Many owners accumulate at home a large number of different instruments that need to be stored somewhere. Pushing them into different cabinets and shelves is not an option, since at the right moment you may not find the tool right away. In order to fully store it, a do-it-yourself tool case is perfect. You can of course buy it at the store. But this will require a lot of money, since a high-quality toolbox is expensive and cheap cases won't last long. But you can make a toolbox just the way you need it on the farm. Moreover, you can choose the design and material yourself, and less money will be spent. If you are the real owner, then you often have to do home repairs. And how nice to do it when you know that necessary tool always be at hand, which greatly simplifies this very repair. See how to make a do-it-yourself tool case that is suitable for their full storage and transportation.

From the tutorial you will learn:

1.What can be used to make a homemade tool case.

2. What useful sections can be made in this case.

Video lesson: DIY tool case

Lada Kalina Sedan ›Logbook› A suitcase with a tool with your own hands

I have been thinking about this for a long time. There were keys from old stocks, the heads were bribed as needed, and everything ceased to fit into the box from under the first-aid kit, and the tool loves order. Good set rubles for 5 will pull at least - the toad strangles, especially when part of the tool is available. And then my father presented me a suitcase from someone c ... th (stolen) drill. Bribed insulation at the construction base, dermantin and go. Heads are placed in the lower part, etc. A double-sided tab with keys and the rest of the tool is inserted from above.
Some inconsistency came out with the Soviet keys. Our standards differed from foreign ones, as a result, some sizes are duplicated after the additional purchase of missing keys. Keys are separately ring and open-end so that in a situation where 2 identical keys are required, problems do not arise. Combined only 2 - 15 and 21.
The suitcase has the ability to expand and space for storing new heads (half of which have not yet been bought). One extension cord for 1 / 2-250, a cardan joint, a knob and a few screwdrivers is still missing, but there is room for all this. I tried to be guided by the set of tools necessary for the viburnum + additional tools.

On this side, an extension cord with a knob will still fit and I will try to place 4 screwdrivers.

There are plans to buy a normal 1/2 ratchet. Although to admit this Chinese as in the photo, I rolled the bolts 8 lightly.
A set, as is customary, if you put everything that is conceived there includes more than 80 items, and this is already a decent set.
In short, we have a set of 1/4 heads from 4 to 13, 2 extensions, a hinge, 1/2 heads from 10 to whatever fits. Bit sets of all types, pliers, cutter. Open-end wrenches from 8 to 24, with the exception of non-running sizes 16, 18, 20, 23, ring wrenches from 10 to 24, combined 15 and 21.
In short, I'm happy. It is quite convenient and capacious to store the main instrument in one place. As for quality, part of the Soviet-made tool and, accordingly, quality ( most of keys), the matrix part (nothing like that), the force part (optimally for the price-quality), the lux tools part (done for the OBI network. / 4, and there is also lux tools 1/4 - I don’t know which one is more reliable, but the suite seems to be more convenient.

Suitcase with DIY tools

thanks for watching. My affiliate program VSP Group. Connect! https://youpartnerwsp.com/ru/join?70576 DIY tool cabinet. DIY tool case from an ordinary diplomat. DIY tool trays. box for change. Bags and cases for Pro'sKit tools. Case bag from China (aliexpress) for tools. Electrician's pouch bag. DIY toolbox from an old diplomat. Suitcase, electrician's bag. How to make a tool organizer. do-it-yourself storage place for the tool in the garage. 9.Do-it-yourself tool. Bohr machine. What is the best way to carry the tool (case or bag). Organizer in a bag or backpack with your own hands. We are going to Delfino Lido beach in Italy. Convenient do-it-yourself plywood and fiberboard tool boxes.

YouTube copyright policies restrict this video from being played at this website.

[f] Share this video on Facebook

FunnyCat.TV © | 2014-2017
Best funny cats videos.

Powered by
public API's

DIY suitcase

Making a suitcase with your own hands, as it turned out, is very simple. Much easier than restoring an old suitcase. This does not require any "reserved" elements and devices, and that's all necessary materials are available and sold in stores at fairly low prices.

Background

As is often the case in creative practice, the necessary things are usually in the trash can, like our Soviet-era suitcase a little larger than a diplomat. Its dimensions were suitable for storing a heap of jewelry and trinkets, woven, but lying around idle. The badly shabby, dirty and unaesthetic appearance of the thing useful in the household left no doubt: the restoration of the old suitcase was necessary.

