Assemble a chandelier from a long sheet of paper. How to make a ceiling lamp yourself - ideas and advice

Ceiling chandeliers are lighting fixtures that perform two functions at the same time. First, they are used to organize the main lighting in the room. Secondly, devices are one of the main elements of decorative room decoration.

Numerous manufacturers offer equipment of different designs, but it is far from always possible to find something really worthwhile that fits into the overall interior of the room. In other situations, the cost of the chandelier you like may be too high. That is why many people are interested in how to make a ceiling lamp with their own hands.

Hand-made products will be unique and original, thanks to them you can express your taste and character. It is not so easy to make such devices on your own. The work requires a certain imagination and perseverance. On the other hand, a ceiling chandelier can be created from improvised tools and items that have become trash for you.

Choose any materials for making - wood, plastic, metal or glass. Chandeliers made of wine bottles, wooden skewers or straw look very original. To summarize: the choice of material for a homemade lamp completely depends on the imagination and idea that arose in the head of the owner of the apartment.

Varieties of lighting devices

The final stage in the implementation of any repair and construction work will be the purchase of lighting fixtures. Often, the main one is the ceiling chandelier, installed in the center of the room, subject to its correct geometry. There is a wide range of luminaires on the market that differ in design, shape, principle of operation and even the presence / absence of certain structural elements.

Today, all people strive to save money, so it will be important to use a chandelier under energy-saving or LED lamps. It is advisable to choose products with partially or completely closed shades in which lamps are hidden. Due to this, you will protect the ceiling structure and will be able to protect yourself in the event of a light bulb explosion (the fragments will remain inside the plafond).

If you still liked the chandelier with an open arrangement of bulbs, then inspect it and make sure that after installation the luminous flux will be directed downward. There is also a simple rule - the simpler the product, the easier the subsequent installation.

Another point to consider when choosing a chandelier is the purpose of the room and its dimensions. In spacious halls with high ceilings, volumetric pendant lamps should be installed. Space saving is required for small spaces, so focus on flat (flattened) options.

Conventionally, ceiling chandeliers can be divided into two main types:

classic hanging;
flat, placed as close as possible to the ceiling.

And the latter are divided into two subcategories - built-in and overhead. Overhead shades are considered the best solution for bathrooms, corridors and kitchens. The presence of a separating platform ensures their rapid cooling and high fire and electrical safety.

Recessed luminaires are also called spotlights. They are often installed (more correctly - built in) into furniture, suspended ceilings or arched structures. Manufacturers provide a wide variety of shapes, colors and designs for both traditional and flat luminaires.

Finally, in addition to the design features of the luminaires themselves, the type of light sources used is distinguished:

A filament lamp is one of the common and simple options. The cheapest light source. Under mechanical stress, it quickly breaks down due to the vulnerability of the structure, burns out relatively quickly (in the case of continuous operation, it can burn out in two or three days).
An energy saving fluorescent lamp is one of the best types of housekeepers. The advantages of the product are associated with efficiency and long service life. Along with LEDs, it is the most common light source in developed countries.
The LED lamp is an expensive product, the popularity of which is increasing every year. The efficiency exceeds 90%, and in the case of high-quality devices it reaches 98%. They are characterized by a longer service life and increased reliability.

An example of a homemade lamp

Consider one of the simplest examples of a DIY ceiling lamp.

For manufacturing we need:

plastic bottle with a volume of 5 liters;
plastic spoons - their number depends on the size of the bottle, which will become the frame;
quick-drying glue for plastic;
sharp knife;
cartridge with wire.

To begin with, a frame is prepared from a plastic bottle. Remove any labels from the item, rinse and dry thoroughly. After that, feel free to cut out the bottom. Cut off all the handles from the plastic spoons, but so that small pieces of 2 cm remain.

Glue the resulting scraps with "scoops" to the base of the frame from a plastic bottle. To do this, we just need the remaining pieces of handles, which need to be poured abundantly with glue and pressed tightly to the surface (the convex part of the scoop should look outward). Glue the container in a circle until the entire surface is hidden. Ideally, spoons are staggered and then slid for a tight fit and no visible areas.

Cartridges with wiring can be taken out of some old chandelier, then installed and fixed in a new product by stretching through the neck of the bottle. A decorative bowl can be decorated with the same blanks using glue and placed on the neck.

