Buying the chisels, do not forget to pay attention to the acquisition of such a product as a rubber cynica. This tool causes the least damage to the chisels themselves, although it has certain deficiencies. Let's deal with what exactly the ideal version of the Cyanka exist.
Rubber pins - and convenient, and safe!
Even such a simple tool as a mold has many different incarnations, of which the most popular are wooden and rubber products most different shapes. The main destination of the Cyanka is to be the "engine" of the chisels in the process of cutting parts. This happens as follows: In one hand, the wizard holds the chisel, attaching it to the point of the desired cut, and in the other hand holds a Cyanka, which he hits the end of the chisel's handle, giving it the power necessary for the shy. The ease of material makes it possible to avoid strong injuries of the hands and shits the tool itself.
Over the form, there are two types of xyiyanka - turning, draped from a solid piece of wood a beater resembling a bow or a small bit, and a hammer, which in shape resembles a sledgehammer, but is performed entirely of wood. The advantage of the first - in its convenience, after all, what point the beater does not hit, it will be correctly, which significantly reduces the load on the brush. The hammer molk allows you to apply stronger, concentrated strikes, however, it should be very confident to keep the tool in hand and follow the position of the head in relation to the chisel.
Therefore, the first are still more popular, although it will not work out this tool without a special workbench.
Disadvantages of materials - imperfect pyenki!
The beasts have a significant drawback - since they are performed from the workpiece with longitudinal fibers, with intensive use, the working part of such an image of such a time is reminded by the most real washcloth, from what kind of wood it would be done! The hammer sledgehammes have such problems less, however, as already noted, its form is far from ideal. Taking the basis of these two forms, manufacturers offer to our attention advanced, in their opinion, tools. For example, the "casing" from bronze is put on the accurate image.
To some extent it turns out really durable instrumentHowever, these are the chisels themselves! After several goals, the exhausted appearance will already have them, and not in the Cyan. Under such a tool you need to buy special, reinforced chisels, which is not always affordable. In this case, it would seem, the perfect version will be a rubber cusion! Of course, it is not all made of rubber - most often, it is a fairly thick layer of material or rubber inserts at the edges of the hammer. Indeed, the blows are obtained very gentle to the tools, but it is still inconvenient to work - the rubber has a sprinkler property.
It turns out that there is no ideal inquiry? After all, you need to combine the quality incompatible in our case:
- convenience;
- durability;
- lack of depreciation when hit;
- optimal weight.
Manufacturers have not yet suggested perfect optionAnd here the masters themselves learned to do it!
The perfect cynica with your own hands is not a tree, not rubber ...
Leather! We forgot about it! On the one hand, the material is sufficiently heavy, on the other hand, does not spring, and with the third - very durable. What options to create a queen? If you have previously purchased a turning tool, then at least you can wind up several layers working areaTo protect the Cyan from further damage. So that the skin does not fly, it is necessary to secure it reliably - glue into the start of winding one edge joinery glue to wood, and in the process of the winding, lubricate the skin itself.
In addition, if the dimensions of the material allow you to intercept from the base of the bits protruding the edges with a worm clamp or in the extreme case, make a winding from a strong twine. From above the protruding edges you can nail to the end of the Cyanniki with small carnations or simply cut - if you are well glued with layers, then this option will last long enough. However, it is much better to make a queen completely out of the skin, except for the handles. This option will be almost eternal! To do this, you will need a lot of skin, you can search for the market from the sellers of trimming, which they will gladly give if not for nothing, then cheap. You still need glue, a large washer, a drill and a fairly large bolt.
How to make a queen with your own hands - a step-by-step scheme
Step 1: Cooking the handle
It is best to take a solid wood for the handle, for example, oak or beech. Birch or walnut is also suitable. If it is possible to sharpen it on turning machine, then do it for the result convenient for hand round in cross section of the form. In addition, so you can make a ledge in the middle handle so that the layers of the skin were emphasis. If there is no lathe, then you can hide several layers of rope.
Step 2: Cooking Skin
You need to chop out a lot of round segments of the same size. To begin with, make one layout and take it on a piece of material. the right amount - Depending on the size of the working part itself, you will need 50 to 70 such circles. In addition, the role of skin thickness plays - than it is more, the less layers will need.
Step 3: We ride layers
Do in each layer hole so that you can drive the skin on the handle. Each layer we connect with the subsequent joinery of PVA, we try to press the layers to each other as close as possible. When all layers are risen and lubricated with glue, clamp the tool in vice or clamps to completely dry the glue.
