Beautiful false fireplace. DIY decorative fireplace

Reading time ≈ 3 minutes

Evening, twilight and dancing flames in the fireplace, which you never get tired of looking at. The room is incredibly cozy, a cup of hot cocoa in your hands, what could be better? Many people think that a fireplace is a luxury available only to wealthy owners of private households. This is not true, it can be installed in ordinary apartment, even a one-room one, although it will be decorative without a chimney, pipes and valves, but the main details - firebox, portal, shelf - will be present. Do decorative fireplace Even a woman can do it with her own hands. Many ladies handle construction tools no worse than men.

What can you make a decorative fireplace from?

Brick is suitable, and not necessarily fireproof; eco-style lovers will prefer wood. If after repair there is still edged board, it can also be put into action. A board with pieces of bark will look interesting; it will create a feeling of unity with nature. A transparent vase, an old aquarium that was about to be thrown away - everything can turn into a cozy hearth. Sometimes a fireplace is required for children's party, creating a Christmas atmosphere. It is above it that children hang stockings for gifts. In this case, you will need cardboard and plywood. It will take very little time to build a fireplace. The easiest way out is to buy decorative elements and stick them to the wall.

Drawing

When asking yourself the question of how to make a decorative fireplace with your own hands, you first need to draw a sketch and calculate the amount of material required. The hearth should look harmonious, fit into the interior of the room, and not be an alien element in it. It is placed in niches, against the wall, in the corner, where it won’t get in the way. For small room An almost flat hearth with a firebox depth of up to 30 cm is suitable; it is visually enlarged by a mirror installed inside. To fully enjoy the play of light, the firebox should be at the level of the face of a sitting person. Optimal width portal - one and a half meters.

You can see a photo of a decorative fireplace with your own hands on our website. This will give someone an impetus to action and help them decide which fireplace will suit your apartment.

The best material for a fireplace is plasterboard

Most often, plasterboard is used for an artificial hearth.

It is easy to cut with a regular stationery knife. After wetting the part, you can give it the desired shape. For the “skeleton” of a false fireplace you will need a profile; its trimmings will be used for stiffeners and struts.

Drywall sheets are attached to the frame using self-tapping screws.

The seams between the sheets, the ends of the fireplace, the places where the screws are attached are puttied, and your DIY decorative fireplace made of plasterboard is almost ready.

The most exciting stage of the work begins - decorative finishing.

The fireplace can be painted, covered with film, or finished with artificial stone, pieces of glass or porcelain. Polyurethane stucco will look impressive, especially if it is painted bronze and silver.

The video posted on our website will help you make a decorative fireplace with your own hands. The lattice will give the fireplace authenticity.

The mantelpiece is made of artificial or natural stone, MDF, wood, plasterboard with tile or porcelain stoneware trim. Lighting is installed in the firebox, or candles are placed. And you can enjoy the play of light or flame.

The desire for comfort and coziness is inherent in each of us. The warmth of a home is not an empty word. What could be better than spending evenings by the fireplace watching the flames? Owners of private houses can afford a real fireplace, but for residents of city apartments this, unfortunately, is an unaffordable luxury. But for real masters nothing is impossible, and today we will tell you how to make a false fireplace in an apartment.

What is a false fireplace and why is it needed?

In a city apartment, conditions will not allow you to install a regular fireplace. The lack of chimneys and floors not designed for such loads are the main obstacles to obtaining permission to build such a structure.

False fireplaces come to the rescue, which you can easily assemble yourself without having any special skills in construction work. Of course, you can buy an electric fireplace - such devices are now common, and their installation will not take much time and effort. But the creation of a fireplace with my own hands - Very exciting activity , it gives free rein to imagination, allows you to create an exclusive thing. Besides open fire

in an apartment it is not necessary (and it is unlikely that you will be allowed to do this), and a false fireplace will serve as a multifunctional decoration.

