Job description carpenter is created by the employer to determine the range of functions of the specialist, his rights and area of responsibility. This document is not binding, but it is recommended for use by letters from Rostrud, is used in labor litigation, and business practice shows the advantages of its use, especially in large companies with a wide variety of employees.
Sample job description for a carpenter
1. General Provisions
- The carpenter reports to the Deputy Director for ACh.
- A carpenter is hired and fired by order of the director of the organization, on the recommendation of his deputy for ACh.
- In the event of a carpenter’s temporary absence (vacation, illness, etc.), his functions are transferred to another employee appointed by the Deputy Director for ACh.
- A carpenter receives permission to work after undergoing training in fire safety and labor protection, as well as after a successful medical examination.
- A candidate for a carpenter position must meet the following standards:
- secondary (secondary specialized) education;
- One year of experience in wood processing.
- A carpenter is required to know the following:
- fire and technical safety;
- woodworking techniques;
- methods of applying antiseptic and fire retardant compounds to wooden surfaces;
- dismantling rules simple designs from timber;
- methods for assessing the quality of timber used;
- rules of use hand tools for wood processing;
- wood flooring processing standards;
- standards for timber consumption;
- main types of lumber joints;
- methods of gluing wooden surfaces;
- methods for determining wood moisture content;
- types of nail connections and methods of working with nails;
- varieties technical documentation used in carpentry work;
- characteristics of the main tree species;
- components of wooden parts in buildings and structures;
- types of calculations, drawings and sketches used in carpentry;
- seasonal features of working with timber;
- criteria for assessing labor results;
- methods for identifying defects and eliminating them;
- methods for preparing timber surfaces for work;
- rules for the use of work equipment, materials and workwear.
- The carpenter is guided in his work by the following principles:
- current regulations and laws;
- profile documentation of the organization;
- contents of this manual.
2. Functions
A carpenter performs the following functions at work:
- Performs carpentry work to the required extent using saws and other tools.
- Cleans timber surfaces and prepares them for further use.
- Installs and dismantles elementary wooden structures.
- Participates in the construction of temporary structures made from timber.
- Participates in the movement of lumber weighing up to 0.5 tons using appropriate equipment.
- Provides wall cladding with appropriate wood covering, and also arranges plank coverings.
- Applies to wooden parts antiseptic and fire retardant compounds.
- Engaged in sawing timber, sorting and stacking it.
- Produces necessary calculations, works with the required sketches and drawings.
- Work with wooden walls, frames, supports.
- Performs the necessary actions for gluing wooden surfaces.
- Eliminates noticed defects and shortcomings in carpentry work.
- Treats work tools, equipment, and workwear with care.
- Complies with labor protection, fire and technical safety rules in the workplace.
- Informs its managers about problematic issues in labor activity.
- Assists other employees of the organization within the scope of his/her competence.
3. Responsibility
A carpenter can be held liable on the following grounds:
- For non-compliance current laws, administrative and industry norms and standards - in accordance with sections of labor, criminal and administrative law.
- For material damage received by the employing organization through its fault - within the limits specified in the sections of the relevant legislation.
- For failure to comply job functions, fixed in employment contract and this instruction - in accordance with the provisions of labor law.
4. Rights
The carpenter is endowed by the employer with the following rights:
- Make proposals to optimize the conditions of your labor procedures.
- Require the management of the organization to maintain the conditions necessary for high-quality execution your work.
- Receive from employees of the organization the data required in their activities.
- Receive appropriate work equipment, clothing, and tools from the employer.
- Have access to the criteria by which their work achievements are assessed.
- Stop work when absent from site necessary conditions for occupational safety.
FILES
The main components of writing instructions
Since there are no provisions in labor legislation regulating the content of a job description, employers can create a document based on their needs. Usually they adapt standard instructions, supplementing them with the provisions of suitable professional standards, while being guided by the rules of business document flow.
The most common type of instructions contains four parts:
- General section.
- Functional responsibilities of a specialist.
- Parameters of his responsibility.
- His work rights.
Some employer companies, especially those in large businesses, add additional sections:
- Features of work activity.
- Parameters of job connections.
- Criteria for assessing employee achievements.
- Qualification requirements.
Including additional sections makes sense if the company employs many employees in a variety of positions or if the instructions are being prepared for narrow specialists on whose success the entire company depends.
