Chainsaw "Oleo-Mack 937": description and characteristics
Before choosing a chainsaw, you need to decide which class of tools will suit you best. As for the household models, they are designed for a very limited time in a month. Semi-professional saws, also called agricultural tools, are capable of tackling more demanding tasks. With their help, it will be possible to cut down trees and carry out construction work. Perhaps this type of equipment will suit you if you are planning to build a holiday home or bathhouse.
But professional saws can work at least 10 hours a day. Main feature this tool is the ability to use the engine without interruption. On sale today you can find special saws designed for manipulation inside the crown of trees. This is especially true when you need to take care of greenery. Such models usually have an optimal center of gravity and light weight. Among others, saws in the market. model "Oleo-Mack 937". This will be discussed below.
Description chainsaws "Oleo-Mac" 937 "
This model of equipment is used for sawing logs and logs, pruning branches and cutting trees. The tool is adapted to work with severe frosts... The effort when starting the engine is reduced due to magnetoelectronics with electronic control... The tool has an anti-vibration system that provides operator comfort. The device is characterized by its low weight and ease of use.
The main advantages of the model
The Oleo-Mack 937 chain saw has a system that enables smooth operation even in the winter season. The design has controls built into the lever. Thanks to this, the operator can easily turn the ignition on and off, as well as use half the gas and the choke. All this greatly simplifies the operation of the equipment.
The Oleo-Mack 937 has an automatic aluminum oil pump that guarantees zero oil consumption at idle speed. The force when starting the engine is reduced, and the piston with two rings ensures constant efficiency and long service life. It is also related to the forged connecting rod as well as the nickel-plated cylinder and crankshaft.
Safe operation is guaranteed by an inertial chain brake. The nylon air filter can be reused. Immediate engagement of the parts is made possible by a three-piece engagement. This almost eliminates slippage and ensures that parts wear evenly.
The Oleo-Mack 937 is also easy to use thanks to its anti-vibration system. Two-point transmission ensures a secure fit of the tool to the log. The dignity of the stop is also fixed, as well as good balancing. The unit is used after AI-92 gasoline and two-stroke engine oil. For the candle and filter, the manufacturer provides easy access, and use additional tool not required.
Specifications
Read the same
The Oleo-Mack 937 chain saw described in the article has a bar length of 41 cm. This household model has a 35.2 cm 3 motor. The device weighs 4.1 kg. The volume of the oil tank is equivalent to 0.22 liters. The groove width is 1.3 mm. The chain pitch is 3/8 ''. During operation, the equipment generates a noise level of 110 dB. The power of the device is 1.65 kW or 2.2 liters. from. The volume of the fuel tank is equivalent to 0.32 liters.
Quite often, consumers are faced with a problem when the Oleo-Mack 937 chainsaw throws itself on the gas (that is, at the slightest press of the power button). If such a problem arises, then it is necessary to understand the staking sequence. You must pay attention to fuel to keep your equipment running smoothly. If the mixture is not prepared correctly, the chainsaw will not start.
Oleo-mac chainsaw repair (oil pump, carburetor)
Repair Chainsaws Oleo-mac(oil pump, carburetor) Service website. Vkontakte community.
Adjustment chainsaw carburetor.
Chainsaw carburetor adjustment.
In order not to meet the above problem, it is necessary to use high quality gasoline. It is recommended to use oil that is produced by the manufacturer. In addition, be prepared in such a volume that will be sufficient only for 2 weeks, but no more. Otherwise, the composition will lose its octane property, which will cause problems with the instrument.
The Oleo-Mack 937 saw may stall if the spark plug is flooded when starting the mechanism. The candle should be washed and dried and cannot be pumped anyway. Excess fuel is drained through the spark plug hole. It is important to wait about half an hour after replacing the plug and try to start the tool.
If the chain saw stops when you press the gas, it can also result in no spark. This failure is sometimes indicated by a lack of contact between the wire and the tip of the plug. If the connection works correctly, but there is no spark, then electronic ignition is the cause. Such parts are not repairable, so they can only be replaced.
Read the same
After checking the spark plug, the consumer will be able to receive information that indicates a breakdown of the chainsaw. If the surface is dry, the failure could be caused by the cylinder not receiving fuel. Therefore, the entire feed path must be checked. If the spark plug is black from carbon deposits, the carburetor is not working properly, the fuel is excessively supplied, or the oil spills into the gasoline.