False fireplace looks like a real one

Artificial fireplaces have the following advantages:

cheap - you only need money for materials;
availability of materials necessary for the manufacture of the structure;
the ability to change the decor at any time according to your mood;
use of inexpensive, but original and beautiful materials in decoration.

False fireplaces are divided into 3 groups:

Reliable artificial fireplaces completely imitate real ones, respecting both dimensions and design principles. Inside the firebox you can install a bio-fireplace burner, which will provide an almost exact effect of a burning hearth. Quite an expensive option, but it looks the most plausible.
Conventional false fireplaces have a portal protruding from the wall. They can be decorated according to your taste and desire. The combustion hole is usually filled with firewood or candles are placed there.
Symbolic ones can be made from any materials. Their peculiarity is that they are not at all like an ordinary fireplace. It could even be a drawing made on the wall with some decorative elements.

Manufacturing options

For the manufacture of artificial fireplaces, the most simple materials, which can always be found not only in the store, but also at home:

drywall;
plywood;
Styrofoam;
cardboard;
tree;
brick;
polyurethane.

You can make such a structure even from old furniture, which has already served its purpose, but it’s a pity to throw it away.

This is the easiest and fastest way. You only need to buy a polyurethane portal for the fireplace. The most difficult thing in this task will be choosing the style and size suitable for the room, and everything else will take you a minimum of time and effort.

If you want to install an electric fireplace, take into account its installation and dimensions, method of connection to the electrical network and quality of ventilation.

The lightweight body of the false fireplace made of polyurethane will save you from many installation hassles

You will need:

polyurethane portal for the fireplace;
contact glue;
putty;
materials for finishing the firebox (for example, decorative brick).

Now we’ll tell you step by step how to install such a fireplace.

The best place to install such a fireplace is one of the side walls of the room. The structure should not clutter the room or interfere with passage.
If you decide to place an electric fireplace or decorative electric lighting inside the portal, take care of the wiring and socket first.
Make the firebox frame from profiles or wooden blocks, and the walls from plywood or plasterboard.
Install the portal, carefully secure it with contact glue. Carefully fill the gaps between the portal and the firebox with finishing putty.
Finish the firebox in the style you choose, or install an electric fireplace. If desired, you can install mantelpiece from artificial stone or wood.

Such portals are made not only from polyurethane, but also from wood. They are much more expensive, but among them you can find real masterpieces, additionally equipped, for example, with a built-in bar.

Plywood construction

This idea is useful if you need to hide some defect in the room, for example, an old heating radiator, the replacement of which will not be cheap. A false fireplace will come in handy here.

The need to cover up the old heating radiator- an excellent opportunity to install a false fireplace

Carry out calculations and make a drawing of the future structure. This will help you avoid wasting extra money and time.

Drawing of a standard fireplace

Note! When you develop a drawing, refer to ready-made options stone fireplaces. Based on them, you can easily design your false fireplace.

First of all, install the frame directly in place. Suitable for him wooden blocks.

Frame made of bars for a false fireplace

Next, cover the frame with plywood. Fireplace design and appearance can be adjusted during operation. For example, you can add a podium to the portal. Inside the structure there is heating battery, so it is better to assemble the frame with screws: nails in conditions high temperature do not guarantee a tight fit of plywood to the bars in the future.

Frame covered with plasterboard

By back wall attach a firebox that imitates a fireplace to the block. Cover all surfaces visible from the outside with self-adhesive film.

Install the firebox and cover it with film

Cover the corners of the portal with a wooden layout, and cover it with film of the same color.

The corners of the portal need to be closed and also covered with film.

This design is easily removable (it is not attached to the wall at this stage), and you can easily access the radiator. The firebox needs to be decorated with something, so you can put a metal mesh tray on the radiator.

A metal mesh tray that will become the bottom of the firebox

You will fill it with pebbles, firewood or other decorative elements.

Fill in metal mesh pebbles or other filler

You can order a fireplace grate or make it yourself. For this you will need a copper profile. If this is not available, aluminum wire inserted into a vinyl chloride tube and painted with gold paint will do. This grille is attached to the fireplace body with copper wire in 4 places.