First, the fittings were carefully removed and placed in a can of gasoline to soak. Then the linings and ancient torn dermantine were removed. Then it turned out that the side panels that make up the frame were rotten, and the walls of the lids were generally made of thick cardboard, punched to huge holes in several places.

The cardboard is torn off and thrown away. Instead, boards of the required size were cut out of hardboard. Wooden frame sanded to white wood, a couple of walls were replaced with new ones and reinforced with glue and self-tapping screws. Hardboard covers are glued and nailed down.

So, it can be argued that we began to design a suitcase with our own hands almost from scratch.

External finishing

Dark brown dermantine was used for decoration. Dermantin is marked strictly according to the size of each case of the case, taking into account the fold on the walls of the inner sides.

Carefully cover the surface of the dermantin with PVA glue, and, accordingly, one of the lids of the suitcase. We glue the material, diligently expelling all air bubbles and excess adhesive liquid, smoothing out irregularities. We have a felt squeegee for this purpose.

Especially conscientiously we roll the material along the perimeter of the edges, so that the suitcase, made with our own hands, looks aesthetically pleasing, as if it left the factory conveyor yesterday.

The most difficult thing is pasting the corners. We deliberately do not present the patterns, because we assume that each home master there is a vision of technology quality finishes corners when restoring an old suitcase. The main thing here is accuracy, a lot of glue and diligence.

We will show a series of photographs that, we hope, will help clarify technological process pasting corners.

When the dermantin is pulled over the frame, it is recommended to walk over the seized glue with a warm iron to fix (bake) the glue. Be sure to iron it through a rag, otherwise your synthetic material will melt.

At this, the first stage of making a suitcase with our own hands, or restoring an old one, is considered complete. Therefore, we will put back its fittings.

Internal upholstery

For the interior upholstery, we will make cushions on padding polyester covered with synthetic velvet or any other suitable textile. The illustration shows the constituent parts of velvet pillows and part of the procedure for their layer-by-layer formation.

When the pillows are ready, we thoroughly coat the inner walls of the product with glue and glue it inside the pillow.

This is how our "new" suitcase, made by hand, looks like.

We did not attach the handle. In the project, to make our suitcase worn on a belt over the shoulder, like a sketchbook, but so far there is no time to search for suitable accessories and options for its fastening.

So, we have created a functional item, the practical applicability of which is not limited to storing jewelry or tools. The master class not only clearly shows how to make a suitcase with your own hands, but will come in handy as an instruction by which the restoration of an old suitcase is also feasible.

Materials and tools used in the master class:

• the frame of the suitcase with fittings;
• sandpaper, hammer, screwdriver, brush, scissors, assembly knife;
• hardboard and wooden slats (optional);
• PVA glue;
• boot nails 10 mm long;
• dermantin, cardboard, synthetic winterizer, synthetic velvet.

Time spent on restoration:

• making the product look suitable for finishing, including sanding and putty - 2-3 days;
• finishing - 2-3 hours.

DIY tool box

Tools are an essential attribute of many who are involved in different kinds homemade products. When a lot of tools are collected and due to duty or hobby you have to take them with you outside the house, a case for storing them becomes a necessary attribute. Let's clarify, a portable case. For a person who is engaged in such work, making a toolbox with his own hands becomes almost a matter of honor. We will help you with this. The result of painstaking work will be a box in which you can not only store all the tools in an organized way, but also take them on a long journey.

Step 1... The very first thing you need to do is create a toolbox project. The author of this master class used Sketchup program, you can also refer to computer programs or draw the design of the box on paper. Make all the calculations and write down the basic measurements.

Step 2... Transfer all measurements using a tape measure, ruler and chalk to a sheet of plywood. Try to arrange them as compactly as possible. Along the lines drawn, cut out all the blanks for the future box.

Step 3... Mark all the grooves with chalk, cut them out on the blanks. Use a chisel to clean any irregularities. The grooves will allow your box to hold more firmly.

Step 4... Now the structure needs to be glued. Take the glue for the main part of the drawer. Squeeze the sides firmly while gluing. With rubber strips, you will need to pull off the box of the drawer and leave it as it is until the glue is completely dry.

Step 5... Round the corners on the drawer doors.

Step 6... A durable handle must be made from MDF. To do this, its layout should be sketched with a pencil on a tree and cut out. After the handle is cut out, finish the surface of the handle. Attach to the box itself with glue and screws. If you don't want to devote time to this process, purchase a pen separately. When buying, pay attention to its strength.

