly distributed over the surface and does not create an aggressive effect.
Now attention!
Liquid products To remove limescale, you don’t need to rub – they are applied to the surface, left for a certain time and simply washed off with water.
How to clean an enameled and cast iron bathtub?
It is not difficult to remove limescale from a cast-iron and enameled bathtub, provided that your bathtub has not been restored and the factory coating has been preserved. When choosing a cleaning product for cast iron and enamel bathtubs, as well as for metal taps and showers, study what is included in the composition:
- Inexpensive products do not contain anti-corrosion inhibitors - substances that prevent damage to the surface, especially if you are cleaning metal taps. By cleaning the bathtub and bathroom fixtures with a cheap product, you will be satisfied with the visible result, but the fact that you removed the coating from the surface of the bathtub and taps along with the plaque will become noticeable over time. Inhibitors act exclusively on limescale and prevent damage to the surface. Therefore, when choosing a product for cleaning limescale in the bathroom, look for the line in the composition - anti-corrosion inhibitors.
- If you notice sulfuric or nitric acid in the composition, set this product aside - this is “heavy” artillery for taps and bathtubs. Products with these acids are best used for cleaning the toilet or for neglected faucets and bathtubs - the so-called “one-time attack”. For frequent cleaning A surfactant-based product will be quite sufficient , which, getting into the water, split and act on problem areas.
Acrylic bathtubs: care features
Acrylic bathtubs appeared relatively recently and are very popular among consumers. The surface of this type of bathtub is smooth and easy to clean, so to remove limescale from acrylic bathtub, it is enough to use a liquid universal product that does not contain aggressive elements: ammonia, acetone, bleach - these substances can damage acrylic.
If you regularly monitor the cleanliness of the bathtub, rinse after use warm water and wipe with a microfiber cloth, then for thorough cleaning it will be enough to wash the bathtub with a cloth, after leaving the selected detergent on its surface.
Today it is not difficult to choose a limescale remover for an acrylic bathtub - most of them do an excellent job.
For those who are looking for how to remove heavy limescale deposits from an acrylic bathtub, we recommend using people's councils:
- Fill the bath with cool water (20 - 25 degrees);
- Pour 0.5 liters of vinegar (7%) into water or add a pack of citric acid;
- Leave everything overnight or for a day;
- Drain the water and rinse the bathtub clean water, then wipe dry.
- You can wipe taps and bathtubs with vinegar diluted with water to remove plaque.
- You can also add a little vinegar to the bathing water - a light acidic environment will soften the water and prevent the deposition of water stone on the walls.
- You can get rid of heavy deposits of waterstone using folk remedies:
- Mix the cleaning powder with water - make a paste, add a tablespoon of Whiteness and 2 tbsp. vinegar. This product will help remove limescale.
- Help clear limescale deposits ammonia, diluted in water, which is applied to the walls of the bath and washed off after a few minutes.
- Lemon juice, which is rubbed into the bathtub and washed off after 10 minutes, will also help deal with water stones.
- The plaque will go away if you rub the walls with enameled or cast iron bath vinegar and salt. This method will not work for acrylic.
- To disinfect the bathtub, just fill the bathtub to the top with water, to which add 50 - 100 g of White - this will help disinfect and whiten the bathtub.
As you can see, there are many ways to clean limescale in the bathroom. What is better to choose - ready-made remedy or use folk recipe, decide for yourself and share your advice with us.
How to get rid of plaque at home? This question arises precisely because of inattention to hygiene, refusal preventive examinations at the dentist.
We will talk about why deposits appear on enamel and how you can deal with them.
What is plaque?
Harmful bacteria and food debris covering the enamel with a film - this is what plaque consists of. Its appearance after eating is normal; if cleaned in a timely manner, it will not have time to cause harm. But if you don’t get rid of plaque in time, they will penetrate into the inner layer. Gradual accumulation leads to yellowing of the crowns, especially in the fissures and above the gum.
The rotting of food residues provokes and if you do not get rid of them, the enamel will become thinner, tartar and caries will appear. It is much easier to clean off the deposits at the first stage, since they are soft and have not yet penetrated the dentin.