Metal grating diagram

The pipes that go to the battery can be covered with an extension of the podium.

Cover the heating pipes with a podium

To usable space don't go to waste, make a bar under the mantelpiece.

Using extra space

As a result, you will get a fireplace like this, almost indistinguishable from the real thing.

Ready-made false fireplace

New life for old furniture

This is the most a budget option. You probably have old wardrobe or sideboard. Don’t rush to throw away this piece of furniture: on its basis you can easily make an excellent imitation of a fireplace with lighting.

you will need:

plywood sheets;
wood sander;
jigsaw;
screwdriver;
acrylic paint;
putty;
LED Strip Light;
stucco molding, decorative elements, gypsum finishing stone;
surfaces.

Remove the doors from the old sideboard and remove the lower cabinet. The top section will remain, place it on its side.
Preparing an old sideboard for use
Screw two beams in front.
Screw 2 beams
Attach two sheets of plywood to the bars at the top and bottom. This will give the fireplace the required thickness.
Secure the plywood sheets
Cut a hole in the door of the side cabinet (which is now located at the bottom) for the “blower”. Here you can store firewood, just like in a real fireplace.
Cut out a hole for the “blower”
Your raised fireplace will need a pedestal and mantel. They can be used as two backboards from an old bed. Don't forget to unscrew their legs.
The headboards of the bed will serve as a pedestal and mantelpiece.
The structure is ready, now we need to start finishing work. Sand the polished surfaces to roughen them. Prime the walls; after they dry, putty and level the surface. Dry the putty and sand down any uneven surfaces. Paint the body acrylic paint, trim the corners with brick or artificial stone. Glue on decorative elements and install a mantelpiece.
Finishing a false fireplace from old furniture
Decorate the firebox. Glue LED strip around the perimeter. Red or yellow will do - they will perfectly imitate a smoldering fire. Place shells, pebbles or sand at the bottom.
Decorate the firebox: glue in an LED strip, add pebbles, shells or sand to the bottom

As a result, you will have this magnificent fireplace in a vintage style.

Ready-made false fireplace from an old sideboard

Imitation of a fireplace made of plasterboard

This time we will consider the option of a corner false fireplace made of plasterboard. This task will be more difficult than the previous ones. Why exactly corner fireplace? Because in conditions small apartment the corner is the freest place, which is ideal for installing such a structure.

Corner false fireplace made of plasterboard

So, you will need the following materials:

metal profile - 13 pcs;
moisture-resistant plasterboard 9.5 mm - 3 sheets;
tiles - 5 m;
self-tapping screws - 200 pcs;
tile grout;
LED Strip Light;
decorative lattice.

Calculate the dimensions. Please note: if you need to close the battery, you need to do it in such a way that it can be easily reached. For possible emergency situations, it is better to run the battery through the lower opening.
Approximate diagram of a corner fireplace
After the calculations have been made and the fireplace diagram has been drawn up, begin installing the frame. Good for him ceiling profile, and it's also cheaper.
Immediately make electrical wiring for the lighting. As you can see in the first photo, in our case there are three output points: two on the facade and one above the shelf. An LED strip is used as illumination.
The combustion hole can be made with double walls. Non-flammable insulation will be laid between them.
Finishing a false fireplace decorative tiles
For decorative finishing, you can use stone-like tiles. It is made of plaster, so it is not suitable for work surfaces.

This fireplace takes up approximately 1.6 square meters. You can place a small electric fireplace or a small alcohol burner inside the firebox.

Finishing

It is very important that the fireplace fits harmoniously into the interior of the room. You should carefully choose the style and color. But in addition, decorative finishing should please the eye and create comfort.

How to simulate fire in a fireplace? Above we offered options with LED strip, which provides lighting with a burning effect. But progress does not stand still, and an electronic photo frame can serve you well. It is a liquid crystal display that is designed to display pictures. You need a model that can play animated files, such as GIFs. Upload an image of a burning fire to your photo frame and enjoy!