To make sure that the product is working, at the final stage, screw a light bulb into the lamp and connect it to a power source. If successful, it remains to install the chandelier on the ceiling.

For a more stylish design and change of color schemes, you can paint plastic spoons. This will increase the originality and attractiveness of the product.

Style selection

In addition to the points listed in the first chapter of the article, when choosing a chandelier, you need to focus on a specific style. This is also true for those cases when you decide to make the product yourself. Comfort, coziness and how pleasant it will be to be in it depends on the interior created in the room.

The ceiling chandelier is the main element of the decor, therefore, with a competent approach, the perception of the environment will improve, with a careless one, it will completely deteriorate. As you know, “to break - not to build”, therefore, to spoil the interior, it is enough to choose the wrong style.

Decide in advance on the design of the future lamp. The most common styles for chandeliers are high-tech, modern and provence.

High tech

It includes products made of glass and metal. Modern appliances fit perfectly into the design of the bedroom and living room. Outwardly, a chandelier may look chaotic (with an arbitrary arrangement of decorative elements). An excellent option for people who want to modernize an apartment or a private house, but do not want to tinker with something too complicated. Any errors made in the manufacture of the chandelier may look like an original design solution.

Modern

In accordance with this style, appliances are created from glass and wood. The ceiling luminaire is characterized by perfectly straight and clear lines and has the correct geometry.

Provence

The most complex execution, which is suitable for people who understand the principles of hand-made. Various fabrics, colorful ribbons, beads, embroidery can be used to decorate the chandelier. The lamps turn out to be gentle, suitable for creating a romantic atmosphere. The Provence style lighting fixture is suitable for decorating any living space.

Installation materials

For ceiling mounting the luminaire, certain materials and tools will be required:

the lamp itself;
junction box;
screwdriver (curly);
switches;
as an alternative - dimmers (rotary toggle switch that regulates the brightness, on / off the light bulb);
wires;
electrical insulating tape;
indicator (tester);
pliers;
connecting blocks.

Ideally, electrical wiring should be routed using connector blocks. If there are no such products, then twist the bare ends of the wires with pliers and hide them under a dense layer of electrical tape. Connections can also be placed under polymer caps. Make sure the wires are tightly wrapped around each other.

When laying the cable, pay attention to the material from which it is made. It is advisable to twist aluminum with aluminum or copper with copper. When wires of two different materials come into contact, gradual oxidation will occur, leading to burnout and loss of contact.

Sequence of work

Determine the phases of the wires before installing the ceiling light. To do this, you need an indicator screwdriver or a special probe. If you attach the working surface to the phase core, the light will start to glow. Otherwise, the wire refers to the zero phase.

Next, you need to determine the phases on the wiring of the lighting fixture. Plug in two wires, but never touch the third. If there are several bulbs on the chandelier, then about half of them will light up. Leave any wire in the socket and insert the third instead of the second. The other half of the bulbs should light up. Thus, the wire that is constantly in the outlet (and when connected alternately with the other two turns on the bulbs) is a zero phase.

Fix the luminaire to the ceiling. For this, both a classic hook sticking out from the ceiling and a mounting rail (included in most modern devices) are used. If there is a hook from an old chandelier, it is advisable to dismantle it.

Connecting luminaires

If it is necessary to connect a floor lamp or chandelier with a two-core cable, difficulties should not arise at all. Simply connect the ends of this cable together with the two ends of the wiring harness. If the luminaire consists of several parts and more wires, then twist them correctly in pairs, subsequently connecting them to the desired residential electrical wiring in the apartment.

A three-core cable indicates the presence of two normal and one neutral phase. Follow the scheme described above to find the zero phase. After that, connect the device to the house wiring.

Traditionally, the zero phase on the luminaire has wires with blue insulation, the usual one is brown, black or red. If there are several blue wires, then they need to be connected in pairs, and then connected to the zero phase. Proceed in the same way with the other colored parts.

Products with four veins are much less common. The latter is intended for grounding and is usually colored yellow-green. It should be screwed to the luminaire body using a regular screw. Be sure to insulate all connections.

For the manufacture of ceiling lamps with your own hands, any materials can be used. The main thing is to choose the style and shape in advance and navigate the place of installation. Also, before starting work, it is advisable to draw a sketch of the future product. Everything else is limited by your imagination.

