Polystyrene foam is used in almost all industries, in particular:
- in the production of building materials for insulation, sound insulation, decorative elements;
- in the production of packaging materials;
- in medicine for the manufacture of heat-stabilizing containers;
- in shipbuilding small vessels to fill special compartments to ensure unsinkability.
The production of foam products is a fairly simple process; the technology does not require specialized education, although it is, of course, welcome. Equipment manufacturers make mini-factories on a turnkey basis - this means that it is completely ready for operation, they also provide Full description technological process, with all proportions.
Foam production
In Russia there are not many factories producing foam plastic products, and foreign products are quite popular, which have a high cost. All this speaks volumes competitive advantages this business, since demand in this industry exceeds supply, and, therefore, the owner can receive excess profits.
Components of a mini-plant, their technical characteristics
Today you can buy equipment of domestic production, Chinese and European. By price category Russian and Chinese are at the same level, but it is also necessary to take into account the cost of delivery and maintenance of equipment, because often questions about operation may arise or you may need to call a specialist installer, but it is easier to do this with a Russian company.
The AVIS-GROUP enterprise offers a mini-plant for the production of foam plastic products with the following configuration:
pre-expander – necessary for preliminary heat treatment of polystyrene foam granules to a density of 10 to 50 kg/m3. Characteristics:
- power – 2 kW;
- productivity – up to 200 kg/h;
- Hopper volume – up to 60 l;
- dimensions – 220*900*1380 mm;
- weight – 240 kg;
- bunker for drying foam granules - thanks to this process, the pressure in the mass is stabilized, a significant part of the moisture evaporates.
Characteristics:
- productivity – 25 m 3 /h;
- body material – galvanized steel;
- dimensions – 500*1350*2000 mm;
- automatic block mold – necessary for molding foam sheets. The molding process is accompanied by cooling of the mass using vacuum. Characteristics:
- productivity – up to 18 m3;
- time of one cycle – 5 minutes;
- dimensions finished block– 640*1040*2040 mm;
- dimensions – 1500*750*2300 mm;
- Block mold is an automatic vacuum installation - necessary to remove excess air in the sheet being formed, with its help the forming process is accelerated.
Characteristics:
- power – 7.5 kW/h;
- productivity – up to 3 m 3 /min;
- receiver volume – 2.8 m 3 ;
- machine for cutting foam plastic into sheets and various products required size. Characteristics:
- productivity – up to 7 m 3 /h;
- minimum sheet thickness – 20 mm;
- dimensions – 1500*Ф1300*4500 mm;
- packaging unit – wraps the finished product with PVC film.
Characteristics:
- power – 1.5 kW;
- productivity – up to 60 m 3 /h;
- dimensions of resting blocks – 600*1000*1000 mm;
waste shredder – necessary for crushing scraps after cutting finished sheets. This process is necessary for organizing waste-free production, since waste can be reused by adding to granules, but not more than 5%.
Characteristics:
- power – 7 kW;
- productivity – up to 5 m 3 / h;
- dimensions – 830*800*1300 mm.
Such a plant will cost 2,500,000 rubles.
What is needed for production and where to purchase raw materials
The basis of production is polystyrene granules - PSV-S. They are produced by polymerization of styrene, the surface is treated with substances that prevent the accumulation of electrostatic charges, which greatly facilitates storage and transportation. The following companies produce polymer raw materials in Russia:
- Gazprom neftekhim Salavat;
- Nizhnekamskkhim;
- ABC of polymers;
- Plastprom.
The cost of domestic raw materials is from 56 rubles per 25 kg.
Imported raw materials from Chinese and European manufacturers will cost twice as much, but is of higher quality. When organizing production, it is necessary to take into account that polystyrene foam granules must be stored at a temperature not lower than +18 o C and a humidity of not more than 70%. Violation of storage conditions will directly affect the foam manufacturing process.