It is quite possible to repair the Oleo-Mack 937 chainsaw by the hands of the owner. If you encounter a problem where the instrument stalls with added gas, this may indicate that there is not enough fuel available. The cause may be a clogged carburetor and filter. Checking the first node should be entrusted to professionals, and the second. whatever, cleaning. The air filter is sometimes the cause of destruction and may be contaminated with dust.
Spare parts cost
No matter how good the tool is, you may need spare parts for your Oleo-Mack 937 chainsaw. Before buying, you need to compare the cost. For example, a piston group will cost the consumer 2,250 rubles. per set. But the starting fee can be purchased for 1840 rubles. The piston will cost 600 rubles. A cylinder for a chainsaw costs 1000 rubles. But the worm-bush. 380 rubles. Air filter sold at a price of 650 rubles. But magneto will cost you 1200 rubles.
User guide
You should study the operating instructions for the Oleo-Mack 937 chainsaw before purchasing the described equipment. From it you can learn what safety precautions should be followed to work without injury. At correct use the saw is a convenient and effective tool, otherwise the equipment can become a source of danger.
By turning on the machine, you create a low voltage electromagnetic field. This may interfere with the operation of the pacemaker. Use the saw in a well-ventilated area. Do not use the tool in environments where explosive or flammable vapors are present. The use of the device in closed rooms is excluded. Before starting work, all parts of the saw must be inspected, and protective devices... They need to work properly. Without an inertial brake lever, the chainsaw cannot be turned on.
How to start a chainsaw
If you are a beginner, then you are faced with the question of how to start the Oleo-Mack 937 chainsaw. Make sure the chain brake is engaged before starting the engine. To do this, use the chain brake lever. The handle guard must be moved towards the tire. The carburetor must be refilled by pressing the primer button several times. The starter lever is lowered to the stop.
The saw should be placed on the ground and then checked that the chain rotates freely and does not touch foreign objects. Before starting work, make sure that the saw does not come into contact with other objects. Do not attempt to start equipment with the tire in the material. The front grip is held with the left hand, the right foot is inserted into the base of the rear grip.
The operator must pull on the starter cord before starting the engine. The starter lever is in the middle position. Only after the engine can be started by acting on the starter rope. Then release the chain brake and wait a few seconds, then press the accelerator lever to unlock automatic device with half gas. On the final stage it is recommended to release the brake.
Output
The main characteristics of a chainsaw are power and weight. The first determines the machine's ability to pull the chain through the saw. This will affect cutting speed and depth of cut. Considering the size of the tire, you must choose the horsepower and engine power. You must also consider the expected load. If you buy a chain saw for solving internal problems, then 2 liters will be enough. with., while for professionals it is important to pay attention to the convenience of work, because the operation of the device will work for many hours every day.
The best infa about the adjustment of carburetors on a chainsaw. Greetings to you dear and most loyal readers of my blog. The price of a chainsaw partner 350 from 5 to 9 as shown in the carburetor little air enters the carburetor. How to adjust the "Ural" chainsaws as a chainsaw carburetor. In this article, I decided to see how to cut ...If you are the owner of a private house or from time to time go out of town to visit the cottage, then you just need a saw. It comes in handy for quickly and easily harvesting firewood, as well as trimming trees. Such a tool will be indispensable in the construction of verandas and gazebos. Hand saws and saws do not lose popularity, but the development technological progress allows the modern consumer to purchase excellent at an affordable cost.
Reviews of household models
The simplest representatives of this class are amateur instruments, which are represented by models with the ability to work for 45 minutes a day. Household models have a power of 2 kilowatts, they are equipped with low-profile circuits that help reduce vibration during use. If you are interested in the Oleo-Mac chainsaws, and you assume household tasks to solve with the help of equipment, then home craftsmen advise you to resort to optimal solution in the form of the above-described option. The performance of the chains installed in such tools is not so high. But there is also positive features, among which are ease of use, as well as lightness. The foreman will not feel strong stress on his hands in the process of performing tasks on the territory of the site. Such chainsaws "Oleo-Mak" will help to cope with carrying out small construction works, trimming trees and preparing firewood. According to users, such a chainsaw will be enough to maintain order in the garden.
Semi-professional models
This class includes tools that are powerful enough to cope with felling at a construction site. The only drawback, as the users emphasize, is the lack of the ability to work with the equipment long time... If you cut for 10 hours or more every day, then there will certainly be a need for repairs. The power of such units can vary from 2 to 3 kilowatts, however, by visiting the store, you will find models, most of which are characterized by a power equal to 2.5 kilowatts. The trunk diameter can be up to 40 centimeters. Such equipment weighs about 6 kilograms.