Many owners of false fireplaces love to decorate niches with candles. different heights. It looks beautiful, stylish, and gives a real live fire.
An excellent choice would be to install a mirror deep in the furnace niche, on the wall. The mirror will multiply the reflections from candles or electric lighting and add mystery to the fireplace.
Artificial stone will help you achieve the effect of an expensive finish. It is available in a variety of color and texture options. Tiles, bas-reliefs and decorative tiles will add expressive individuality to the structure. But don’t overdo it: excessive pomp may be out of place in your interior.
Doors for false fireplaces will probably be superfluous, but if you decide to install them, make them from plexiglass. They can be transparent or tinted, but they simply must allow light and glare of the “fire” to pass through.
It is better to decorate the firebox of an imitation fireplace with a forged metal grate. It can be bought or ordered from the workshop.

Photo gallery of artificial fireplaces

An original and laconic option - a simple niche with candles

Video: how to make a false fireplace from plasterboard with your own hands

As you can see, building a fireplace at home yourself is not at all difficult, and it’s also cheap, especially if it’s just an imitation. Accuracy, attention, the desire to do something original and creative imagination - that’s all you need to enjoy comfort, like the heroes of classic films. Share with us your experience in implementing such ideas, or ask any questions you have on this topic. Easy work for you and comfort for your home!

Share with your friends!

The beauty of the flame of fire enchants and attracts. You can look at it without stopping for hours. And you rarely meet a person who would not dream of installing a fireplace in their home. But what to do if you live in an apartment and you can’t install a fireplace in it? This is where a decorative fireplace made of plasterboard will come to the rescue.

photos

Advantages

Decorative fireplaces are becoming more and more popular every day. If they used to emphasize their wealth, now they are a common decorative element. This is because such fireplaces bring harmony to the home and have a number of positive aspects.

A decorative fireplace will add chic to any interior, acting as the main accent in it.
A false fireplace is not only a decorative element, but also a heating device that will bring warmth and add comfort to your home.
It’s nice to spend time with loved ones around it.
Not dangerous for children.
A DIY decorative plasterboard fireplace will not require large investments.

And these are just the main advantages of installing a false fireplace at home.

photos

Place for a fireplace

If you decide to install a flash fireplace in your home, then first you need to determine the location. The choice of its location is very important so that you can qualitatively create the illusion that the fireplace is quite real.

First, we determine the room where we plan to install such a fireplace. Everything is simple here. Most likely, this will be a living room or hall. Less commonly, decorative fireplaces are installed in the bedroom.
Secondly, we plan its placement. Usually it is installed in the middle of the longitudinal wall. But here everything depends on your wishes and the design of the room, as well as on its technical capabilities.

You should not place the fireplace in places where it will interfere. For example, near cabinets, doors and radiators. Not only will this make the installation job more difficult, but the fireplace may be damaged later.

How to do

To make a decorative fireplace yourself, you will need some skills in working with drywall, the ability and desire to create, and, of course, a tool.

First you need to make drawings. First, draw a diagram of the location of the future fireplace, or even several, and then draw the fireplace in two projections, add all the necessary dimensions. It is better to make a life-size drawing so that it can be easily tried on the wall. We develop the sketch down to the smallest detail so that you don’t have to redo anything later.

Based on the drawing, we make a model of the future fireplace from cardboard boxes or polystyrene foam. It is necessary to create all the details of the fireplace and install them with tape where you plan to place this decorative element. Carry out the layout carefully, completely in accordance with the design, in order to analyze errors in advance and eliminate them.

Let's move on to the construction of the structure. During construction we will need:

Bulgarian;
perforator;
screwdriver;
cutter;
putty knife;
stationery knife;
metal scissors;
roulette;
building level;
pencil.