In addition to granules, various chemical components can be added to the foam composition, which will additionally provide combustion resistance. These are various chlorine- and bromine-containing substances, but their amount should not be more than 5% of the total mass of the loaded granules.
Foam manufacturing technology
The production process involves several stages:
Calculation of profitability of a mini-plant for the production of foam plastic products
To calculate profit, the following data is required:
- cost of raw materials – 56 rubles per 25 kg;
- production of polystyrene foam from polystyrene granules - 1:1 - waste-free production;
- raw material consumption - 52 m 3 per shift (8 hours), 1248 - per month (24 working days);
- productivity - 12 kg/m 3 one sheet, 624 kg per day, 14976 kg per month;
- with such productivity, 25 packages of granules per day or 600 per month will be required;
- cost price of 1 m 3 – 25 (packages) * 56 rubles/52 m 3 (production per day) = 26.92 rubles;
- the cost of a sheet of foam plastic weighing 12 kg/m 3 is 1150 rubles;
- profit from 1 m 3 finished product– 1150 – 26.92 = 1123.08 rubles;
- profit from daily production volume - 58,400.00 rubles;
- monthly income – 58400*24 = 1,401,600 rubles;
- wages, taxes and social contributions, utility bills and other expenses should be subtracted from income - this is approximately 40%, that is, the business owner will have 840,960 rubles of net profit every month.
Mini-factory with technical characteristics, which will provide such performance, costs 2,500,000 rubles. With a stable monthly profit, which is ensured by an established sales system for finished products, the payback period can occur in the first six months of the plant’s operation. Of course, this is just preliminary calculations, it is clear that it takes time to establish sales and stable production, but proper organization You can make a net profit after the first year of operation.
Video: Foam production in the Urals
Production of expanded polystyrene and – profitable business, which has an average entry threshold. Expanded polystyrene is widely used in most different areas ah - in construction, in Food Industry, in the automotive industry.
This article will examine in detail both units for the production of conventional polystyrene foam and equipment for the production of extruded polystyrene foam; you will learn what elements the production line consists of, and the main aspects of the manufacturing technology of this material.
1 Polystyrene foam manufacturing technology
The technology for producing polystyrene foam is quite simple, and can be implemented even if there is the required minimum production equipment.
However important factor is the strong dependence of the quality of the final product on meeting all the requirements of the technology, since even the slightest overdrying of polystyrene foam, or, conversely, an attempt to cut insufficiently dried, raw material, can cause rejection of the entire batch of products (even if it is).
In general, the manufacturing technology of expanded polystyrene consists of several successive stages.
At the first stage, the raw materials from which expanded polystyrene (polystyrene foam) is produced - expandable polystyrene granules (EPS), either with your own hands or using automated equipment, are loaded into a pre-expander container.
Pre-foamers heat the granules, as a result of which they inflate, increase in volume, and turn into hollow balls filled with air.
Foaming can be performed either once or several times. When re-foaming, the process is completely repeated - the raw material is re-immersed into the pre-foamer with your own hands (or automatically), warmed up, and expanded. Re-foaming is used when it is necessary to obtain expanded polystyrene with a minimum density.
Its density depends on the density of expanded polystyrene strength characteristics and weight. In some cases, for insulation of facades and similar loaded structures, high-density polystyrene foam is required, however, as a rule, due to its lower cost, low-density polystyrene foam is in great demand.
The density of the material is measured in kilograms per cubic meter. Strength is sometimes referred to as actual weight. For example, expanded polystyrene, with an actual weight of 25 kilograms, has a density of 25 kg/m³. This is much better than with .
Polystyrene raw materials, which are foamed once, guarantee the final density of expanded polystyrene in the region of 12 kg/m³. The more foaming processes have been performed, the lower the actual weight of the product will be.
As a rule, the maximum number of foaming processes per batch of raw materials is 2, since repeated foaming greatly deteriorates the strength of the final product.