Attention! The carpenter has different levels qualifications. To determine what is required, you can use paragraphs 329-334 of the Unified Tariff and Qualification Reference Book (UTKS), which describes grades 2-7 of a carpenter, and professional standard 40.181, which defines three main skill levels.
General section
The introductory part of the instructions, which lists the general aspects of work activity. Here they write:
- Procedure for temporary replacement of an employee.
- Parameters of his hiring and firing.
- Subordination order.
- Requirements for skills, work experience and other parameters.
- What standards should he follow in his work?
- Other parameters not included in the following parts.
Of particular importance are the requirements for practical and theoretical knowledge, which must correspond to the tasks solved by the employee, and which are outlined in the next part.
Attention! To describe the parameters of the carpenter's profession, professional standard 40.181, approved by the Ministry of Labor on April 21, 2017, can be used. Application professional standards Mandatory for use in budgetary organizations and is advisory in nature for private businesses. Their use is regulated by Art. 195.1-195.3 Labor Code of the Russian Federation.
Responsibilities
The key part of the instructions, which details the job responsibilities mentioned in the employment contract. If the main functions of an employee - for example, carpentry work for a carpenter - are the same in a variety of companies, then auxiliary functions vary depending on the size of the employer, the number of employees and other points.
Separately mentioned are the functions of complying with fire and technical safety standards, labor discipline, which are required for a wide variety of professions.
Responsibility
Since the job description is not intended to determine the specific punishment of an employee, as well as the degree of his responsibility, this section is drawn up in a general manner. It usually includes 3-4 violations for which the employee can be held administratively or legally liable as a result of appropriate proceedings.
Rights
The contents of the section should not repeat paragraphs of Article 21 of the Labor Code of the Russian Federation, which provides the basic labor rights of an employee. Rather, here we're talking about O additional features for an employee, the specific volume of which depends on his position in the company, corporate labor policy and other points.
- Writing a draft version, based on standard samples and relevant professional standards.
- Discuss it with specialists: lawyer, HR manager, future colleagues.
- Preparation of a revised version and its approval by managers.
- Signing final version head of the organization.
- Signature by the employee himself.
Attention! The job description must contain the main features of an official document: details of the organization, information about the employee, transcript of signatures and other components.
A carpenter is a construction worker civil works, which specializes in carpentry work, creating workpieces wooden elements for various purposes, installation load-bearing structures wooden buildings and structures, performing work on the installation of scaffolding, scaffolding, formwork, repairing carpentry structures, supervising teams of carpenters in the construction, repair and reconstruction of buildings and structures.
In accordance with ETKS and depending on the category, the carpenter performs the following work:
- 2nd category: Carpentry and formwork work. Carrying out work on the device roll roofing dry with nailing and roofing made of piece materials. Manual processing of timber: cross-cutting, debarking, trimming. Lubrication of rolls and formwork. Brush coating wooden structures and parts antiseptic and fire retardant compounds. Tarring, upholstery of wooden structural elements with felt and roofing felt. Dismantling the formwork of foundations, walls and partitions. Dismantling of fences, bridges and decking. Dismantling of floors, rebounds and roll-ups. Dismantling fence walls. Cleaning formwork from concrete and mortar. Cleaning rolls roofing materials from the sprinkles. Sorting of piece roofing materials. Caulking of walls and window openings.
- 3rd category: Carpentry and formwork work. Dry covering of simple shaped roofs with rolled and piece roofing materials.
- 4th category: Carpentry and formwork work. Covering roofs with piece roofing materials.
- 5th category: Carpentry and formwork work.
- 6th category: Performing complex formwork work. Installation of formwork for vaults, shells and domes. Assembly and installation of bridges with a span of over 50 m. Production of templates for marking the jambs of bridges. Assembly of arch formwork boxes. Assembly and installation of construction trusses and beams over 15 m.
- 7th category: Performing complex carpentry work in low-rise cottage construction, as well as during the restoration of monuments of wooden architecture in the construction of unique objects. Production and restoration of wooden kokoshniks, platbands, towels and other complex elements according to ready-made samples, drawings and sketches.
Characteristics of the work.
