If you have a couple of free evenings, then why don't you do the manufacture of crafts for the kitchen and at home? After all, do it yourself from the primary, natural and even cutting materials You can create a bunch of useful or just beautiful trifles. In this material we presented 50 inspirational photos and 12 super ideas with step-by-step master classes In the manufacture of decor items, storage accessories, kitchenware and not only.
Idea 1. Stand for cutting board tablet
Watch your favorite TV series on the tablet or prying the book of recipes during cooking will be easier if you do a special stand from ... ordinary cutting board. Making this kitchen craft will take more than two hours, and it will be used every day.
To make the holder for the book of recipes or tablet you will need:
- You can take an old cutting board or buy a new one (the best wooden one, but is suitable and bamboo). Its size should be not much more or less tablet.
- A small wooden plank, and a better molding fragment (it will keep the tablet / book).
- Another tree bar or plywood, from which you can cut a sharp triangle;
- Paint or brown color desired, for example, in tone table top, facades or kitchen apron ;
- Tassel for painting or vehicle for sea;
- Lobzik or saw;
- Car glue or any other glue of strong fixation.
Instruction:
- With the help of a saw or jigsaw, shorten your bar or molding to desired size (on the width of the board), polish the edges emery paper, then just get the board at the bottom of the board.
- Cut from a piece of wood with a support for a stand in the form of an acute triangle with a straight angle as in the photo below and also stick it.
From the tilt of the hypotenus of the triangular bar will depend on the angle of inclination of the holder
- Color all the workpiece, following paint manufacturer instructions and leave dry.
- If desired, the handle of the resulting stand can be decorated with a jute rope or ribbon. Thus, when the stand will not be needed, you can hang it on the hook.
Also, the crawler can be additionally decorated - for example, artificially create as in this master class, draw inscriptions, burn the drawing, cover the stylist paint. In the next selection of photos, you can learn the ideas of the decor of the original cutting boards.
Idea 2. Stands under the dishes from jute
If your kitchen (or for example, a country or summer kitchen) decorated in a rustic, Mediterranean, rustic or maritime style, then you will probably like this idea of \u200b\u200bkitchen crafts. Literally in a couple of hours you can make your own hands under the plates for the whole family and guests.
For the manufacture of one substrate with a diameter of 33 cm you will need:
- 10 meters of jute rope 1 cm thick (sold in construction and economic stores);
- Hot glue pistol;
- Scissors.
Instruction:
Just start turning the rope in a circle, alternately missing glue small sites And fixing them for a while. When the mat will be shaped, cut the end of the rope and stick it.
Idea 3. Organizer for canteens and kitchen appliances from cans
Canned banks are worth nothing, but they are durable, easy to care, and their form is just suitable for storing all sorts of blades, cooks, forks, spoons and other devices. If you attach a little effort and creativity, you can make a convenient and cute organizer, which, if not fit into the interior of urban cuisine, then accurately takes on the dacha. And the organizer made with your hands from the cans can be used to store tools, tasters, markers and other little things.
Stand for spoons and forks from canning cans
To make such a stand for spoons and forks, you will need:
- 4 or 6 clean and dried tin cans without covers and burrs;
- Acrylic paint for metal or enamel paint (it will protect banks from rust);
- Multiple wood screws and screwdriver;
- Fat nail and hammer;
- Furniture handle or leather strap with accessories;
- Small wooden plank.
Instruction:
- Color banks inside and outside and let them dry for one day.
- If necessary, drink a wooden plank to the desired size, subside, clean and finally paint (not necessarily in the tone of cans).
- Take a nail and hammer and do a hole for self-pressing in all banks.
Tip: To facilitate this process and do not harm the paint layer, install a small bar of the bed with a clamp on the table, then wrap the block with felt and only then put on the bar of the bank (see in the next photo-collage picture in the lower left corner)
- Adapt banks to the plank and align them as they will be mounted in the future. Mark on the board the location of the holes in the pencil.
- Do small holes in the table on the place of the mark, using a hammer and a nail.
- Screw the screws in the opening of the first bank to attach it to the plank. Repeat the procedure with all the remaining banks.
- Finally, set on the end wooden board Furniture handle or leather strap with all the same screws. Ready!
Here are some other deco ideas and modifications of the construction support for appliances from cans.
Idea 4. Topiary for kitchen decor or house
Topiary is a small decorative tree, which are decorated with dining or coffee table, Dresser or fireplace regiment. And Topiary is an excellent addition to a gift, especially if you decorate it with a crown, say, candy or flowers. Making such a craft does not take much time, does not require the use of expensive materials and even beginners die. Having mastered the basic principle, you can create topiaries for any occasion, any forms and designs. Take a look at our selection of photo ideas of the homemade decor of the house, for sure, you will like something!