At the second production stage, foamed polystyrene enters the holding chamber, where it is aged for 24 hours. This process is necessary in order to stabilize the pressure inside the air-filled granules.
With each repeated foaming process, the curing process must be repeated. To create expanded polystyrene with a density of up to 12 kg/m³, the raw material is subject to several repeated cycles of foaming and curing.
After the raw materials have been left for the required amount of time, foam blocks are formed from the semi-finished product. This happens in a block form, inside which the granules are treated with steam supplied under pressure.
After the block is formed, the foam is again aged for 24 hours - this is necessary so that moisture is removed from the foam, since when cutting a raw block, the edges of the product will be torn and uneven, after which it goes to the cutting line, where the blocks are cut into slabs of the required sizes and thickness.
2 Equipment for production
The production line for the production of polystyrene foam includes the following elements:
- Area for storing and checking raw materials;
- Foaming unit;
- Container for aging;
- Unit for forming blocks;
- Unit for cutting foam plastic into;
- Area for storing the finished product;
- Waste processing unit.
2.1 Raw material storage and inspection area
It is important that the polystyrene raw materials used for the production of expanded polystyrene meet all quality standards, since the characteristics of the finished expanded polystyrene greatly depend on it.
As a rule, the main domestic and foreign manufacturers For the production of polystyrene foam, raw materials from the following companies are used:
- Xingda (China);
- Loyal Chemical Corporation (China);
- BASF (Germany).
Technological requirements allow for the reuse of waste (recycled polystyrene foam boards). The amount of recycled materials should not exceed 10% of the weight of the final product.
Bags of polystyrene are unloaded using an electric truck, or, in the case of small packaging, with your own hands. Raw materials should not be stored for more than three months after the date of their production. Temperature Storing foam at - from 10 to 15 degrees.
2.2 Foaming unit
This production line consists of a pre-expander (usually cyclic type), a drying unit for polystyrene foam granules, a pneumatic conveyor, and a control element.
Polystyrene from bags is unloaded with your own hands into a pre-foamer, into which hot steam (at a temperature of about 95-100 degrees) is supplied under pressure, under the influence of which the primary foaming of the raw material occurs.
The process is controlled computer equipment, which, when the polystyrene reaches a given volume, stops the steam supply, after which the semi-finished product enters the drying block.
2.3 Storage container
Granules from which it is taken excess moisture, are transported to a container for aging. In the container, through air conditioning, the specified humidity and air temperature and humidity are constantly maintained.
At temperatures ranging from 16 to 25 degrees, the granules are kept for about 12 hours. During this time, the hollow foam granules are filled with air.
The technology for re-aging, which is performed in the case of secondary foaming, is similar to the method described above, and is carried out using the same equipment.
It is the volume of the container in to a greater extent sets the nominal productivity of the production line, so the number and size of bins must be carefully calculated based on the desired production volume.
2.4 Unit for forming polystyrene blocks
From the storage container, foamed polystyrene granules are conveyed using pneumatic transport into an intermediate chamber, which is equipped with a filling sensor.
When the required number of granules arrives, the raw material is transported to the forming block. A block mold is an airtight container that, after filling with granules, is closed. Through the supply valve, hot steam is supplied to the block mold.
During heat treatment under pressure, secondary foaming of the granules occurs, which expand and, upon reaching a given temperature, are sintered into monolithic block expanded polystyrene.
Cooling of the formed polystyrene foam occurs in the same unit, by pumping air from the chamber vacuum pump. To stabilize the internal air pressure in the polystyrene foam granules, the block is kept at room temperature for 24 hours.
2.5 Unit for cutting polystyrene foam
After the required time has elapsed, the polystyrene foam block enters the cutting unit. The cutting line is a complex equipment that is capable of cutting in both horizontal and vertical planes.
This equipment has two operating modes - an automatic mode for implementing a given program, and a mode with manual control. As a rule, the entire process occurs automatically.
