How to easily and quickly clean floors without streaks after renovation. Several ways: how to clean a floor after renovation How to clean a white floor

After renovation, the room requires thorough cleaning. However, sometimes it is not so easy to remove the remains of building materials. Especially when it comes to floor coverings, which suffer from contamination in the first place. Today I will tell you how to quickly and easily clean linoleum.

General rules for caring for linoleum

1. When renovating, be sure to cover the floor as much as possible. Oilcloth, newspapers, wallpaper and other materials that are at hand are suitable for this. Secure the improvised flooring You can use tape to the baseboards.

1. Try not to use sharp objects(knife, spatula) to remove dirt. This may damage the linoleum.
2. Before using aggressive cleaning agents(solvent, alcohol-containing products) it is advisable to carry out a test for small area linoleum.
3. Baking soda and alkaline detergents are absolutely not suitable for cleaning linoleum.. It is quite difficult to wash off alkali - it penetrates deeply into linoleum and can leave stains. Moreover, it not only has a bad effect on appearance coating, but also destroys its structure, making linoleum brittle and brittle.

1. Don't forget to wash the floor with rubber gloves- some products can harm the skin of your hands.

Removal of various building materials

A piece of cloth soaked in linseed oil or drying oil will help restore the shine of linoleum. Just rub it on a washed and dry floor.

3 recipes for removing cement and whitewash from linoleum

After using cement and whitewashing in a room where linoleum is laid, even after thorough cleaning, whitish stains and plaque remain on the floor. This happens because the cleaning product chosen either did not cope with its task or is not suitable for this type of coating.

How to clean whitewashed floorsand cement? To do this, it is better to use the following tools:

Image	Cleaning agent
	Recipe 1. Salt and soap Not a large number of salt and soap diluted in warm water will help to easily clean the whitewash from the floor. Please note - the water should not be too hot, otherwise the linoleum may lose its brightness and shine.
	Recipe 2. Manganese A few grains of potassium permanganate dissolved in warm water will help remove the unpleasant white coating.
	Recipe 3. Kerosene For serious stains, use kerosene dissolved in water. The product has bad smell, so after using it you need to rinse the floor again.

2 recipes for getting rid of paint stains on linoleum

To remove paint from linoleum, it is better to use the following products:

Image	Cleaning agent
	Recipe 1. Sunflower oil Sunflower oil is an excellent paint softener. After this, it can be removed with a stiff brush.
	Recipe 2. Solvent Dried paint stains can be removed with thinner or another product containing a high alcohol content.

The main rule in removing paint is to do it immediately after contamination. Old paint stains are much more difficult to remove.

5 ways to remove primer and foam from linoleum

How to remove primer from tiles and linoleum? To remove traces of primer and polyurethane foam, it is better to use the following products:

Image	Cleaning agent
	Method 1. Construction spatula This tool is perfect for removing foam that has not yet hardened. Just collect it using movements from the edge to the center, and then wipe the mark with a special cleaning agent.
	Method 2. Sharp cutter Suitable for removing hardened foam. Cut off the foam and treat the contaminated area with a special cleaning agent.
	Method 3. Rags Fresh primer from linoleum can be collected with an ordinary floor rag. After this procedure, the floors need to be washed.
	Method 4. Acetone A solution of acetone in water (one-third acetone, two-thirds water) will help remove already dried traces of primer. For this product it is better to use a rough washcloth.
	Method 5. Nail polish remover If the contaminated area is not too large, you can use by usual means nail polish remover and a hard sponge. How to remove primer from tiles? In the same way.

Linoleum cleaning products

Special products for cleaning linoleum

For heavy pollution You can use special store-bought products to clean linoleum. The most popular and effective:

Image	Cleaning agent
	"TaffStuss"- multifunctional foam cleaner for dry cleaning various coatings, including linoleum.
	"White Spirit"- a strong solvent that will easily remove any dirt. When using it, you should take precautions - use gloves and ventilate the room well.
	"646"- a multicomponent solvent that easily copes with various paints and varnishes. Main advantages: ease of use, efficiency, low price. Main disadvantages: toxic, highly flammable.
	"Mister proper" - One cap of this product, dissolved in a bucket of water, will do an excellent job of removing stains from whitewash and plaster.