Removal of parts, disassembly and replacement of individual simple components during the construction and repair of ships, yawls, and boats. Rough cutting, planing of logs into two, three and four edges, cross-cutting. Cutting and sealing holes in wooden bulkheads for pipelines. Performing simple wooden joints details. Manual coating of timber and parts with antiseptic and fire retardant compounds. Sorting of suitable material. Cleaning the running skids and formwork from concrete and mortar. Clearing the grooves of sides, bottoms, decks from caulking and preparing for caulking. Filling grooves on ships and boats with pitch and resin, cleaning, tarring surfaces. Combing strands by hand. Dismantling of wooden and metal (from ready-made elements) scaffolding up to 3 tiers. Carrying out work in the manufacture, assembly, installation of components and parts of ships, boats, wooden scaffolding, simple formwork work and work on band saws, circular saws, planing machines under the guidance of a more highly qualified ship's carpenter.What you should know:
- main properties of wood used in shipbuilding
- methods of rough processing of materials
- name and purpose of wooden parts of metal and wooden ships, yawls and boats
- types of wooden joints and their application
- methods for dismantling simple wooden structures while preserving materials and sorting suitable materials
- rules of work when performing simple connections along and across the fibers according to markings or simple templates
- methods for cleaning formwork from concrete and mortar
- rules for performing simple work on formwork and stripping
- adhesive compositions, their purpose and methods of application in shipbuilding and ship repair
- rules and methods for cleaning the nozzle of the skids
- purpose and conditions of use of the most common special devices
- rules for using hand-held electrified and pneumatic tools
- tow varieties
- manual methods and techniques for caulking work
- purpose and conditions of use of tools and devices used for caulking work
- purpose of band saws, circular saws and planers
- rules for reading simple drawings.
Work examples
- Logs, boards, beams - preliminary hewing and planing by hand.
- The manhole openings are lining.
- Fire and emergency boards - production.
- Temporary wooden frames for awnings - production, installation.
- Keel blocks, straight and patterned cages - disassembly with preservation of materials.
- Wooden flooring metal shelving and tubular scaffolding, panel floors, transition ladders - dismantling.
- Rigid and semi-rigid plasters - production of a wooden frame.
- Bulkheads, wooden ship enclosures - dismantling, preserving and sorting the material.
- Skirting boards from coniferous species wood - installation on nails.
- The supports under the ship's hull are embossed.
- Residential and service premises - dismantling the casing (on the sides and ceilings) and removing the pavement for disposal.
- Slats for keel blocks and cages for marking the main line - fastening.
- Foot gratings made of soft wood - production, installation.
- Fish in the holds, waterways - disassembly.
- The side and keel sections on the transverse beams are knockouts.
Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Issue No. 3 ETKS
The release was approved by Order of the Ministry of Health and Social Development of the Russian Federation dated 04/06/2007 N 243
(as amended: Orders of the Ministry of Health and Social Development of the Russian Federation dated November 28, 2008 N 679, dated April 30, 2009 N 233)
A carpenter
§ 329. Carpenter 2nd category
Characteristics of work. Carpentry and formwork work. Performing work on installing dry roll roofs with nailing and roofing made from piece materials. Manual processing of timber: cross-cutting, debarking, trimming. Lubrication of rolls and formwork. Brush coating of wooden structures and parts with antiseptic and fire retardant compounds. Tarring, upholstery of wooden structural elements with felt and roofing felt. Dismantling the formwork of foundations, walls and partitions. Dismantling of fences, bridges and decking. Dismantling of floors, rebounds and roll-ups. Dismantling fence walls. Cleaning formwork from concrete and mortar. Cleaning rolled roofing materials from coating. Sorting of piece roofing materials. Caulking of walls and window openings.
Must know: the main types of timber used and the properties of wood; methods of rough processing of timber; rules for handling antiseptic and fire retardant compounds and methods for coating wooden parts and structures with them using brushes; methods for dismantling simple wooden structures and cleaning them; rules for moving and storing light weight cargo; types of rolled and piece roofing materials; methods for dismantling simple roofing coverings made of rolled and piece materials.
§ 330. Carpenter 3rd category
Characteristics of work. Carpentry and formwork work. Dry covering of simple shaped roofs with rolled and piece roofing materials.