The cutting element of the equipment is hot strings made of refractory steel, which are capable of quickly and efficiently forming foam slabs of the required shapes and sizes.
System electronic control The installation allows you to manually adjust the filament temperature of the strings, the speed of their movement, and the size of the final product.
2.6 Waste processing unit
Expanded polystyrene materials damaged during the production process are not disposed of, but must be recycled. The processing of polystyrene foam is carried out in a unit in which crushing hammers rotate, which crush the foam slabs into individual granules.
The raw materials obtained during the processing process are fed via pneumatic transport into a storage hopper, from which the granules fall into the block mold in an amount not exceeding 10% of the weight of the primary raw materials used for production.
2.7 Production of extruded EPS
The difference in the production line for the production of extruded polystyrene foam, in comparison with the above-described technology for the production of conventional polystyrene foam, is the presence of an extruder.
An extruder is equipment for the production of extruded polystyrene foam, which has forming dies through which the polystyrene melt is pushed.
The extrusion head gives the polystyrene foam the required structure, resulting in monolithic products with closed cells with a diameter of 0.1 mm, which are superior to conventional polystyrene foam in terms of hydrophobicity and vapor permeability.
This technology provides a different approach to the foaming of raw materials, which occurs as a result of mixing granules with a foaming reagent in a nitrogen environment.
2.8 Foam production technology (video)
In this material:
The area of use of polystyrene foam is very wide. The limits of operation are not limited to packaging containers, as most citizens think. Polystyrene foam is widely used in the construction and finishing industries, medicine, various industries, etc. This leads to the logical conclusion that the production of foam plastic is a profitable business project that even young entrepreneurs can implement. A prerequisite for a successful start is a business plan for a foam plastic production enterprise, because without thoughtful step-by-step measures to organize the project and financial calculations, the idea may fail already at the preparation stage.
Description of the business idea, its relevance and advantages
The goal of the project is to organize a polystyrene foam production business in a city with a population of 500,000 or more people.
Type of project – own mini-factory with an area of 200 sq. m.
Funds – a loan or attracting a sponsor. The minimum budget is 2.5 million rubles.
Payback – from 1 year.
The essence of the business idea is simple - investing in organizing a mini-plant for the production of foam plastic, purchasing raw materials and selling finished product through wholesale networks.
The relevance of the business is explained simply; polystyrene foam is used in such areas as:
- metallurgical industry – creation of insulated pipes and other metal structures, requiring thermal insulation;
- tailoring - using polystyrene foam as insulation;
- medicine – production of containers for various needs, including transportation and storage of medicines;
- architecture – production of models;
- construction - using polystyrene foam as insulation and soundproofing material;
- logistics, trade – packaging material;
- other areas of production - furniture manufacturing, disposable tableware etc.
Despite the fact that in Russia there are several large factories for the production of foam plastic, the relevance of small and medium-sized businesses of regional importance in this area does not cease to be relevant.
Advantages of the project:
- The demand for products - polystyrene foam, in fact, is considered consumables, used for packaging and insulation. Wide demand is explained by low cost and widespread use for various needs, which cannot be said about other materials with similar characteristics.
- Ease of production - modern equipment allows you to easily produce required amount products of any shape and quantity depending on the wishes of the customer.
- Environmentally friendly - polystyrene foam is made from environmentally friendly pure materials, which cannot be said about chemical compounds alternative products with similar characteristics.
Reference. The main advantage of the foam production business is minimum costs on raw materials with a high markup on final products. This results in high income and quick payback of the project.
Foam production technology
The production of polystyrene foam is a completely automatic process, requiring only the control of the machine operator.
The work process looks like this:
- Loading raw materials - polystyrene granules are used.
- Activation of the pre-foamer - the device supplies steam to achieve the desired volume of granules.
- Drying – the granules are moved to a special compartment for complete drying.
- Maturing - after drying, the raw materials must be aged for 12 hours.