The connection of homemade lighting devices is carried out in the same way as purchased ones. Using our instructions, you can easily connect ceiling chandeliers with two, three or even four conductors. The main thing is not to forget about the safety rules and to ensure complete isolation of the wires, excluding a short circuit.

Taking on the arrangement of the interior space, it is important to think over every little thing. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and interiors clearly prove that the right choice of chandeliers can not only decorate the interior of a room, but also make life brighter and more fun. Beautiful shades for chandeliers with an original design give special grace and gloss to the lamps. You can familiarize yourself with how to make them yourself and what materials are better for this in this article. A detailed, step-by-step master class, as well as a visual photo, will be an excellent help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out any one material that would meet all the requirements. Each of them has its own individual characteristics and characteristics. For example, paper, which is the simplest and most affordable material, lends itself well to transformation.

Luminaires made from shards of glass and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lacy lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart in time and turn on imagination.

A paper napkin chandelier is a bold but justified experiment

We will describe in detail in this article how in an ordinary object you can see its creative potential for creating an exclusive decor element.

Step-by-step instructions, with a description of each action, will help you make incredibly beautiful and unique lamps from improvised means, which will be a great addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many are interested in how to properly make a chandelier in, and other rooms. After all, I want this element of the interior to be not only beautiful, but also functional.

On the one hand, a chandelier is a lighting device capable of providing the proper level of lighting in an apartment. Indeed, a lot depends on the choice of light in the room, including the safety of the eyes. On the other hand, I want the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, the first thing to consider is the height of the ceiling. For example, a chandelier with a bar mount is suitable for low ones. So, the ceiling will look visually higher. If the ceilings are high - 3 m and more, then it is better to make your choice in favor of a pendant lamp with a hook mount.

Lamp selection

For any room, you need to individually approach the intensity of its lighting.

A small bathroom will require 80-100 watts.
Kitchens need a minimum of 120-150 watts of lamp power.
The living room and the hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps is calculated based on the established standards - 20 watts are required for 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Edison's designer lamps - look beautiful and unusual

Plafond decoration

The appearance, decor and design of the plafond play an important role in the design of the chandelier. It is selected for the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will perfectly fit into country or chalet style, fabric and silk will perfectly suit Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step manufacturing workshop

You don't have to start from scratch to create a beautiful ceiling decoration. Take a look around, for sure you have a thing in your house that you have not used for a long time. And who knows, maybe it is she who will become the main subject in the manufacture of the original lamp. Moreover, there are now more than enough ideas and inspirations for creativity on the Internet.

Important! It is best to start searching for the necessary things from the kitchen or balcony. It is there that we store all sorts of trash, which was once so necessary for us and with which, as often happens, it is so difficult to part later.

Spectacular mug chandelier

As strange as it may sound, but it is from dishes and other kitchen utensils that the most unusual and interesting models of lamps are obtained. For example, tea mugs are the ideal material for making a spectacular light fixture.

For work we need:

Mugs
Saucer
Drill
Porcelain drill with special hole

We make it quickly and easily

At the bottom of the mug, make a small hole for the wire with a drill, attach the electric cartridge and bring the wire out. It is advisable to close the hole with a plaster mixture.
Next, the mug must be glued to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see, the original and fashionable design can be obtained from completely ordinary objects.

Mesmerizing yarn chandelier

Since this is a fairly simple product, we need a minimum of things to make it, namely:

Wire with a cross section of 4-5 mm.
Nippers
Thin thread
Multicolored yarn

Manufacturing instruction:

A ring is made of wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, you can wind it around any object that has a cylindrical shape.
We bite off the excess wire with pliers, leaving 2-3 cm in stock on each side. We tie the ends with a thin thread.
It remains to dress up our chandelier beautifully and brightly. To do this, we cut the yarn in such a way that the length of each segment is twice the height of the shade.
Alternately, on a knot, we tie the resulting strings until we hang the whole ring with them. From the same yarn, we make a fastener for a hook.

You can use such a lampshade both as a chandelier and as a decorative element that decorates the interior of the room.

Combining the skills of macrame and papier-mâché, you can get a stylish chandelier for the bedroom

Important! To make such a lamp, you can use any other thread instead of woolen yarn. The main thing is that it fits harmoniously with your interior.