Kitchen Decor Idea for Halloween
For the manufacture of crafts you will need:
- The basis of foam, plastic or floral foam in the shape of a ball or another desired form;
- Barrel (smooth tree twig, pencil or any other small stick);
- Decorative elements for creating crowns: Coffee beans, artificial flowers, cones, color beans, etc.;
- Decor for disguise filler pot, for example, moss, pebbles or sisal fiber;
- Flower pot;
- Filler for the pot, which will fix the trunk. For example, suitable cement mortar, the same foam or alabaster (the best option);
- Thermo glue in a gun;
- If necessary, you will need paint to decorate the trunk, the basics or pot. Also, the trunk can be decorated with ribbon or twine.
Basic instruction:
- To begin with, it is desirable to paint the base in the color of the crown elements so that possible is not visible. You can also paint the trunk and pot and leave them to dry.
- Cut at the bottom of the crown hole under the trunk of a depth of a couple of centimeters, fill it with glue and fix the trunk.
- Take the base of the crown and start the piece of decorative details. The principle of action at this stage is simple: large parts are glued, then the middle and, finally, the small elements fill out properly. It is necessary to glue the decor quickly until the glue has absorbed the basis.
- Instruct the mixture for fixing the trunk in the pot according to the manufacturer's instructions and fill it with a pot, not reaching a pair of centimeters to the edge. Next, insert the trunk, hold it a bit and then leave to dry for a day.
- Disconnect the filling the pot with decorative "cover" (you can fix a little on the glue).
Idea 5. Serving Tray Board
But the idea of \u200b\u200ban unusual serving tray board, which, although it is not a cutting (designed to lay out products only in the dishes), nevertheless can be very functional. For example, it can be used for a beautiful feed to the table of snacks to drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Due to the styling part, until the board is applied to the destination, it can be simply hanging onto the wall and use for entries.
For the manufacture of this kitchen craft, you will need:
- Board wooden thick 5 cm;
- Morid of the desired color (for example, in tone to the tabletop);
- Sponge, rag or tassel;
- Stole paint;
- Two furniture handles and wood screws for fastening them;
- Lobzik or saw;
- Screwdriver or screwdriver;
- Line, pencil.
Instruction:
- Cut your board to the desired size using a manual / electric saw or jigsaw. In this master class, the board has a length of 60 cm, but you can make it shorter or longer.
- Color your board by a verse according to the manufacturer's instructions and let it dry.
- It is time to paint the inside. To do this, first glue the paint tape on the edges to limit the painting zone. Next apply still paint (In this case, paint is used in the cylinder) and let it dry.
- Screw knobs on the edges of the board.
You can replace furniture handles on leather belts, paint the board in bright color, burn the drawing on it or attach two "legs" to its reverse side.
Idea 6. Stand under mugs and glasses
If you feel about the type of people who collect wine stoppers (just like this or hopelessly to make something useful from them), then you will like this idea of \u200b\u200bthe crafts.
To make one stand under the mug you will need:
- 8 plugs (respectively, for the manufacture, a set of 4 stands will require 32 traffic jams);
- Roll cork board, rug or coasters under the plates (for cutting the base of the cup holders);
- Hot glue;
- Twine.
Step 1. Spread your plugs pairly in the square format, as shown in the photo below. Using hot glue, apply a strip of glue between two corks and press them with each other for 30 seconds. Repeat the procedure with all other couples.
Step 2. From a sheet plug (board, rug) cut a square corresponding to the size of the future stand. Next, apply thermo-glue on it, wait 15-20 seconds. And glue your billets.
Step 3. Fill the gaps between the corks with glue and let it dry. For a better adhesion of glue with traffic jams, you can put any press on the workpiece.
Step 4. Watched the craft to the twine and tie the knot.
Stands for mugs, glasses and glasses, made with your own hands you can beautifully pack and give a friend
If you wish the stand, you can make round, triangular or hexagonal, cutting off the excessive knife.
According to the described principle, you can make your own hands and this is such a stand under hot. By the way, the old CD will be consolidated as the basis in this case.
Idea 7. Wall panel
Another idea of \u200b\u200bcrafts for home and kitchen, which can be made with your own hands from wine traffic - Wall panel for decorating interior and storage of notes, memorable photos and postcards.
Panel from traffic jams in the frame from IKEA
To work, you will only need beautiful frame (from picture or mirror), paint desired color, hot glue and a big pile of plugs. Corks can be laid out the "Christmas tree", in checker, smooth rows and in other ways that you like. If necessary, for example, if there are not many plugs, they can be cut along or across. And so that the corks are easier to cut them, you need to soak in hot water for 10 minutes.