Folk remedies

Finally, I’ll tell you about effective folk remedies, which will help you clean linoleum from various contaminants with your own hands and preserve its beauty:

1. Water and milk in equal quantities they can refresh linoleum and give it shine. And if after that you rub the surface woolen fabric, it will not just shine, but sparkle!

1. Elderberries will help clean linoleum in the kitchen and easily remove even stubborn dirt and greasy spots.
2. Potato starch Easily removes iodine stains. To do this, the starch must be moistened with water and the resulting slurry applied to the area of ​​contamination. The procedure must be repeated until the stain completely disappears.

1. School eraser will help remove marks from rubber shoes.
2. Match- yes, yes, you heard right - an ordinary match will easily remove traces ballpoint pen. Simply wet the match and rub away the dirt. The paste will become damp and can be easily removed with a cloth.

If you whitewashed the ceiling and there is whitewash left on the floor, the floor can be washed very easily if you add half a glass of Domestos to 1 bucket of water. I always do this, everything that needs to be washed is washed. True, it smells like bleach afterwards, so you need to wash it afterwards. plain water repeatedly.

But in general, for the future, to rid yourself of difficult work cleaner, it is better to cover the floor before repairs.

By the way, Domestos even washed away traces of the marker on my linoleum. This is a toilet bowl cleaner, but during renovations I use it as a multipurpose cleaner.

After repairs, what remains on the floor is mostly whitewash or cement; in the case of wallpapering, there is also wallpaper glue - this is from the debris that is small and difficult to wash off; all other debris can be collected with a vacuum cleaner. In addition to mortar cakes, mastic and polyurethane foam.

So, as mentioned above, first we remove large debris, then vacuum the smaller ones.

Leave the floor for some time until it dries and clean off any debris and Construction Materials stuck to the floor mechanically.

The next step is to collect the debris with a rag and warm water, squeezing it out often...

After the bulk of the garbage has been collected, you can take a detergent, for example, to remove whitewash

and wipe the floor with this product several more times...

The final step is simply washing with warm water.

Initially, you need to collect all the dry particles as much as possible, carefully rake with a plastic or rubber spatula, the remains of plaster, putty, possibly other mixtures and solutions, wash the floor as thoroughly as possible with plain water, and then use the following products:

Glue and primer, whitewash, putty and water-based emulsion - can be easily washed hot water With detergent for dishes using a kitchen sponge.

Paints, varnishes and enamels should be blotted with solvent and quickly wiped with a clean cloth.

Finally, it will help to wash floors (wooden, tiles, linoleum, parquet) with softened water, add 200 grams of vinegar to a bucket of water and wipe the almost clean floors, baseboards, steps, thresholds, maybe doors, decks, windows, window sills - to completely remove the remnants of the repair on surfaces.

If you whitewashed or painted the ceilings, then you had to lay a film on the floor, which can be fixed along the baseboards with a rope, then the floor would not be dirty or stained, but if you need to wash the whitewash, then a bucket of water will suffice, though not just one, and the rags will need to be changed, and if the floor is stained with paint, then you need a solvent and a rag to wipe off paint stains. You also need to know what kind of floor you have, if it’s painted and you won’t be updating it. new paint, then wash, wash and wash with water, and if it’s parquet, then you’re in trouble, you need to renew it, that is, scrape it and varnish it, since it absorbs everything very much. White spirit, acetone-based solvent, special products for stains of glue, silicone, whitewash, paint, should be purchased in specialized stores, after consulting with specialists.

There is no definite answer to this question, since during the renovation process the floor can be contaminated with various building materials.

If you did not take care of protecting the floor before carrying out construction work- make it a rule to wipe stains from difficult-to-remove contaminants immediately (oil paint, polyurethane foam, silicone, etc.). Otherwise, it will be impossible to wipe it all off without damaging the floor later. Remains of wallpaper paste, whitewash, etc. They can be easily washed off with water after a few wipes or later.

For complex stains, it is worth using solvents specifically for each case. On oil paint White spirit, etc. But the condition of the floor after this will be deplorable; it will have to be painted or treated according to the material from which it is made.