Unusual teapot lamp

You will learn how to make a chandelier from an ordinary teapot on your own from this master class. Here's what we need for this handmade masterpiece:

Kettle
The wire
Electro cartridge
Metal chain

Step-by-step manufacturing guide

First of all, the lower part of the kettle is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise it will be possible to injure yourself.
Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
A chain is attached to the handle of the kettle, through the links of which a wire is threaded. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they have beautiful shapes, can be used to make a wonderful chandelier. Required material:

Thin rope
Flammable liquid (alcohol or gasoline)
Glass bottles (preferably colored)
Edison lamps (having a beautiful spiral)
Wire and electric cartridge

Do it yourself

We wind a rope on the lower part of the bottle, having previously moistened it in a flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out to the end. After that, we lower the bottle into a container of cold water, wrap it with a towel and, with a little effort, break off the bottom.
To prevent the cut edge from being sharp, it must be sanded. To do this, it will be enough to twist the bottle in sand or fine gravel for a couple of minutes.
It remains to correctly mount the electric cartridge, stick out the wire through the neck, screw in the light bulb. From the remaining bottles, the rest of the plafonds are made in a similar way.

This chandelier will perfectly fit into the interior made in any, especially if you hang it over the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in a similar way as from bottles. The only difference is that the bottom of the can does not need to be cut off, as clear glass is usually used for shades.

We need:

Beautiful thick-walled cans (preferably with a relief pattern)
Hammer and nails
Wire, electric socket
Spray paint
Edison lamp

How to do it right

To begin with, using a nail and a hammer, holes are filled in a circle in the lid, after which the inner part is carefully squeezed out. The diameter of the circle must match the diameter of the base in the chuck.
We insert the cartridge into the cover, mount the wire.
Next, paint the lid with the cartridge in the color of our choice. Metallic paint with a golden overflow will look best.
It remains to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what delightful things can be made of it. For example, a nice lamp shade for a chandelier that will perfectly fit into the interior of a child's room.

Here's all we need:

globe
Bulb
Electric chuck with retaining element

Step-by-step master class

Usually, the design of the globe is not integral, so in order to get the desired element, it is necessary to divide it into equal two parts (hemispheres).
Further, at the top of the hemisphere, you need to make a hole for the cartridge. The best way to do this is to use a drill with a crown.
The electric chuck is installed in place and securely fixed with a retaining element. Congratulations, your chandelier is ready!

Suspended horn structure

Making a unique lighting device out of deer antlers is a fairly simple matter, the main thing is to have the necessary material on hand.

Such structures are famous for their special sophisticated appearance and are best suited for high-rise rooms. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have different shapes, and only natural material is used for their manufacture.

We will need:

Antler
Rope
Copper wire
Electric socket and wire
Bulb

Make a chandelier like this

Observing the safety rules, according to the diagram, we connect the wire to the electric cartridge.
Next, the wire must be beautifully wrapped with a decorative rope. For better fixation, you can use an all-purpose transparent adhesive.
With the help of copper wire, horns are attached at the bottom of the resulting rope, placing them 2 cm above the cartridge.
We repeat a similar procedure with the rest of the shades, then combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that the useful tips and photos presented in the article will help you not only make beautiful shades for chandeliers with your own hands, but also save your family budget.

What could be more interesting and original multifaceted lamp, which will be made with your own hands ?! The lamp itself is an indispensable attribute in every home, but it should be different in something else, isn't it ?!

The idea of inspiration, in order to build such beauty, can appear in a variety of ways. The main desire.

So, in order to start directly, to work, you will need:
PVA glue
Corrugated cardboard
Scissors
Cutter
Simple pencil
Ruler
Ordinary light bulb

As soon as you have acquired everything you need to make a multifaceted lamp, you can start, directly, to the work itself.

From cardboard, you need to start cutting strips of the thickness you want. But first, make sketches with a pencil and a ruler to get fairly even stripes.

There should be a lot of strips so that there is enough for the lamp frame itself

Now, you can start gluing. This must be done very carefully so as not to get dirty with glue. Take one strip at a time and use them to create a square, gluing one by one. You can come up with the shape of the lamp yourself. Squares can be fastened together in different ways.

It is important to remember that one layer should be smaller than the other.

So, both the frame itself and the walls of your lamp should turn out.

After the frame is assembled. We need to make a stable base for the lamp and bring light into our lamp.

To make the base of the lamp, you need to prepare 3-4 squares. To do this, cut out the required number of strips and glue them together.

The resulting squares should also be glued all together - this will be the base of the lamp

After that, it is worth conducting the light. We will lead to the base of the lamp.