Others interesting ideas Making wallpapers with their own hands.
Idea 8. Universal knife holder
Stand for knives - very useful fit For a kitchen that helps contain workspace in order and longer to maintain the sharpness of the blades of knives.
Make a holder for knives with your own hands is very easy - it is enough to choose a small vase and fill it tightly with bamboo / wooden skewers, colored beans or ... color spaghetti, as in our master class.
For the manufacture of a stand for knives, prepare:
- Container or vase of the height of the blade of your largest knife. The form of the container can be any, but without any bends;
- Spaghetti, many, many spaghetti;
- Several packages of Ziplock big size (or just large packages that can be firmly tied in the node);
- Alcohol (for example, vodka);
- Liquid food dye of the desired color (or several dyes, if you want to make multicolor filling);
- Nitens;
- Aluminum foil or old adhesive tablecloth;
- Paper towels;
- Kitchen scissors.
Instruction:
- Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is filled, pull out spaghetti and add to this heap a couple more macaron beams about the reserve (in case of replenishing the broken sticks).
- Equally spread spaghetti by packages and pour as much alcohol in them so that it can moisten all the sticks. Next, add to each package of 10-40 drops of the edible dye.
- Seal or make your packages, then put them in extra packages to avoid leaks. Slowly shake and turn the bags to mix the dye with alcohol and pasta. Next, place the package on one side and leave for 30 minutes, then turn over the package again and leave it for another half an hour. Continue soaring spaghetti in this way (but not more than 3 hours) until they find the desired shade.
- Cover your baking sheet aluminum foil, then layer paper towels (either with a loaf). To protect your hands from staining, it is advisable to put on gloves. Remove spaghetti from the packages, pre-draining all the liquid, spread them on the counter in one layer and leave to dry. From time to time, Spaghetti must be sorting out for their uniform drying.
- As soon as your spaghetti is completely dried, start laying them into the container.
- Shake the filled container and dissolve spaghetti. Insert your knives to determine the optimal filling density, add pasta or remove excess if necessary.
- Now, with the help of kitchen scissors or other very sharp scissors, cut spaghetti to the desired length, without removing them from the container (it is best to do it over the sink). It is important that Spaghetti does not exceed the height of the container more than 2-3 cm, otherwise they will quickly break.
Idea 9. Jars for storage of spices and bulk products
Today we will tell about the express technology of manufacturing a basket of paper, which can be used for storing small things (keys, stationery), yarn, as well as for unusual feeding fruit, easter eggs, bread or baking to festive table or as a gift.
Weaving such baskets can even children quickly and easily
You will need:
- About 15 sheets thin paper A3, cut halfway along sheets (it can be paper for the printer, a list of newspapers in full reversal and even bakery paper);
- Capacity suitable size with straight walls (for example, a bank from under jam);
- Glue in stick;
- One shat;
- Paint in the canister (optional).
Instruction:
- Starting from one corner, start tightly tightly fold the sheet of paper around the ships to a diagonally opposite angle so that the tube is flat and long. When the tube is ready, add multiple glue smears to the paper corner to fix it in place and pull out the skewer. Do the same with all the remaining sheets. In this master class on weaving 2 baskets it took 30 tubes.
- If necessary (for example, if you used newspaper sheets) or, as desired, paint the tube acrylic paint.
- Take even number Tubes and connect them together as shown in the photo in the upper left corner. In this master class for a basket of size with a jam from under jam, it took 6 tubes, for a bigger basket - 8 tubes.
- Start weaving: Take one of the outer tubes (which is under the grille), and launch it on top of the adjacent tube, then let it under the next tube, then release the tube on top of the subsequent tube, etc. Continue the weaving raising already accused tubes vertically (now these tubes will be called racks).
- When 2-3 cm remain from the first working tube, increase its length. To do this, apply glue to a new tube and insert it into the remaining "tail". Continue weaving again and again, adding paper tubes as needed.
- As soon as you put the base of the desired diameter (the same size as the container), put the container on it and start the weaving around it, pulling the tube-rack close to the walls.
- Up with a basket to the end, remove the jar and carefully wrap the end of the working tube into weaving.
- Wrap the ends of the racks inside the weaving and do hardness if necessary. Next, you can spray the paint from the canister as in our master class.
Idea 11. Wall Mount Holder for Towels and Kitchenware
From an ordinary grater you can make this comfortable and beautiful holder for towels and storing kitchenware or even alive or artificial plants.
