A luminaire on a bracket is an indispensable attribute of an organization street lighting in the dark. In the production of brackets specially for LED street lighting fixtures, steel pipes are used, which are additionally decorated with various details, which simultaneously ensure the strength of the product, ease of carrying installation works, functionality, resistance to adverse natural phenomena.
Metal brackets depending on design features, fastening methods are divided into the following categories:
- brackets for street lighting fixtures, the installation of which is carried out on supports made of steel pipes or conical supports. Some product variants are installed on supports made of reinforced concrete. These include, for example, attachment models for console lighting fixtures that are fixed to the support by means of bolted clamps;
- wall-mounted options for outdoor lighting fixtures to be fixed directly to external wall surfaces building structures... Such products can have both functional purpose and decorative. For example, they can be used to decorate the entrances of buildings, the entrances of residential buildings and other objects.
Design features
For the production of products, metal pipes are used, the diameter of which is 4.8 cm. You can order products completely made of steel pipe with a diameter of 5.7 cm or from a steel pipe with a diameter of 5.7 cm with an adapter for landing a console illuminator by 4.8 cm.
The diameter of the connecting section of the bracket with the base of the lighting device is 4.8 cm by default. Depending on the model of the lighting device, the landing dimension may vary according to the required parameters.
According to the number of seats for illuminators, the attachment brackets can be single-track, multi-track (2-, 3-, 4-horned).
Swivel horn angle for multi-track models:
- unidirectional horns - 0 degrees (located one above the other);
- multidirectional horns - 180 degrees (located opposite each other).
The default angle of the bracket is 15 degrees relative to the horizontal axis. The horizontal angle can be changed from 0 to 90 degrees as required.
All bracket models are hot-dip galvanized.
Important! The zinc coating provides the products with corrosion resistance. To make them decorative, they are additionally painted with powder paint or primer enamel.
Before ordering decorative brackets for street lighting fixtures, it is important to check with the manufacturer all the details of the project, on which the choice of product parameters will depend. 
Brackets for illuminators ZhKU, RKU
Fixation of lighting devices for housing and communal services, RKU to each specific base is carried out by means of specialized brackets that have structural differences, their own installation technology. Regardless of the models of lighting equipment, they all have common technical characteristics, thanks to which the developers were able to derive certain standards for the installation of lighting modules.
The norms are expressed by the fact that, regardless of the version of the lighting device, there must be a special hole in the housing for the steel pipe (fittings). The device is fixed by means of special clamping devices. The variation of installations lies exclusively in their design, and the modular part to which the lighting device is fixed is always the same. Therefore, the installation remains versatile.
Execution, appearance of products in to a greater extent depend on the conditions of their further operation, the purpose of fixing lighting devices for lighting external areas or rooms. Such modules are usually made of steel, coated with a special paint that is not afraid of temperature extremes. In many cases, lighting equipment is used in open areas, as a result of which its metal body is most susceptible to corrosion.
Important! Monitor the presence of paintwork on the surface of the product in order to prevent metal corrosion and, as a result, premature replacement of the installation.
From lineup brackets offered on the market today can be divided into the following categories, differing in their intended purpose:
- Universal... The units are equipped with flat bases, they can be fixed on any surfaces by means of bolted connections. Perfect for indoor installation.
- Pole mounts... Found wide application in the arrangement of lighting for highways, city streets. Their distinctive feature is that the lamp is located at a considerable distance from the support.
Important! When buying decorative brackets for street lighting fixtures, it is necessary to clearly know the technical task of the installation, since all such models differ in technical and operational characteristics.
PFK Promsnabresurs LLC produces high-quality metal structures from proven raw materials, which ensures reliability and durability of all products. The range of brackets presented in the catalogs of our site is able to provide a solution to a wide variety of lighting problems that our clients may face. You can order as double bracket ,
so and single, being confident that we will fulfill your order on time and in full. We are able to provide orders of any volume due to close cooperation with reliable suppliers of raw materials for the production of high-quality metal structures.
To meet any needs of our customers, the designers of our company offer a wide variety of designs to choose from. different kinds brackets.
So the console bracket is presented in several versions, which allow fixing the fixtures on the supports. of various kinds and various standard sizes.