To do this, you need to take the cartridge and trace its outline on the bar, which, in fact, will hold it.

Cut a hole along the marked lines

It is necessary to glue the holder of the holder into the lamp.

That's it, the lamp is almost ready. It is not necessary to glue the light bulb inside the frame, since it will hold quite tightly anyway. The lamp frame can be painted in a color that suits your interior.

An indoor chandelier is not only a lighting fixture. Without exaggeration, we can say that she is the main decoration of the room. Hand-made things are considered especially valuable. This allows you to highlight the special taste of the owners of the home, as well as an extraordinary and creative mind. Of course, this type of work is quite difficult and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!

This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can accomplish their plans at home.

In order to make a chandelier, sometimes the most unusual materials are used. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely "unusual", wooden skewers, glass wine bottles, cans, all kinds of tree branches, cardboard, and even straw come into play. You need to choose depending on the idea of the creator and on the wishes of the apartment owners. You also need to take into account the general interior of the room where the finished product is supposed to be placed.

An interesting idea for a chandelier made of plastic spoons

Plastic disposable spoons are one of the simplest and most readily available materials for creating a chandelier in a room. Their advantages are low price, variety of colors and such material will serve for quite a long time. To create such an extraordinary chandelier, you need a minimum of investments, both physical and material.

Materials:

an empty bottle of drinking water, with a volume of 5 liters;
plastic spoons (their number depends on the size of the bottle);
glue for plastic;
an old chandelier (or rather, a cartridge from it);
sharpened knife.

Process of creation:

First you need to prepare a plastic bottle for subsequent actions. Remove the label in advance, cut off the bottom, dry well.
Then you need to get the plastic spoons out of the package and carefully cut off the unnecessary handles with a knife, leaving about 2-3 centimeters above the level of the "scoop".
You need to glue the “scoop” blanks to the base of the bottle. Apply a large amount of glue to the left "tail" and press it to the surface (with the convex side of the spoon outward). It is necessary to cover the entire bottle in a circle until the entire perimeter is filled with plastic spoons. It is advisable to arrange them in a checkerboard pattern and slide them together slightly. This will leave fewer "free spots".
From the old unnecessary chandelier, you need to remove the cartridge, and then place it in an already pasted and dried bottle and fix it on the frame.
A decorative bowl can also be made from plastic spoons: stick the "scoops" around the neck of the eggplant.
Install and connect the chandelier, check its operation.

Note! The option of decorative painting or painting of spoons in absolutely any color is possible. Thus, your product will look even more beautiful and more original!

Chandelier made of plastic bottles in the form of leaves

Another unusual option in the interior will be a chandelier made in the form of leaves. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.

Process of creation:

Cut plastic bottles into pieces that resemble future leaves.
Each workpiece has to finally fix the shape of the sheet.
With a soldering iron with a thick tip and a one-sided bevel, you need to lightly fuse the sections of each leaf in order to give the future product the greatest effect.
In the same way, thanks to a soldering iron, you need to give the workpieces a sheet structure. You need to act very carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with the outlined contours of the veins and slightly fused edges will look complete.
With a hot needle at the "leg" of each leaf, you need to melt several holes in order to attach them.
Thanks to the thin wire, form branches and screw to the steel wire frame.

It would also be a great idea to make a new chandelier in the form of a plafond for a floor lamp or a lamp on a table. Thus, it will be a great addition to the previous product!

Chandelier with paper butterflies

The most common product is a butterfly chandelier. And this is no accident. To begin with, this option looks luxurious and expensive, and secondly, its manufacture does not require special physical costs. Thus, even a child can participate in the creation of a chandelier.

Process of creation:

It is based on either an old chandelier or a similar frame. If there is none, then you can take the simplest wooden or metal rim. If such material is not available, then, as an option, you can take a thick wire and make about 2-3 skeins, so that a circle is formed.
Cut out butterflies from paper according to the pattern. You need to take a butterfly pattern and fit it to the desired size. It also looks very unusual when there are butterflies of several sizes on the chandelier at once (again, depending on your desire). Transfer the outlines to paper and carefully cut, preferably with a sharpened office knife, or with small, not rounded scissors. It is better to use a material for the templates themselves that is dense, not very dirty and does not attract dust. For example, velvet paper is very poorly suited for a product, because in the future you will need to vacuum the chandelier quite often.
Take a thread from nylon or transparent fishing line and attach butterflies to it. You can fix it in two ways: either pierce the bodies of butterflies, or stick them on silicone glue.
Next, we attach the threads with butterflies to the base of the frame and decorate it.
You can also try an interesting option if you make a wire ball! It should be based on a suspension from a chandelier and place several patterns of butterflies on it with a glue gun.