Causes
After a meal, everyone can even notice by feeling that their teeth seem to be covered with a film. These are food debris and bacteria that begin to actively reproduce. For some time, the crowns will still remain snow-white, but gradually it becomes darker. Then it will turn yellow, and in advanced cases even black.
People find the most yellowness near the neck of the tooth, since plaque accumulates faster near the natural cavities. Regular use of a brush hinders the process, and if you don’t use it at all, it will be easier for food debris to settle on the soft mass covering the dentin. The outcome of this is the formation.
Accelerates plaque formation whole line factors:
- poor personal hygiene and inability to use it - it is ideal if you manage to brush your teeth after any food (even a snack), and especially after eating something carbohydrate. You can replace the procedure by using dental floss or at least rinsing the mouth;
- a course of treatment with iron-containing substances, since the microelement, due to its structure, settles on the enamel;
- abuse of chocolate, pastries and other foods high in carbohydrates;
- physiological characteristics - these include reasons due to individual factors: viscous saliva, its lack, frequent thirst, chronic diseases;
- smoking - the resins eat into the enamel so tightly that even with careful hygiene it is very difficult to remove them. The gradual accumulation of such deposits leads to yellowing.
Photo
Kinds
The division of plaque by professional dentists is even carried out by color. The hue often indicates its origin:
- brown and dark yellow - typical for people who abuse smoking, especially those who smoke a lot. In others, it occurs in the presence of an amalgam filling. Patients who do not have bad habits, are also susceptible to the formation of deposits of this color. This is due to the peculiarities of production (work in metal smelting) and lack of hygiene. Dark plaque occurs on children's baby teeth, which is a joint reaction of sulfur and iron;
- black - signals serious dysfunction in the body and may indicate pathologies of the biliary tract or severe dysbiosis. It also appears with abuse of antibiotics or after chemotherapy. It is impossible to deal with this color of deposits at home;
- white - appears after sleep. It also needs to be cleaned off to prevent it from rotting and turning into stone;
- green – the color is typical for people under 16 years of age. This type of layering is concentrated on the frontal part and is associated with eating something green that contains chlorophyll;
- gray layering - occurs as a result of enamel hyperplasia or may simply indicate insufficient oral hygiene;
- white-yellow - has a characteristic loose structure and accumulates throughout the day. Removing such deposits is easy and normal cleaning is suitable for this purpose.
The stages of plaque formation are as follows:
- thin layer occurs within 4 hours, even after cleaning;
- 7 hours after hygiene, the number of bacteria on it reaches 10 million;
- After 7 days, deposits become visible and an unpleasant taste and odor appear.
Gradually they all harden, and the remaining food is transformed into stone. It can be subgingival, regular or supragingival.
Professional techniques
Removing plaque with professional cleaning is the simplest solution that will bring quick results. This method is much more expensive than any home recipes. There are 3 methods of whitening:
- Ultrasonic cleaning removes, along with deposits, a layer of pathogenic bacteria. It is important that the enamel does not suffer from such exposure. After applying ultrasound, the surface is polished. This method is considered one of the available ones, and it also effectively removes even hardened components.
- Air Flow - the procedure is based on the use of a mixture of water and air with the addition of soda. The base is applied to the teeth under pressure, so polishing and removing plaque particles occurs without harm. This method is suitable even for hard-to-reach areas. Air Flow is contraindicated for people on a salt-free diet, asthmatics and pregnant women.
- Modern techniques complemented by laser cleaning. It is also effective and does not cause discomfort or damage. The enamel does not thin out, so the laser is suitable for lovers of cigarettes and coffee, as it allows you to repeat the procedure several times. It is used even for the darkest deposits, but even in these cases, anesthesia is not required before the start of the event. The results last for a year, but the cost is much more expensive than other types of cleaning.
Indication tablets help determine whether professional whitening is necessary. They are purchased at a pharmacy, placed in the mouth and chewed thoroughly. After this, the tongue is passed along the entire edge of the teeth, the cavity is rinsed and the crowns are checked.