Semi-professional chainsaws "Oleo-Mak", according to builders and DIYers, are ideal option for those who are planning to build own house... In the process of carrying out these works, it will be necessary to process lumber, as in the creation of the system roof frame... If you are faced with the task of flooring, you will also not be able to do without gasoline saw... For those who like to work in the garden, such equipment will always come in handy.
Reviews of professional models
The most powerful class are professional models, the mentioned parameter of which starts from 2, 7 kilowatts. This characteristic can reach a figure of 6 kilowatts, and the tool will be capable of many hours of loads every day. Consumers argue that such a choice of a chainsaw cannot be justified for solving personal needs. Such an acquisition is advisable only if you plan to build a log house, and then a bath from the same material. In the future, such a tool will be useful for the whole winter. Professional chainsaws "Oleo-Mak" are purchased most often by representatives of organizations that specialize in. Such models are distinguished by their durability, which is confirmed by practice, which shows that the equipment is designed for 2000 hours of felling thick trees. If you are interested in the Oleo-Mac chainsaws, it is recommended to read reviews about them before the purchase.
At home, it will not be possible to cope with a professional option without special skills. This is due to the high level of vibration as the performance is very high. It is impossible not to note the very impressive weight, which exceeds 6 kilograms. This load will be noticeable for the hands, this is especially true for those who did not have experience with such equipment before.
Power Reviews
Users claim that power is the main factor that affects the machine's ability to handle solid wood. The higher the number, the faster you can cut a heavy trunk. In order to determine the needs, it is necessary to sort out the expected loads that will be applied to the tool. If there are no plans to work with thick logs, as well as to use the tool every day, then you can choose the Oleo-Mak chainsaw, the power of which does not exceed 2.6 kilowatts. Even if you have the amount you need to purchase professional equipment, do not be seduced by the high power. As users emphasize, this indicator will certainly entail an impressive weight. The unit will not be easy to operate.
Question: I bought an Oleo Mac 941 chainsaw. This is my first saw. I read the instructions. It is very short.
Initially, the chain brake was applied and it was not immediately possible to remove the cover, only after the brake was released until it clicked. I tried to start according to the instructions.
It didn't work out. I found instructions for starting Calm: "Before starting, unlock the gas lever and press the gas, then the switch to the down position
mode switch. Next is the starter.
After a few jerks, the engine "sneezes", then move the mode switch to the middle position and re-use the starter before starting.
After starting, briefly press the throttle lever to go to idle mode.
Is it suitable this method for Oleo Mac 941-С.
Does it have a combined throttle lever? (I prepared the fuel from 1 liter of 92 gasoline and 20 ml of branded oil, pumped fuel into the carburetor with a primer before starting until the transparent button was filled).
What am I doing wrong. Or a defective saw?
Answer: they blocked the chain with a brake (it does not affect the start, this is TB), pumped up the fuel with a primer, the throttle lever down and once or twice pulled the starter (until the "sneeze"), then move the lever to the middle position, pull the starter, after starting, briefly press trigger the throttle and thereby decelerate. Everything.
So on my chainsaw Oleo Mac 941 cx, I don’t think that yours is different.
I also remembered: under the cover there is a shutter-plug for changing the direction of the air flow into the motor (winter / summer), it must be installed according to the season.
Question: I decided to buy an Oleo Mac 941c chainsaw, but I can't decide on the version: with a chain pitch of 3/8, or with 0.325.
Which option is preferable and why?
Answer: Better probably 3 / 8-1.3. The saw is pretty weak at 3/8 it will be lighter than at 0.325.
Question: I bought an Oleo Mac 941 cx chainsaw a year ago, a good saw, it works perfectly. It was run-in and had a small malfunction.
When the engine has warmed up and, having cut the branches, the trunks, when the lever is switched to the stop position, the engine does not turn off and continues to work for several seconds from 10 to 20 seconds.
On initial start-up, when the engine is not too hot, it stops immediately. The service center said that it should be so.
I do not know if this is correct, please tell me. maybe after running in a lean mixture comes in and needs to be adjusted with screws L and H?
Answer: Wrong! Most likely, the spark plug does not match or the fuel is bad.
This is called "glow ignition", when the fuel mixture is ignited not by a spark, but spontaneously from the glowing electrodes of the spark plug.