You can wash a painted floor using solvents or even using a simple rich hand or face cream (such as “Evening”). The same can be used for parquet floors, but the cream can remove paint stains, but at the same time leave greasy stains on the floor (unless, of course, there is a varnish coating). But even here you can “pull out” the floor a little to a normal appearance by using, again, a simple Russian cologne (like “Carnations”) to remove greasy stains. Pour a little liquid onto the stains and then wipe them with a soft cloth. Stains should come off easily.

The floor is washed with a floor cleaner, but the fact is that each coating has its own product. Unfortunately, in your question you did not indicate which floor you have, so I will provide cleaning products for the following types of floors:

• concrete, screed, self-leveling - clean excess spots with a spatula, sweep away with a broom, prime with a penetrating primer;
• laminate;

• tile;

• parquet;

Brilliant results will be ensured professional products“For wooden floors” and proven traditional methods, but before we start, we will introduce you to our partners http://magia-pola.ru/catalog/vinyl_tile/, they have the largest and most vibrant catalog in Russia

Wooden floors are more susceptible to contamination than flooring with modern protective and decorative coatings. However, there are several ways to properly clean floors, depending on the type of board and its treatment. I'll tell you about this.

What should you consider?

Any problem is solved taking into account the type of board, its coating and the type of contamination.

The parquet floor should not be wetted with water, otherwise it will quickly become unusable.

Excessive moisturizing is unacceptable, even if the planks are varnished, since the parquet floor is laid from equally small planks. They are tightly fitted one to another. This cladding is concrete or wooden base has many joints in which water is retained and destroys the wood over time.

The “For Parquet” product will provide high-quality cleaning and will not damage the expensive wooden flooring.

The means are also selected specially- specifically for parquet. They form a shiny protective film, polish the boards and close the cracks.

Varnished plank floors also require a special approach to cleaning.

And the boardwalk is made from large boards. Their sizes are different. And in order to clean the plank floor, its own nuances are taken into account. Namely, whether it is painted or not. Therefore, caring for wood flooring also depends on its treatment:

All joints can be cleaned with a regular vacuum cleaner with a floor attachment.

• You need to vacuum the floor first, that is, use dry washing. This applies to all wood flooring. After all, it is very difficult to wash out dust in cracks and joints, even using the most effective cleaning agent;
• Then wet cleaning begins wood floors.

How to clean plank floors

Ideal to wash plank covering You can only use your hands and a soft cloth, but not a mop!

Wood cannot be cleaned with dry cleaning agents., with abrasives, undissolved soda. Hard brushes and rags will also scratch it.

A fleecy cotton cloth will remove all dirt without damaging the varnish.

When choosing which rag is best to wash the floor with, we will prefer cotton. It wrings out well, is soft, and adheres to the surface as much as possible. The result is a perfectly clean floor.

For daily cleaning, you only need to lightly moisten the mop head.

Ordinary cleaning– clean water and a damp (it should not drip) mop.

General– using diluted floor cleaner. The flooring is generously moistened with it, the cracks are washed out, and then the wet surface is wiped dry.

Method 1. How to wash an unpainted floor

Unpainted flooring is the most difficult to maintain - wood absorbs dust and moisture.

Before washing, unpainted floors must be freed from debris with a vacuum cleaner. Particular attention is paid to the joints of the boards. After all, it is in these irregularities that dirt is deposited and is especially noticeable. And it’s not easy to wash it out even with a brush.

Unpainted wood deteriorates from moisture: it swells and bends.

Then the stains are examined, because different contaminants are removed in different ways.

Professional compounds will cope with many stains

Proven old ways:

• Powder baking soda eliminates black marks from shoes (it can be used on unpainted surfaces). You need to sprinkle baking soda on the dark mark, and then wipe the area with a damp sponge. And the grains of soda will be sucked in by the vacuum cleaner.
• Alcohol or vodka You can remove any stain from wood. Then use a sponge and soda to clean off the mark.
• A solution of ammonia You need to wash the sticky stains first, it will easily remove them. Then remove the remaining sticky substance with a spatula.