When arranging street lighting, lighting highways, avenues of large cities, the choice most often arises: install a unidirectional bracket or a multidirectional bracket. On our site are presented different options unidirectional and multidirectional brackets, on which a different number of luminaires are installed (usually from two to four). When calculating the intensity of street and main lighting, specialists need to take into account many factors, but we, in turn, try to do so as to make it as easy as possible for them to implement the approved lighting project.
The attachment bracket is used most often, since it is the most versatile and can be mounted on almost any support, regardless of material and geometric parameters. Also, such brackets are used to fix lamps on the wall or on wooden and concrete pillars, any vertical surfaces using special clamps.
In order to maximize the reliability and durability of metal structures, our company uses proven types of protective coatings: enamels, powder paints, galvanizing.
Today the galvanized bracket is especially popular. The thing is that this way protective coating ensures the durability of products and prevents the appearance and spread of corrosion of the most long time... This coating is incredibly resistant to natural, physical and chemical influences, it easily tolerates aggressive environmental influences.
The support bracket must meet many requirements, which impose on it not only the design features of the lighting structure, but also physical properties materials, weight and shape of fixtures, weather and chemical conditions areas where the lighting structure will be located.
Today, in the conditions of fierce competition between enterprises engaged in the production of metal structures, a manufacturer who respects himself and values his customers strives to do his best to ensure that the products of his enterprise are not only competitive, but also stand out favorably against competitors due to the terms of purchase and special offers... That is why our company pays increased attention development of new structures that would meet the modern requirements of builders and architects. We are constantly developing, mastering new technologies, providing the enterprise with modern equipment, without which the task of achieving High Quality just impossible. We pay great attention to training our own specialists who understand the degree of responsibility assigned to them by the company's reputation.
The company "Promsnabresurs" guarantees that all products of the enterprise meet the highest international standards.
Contact our managers and discuss all the details of the order. We guarantee its implementation with high quality and on time
Since the discovery of fire, and subsequently electricity, lighting has become an indispensable part of life. modern man... But it is not enough to light only your house, because a person spends some of the time on the street, and this is not always the daytime. For this, they came up with lighting poles. Moreover, any support is not monolithic device, but consists of several parts. They include elements for attaching the light source - a bracket.
What is Lighting Pole Bracket
A bracket is a light source fixing element that allows you to give the light the desired intensity and angle. It depends on the type or configuration of the bracket how well or poorly it will be illuminated. required area... There are many types of mounts available to meet these challenges.
Appointment of brackets for lighting poles
The main purpose of these elements is to mount the light source on a support. After all, everyone understands that just a lamp strapped to a pole will not be a sufficient solution, and the useful functionality of such a light will be minimal. To increase the efficiency of street light sources, special "shades" were invented, inside which reflectors are installed. It is they who collect the light beam, diverging in all directions, and focus it in the direction that you want to illuminate. And only "plafonds", in turn, are installed by means of brackets on the lighting mast.
Types of brackets and their design features
A huge variety of these fasteners are currently in use. It all depends on the mounting methods, type of lighting fixture, number of horns, lighting angle, support height, bracket overhang and other parameters.
The most common are one-, two- and three-arm brackets, as well as a T-shaped bracket for installing spotlights and a floor lamp for attaching a lighting fixture on top of a support. The first three types, in turn, are divided into radius, having a smooth transition at the bend, and angular (bend at right angles).
Also, the brackets are divided according to the type of landing on the lighting support. In this case, 4 main types are distinguished:
- with seat"Shell", which is suitable for all types of tubular supports;
- with seat "flange", used for tubular and faceted types;
- an additional bracket that is attached to the side of the lighting pole or to the wall;
- a floodlight bracket that has many types of attachment, depending on the customer's requirements.
Method and materials for the manufacture of brackets
Currently, the most common material for making brackets is regular or galvanized iron. The choice of material depends on the customer's requirements. For street lighting poles used on public roads, the galvanized version is more often used. This solution contributes to the durability of the structure, which can "live" for several decades and does not require any additional maintenance.
In turn, for brackets used in private summer cottages or adjoining territories, iron brackets can also be used. Such elements are treated with anti-corrosion impregnation and painted in the desired color, which makes it possible to bring to life any design solution.
Most often, brackets are made of rolled iron on special bending or forming machines with program control, which makes it possible to produce brackets in large quantities and different forms... Separately, also on machine tools, fasteners are made for these elements. And at the end of the production line, they are combined. Searchlight brackets are made of two various elements- it can be both round and T-shaped beams, connected at right angles.