This product turns areas where fresh deposits are located pinkish or red. Blue color will be in those places where food remains are already old. If there is more of this shade, then you can cope with it only with the help of professional methods. Pink dentin can be cleaned using normal, thorough hygiene.
How to remove plaque at home?
A number of methods can help remove plaque on teeth at home:
- Regularly eating citrus fruits will protect against the accumulation of food debris on your teeth. The vitamin C contained in pineapples, lemons and oranges restores blood circulation and prevents bad breath;
- black radish or its juice can corrode neoplasms, so these products should be consumed daily;
- Brew dry celandine in boiling water and heat in a water bath for 4 hours. This concentrated infusion is suitable for rinsing after meals;
- Burn the eggplant and crumble the ashes into dust. Place it on the brush and apply to the enamel. There is no need to rub it, just hold it for a while and rinse your mouth. If used regularly, the recipe will prevent tartar;
- take a few drops of hydrogen peroxide and lemon juice, add the mixture to the soda and stir until a paste forms. It is placed on the teeth and washed off after 5-7 minutes. If you can clean them with ashes, then it is better not to rub this product in, as it quickly injures protective layer because of large quantity abrasive components. You can repeat the mask only after a week;
- chopped burdock root (1 tbsp) and 3-5 dried bean pods. The ingredients are boiled for 3 hours, and after cooling, rinse your mouth with the broth. Repeat the procedure 5-6 times a day;
- Crush the activated carbon into a powder and sprinkle it toothpaste and gently clean the dentin.
Much more effective raid will be cleaned if you buy a brush with bristles high rigidity. It is better to use it alternately with soft bristles so as not to scratch the enamel. Constant trauma will lead to abrasion and increased sensitivity. The teeth themselves will become whiter, but their condition will worsen.
How to prevent plaque from appearing on teeth?
Prevention of deposits and tartar on dentin is quite simple. The rules are:
- eat rationally and nutritiously;
- to refuse from bad habits;
- regularly, use floss and rinses (fully);
- choose 2 types of toothpastes with different effects (medicinal and whitening);
- reduce consumption of tea, sweets and coffee;
- visit the dentist regularly.
Changing the brush to an ultrasonic one has a beneficial effect on the quality of cleaning. You can supplement your hygiene by removing food deposits even in hard-to-reach areas. And 1-2 times a year you need to carry out a thorough cleaning of plaque in the dental office. All these measures are an excellent prevention of any dental plaque and additionally prevent oral diseases.
Video: what happens if you don’t get rid of plaque?
To wash chrome coatings and accessories in the bathroom, they use not only folk remedies that saved our grandmothers, but also household chemicals. Before choosing a product, it is recommended to carefully study the label: make sure that the substance does not contain abrasive particles and alkalis, which negatively affect chromium. We propose to take a closer look at the issue of cleaning taps, chrome-plated plumbing fixtures, aerators using improvised means and industrial chemicals.
White water deposits can be seen in almost any bathroom. It appears due to the increased content of calcium and magnesium in water. When it gets onto taps and plumbing fixtures, it is deposited in the form of a cloudy white scum. If you do not clean it in a timely manner, your plumbing may become clogged and become unusable.
If in the case of a shower head or faucet aerator the housewife can solve the problem herself, then difficulties arise when cleaning chrome surfaces. Such coatings must be cleaned with care. It is recommended to comply following rules when washing them:
- Do not use metallic hard sponges to clean taps and plumbing fixtures. The resulting scratches will be impossible to remove.
- When choosing a chemical or folk method cleaning, do not use abrasives that damage the surface.
- If household chemicals contain hydrochloric, sulfuric or phosphoric acids, do not use this detergent. The consequences after it are as follows: the appearance dark spots, as well as rust, which will be difficult to remove.
- You should not mix several cleaning compounds at once yourself - there is a high risk of damaging the chrome coating with such combinations.
- Ask your store consultant about special detergents for chrome. It is better to choose a substance, even if it is more expensive, but intended specifically for a specific situation.