Fabric chandelier

This chandelier is also based on a frame. As in the previous version, either old metal frames or dense wire are suitable for its manufacture.

After you pre-prepare the base, start cutting out the fabric from which the lampshade will be made in the future. How long the finished product will be depends on your desire, but it should be borne in mind that the width of the fabric must be the same as the diameter of the frame! Once you finish the pattern, you need to try it on.

Another nuance is that you will need to sew on the top of the fabric directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then initially you should bend the upper edge of the pattern and stitch it, and then iron it with an iron. Then we sew a seam on the side of the product.

So that the lampshade does not lose its shape, due attention should be paid to the material. If the fabric is too light, "airy", then the bottom of the product should be made heavier. You can use cardboard or fishing line for this.

A neatly sewn fringe, lace or braid will also look beautiful. But don't overload the product! The process of making a fabric chandelier is similar to making a lace chandelier. So you can feel free to experiment with the materials that are located on the frame.

Plafond made of threads and a balloon

Materials:

thick threads, for example woolen, cotton, or jute rope - at least 1 meter;
cartridge;
petrolatum;
PVA glue;
a brush in order to apply glue and petroleum jelly (it is advisable that the brush does not fade);
1 or 2 pieces of balloons (the first one in order to work with it, and the second one in order to check the finished product, if desired);

Process of creation:

Inflate the balloon to a certain size, secure. Remember that the finished work will exactly repeat the shape of the ball! With a marker, draw a couple of circles at the top and bottom, in order to determine the boundaries of the winding of the thread.
Using a brush, smear the ball around the entire perimeter with Vaseline.
Pour PVA into a plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Process them as you wind them around the ball!).
Considering the borders that you marked with a marker, wind the threads around the ball. Do not forget that depending on the density with which you wind, the future appearance of the product depends.
After winding, you need to leave the product for a day until it dries completely; After complete drying, you need to burst the ball and remove it through the holes.
Cut a place at the top and insert the cartridge.
In order to be completely sure that the product is strong, you can insert a ball into it and inflate it. Likewise, you can test the flexibility and reliability of a lampshade.

Alternatively, you can paint the structure with a spray can or acrylic paint, attach all kinds of decorative ornaments to it, such as butterflies, artificial flowers or beads. It is also a great idea to arrange several balls in the form of a bunch of grapes and hold them together.

Wine bottle chandelier

This version of the chandelier is a little more complicated than the previous ones. It is quite difficult to make a chandelier for this, the manufacturing process will require accuracy and care. However, you will love the result!

Materials:

wine bottle;
glass cutter;
sandpaper for sanding the edges;
cartridge;
electrical wire;
metal or wooden frame, rim.

Process of creation:

First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle with a glass cutter;
In order not to cut yourself on the glass, you need to sand the sharp edges with sandpaper;
Pull the wire through the neck of the bottle and then connect the cartridge;
Attach the bottle to the frame.

You can also decorate the bottle with all kinds of decorative items, or leave it in its original form. In any case, it will look original and impressive.

The number of products on the frame depends on your desire. You can either leave one bottle, or fix four or more bottles at once.

Laser disc chandelier idea

This idea is great for those who have a large number of laser discs in their home and do not have to throw them away. It should be noted right away that the manufacturing options and the result can be very different. It all depends on your imagination and creativity!

Materials:

two round wooden planks of different thickness, and which are slightly larger in diameter than the discs;
racks made of metal or wood;
Fluorescent Lamp;
magnetic switch;
disks.

Process of creation:

Make a hole in a thicker plate and install a starter with a switch in it.
Then connect it all to the lamp.
String disks onto the lamp.
Place the stands around the discs and secure the top.

The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in the children's room so that the child cannot harm himself (only if the chandelier hangs out of reach).

Shabby chic chandelier

To create spectacular lighting in a room, you can also make a chandelier out of fabric or beads. The result is a kind of chandelier or shabby chic shade.