1. Civil works
Making simple panels for partitions under plaster. Lathing device. Longitudinal sawing of materials. Dismantling temporary buildings. Cladding of walls and ceilings for plaster and cladding. Installation of the lower plank flooring in two-layer floors (subfloors). Installation of skirting boards and fillets. Installation of pick-up and repair of plinths. Filling joints with sealing compound. Installation of temporary fences and gates. Application of antiseptic and fire retardant compounds to wooden structures and parts using paint guns and sprayers. Construction of wooden drainage wells, trays, etc. Manufacturing and repair of simple construction equipment. Hewing logs into edges and round, trimming the edges of boards and plates. Trimming the ends of the logs. Clean cutting of timber, removal of grooves, ridges and quarters. Processing of timber with electrified tools. Dismantling of sheathing and wooden roofing. Laying planks and planks. Manufacturing of floating grating. Covering the walls of rows and ice cutters with boards. Preparation of single piles, installation of yokes and shoes on the piles. Sawing off pile heads and tops of sheet piling rows. Preparation of single-column supports for communication and power lines. Finishing surfaces with dry plaster. Covering and repair of pitched and gable roofs roll materials dry with nailing, asbestos-cement sheets or tiles (slate) and repair of roofing coverings from these materials. Lining of overhangs and junctions. Dismantling the scaffolding.
2. Formwork work
Production and repair of rectilinear formwork panels (rectangular and oblique) and rectilinear formwork elements of all types. Blank simple elements scaffolding supporting the formwork, without extension. Dismantling of formwork for floors, beams, columns, ice cutters, beam span and superstructure of bridges.
Must know: main species and defects of wood; design of an electrified tool and rules for its use; techniques for clean sawing of timber; rules for trimming logs, preparing single piles and single-column supports; methods for preparing straight formwork panels and partitions for plaster; methods for constructing plinths, planks, partitions, black sheathing and roof elements; methods for preparing antiseptic and fire retardant compounds; arrangement of devices for applying sealing mass; methods of applying antiseptic and fire retardant compounds using paint guns and sprayers; basic properties of rolled and piece roofing materials; marking methods simple roofs and covering them dry with rolled and piece roofing materials.
§ 331. Carpenter 4th category
(as amended by Order of the Ministry of Health and Social Development of the Russian Federation dated April 30, 2009 N 233)
Characteristics of work. Carpentry and formwork work. Covering roofs with piece roofing materials.
1. Civil works
Device wooden partitions. Assembly and installation of wooden parts, elements and structures of residential and industrial buildings. Preparation, assembly, installation, disassembly and replacement of mauerlats and rafters. Cutting internal walls from logs. Construction of temporary structures: terraces, verandas, vestibules, porches, as well as sheds, sheds, guard booths, offices, passages, storage rooms, showers, latrines. Device and change wooden bases. Device frame walls. Clean walls and ceilings. Arrangement, relaying and joining of upper plank coverings (clean floors) from individual boards. Installation of floors made of bars, laminated boards, fibreboards, end block, from particle boards with sealing of joints. Fastening joinery to reinforced concrete parts using mounting piston guns. Installation of window and door frames, blocks and window sill boards. Installation of plastic windows and balcony doors with filling the gap between the frame and the wall with polyurethane foam. Installation skylights. Installation of laminated doors with a telescopic frame. Installation of clean fences. Dry antiseptic. Antiseptic and fire-retardant impregnation of wooden structures and parts in bathtubs. Installation of bandages on poles. Manufacturing, laying, disassembling and changing joists, beams and purlins. Change of interfloor and attic floors. Construction of scaffolding, scaffolding and overpasses without extending racks. Installation of block scaffolding. Repair of frame walls, floors and plank roofing. Arrangement of angled connections using notches, plate dowels and keyed connections. Construction of sleeper cages for heavy structures and equipment. Alignment and wedging of rolling tracks when sliding bridge spans. Manufacturing and staging of contractions on piles or racks, liners and ties, struts, braces and ice cutter rafters. Manufacturing of crossbars and installation of key beams on piles. Installing the ice cutter blade. Laying thrust beams and securing them with attachments. Manufacturing and laying of mauerlat beams on supports, crossbars of security and wheel guard beams. Preparation of wooden sheet piles and packages. Manufacturing and installation of headstocks (cuts). Laying nozzles on lighthouse piles and sheet piles. Preparation and assembly of A-shaped, three-post and U-shaped wooden supports communication and power lines. Covering and repair of three- and four-slope hipped, mansard, hip, T- and L-shaped roofs with asbestos-cement sheets and tiles (slate). Lining of overhangs, junctions, ridges, ribs and dormer windows. Device wooden frames For suspended ceilings all types and wall coverings. Installation of suspended ceilings on wooden frames made of acmigran tiles, aluminum slabs, AGT slabs, etc. Covering walls and ceilings with wood fiber and particle boards (except for decorative ones). Installation of small molds manufactured in the factory.