Step 4: Krepim Puck
So that in the future, leather layers could not be able to fly, from the top end of the handle you need to secure a large washer - metal or wooden. To do this, we drill a hole in the handle itself, we apply the puck and screw the bolt tightly. Of course try to pick up optimal size For your handle, so that it does not crack. That's all! The skin will not fly into small sins in the process of work, the blows are actually visited in this material and do not create so much noise as when working ordinary wooden tool. Of course, it makes sense to mess with such a tool when you constantly work with the chisels and have already changed more than a dozen of the ciyayan, but the usual wooden hammer molt-iron is quite suitable for infrequent use!
How to make a tree from a tree - easier than a simple!
To do this, you do not even need a drawing of a drawing - everything is very simple! Find three sufficiently large maple trim or birch of the same thickness. More solid breeds Tree is not recommended, except for the handle, as they split from constant shocks. All trimming down to the same thickness - 2-3 cm. Take one of the bars, attach a handle to it and circle its contour. Then saw the ribbon bar or aupace saw So that the two pieces of chunks fit tightly to the handle. It is important that the handle and these two trimming have the same thickness, equal to the thickness of two wide bars brings.
We glue all the bars and the handle with joinery glue, clamping the clamps and leave at least 12 hours. When everything goes, mark the rounded profile of the brisk and sideways and doinched unnecessary. How should I walk out emery paper And cover the wood of Olifa. You will have two days in the manufacture of such a tool, of which only a few hours will be devoted directly.
- See chrome bracket handle.
Kiyanka do it yourself aslan. Wrote in March 9th, 2018
In general, now there is a choice of big in cushenians, it is great for the work of the Cyanka purchased from white rubber. White because it does not leave black spots from use. I have this. I have another self-made, made from the cushion from the truck. In general, I have a total of 25 hammers, a sledgehammer and a cue.
But I adhere to the opinion that it is more pleasant to work as a beautiful tool. And I decided to make myself a beautiful red tree. Well, why not? Someone will say that this is a guinea, but I get pleasure from work in the workshop. If I were pleased with the pleasure of lace on the queen, I would clutch them :)
Someone will outrage it, guys, you won't be milk. Yes, I use a hand tool.
I decided to make a pen from a stick from the oak pallet, and the headband was decorated with a sapele. Was downloaded a drawing from the expanses of the Internet
Not that I didn't have something to do from what a pen, but first needed to look at the wood pattern. Someone told me that it kind of Japanese oak. In Japan, I did not say, I will not say.
Cut oak and sapel into black.
Cut and forth, on the plane. I have a flight, and Fuganok (to him with such a chosper and to approach dangerous), but I am doing my own pleasure.
I will have a sapele at the edges, and inside the same oak. We collect on the glue the block. The handle is made on the reverse wedge, i.e. During operation, it will only be litprocessed. The handle is not glued.
Now the chisel and the plane form the squeaks, as well as knock for chamfers.
I decided to stick a veneer strips on the handle, and somehow rustic it turns out + there is a track from the nail. Stick from the pallet. After knocked down a chamfer on the handle to lay in hand.
And here is our result after coating with oil.
I use the painting. In the hand lies well, you take immediately right, hands feel the orientation of the shock part due to a rectangular handle.
Buying the chisels, do not forget to pay attention to the acquisition of such a product as a rubber cynica. This tool causes the least damage to the chisels themselves, although there are certain disadvantages. Let's deal with what exactly the ideal version of the Cyanka exist.
Rubber pins - and convenient, and safe!
Even such a simple tool, like a mile, has many different incarnations, of which the most popular are wooden and rubber products of various shapes. The main purpose of the Cyanka is the "engine" of the chisels in the process of cutting parts. This happens as follows: In one hand, the wizard holds the chisel, attaching it to the point of the desired cut, and in the other hand holds a Cyanka, which he hits the end of the chisel's handle, giving it the power necessary for the shy. The ease of material makes it possible to avoid strong injuries of the hands and shits the tool itself.
Over the form, there are two types of xyiyanka - turning, draped from a solid piece of wood a beater resembling a bow or a small bit, and a hammer, which in shape resembles a sledgehammer, but is performed entirely of wood. The advantage of the first - in its convenience, after all, what point the beater does not hit, it will be correctly, which significantly reduces the load on the brush. The hammer molk allows you to apply stronger, concentrated strikes, however, it should be very confident to keep the tool in hand and follow the position of the head in relation to the chisel.
Therefore, the first are still more popular, although it will not work out this tool without a special workbench.
Disadvantages of materials - imperfect pyenki!