From a flat grater, you can make a decor for the kitchen in the power of country, Provence or Shebbi chic
For the manufacture of a heated towel rail and tray for the smallest things you will need:
- The grater (preferably old, but the usual new grater is also suitable, the main thing is that it is metallic);
- Patina for metal (for artificial arrangement of grater);
- A small cutting board or just a wooden board;
- Wooden plate (for the bottom of the grater);
- Glue.
Instruction:
- Following the manufacturer's instructions. Cover the grater of the metal patina, for example, in green as in this master class.
- Install the wooden bottom in the inside. It must be pre-cut according to the size of the top of the grater. As a rule, at the top of the grater there are protrusions from metal handles, it will be on them that will be attached.
- Screw the grater to the chalkboard on the tapping screw, after having done the holes in it with a nail and a hammer.
- Install the board on the wall near the sink, hang a towel on the handle, inside your blades, cooks or flowers.
Idea 12. Flower Vase
Glass bottles of wine, milk or other drinks are almost ready-made vases that are just waiting for paintings acrylic paints and / or trimming.
Stand for plates is convenient if you are not very big dinner table. You can put two plates on it and placed one more under the stand.
Necessary materials:
- Wire thick 3 mm and 1 mm
- Kruglogs
- Kusachachi
- Long Hubbles
Take two wire segments with a thickness of 3mm and a length of 55 cm. Bend the seal of the semicircle.
Connect both segments and wrap in a wire with a thickness of 1 mm. The length of the wound area is about 5 cm
Generate the ends of segments in the form of a spiral
Cut two pieces of wires of 13 cm and bend in the form of the letter S, with the spirals twisted in the spiral, as in the figure.
Attach S-shaped elements symmetrically over the sides of the future stand. Secure with a wire with a wire with a thickness of 1 mm.
Cut the four pieces of wire with a thickness of 3 mm long 25 cm. With the help of pliers, make a few turns of the wire around the legs of the stand and fasten well to do not go down
Secure the wire on the other side of the stand. Get the distance between the right and left legs is equal to 18 cm. Cut an excess wire.
If you scrupulously select every thing in your home, then even the smallest detail you pay a lot of attention. These stylish stands under the hottest hand perfectly fit into your modern interior. Because today it is extremely fashionable to use the maximum of natural and natural materials. These are precisely the true twine and cork material.
Make stylish stands will not be much difficulty.
Before work, besides the twine and cork material, you need to cook a knife and hot glue.
You can use old cork mats for the mouse as the basis.
So, draw a circle on the basis and cut out. Make a small notch in order to hide the end of the rope.
Starting from the edge, glue the twine on the spiral, until you reach the center.
Such coasters can be relatively little size For glasses and cups. And can be more larger - for plates, and maybe even a saucepan and pan.
Make at least six identical coats under the plates. When guests come to you, use them for serving the table, it should turn out very interesting and creatively.
At the request of the twine already in ready product You can paint in any color that is most suitable for your interior.
However, still special charm of this kind of crafts in the raw materials of natural materials.
The decision will remain for you - be creative!
Each hostess seeks to ensure that her kitchen is originally framed and beautiful. Especially if the hostess has creative skills, then with the design kitchen interior There are no problems at all. In modern stores, a very large and rich selection of different kitchenware, among which are also quite unique and unusual things of factory production, but all this is somehow standard and familiar. But to create something in the original performance is quite interesting and interesting. Decoupage In modern times, a very popular needlework technique, thanks to which the most diverse interior items are decorated, especially the kitchen.
The range of goods for the decoupage is simply diverse, so if you have to upright fantasy to them, you can get a chic result.
Your attention is a master class in the technique of decoupage - creating a coach for hot plates. What we need for the manufacture:
Two blanks of 15 sizes 15 cm - I have a blank from an organity.
Napkin for decoupage with a pattern of kitchen topics.
Glue for decoupage, glossy acrylic.
White acrylic paint.
Kitchen sponge.
PVA glue.
So, proceed. We drag the tank with the glue, so as not to blur, put the blanks on the table. Kitchen sponge omit in white paint.
By tangent, as if fooling movements, paint the blanks the first layer of paint. Leave somewhere for forty minutes to dry the first layer.
Gently check whether the paint dried - the surface should be completely dry. Then be coated with the second layer of white paint.
Two layers of white paint, as a rule, enough for wooden and organic billets are quite sufficient, but if the surface is not fully painted, then cover another third layer. Let's try to dry. The second layer will dry longer than the first.
The process can be slightly accelerated, for this we drip the surface with a hairdryer. We turn over the scratched side down and now stain in the same sequence the other side, then in a circle we welt the edges of both billets.