This will not immediately disable the engine, but over time it will.
When you turn off the engine, you do not cut off the fuel, but interrupt the spark supply to the spark plug. Therefore, the carburetor has absolutely nothing to do with it. Fuel could be the cause.
Use 92 gasoline from a proven gas station. Either the spark plug is "very hot" i.e. has a low heat rating.
Unfortunately, neither one nor the other is covered by the guarantee. Try to change fuel and spark plug, I think the problem will go away.
We give him 20-30 seconds to idle to work. This is useful for the engine anyway.
Question: In operation, the Oleo Mak 941c chainsaw, almost new, was assembled independently from the box.
At first everything was fine, but then the builders used it, I don’t know how.
In general, the cord stopped retracting to the end - there were only 5 centimeters left to hang, I solved this problem by disassembling the case and winding an extra circle on the spring - now it is removed and sits in the nest a little tightly), but another problem arose - it works
about a minute, even a little less, and stalls.
As if there is no gasoline, although the tank is full. I loosened the chain tension - it didn't help, what else can I do?
Answer: If the saw stalls at idle, just turn the idle screw clockwise.
And if under load, then you need to adjust the carburetor. You also need to check and clean the air filter.
Perhaps the point is in it. If nothing changes, you need to adjust the carburetor, the idle screw will not change anything. To do this, you need to contact the service.
Adjustment carburetor chainsaw oleo mak 941c
How to deal with problems in Oleo-Mac chainsaws
Why does the Oleo Mac chainsaw stall, loses speed or does not start at all? It is essential for the owners to know such questions. chain chainsaw Oleo Mac, to do the right service and prevent Oleo-Mac chainsaw repairs.
- Actual fundamental structural elements in Oleo-Mak chainsaws:
- Obstacles at startup chainsaw Oleo-Mac:
- Problems with the Oleo-Mac chainsaw:
Vital structural elements in Oleo-Mac chainsaws
Italian chainsaws from Oleo-Mac are:
- Lightweight (household and semi-professional) - with a tire up to 45 cm, used in everyday life and for small business tasks.
- Professional - with a large saw bar, used for felling and harvesting lumber for sale.
The main elements that make up the Oleo-Mac chainsaw device of the original Italian production:
- The fuel mixture of oil and gasoline (1:50) is poured into the fuel tank (for Italian chainsaws, the volume of the gas tank is 0.23–0.8 liters, the largest gas tank for the Oleo-Mac GS 650 and Oleo-Mac GS 720 models is 0, 8 l, the smallest fuel tank - for the lightweight Oleo-Mac 932C chainsaw - 0.23 l).
- Then the resulting fuel mixture from the gas tank is taken into the carburetor for mixing with air.
- The air-saturated fuel mixture is pumped into the cylinder of a 2-stroke internal combustion engine, where it is ignited by a spark from a spark plug.
- The engine starts the movement of the crank mechanism, the purpose of which is to convert the reciprocating piston movements into shaft rotation.
- The shaft is connected to a centrifugal clutch with a sprocket that starts the saw chain. This is how the cutting takes place with the Oleo-Mac chainsaw.
V constructive device there is also:
- cleaning the air supplied to the carburetor
- saw headset consisting of a bar and a chain
- starter (manual or electric)
- spark plug
- muffler
- oil tank for automatic chain lubrication
- side chain tensioner
- an inertial brake (or, as it is also called, an electric chain brake to prevent kickback).
What is an Oleo-Mac chainsaw primer?
It is important for owners to know what a primer is in an Oleo-Mac chainsaw, because, thanks to the manual fuel pump for prefilling, called primer or suction, a cooled combustion engine starts faster. When starting the gasoline tool with a primer, it is possible to pre-fill the carburetor with gasoline; without using a primer, it will take more time to pump fuel with a carburetor pump by using a starter. Primers are used for engines after refueling with a fuel mixture or for cold engines that have not been used for a long time.
Chainsaw Oleo Mac where to fill the oil?
There are two types of chainsaw oil:
- Engine oil to be added to the fuel mixture for starting a 2-stroke gasoline internal combustion engine. There is no oil sump in 2-stroke engines, therefore it is necessary to add engine oil for 2-stroke engines directly to gasoline (Oleo-Mac branded oil in a ratio of 1:50 or any other engine oil - 1:40). This is necessary to lubricate the engine in order to avoid unwanted friction and the formation of carbon deposits on the engine components.