- Shape creation - the granules are moved to a hopper where they are exposed to a vacuum, which creates the desired shape.
- Unloading blocks - the finished foam is fed to the platform.
- Cutting – products are cut according to specified dimensions.
Reference. The cut pieces of foam are not thrown away, but are reused, so we can safely say that this is a waste-free production. The ratio of raw materials and finished foam for the manufacture of new products is 8:1, respectively.
Raw materials
Polystyrene granules are used to make polystyrene foam. The most popular brand is PSB-S 25F, which has a long shelf life, aging period and quality of the final product, optimally suited for most uses.
Other brands of polystyrene:
- PSB-S15;
- PSB-S25;
- PSB-S50.
The cost of 1 kg of polystyrene ranges from 50–70 rubles, which depends on the supplier (China or Russia), as well as on the brand of raw materials. To produce 1 cubic meter of polystyrene foam, 15 kg of polystyrene is required. It is easy to calculate the cost of production - 15 * 70 = 1,050 rubles.
In retail, the cost of foam plastic is from 300 rubles per sheet or 1,500 per package, which also depends on the thickness of the material. Again, it’s easy to calculate the markup on the product and the payback period for the entire project if there are regular customers.
Market analysis: target audience, competition and risks
There are several ways to analyze the market for foam manufacturers:
- searching for information on the Internet;
- visiting large construction supermarkets in the city and obtaining information about the foam manufacturer;
- a combination of two methods.
As a rule, more than 80% of entrepreneurs involved in the sale of building materials purchase finished products from suppliers. Hence, there is a high markup on the product, which includes built-in costs for transportation, inflation, wages and much more. Such entrepreneurs cannot be considered competitors, although in the end they sell the same product.
It is necessary to identify direct producers of polystyrene foam in the region, determine their level of business (operation period, scale of activity, price segment) and compare with your indicators. If possible, it is necessary to set the price of the product no higher than competitors, and preferably 3–4% lower.
Target audience of the project:
- construction companies;
- metallurgical industry;
- advertising business for the installation of external structures;
- manufacturing enterprises of various types;
- logistics related companies;
- businessmen who own catering outlets;
- shops, supermarkets, shopping centers.
Depending on the scale of the project, a businessman can cooperate with either one intermediary or several at the same time, fulfilling orders for the production of foam plastic for different areas of activity.
Possible business risks:
- Poor quality raw materials - the problem is solved by changing the supplier, as well as constant monitoring of product quality.
- Failure or premature wear of equipment is a risk typical for used equipment, as well as in the absence of a warranty from the seller.
- The human factor - violation of foam plastic production technology directly depends on the employees of the enterprise, therefore, in order to exclude any emergency situations, it is necessary to carefully select personnel, conduct training and periodic tests on knowledge of their duties.
- Competition is a serious risk, especially if a competitor appears after the enterprise has started operating. In this case, the entrepreneur needs to review in detail the financial plan of the business project, analyze opportunities to reduce the price, and also launch advertising campaign and create new offers on the market.
- Financial crisis in the country and the world - the solution to the problem is to regularly monitor the state of the economy in the country, exchange rates and other nuances, including the political situation, which can directly or indirectly affect business.
Reference: 99% of all existing and potential risks are absolutely solvable by following the project’s business plan, conducting market and competition analysis both in the region of work and in the country as a whole.
Organization of a foam production business
Registration of activities
The production of polystyrene foam involves working as an individual entrepreneur or LLC. The choice between the two forms depends on the entrepreneur and the size of the business. For example, for a mini-factory with an area of 200 sq. The status of an individual entrepreneur is quite suitable, but some problems may arise with the sale of products. Large companies they fundamentally do not work with individual entrepreneurs, but in fact, small businesses cannot handle multimillion-dollar contracts due to the limited project budget.