If you choose the wrong product, damaged plumbing will have to be replaced, which will result in large costs. At the end of the article, a recipe for a composition will be presented that will help restore chrome products for minor scratches.
Traditional methods for removing limescale
In order to spend less time cleaning faucets from limescale, it is recommended to wipe the products with a dry cloth after use. Most housewives forget to perform this procedure, and return to the problem only when scale has already firmly established itself on the plumbing.
Among the home remedies that do an excellent job of removing plaque are the following:
- baking soda;
- laundry soap;
- table vinegar;
- lemon acid.
We suggest considering the cleaning recipe using each of these methods in more detail.
Take a few spoons of baking soda and dilute it with a small amount of water. Apply the resulting slurry to the surface of the tap, and also treat other chrome coatings. Leave the mixture for 1 hour, then remove thoroughly soft cloth remaining funds. If you find small stains, gently rub them with the back of a dish sponge.
Apply the soda slurry using a soft sponge, damp cloth or toothbrush. You should not use steel wool, and make sure that the resulting mixture does not have visible abrasives. To do this, after preparing it, leave the soda for 5 minutes so that it dissolves in the water.
Hypoallergenic and disinfectant properties laundry soap have been known for a long time. It will also easily help remove the resulting white coating on plumbing:
A soap solution helps to deal with many contaminants, including scale. Experienced housewives can confirm that you can actually clean all surfaces in the bathroom and kitchen with laundry soap.
To remove mineral deposits on the faucet, you can use either a 9% table solution or apple cider vinegar. The recipe for the product is simple: mix vinegar with water in a 1:1 ratio. Take a cloth and wet it with the resulting liquid. Apply the substance to the plumbing fixtures and wait a little. Vinegar acts instantly, which is why it is a favorite cleaning agent for housewives in any situation.
Wipe all taps and showers in the bathroom and kitchen with a soft cloth. If stains from dried soap are noticeable here and there, wash them off with water.
Another way to get an effective result is lemon or citric acid. It is absolutely not worth using it in dry form: large abrasive particles can easily damage the surface of taps and showers.
To treat a faucet with acid, do the following:
- Pour a little product into the container.
- Add a couple drops of water.
- Without adding water, you can dip damp cloth into dry acid and wipe the surfaces with it.
In addition, a natural source of acid, lemon, copes with the task no worse. Take a whole lemon and cut it into 2 parts. If you plan to process a large amount of area, both halves will be useful. Squeeze a little juice into a container - you won't need it, it can be used for culinary purposes. Rub half a lemon over all chrome-plated items and leave for a while.
After treatment, wipe the taps and plumbing with a clean, dry cloth and enjoy the results.
Home cleaning methods are good because they involve the use of available means available to any housewife. If the above methods do not help, and the stubborn plaque does not go away, we suggest using household chemicals.
Anti-plaque chemicals
All chemical compositions pose some danger to human skin, so before use, be sure to wear rubber gloves, and if necessary, a face mask. Some products cause allergies; read the label and manufacturer's recommendations before purchasing.
Today, household chemical stores offer a range of products for chrome and steel products. They are divided into 2 types:
- Cleaners – help get rid of contaminants.
- Polishes - used at the final stage of cleansing.
To make cleaning your taps faster, purchase both products together.
Among the cleansing compositions, the following well-known effective agents can be distinguished:
Among the polishes, we can separately highlight the popular products “Domax” and “Indesit”. The latest brand specializes in the production household appliances Therefore, the compositions offered for polishing plumbing fixtures meet all standards.
These products are used not only for chrome taps. They have also proven themselves excellent in cleaning surfaces made of of stainless steel– sinks, slabs, furniture fittings and even dishes. The compositions are easy to apply: most of them have a dispenser nozzle, with which the substance is sprayed onto the product.
Following the manufacturer's instructions, the product is left for some time to penetrate the pores of the material, after which it is wiped dry, removing any residue. Polishes are used after cleaning: they process products to a mirror shine.
Some detergent compositions create an invisible film on the surface of the product, protecting the plumbing fixtures from plaque. Glass cleaner can also produce a similar, although not long-lasting, effect. Before treating the surface, check the label to ensure that it does not contain alkalis or acids.