Initially, we transfer all the details of the future fireplace onto sheets of drywall and cut it out using a grinder. We mark all parts of the fireplace on the wall, use a building level to maintain a clear horizontal and vertical line. We install guides on the wall where we plan to place the false fireplace. We do this using a hammer drill and dowels.

If you are not planning to install a false chimney and are thinking of organizing a shelf at the top for photographs and figurines, then you need to immediately strengthen the side posts to ensure the reliability of the structure. Run a cable with electricity into the structure so that you can then insert and connect an electric fireplace or LCD TV into the portal. You can assemble the frame separately, and only then install it on the wall. This option is more convenient if your fireplace is located near a wall.

Now we cover the frame with plasterboard. We do everything carefully, remembering that a deviation of a few millimeters can distort the entire picture and will not make it possible to fill the portal in the future. If the cladding of a false fireplace is supposed to be massive and heavy, then it is necessary to cover the future fireplace with two layers of plasterboard. Sheets of plasterboard with a thickness of at least 1.2 cm are suitable for lining the fireplace.

Next we move on to the putty. To do this, it is necessary to sand the edges of the drywall, prime and fill the fireplace completely. We also produce putty inside and outside. We use tape and perforated corners to connect the sheets together so that the grout holds well and the surface becomes perfectly flat.

The next stage is finishing the false fireplace. You can decorate it with any material. Tiles, artificial stone, plaster finish, granite, marble, just painting and much more. It all depends on your imagination and stylistic decision rooms in general.

But first you need to finish the inside of the decorative fireplace, especially if a heating device will be installed in it. In this case, thermal insulation is necessary. We trim the portal with magnesite and cover it with foil on top. Such a layer will reflect heat and will not allow the inner walls of the fireplace to heat up.

If heating device is not provided for in a false fireplace, then the inside can be decorated with a mirror.

If the fireplace is decorated with artificial stone or marble, then Finishing work can be omitted as putty. In this case, you just need to prime the drywall, and then glue the stone with special glue. Let the glue dry well and treat all the seams between the stone with a special grout.

Another great way to finish a plasterboard fireplace is decorative plaster. We apply it to the fireplace and, without waiting for the coating to dry, use a spatula to imitate brickwork.

You can cover it with decorative film by choosing a suitable pattern. Huge selection textures will make your fireplace unique.

After finishing the fireplace, it is necessary to decorate it. To do this, we use various columns, stucco moldings, and moldings. This decor will give artificial fireplace naturalness and completeness.

You can install a decorative shelf on the top of the fireplace, or install an electric fireplace or TV in the firebox.

Interior design

The design of a decorative fireplace can be executed in any stylistic solution, and it can be equipped in different ways. What you fill the portal by the false fireplace with will determine the function of this decorative element.

Fireplace decorated in classic style, decorated with marble or granite, with an electric fireplace in the portal, will bring not only warmth to your room, but its presentable appearance will become the central accent in the interior.
A false chimney will add naturalness to the fireplace.
A brick-trimmed fireplace with a TV in the firebox is suitable for a high-tech stylistic solution. Its clear lines and simple shapes fit perfectly into this style.
Finishing in the form of Greek statues will add chic and fit into bohemian style living room.
For an apartment decorated in Art Nouveau style, a fireplace with minimal decoration is perfect.
Candles in the portal will add a romantic touch to the decor of the room.
The decorative fireplace can be used as a shelf for books.
A corner false fireplace will be a decoration even in a small room.
Top shelf You can decorate the clock with figurines, adding English chic to the interior.
A decorative fireplace trimmed with stone is perfect for a room with a rustic style.

A fireplace with burning wood is an object from books and films that can rarely be seen in someone’s home. real life. This pleasure is expensive, and besides, installing a real fireplace in an apartment is almost impossible. But for those who really want to have such a home, there is an alternative - DIY decorative fireplaces.

In order to make decorative fireplaces for an apartment, it is not necessary to have special skills and experience, the main thing is to use your imagination and have several on hand construction tools and materials.