The beasts have a significant drawback - since they are performed from the workpiece with longitudinal fibers, with intensive use, the working part of such an image of such a time is reminded by the most real washcloth, from what kind of wood it would be done! The hammer sledgehammes have such problems less, however, as already noted, its form is far from ideal. Taking the basis of these two forms, manufacturers offer to our attention advanced, in their opinion, tools. For example, the "casing" from bronze is put on the accurate image.
To some extent, it turns out a really durable tool, but the chisels themselves cease to be. After several goals, the exhausted appearance will already have them, and not in the Cyan. Under such a tool you need to buy special, reinforced chisels, which is not always affordable. In this case, it would seem, the perfect version will be a rubber cusion! Of course, it is not all made of rubber - most often, it is a fairly thick layer of material or rubber inserts at the edges of the hammer. Indeed, the blows are obtained very gentle to the tools, but it is still inconvenient to work - the rubber has a sprinkler property.
It turns out that there is no ideal inquiry? After all, you need to combine the quality incompatible in our case:
- convenience;
- durability;
- lack of depreciation when hit;
- optimal weight.
Manufacturers have not yet proposed the perfect option, but the masters themselves learned to do it!
The perfect cynica with your own hands is not a tree, not rubber ...
Leather! We forgot about it! On the one hand, the material is sufficiently heavy, on the other hand, does not spring, and with the third - very durable. What options to create a queen? If you have previously purchased a turning tool, then at a minimum, you can wind up a multi-layer working area to protect the pivot from further damage. So that the skin does not fly, it is necessary to secure it reliably - glue into the start of winding one edge joinery glue to wood, and in the process of the winding, lubricate the skin itself.
In addition, if the dimensions of the material allow you to intercept from the base of the bits protruding the edges with a worm clamp or in the extreme case, make a winding from a strong twine. From above the protruding edges you can nail to the end of the Cyanniki with small carnations or simply cut - if you are well glued with layers, then this option will last long enough. However, it is much better to make a queen completely out of the skin, except for the handles. This option will be almost eternal! To do this, you will need a lot of skin, you can search for the market from the sellers of trimming, which they will gladly give if not for nothing, then cheap. You still need glue, a large washer, a drill and a fairly large bolt.
How to make a queen with your own hands - a step-by-step scheme
Step 1: Cooking the handle
It is best to take a solid wood for the handle, for example, oak or beech. Birch or walnut is also suitable. If it is possible to sharpen it on the lathe, then do it for the result convenient for the hand round in cross section of the form. In addition, so you can make a ledge in the middle handle so that the layers of the skin were emphasis. If there is no lathe, then you can hide several layers of rope.
Step 2: Cooking Skin
You need to chop out a lot of round segments of the same size. To begin with, make one layout and take it on it on a piece of material the desired number - depending on the size of the working part itself it will be necessary from 50 to 70 such circles. In addition, the role of skin thickness plays - than it is more, the less layers will need.
Step 3: We ride layers
Do in each layer hole so that you can drive the skin on the handle. Each layer we connect with the subsequent, we try to press the layers to each other as close as possible. When all layers are risen and lubricated with glue, clamp the tool in vice or clamps to completely dry the glue.
Step 4: Krepim Puck
So that in the future, leather layers could not be able to fly, from the top end of the handle you need to secure a large washer - metal or wooden. To do this, we drill a hole in the handle itself, we apply the puck and screw the bolt tightly. Of course, try to choose the optimal size for your handle so that it does not crack.
That's all! The skin will not fly into small sins in the process of work, the blows are actually visited in this material and do not create so much noise as when working in a conventional wooden tool. Of course, it makes sense to mess with such a tool when you constantly work with the chisels and have already changed more than a dozen of the ciyayan, but the usual wooden hammer molt-iron is quite suitable for infrequent use!
How to make a tree from a tree - easier than a simple!
To do this, you do not even need a drawing of a drawing - everything is very simple! Find three sufficiently large maple trim or birch of the same thickness. It is not recommended to take more solid wood species, except for the handle, as they split from constant shocks. All trimming down to the same thickness - 2-3 cm. Take one of the bars, attach a handle to it and circle its contour. Then he cut the ribbon bar or so that the two piece of chunks fit tightly to the handle. It is important that the handle and these two trimming have the same thickness, equal to the thickness of two wide bars brings.
We glue all the bars and the handle with joinery glue, clamping the clamps and leave at least 12 hours. When everything goes, mark the rounded profile of the brisk and sideways and doinched unnecessary. How should go sandpaper and cover the wood of Olifa. You will have two days in the manufacture of such a tool, of which only a few hours will be devoted directly.