Having eliminated all stains, you can begin general washing.

Here's what's best for cleaning floors if they're unpainted:

• take lime and sand(you need to mix 50g and 150g, respectively);
• add 4 liters of water to the mixture;
• then with a soft brush wash unpainted boards.

This solution will perfectly clean unpainted wood flooring and also disinfect it. After drying, vacuum the floor.

Soda and vinegar - ancient remedies for washing and disinfecting plank floors.

Soda solution– more accessible remedy. Dilute half a pack of baking soda with 4 liters of water. Then wash the boards with a brush.

Vinegar and ammonia (2 tablespoons in 5 liters of water) - this composition can be used to wash the floors in the store and at home. It will ideally remove dirt from an unpainted wooden surface.

Let's look at how to properly wash floors after renovation.:

• Sweep with a broom various garbage;
• Go through a vacuum cleaner to completely clean the boardwalk from construction dust. Now the ingrained dirt is already visible on it, as well as stains from paint, glue, plaster;

Makes your work easier special remedy and a hard sponge.

• We use products from the “Everything for Repair” line. Using these universal developments, you can quickly eliminate all repair debris.

People's Councils, how to wash floors after renovation, they offer proven compositions from available ingredients:

• sandpaper carefully wipe off traces of glue without removing the paint;
• brush clean off drops of plaster and lime;
• a glass of kerosene or gasoline in a bucket of water will refresh the wood after repair;
• diluted vinegar will immediately eliminate the pungent kerosene smell.

After washing, the surface is waxed - this is its protective layer.

The cleaned flooring is treated with a moisture-protecting agent with the addition of wax or silicone (the price of this composition is reasonable).

Method 2. How to wash painted plank floors

Brightly colored flooring may fade if not washed properly.

Painted floors are easier to clean. After all, dirt does not eat into the wood due to the monolithic layer of paint:

• Dilute vinegar or ammonia in water(1 spoon per 1 liter) and moisten a mop sponge or rag with the resulting solution;
• The mop should glide without leaving the surface. The correct way to wash the floor is to move the mop like a sailor: “figure eight”;
• For shine You can make a solution of 2 tablespoons of vinegar, 1 tablespoon of preparation for the shine of cabinet furniture and 2 liters of water.

It is not recommended to rub the surface with wax or oil-containing substances, since painted wood does not absorb them, and instead of shine, sticky dirt will soon form.

Household chemicals are the solution to the problem of how to quickly clean the floors at home.

Stains from painted boards are removed locally with alcohol. Then “For the floor” products are used - they thoroughly wash the entire surface.

Such moistening is permissible only during “general” cleaning, and not daily

Urine mark can also be washed. You will need:

• Dry cloth. Baby's urine or pet eats into the wood structure. Therefore, it is immediately collected with a dry cloth.
• Dish detergent. Then gently wash the stain with dish soap.
• Ammonia. Next, wipe with ammonia diluted in a glass of warm water. It will return shine and uniformity to the surface.
• Vinegar. But washing the floor with vinegar and water (1:10) will eliminate the unpleasant odor and refresh the color of the painted boards.

The use of chlorine-containing products on a painted surface is undesirable: the smell will disappear, but the surface will brighten forever.

The final stage is to wipe the floor dry.

How to wash parquet

How to wash wooden floors? Clean parquet floors regularly better water with vinegar.

Expensive, exquisite parquet flooring must be washed from dirt carefully and preferably with your own hands. After all, its protection from damage is important. Often parquet flooring is not varnished, but simply rubbed carefully and regularly.

Lacquered parquet flooring Do not clean with dry powders to avoid scratching the varnish. And you need to regularly refresh it with polish.

For frequent washing, you can purchase a special steam mop (pictured) so that the coating does not get wet

Moisture will penetrate even with a water-repellent coating: into microscopic crevices, cracks, holes. Then the wood will become deformed, the floor will begin to creak, and the parquet boards will fall out.

Method 3. Professional parquet care

Only gel formulas - and no powders!

Now there are many products for such plank floors. And the instructions for their use guarantee the desired result. Of course, they make labor-intensive wet cleaning much easier.