A legal entity (LLC) is optimally suited for the operation of a larger enterprise, which in the future aims to reach clients not only in the region where it is located, but also in neighboring regions of the Russian Federation.
Registration procedure entrepreneurial activity in both cases it is almost the same - collecting documents, submitting papers to the tax service, waiting for a decision. A business certificate is issued within 5 days.
OKVED code – 25.21 (production of plastic products).
Taxation system – simplified tax system or UTII.
Production room
The optimal area for a foam plastic production workshop is 100 square meters. m. In this case, it is worth taking into account the administrative part of the premises (up to 25 sq. m) and the warehouse (40–60 sq. m). As a result, the entrepreneur needs to rent a building of at least 200 square meters. m.
Premises requirements:
- lack of humidity;
- absence of rodents and other pests (appropriate treatment is carried out before starting production);
- a small distance of the enterprise from the city infrastructure - if possible, you need to rent premises within the city, but a location of up to 5–10 km from a populated area is allowed;
- availability of convenient access for freight transport, including multi-ton trucks;
- availability of nearby municipal transport links for the convenience of staff.
Search for suppliers of raw materials
Polystyrene in Russia is produced and supplied by several large factories, as well as intermediary firms. Exact addresses and contacts can be found on the Internet, and you can also study reviews about each supplier and product supplied.
An alternative option is to order raw materials from China. Today this is the maximum affordable option, and Chinese polystyrene is no different from domestic one, but at the same time it costs less. As always, an entrepreneur needs to choose.
Purchase of equipment
The technical equipment of a mini-plant for the production of foam plastic can be purchased either as a set or separately. For the workshop standard type, whose products are foam sheets of various thicknesses and shapes, you will need:
- pre-foamer;
- bunker for receiving raw materials;
- block compartment;
- tables for cutting products;
- steam supply devices;
- unused foam shredders;
- vacuum device;
- system control panel;
- additional equipment for installing the machine and equipping it with separate blocks.
Staff
For a mini-plant for the production of foam plastic with 1–2 units of equipment, at least 4 service personnel will be required. Provided that the work will be carried out in 2 shifts, the number of workers increases to 8 people.
Minimum staff:
- handyman – 8 people;
- technologist – 1 person;
- accountant – 1 person;
- cleaner – 2 people;
- watchman - 3 people.
In the future, it makes sense to purchase freight transport and hire 2-3 drivers to deliver products to the customer.
Search for sales channels for finished products
You can sell polystyrene foam in several ways:
- wholesale trade with non-regular customers;
- retail trade through its own network;
- production of polystyrene foam to order.
Considering that more than 75% of the target audience of a business is construction area, you need to orient yourself in this direction. A broad advertising campaign will help you find clients:
- commercials on TV and radio;
- own website;
- outdoor advertising in the city and suburbs;
- advertising in construction catalogues;
- leaflets, booklets in construction stores;
- getting in touch with construction companies.
Reduced prices, the availability of favorable offers and high quality products will allow you to quickly find customers for a long time.
Financial calculations
Investments to start production
Initial investment (in rubles):
- 150,000 – conclusion of a premises rental agreement;
- 200,000 – repair and preparation of the building for work;
- 1,000,000 – purchase of equipment;
- 100,000 – arrangement of the manager’s office, purchase office furniture and technology;
- 150,000 – purchase of raw materials;
- 15,000 – registration of business activities;
- 50,000 – advertising;
- 50,000 – market analysis and search for sales channels.
Result: 1,715,000 rubles.
Current expenses
Expenses in the first month:
- 150,000 – rent of premises;
- 400 000 – wage(15 people);
- 40,000 – utilities;
- 100,000 – reserve fund.
Result: 690,000 rubles.
Income and profit calculation
The income of a foam plastic production business consists of the volume of finished products and turnover. On average, the mini-plant produces 50 cubic meters of foam plastic per week. The cost of one cubic meter of products is 5,000 rubles. Profit per week – 250,000 rubles. Monthly income – 1 million rubles.