2. Formwork work
Construction of scaffolding supporting the formwork. Installation of formwork for columns, beams, floor slabs, walls and partitions, foundations, massifs, frame posts and purlins. Manufacturing and installation of jacking frames, caps, panels for sliding formwork and working flooring. Production and repair of formwork panels for arrays of offshore hydraulic structures with longitudinal and transverse hatches and large-panel formwork panels with ribs. Installation of flooring in flexible joints from boards and beams. Dismantling the formwork of arches, domes, vaults, shells, reservoirs, tanks, bunkers, spiral chambers, suction and supply pipes, as well as scaffolding supporting the formwork. Installation of suspended formwork for floors.
Must know: the main elements of wooden parts of buildings and wooden structures and the requirements for their quality; methods of constructing wall frames, sheathing and temporary structures; methods for preparing sheet piles; methods of connecting parts using simple cuts; dry antiseptic methods; methods of impregnation of wooden structures and parts with antiseptic and fire retardant compounds in bathtubs; methods of marking and covering roofs; requirements for the quality of piece roofing materials and coatings; device of assembly piston guns and rules of their operation.
§ 332. Carpenter 5th category
Characteristics of work. Carpentry and formwork work.
1. Civil works
Cutting external walls from logs and assembling houses from logs, beams and panels. Production of glued structures using notches, dowels, nail, bolt and key joints. Assembly and installation of suspended rafters and roof trusses, as well as arches and beams with a span of up to 15 m. Installation of skylights. Construction and dismantling of scaffolding and overpasses with extension of racks. Changing the crowns of walls made of logs and beams. Cutting and sealing openings in walls made of logs and beams. Impregnation of wooden structures and parts with antiseptic and fire retardant compounds using compressor units. Manufacturing and installation of frame supports. Manufacturing and assembly of beam bridge spans. Assembling rows of beams and cutting rows of logs. Manufacturing, laying and installation of structural elements of pier bridges, struts, crossbars, girders, strut cushions, railings and fire protection platforms. Moving, launching and installing ridges on the target of the structure. Manufacturing and assembly of wooden headframes. Preparation and assembly of wooden AP-shaped supports for communication and power lines.
2. Formwork work
Installation of formwork for galleries, reservoirs, tanks, bunkers, crossbars, high supports. Assembly and installation of circled bridges with a span of up to 50 m. Construction of multifaceted and curved formwork. Installation of formwork for columns of variable cross-section. Enlarged assembly supporting structures suction and supply pipes and spiral chambers. Installation and fastening of side surfaces of anchor formwork panels with bolts and thrust bars. Manufacturing and laying jambs in the formwork of arched bridges. Repair of formwork curved, large-panel panels.
Must know: methods of marking and manufacturing complex wooden structures, connections and notches; rules for reading working drawings on the device wooden formwork, elements and structures of prefabricated buildings; arrangement of rigging devices used when installing wooden structures; methods of impregnation of wooden structures and parts with antiseptic and fire retardant compounds using compressor units.
§ 333. Carpenter 6th category
Characteristics of work. Carrying out complex formwork work. Installation of formwork for vaults, shells and domes. Assembly and installation of bridges with a span of over 50 m. Production of templates for marking the jambs of bridges. Assembly of arch formwork boxes. Assembly and installation of construction trusses and beams over 15 m.
Must know: methods of assembly and installation of complex wooden structures engineering structures; design and methods of constructing the types of formwork performed; methods for producing inventory templates for large-sized elements of building structures.
§ 334. Carpenter 7th category
Characteristics of work. Performing complex carpentry work in low-rise cottage construction, as well as during the restoration of monuments of wooden architecture in the construction of unique objects. Production and restoration of wooden kokoshniks, platbands, towels and other complex elements according to ready-made samples, drawings and sketches.
Must know: methods for manufacturing complex carpentry products and structural elements; methods for making complex connections and cuts.
Secondary vocational education required.