When fighting stains, it is better to beat the product until foam forms - it will wash the surface without penetrating deep into the surface.

You should wash the floor with a slightly damp cloth - the foam cleans well without excess moisture.

The selected solution must be marked “for parquet”.

New formulas eliminate greasy stains and stubborn old dirt.

Such compositions cope, besides effective removal dirt, with several more tasks:

• Form a protective wax or silicone film;
• Gives a glossy polymer shine;
• Leave no streaks;
• Gives wood moisture resistance;
• Does not require rinsing;
• Effective even in cold water;
• Non-toxic and safe.

The usual use is to dilute the composition in water and wash the floor.

It will protect and renew wooden floors from scratches.

Conclusion

Now, having learned the recommendations and tips, you can easily wash the floor with a brilliant result, and admire the well-groomed wooden floor for a long time. Now I suggest you watch the video in this article - in it clear example How to wash such flooring. We can discuss your questions and ideas in the comments - write!

When the renovation is completed, the question arises: how to clean the floor from construction dust? Often, standard flushing does not help, but only causes new complications.

Many companies offer specialized cleaning products, but not all of them are equally effective.

The rubbish settles after whitewashing, installation, or using a drill. Large elements are easy to remove without additional substances, while small particles cannot be removed even after 3-4 times.

In this article we will talk about most options for removing dirt after renovation.

Preparation

Have you previously encountered the problem of floor contamination after construction work?

If your answer is yes, then we can say with certainty that the problem is primarily due to poor preparation for repairs.

Before starting repair work, it is better to stock up on film, polyethylene or newspapers with which to cover the flooring.

Advice! Paper is not a good enough blanket because there are gaps between the individual sheets. A large amount of debris will penetrate into the gaps.

Any coating will not provide complete protection, but it will significantly reduce the degree of contamination.

If you forgot to protect the flooring, do not despair: there is a huge variety of cleaning products and methods that can effectively remove all dirt.

Before starting work, you must protect your hands from the aggressive effects of cleaning mixtures. Rubber gloves will be needed here.

If there is a lot of plaque and its particles are small, it is recommended to use respirators or special protective masks. This way you can protect your Airways from dust, which can negatively affect the body.

Small furniture should be removed from the room, but large furniture should be moved.

Tools and stages of plaque removal

Cleaning up various surfaces requires careful selection of tools and materials.

What will be effective for tiles may harm the parquet or will not help at all when processing tiles.

In most cases, to remove debris you will need the following materials:

• buckets and other containers;
• washcloths;
• special napkins for cleaning;
• vinegar;
• table salt;
• kerosene;
• ammonia;
• cleaner (preferably organic);
• dishwashing and tile cleaning products;
• washing liquids;
• substances for cleaning wooden surfaces.

Regardless of the complexity of the contamination, cleaning is carried out in several stages.

1. First, large debris is removed, be it large layers of plaster or pieces of brick. After this, sweep the dirt from the corners to the center of the room with a wet broom.
2. Using a wet cloth, wash in several steps.
3. Next, you need to add a cleaning agent to a container of water, and then rinse the floor again.
4. After repeating this procedure several times, you can wipe the surface dry with a regular microfiber cloth.

Features of different surfaces

Small debris quite often causes a lot of difficulties after repairs. It gets stuck in cracks and can form hard deposits when wet.

Processing is complicated by the fact that each coating uses different methods, And wrong selection materials can cause serious harm.

Also, before starting, all furniture, tools and auxiliary materials are removed, thereby clearing the field for activity.

Wood flooring with paint

If your home has a painted floor, then when cleaning you should take care to ensure that the coating layer is not damaged or loses its properties. There are several methods:

• Ammonia. These components must be mixed in the ratio of a tablespoon of ammonia per liter of water. Use a cloth to wipe the area, after which it can be soaked with a small amount linseed oil and wipe again. This will make the paint shine.
• Acid agent. Depending on the complexity of the contamination, the substance is dissolved in a ratio of one to five, and more solution can be used. Next, the resulting mixture is applied and left for some time. After this, mix the substance well.