The enterprise’s net earnings are 200–250 thousand rubles, since it is worth deducting mandatory monthly expenses and taxes from 1 million rubles.
The payback period for the project will take 10–12 months.
When planning to open a polystyrene foam production business, you need to remember not only the numerous positive aspects project, but also about potential risks. Perhaps the selected region or specific locality is not suitable for this type of activity. It may also be that the funds taken on credit are not enough to complete the activities started. There are many nuances, so a business plan is not just important and necessary thing, but a direct solution to potential problems.
Order a business plan
 | Investments: Investments 450,000 - 600,000 ₽ URAL-STROY operates on the market construction services since 2008. The company is engaged in private housing construction. Ural-Stroy adheres to the strategy of “Quality and openness to the client”, thanks to which it is a leader in the cottage construction market. We build modern, comfortable houses Full construction. Our Goal: To become a developer - No. 1 in Russian Federation in the segment low-rise construction. Join us and together we can develop... |
 | Investments: Investments 2,300,000 - 3,500,000 rubles. The construction and production franchise "Stroymatik" invites you to engage in a truly innovative business. Earn money by installing reinforced concrete piles for low-rise construction using the unique compact pile-driving installation "Stroymatik SGK-200". The idea of forming a franchise was born in 2015, after the opening of the first branch in Cherepovets, a city where the Stroymatik production site is located on the local industrial site. The company’s know-how is a compact mini-installation created on the basis of… |
 | Investments: Lump sum from 99,000 to 249,000 rubles + startup costs from 30,000 rubles The unified service for ordering special equipment STROYTAXI was formed in May 2013. At the time of its formation, it was the only dispatch service for ordering construction and special equipment that could be called a company, with 3 people on staff. In the year and a half we have been in the market, we have experienced many ups and downs. Fortunately, there were more ups and downs along the way, so... |
 | Investments: From RUB 1,000,000. up to 3,000,000 rub. New buildings are springing up like mushrooms after rain, but how can you find out about the quality of housing, floors and quickly choose the right layout for yourself? Of course, contact the Union of Developers, where they work best experts on real estate and give to the population free consultations. About the company "Union of Developers" is a kind of intermediary between end consumers and construction companies. The employees of this company make... |
 | Investments: from RUB 250,000. The Stroymundir company is a manufacturer of high-quality workwear for various fields production, security, industrial enterprises and rest. As a manufacturer, Stroymundir can provide an unlimited range of finished products and a wide range of fabrics. We can also develop a design according to your wishes and apply a logo of any complexity, which will give an advantage and individuality to your customer. "Stroymundir" uses unique technologies, strictly complying with Russian State Standards,... |
 | Investments: 500,000 - 1,000,000 rubles. The Stroy Artel company was founded in 2000. Its founders were proactive and creatively thinking people with significant experience in various sectors of the economy. Even at the first stage of the company's development, a simple principle was adopted as a strategic guideline - life means action. From the very beginning, the management of Stroy Artel was determined to act, and to act in a balanced, thoughtful manner... |
 | Investments: Investments from 460,000 rubles. Polyglots is a federal network of Children's Language Centers, where children from 1 to 12 years old study foreign languages. The company's Methodological Center has developed a unique program, thanks to which children begin to speak and think in foreign language. We care about the comprehensive development of our little Polyglots, and offer additional classes in mathematics, creativity, literature, natural sciences,… |
 | Investments: Investments 3,350,000 - 5,500,000 ₽ New Chicken is a new project of the BCA restaurant holding, which has experience opening more than 150 establishments in 8 countries around the world. The company is actively growing, developing new directions and knows what consumers need tomorrow. The company promotes a network of establishments using a franchising model. Franchise description The franchise package includes: production/trade/assembly equipment, furniture. The New Chicken franchise has… |