Types of decorative fireplaces

It can become the main decoration of any room, but it is very important that it matches the main interior. Therefore, before you start making a fireplace, you should choose the style in which the fireplace will be made.

For better to make a fireplace square shape. You can decorate it with bas-reliefs and stucco, you can also use artificial stones that imitate precious stones. It is better to make the lining of such a fireplace from brick or marble tiles.

For a country style interior, it is better to use rough materials. In this case, the imitation of a home should look as simple as possible; decorative elements are not welcome.

For a room decorated in Art Nouveau style, a decorative fireplace made, for example, from reflective materials is suitable. And an unusually shaped fireplace with sharp corners, decorated with mirror elements.

Decorative fireplace made of plasterboard

Fake fireplace can be made from plasterboard - this material is sold in any hardware store and it's not very expensive.

For the base of the fireplace you will need metallic profile.
In addition, you must purchase:

screws;
metal screws;
dowel-nails;
cladding materials;

The process of making the base of a decorative fireplace

Step one.

First of all, you need to draw a sketch of the fireplace on a reduced scale on a regular sheet of paper. Then you need to find it in the house suitable wall, produce necessary calculations and mark the places where the base of the fireplace will go. If the fireplace is located in a corner, you will first have to completely assemble the base and only then install it; in other cases, you can assemble the frame directly on the wall.

Step two.

It is necessary to cut the metal profile based on the marks on the wall, and then assemble the back wall of the fireplace. The base must be secured with self-tapping screws. It is better to fasten the frame to the wall using dowel nails.

Step three.

Gradually you need to assemble the base completely - for this it is better to check the drawing, otherwise you can get confused in the calculations and the fireplace will turn out uneven. To make the fireplace stable, you need to make jumpers every thirty centimeters. If there is a fireplace top part in the form of an arch, it is necessary to make cuts on the sides of the profile and only then give it the shape of an arc.

Step four.

Now you can move on to cutting the drywall. To do this, it is better to use a hacksaw or jigsaw, but if you don’t have such tools, you can arm yourself with a regular knife. Before cutting, you need to measure each side of the base so that you don’t have to cut off excess parts later. finished fireplace. You can screw the parts to the base using 25mm self-tapping screws. The base for the decorative fireplace is ready.

Plasterboard fireplace cladding

A plasterboard fireplace can be painted or covered with decorative tiles. Based on what the cladding will be, you need to properly prepare the plasterboard base.

If decorative fireplace will be painted, you need to tighten the screws well so that the caps do not stick out. It is also worth remembering that first the base must be coated with a primer, then putty, and only then paint.

If the base will be covered with tiles, then you should proceed from the recommendations that are written on the glue box. Under no circumstances should you rub the seams right away - this work must be done after a day, during which time the glue will have time to dry.

A decorative fireplace will also need a shelf - you can purchase a regular one wooden board or a stair tread at a hardware store.

Decorating a plasterboard fireplace

Plasterboard fireplace - robust design. Therefore, you can give it a natural effect using ordinary building materials.

For example, the firebox can be covered with tiles, artificial bricks or mirror panels.

The top of the fireplace can also be decorated, or you can install a shelf that will definitely hold several books, candles or figurines. You can also attach a decorative metal fence to this fireplace.

Cardboard fireplace

Another material that is suitable for creating a simple decorative fireplace with your own hands is cardboard. To make the imitation of a home fire stable, it is better to use cardboard box from any piece of household appliance.

In addition to the box, you will need a knife, a ruler, a pencil, scissors, a large stapler and construction tape. To decorate the fireplace, you can use wallpaper with a brick wall pattern..

The process of making a fireplace from cardboard

Step one.

First you need to draw a sketch of the fireplace, then you need to draw the future fireplace on the box.

Step two.

The excess parts of the box must be cut off, then you need to secure the future fireplace with a stapler and seal all the joints of the cardboard base with construction tape.

Step three.

Using a special or regular knife, you need to cut out the firebox for the fireplace. You can cut out only the top and sides of the firebox, then fold the cardboard inside the box to create a shelf. It is also better to secure it with construction tape.