These are the most common and proven effective ways putting the room in order. If you don't want to destroy your decking, it's best to follow the directions.

Advice! Upon completion of cleaning, you can cover the treated area with a simple solution: add a glass of vinegar to one bucket of water. This way you can add shine to the surface.

When all the procedures have been completed, it is better to finish them with a dry cloth to avoid the appearance of streaks and stains.

Linoleum

Linoleum is one of the most common types of coating. Its main advantage is its structure, which is resistant to any damage.

In this regard, cleansing can be performed using any method. The most popular among them are:

• Washing vacuum cleaner. Unfortunately, the relief structure becomes more dirty than the glossy one. Debris gets clogged into its “pores,” which is not easy to remove with a regular napkin. If you don’t have a washing vacuum cleaner at home, you can rent one. You can also replace this device with a regular brush, however, working with it will be a rather labor-intensive process.
• Vegetable oil. Taking a solution of oil and water in a ratio of one to one hundred, you can clean it with a simple rag. After this, take a container with clean liquid and add one glass of vinegar to it. We clean again with this solution, and then rinse the surface.
• Kitchen salt and detergent. Will help in the fight against lime dust. One tablespoon of the substance is diluted in a bucket and the cleaning is done. After this, add half a glass of salt to a new container with the substance and wipe the area. Once finished, you can wash the linoleum with plain water.

There is also great amount specialized cleaning products that will help effectively remove dirt.

Advice! You need to wash with a well-wrung out cloth, and the water should not be too cold or hot. Immediately after completing the procedure, dry it with a sponge or cloth.

Do not spill a large amount of liquid, otherwise the linoleum will begin to become covered with tubercles.

Parquet

Parquet is a fairly expensive floor covering; before starting repairs, it is recommended to take all measures to protect it.

• Using a vacuum cleaner, all small particles are removed. It is better to use a nozzle with a soft structure.
• A special solution for parquet is diluted in a bucket. For this, 100 ml of product is enough.
• The rag is blotted and wrung out well, leaving it slightly damp.
• After this, the area must be thoroughly wiped. It is not dried or wiped dry. The mixture will create a protective film.
• When removing dirt with a vacuum cleaner, you need to act very carefully so as not to damage varnished surface. To make parquet shine, you can wipe it with mastic. But it is recommended to do this after careful processing.

Floor tiles

In the bathroom or kitchen, in most cases the floor is covered with tiles. After repairs, debris gets into the joints and also forms a plaque.

Causes great harm lime plaster, which not only crumbles, but also leaves marks. To clean the tiles, use special substances for ceramics.

Cleaning is carried out in four stages:

1. One bucket uses about 100 ml of product, which must be mixed well.
2. Wash in several approaches, constantly rinsing the rag.
3. As soon as the water becomes cloudy or dirty, it should be replaced.
4. We do not recommend wiping a well-cleaned surface dry, otherwise the mixture will not leave a shiny film on the tile.

It is not necessary to buy expensive detergents; it is enough to use a soap or powder mixture.

You can remove it with vinegar serious pollution eg lime deposits.

Advice! Cheap way to give the tiles brightness and shine - use a solution with lemon juice.

To summarize the entire article, it can be noted that the main requirement for cleaning the floor from construction dust is the selection of methods depending on the type of surface.

Products for cleaning any coating are presented wide range, but you can also use improvised materials. The main goal is “Do no harm!”

The long-awaited, but still bringing a lot of trouble and inconvenience, repairs are behind us. All that’s left is to remove the construction waste and thoroughly wash the floor. And then the problem arises of how to clean the floor after renovation, because whitewashing, painting, plastering, and just construction dust Not suitable for every detergent. In this review you will find answers to all the questions that arise in the process of cleaning floors, tips that will greatly facilitate the work and help achieve an impeccable result.

How to clean floor tiles after renovation

Method 1

The following homemade bleaching agent will whiten the seams between the tiles, and also refresh the tiles themselves:

• Prepare 10 cups of water in a deep enough container, as the mixture may react and rise for a while;
• Add ½ cup of soda and 1/3 cup of lemon juice to it;
• Pour in ¼ cup vinegar;
• Mix, put on gloves and wash the tile floor with the solution.