- The chain oil is poured into the oil tank (in chainsaws, the chain oil tank has a volume of 0.13–0.45 l). This is necessary to automatically lubricate the chain so it will last longer. The Italytools online store recommends Oleo Mac Ecolube branded chain oil.
Chainsaw carburetor adjustment.
Chainsaw carburetor adjustment.
How to adjust the carburetor on a chainsaw
by tightening the screw L or H the mixture is depleted, and we unscrew the mixture made a mistake made a reservation is enriched by.
Adjustment Oleo-Mak chainsaw carburetor
As mentioned above, the carburetor mixes air with the fuel mixture before it enters the internal combustion engine cylinder. Professional cleaning, tuning and adjusting the carburetor of the Oleo Mac chainsaw - mandatory procedure, performed at the manufacturer's plant, during pre-sale preparation and scheduled maintenance. Adjusting the carburetor should not be done with your own hands, because without the necessary qualifications and without using a tachometer, adjust the carburetor to optimal performance Not sure it's going to happen. The Authorized Service Center of the Italytools Dealer presupposes carrying out carburetor adjustments, as well as engine and chain oil changes, at every service.
Startup problems chainsaw Oleo-Mac
Why won't the Oleo-Mac chainsaw start?
The main reasons why the Oleo Mac chainsaw will not start are looking for, moving from simple to complex:
- Banal lack of fuel in the gas tank or insufficient amount to start.
- Inspect all fuel hoses and connections, note the crankshaft oil seals.
- Incorrectly prepared fuel mixture - prepare according to the instructions, use only that brand of gasoline with the corresponding octane number, no higher or lower. Remember to add engine oil to the fuel mixture.
- The mixture is made on the basis of production in 1-2 weeks, after this period, gasoline loses its octane quality.
- During start-up, the spark plug was filled with gasoline. It is necessary to dry the plug without igniting it, drain the excess fuel mixture, wait half an hour and then put the plug in place and repeat the start. It is advisable to have a spare spark plug if drying a gas-filled spark plug does not help.
- The problem may be not only in the spark plug, but also in the poor contact of its tip with the high-voltage wire. If the contact is normal, and there is no spark from turning on the starter, then the reason is in the electronic ignition unit. Unfortunately, this element is not repairable and needs to be replaced.
- If, when starting, the tool does not want to start, inspect the spark plug: its suspicious dryness means that there is no fuel entering the cylinder, so the reason may be in the carburetor. The presence of black carbon deposits indicates that an incorrect carburetor adjustment has been made, as a result of which the carburetor is feeding too much fuel mixture into the air / fuel mixture or there is too much engine oil in the mixture itself.
- More serious reasons need to be looked for in the cylinder-piston group. Signs - the presence of chips and scuffs on the cylinder and piston. Eliminate problems by re-boring the cylinder piston group... You also need to check the piston rings - the backlash when swinging the piston by the connecting rod in the cylinder indicates worn out piston rings that need to be replaced.
Why does the Oleo-Mac chainsaw start poorly?
Why the Oleo Mac chainsaw does not start well - the reason may be in the air filter clogged with dust.
Why stalls chainsaw Oleo-Mac when do you give gas?
Often on the forums of masters you can find attempts to find out what to do when the following problem appears: "Why does the Oleo-Mac chainsaw stall when I press the gas?"
Why does the Oleo-Mac chainsaw stall in this case? It is obvious that the fuel mixture does not flow well due to:
- Clogged fuel filter
- Clogged carburetor jet.
The fuel filter can be checked and cleaned very easily and quickly, and the carburetor jet should be checked at a service center.
With a drop in power and a stalling chainsaw at idle, the reason may be a clogged muffler. Cleaning the exhaust port and muffler of tarry exhaust deposits will help solve the problem.
Problems with the Oleo-Mac chainsaw
How to break in an Oleo-Mac chainsaw correctly?
One of the frequently asked questions from those who have just bought an Oleo-Mac chainsaw is whether a chainsaw needs to be run in and how to do it correctly?
The sequence of correct break-in of the Oleo-Mak gasoline saw:
- Make a fuel mixture and pour it into the gas tank.
- Run 5-10 full gas tanks at minimum load. Ideal conditions for this are 2-3 minutes of use at 2/3 of the maximum possible saw power, then 15-20 s - at idle speed. Combine business with pleasure as a load for running in - cut firewood with a small diameter of logs.