Stuck faucet: how to get out of the situation?
When the faucet or mixer switching the water to the shower is not used for a long time, it may jam. The cause of such a breakdown is often a deposit of water stone, which can be dealt with as follows:
- Clean the faucet using one of the above remedies or traditional methods.
- If this method is not suitable, let's turn to another. Take vinegar and dilute it hot water. Dip the prepared rag into the solution so that it absorbs the product. Wrap a cloth around the jammed faucet, then wrap it in cling film. This is done so that the vinegar does not evaporate, but saturates the plaque deposits well and removes it.
- Another method that any housewife can handle is using universal remedy WD-40. It can be used to fix many problems, and a stuck faucet is no exception. Spray the joint between the tap and the mixer with the product and wait a while. The substance can be purchased at any hardware or automotive store.
If the proposed methods do not help to open the tap, you will have to call a plumber. In the future, to prevent similar situations, promptly clean the gaps in the taps.
It also happens that the surface of the faucet is cleaned, but the internal parts become clogged due to the deposits that have formed. Most often, the mesh nozzle that sprays water, the aerator, suffers. It serves to enrich the water with oxygen and ensure its uniform flow. An aerator is a useful faucet element that performs the following functions:
- reduction of noise level due to the formation of small bubbles;
- reduction of droplet splashing;
- significant water savings;
- filtering small particles of debris.
When an aerator becomes clogged, all of its intended functions are lost. Often this part is covered with lime flakes, which causes the holes to no longer cope with the task. Such blockages are characterized by the fact that when the tap is fully opened, water flows slowly and does not spray. In this case, the element must be cleaned:
- Unscrew the faucet nozzle: to do this, wrap it soft material and use pliers to turn clockwise.
- It is important that the aerator is made of steel, in the case of plastic part there is a high risk of it breaking when removed.
- To unscrew a jammed attachment, you can use the above method using WD-40.
- Rinse the tap hole with water.
- Place the aerator in the vinegar solution for several hours.
- The holes in the aerator must be additionally cleaned with a needle.
- Screw the cleaned element back into the tap. It is better not to tighten the fastener too much, so that you can remove it and clean it at any time.
If you have difficulty unscrewing the aerator, contact a plumber.
Cleaning plumbing fixtures
In addition to cleaning chrome taps, other plumbing fixtures also require cleaning: shower heads, darkened areas of appliances, as well as buttons on the toilet, cabinet fittings.
For cleaning, improvised means are also used, and if they fail, household chemicals come to the rescue.
Cleaning the shower head
It is important to clear clogged holes in the shower head in a timely manner, before they are completely covered with lime flakes. To do this, try to disassemble the shower head. Soak the parts that were removed from the structure for 2 hours in a heated vinegar solution. After this, rinse them with water to remove the odor.
The hydromassage nozzle itself must be cleaned using a needle. It is also recommended to use some chemical compounds and clean the injectors with a toothbrush.
Unfortunately, it is often impossible to restore damaged chrome plating. However, there is a tool that helps hide cleaning mistakes. For this purpose, a special polishing compound is used. metal parts car, including Goi paste. You can purchase such substances at any auto store, having previously consulted on this issue.
Another method of bringing chrome coatings to a shine is the use of car wax shampoos. They create a water-repellent film on the coating and protect the material from corrosion.
Don’t forget about timely cleaning of chrome taps, and then you won’t have to think about finding suitable products.
Hard water with lime, constantly flowing down surfaces and accumulating in recesses, forms a yellowish hard coating that can be difficult to remove. However, there are ways to get rid of this residue in the bathroom using regular products from kitchen drawers and first aid kits. To avoid damaging plastic, acrylic, ceramic or other materials, it is necessary to select and use products that are suitable for each specific case.
- table vinegar 6% concentration or essence diluted with water in a ratio of 12:1;
- citric acid;
- ammonia;
- baking soda;
- hydrogen peroxide;
- salt.