Method 2

Ideally washes tiles after repair from dust, dirt, glue, as well as those contaminated over time with Stork Sanox gel.

• Put on gloves, apply the gel to the sponge, and then to the tile;
• The action of the product is immediate, so it can be washed off almost immediately clean water and enjoy the result.

Method 3

It will not be difficult to wash off construction dust from the tiles. Water with lemon or vinegar, glass cleaner, and even ordinary soapy water will perfectly clean and add shine. But with adhesive solution, especially dried ones, are more difficult to cope with. First you need to soften it.

• Moisten the adhesive stains on the tiles with a mixture of water and vinegar, or water and ammonia (you can also use acetone, after testing it on a small area to avoid the risk of damaging the tiles);
• The softened glue can be scraped off with a stiff sponge or scraper.

Method 4

The hardened primer can be washed off with acetone, or you can purchase a special remover that includes a solvent. The principle of operation is similar to the previous option.

• Apply solvent or acetone to the primer stains;
• Once they have softened, remove them with a glass scraper.

Method 5

You can get rid of acrylic primer from tiles in this way:

• Wet a towel and place it on the stained surface;
• Keep it moist for several hours by sprinkling with water;
• Once the soil has swelled, it can be gently cleaned with Pemolux and rinsed off with clean water.

Method 6

Paint stains on tiles can be easily removed with products such as Mole, Pufas Abbeizer or regular acetone. As an option - liquid glass. When it turns into a film, it is easy to peel off along with the paint.

Method 7

Cement residues on tiles can be removed using Atlas Szop, Milizid, or an effective mixture of vinegar, citric acid and Domestos.

It is much easier to remove any contamination immediately after it gets on the tiles, before it hardens.

Method 8

If you don't know how to clean grout from tile floors, experiment with the following methods and products, keeping in mind that smooth glazed tiles can be cleaned well with a dry cloth, followed by water and detergent. Matte glazed – with an acid-containing substance.

• A mixture of oxalic acid and water washes the grout;
• Table vinegar, can be diluted with water;
• Acid-containing substances will help, for example, “Deterdek”, “Litoclean”;
• Cleaning product "Cinderella";
• You should try gasoline, acetone, and white spirit.

How to remove whitewash from the floor after renovation

Before whitewashing, the floor must be covered plastic film. But, if the floor is already dirty, there is no reason to be sad, since there are many ways to clean the floor after repair, in particular whitewashing, taking into account the degree of its contamination.

Method 1

The most popular, easy and affordable option.

• Fill a suitable container with water and add it to it vegetable oil, (100 g of oil per 10 liters of water);
• Wash the floor with this mixture, pour out the water;
• Fill the container again with clean water and pour 1 tbsp into it. vinegar;
• Rinse the floor with this mixture;
• Finally, wash the floor thoroughly with clean water.

Method 2

It’s even easier to use any dishwashing detergent to remove whitewash.

• Dilute dish soap in water and wash the floor;
• If necessary, repeat the procedure several more times.

Method 3

The method is effective, but it won’t be limited to one-time washing; it will take 3-4 or even more times.

• Dilute vinegar in water (200 ml of vinegar per 10 liters of water);
• Wash the floor thoroughly;
• Change the water and rag and wash again to the desired result.

Method 4

• Wash the floor with clean water;
• Dial again clean water and dissolve table salt in it (5 tablespoons of salt per 10 liters of water);
• Wipe the floor with salt solution;
• Change the water, add vinegar to it (200 ml of vinegar per 10 liters of water), wash the floor;
• The product will rid the floor of whitewash.

How to clean plaster from a floor after renovation

As a rule, most often used gypsum plaster, then cement. Gypsum plaster hardens quickly, so it should be washed off the floor as soon as possible. In fact, gypsum is chalk, so all of the above methods of washing whitewash from the floor will help. Also effective chemicals, for example, "Atlas Szop", "Plitonite wash". Additionally, try removing gypsum plaster using the following method:

• Remove large pieces of plaster with a wooden or plastic spatula;
• Clean the floor with a dry cloth;
• Dampen the cloth and place it over the plaster stains;
• When the plaster gets wet, it can be washed with vinegar or oil, as is the case with floors after whitewashing.