Scope and installation methods
Depending on the type, brackets are used to provide various kinds of street lighting. For example, the combination of a high support and a bracket with a projection of 1.5 meters, regardless of the number of horns, is the most common solution for street lighting in places. common use... In this case, use multi-track brackets with different angles reversal between the horns. Thus, it is possible to achieve maximum light coverage of the entire area around the support. Double-arm brackets with an angle of 180 degrees between the horns are used to illuminate the carriageway and sidewalk adjacent to it. For these purposes, "shell" or "flange" fasteners are used. Their only difference is in the form of attachment. The "flange" has a faceted shape, ideally suited to typical lighting poles.
Some part of the bracket goes deeper into inner space support and is fixed by means of bolts inside the support in two places or by means of a console - on the outer ring of the support post.
T-shaped brackets are very often used on adjoining and summer cottages for maximum illumination in only one direction. Such brackets have found their application on special vehicles equipped with a generator, for use in places that are dimly lit or unlit at all.
The single-track attachment brackets have also found their way into applications where circular lighting is not required. They can be attached to the wall of any building with screws, self-tapping screws or nails and effectively use light in only three directions, without illuminating the wall.
All of the above gives a clear understanding that without brackets, the lighting support is just a pole that will not carry useful functions... And only after installing the brackets with lighting fixtures, it will be possible to obtain a complete and functional element.
Our offer
The lamp on the bracket is an indispensable attribute of the improvement of streets and illumination of territories at night. The bracket for the lantern is made of metal pipes and decorative elements, which provide the structure with strength, functionality, ease of installation, as well as resistance to adverse weather and climatic factors.
Depending on the design and options for fixing the luminaires, the brackets are divided into:
- brackets for lighting poles, which are installed on metal tubular or conical poles. Some types of brackets can also be installed on reinforced concrete supports, for example, attachment brackets for console lamps, which are attached to the support using clamps and bolts;
- wall bracket for outdoor lighting fixture, which is attached to the walls of buildings or structures. This type brackets can be designed for both functional lighting and decorative design entrances and entrances to the building.
One of the activities of the company "A-zavod" is the production and sale of metal structures for outdoor lighting. If you want to buy a bracket for a console lamp, contact the manager of the company to place an order, clarify the availability of goods in the warehouse, the terms of production and delivery of the order.
Installation of luminaires RKU and Housing and communal services, to any surface is made with the help of special brackets differing from each other in structure and method of fixation. Despite the fact that there is a large number of various models of lamps, they all have some common technical characteristics... This made it possible to develop standards regarding the installation method of the light modules.
These standards are expressed in the fact that whatever the luminaire is, there is a hole in its body into which a pipe or fittings are inserted and the installation is fixed with clamps. Variation brackets occurs only in terms of their execution, and the side of the module on which the lighting fixture always the same, so that the installation retains its versatility.
The appearance and execution of the brackets largely depends on the method of their further use, and the tasks that they will perform in relation to fixing lamps for lighting a room or object. Basically, these modules are made of metal and coated with paint that can withstand temperature differences. As a rule, in most cases, luminaires are used in open areas, so the body of the bracket is subject to metal corrosion. A person must constantly monitor paintwork installation to prevent metal destruction and premature failure of the bracket. It is possible to single out from the entire model range of installations some series that have different target purposes, namely:
1. Universal brackets. This kind The unit is equipped with a flat base that can be bolted to any surface and is well suited for installation inside buildings. Also at the base of this module there are holes for fixing metal ties, with which you can install the bracket on a post or other support, not very large in diameter. In such a modification of the installation, the user, as a rule, can fix a pipe of various lengths to the base of the structure. Thus, the distance from the surface of the plane to the luminaire is regulated, which in turn determines the propagation luminous flux emitted by the lamp. The base of the installation, into which the tube for the light module is fixed, in some modifications can change its position relative to horizontal or vertical placement, which allows you to adjust the placement of the luminaire.
2. Structures for stationary fastening to supports. They are widely used to create lighting on highways, highways and streets. There are many options for these brackets, hallmark which is long distance the lamp from the support. Such brackets allow installing from one to three luminaires on the lighting mast, and their location can be on one side or opposite to each other. This type of module is perfect for supports that are placed between two roads.
When using brackets, the user must have a clear understanding of the technical challenge, since there is big choice models of these installations.