Step four.

The finished base can be attached to the wall at this stage. You can use double-sided construction tape for this.

Step five.

After this, you need to cut the wallpaper and paste over the fireplace. If you don't want to mess around, you can use self-adhesive film and brick pattern, but the wallpaper will look more natural.

Step six.

Now you can decorate the top of the fireplace - to do this, you can cut out a shelf from cardboard or purchase decorative elements from foam plastic.

Decorative fireplaces made of other materials

People who have construction skills can do decorative brick fireplace- however, in an apartment it is better to lay out a small fireplace, or just a frame for it, from real bricks.

Also popular wooden fireplaces . You can also make them yourself. But for those who do not have experience working with wood, this method of creating a home is not suitable.

The basis for a decorative fireplace can be, for example, old chest of drawers- but you will also have to attach boards and other wooden elements that will need to be processed. So this method of creating a decorative fireplace is also suitable for people who know how to work with wood.

Simulated flame

DIY decorative fireplaces It’s not that difficult to do, it’s much more difficult to figure out how to make an imitation of fire.

One of the expensive ways is to buy a special electrical appliance, which will display an image of burning wood, and also produce a crackling noise corresponding to this process.

You can also depict fire, as in the fairy tale “Pinocchio”. That is, you can simply stick a picture of burning logs on a decorative fireplace. It is better that the pattern is small and located on the back surface of the firebox.

Besides, fake fireplace can be decorated with light bulbs or New Year's garland. A garland wound around real firewood will look interesting - this method is suitable for a plasterboard fireplace.

For a plasterboard fireplace, you can also make a mirrored firebox and put regular candles there. The flame will reflect beautifully and create a cozy atmosphere.

Another interesting option- place an ordinary small one in the fireplace niche table lamp and seal the firebox with a translucent film of yellow or orange color. In this case, you need to figure out where to hide the wire so that the lamp can be turned on and off as needed.

If your decorative fireplace does not have room to place any items, you can place a few treated logs in front of the fireplace and place beautiful candlesticks on them.

Unusual decoration of decorative fireplaces

It should, first of all, please the eye, so it is not necessary to decorate it with firewood and place a poker next to it. Designers offer many original ideas.

There is always a clock near a real fireplace; it either hangs above the hearth or stands on the mantelpiece. If there is a decorative fireplace at home, interior decorators suggest installing a clock in a niche or firebox. Such a fireplace with a clock will definitely attract attention.

You can also give the fireplace an unusual look with the help of several shelves installed in a niche. You can put small figurines, candles or boxes with some little things on them.

As a rule, people read near fireplaces, so you can decorate a fireplace with a square-shaped firebox good books. The niche can be completely filled with your favorite books in bright covers - it looks very unusual.

You can also decorate a decorative fireplace using paintings or photographs. Small frames can be hung around the perimeter of the fireplace, and large frames can be beautifully placed in a niche.

Those who have city apartments in their possessions probably miss the crackling of firewood somewhere in the depths of their souls. home interior. But this is not at all a reason to deny yourself such pleasure, limiting yourself to the fireplace, near which you can sit comfortably on a frosty evening.

After all decorative false fireplaces made with your own hands can bring no less comfort and warmth to your home. Especially if they are equipped with an imitation flame, as well as an electric firebox.

Note. When creating a false fireplace, you may need lumber; the website https://faneramonolit.ru/katalog-pilomaterialov/ offers the largest range at affordable prices.

Step-by-step instructions on how to make a false fireplace

This is a completely simple procedure. To make it, you will need to make a sketch, which, by the way, you can draw yourself! Construction Materials Any will do. You can use drywall on a metal/wood frame.

Polyurethane, porcelain stoneware, tiles, MDF. You can come up with absolutely any shape for your fireplace, for example, imitate a classic hearth, or create original design, which will be complemented by other decorative elements. There are many ideas for homemade projects on this site.