Cement plaster is removed in the following ways:

• Pour acetic acid onto the cement stains;
• 5-10 minutes after it dissolves, wipe off the residue with a dry cloth.

Concrete cleaners and solvents will also help: “Lepta Himfrez”, “Lugato Zementschleierentferner”, “Bio Decap" Beton Guard".

Important: always read the instructions for use carefully chemical substances. Their safety does not apply to all types of floor coverings.

How to clean linoleum after repair

The vast majority of tips presented on how to clean a floor after renovation, depending on what exactly it was contaminated with, are also effective in this issue. But, in the case of linoleum, it is important to consider the following points:

• Do not use soda, alkali and other abrasive substances so as not to scratch the coating or make it brittle;
• Do not wash linoleum with too hot water;
• When cleaning linoleum, avoid using alcohol, including ammonia;
• Apply gasoline, turpentine, kerosene only to stains;
• Always test even the most vaunted product on a small and inconspicuous area of ​​linoleum. Otherwise, there is a risk that the design will be washed off and the coating will become rough.

How to clean a laminate floor after renovation

Laminate flooring today occupies a leading position. This is a beautiful, stable and expensive coating, so it’s difficult to resist noticing that before repair work It is very important to take proper care of it and protect it from contamination. But, if a mistake has already occurred, the following tips will help eliminate the problem.

Method 1

If the laminate is stained with paint, alcohol, white spirit or acetone will help to remove it:

• Remove large debris, vacuum small debris;
• Apply the product to a cotton swab and treat the stain;
• Wipe the treatment area with a damp cloth.

Important: laminate floors are washed when minimum quantity water. After washing, wipe dry to avoid swelling and deformation of the joints.

Method 2

Dirt and dust are easily washed off with dishwashing detergent added to water. You only need to use soap suds or wring out the rag as thoroughly as possible. If there are stains, you can wash the floor with water with vinegar added to it (for 10 liters of water - 1 glass of vinegar).

Method 3

Splashes of whitewash on a laminate floor will be removed by window cleaner, after which the floor is wiped soft cloth. Also effective in this case are vegetable oil, salted water and a vinegar solution.

Method 4

Dirty in polyurethane foam the laminate will wash off medicine- Dimexide. The drug should be used in a ventilated area due to its strong odor.

• Soak a cotton swab in the product and place it exclusively on the stain;
• Leave on for 10 minutes and rinse off.

Method 5

You can also help restore a beautiful appearance and remove stains. purchased funds, specially designed for laminate care. These are “Pronto for cleaning wooden floors”, “Mellerud BIO”, “Emsal Laminate”, “Mr.Proper”.

How to clean a varnished floor after renovation

How to clean a floor after renovation if the coating is varnished? Try it the following options processing.

1. Oil paints on the floor are treated with white spirit. The main thing is to apply the product directly to the stain. After treatment, the floor is thoroughly washed and wiped with a damp cloth soaked in a solution of 10 parts water and 1 part glycerin;
2. A mixture of 5 liters of water and ½ cup of salt will help remove whitewash or plaster. The composition cleans the floor well without leaving marks or streaks;
3. Also, the varnished floor is washed with a mixture of 5 liters of water, 0.5 tsp. potassium permanganate and 1 tbsp. vegetable oil.
4. Special cleaners are used for varnish coatings: “Bona Wood Floor Cleaner”, “IRSA Aqua Star R9”.

How to clean floors after renovation without streaks

• It will help to eliminate stains on linoleum floors laundry soap. A small amount of it is added to water, which should be changed very often, and the rag should be constantly rinsed and squeezed thoroughly;
• Laminate floors are washed warm water with vinegar. The acid evaporates moisture, so there are no streaks left on the washed floor;
• Marble floors are not washed with soap or powder; it is best to use only warm water, adding a product with a neutral pH, for example, InterChem 501.
• When washing tile floors, add ammonia to the water, citric acid, vinegar essence, window cleaner.
• A mixture of water with the addition of a small amount of kerosene and table salt gets rid of stains on the floor.