 | Investments: Investments 6,500,000 - 10,000,000 ₽ The idea of creating a wine bar with a high-quality assortment and reasonable prices was born to Evgenia Kachalova in 2013, after some time, which took her to understand the holistic concept, search suitable place and teams, the first Wine Bazaar has appeared in Moscow! In May 2014, the Bazaar on Komsomolsky Prospect opened its doors and guests immediately fell in love with it. Everyone liked... |
 | Investments: Investments 550,000 - 1,000,000 ₽ COMPANY DESCRIPTION The network of laser hair removal studios Laser Love was founded in 2018 in Novosibirsk. The company group has a distribution company responsible for supplying equipment directly from the manufacturer. The company has all quality certificates for equipment - certificate of conformity and the European Union. Our own line of equipment under the DF-Laser brand guarantees the quality of the procedure from the first visit. Own marketing agency in… |
 | Investments: Investments 190,000 - 460,000 ₽ |
 | Investments: Investments 1,490,000 - 3,490,000 ₽ The BestWay Car Service Network is a network of body and mechanic repair stations, which was founded in November 2014. Facts: Over 4 years, we opened 14 stations in 8 regions of Russia - in Nizhny Novgorod, Kazan, Rostov-on-Don, Krasnodar, Ivanovo, Yaroslavl, Vladimir, Dzerzhinsk. In 2017, the group’s cash turnover amounted to 211 million rubles. In 2018... |
"is an expert with a proven reputation over the years. For every client who strives to add variety to his life, using for home, office space, trading platform, garden highly aesthetic products made of polystyrene foam, the leading company "TOP-Penoplast" is ready to become a reliable partner and friend.
Our products will help not only to attract attention to your company, but also to brighten the exhibition and interest potential clients through the use of a modern, bright, memorable and effective advertising product.
We will help you make any of your dreams come true using only polystyrene foam. With its help it is possible to recreate anything you want, be it:
- decorative elements for finishing facades;
- logos for shop windows;
- theatrical scenery and ensembles of individual elements for performances;
- three-dimensional letters in the form of the names of the newlyweds or signs for a photo shoot;
- figured products for corporate events, New Year and themed holidays;
- a dummy of the product sold by your company with a structure height of up to three meters.
The company’s specialists are ready to provide advice regarding installation ready-made structures and products made of polystyrene foam. If necessary, we can provide installation and assembly services ourselves. In addition, “TOP-Penoplast” includes an item for creating an individual drawing based on the client’s wishes, taking into account the scope of application of the products.
Over the course of many years of activity, our company has managed to create its own unique concept for the production of polystyrene foam products, which ensures profitable and truly comfortable relationships with clients.
Advantages of the TOP-Penoplast company
Along with other competing companies, our company has a number of undeniable advantages:
Affordable prices
Artificially inflating prices and profiting from clients is not our prerogative. We are FOR producing high-quality products at the lowest possible cost. Therefore, over many years of existence, we have a large base of clients who come back again and again. In addition, we were able to significantly reduce costs through the use of more modern technologies in production.
Modern equipment
Product installation
Short deadlines
Individual approach
The wishes of our clients and the needs of our customers are of particular importance to us. Therefore, we approach each order with responsibility, trying to take into account as much as possible taste preferences and the specifics of the business area. At the same time, we leave a lot of opportunities for our clients for self-realization and the implementation of their ideas, while simultaneously providing consultations at the request of the customer. Both legal and individuals who contact our company can be directly involved in the creation and development own project, as well as make your own adjustments and supplement the drawings at any stage.
High quality products
Fast delivery
experience
Qualified specialists
The TOP-Penoplast company is a team of craftsmen who have professional experience and, importantly, love their work. Our team is represented by diligent craftsmen with knowledge of various specializations. These are professional sculptors with a diploma of higher art education, creative marketers, and experienced designers. The team is also complemented by qualified employees of various specialties who are responsible for individual stages of its production so that the products fully comply with production standards and the wishes of the client.