Step 7... Now it's time to assemble and fix the doors and the outer cover of the drawer. With a pencil, mark the places for the loops, secure them.

Prepare a screw hole to secure the outer cover.

Step 8... To keep all the tools in their places inside the box, compartments and sections should be made. According to the principle of creating the box itself, the boxes should also be built by cutting out their component parts, making grooves and gluing them. For screwdrivers and other things, on one side of the case, make a slotted insert from a sheet of plywood. To secure other types of tools, cables and extensions to another wall, glue the Velcro. You can also take self-adhesive Velcro or put ordinary ones on hot glue.

Every man agrees that a high-quality and multifunctional tool box is an almost irreplaceable thing in the household. Many craftsmen prefer to buy a ready-made box in the nearest store, where wide range of... But such an adaptation can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, thanks to which even a beginner can cope with this task.

Classification of tool boxes

There are several main criteria due to which multifunctional products can be divided into several main groups.

According to the material from which the body is made:

By type of stored instruments:

Construction of modern boxes

Speaking about the design of such boxes, we do not mean their shape, but the way of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a box from plywood

To make a do-it-yourself toolbox out of plywood, you will need the following tools and materials:

Before starting to manufacture, you need to carefully work out the project of the future product (the drawing can be done on a computer or on plain paper). Produced necessary calculations, the main dimensions are fixed. After that all marks must be transferred to a sheet of plywood... This can be done using a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the outlined lines. And also it is necessary to mark all the grooves and cut them out on the blanks. Irregularities formed in the process of work can be processed with a chisel. It is thanks to the grooves that the final design of the box will turn out to be stronger and more durable.

The next stage is the assembly of the entire structure. To glue small parts use good quality wood glue. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly against each other. It is best to use a special rubber strip for this. You cannot remove it until the glue is completely dry. On the doors, you need to round off the corners.

Convenient handle for boxing with tools can be made of MDF. Initially, the layout is drawn directly on the wood and only then is it cut out. When the handle is ready, the surface needs to be finished. It is fastened with wood glue and screws.... If there is no desire to make a pen on your own, then you can purchase it at hardware store... The main criterion the right choice- high strength and reliability. Now you need to attach the outer drawer cover and doors. All the details are applied in their places, and then the areas for attaching the loops are marked with a pencil.

To organize the order in the drawer, you can make small compartments. All component parts are cut according to the same principle as the box. Grooves are made and glued. On one side of the box, you can make a special compartment for storing screwdrivers. The most convenient option is considered to be where this function is performed by special inserts with slots made of plywood. Velcro is attached to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

It is this option that is considered a classic in joinery. Drawings of this portable vault were printed in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Due to the simple manufacturing technology, many craftsmen still choose this option.

V classic design there are no separate compartments or special multifunctional devices. The final product will look like a neat deep box with a comfortable handle along its entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the point of the center of gravity.

A practical addition is the insert section with its own handle, the height of which occupies 50% of the entire drawer. This box can be used for small tools(awl, screwdriver, small keys), and Supplies(bits for screwdrivers, electrical tape, drills). Any type of wood can be used to make it.

Universal case made of plastic canister

If you want to make a toolbox with your own hands, but there is no plywood sheet, then you can use a regular plastic canister. For work you will need:

• Hacksaw.
• Plastic containers.
• Fasteners.

The used canister must be rectangular with a comfortable handle, which must be centered. In addition, it must be equipped with a screw cap to be used as a lock.

The process of making the box itself is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut must fall on the center of the neck and the container handle, it is best to remove the plug, and cut through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located at the top of the canister, on the end sides. Itself plastic container need to be cut from the top wall at a distance of 4 cm, and on the sides by 3 cm.

When all the cuts have been made, the canister can be opened. To do this, bend all the side parts of the top cover with the halves of the handle. In such a box, you can store various materials for fasteners: nails, bolts, screws, nuts. Upper part must be closed by folding the handles together. Such a device is fixed with a screw cap.

To make the box as strong as possible, additional gaps must be made on the end walls... Small holes are drilled in the lid itself or in the walls, into which hooks are inserted, as well as bolts with nuts.

Metal box for instruments

This option is best suited for experienced locksmiths who have necessary equipment and material. Factory metal tool boxes are made from light metals such as aluminum. As a result, the product is as light and durable as possible. But at home, working with aluminum is much more difficult.

Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the base material - galvanized steel (0.4 mm thick). From the tools you need to prepare:

• Marking vernier caliper.
• Metal elbow.
• Ruler.
• Hammer.
• Pliers.
• File.
• Sharpened core or marker.
• Anvil.

Next, a drawing and markup are made. You need to mark only those places that will need to be deleted later. Now you can start trimming with metal scissors. After trimming all that is superfluous, you should get a kind of geometric figure(winged rectangle).

Next, you need to use an anvil. By tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner, all actions should be consistent. First, one sidewall is folded, and then another. Pliers are used to wrap protruding parts.

After these manipulations, you need to walk with a hammer over the entire structure to align it. In this case, you get a small metal box for storing tools. In the future, you can experiment not only with the size, but also with the shapes of such boxes.

Almost every home has some kind of tools. When there are too many of them, you can make your own multifunctional storage box. Experienced craftsmen believe that it is such a box that is considered an integral attribute for storage various devices... Such boxes can be stored in the workshop and even taken with you on a long journey.

For quick access to tools, you need to properly organize the storage system. An organizer and a toolbox help to cope with this. They are made with their own hands from solid wood, plywood, chipboard, different types plastic and tin.

The material is selected based on the size of the product and the skills of the carpenter, each has its own advantages and disadvantages.

Domestic varieties

For stationary storage of tools, open or closed stands and roomy dressers are suitable. In these options, everything depends on their location - a garage or an apartment. In the first case, it is more convenient to organize a stand on the wall. the right sizes so that everything is openly and freely available.

For apartments, constructions with shelves or pull-out are suitable plywood boxes, wardrobes and even a suitcase. They can accommodate organizers and cases for power tools and hardware. Small stands can be built on the doors and side walls. The more correctly the filling is organized, the longer the order will be maintained.

To accommodate the main toolbox, wrenches, heads, bolts and nuts, a small container with a handle can act as mobile options. For large dimensions, you can screw the wheels to it. Then you should choose the material, calculate the acceptable dimensions, choose the model and type of fastener, draw up a drawing of the toolbox with your own hands or use ready-made offers. After that, you can start making.

In addition to safety, the do-it-yourself toolbox helps with the work. Its sorted content, when each item is in its place, allows you to find everything you need over time, without even looking inside.

The standard placement of hammer, wrenches and pliers occupies one large compartment. Screwdrivers are inserted into the holes on the horizontal strips.

Classic drawer options

This kind of DIY tool case is easy to perform. The accessories of the basic set are in sight, each in its place. It will come in handy for carrying outside the workshop. Tool carriers are heavy and should not be made large or completely out of boards. Some parts can be replaced with plywood.

Open with partition

Before starting work, make sure that the material for the workpieces is dry. For the manufacture of the first option will need the following materials and tools:

• pine boards;
• plywood;
• thermal or PVA glue;
• nails and screws;
• hacksaw, jigsaw or grinder;
• drill or brace and drill for wood;
• hammer;
• chisel;
• tape measure or ruler;
• pencil or marker.

Plywood or scraps are suitable as material. pine boards... According to the drawing, markings are made and blanks for the body are cut out. Special grooves are cut out in which the partition will stand. To organize them, you will need a milling cutter or a hacksaw with a chisel.

The drawing shows the classic dimensions, which are optimal for the assembly of the box. All blanks are cut according to the scheme, when changing one parameter, it is necessary to proportionally subtract or add from the rest:

• transverse walls - 2 pcs.;
• sidewalls - 2 pcs.;
• partition groove.

Grind all prepared elements, assemble a rectangular box. To prevent the structure from falling apart, the attachment points and the ends of the blanks are coated with glue. Additionally, the box is knocked down with small nails or twisted with screws.

A handle is cut out at the top of the plywood blank with a hacksaw, jigsaw or grinder. The prepared grooves are greased with glue. After that, a partition is installed in them.

Lining for the handle is made from the blocks. The corners of the workpieces are processed with a plane and sandpaper, and fastened with glue or nails. From wooden slats cut to the size of the partition, you need to make holders that are placed horizontally on the partition. For screwdrivers, suitable holes are drilled with a drill. Pliers, wire cutters, etc. are placed in the rectangular grooves.

The whole structure must be covered protective compound... To do this, you can use varnish or paint and varnish material with special additives.