Hammer - tool in the farm needed. But besides the usual, metal knob, it may take a hammer with a rubber head. It is used for various needs, but, frankly, he is pretty hard. Alternative to him can be wooden hammer. - The instrument in the economy is necessary. But besides the usual, metal knob, you may need a hammer with a rubber head
Necessary materials:
1) Wooden Poles
2) Grinding machine
3) tape saw
4) lathe
5) Metal pin
6) varnish, impregnation for wood
Instructions for manufacture
Step number 1: Choose suitable wood
Choosing a wooden floor, which will subsequently become a hammer, pay attention to the hardness of the selected breed. The tree should not be unnecessarily soft and pliable, otherwise the hammer will come into disrepair very quickly, but also too hard wood is not suitable, because it will be difficult to saw it even with the help of a woodworking machine.
Step number 2: Wooden knob
The blank for the embolly will have a cubic shape. Dimensions are defined arbitrarily: as soon as you consider that the workpiece meets your expectations, round sharp corners On the machine, polish the head of the hammer and stop working on it, go to drink pen.
Step No. 3: Drink Handle
For the handle, maple wood will fit well. Proceed it with ribbon sawAnd then bring to mind on the lathe. Since all sizes are arbitrary, then focus only on your own sensations. As soon as it seems to you that the handle comfortably falls into the hand, put it aside and drill the hole of the corresponding diameter.
Step No. 4: Final Barcode
Wear your head on the handle so that the handle has passed the knobs through and thoring a bit. In order to secure the design, use a small metal pin.
The hammer can be covered with impregnation for wood, varnish or wax, to give him a beautiful view.
I made this hammer a couple of years ago. The need was in it because I had to draw it every paving slab. He softens blows, something like a rubber hammer. Only the hammer made of rubber does not serve for a long time. Since it is not made of rubber, as it should be, at least with the addition of it.
Of course, the designs do not boast, but nevertheless, the quality of such a hammer is good.
The old mint (in the photo) came into disrepair! A tree from long use has already crackled and fumbled. It was necessary to urgently replace the new one. On the computer, the model of the future of the future of the Cyan, printed the picture on paper and began to work.
Step 1: Materials and Tools
For this project, we will need several pieces of wood. This is a great opportunity to use unnecessary wood waste. Many of my familiar waste does not give a chance to be useful, they simply turn out to be or burned, or burned like firewood.
I am not a master of carpentry, but such a hammer, I think will be able to perform anyone.
You will need:
- Saw;
- Carpentry glue;
- Some clamps, clamps
I used the saw - circular. I believe that it is possible to cut pieces of wood with it the fastest. After cutting, we take emotion paper and clean the sides.
Step 2: Cut
Dimensions of the image each chooses at its discretion. It is not critical. The design of the hammer can also be done independently and under their tastes.
I made the length of my handle 350 mm. Handle width 40 mm. At one end, and on another 30 mm. Achieve such sizes can be easily when there is table Pila. WITH manual saw It will be a bit hard, but everything is real.
Step 3: Collect
We put the handle exactly in the middle of one of the pieces of 120x90 mm. So that 25 mm was from the thick side of the end of the handle. She must look out of the shared hammer head. Now we glue all sliced \u200b\u200blumps with each other (seen in the photo). Do not forget to remove the hammer handle, it should not be glued with a hammer.
Clips fasten the hammer for better gluing All parts of the hammer. In places where the glue of the output, we remove it. We also clean the glue in the hole where the hammer handle includes. Until complete drying, it is necessary to leave our construction for at least 30 minutes. Something resembles the layers of sandwich and seasoning arising from it. Of course, it will look terribly, but in the following stages magic will occur.
Step 4: Processing the hammer
Now that you have a hammer (head) and everything is firmly glued, it's time to make it even more beautiful. I made cuts on the hammer handle, in order to come down a small deepening. This will give the convenience of lying handles in hand, and after and pleasant work with the Cyonya.
Take the handle and cut the deepening, which was mentioned above. Handle handle angles, making them more showing (rounded). If the pen has too long, do it.
After the work done, we insert the handle in the hammer.
Step 5: Pruning and Refining
We proceed with sandpaper all irregularities on the handle, for a smoother surface and avoiding further bypass in your hand. At the end of the handle, I drilled a hole in order to continue the opportunity to store it in a hanging condition.
Step 6: Ready Hammer Kiyanka
If you wish to stick the handle to the head, you can do it, but I did not do this, she doesn't go anywhere.
Waiting for your comments, dear friends!