- 1. Vinegar. The product is sprayed from a spray bottle and left for 15 minutes. Then rinse with warm water and wipe the surface with a sponge (not the rough side, but the soft one). For an old raid, the waiting time increases by several hours. The tile joints can be rubbed with an old toothbrush of medium hardness without strong pressure. To enhance the effect and carry out additional antibacterial treatment, after thoroughly rinsing the vinegar with water, apply any household detergent with chlorine to the surface (except glass). This action is necessary after cleaning the pool and tiles in the bathhouse.
- 2. Citric acid. To prevent dry particles from damaging the surface, it is diluted in warm water in a ratio of 50 g per 150-200 ml. When the citric acid is completely dissolved, a fairly thick substance in the form of a flowing gel should form in the container. The resulting substance is applied to the surface and after half an hour is washed off with warm water.
- 1. The water is drained from the tank and one of these products is poured into it in a volume of 300 ml of liquid or 100 g of dry matter.
- 2. After filling the container, wait 30-40 minutes.
- 3. Then the water from the tank is drained.
- 1. 50 ml of ammonia is mixed with 500 ml of warm water.
- 2. The composition is poured into a container with a spray bottle and sprayed onto areas with water stone.
- 3. Then the surfaces are wiped with a damp microfiber or natural cotton cloth.
- 1. Wipe the surfaces with a soft cloth 2 times a week with detergent for dishes.
- 2. Do not use compounds with abrasive particles and chlorine.
- 3. Regularly remove moisture with a dry cloth.
- 4. Do not rub surfaces with brushes or hard sponges.
- 1. Moisten a thick rag in a vinegar solution.
- 2. Cover the part of the faucet or tube with plaque with a moistened cloth.
- 3. Secure the napkin with a rubber band.
- 4. Leave it for 2-4 hours.
- 1. Pour the maximum permissible volume of cold water inside.
- 2. Pour 2 tablespoons of food grade citric acid into it.
- 3. Place the kettle on low heat.
- 4. Boil for 20 minutes.
- 5. Turn off the heat and leave the kettle with water and citric acid for the night.
- 6. In the morning, rinse with warm water.
- 1. Pour vinegar (3 teaspoons) or citric acid (50 g) into the powder compartment.
- 2. Run a long wash cycle (at least 1 hour) and set the water temperature to 90°C with an empty drum.
- 3. Wait until the wash is finished.
- 1. Remove it from the recess.
- 2. Place in a container with dishwashing detergent diluted in warm water (40-50°C) for 20 minutes. The coating will become softer and more pliable.
- 3. After this, rinse the compartment and spray ammonia or hydrogen peroxide on its surface.
- 4. After 5 minutes, rinse the structure with water and remove any remaining plaque with a soft sponge.
Show all
Home remedies to combat limescale in the bathroom
Lime is destroyed by acid, which is why it is included in most special cleaning products from the store. At home, you can easily find a replacement for them and get the same effect. Without harm to health and most surfaces you can use:
When the limescale deposit is still fresh and there is only a small amount of it, any dishwashing detergent will also work. washing powder and even oxygen laundry bleach.
How to wash potassium permanganate from the bath, hands and clothes
Methods for cleaning different surfaces
The most resistant to impact chemical substances The materials are cast iron, tiles, glass, but they cannot be cleaned with compounds with abrasive properties. Small and hard particles damage the surface, promote the growth of bacteria, black mold and increase the formation of limescale. You should be especially careful when disposing of it on plastic, acrylic, chrome-plated metal, and budget stainless steel (poor processing and coating lead to corrosion under the influence of chemicals).
When using any cleaning products, you need to protect your hands with thick rubber gloves. If the room where the work will be done is small and without an exhaust hood, or the shower stall is to be cleaned, then you will also need transparent plastic glasses.
Tile, ceramics, cast iron and glass
To clean such surfaces use:
Table salt or baking soda dissolved in warm water and dishwashing detergent will help remove fresh limescale deposits on sinks, glass, mirrors and bathtubs. Hydrogen peroxide and oxygen bleaches will help refresh the color of tile joints and enamel of sanitary bowls.