Organizer in a stool

With this design of an organizer for tools with your own hands, you can transfer the tool to the right place and sit on it and reach a place that is slightly higher than the height. Materials and tools are the same as in the previous case. Cut from plywood:

1. Cover 550x380 mm with a cutout in the center 140x40 mm.
2. Longitudinal drawers 470x150x540 mm and a bevel angle of 75 °.
3. Two sidewalls 306x380 mm.
4. Legs and a handle are made of bars 385x40x50 mm. Saw off the bevels at an angle of 15 ° at the ends.

Assembly is done with screws. Sharp corners are rounded off with abrasive paper. The product is cleaned of dust and covered with a protective compound.

Homemade carrying type

If you want to make something more graceful with the embossed shapes of the side struts, this homemade box for tools just right. First you need to take boards with a thickness of 16 mm. Make parts from them, as in the diagram, and take a round aluminum stick or other metal tube.

Along the lines parallel to the edges, holes are drilled on the side walls for self-tapping screws to fasten the structure. Sanding paper or electric machine deburring and smoothing sharp corners... After that, the prepared parts are assembled: the bottom and sidewalls are fastened with glue and screws.

By the same method, according to the markup, vertical posts, between which the horizontal handle is fixed. Screwdriver holders are screwed on with self-tapping screws. The entire surface is cleaned of excess glue and dust.

For protection, the product is coated with varnish or paint. Once dry, the box is ready to use.

A good owner will always have a whole arsenal of tools at hand: from nails and screws to pliers, a level and a set of screwdrivers, not to mention a drill, a hammer drill and a screwdriver. Very often, simple household repairs do not begin in any way due to the fact that the master cannot find all the tools he needs in the apartment or garage. To prevent this from happening, all working tools should be stored in a specially designated place - a tool box.

What are the toolboxes, what requirements they must meet, and how to make a toolbox with your own hands - this is the article about this.

Varieties of tool boxes

Basically, a toolbox is a box with or without a lid, divided into several compartments of various sizes and shapes. Small drawers are for storing fasteners and can hold drills, tips, or other small parts. As a rule, such boxes are divided into several compartments, each of which has a separate lid. These boxes are easy to carry, because they weigh a little.

Larger cases are necessary for storing and transporting large tools such as hammers, saws, drills or jigsaws. Quite huge boxes will be needed to keep punchers, levels or mallets in them. These tool boxes are often made on wheels so that they can be moved and transported.

Professional toolboxes can vary depending on the skill of the craftsman: so a plumber needs one set of equipment, but an auto mechanic needs a completely different set. You can find similar boxes in building supermarkets or in specialized stores; they are often sold complete with the tools themselves.

Cases are divided into several categories. This takes into account not only their size, but also the design, as well as the material of manufacture. Structurally, it can be:

• Open boxes with handle for large instruments and for easy transport from one place to another.
• Multi-storey boxes with many small and large compartments for complex storage of working parts and their easy transportation. Such a box can be thrown into the trunk of a car or carried by hand.
• Compact cases with an ergonomic handle containing all the tools you need to minor repairs or a trip to the country.
• Chests of drawers consisting of several pull-out compartments, as a rule, are used permanently at the place of work.
• Tool belts are needed for those who work at heights or in hard-to-reach places.
• Carts are a kind of toolboxes on wheels that are large in size. On such devices, very large equipment is moved, such as welding machines, boers.

Important! When choosing a box for your tools, it is better to give preference to multifunctional boxes, where each part has its own place, and small compartments are closed with lids. Otherwise, all tools run the risk of mixing in one pile during transport.

What tool boxes are made of

Cases and boxes can be made from various materials, but the main requirement for them is one - the boxes should be light, since the tools themselves weigh quite a lot. There are a few more nuances that you need to know about those who buy a case for their arsenal of tools:

• The bottom of the box should be as thick as possible, since it is on it that the entire mass of contents presses.
• A full box should not deform when lifted - the walls remain perpendicular to the lid and bottom. If the walls bend, this indicates that the strength of the case is insufficient for such a set of components.
• Well, if the material of the box is fire-resistant, then expensive tools will survive even during a fire.
• If there are gaps in the box, dust and debris typical of the construction site will penetrate into the box and contaminate the tools. And even in this case, the contents are threatened with oxidation and rust due to high humidity.
• Durability is an important factor, because professional boxing costs quite a lot, and the load on it from metal components will be significant.