- Then you need to adjust the carburetor. Italian corporation Emak, which produces chain saws Oleo-Mac, the carburetor adjusts for the upcoming break-in.
Why chainsaw Does the Oleo Mac cut badly?
Why the Oleo-Mac chainsaw cuts obliquely and crookedly, the answer is obvious: the reason is saw chain, in violation of its cutting properties.
Most often why chainsaw Oleo-Mac cuts obliquely, due to the uneven dullness of the rows of chain teeth. Such uneven blunting occurs due to the following situations:
- During the cut, the chain hit a knot, a nail.
- Do not periodically turn the tire over so that the chain wears out evenly.
- During the last resharpening, the work was done poorly. This often happens during manual sharpening file. Whereas it is desirable to use a professional sharpening machine.
- Bent tire. Very often this problem occurs during felling. big trees if the saw was caught and the bar bent when the tree fell. Modern chainsaws have complex system and consist of several main units, which at times require maintenance and adjustment. Next, let's talk about how to adjust the carburetor on the Husk chainsaw ...
Chainsaws " Oleo-Mac ": reviews
If you are the owner personal home or from time to time you go out of town to visit the cottage, then you just need a saw. It will be needed for quick and easy preparation of firewood, as well as pruning trees. Such a tool will be indispensable in the construction of verandas and gazebos. Hand-held hacksaws and saws do not lose popularity, but the development of technological progress allows the modern consumer to purchase good gasoline saws at an affordable price.
Reviews of household models
The most common representatives of this class are amateur instruments, which are represented by models with the ability to work for 45 minutes a day. Household models have a capacity of 2 kV, low-profile chains are installed on them, which help to reduce vibration during operation. If you are intrigued by chainsaws " Oleo-Mac ", and to solve with the help of equipment you assume everyday tasks, then home craftsmen recommend for you to resort to good decision in the form of the above option. The performance of chains installed in similar tools is not that high. But there are also positive features, among which ease of use and ease. The foreman will not feel strong stress on his hands in the process of performing tasks on the terrain of the site. Such chainsaws " Oleo-Mac "will help to cope with small construction works, tree pruning and firewood preparation. As users say, such a chainsaw will be enough to maintain order in the garden.
Semi-professional models
This class includes tools that are powerful enough to cope with felling at a construction site. The only drawback, as the users emphasize, is the inability to work with the equipment for a long time. If sawing for 10 hours or more everyday, then there will certainly be a need for repairs. The power of such units can vary from 2 to 3 kilowatts, however, by visiting the store, you will find models, most of which are characterized by a power equal to 2.5 kilowatts. The trunk diameter can be up to 40 centimeters. Such equipment weighs about 6 kilograms.
Semi-professional chainsaws " Oleo-Mac ", according to builders and home craftsmen, are an ideal option for those who are planning to build their own house. In the process of carrying out these works, it will be necessary to process lumber, as in the creation of a roof frame system. If you are faced with the task of flooring, you will also need a gasoline saw. For those who like to work in the garden, such equipment will always come in handy.
Reviews of professional models
Read the same
The most powerful class are professional models, the mentioned parameter of which starts from 2, 7 kilowatts. This characteristic can reach a figure of 6 kilowatts, and the tool will be capable of many hours of loading. everyday... Consumers argue that such a choice of a chainsaw cannot be justified for solving personal needs. Such an acquisition is advisable only if you plan to build a log house, and then a bath from the same material. In the future, such a tool will come in handy for harvesting firewood for the whole winter. Professional chainsaws " Oleo-Mac "are purchased most often by representatives of organizations that specialize in felling. Such models are distinguished by their durability, as evidenced by practice, which shows that the equipment is designed for 2000 hours of felling thick trees. If you are interested in chainsaws " Oleo-Mac ", it is recommended to read reviews about them before the purchase.
Repair of the Oleo-mac Chainsaw (oil pump, carburetor)
Repair Chainsaws Oleo-mac(oil pump, carburetor) Service site - VKontakte Group.
Chainsaw Oleo mac 941C
Chainsaw Oleo-Mac 941 C presented Italian manufacturer garden equipment Oleo-mac... Equipped.
Chainsaw « Oleo-Mac "is a fairly popular product today. If you also decide to become its owner, then you will need to choose one of three varieties saw bars... Narrow strips are installed on household appliances that are designed to solve simple tasks... Buyers claim that the narrow tire is used in tandem with a low profile chain and has little to no kickback. This is necessary to reduce the risk of injury during operation.