Vinegar or citric acid will help remove plaque and restore the whiteness of the toilet. For this:
Lime deposits will be removed from the bowl if you spray vinegar on it, and after 30 minutes, gently clean it with a brush without strong pressure.
Ammonia is suitable for cleaning mirrors, transparent shelves and doors. For this:
The aquarium is treated with vinegar and ammonia only after moving its inhabitants into separate containers with water and completely draining the container.
Acrylic and plastic
Acrylic and plastic can be washed with mild detergents without chlorine or aggressive acids. Otherwise, damage to bathtubs and shower stalls is inevitable, and baseboards will crack and become rough.
To carefully clean acrylic and plastic from limescale and prevent its reappearance, you need to follow these rules:
Acrylic and plastic can be wiped with ammonia or hydrogen peroxide, but do not leave these substances on the surface for more than 5 minutes, rinsing them off with cool water.
Chrome taps and pipes
To clean chrome surfaces you will need vinegar and warm water(40°C), mixed in equal proportions. Next you need:
Option for attaching a bag with cleaning solution for non-removable elements
This method helps in removing accumulated and hard-to-reach plaque. To clean the shower head, you need to unscrew it and place it in a bowl with this solution for 30 minutes, then rinse it under the tap and gently wipe it with a dry cloth to remove any remaining lime.
If you treat the plaque with steam before using any of the above products, it will come off much faster and without extra effort. You can use the shower stall hot water and close the doors for 10 minutes.
Cleaning kettles and washing machines
Lime also accumulates in teapots and washing machines. As a result, they deteriorate, the enamel coating cracks, and broken particles end up in food. You can remove limescale deposits in a plastic kettle in the following way:
To remove limescale from the heating element washing machine, need to:
Repeat once a month or less, the frequency depends on the quality of the water. Prevention will help prevent damage to household appliances.
To clean only the powder and conditioner compartment, you need to:
If you carry out preventive washing cycles with vinegar or citric acid, then lime rarely accumulates in the powder compartment.
In the apartment and country house there are many plumbing fixtures. All of them require careful care, which will preserve their pristine beauty throughout their entire operation. This is especially true for the toilet, which is subjected to serious stress every day.
A common cause is limescale deposits on the walls of plumbing fixtures. It has a negative impact on appearance devices and leads to the development various bacteria. Therefore, every housewife should know how to clean the toilet from limescale.
Many people believe that removing plaque from a toilet bowl is a difficult task. But actually it is not. With the right approach, solving this problem is not so difficult. To combat deposits, various household chemicals and folk remedies are used. Each method has certain advantages and disadvantages.
Among chemicals, which are used to remove urinary stones and limescale, it is worth highlighting:
- Abrasive detergent.
- Acidic substances
- Alkalis.
Each of these agents has its own effect on deposits. To achieve the desired result, they must be used in accordance with the instructions, which are most often applied to the packaging. You can also clean the toilet from limescale using folk remedies. It is highly effective:
- Vinegar.
- White.
- Lemon acid.
- Powder and others.
As you can see, there are many tools that allow you to quickly and easily special effort cope with problems such as lime deposits on plumbing fixtures. Now you can carefully consider each of the cleaning methods. So, how to effectively remove limescale from a toilet?
Folk methods of struggle
To keep your plumbing fixtures looking attractive and prevent lime deposits, it is necessary to carry out regular cleaning. So, the toilet needs to be cleaned at least once a week using chemically aggressive substances. If you do not do this, then after some time you will have to deal with plaque removal.
Vinegar
If a small layer of plaque has formed on the walls of the toilet, then get rid of 
you can get rid of it with vinegar. The advantage of this product is that it is available in almost every kitchen. Of course, if deposits have accumulated over a long period of time, then use this substance pointless. It is necessary to remove plumbing fixtures in the following order:
- Heat a glass of high-percentage vinegar until warm.
- Pour the substance into the toilet and wait a few minutes.
- Cover problem areas with baking soda and leave overnight.
Overnight the plaque will completely dissolve. If we're talking about O serious pollution, then the procedure is carried out several times until complete elimination.