Today the most popular materials for such boxes, the following are considered:

Attention! All materials must comply with special standards, because if the box breaks at the most inopportune moment, all heavy tools will fall on the feet (or on the head) of the unfortunate owner.

If you can still make a metal or wooden toolbox with your own hands, then you can really only buy plastic boxes.

How to make a tool box with your own hands

If the owner decided to make a box for his inventory on his own, first of all, he needs to decide on the dimensions and choose the design of the box.

To do this, you need to inspect all your tools, measuring the most overall elements and taking into account the small things (bolts, nuts, washers, etc.). These parameters are used to calculate the dimensions of the container itself and internal compartments.

Tool box design

Speaking about the design of the boxes, they do not mean their shape, but the way of opening and the presence of additional sections. The following constructions are considered standard:

• Case - portable box rectangular shape with a handle. As a rule, cases are divided into many departments, have removable partitions that allow you to independently divide the space inside the box. The weight and dimensions of such cases are usually small.
• A container is a larger box for a variety of tools. As a rule, it has the shape of a trapezoid with a rectangular bottom. Inside this box there are also partitions, or there may be separate smaller boxes (folded like a nesting doll). The sections of such a container can be pulled up and to the sides, forming a whole "trellis" with tools and fasteners. Large tool boxes of this type can be equipped with wheels, which is very convenient and practical.
• Multiboxes are arranged vertically and drawers in them slide out along the guides, as in a regular chest of drawers.

It will be easiest to make a case for tools with your own hands, because in this design there are no complex mechanisms and hinges with the help of which additional sections move out.

Important! Although it is quite possible to build a container with boxes that fold into several floors with your own hands. To do this, each pair of "floors" should be fastened metal staples, providing the elements with mobility (as in the picture below).

Bringing the idea to life

If we talk about the material for self-made box, then, of course, the easiest way to work with a tree. For the first experience, it is better to choose inexpensive wood - planed conifers are quite suitable for boxing.

The whole process of making a tool box consists of several stages:

1. Draw up a blueprint for the future of boxing. To do this, use a regular Whatman paper and a ruler or professional program type "AutoCAD".
2. The resulting drawing is transferred to the wood using a simple pencil or marker.
3. Cut parts along the contour using a jigsaw or saw.
4. The tree is treated with antiseptic agents or stains to prevent rotting and make it "inedible" for insects and rodents.
5. The box is being assembled. Now all the parts need to be connected into a single structure, according to the drawing. To do this, it is best to use wood glue, which is applied to the ends of the parts and press them together for a few seconds.
6. It is better to additionally fix the elements of the box with self-tapping screws, making sure that the tree does not crack when screwing in the fasteners.
7. Install the lid using conventional hinges or other device appropriate for the type of box opening.
8. The lid is equipped with a handle for carrying and transporting the tool box.
9. Inside, the box is marked into sectors, taking into account the diagram and drawing. Cut out additional partitions from the board and fix them in place with glue and self-tapping screws.
10. The walls, bottom and lid of the box are sanded with several types of sanding paper, then painted or covered with several layers of varnish.

The box is ready to use, all that remains is to fill all its compartments with the appropriate tools and fasteners.

The easiest tool box

Joinery beginners are offered more simple construction tool box - a regular box with a handle, but without a lid. The advantage of such a box is that it is suitable for tools of various sizes, if desired, even a water level or a perforator can be placed here, or you can make a miniature box for an "apartment" master.

Such a box consists of only six parts:

• two long side elements;
• two short sides, the height of which should exceed the height of the long sides, since the handle will be attached here;
• the bottom, which should be made from a single piece of wood, since it is the bottom that takes the load from the weight of the tools;
• handles, the role of which can be played by a bar, bar or piece of circular cross-section - the choice depends on the size of the box and the estimated mass of its contents.

If desired, the design can be supplemented internal partitions or complicate it with compartments with lids or doors.

All elements are assembled into one structure, fixed with wood glue, then additionally fastened with self-tapping screws. Particular attention should be paid to the handle fastener - it must be strong and reliable.

You can independently assemble a toolbox not only from boards, depending on the arsenal of tools, plywood, chipboard, OSB, galvanized metal or sheet aluminum can be used.

There is nothing difficult in the manufacture of such a box, and the advantages of the product are obvious: the tools and fasteners will be in a certain place, at any time it is enough to get the box out of the closet or garage and carry out the necessary repairs.