Materials:

a ready-made metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
socket and lamp;
chains and threads for decoration;
all kinds of beads and beads.

Working on such a plafond is not difficult, but it is a very painstaking task. These chandeliers usually consist of two or three levels of rings that are stacked on top of each other. It all depends on the size of the selected bases. If you take rings of the same diameter, then the finished product will be made in the Art Nouveau style.

One of the important points is that before you start decorating the chandelier, you need to paint and wrap the frames with decorative materials!

The approximate consumption of beads is:

For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per strand;
For the upper part of the lampshade - 12 mm beads, about 35 pieces per strand.

Naturally, when stringing beads on a thread, you can increase or decrease their number or the degree of tension on the thread. But it is still advisable to stock up on materials in excess of the norm.

The essence of the work is to suspend the strings with beads in a "waterfall" or "cascade" so that they flow down the structure.

In order to make the effect of "dimming" the light, you can sheathe the frame with a dense fabric.

A hand-made chandelier will definitely bring a fresh touch, originality and beauty to the interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, hard work and original taste!

90 photos of DIY chandelier ideas

Today, a chandelier is more than just a source of light. It is one of the main elements of the room decor. Handcrafted lamps are the most popular as they represent the personality of homeowners and their extraordinary creativity.

Undoubtedly, hand-made creativity is a rather difficult task that requires a lot of patience and accuracy. However, doing something with your own hands is always quite exciting and informative. The topic of this review is how to make a chandelier with your own hands.

The choice of material for a homemade chandelier

In order to make a handmade lamp, a variety of materials are used:

glass;
wood;
plastic.

In addition, sometimes, in order to make a chandelier at home, very unusual things are used:

paper;
cardboard;
disks;
straw;
branches;
wine bottles and stuff.

When choosing this or that material, you must take into account your own preferences and style used in the design of the room.

In addition to material, devices may differ in manufacturing techniques. The most common are:

Japanese origami;
macrame;
weaving;
thread;
knitting;
application;
embossing.

DIY chandelier ideas - step by step instructions

Nowadays, there are many unusual ideas on how to create a beautiful lamp for an apartment with your own hands. Let's consider those that are more popular.

Chandelier made of plastic spoons

Conventional disposable plastic spoons are the easiest and most affordable type of material to craft a chandelier. The advantages of such raw materials are:

low cost;
variety of colors;
durability.

To make a lamp, you will need:

a plastic bottle with a volume of 5 liters;
disposable spoons;
PVA glue;
bulb holder;

Procedure:

Prepare the bottle. To do this, remove the label, cut off the bottom, wash the workpiece thoroughly and dry it.
Prepare the spoons by cutting off the handles.
Place the scoops over the entire bottle with the convex part facing outward.
Fix the cartridge in the made plafond.
Attach the chandelier to the ceiling and plug it in.

Chandelier made of plastic bottles

An interesting solution from a decorative point of view will be a lamp assembled from plastic bottles.

We take scissors and cut out various patterned shapes and unusual figures. From them we will assemble a chandelier.
We attach several thin rods to the frame of the old lamp and connect them, removing the central one. At this stage, the lighting fixture takes on the shape of a hedgehog.
We fix all the prepared shapes and forms on the chandelier frame. The product is ready!

Let's consider a particular example - the process of creating a lamp in the form of leaves:

Cut out small blanks from bottles that imitate leaves. Usually birch leaves are chosen.
Using a soldering iron, slightly fuse the cuts at the leaves, and draw the veins - this will make them look more spectacular.
Punch holes in the leg of each leaf with a heated fine needle.
Use wire to form the branches. Screw them to the frame of the future chandelier.
Attach leaves to the branches. The original design ceiling lamp is ready!

Chandelier with paper butterflies

The lamp with paper butterflies is also popular. This model looks very impressive and luxurious, although it is quite simple to manufacture.

Sequencing:

The role of the base is played by a frame from an old lamp or a simple rim made of metal or wood.
Take paper and cut out butterflies from it according to pre-prepared templates.
Attach the cut insects to a fishing line or nylon thread.
Attach the resulting threads to the frame of the future chandelier and decorate it.

Fabric chandelier

This type of lighting fixture is also based on a solid frame or thick wire. First of all, prepare the base, and only then you can start cutting out the material to create the lampshade.

The length of the finished product depends on your wishes, and the width must correspond to the size of the frame. After completing the cutting work, be sure to try it on. The next step is to sew the fabric to the base of the chandelier.