Polyurethane

Most in a fast way Making your own decorative fireplace is to purchase a ready-made polyurethane portal. The thing is that the store offers today a wide range of various portals, among which choosing the right style and dimensions for your home is not at all problematic.

Electric fireplaces can be built into such a design, for which you need to know what its dimensions are (dimensions and installation). It is also important to know what the requirements are regarding ventilation as well as electrical connections.

When deciding to install a false fireplace made of polyurethane, you can use the photos of false fireplaces in our catalog, thanks to which you will certainly quickly decide on the right choice.

To make this version of the fireplace, you need a store-bought polyurethane portal, a contact type of glue, putty, finishing materials for a firebox like decorative brick.

Installation process:

Select the location where the false fireplace will be installed. It is advisable to install it on one of the side walls in the room, since in this way you will achieve maximum harmony. At the same time, the fireplace should not become an obstacle to movement in the room.
You need to think in advance whether your portal will have an electric fireplace, as well as lighting. To do this, you will need to run wires and make an outlet nearby.
Using wooden blocks you should make a frame. Also for a profile with a wall, plywood or gypsum board is suitable.
The portal should be installed. Then secure using contact glue. Carefully fill the gaps using a finishing type of putty.
Install an electric fireplace and finish the firebox in accordance with your preferred interior design style. If necessary, connect the backlight. If your fireplace is in a classic style, lighting with soft and warm tones. In other cases, an LED strip can be used.

Backlight

If you are not going to install an electric fireplace, decorate the back of your structure with a mirror. Place decorated logs on the bottom/cover it with stones, shells, and glass balls.

Can be done completely safe fire inside your fireplace. To do this, install candles with different shapes and height.

Decoration of the back of the fireplace

The portal can be decorated using paint, patina, gilding, or using decorative elements. The mantelpiece can be installed from wood/artificial stone.

Finished portals are made of polyurethane or wood. They are much more expensive, but at the same time you can find the most incredible masterpieces among them. For example, a bar can be installed inside.

Plasterboard false fireplace

If after repair work You still have a profile or plasterboard, use it! This option will not only be excellent, but also very inexpensive. And the design will fit into any type of niche/corner. It can also become an element of a real shelf composition.

For such a structure you will need: wooden beams, galvanized plasterboard profile, gypsum board trim, plywood sheets, screwdriver, jigsaw, metal carving scissors, putty, acrylic paint, brick/decorative stone.

The manufacturing process is as follows. It is important to think through a sketch of the fireplace in advance, which will indicate all the dimensions, including the joints of the frame parts. It is important to measure the room and decide where exactly the fireplace will be located. Then the calculation is made required quantity material.

The frame is made from a profile, its elements are connected to each other with self-tapping screws. The profile is cut with a hacksaw/scissors. In order for all elements to be as stable as possible, they should be connected by transverse types of jumpers. If your structure is too large, then its frame should be attached to the floor and walls. After all, if it is heavy, or simply narrow, the fireplace will be completely unstable. The gypsum board should be cut out in accordance with the sketch, then tried on, trimmed if necessary and secured using black knee screws directly to the profile. The self-tapping caps should be slightly deepened so that puttying will not be problematic in the future. GCR is quite easy to cut with a knife.

Then the sheets are screwed to the frame. The joints and fastening points should be puttied and leveled using putty intended for interior work, in two layers. The corners should be reinforced with paint mesh.

Then you should putty the edges with the gypsum board joints. Level the surfaces on the sheets; if necessary, use putty. The structure needs to be painted. Also, for finishing you need to use other materials, such as artificial stone, tiles, stucco. You need to glue it with a special glue, which is diluted strictly according to the instructions.

The firebox is being decorated brickwork, or a mirror is installed on the rear wall of the structure.

You can also install candles inside the firebox, or install an imitation of a hearth with lighting.

False fireplace completely safe design, which can be installed even in children's rooms. At the same time, you can use the mantelpiece as a stand for photo frames, toys and other things.