Now she enhances the second side. When the blanks are completely dried, proceed to decorating them. We take a napkin, deploy it and stroke the iron. Stroke her better picture Down so as not to damage the drawing.
All napkins for decoupage are three-layer, so we remove the most upper color layer, only very carefully, so as not to break the napkin. Cut it in half.
One half of the napkins applied to the workpiece and, starting from the middle, wersing the adhesive mixture. Adhesive mix Pre-prepare from water and glue PVA (1: 1), mix in a small bowl.
The upper side was glued, wrapped the remaining napkin on the opposite direction, thoroughly scrolling the folding line.
Each person at least once in his life tried to collect a collection of some interesting things to him, for example, coins, figures or painted plates, which respectively belong to effective decorative elements. The same coins can be collected in the box, but it is better to set the beautiful dishes at the bottom. If you like to collect something like that, always buy original and unusual things to decorate your home, then you will certainly come in handy for their storage stand under a decorative plate. It is completely easy to make it easily, the main thing is to clearly follow the recommendations given in this article.
In order for you to get high-quality and reliable stands for decorative plates with your own hands, then first of all prepare the necessary materials:
- For the manufacture of lateral walls, a plate with a thickness of 1.5-2 cm and 8.5 cm wide is suitable.
Important! Their form may be rectangular or winding, but in the second case you will need to work with wood and special tools.
- In addition to the sidewall, you still need to be the base, that is, the shelf, which can be done from a thick material, for example, a 2 cm thick boards and 6 cm width.
- We use the rods to maintain plates that can be done from cuttings intended for garden tools.
This will require these actions in a clear sequence:
- Decide with the size of the shelves. All calculate so that their width allows you to place required amount Plate.
- Spile the shelves, make in them in the middle one at one deepening.
- Drink the sidewalls, also make holes for installing shelves and rods.
- Collect all the details so that the edges turn out to be rounded.
- Collect the design, not forgetting about the plank to attach the shelf to the wall.
- Fix it at the level of the highest crossbar, opposite it. Before this, make two holes in it to attach the shelves to the wall.
Important! Such walls should be done for each crossbar, so that the plates do not rest in a naked wall.
- Cover the finished shelf with several layers of high-quality varnish and hang it on the wall.
Important! If there is a desire, you can decorate the stand with beautiful patterns or carvings.
A rather original and beautiful stand under a plate with your own hands can turn out of cardboard and felt. In addition to the main materials, it will also need a hot glue gun and braid.
Important! The form of the product directly depends on your imagination, it can be suitable or simple. It is better to draw yourself a sketch on paper to use it as a sample.
Perform work on the following scheme:
- Draw on the cardboard the workpiece, it is better to translate it from paper. Its dimensions directly depend on the size of your decorative plate.
- Transfer carefully drawing to the felt, then cut two such blanks.
- Via adhesive pistol Enclose felt on both sides of the obtained cardboard billet.
- Using a braid and a hot gun to reorganize the edges.
- In the center, bend the workpiece and glue the strip from the braid corresponding to the length of the product.
It's so easy to make with your own hands an unusual, but beautiful stand, and no special knowledge for this have no need.
If you are just starting collecting dishes, you have only one wonderful plate, but you want to make her place in your kitchen to take her place, decorating it and adding it a kind of highlight, the next idea for sure you like it. Your new stand for a decorative plate is made with your own hands from the most ordinary cutting board. Such work will not take more than two hours, but its result will delight you daily.
Prepare for work:
- Board. You can take old or purchase a new, better wooden or bamboo. In size, it should be a bit less or more plates.
- You will also need a wooden plank and a small fragment to maintain the product.
- A small piece of plywood or wood to cut a sharp triangle.
- Morid or paint of the desired shade - better if it corresponds to the color of the facades, table top or kitchen apron.
- Freak for sea or brush for staining.
- Saw or jigsaw.
- Glue strong fixation.
Perform all the actions specified in this manual:
- Using a jigsaw or saws, shorterate a fragment or bar to the required size (according to the width of the board), edges pass the sandpaper, glue it at the bottom of the cutting board.
- From a piece of wood cut out the support for the stand so that in shape it resembles a sharp triangle with a straight angle. Then also stick it on the back side of the board. From the tilt of the hypotenuse of this bar directly depends the angle of inclination of the holder.
- Preparation Paint and let dry.
- Stand handle decorate a ribbon or jute rope if you want to hang the board on the hook.
Important! Such a stand can be interesting to decorate, for example, to form artificially or smear the drawing, draw something, cover the stylist paint.
These are such wonderful stands for the collection of their decorative plates, you can make from girlfriend, without leaving home.