In order for the lampshade to retain its shape, you need to correctly approach the choice of material. If you are using light fabric, then the lower part of the lampshade should be heavier.

Fringe, braid or lace can be used as decoration. But try not to overdo it with the decor.

Plafond made of threads and a balloon

To create such an original shade, you will need to prepare:

thick threads or rope about 1 m long;
old cartridge;
petrolatum;
glue and brushes;
balloons - 1 - 2 pcs.

Manufacturing process:

Inflate the ball to the required volume, and use a felt-tip pen to mark the boundaries of the winding of the thread.
Coat the entire surface of the ball with Vaseline using a paintbrush.
Pour the glue into a wide container and start to process the threads with it as you wind it around the ball.
After you fill the ball with threads to the marked boundaries, it should be left to dry.
After a day, burst the balloon and remove it.
Cut a hole for the chuck at the top and insert it. You also need to cut a hole from the bottom of the plafond - this will make it more convenient to insert the light bulb. The product is ready!

Wine bottle chandelier

Such a chandelier is more time consuming to create than the above options. It is rather difficult to make it. Patience and attention are needed here. But the effort is worth it!

Necessary materials:

wine bottle;
cartridge;
cable;
sandpaper;
base made of metal or wood.

From the tools you will need a glass cutter.

Manufacturing procedure:

Preparatory stage. Wash and dry the bottle, get rid of the labels, mark with a marker a line along which you cut the bottom using a glass cutter.
Sand the cut.
Slide the wire through the bottleneck and attach the socket.
Secure the bottle to a pre-prepared frame.

The number of shades for the chandelier depends on you - you can leave one or make five or six.

Laser disc chandeliers

If a large number of old CDs have accumulated in the apartment, do not rush to throw them away. They will make a pretty creative lamp.

To make an unusual accessory from laser discs, you will need to prepare a pair of round plates. They should be slightly larger than the discs. Still needed:

fluorescent light bulb;
steel or wooden racks;
old magnetic starter;
many CDs.

Take a board that is thicker and punch a hole in it for the starter. Attach everything to the lamp. Then start stringing CDs onto it while mounting the racks. Attach a second plank at the end. The work has been completed.

Chandeliers made of wood

Wood is the most common material for all kinds of crafts. The chandelier is no exception.

To make such a lamp, you need:

wooden planks 0.4 m wide;
glass jars with a volume of 1 liter for shades;
sandpaper;
self-tapping screws.

The order of manipulations:

Sand the strips with sandpaper.
Make recesses in them on the back for mounting the wire and three holes for the shades.
Varnish the planks.
Attach the sockets, screw in the bulbs.
Plafonds will serve as ordinary liter cans, painted white.

Choosing a lamp for a homemade chandelier

To make a chandelier made of scrap materials made by you look even more attractive, you need to choose the right bulbs for it. The following guidelines will help you:

Choose a lamp with a suitable wattage. Remember that overly strong products can cause a fire.
Look at the number of lumens. The larger it is, the more natural the lighting is.
Consider the shape of the light bulb to match your appliance. For some models of chandeliers, light bulbs of a strictly defined shape are required. Only then will they work efficiently and correctly reflect light rays.
Be sure to look at the expiration date. If you plan on using your luminaire frequently, then look at the luminaires with the longest lifespan.
Ask what kind of light the lamp will glow - cold or warm. For the home, it is better to purchase an option with a warm shade of light. This will make the environment seem more comfortable.
Do not ignore the energy consumption of the light bulb. Products with low energy consumption are considered the best choice.
Check for mercury in the lamp - the method of disposal depends on this. Mercury-containing products cannot be simply thrown into the trash can. They must be handed over to special collection points.

Product decoration

You can use a variety of things to decorate homemade chandeliers and lamps:

paints and varnishes;
lace;
satin ribbons;
fringe and braid;
beads, beads, rhinestones, stones.

Artificial or dried flowers, feathers carved from butterfly fabric are a good decor. In general, how to decorate the finished product depends only on you. You can use any available means that your imagination indicates.

In conclusion, we note that such a homemade lighting fixture, like a chandelier, will definitely bring notes of freshness and stylishness to the room atmosphere. Your loved ones and guests will surely note the originality of the accessory and your skill. In addition, a hand-made lamp is an excellent gift for a friend or colleague.