Oxalic acid
Oxalic acid is used to remove a large layer of plaque. When using such a product, it is worth considering that it is highly caustic. Therefore, care must be taken when working with the substance. You can buy acid at a technical store. Cleansing is carried out in the following sequence:
- Pour the substance onto a thick cloth and carefully wipe the problem area with it. If the contamination is very serious, then the product is poured directly onto the plaque and left for several hours.
- After a certain time, wash everything off big amount water.
When using acid, you should follow safety precautions. So, you need to use gloves and safety glasses. It is also worth ensuring the maximum permissible ventilation. Using oxalic acid, you can easily remove plaque and give sanitary product original shine.
Lemon acid
If you don’t know how to remove small deposits in the toilet, then you should 
use regular citric acid. Of course, such a remedy has low effectiveness, so it should not be used in difficult situations. Citric acid is ideal for loose and light stains. You need to get rid of deposits using the following technology:
- Rinse off the water, which will allow you to pre-prepare the plumbing for further cleaning.
- After this, you need to pour several liters of hot water and add 100 g of citric acid. It should be borne in mind that hot water is used for cleaning, not boiling water.
- Using a thick brush, thoroughly clean problem areas and leave for several hours.
- After a certain time, re-brush the surface and rinse.
If we are talking about complex contamination, then the treated plumbing is left overnight. This will significantly increase the efficiency of plaque removal.
White
No less effective means, with which you can clean the toilet from plaque, is whiteness. Of course, simply pouring the substance into the toilet here will not be enough. Before treating the plumbing, you must first drain all the water from it. Only after this can a chemically aggressive substance be used.
Only a few hours are enough for the plaque to completely dissolve. Of course, if we are talking about complex contamination, then it is better to leave the plumbing fixtures overnight. After the required time has passed, processing is carried out problem area with a brush. All that remains is to rinse the water several times. It is important to know that it is not recommended to use plumbing fixtures while there is a cleaning agent in them.
Electrolyte use: yes or no
Today you can often hear information that you can remove limescale using an electrolyte. This is the absolute truth. But, there are some restrictions on the use of this tool:
- You should not use electrolyte if you can use a whiter cleaner.
- It is not advisable to use electrolyte in cases where there is plastic pipes. This may damage them.
- If we are talking about autonomous sewer system, then this cleaning substance should also be abandoned.
If you still choose an electrolyte, then when using it you should follow some rules.
The substance is chemically aggressive and can cause significant harm to human health.
Even a small amount of the product can cause a burn. So, what safety rules should you follow when using the substance:
- The work must be carried out in the means personal protection: glasses, gloves and respirator.
- The substance is applied only to the dry surface of the plumbing fixture.
- The electrolyte must be poured very carefully to prevent splashing.
- Before flushing, it is worth closing the toilet lid, which will prevent the chemically active substance from getting on your body.
The electrolyte is produced on the basis of a strong acid, so you need to get rid of plaque very carefully. Now we will carefully consider how you can remove limescale from the toilet using household chemicals.
Special means
The most common cleaning products include: 
- Toilet duck. Despite the fact that the product has high efficiency, it is worth using several times. Pre-remove water from the toilet, which will improve the results of using the substance.
- Comet. The substance, which has a very thick structure, can remove not only plaque, but also rust. The product has a distinct pungent odor. Therefore, it is worth taking care to ventilate the room after treatment.
- Silit. It contains chlorine, which gives the substance a distinct odor. Therefore, it is necessary to ensure normal ventilation of the toilet. Using Silit you can remove limescale.
- Domestos. Ideal product for regular use. Has a pleasant smell. The substance can only remove minor deposits.
- Sanox. Unfortunately, it has low effectiveness, but is widely used as a prophylactic agent. It is highly popular due to its low cost.
- Lock. Means famous company, which produces various household products. Very popular among the population, despite the high cost. Unfortunately, it is not highly effective in combating limescale. Widely used for antibacterial treatment of plumbing fixtures.
In fact, there are quite a lot of means to combat limescale. Proper Use This or that product will improve the cleaning efficiency. And do not forget about protective equipment when using chemically aggressive substances.